linux/sound/soc/codecs/tas5086.c
<<
>>
Prefs
   1/*
   2 * TAS5086 ASoC codec driver
   3 *
   4 * Copyright (c) 2013 Daniel Mack <zonque@gmail.com>
   5 *
   6 * This program is free software; you can redistribute it and/or
   7 * modify it under the terms of the GNU General Public License
   8 * as published by the Free Software Foundation; either version 2
   9 * of the License, or (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 *
  16 * TODO:
  17 *  - implement DAPM and input muxing
  18 *  - implement modulation limit
  19 *  - implement non-default PWM start
  20 *
  21 * Note that this chip has a very unusual register layout, specifically
  22 * because the registers are of unequal size, and multi-byte registers
  23 * require bulk writes to take effect. Regmap does not support that kind
  24 * of devices.
  25 *
  26 * Currently, the driver does not touch any of the registers >= 0x20, so
  27 * it doesn't matter because the entire map can be accessed as 8-bit
  28 * array. In case more features will be added in the future
  29 * that require access to higher registers, the entire regmap H/W I/O
  30 * routines have to be open-coded.
  31 */
  32
  33#include <linux/module.h>
  34#include <linux/slab.h>
  35#include <linux/delay.h>
  36#include <linux/gpio.h>
  37#include <linux/i2c.h>
  38#include <linux/regmap.h>
  39#include <linux/regulator/consumer.h>
  40#include <linux/spi/spi.h>
  41#include <linux/of.h>
  42#include <linux/of_device.h>
  43#include <linux/of_gpio.h>
  44#include <sound/pcm.h>
  45#include <sound/pcm_params.h>
  46#include <sound/soc.h>
  47#include <sound/tlv.h>
  48#include <sound/tas5086.h>
  49
  50#define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE  |         \
  51                             SNDRV_PCM_FMTBIT_S20_3LE |         \
  52                             SNDRV_PCM_FMTBIT_S24_3LE)
  53
  54#define TAS5086_PCM_RATES   (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100  | \
  55                             SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200  | \
  56                             SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \
  57                             SNDRV_PCM_RATE_192000)
  58
  59/*
  60 * TAS5086 registers
  61 */
  62#define TAS5086_CLOCK_CONTROL           0x00    /* Clock control register  */
  63#define TAS5086_CLOCK_RATE(val)         (val << 5)
  64#define TAS5086_CLOCK_RATE_MASK         (0x7 << 5)
  65#define TAS5086_CLOCK_RATIO(val)        (val << 2)
  66#define TAS5086_CLOCK_RATIO_MASK        (0x7 << 2)
  67#define TAS5086_CLOCK_SCLK_RATIO_48     (1 << 1)
  68#define TAS5086_CLOCK_VALID             (1 << 0)
  69
  70#define TAS5086_DEEMPH_MASK             0x03
  71#define TAS5086_SOFT_MUTE_ALL           0x3f
  72
  73#define TAS5086_DEV_ID                  0x01    /* Device ID register */
  74#define TAS5086_ERROR_STATUS            0x02    /* Error status register */
  75#define TAS5086_SYS_CONTROL_1           0x03    /* System control register 1 */
  76#define TAS5086_SERIAL_DATA_IF          0x04    /* Serial data interface register  */
  77#define TAS5086_SYS_CONTROL_2           0x05    /* System control register 2 */
  78#define TAS5086_SOFT_MUTE               0x06    /* Soft mute register */
  79#define TAS5086_MASTER_VOL              0x07    /* Master volume  */
  80#define TAS5086_CHANNEL_VOL(X)          (0x08 + (X))    /* Channel 1-6 volume */
  81#define TAS5086_VOLUME_CONTROL          0x09    /* Volume control register */
  82#define TAS5086_MOD_LIMIT               0x10    /* Modulation limit register */
  83#define TAS5086_PWM_START               0x18    /* PWM start register */
  84#define TAS5086_SURROUND                0x19    /* Surround register */
  85#define TAS5086_SPLIT_CAP_CHARGE        0x1a    /* Split cap charge period register */
  86#define TAS5086_OSC_TRIM                0x1b    /* Oscillator trim register */
  87#define TAS5086_BKNDERR                 0x1c
  88#define TAS5086_INPUT_MUX               0x20
  89#define TAS5086_PWM_OUTPUT_MUX          0x25
  90
  91#define TAS5086_MAX_REGISTER            TAS5086_PWM_OUTPUT_MUX
  92
  93#define TAS5086_PWM_START_MIDZ_FOR_START_1      (1 << 7)
  94#define TAS5086_PWM_START_MIDZ_FOR_START_2      (1 << 6)
  95#define TAS5086_PWM_START_CHANNEL_MASK          (0x3f)
  96
  97/*
  98 * Default TAS5086 power-up configuration
  99 */
 100static const struct reg_default tas5086_reg_defaults[] = {
 101        { 0x00, 0x6c },
 102        { 0x01, 0x03 },
 103        { 0x02, 0x00 },
 104        { 0x03, 0xa0 },
 105        { 0x04, 0x05 },
 106        { 0x05, 0x60 },
 107        { 0x06, 0x00 },
 108        { 0x07, 0xff },
 109        { 0x08, 0x30 },
 110        { 0x09, 0x30 },
 111        { 0x0a, 0x30 },
 112        { 0x0b, 0x30 },
 113        { 0x0c, 0x30 },
 114        { 0x0d, 0x30 },
 115        { 0x0e, 0xb1 },
 116        { 0x0f, 0x00 },
 117        { 0x10, 0x02 },
 118        { 0x11, 0x00 },
 119        { 0x12, 0x00 },
 120        { 0x13, 0x00 },
 121        { 0x14, 0x00 },
 122        { 0x15, 0x00 },
 123        { 0x16, 0x00 },
 124        { 0x17, 0x00 },
 125        { 0x18, 0x3f },
 126        { 0x19, 0x00 },
 127        { 0x1a, 0x18 },
 128        { 0x1b, 0x82 },
 129        { 0x1c, 0x05 },
 130};
 131
 132static int tas5086_register_size(struct device *dev, unsigned int reg)
 133{
 134        switch (reg) {
 135        case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR:
 136                return 1;
 137        case TAS5086_INPUT_MUX:
 138        case TAS5086_PWM_OUTPUT_MUX:
 139                return 4;
 140        }
 141
 142        dev_err(dev, "Unsupported register address: %d\n", reg);
 143        return 0;
 144}
 145
 146static bool tas5086_accessible_reg(struct device *dev, unsigned int reg)
 147{
 148        switch (reg) {
 149        case 0x0f:
 150        case 0x11 ... 0x17:
 151        case 0x1d ... 0x1f:
 152                return false;
 153        default:
 154                return true;
 155        }
 156}
 157
 158static bool tas5086_volatile_reg(struct device *dev, unsigned int reg)
 159{
 160        switch (reg) {
 161        case TAS5086_DEV_ID:
 162        case TAS5086_ERROR_STATUS:
 163                return true;
 164        }
 165
 166        return false;
 167}
 168
 169static bool tas5086_writeable_reg(struct device *dev, unsigned int reg)
 170{
 171        return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID);
 172}
 173
 174static int tas5086_reg_write(void *context, unsigned int reg,
 175                              unsigned int value)
 176{
 177        struct i2c_client *client = context;
 178        unsigned int i, size;
 179        uint8_t buf[5];
 180        int ret;
 181
 182        size = tas5086_register_size(&client->dev, reg);
 183        if (size == 0)
 184                return -EINVAL;
 185
 186        buf[0] = reg;
 187
 188        for (i = size; i >= 1; --i) {
 189                buf[i] = value;
 190                value >>= 8;
 191        }
 192
 193        ret = i2c_master_send(client, buf, size + 1);
 194        if (ret == size + 1)
 195                return 0;
 196        else if (ret < 0)
 197                return ret;
 198        else
 199                return -EIO;
 200}
 201
 202static int tas5086_reg_read(void *context, unsigned int reg,
 203                             unsigned int *value)
 204{
 205        struct i2c_client *client = context;
 206        uint8_t send_buf, recv_buf[4];
 207        struct i2c_msg msgs[2];
 208        unsigned int size;
 209        unsigned int i;
 210        int ret;
 211
 212        size = tas5086_register_size(&client->dev, reg);
 213        if (size == 0)
 214                return -EINVAL;
 215
 216        send_buf = reg;
 217
 218        msgs[0].addr = client->addr;
 219        msgs[0].len = sizeof(send_buf);
 220        msgs[0].buf = &send_buf;
 221        msgs[0].flags = 0;
 222
 223        msgs[1].addr = client->addr;
 224        msgs[1].len = size;
 225        msgs[1].buf = recv_buf;
 226        msgs[1].flags = I2C_M_RD;
 227
 228        ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 229        if (ret < 0)
 230                return ret;
 231        else if (ret != ARRAY_SIZE(msgs))
 232                return -EIO;
 233
 234        *value = 0;
 235
 236        for (i = 0; i < size; i++) {
 237                *value <<= 8;
 238                *value |= recv_buf[i];
 239        }
 240
 241        return 0;
 242}
 243
 244static const char * const supply_names[] = {
 245        "dvdd", "avdd"
 246};
 247
 248struct tas5086_private {
 249        struct regmap   *regmap;
 250        unsigned int    mclk, sclk;
 251        unsigned int    format;
 252        bool            deemph;
 253        unsigned int    charge_period;
 254        unsigned int    pwm_start_mid_z;
 255        /* Current sample rate for de-emphasis control */
 256        int             rate;
 257        /* GPIO driving Reset pin, if any */
 258        int             gpio_nreset;
 259        struct          regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
 260};
 261
 262static int tas5086_deemph[] = { 0, 32000, 44100, 48000 };
 263
 264static int tas5086_set_deemph(struct snd_soc_component *component)
 265{
 266        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 267        int i, val = 0;
 268
 269        if (priv->deemph) {
 270                for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) {
 271                        if (tas5086_deemph[i] == priv->rate) {
 272                                val = i;
 273                                break;
 274                        }
 275                }
 276        }
 277
 278        return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1,
 279                                  TAS5086_DEEMPH_MASK, val);
 280}
 281
 282static int tas5086_get_deemph(struct snd_kcontrol *kcontrol,
 283                              struct snd_ctl_elem_value *ucontrol)
 284{
 285        struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
 286        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 287
 288        ucontrol->value.integer.value[0] = priv->deemph;
 289
 290        return 0;
 291}
 292
 293static int tas5086_put_deemph(struct snd_kcontrol *kcontrol,
 294                              struct snd_ctl_elem_value *ucontrol)
 295{
 296        struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
 297        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 298
 299        priv->deemph = ucontrol->value.integer.value[0];
 300
 301        return tas5086_set_deemph(component);
 302}
 303
 304
 305static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 306                                  int clk_id, unsigned int freq, int dir)
 307{
 308        struct snd_soc_component *component = codec_dai->component;
 309        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 310
 311        switch (clk_id) {
 312        case TAS5086_CLK_IDX_MCLK:
 313                priv->mclk = freq;
 314                break;
 315        case TAS5086_CLK_IDX_SCLK:
 316                priv->sclk = freq;
 317                break;
 318        }
 319
 320        return 0;
 321}
 322
 323static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai,
 324                               unsigned int format)
 325{
 326        struct snd_soc_component *component = codec_dai->component;
 327        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 328
 329        /* The TAS5086 can only be slave to all clocks */
 330        if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {
 331                dev_err(component->dev, "Invalid clocking mode\n");
 332                return -EINVAL;
 333        }
 334
 335        /* we need to refer to the data format from hw_params() */
 336        priv->format = format;
 337
 338        return 0;
 339}
 340
 341static const int tas5086_sample_rates[] = {
 342        32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000
 343};
 344
 345static const int tas5086_ratios[] = {
 346        64, 128, 192, 256, 384, 512
 347};
 348
 349static int index_in_array(const int *array, int len, int needle)
 350{
 351        int i;
 352
 353        for (i = 0; i < len; i++)
 354                if (array[i] == needle)
 355                        return i;
 356
 357        return -ENOENT;
 358}
 359
 360static int tas5086_hw_params(struct snd_pcm_substream *substream,
 361                             struct snd_pcm_hw_params *params,
 362                             struct snd_soc_dai *dai)
 363{
 364        struct snd_soc_component *component = dai->component;
 365        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 366        int val;
 367        int ret;
 368
 369        priv->rate = params_rate(params);
 370
 371        /* Look up the sample rate and refer to the offset in the list */
 372        val = index_in_array(tas5086_sample_rates,
 373                             ARRAY_SIZE(tas5086_sample_rates), priv->rate);
 374
 375        if (val < 0) {
 376                dev_err(component->dev, "Invalid sample rate\n");
 377                return -EINVAL;
 378        }
 379
 380        ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
 381                                 TAS5086_CLOCK_RATE_MASK,
 382                                 TAS5086_CLOCK_RATE(val));
 383        if (ret < 0)
 384                return ret;
 385
 386        /* MCLK / Fs ratio */
 387        val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios),
 388                             priv->mclk / priv->rate);
 389        if (val < 0) {
 390                dev_err(component->dev, "Invalid MCLK / Fs ratio\n");
 391                return -EINVAL;
 392        }
 393
 394        ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
 395                                 TAS5086_CLOCK_RATIO_MASK,
 396                                 TAS5086_CLOCK_RATIO(val));
 397        if (ret < 0)
 398                return ret;
 399
 400
 401        ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
 402                                 TAS5086_CLOCK_SCLK_RATIO_48,
 403                                 (priv->sclk == 48 * priv->rate) ? 
 404                                        TAS5086_CLOCK_SCLK_RATIO_48 : 0);
 405        if (ret < 0)
 406                return ret;
 407
 408        /*
 409         * The chip has a very unituitive register mapping and muxes information
 410         * about data format and sample depth into the same register, but not on
 411         * a logical bit-boundary. Hence, we have to refer to the format passed
 412         * in the set_dai_fmt() callback and set up everything from here.
 413         *
 414         * First, determine the 'base' value, using the format ...
 415         */
 416        switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) {
 417        case SND_SOC_DAIFMT_RIGHT_J:
 418                val = 0x00;
 419                break;
 420        case SND_SOC_DAIFMT_I2S:
 421                val = 0x03;
 422                break;
 423        case SND_SOC_DAIFMT_LEFT_J:
 424                val = 0x06;
 425                break;
 426        default:
 427                dev_err(component->dev, "Invalid DAI format\n");
 428                return -EINVAL;
 429        }
 430
 431        /* ... then add the offset for the sample bit depth. */
 432        switch (params_width(params)) {
 433        case 16:
 434                val += 0;
 435                break;
 436        case 20:
 437                val += 1;
 438                break;
 439        case 24:
 440                val += 2;
 441                break;
 442        default:
 443                dev_err(component->dev, "Invalid bit width\n");
 444                return -EINVAL;
 445        }
 446
 447        ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val);
 448        if (ret < 0)
 449                return ret;
 450
 451        /* clock is considered valid now */
 452        ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
 453                                 TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID);
 454        if (ret < 0)
 455                return ret;
 456
 457        return tas5086_set_deemph(component);
 458}
 459
 460static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 461{
 462        struct snd_soc_component *component = dai->component;
 463        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 464        unsigned int val = 0;
 465
 466        if (mute)
 467                val = TAS5086_SOFT_MUTE_ALL;
 468
 469        return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val);
 470}
 471
 472static void tas5086_reset(struct tas5086_private *priv)
 473{
 474        if (gpio_is_valid(priv->gpio_nreset)) {
 475                /* Reset codec - minimum assertion time is 400ns */
 476                gpio_direction_output(priv->gpio_nreset, 0);
 477                udelay(1);
 478                gpio_set_value(priv->gpio_nreset, 1);
 479
 480                /* Codec needs ~15ms to wake up */
 481                msleep(15);
 482        }
 483}
 484
 485/* charge period values in microseconds */
 486static const int tas5086_charge_period[] = {
 487          13000,  16900,   23400,   31200,   41600,   54600,   72800,   96200,
 488         130000, 156000,  234000,  312000,  416000,  546000,  728000,  962000,
 489        1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000,
 490};
 491
 492static int tas5086_init(struct device *dev, struct tas5086_private *priv)
 493{
 494        int ret, i;
 495
 496        /*
 497         * If any of the channels is configured to start in Mid-Z mode,
 498         * configure 'part 1' of the PWM starts to use Mid-Z, and tell
 499         * all configured mid-z channels to start start under 'part 1'.
 500         */
 501        if (priv->pwm_start_mid_z)
 502                regmap_write(priv->regmap, TAS5086_PWM_START,
 503                             TAS5086_PWM_START_MIDZ_FOR_START_1 |
 504                                priv->pwm_start_mid_z);
 505
 506        /* lookup and set split-capacitor charge period */
 507        if (priv->charge_period == 0) {
 508                regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0);
 509        } else {
 510                i = index_in_array(tas5086_charge_period,
 511                                   ARRAY_SIZE(tas5086_charge_period),
 512                                   priv->charge_period);
 513                if (i >= 0)
 514                        regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE,
 515                                     i + 0x08);
 516                else
 517                        dev_warn(dev,
 518                                 "Invalid split-cap charge period of %d ns.\n",
 519                                 priv->charge_period);
 520        }
 521
 522        /* enable factory trim */
 523        ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00);
 524        if (ret < 0)
 525                return ret;
 526
 527        /* start all channels */
 528        ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20);
 529        if (ret < 0)
 530                return ret;
 531
 532        /* mute all channels for now */
 533        ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE,
 534                           TAS5086_SOFT_MUTE_ALL);
 535        if (ret < 0)
 536                return ret;
 537
 538        return 0;
 539}
 540
 541/* TAS5086 controls */
 542static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1);
 543
 544static const struct snd_kcontrol_new tas5086_controls[] = {
 545        SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL,
 546                       0, 0xff, 1, tas5086_dac_tlv),
 547        SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume",
 548                         TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1),
 549                         0, 0xff, 1, tas5086_dac_tlv),
 550        SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume",
 551                         TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3),
 552                         0, 0xff, 1, tas5086_dac_tlv),
 553        SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume",
 554                         TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5),
 555                         0, 0xff, 1, tas5086_dac_tlv),
 556        SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0,
 557                            tas5086_get_deemph, tas5086_put_deemph),
 558};
 559
 560/* Input mux controls */
 561static const char *tas5086_dapm_sdin_texts[] =
 562{
 563        "SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R",
 564        "SDIN3-L", "SDIN3-R", "Ground (0)", "nc"
 565};
 566
 567static const struct soc_enum tas5086_dapm_input_mux_enum[] = {
 568        SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts),
 569        SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts),
 570        SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts),
 571        SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8,  8, tas5086_dapm_sdin_texts),
 572        SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4,  8, tas5086_dapm_sdin_texts),
 573        SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0,  8, tas5086_dapm_sdin_texts),
 574};
 575
 576static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = {
 577        SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]),
 578        SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]),
 579        SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]),
 580        SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]),
 581        SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]),
 582        SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]),
 583};
 584
 585/* Output mux controls */
 586static const char *tas5086_dapm_channel_texts[] =
 587        { "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux",
 588          "Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" };
 589
 590static const struct soc_enum tas5086_dapm_output_mux_enum[] = {
 591        SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts),
 592        SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts),
 593        SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts),
 594        SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8,  6, tas5086_dapm_channel_texts),
 595        SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4,  6, tas5086_dapm_channel_texts),
 596        SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0,  6, tas5086_dapm_channel_texts),
 597};
 598
 599static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = {
 600        SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]),
 601        SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]),
 602        SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]),
 603        SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]),
 604        SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]),
 605        SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]),
 606};
 607
 608static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = {
 609        SND_SOC_DAPM_INPUT("SDIN1-L"),
 610        SND_SOC_DAPM_INPUT("SDIN1-R"),
 611        SND_SOC_DAPM_INPUT("SDIN2-L"),
 612        SND_SOC_DAPM_INPUT("SDIN2-R"),
 613        SND_SOC_DAPM_INPUT("SDIN3-L"),
 614        SND_SOC_DAPM_INPUT("SDIN3-R"),
 615        SND_SOC_DAPM_INPUT("SDIN4-L"),
 616        SND_SOC_DAPM_INPUT("SDIN4-R"),
 617
 618        SND_SOC_DAPM_OUTPUT("PWM1"),
 619        SND_SOC_DAPM_OUTPUT("PWM2"),
 620        SND_SOC_DAPM_OUTPUT("PWM3"),
 621        SND_SOC_DAPM_OUTPUT("PWM4"),
 622        SND_SOC_DAPM_OUTPUT("PWM5"),
 623        SND_SOC_DAPM_OUTPUT("PWM6"),
 624
 625        SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0,
 626                         &tas5086_dapm_input_mux_controls[0]),
 627        SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0,
 628                         &tas5086_dapm_input_mux_controls[1]),
 629        SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0,
 630                         &tas5086_dapm_input_mux_controls[2]),
 631        SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0,
 632                         &tas5086_dapm_input_mux_controls[3]),
 633        SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0,
 634                         &tas5086_dapm_input_mux_controls[4]),
 635        SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0,
 636                         &tas5086_dapm_input_mux_controls[5]),
 637
 638        SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0,
 639                         &tas5086_dapm_output_mux_controls[0]),
 640        SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0,
 641                         &tas5086_dapm_output_mux_controls[1]),
 642        SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0,
 643                         &tas5086_dapm_output_mux_controls[2]),
 644        SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0,
 645                         &tas5086_dapm_output_mux_controls[3]),
 646        SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0,
 647                         &tas5086_dapm_output_mux_controls[4]),
 648        SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0,
 649                         &tas5086_dapm_output_mux_controls[5]),
 650};
 651
 652static const struct snd_soc_dapm_route tas5086_dapm_routes[] = {
 653        /* SDIN inputs -> channel muxes */
 654        { "Channel 1 Mux", "SDIN1-L", "SDIN1-L" },
 655        { "Channel 1 Mux", "SDIN1-R", "SDIN1-R" },
 656        { "Channel 1 Mux", "SDIN2-L", "SDIN2-L" },
 657        { "Channel 1 Mux", "SDIN2-R", "SDIN2-R" },
 658        { "Channel 1 Mux", "SDIN3-L", "SDIN3-L" },
 659        { "Channel 1 Mux", "SDIN3-R", "SDIN3-R" },
 660
 661        { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
 662        { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
 663        { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
 664        { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
 665        { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
 666        { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
 667
 668        { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
 669        { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
 670        { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
 671        { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
 672        { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
 673        { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
 674
 675        { "Channel 3 Mux", "SDIN1-L", "SDIN1-L" },
 676        { "Channel 3 Mux", "SDIN1-R", "SDIN1-R" },
 677        { "Channel 3 Mux", "SDIN2-L", "SDIN2-L" },
 678        { "Channel 3 Mux", "SDIN2-R", "SDIN2-R" },
 679        { "Channel 3 Mux", "SDIN3-L", "SDIN3-L" },
 680        { "Channel 3 Mux", "SDIN3-R", "SDIN3-R" },
 681
 682        { "Channel 4 Mux", "SDIN1-L", "SDIN1-L" },
 683        { "Channel 4 Mux", "SDIN1-R", "SDIN1-R" },
 684        { "Channel 4 Mux", "SDIN2-L", "SDIN2-L" },
 685        { "Channel 4 Mux", "SDIN2-R", "SDIN2-R" },
 686        { "Channel 4 Mux", "SDIN3-L", "SDIN3-L" },
 687        { "Channel 4 Mux", "SDIN3-R", "SDIN3-R" },
 688
 689        { "Channel 5 Mux", "SDIN1-L", "SDIN1-L" },
 690        { "Channel 5 Mux", "SDIN1-R", "SDIN1-R" },
 691        { "Channel 5 Mux", "SDIN2-L", "SDIN2-L" },
 692        { "Channel 5 Mux", "SDIN2-R", "SDIN2-R" },
 693        { "Channel 5 Mux", "SDIN3-L", "SDIN3-L" },
 694        { "Channel 5 Mux", "SDIN3-R", "SDIN3-R" },
 695
 696        { "Channel 6 Mux", "SDIN1-L", "SDIN1-L" },
 697        { "Channel 6 Mux", "SDIN1-R", "SDIN1-R" },
 698        { "Channel 6 Mux", "SDIN2-L", "SDIN2-L" },
 699        { "Channel 6 Mux", "SDIN2-R", "SDIN2-R" },
 700        { "Channel 6 Mux", "SDIN3-L", "SDIN3-L" },
 701        { "Channel 6 Mux", "SDIN3-R", "SDIN3-R" },
 702
 703        /* Channel muxes -> PWM muxes */
 704        { "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 705        { "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 706        { "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 707        { "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 708        { "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 709        { "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 710
 711        { "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 712        { "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 713        { "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 714        { "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 715        { "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 716        { "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 717
 718        { "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 719        { "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 720        { "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 721        { "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 722        { "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 723        { "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 724
 725        { "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 726        { "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 727        { "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 728        { "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 729        { "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 730        { "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 731
 732        { "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 733        { "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 734        { "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 735        { "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 736        { "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 737        { "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 738
 739        { "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 740        { "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 741        { "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 742        { "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 743        { "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 744        { "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 745
 746        /* The PWM muxes are directly connected to the PWM outputs */
 747        { "PWM1", NULL, "PWM1 Mux" },
 748        { "PWM2", NULL, "PWM2 Mux" },
 749        { "PWM3", NULL, "PWM3 Mux" },
 750        { "PWM4", NULL, "PWM4 Mux" },
 751        { "PWM5", NULL, "PWM5 Mux" },
 752        { "PWM6", NULL, "PWM6 Mux" },
 753
 754};
 755
 756static const struct snd_soc_dai_ops tas5086_dai_ops = {
 757        .hw_params      = tas5086_hw_params,
 758        .set_sysclk     = tas5086_set_dai_sysclk,
 759        .set_fmt        = tas5086_set_dai_fmt,
 760        .mute_stream    = tas5086_mute_stream,
 761};
 762
 763static struct snd_soc_dai_driver tas5086_dai = {
 764        .name = "tas5086-hifi",
 765        .playback = {
 766                .stream_name    = "Playback",
 767                .channels_min   = 2,
 768                .channels_max   = 6,
 769                .rates          = TAS5086_PCM_RATES,
 770                .formats        = TAS5086_PCM_FORMATS,
 771        },
 772        .ops = &tas5086_dai_ops,
 773};
 774
 775#ifdef CONFIG_PM
 776static int tas5086_soc_suspend(struct snd_soc_component *component)
 777{
 778        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 779        int ret;
 780
 781        /* Shut down all channels */
 782        ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60);
 783        if (ret < 0)
 784                return ret;
 785
 786        regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
 787
 788        return 0;
 789}
 790
 791static int tas5086_soc_resume(struct snd_soc_component *component)
 792{
 793        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 794        int ret;
 795
 796        ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
 797        if (ret < 0)
 798                return ret;
 799
 800        tas5086_reset(priv);
 801        regcache_mark_dirty(priv->regmap);
 802
 803        ret = tas5086_init(component->dev, priv);
 804        if (ret < 0)
 805                return ret;
 806
 807        ret = regcache_sync(priv->regmap);
 808        if (ret < 0)
 809                return ret;
 810
 811        return 0;
 812}
 813#else
 814#define tas5086_soc_suspend     NULL
 815#define tas5086_soc_resume      NULL
 816#endif /* CONFIG_PM */
 817
 818#ifdef CONFIG_OF
 819static const struct of_device_id tas5086_dt_ids[] = {
 820        { .compatible = "ti,tas5086", },
 821        { }
 822};
 823MODULE_DEVICE_TABLE(of, tas5086_dt_ids);
 824#endif
 825
 826static int tas5086_probe(struct snd_soc_component *component)
 827{
 828        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 829        int i, ret;
 830
 831        ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
 832        if (ret < 0) {
 833                dev_err(component->dev, "Failed to enable regulators: %d\n", ret);
 834                return ret;
 835        }
 836
 837        priv->pwm_start_mid_z = 0;
 838        priv->charge_period = 1300000; /* hardware default is 1300 ms */
 839
 840        if (of_match_device(of_match_ptr(tas5086_dt_ids), component->dev)) {
 841                struct device_node *of_node = component->dev->of_node;
 842
 843                of_property_read_u32(of_node, "ti,charge-period",
 844                                     &priv->charge_period);
 845
 846                for (i = 0; i < 6; i++) {
 847                        char name[25];
 848
 849                        snprintf(name, sizeof(name),
 850                                 "ti,mid-z-channel-%d", i + 1);
 851
 852                        if (of_get_property(of_node, name, NULL) != NULL)
 853                                priv->pwm_start_mid_z |= 1 << i;
 854                }
 855        }
 856
 857        tas5086_reset(priv);
 858        ret = tas5086_init(component->dev, priv);
 859        if (ret < 0)
 860                goto exit_disable_regulators;
 861
 862        /* set master volume to 0 dB */
 863        ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30);
 864        if (ret < 0)
 865                goto exit_disable_regulators;
 866
 867        return 0;
 868
 869exit_disable_regulators:
 870        regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
 871
 872        return ret;
 873}
 874
 875static void tas5086_remove(struct snd_soc_component *component)
 876{
 877        struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 878
 879        if (gpio_is_valid(priv->gpio_nreset))
 880                /* Set codec to the reset state */
 881                gpio_set_value(priv->gpio_nreset, 0);
 882
 883        regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
 884};
 885
 886static const struct snd_soc_component_driver soc_component_dev_tas5086 = {
 887        .probe                  = tas5086_probe,
 888        .remove                 = tas5086_remove,
 889        .suspend                = tas5086_soc_suspend,
 890        .resume                 = tas5086_soc_resume,
 891        .controls               = tas5086_controls,
 892        .num_controls           = ARRAY_SIZE(tas5086_controls),
 893        .dapm_widgets           = tas5086_dapm_widgets,
 894        .num_dapm_widgets       = ARRAY_SIZE(tas5086_dapm_widgets),
 895        .dapm_routes            = tas5086_dapm_routes,
 896        .num_dapm_routes        = ARRAY_SIZE(tas5086_dapm_routes),
 897        .idle_bias_on           = 1,
 898        .use_pmdown_time        = 1,
 899        .endianness             = 1,
 900        .non_legacy_dai_naming  = 1,
 901};
 902
 903static const struct i2c_device_id tas5086_i2c_id[] = {
 904        { "tas5086", 0 },
 905        { }
 906};
 907MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id);
 908
 909static const struct regmap_config tas5086_regmap = {
 910        .reg_bits               = 8,
 911        .val_bits               = 32,
 912        .max_register           = TAS5086_MAX_REGISTER,
 913        .reg_defaults           = tas5086_reg_defaults,
 914        .num_reg_defaults       = ARRAY_SIZE(tas5086_reg_defaults),
 915        .cache_type             = REGCACHE_RBTREE,
 916        .volatile_reg           = tas5086_volatile_reg,
 917        .writeable_reg          = tas5086_writeable_reg,
 918        .readable_reg           = tas5086_accessible_reg,
 919        .reg_read               = tas5086_reg_read,
 920        .reg_write              = tas5086_reg_write,
 921};
 922
 923static int tas5086_i2c_probe(struct i2c_client *i2c,
 924                             const struct i2c_device_id *id)
 925{
 926        struct tas5086_private *priv;
 927        struct device *dev = &i2c->dev;
 928        int gpio_nreset = -EINVAL;
 929        int i, ret;
 930
 931        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 932        if (!priv)
 933                return -ENOMEM;
 934
 935        for (i = 0; i < ARRAY_SIZE(supply_names); i++)
 936                priv->supplies[i].supply = supply_names[i];
 937
 938        ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
 939                                      priv->supplies);
 940        if (ret < 0) {
 941                dev_err(dev, "Failed to get regulators: %d\n", ret);
 942                return ret;
 943        }
 944
 945        priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap);
 946        if (IS_ERR(priv->regmap)) {
 947                ret = PTR_ERR(priv->regmap);
 948                dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
 949                return ret;
 950        }
 951
 952        i2c_set_clientdata(i2c, priv);
 953
 954        if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) {
 955                struct device_node *of_node = dev->of_node;
 956                gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0);
 957        }
 958
 959        if (gpio_is_valid(gpio_nreset))
 960                if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset"))
 961                        gpio_nreset = -EINVAL;
 962
 963        priv->gpio_nreset = gpio_nreset;
 964
 965        ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
 966        if (ret < 0) {
 967                dev_err(dev, "Failed to enable regulators: %d\n", ret);
 968                return ret;
 969        }
 970
 971        tas5086_reset(priv);
 972
 973        /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */
 974        ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i);
 975        if (ret == 0 && i != 0x3) {
 976                dev_err(dev,
 977                        "Failed to identify TAS5086 codec (got %02x)\n", i);
 978                ret = -ENODEV;
 979        }
 980
 981        /*
 982         * The chip has been identified, so we can turn off the power
 983         * again until the dai link is set up.
 984         */
 985        regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
 986
 987        if (ret == 0)
 988                ret = devm_snd_soc_register_component(&i2c->dev,
 989                                             &soc_component_dev_tas5086,
 990                                             &tas5086_dai, 1);
 991
 992        return ret;
 993}
 994
 995static int tas5086_i2c_remove(struct i2c_client *i2c)
 996{
 997        return 0;
 998}
 999
1000static struct i2c_driver tas5086_i2c_driver = {
1001        .driver = {
1002                .name   = "tas5086",
1003                .of_match_table = of_match_ptr(tas5086_dt_ids),
1004        },
1005        .id_table       = tas5086_i2c_id,
1006        .probe          = tas5086_i2c_probe,
1007        .remove         = tas5086_i2c_remove,
1008};
1009
1010module_i2c_driver(tas5086_i2c_driver);
1011
1012MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>");
1013MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver");
1014MODULE_LICENSE("GPL");
1015