1/* 2 * Copyright(c) 2015, 2016 Intel Corporation. 3 * 4 * This file is provided under a dual BSD/GPLv2 license. When using or 5 * redistributing this file, you may do so under either license. 6 * 7 * GPL LICENSE SUMMARY 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * BSD LICENSE 19 * 20 * Redistribution and use in source and binary forms, with or without 21 * modification, are permitted provided that the following conditions 22 * are met: 23 * 24 * - Redistributions of source code must retain the above copyright 25 * notice, this list of conditions and the following disclaimer. 26 * - Redistributions in binary form must reproduce the above copyright 27 * notice, this list of conditions and the following disclaimer in 28 * the documentation and/or other materials provided with the 29 * distribution. 30 * - Neither the name of Intel Corporation nor the names of its 31 * contributors may be used to endorse or promote products derived 32 * from this software without specific prior written permission. 33 * 34 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 35 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 36 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 37 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 38 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 39 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 40 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 41 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 42 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 43 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 44 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 45 * 46 */ 47/* QSFP support common definitions, for hfi driver */ 48 49#define QSFP_DEV 0xA0 50#define QSFP_PWR_LAG_MSEC 2000 51#define QSFP_MODPRS_LAG_MSEC 20 52/* 128 byte pages, per SFF 8636 rev 2.4 */ 53#define QSFP_MAX_NUM_PAGES 5 54 55/* 56 * Below are masks for QSFP pins. Pins are the same for HFI0 and HFI1. 57 * _N means asserted low 58 */ 59#define QSFP_HFI0_I2CCLK BIT(0) 60#define QSFP_HFI0_I2CDAT BIT(1) 61#define QSFP_HFI0_RESET_N BIT(2) 62#define QSFP_HFI0_INT_N BIT(3) 63#define QSFP_HFI0_MODPRST_N BIT(4) 64 65/* QSFP is paged at 256 bytes */ 66#define QSFP_PAGESIZE 256 67/* Reads/writes cannot cross 128 byte boundaries */ 68#define QSFP_RW_BOUNDARY 128 69 70/* number of bytes in i2c offset for QSFP devices */ 71#define __QSFP_OFFSET_SIZE 1 /* num address bytes */ 72#define QSFP_OFFSET_SIZE (__QSFP_OFFSET_SIZE << 8) /* shifted value */ 73 74/* Defined fields that Intel requires of qualified cables */ 75/* Byte 0 is Identifier, not checked */ 76/* Byte 1 is reserved "status MSB" */ 77#define QSFP_MONITOR_VAL_START 22 78#define QSFP_MONITOR_VAL_END 81 79#define QSFP_MONITOR_RANGE (QSFP_MONITOR_VAL_END - QSFP_MONITOR_VAL_START + 1) 80#define QSFP_TX_CTRL_BYTE_OFFS 86 81#define QSFP_PWR_CTRL_BYTE_OFFS 93 82#define QSFP_CDR_CTRL_BYTE_OFFS 98 83 84#define QSFP_PAGE_SELECT_BYTE_OFFS 127 85/* Byte 128 is Identifier: must be 0x0c for QSFP, or 0x0d for QSFP+ */ 86#define QSFP_MOD_ID_OFFS 128 87/* 88 * Byte 129 is "Extended Identifier". 89 * For bits [7:6]: 0:1.5W, 1:2.0W, 2:2.5W, 3:3.5W 90 * For bits [1:0]: 0:Unused, 1:4W, 2:4.5W, 3:5W 91 */ 92#define QSFP_MOD_PWR_OFFS 129 93/* Byte 130 is Connector type. Not Intel req'd */ 94/* Bytes 131..138 are Transceiver types, bit maps for various tech, none IB */ 95/* Byte 139 is encoding. code 0x01 is 8b10b. Not Intel req'd */ 96/* byte 140 is nominal bit-rate, in units of 100Mbits/sec */ 97#define QSFP_NOM_BIT_RATE_100_OFFS 140 98/* Byte 141 is Extended Rate Select. Not Intel req'd */ 99/* Bytes 142..145 are lengths for various fiber types. Not Intel req'd */ 100/* Byte 146 is length for Copper. Units of 1 meter */ 101#define QSFP_MOD_LEN_OFFS 146 102/* 103 * Byte 147 is Device technology. D0..3 not Intel req'd 104 * D4..7 select from 15 choices, translated by table: 105 */ 106#define QSFP_MOD_TECH_OFFS 147 107extern const char *const hfi1_qsfp_devtech[16]; 108/* Active Equalization includes fiber, copper full EQ, and copper near Eq */ 109#define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1) 110/* Active Equalization includes fiber, copper full EQ, and copper far Eq */ 111#define QSFP_IS_ACTIVE_FAR(tech) ((0x32FF >> ((tech) >> 4)) & 1) 112/* Attenuation should be valid for copper other than full/near Eq */ 113#define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1) 114/* Length is only valid if technology is "copper" */ 115#define QSFP_IS_CU(tech) ((0xED00 >> ((tech) >> 4)) & 1) 116#define QSFP_TECH_1490 9 117 118#define QSFP_OUI(oui) (((unsigned)oui[0] << 16) | ((unsigned)oui[1] << 8) | \ 119 oui[2]) 120#define QSFP_OUI_AMPHENOL 0x415048 121#define QSFP_OUI_FINISAR 0x009065 122#define QSFP_OUI_GORE 0x002177 123 124/* Bytes 148..163 are Vendor Name, Left-justified Blank-filled */ 125#define QSFP_VEND_OFFS 148 126#define QSFP_VEND_LEN 16 127/* Byte 164 is IB Extended transceiver codes Bits D0..3 are SDR,DDR,QDR,EDR */ 128#define QSFP_IBXCV_OFFS 164 129/* Bytes 165..167 are Vendor OUI number */ 130#define QSFP_VOUI_OFFS 165 131#define QSFP_VOUI_LEN 3 132/* Bytes 168..183 are Vendor Part Number, string */ 133#define QSFP_PN_OFFS 168 134#define QSFP_PN_LEN 16 135/* Bytes 184,185 are Vendor Rev. Left Justified, Blank-filled */ 136#define QSFP_REV_OFFS 184 137#define QSFP_REV_LEN 2 138/* 139 * Bytes 186,187 are Wavelength, if Optical. Not Intel req'd 140 * If copper, they are attenuation in dB: 141 * Byte 186 is at 2.5Gb/sec (SDR), Byte 187 at 5.0Gb/sec (DDR) 142 */ 143#define QSFP_ATTEN_OFFS 186 144#define QSFP_ATTEN_LEN 2 145/* 146 * Bytes 188,189 are Wavelength tolerance, if optical 147 * If copper, they are attenuation in dB: 148 * Byte 188 is at 12.5 Gb/s, Byte 189 at 25 Gb/s 149 */ 150#define QSFP_CU_ATTEN_7G_OFFS 188 151#define QSFP_CU_ATTEN_12G_OFFS 189 152/* Byte 190 is Max Case Temp. Not Intel req'd */ 153/* Byte 191 is LSB of sum of bytes 128..190. Not Intel req'd */ 154#define QSFP_CC_OFFS 191 155#define QSFP_EQ_INFO_OFFS 193 156#define QSFP_CDR_INFO_OFFS 194 157/* Bytes 196..211 are Serial Number, String */ 158#define QSFP_SN_OFFS 196 159#define QSFP_SN_LEN 16 160/* Bytes 212..219 are date-code YYMMDD (MM==1 for Jan) */ 161#define QSFP_DATE_OFFS 212 162#define QSFP_DATE_LEN 6 163/* Bytes 218,219 are optional lot-code, string */ 164#define QSFP_LOT_OFFS 218 165#define QSFP_LOT_LEN 2 166/* Bytes 220, 221 indicate monitoring options, Not Intel req'd */ 167/* Byte 222 indicates nominal bitrate in units of 250Mbits/sec */ 168#define QSFP_NOM_BIT_RATE_250_OFFS 222 169/* Byte 223 is LSB of sum of bytes 192..222 */ 170#define QSFP_CC_EXT_OFFS 223 171 172/* 173 * Interrupt flag masks 174 */ 175#define QSFP_DATA_NOT_READY 0x01 176 177#define QSFP_HIGH_TEMP_ALARM 0x80 178#define QSFP_LOW_TEMP_ALARM 0x40 179#define QSFP_HIGH_TEMP_WARNING 0x20 180#define QSFP_LOW_TEMP_WARNING 0x10 181 182#define QSFP_HIGH_VCC_ALARM 0x80 183#define QSFP_LOW_VCC_ALARM 0x40 184#define QSFP_HIGH_VCC_WARNING 0x20 185#define QSFP_LOW_VCC_WARNING 0x10 186 187#define QSFP_HIGH_POWER_ALARM 0x88 188#define QSFP_LOW_POWER_ALARM 0x44 189#define QSFP_HIGH_POWER_WARNING 0x22 190#define QSFP_LOW_POWER_WARNING 0x11 191 192#define QSFP_HIGH_BIAS_ALARM 0x88 193#define QSFP_LOW_BIAS_ALARM 0x44 194#define QSFP_HIGH_BIAS_WARNING 0x22 195#define QSFP_LOW_BIAS_WARNING 0x11 196 197#define QSFP_ATTEN_SDR(attenarray) (attenarray[0]) 198#define QSFP_ATTEN_DDR(attenarray) (attenarray[1]) 199 200/* 201 * struct qsfp_data encapsulates state of QSFP device for one port. 202 * it will be part of port-specific data if a board supports QSFP. 203 * 204 * Since multiple board-types use QSFP, and their pport_data structs 205 * differ (in the chip-specific section), we need a pointer to its head. 206 * 207 * Avoiding premature optimization, we will have one work_struct per port, 208 * and let the qsfp_lock arbitrate access to common resources. 209 * 210 */ 211struct qsfp_data { 212 /* Helps to find our way */ 213 struct hfi1_pportdata *ppd; 214 struct work_struct qsfp_work; 215 u8 cache[QSFP_MAX_NUM_PAGES * 128]; 216 /* protect qsfp data */ 217 spinlock_t qsfp_lock; 218 u8 check_interrupt_flags; 219 u8 reset_needed; 220 u8 limiting_active; 221 u8 cache_valid; 222 u8 cache_refresh_required; 223}; 224 225int refresh_qsfp_cache(struct hfi1_pportdata *ppd, 226 struct qsfp_data *cp); 227int get_qsfp_power_class(u8 power_byte); 228int qsfp_mod_present(struct hfi1_pportdata *ppd); 229int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, 230 u32 len, u8 *data); 231 232int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, 233 int offset, void *bp, int len); 234int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, 235 int offset, void *bp, int len); 236int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, 237 int len); 238int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, 239 int len); 240int one_qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, 241 int len); 242int one_qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, 243 int len); 244struct hfi1_asic_data; 245int set_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad); 246void clean_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad); 247