linux/drivers/ide/ide-pm.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2#include <linux/kernel.h>
   3#include <linux/gfp.h>
   4#include <linux/ide.h>
   5
   6int generic_ide_suspend(struct device *dev, pm_message_t mesg)
   7{
   8        ide_drive_t *drive = to_ide_device(dev);
   9        ide_drive_t *pair = ide_get_pair_dev(drive);
  10        ide_hwif_t *hwif = drive->hwif;
  11        struct request *rq;
  12        struct ide_pm_state rqpm;
  13        int ret;
  14
  15        if (ide_port_acpi(hwif)) {
  16                /* call ACPI _GTM only once */
  17                if ((drive->dn & 1) == 0 || pair == NULL)
  18                        ide_acpi_get_timing(hwif);
  19        }
  20
  21        memset(&rqpm, 0, sizeof(rqpm));
  22        rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
  23        ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
  24        rq->special = &rqpm;
  25        rqpm.pm_step = IDE_PM_START_SUSPEND;
  26        if (mesg.event == PM_EVENT_PRETHAW)
  27                mesg.event = PM_EVENT_FREEZE;
  28        rqpm.pm_state = mesg.event;
  29
  30        blk_execute_rq(drive->queue, NULL, rq, 0);
  31        ret = scsi_req(rq)->result ? -EIO : 0;
  32        blk_put_request(rq);
  33
  34        if (ret == 0 && ide_port_acpi(hwif)) {
  35                /* call ACPI _PS3 only after both devices are suspended */
  36                if ((drive->dn & 1) || pair == NULL)
  37                        ide_acpi_set_state(hwif, 0);
  38        }
  39
  40        return ret;
  41}
  42
  43static void ide_end_sync_rq(struct request *rq, blk_status_t error)
  44{
  45        complete(rq->end_io_data);
  46}
  47
  48static int ide_pm_execute_rq(struct request *rq)
  49{
  50        struct request_queue *q = rq->q;
  51        DECLARE_COMPLETION_ONSTACK(wait);
  52
  53        rq->end_io_data = &wait;
  54        rq->end_io = ide_end_sync_rq;
  55
  56        spin_lock_irq(q->queue_lock);
  57        if (unlikely(blk_queue_dying(q))) {
  58                rq->rq_flags |= RQF_QUIET;
  59                scsi_req(rq)->result = -ENXIO;
  60                __blk_end_request_all(rq, BLK_STS_OK);
  61                spin_unlock_irq(q->queue_lock);
  62                return -ENXIO;
  63        }
  64        __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT);
  65        __blk_run_queue_uncond(q);
  66        spin_unlock_irq(q->queue_lock);
  67
  68        wait_for_completion_io(&wait);
  69
  70        return scsi_req(rq)->result ? -EIO : 0;
  71}
  72
  73int generic_ide_resume(struct device *dev)
  74{
  75        ide_drive_t *drive = to_ide_device(dev);
  76        ide_drive_t *pair = ide_get_pair_dev(drive);
  77        ide_hwif_t *hwif = drive->hwif;
  78        struct request *rq;
  79        struct ide_pm_state rqpm;
  80        int err;
  81
  82        if (ide_port_acpi(hwif)) {
  83                /* call ACPI _PS0 / _STM only once */
  84                if ((drive->dn & 1) == 0 || pair == NULL) {
  85                        ide_acpi_set_state(hwif, 1);
  86                        ide_acpi_push_timing(hwif);
  87                }
  88
  89                ide_acpi_exec_tfs(drive);
  90        }
  91
  92        memset(&rqpm, 0, sizeof(rqpm));
  93        rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PREEMPT);
  94        ide_req(rq)->type = ATA_PRIV_PM_RESUME;
  95        rq->special = &rqpm;
  96        rqpm.pm_step = IDE_PM_START_RESUME;
  97        rqpm.pm_state = PM_EVENT_ON;
  98
  99        err = ide_pm_execute_rq(rq);
 100        blk_put_request(rq);
 101
 102        if (err == 0 && dev->driver) {
 103                struct ide_driver *drv = to_ide_driver(dev->driver);
 104
 105                if (drv->resume)
 106                        drv->resume(drive);
 107        }
 108
 109        return err;
 110}
 111
 112void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
 113{
 114        struct ide_pm_state *pm = rq->special;
 115
 116#ifdef DEBUG_PM
 117        printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
 118                drive->name, pm->pm_step);
 119#endif
 120        if (drive->media != ide_disk)
 121                return;
 122
 123        switch (pm->pm_step) {
 124        case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
 125                if (pm->pm_state == PM_EVENT_FREEZE)
 126                        pm->pm_step = IDE_PM_COMPLETED;
 127                else
 128                        pm->pm_step = IDE_PM_STANDBY;
 129                break;
 130        case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
 131                pm->pm_step = IDE_PM_COMPLETED;
 132                break;
 133        case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
 134                pm->pm_step = IDE_PM_IDLE;
 135                break;
 136        case IDE_PM_IDLE:               /* Resume step 2 (idle)*/
 137                pm->pm_step = IDE_PM_RESTORE_DMA;
 138                break;
 139        }
 140}
 141
 142ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 143{
 144        struct ide_pm_state *pm = rq->special;
 145        struct ide_cmd cmd = { };
 146
 147        switch (pm->pm_step) {
 148        case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
 149                if (drive->media != ide_disk)
 150                        break;
 151                /* Not supported? Switch to next step now. */
 152                if (ata_id_flush_enabled(drive->id) == 0 ||
 153                    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
 154                        ide_complete_power_step(drive, rq);
 155                        return ide_stopped;
 156                }
 157                if (ata_id_flush_ext_enabled(drive->id))
 158                        cmd.tf.command = ATA_CMD_FLUSH_EXT;
 159                else
 160                        cmd.tf.command = ATA_CMD_FLUSH;
 161                goto out_do_tf;
 162        case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
 163                cmd.tf.command = ATA_CMD_STANDBYNOW1;
 164                goto out_do_tf;
 165        case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
 166                ide_set_max_pio(drive);
 167                /*
 168                 * skip IDE_PM_IDLE for ATAPI devices
 169                 */
 170                if (drive->media != ide_disk)
 171                        pm->pm_step = IDE_PM_RESTORE_DMA;
 172                else
 173                        ide_complete_power_step(drive, rq);
 174                return ide_stopped;
 175        case IDE_PM_IDLE:               /* Resume step 2 (idle) */
 176                cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
 177                goto out_do_tf;
 178        case IDE_PM_RESTORE_DMA:        /* Resume step 3 (restore DMA) */
 179                /*
 180                 * Right now, all we do is call ide_set_dma(drive),
 181                 * we could be smarter and check for current xfer_speed
 182                 * in struct drive etc...
 183                 */
 184                if (drive->hwif->dma_ops == NULL)
 185                        break;
 186                /*
 187                 * TODO: respect IDE_DFLAG_USING_DMA
 188                 */
 189                ide_set_dma(drive);
 190                break;
 191        }
 192
 193        pm->pm_step = IDE_PM_COMPLETED;
 194
 195        return ide_stopped;
 196
 197out_do_tf:
 198        cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
 199        cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
 200        cmd.protocol = ATA_PROT_NODATA;
 201
 202        return do_rw_taskfile(drive, &cmd);
 203}
 204
 205/**
 206 *      ide_complete_pm_rq - end the current Power Management request
 207 *      @drive: target drive
 208 *      @rq: request
 209 *
 210 *      This function cleans up the current PM request and stops the queue
 211 *      if necessary.
 212 */
 213void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
 214{
 215        struct request_queue *q = drive->queue;
 216        struct ide_pm_state *pm = rq->special;
 217        unsigned long flags;
 218
 219        ide_complete_power_step(drive, rq);
 220        if (pm->pm_step != IDE_PM_COMPLETED)
 221                return;
 222
 223#ifdef DEBUG_PM
 224        printk("%s: completing PM request, %s\n", drive->name,
 225               (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
 226#endif
 227        spin_lock_irqsave(q->queue_lock, flags);
 228        if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
 229                blk_stop_queue(q);
 230        else
 231                drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
 232        spin_unlock_irqrestore(q->queue_lock, flags);
 233
 234        drive->hwif->rq = NULL;
 235
 236        if (blk_end_request(rq, BLK_STS_OK, 0))
 237                BUG();
 238}
 239
 240void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 241{
 242        struct ide_pm_state *pm = rq->special;
 243
 244        if (blk_rq_is_private(rq) &&
 245            ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
 246            pm->pm_step == IDE_PM_START_SUSPEND)
 247                /* Mark drive blocked when starting the suspend sequence. */
 248                drive->dev_flags |= IDE_DFLAG_BLOCKED;
 249        else if (blk_rq_is_private(rq) &&
 250                 ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
 251                 pm->pm_step == IDE_PM_START_RESUME) {
 252                /*
 253                 * The first thing we do on wakeup is to wait for BSY bit to
 254                 * go away (with a looong timeout) as a drive on this hwif may
 255                 * just be POSTing itself.
 256                 * We do that before even selecting as the "other" device on
 257                 * the bus may be broken enough to walk on our toes at this
 258                 * point.
 259                 */
 260                ide_hwif_t *hwif = drive->hwif;
 261                const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 262                struct request_queue *q = drive->queue;
 263                unsigned long flags;
 264                int rc;
 265#ifdef DEBUG_PM
 266                printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
 267#endif
 268                rc = ide_wait_not_busy(hwif, 35000);
 269                if (rc)
 270                        printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
 271                tp_ops->dev_select(drive);
 272                tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
 273                rc = ide_wait_not_busy(hwif, 100000);
 274                if (rc)
 275                        printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
 276
 277                spin_lock_irqsave(q->queue_lock, flags);
 278                blk_start_queue(q);
 279                spin_unlock_irqrestore(q->queue_lock, flags);
 280        }
 281}
 282