1/* 2 * Linux Security Module interfaces 3 * 4 * Copyright (C) 2001 WireX Communications, Inc <chris@wirex.com> 5 * Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com> 6 * Copyright (C) 2001 Networks Associates Technology, Inc <ssmalley@nai.com> 7 * Copyright (C) 2001 James Morris <jmorris@intercode.com.au> 8 * Copyright (C) 2001 Silicon Graphics, Inc. (Trust Technology Group) 9 * Copyright (C) 2015 Intel Corporation. 10 * Copyright (C) 2015 Casey Schaufler <casey@schaufler-ca.com> 11 * Copyright (C) 2016 Mellanox Techonologies 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License as published by 15 * the Free Software Foundation; either version 2 of the License, or 16 * (at your option) any later version. 17 * 18 * Due to this file being licensed under the GPL there is controversy over 19 * whether this permits you to write a module that #includes this file 20 * without placing your module under the GPL. Please consult a lawyer for 21 * advice before doing this. 22 * 23 */ 24 25#ifndef __LINUX_LSM_HOOKS_H 26#define __LINUX_LSM_HOOKS_H 27 28#include <linux/security.h> 29#include <linux/init.h> 30#include <linux/rculist.h> 31 32/** 33 * union security_list_options - Linux Security Module hook function list 34 * 35 * Security hooks for program execution operations. 36 * 37 * @bprm_set_creds: 38 * Save security information in the bprm->security field, typically based 39 * on information about the bprm->file, for later use by the apply_creds 40 * hook. This hook may also optionally check permissions (e.g. for 41 * transitions between security domains). 42 * This hook may be called multiple times during a single execve, e.g. for 43 * interpreters. The hook can tell whether it has already been called by 44 * checking to see if @bprm->security is non-NULL. If so, then the hook 45 * may decide either to retain the security information saved earlier or 46 * to replace it. The hook must set @bprm->secureexec to 1 if a "secure 47 * exec" has happened as a result of this hook call. The flag is used to 48 * indicate the need for a sanitized execution environment, and is also 49 * passed in the ELF auxiliary table on the initial stack to indicate 50 * whether libc should enable secure mode. 51 * @bprm contains the linux_binprm structure. 52 * Return 0 if the hook is successful and permission is granted. 53 * @bprm_check_security: 54 * This hook mediates the point when a search for a binary handler will 55 * begin. It allows a check the @bprm->security value which is set in the 56 * preceding set_creds call. The primary difference from set_creds is 57 * that the argv list and envp list are reliably available in @bprm. This 58 * hook may be called multiple times during a single execve; and in each 59 * pass set_creds is called first. 60 * @bprm contains the linux_binprm structure. 61 * Return 0 if the hook is successful and permission is granted. 62 * @bprm_committing_creds: 63 * Prepare to install the new security attributes of a process being 64 * transformed by an execve operation, based on the old credentials 65 * pointed to by @current->cred and the information set in @bprm->cred by 66 * the bprm_set_creds hook. @bprm points to the linux_binprm structure. 67 * This hook is a good place to perform state changes on the process such 68 * as closing open file descriptors to which access will no longer be 69 * granted when the attributes are changed. This is called immediately 70 * before commit_creds(). 71 * @bprm_committed_creds: 72 * Tidy up after the installation of the new security attributes of a 73 * process being transformed by an execve operation. The new credentials 74 * have, by this point, been set to @current->cred. @bprm points to the 75 * linux_binprm structure. This hook is a good place to perform state 76 * changes on the process such as clearing out non-inheritable signal 77 * state. This is called immediately after commit_creds(). 78 * 79 * Security hooks for filesystem operations. 80 * 81 * @sb_alloc_security: 82 * Allocate and attach a security structure to the sb->s_security field. 83 * The s_security field is initialized to NULL when the structure is 84 * allocated. 85 * @sb contains the super_block structure to be modified. 86 * Return 0 if operation was successful. 87 * @sb_free_security: 88 * Deallocate and clear the sb->s_security field. 89 * @sb contains the super_block structure to be modified. 90 * @sb_statfs: 91 * Check permission before obtaining filesystem statistics for the @mnt 92 * mountpoint. 93 * @dentry is a handle on the superblock for the filesystem. 94 * Return 0 if permission is granted. 95 * @sb_mount: 96 * Check permission before an object specified by @dev_name is mounted on 97 * the mount point named by @nd. For an ordinary mount, @dev_name 98 * identifies a device if the file system type requires a device. For a 99 * remount (@flags & MS_REMOUNT), @dev_name is irrelevant. For a 100 * loopback/bind mount (@flags & MS_BIND), @dev_name identifies the 101 * pathname of the object being mounted. 102 * @dev_name contains the name for object being mounted. 103 * @path contains the path for mount point object. 104 * @type contains the filesystem type. 105 * @flags contains the mount flags. 106 * @data contains the filesystem-specific data. 107 * Return 0 if permission is granted. 108 * @sb_copy_data: 109 * Allow mount option data to be copied prior to parsing by the filesystem, 110 * so that the security module can extract security-specific mount 111 * options cleanly (a filesystem may modify the data e.g. with strsep()). 112 * This also allows the original mount data to be stripped of security- 113 * specific options to avoid having to make filesystems aware of them. 114 * @type the type of filesystem being mounted. 115 * @orig the original mount data copied from userspace. 116 * @copy copied data which will be passed to the security module. 117 * Returns 0 if the copy was successful. 118 * @sb_remount: 119 * Extracts security system specific mount options and verifies no changes 120 * are being made to those options. 121 * @sb superblock being remounted 122 * @data contains the filesystem-specific data. 123 * Return 0 if permission is granted. 124 * @sb_umount: 125 * Check permission before the @mnt file system is unmounted. 126 * @mnt contains the mounted file system. 127 * @flags contains the unmount flags, e.g. MNT_FORCE. 128 * Return 0 if permission is granted. 129 * @sb_pivotroot: 130 * Check permission before pivoting the root filesystem. 131 * @old_path contains the path for the new location of the 132 * current root (put_old). 133 * @new_path contains the path for the new root (new_root). 134 * Return 0 if permission is granted. 135 * @sb_set_mnt_opts: 136 * Set the security relevant mount options used for a superblock 137 * @sb the superblock to set security mount options for 138 * @opts binary data structure containing all lsm mount data 139 * @sb_clone_mnt_opts: 140 * Copy all security options from a given superblock to another 141 * @oldsb old superblock which contain information to clone 142 * @newsb new superblock which needs filled in 143 * @sb_parse_opts_str: 144 * Parse a string of security data filling in the opts structure 145 * @options string containing all mount options known by the LSM 146 * @opts binary data structure usable by the LSM 147 * @dentry_init_security: 148 * Compute a context for a dentry as the inode is not yet available 149 * since NFSv4 has no label backed by an EA anyway. 150 * @dentry dentry to use in calculating the context. 151 * @mode mode used to determine resource type. 152 * @name name of the last path component used to create file 153 * @ctx pointer to place the pointer to the resulting context in. 154 * @ctxlen point to place the length of the resulting context. 155 * @dentry_create_files_as: 156 * Compute a context for a dentry as the inode is not yet available 157 * and set that context in passed in creds so that new files are 158 * created using that context. Context is calculated using the 159 * passed in creds and not the creds of the caller. 160 * @dentry dentry to use in calculating the context. 161 * @mode mode used to determine resource type. 162 * @name name of the last path component used to create file 163 * @old creds which should be used for context calculation 164 * @new creds to modify 165 * 166 * 167 * Security hooks for inode operations. 168 * 169 * @inode_alloc_security: 170 * Allocate and attach a security structure to @inode->i_security. The 171 * i_security field is initialized to NULL when the inode structure is 172 * allocated. 173 * @inode contains the inode structure. 174 * Return 0 if operation was successful. 175 * @inode_free_security: 176 * @inode contains the inode structure. 177 * Deallocate the inode security structure and set @inode->i_security to 178 * NULL. 179 * @inode_init_security: 180 * Obtain the security attribute name suffix and value to set on a newly 181 * created inode and set up the incore security field for the new inode. 182 * This hook is called by the fs code as part of the inode creation 183 * transaction and provides for atomic labeling of the inode, unlike 184 * the post_create/mkdir/... hooks called by the VFS. The hook function 185 * is expected to allocate the name and value via kmalloc, with the caller 186 * being responsible for calling kfree after using them. 187 * If the security module does not use security attributes or does 188 * not wish to put a security attribute on this particular inode, 189 * then it should return -EOPNOTSUPP to skip this processing. 190 * @inode contains the inode structure of the newly created inode. 191 * @dir contains the inode structure of the parent directory. 192 * @qstr contains the last path component of the new object 193 * @name will be set to the allocated name suffix (e.g. selinux). 194 * @value will be set to the allocated attribute value. 195 * @len will be set to the length of the value. 196 * Returns 0 if @name and @value have been successfully set, 197 * -EOPNOTSUPP if no security attribute is needed, or 198 * -ENOMEM on memory allocation failure. 199 * @inode_create: 200 * Check permission to create a regular file. 201 * @dir contains inode structure of the parent of the new file. 202 * @dentry contains the dentry structure for the file to be created. 203 * @mode contains the file mode of the file to be created. 204 * Return 0 if permission is granted. 205 * @inode_link: 206 * Check permission before creating a new hard link to a file. 207 * @old_dentry contains the dentry structure for an existing 208 * link to the file. 209 * @dir contains the inode structure of the parent directory 210 * of the new link. 211 * @new_dentry contains the dentry structure for the new link. 212 * Return 0 if permission is granted. 213 * @path_link: 214 * Check permission before creating a new hard link to a file. 215 * @old_dentry contains the dentry structure for an existing link 216 * to the file. 217 * @new_dir contains the path structure of the parent directory of 218 * the new link. 219 * @new_dentry contains the dentry structure for the new link. 220 * Return 0 if permission is granted. 221 * @inode_unlink: 222 * Check the permission to remove a hard link to a file. 223 * @dir contains the inode structure of parent directory of the file. 224 * @dentry contains the dentry structure for file to be unlinked. 225 * Return 0 if permission is granted. 226 * @path_unlink: 227 * Check the permission to remove a hard link to a file. 228 * @dir contains the path structure of parent directory of the file. 229 * @dentry contains the dentry structure for file to be unlinked. 230 * Return 0 if permission is granted. 231 * @inode_symlink: 232 * Check the permission to create a symbolic link to a file. 233 * @dir contains the inode structure of parent directory of 234 * the symbolic link. 235 * @dentry contains the dentry structure of the symbolic link. 236 * @old_name contains the pathname of file. 237 * Return 0 if permission is granted. 238 * @path_symlink: 239 * Check the permission to create a symbolic link to a file. 240 * @dir contains the path structure of parent directory of 241 * the symbolic link. 242 * @dentry contains the dentry structure of the symbolic link. 243 * @old_name contains the pathname of file. 244 * Return 0 if permission is granted. 245 * @inode_mkdir: 246 * Check permissions to create a new directory in the existing directory 247 * associated with inode structure @dir. 248 * @dir contains the inode structure of parent of the directory 249 * to be created. 250 * @dentry contains the dentry structure of new directory. 251 * @mode contains the mode of new directory. 252 * Return 0 if permission is granted. 253 * @path_mkdir: 254 * Check permissions to create a new directory in the existing directory 255 * associated with path structure @path. 256 * @dir contains the path structure of parent of the directory 257 * to be created. 258 * @dentry contains the dentry structure of new directory. 259 * @mode contains the mode of new directory. 260 * Return 0 if permission is granted. 261 * @inode_rmdir: 262 * Check the permission to remove a directory. 263 * @dir contains the inode structure of parent of the directory 264 * to be removed. 265 * @dentry contains the dentry structure of directory to be removed. 266 * Return 0 if permission is granted. 267 * @path_rmdir: 268 * Check the permission to remove a directory. 269 * @dir contains the path structure of parent of the directory to be 270 * removed. 271 * @dentry contains the dentry structure of directory to be removed. 272 * Return 0 if permission is granted. 273 * @inode_mknod: 274 * Check permissions when creating a special file (or a socket or a fifo 275 * file created via the mknod system call). Note that if mknod operation 276 * is being done for a regular file, then the create hook will be called 277 * and not this hook. 278 * @dir contains the inode structure of parent of the new file. 279 * @dentry contains the dentry structure of the new file. 280 * @mode contains the mode of the new file. 281 * @dev contains the device number. 282 * Return 0 if permission is granted. 283 * @path_mknod: 284 * Check permissions when creating a file. Note that this hook is called 285 * even if mknod operation is being done for a regular file. 286 * @dir contains the path structure of parent of the new file. 287 * @dentry contains the dentry structure of the new file. 288 * @mode contains the mode of the new file. 289 * @dev contains the undecoded device number. Use new_decode_dev() to get 290 * the decoded device number. 291 * Return 0 if permission is granted. 292 * @inode_rename: 293 * Check for permission to rename a file or directory. 294 * @old_dir contains the inode structure for parent of the old link. 295 * @old_dentry contains the dentry structure of the old link. 296 * @new_dir contains the inode structure for parent of the new link. 297 * @new_dentry contains the dentry structure of the new link. 298 * Return 0 if permission is granted. 299 * @path_rename: 300 * Check for permission to rename a file or directory. 301 * @old_dir contains the path structure for parent of the old link. 302 * @old_dentry contains the dentry structure of the old link. 303 * @new_dir contains the path structure for parent of the new link. 304 * @new_dentry contains the dentry structure of the new link. 305 * Return 0 if permission is granted. 306 * @path_chmod: 307 * Check for permission to change DAC's permission of a file or directory. 308 * @dentry contains the dentry structure. 309 * @mnt contains the vfsmnt structure. 310 * @mode contains DAC's mode. 311 * Return 0 if permission is granted. 312 * @path_chown: 313 * Check for permission to change owner/group of a file or directory. 314 * @path contains the path structure. 315 * @uid contains new owner's ID. 316 * @gid contains new group's ID. 317 * Return 0 if permission is granted. 318 * @path_chroot: 319 * Check for permission to change root directory. 320 * @path contains the path structure. 321 * Return 0 if permission is granted. 322 * @inode_readlink: 323 * Check the permission to read the symbolic link. 324 * @dentry contains the dentry structure for the file link. 325 * Return 0 if permission is granted. 326 * @inode_follow_link: 327 * Check permission to follow a symbolic link when looking up a pathname. 328 * @dentry contains the dentry structure for the link. 329 * @inode contains the inode, which itself is not stable in RCU-walk 330 * @rcu indicates whether we are in RCU-walk mode. 331 * Return 0 if permission is granted. 332 * @inode_permission: 333 * Check permission before accessing an inode. This hook is called by the 334 * existing Linux permission function, so a security module can use it to 335 * provide additional checking for existing Linux permission checks. 336 * Notice that this hook is called when a file is opened (as well as many 337 * other operations), whereas the file_security_ops permission hook is 338 * called when the actual read/write operations are performed. 339 * @inode contains the inode structure to check. 340 * @mask contains the permission mask. 341 * Return 0 if permission is granted. 342 * @inode_setattr: 343 * Check permission before setting file attributes. Note that the kernel 344 * call to notify_change is performed from several locations, whenever 345 * file attributes change (such as when a file is truncated, chown/chmod 346 * operations, transferring disk quotas, etc). 347 * @dentry contains the dentry structure for the file. 348 * @attr is the iattr structure containing the new file attributes. 349 * Return 0 if permission is granted. 350 * @path_truncate: 351 * Check permission before truncating a file. 352 * @path contains the path structure for the file. 353 * Return 0 if permission is granted. 354 * @inode_getattr: 355 * Check permission before obtaining file attributes. 356 * @path contains the path structure for the file. 357 * Return 0 if permission is granted. 358 * @inode_setxattr: 359 * Check permission before setting the extended attributes 360 * @value identified by @name for @dentry. 361 * Return 0 if permission is granted. 362 * @inode_post_setxattr: 363 * Update inode security field after successful setxattr operation. 364 * @value identified by @name for @dentry. 365 * @inode_getxattr: 366 * Check permission before obtaining the extended attributes 367 * identified by @name for @dentry. 368 * Return 0 if permission is granted. 369 * @inode_listxattr: 370 * Check permission before obtaining the list of extended attribute 371 * names for @dentry. 372 * Return 0 if permission is granted. 373 * @inode_removexattr: 374 * Check permission before removing the extended attribute 375 * identified by @name for @dentry. 376 * Return 0 if permission is granted. 377 * @inode_getsecurity: 378 * Retrieve a copy of the extended attribute representation of the 379 * security label associated with @name for @inode via @buffer. Note that 380 * @name is the remainder of the attribute name after the security prefix 381 * has been removed. @alloc is used to specify of the call should return a 382 * value via the buffer or just the value length Return size of buffer on 383 * success. 384 * @inode_setsecurity: 385 * Set the security label associated with @name for @inode from the 386 * extended attribute value @value. @size indicates the size of the 387 * @value in bytes. @flags may be XATTR_CREATE, XATTR_REPLACE, or 0. 388 * Note that @name is the remainder of the attribute name after the 389 * security. prefix has been removed. 390 * Return 0 on success. 391 * @inode_listsecurity: 392 * Copy the extended attribute names for the security labels 393 * associated with @inode into @buffer. The maximum size of @buffer 394 * is specified by @buffer_size. @buffer may be NULL to request 395 * the size of the buffer required. 396 * Returns number of bytes used/required on success. 397 * @inode_need_killpriv: 398 * Called when an inode has been changed. 399 * @dentry is the dentry being changed. 400 * Return <0 on error to abort the inode change operation. 401 * Return 0 if inode_killpriv does not need to be called. 402 * Return >0 if inode_killpriv does need to be called. 403 * @inode_killpriv: 404 * The setuid bit is being removed. Remove similar security labels. 405 * Called with the dentry->d_inode->i_mutex held. 406 * @dentry is the dentry being changed. 407 * Return 0 on success. If error is returned, then the operation 408 * causing setuid bit removal is failed. 409 * @inode_getsecid: 410 * Get the secid associated with the node. 411 * @inode contains a pointer to the inode. 412 * @secid contains a pointer to the location where result will be saved. 413 * In case of failure, @secid will be set to zero. 414 * @inode_copy_up: 415 * A file is about to be copied up from lower layer to upper layer of 416 * overlay filesystem. Security module can prepare a set of new creds 417 * and modify as need be and return new creds. Caller will switch to 418 * new creds temporarily to create new file and release newly allocated 419 * creds. 420 * @src indicates the union dentry of file that is being copied up. 421 * @new pointer to pointer to return newly allocated creds. 422 * Returns 0 on success or a negative error code on error. 423 * @inode_copy_up_xattr: 424 * Filter the xattrs being copied up when a unioned file is copied 425 * up from a lower layer to the union/overlay layer. 426 * @name indicates the name of the xattr. 427 * Returns 0 to accept the xattr, 1 to discard the xattr, -EOPNOTSUPP if 428 * security module does not know about attribute or a negative error code 429 * to abort the copy up. Note that the caller is responsible for reading 430 * and writing the xattrs as this hook is merely a filter. 431 * 432 * Security hooks for file operations 433 * 434 * @file_permission: 435 * Check file permissions before accessing an open file. This hook is 436 * called by various operations that read or write files. A security 437 * module can use this hook to perform additional checking on these 438 * operations, e.g. to revalidate permissions on use to support privilege 439 * bracketing or policy changes. Notice that this hook is used when the 440 * actual read/write operations are performed, whereas the 441 * inode_security_ops hook is called when a file is opened (as well as 442 * many other operations). 443 * Caveat: Although this hook can be used to revalidate permissions for 444 * various system call operations that read or write files, it does not 445 * address the revalidation of permissions for memory-mapped files. 446 * Security modules must handle this separately if they need such 447 * revalidation. 448 * @file contains the file structure being accessed. 449 * @mask contains the requested permissions. 450 * Return 0 if permission is granted. 451 * @file_alloc_security: 452 * Allocate and attach a security structure to the file->f_security field. 453 * The security field is initialized to NULL when the structure is first 454 * created. 455 * @file contains the file structure to secure. 456 * Return 0 if the hook is successful and permission is granted. 457 * @file_free_security: 458 * Deallocate and free any security structures stored in file->f_security. 459 * @file contains the file structure being modified. 460 * @file_ioctl: 461 * @file contains the file structure. 462 * @cmd contains the operation to perform. 463 * @arg contains the operational arguments. 464 * Check permission for an ioctl operation on @file. Note that @arg 465 * sometimes represents a user space pointer; in other cases, it may be a 466 * simple integer value. When @arg represents a user space pointer, it 467 * should never be used by the security module. 468 * Return 0 if permission is granted. 469 * @mmap_addr : 470 * Check permissions for a mmap operation at @addr. 471 * @addr contains virtual address that will be used for the operation. 472 * Return 0 if permission is granted. 473 * @mmap_file : 474 * Check permissions for a mmap operation. The @file may be NULL, e.g. 475 * if mapping anonymous memory. 476 * @file contains the file structure for file to map (may be NULL). 477 * @reqprot contains the protection requested by the application. 478 * @prot contains the protection that will be applied by the kernel. 479 * @flags contains the operational flags. 480 * Return 0 if permission is granted. 481 * @file_mprotect: 482 * Check permissions before changing memory access permissions. 483 * @vma contains the memory region to modify. 484 * @reqprot contains the protection requested by the application. 485 * @prot contains the protection that will be applied by the kernel. 486 * Return 0 if permission is granted. 487 * @file_lock: 488 * Check permission before performing file locking operations. 489 * Note: this hook mediates both flock and fcntl style locks. 490 * @file contains the file structure. 491 * @cmd contains the posix-translated lock operation to perform 492 * (e.g. F_RDLCK, F_WRLCK). 493 * Return 0 if permission is granted. 494 * @file_fcntl: 495 * Check permission before allowing the file operation specified by @cmd 496 * from being performed on the file @file. Note that @arg sometimes 497 * represents a user space pointer; in other cases, it may be a simple 498 * integer value. When @arg represents a user space pointer, it should 499 * never be used by the security module. 500 * @file contains the file structure. 501 * @cmd contains the operation to be performed. 502 * @arg contains the operational arguments. 503 * Return 0 if permission is granted. 504 * @file_set_fowner: 505 * Save owner security information (typically from current->security) in 506 * file->f_security for later use by the send_sigiotask hook. 507 * @file contains the file structure to update. 508 * Return 0 on success. 509 * @file_send_sigiotask: 510 * Check permission for the file owner @fown to send SIGIO or SIGURG to the 511 * process @tsk. Note that this hook is sometimes called from interrupt. 512 * Note that the fown_struct, @fown, is never outside the context of a 513 * struct file, so the file structure (and associated security information) 514 * can always be obtained: container_of(fown, struct file, f_owner) 515 * @tsk contains the structure of task receiving signal. 516 * @fown contains the file owner information. 517 * @sig is the signal that will be sent. When 0, kernel sends SIGIO. 518 * Return 0 if permission is granted. 519 * @file_receive: 520 * This hook allows security modules to control the ability of a process 521 * to receive an open file descriptor via socket IPC. 522 * @file contains the file structure being received. 523 * Return 0 if permission is granted. 524 * @file_open: 525 * Save open-time permission checking state for later use upon 526 * file_permission, and recheck access if anything has changed 527 * since inode_permission. 528 * 529 * Security hooks for task operations. 530 * 531 * @task_alloc: 532 * @task task being allocated. 533 * @clone_flags contains the flags indicating what should be shared. 534 * Handle allocation of task-related resources. 535 * Returns a zero on success, negative values on failure. 536 * @task_free: 537 * @task task about to be freed. 538 * Handle release of task-related resources. (Note that this can be called 539 * from interrupt context.) 540 * @cred_alloc_blank: 541 * @cred points to the credentials. 542 * @gfp indicates the atomicity of any memory allocations. 543 * Only allocate sufficient memory and attach to @cred such that 544 * cred_transfer() will not get ENOMEM. 545 * @cred_free: 546 * @cred points to the credentials. 547 * Deallocate and clear the cred->security field in a set of credentials. 548 * @cred_prepare: 549 * @new points to the new credentials. 550 * @old points to the original credentials. 551 * @gfp indicates the atomicity of any memory allocations. 552 * Prepare a new set of credentials by copying the data from the old set. 553 * @cred_transfer: 554 * @new points to the new credentials. 555 * @old points to the original credentials. 556 * Transfer data from original creds to new creds 557 * @cred_getsecid: 558 * Retrieve the security identifier of the cred structure @c 559 * @c contains the credentials, secid will be placed into @secid. 560 * In case of failure, @secid will be set to zero. 561 * @kernel_act_as: 562 * Set the credentials for a kernel service to act as (subjective context). 563 * @new points to the credentials to be modified. 564 * @secid specifies the security ID to be set 565 * The current task must be the one that nominated @secid. 566 * Return 0 if successful. 567 * @kernel_create_files_as: 568 * Set the file creation context in a set of credentials to be the same as 569 * the objective context of the specified inode. 570 * @new points to the credentials to be modified. 571 * @inode points to the inode to use as a reference. 572 * The current task must be the one that nominated @inode. 573 * Return 0 if successful. 574 * @kernel_module_request: 575 * Ability to trigger the kernel to automatically upcall to userspace for 576 * userspace to load a kernel module with the given name. 577 * @kmod_name name of the module requested by the kernel 578 * Return 0 if successful. 579 * @kernel_read_file: 580 * Read a file specified by userspace. 581 * @file contains the file structure pointing to the file being read 582 * by the kernel. 583 * @id kernel read file identifier 584 * Return 0 if permission is granted. 585 * @kernel_post_read_file: 586 * Read a file specified by userspace. 587 * @file contains the file structure pointing to the file being read 588 * by the kernel. 589 * @buf pointer to buffer containing the file contents. 590 * @size length of the file contents. 591 * @id kernel read file identifier 592 * Return 0 if permission is granted. 593 * @task_fix_setuid: 594 * Update the module's state after setting one or more of the user 595 * identity attributes of the current process. The @flags parameter 596 * indicates which of the set*uid system calls invoked this hook. If 597 * @new is the set of credentials that will be installed. Modifications 598 * should be made to this rather than to @current->cred. 599 * @old is the set of credentials that are being replaces 600 * @flags contains one of the LSM_SETID_* values. 601 * Return 0 on success. 602 * @task_setpgid: 603 * Check permission before setting the process group identifier of the 604 * process @p to @pgid. 605 * @p contains the task_struct for process being modified. 606 * @pgid contains the new pgid. 607 * Return 0 if permission is granted. 608 * @task_getpgid: 609 * Check permission before getting the process group identifier of the 610 * process @p. 611 * @p contains the task_struct for the process. 612 * Return 0 if permission is granted. 613 * @task_getsid: 614 * Check permission before getting the session identifier of the process 615 * @p. 616 * @p contains the task_struct for the process. 617 * Return 0 if permission is granted. 618 * @task_getsecid: 619 * Retrieve the security identifier of the process @p. 620 * @p contains the task_struct for the process and place is into @secid. 621 * In case of failure, @secid will be set to zero. 622 * 623 * @task_setnice: 624 * Check permission before setting the nice value of @p to @nice. 625 * @p contains the task_struct of process. 626 * @nice contains the new nice value. 627 * Return 0 if permission is granted. 628 * @task_setioprio 629 * Check permission before setting the ioprio value of @p to @ioprio. 630 * @p contains the task_struct of process. 631 * @ioprio contains the new ioprio value 632 * Return 0 if permission is granted. 633 * @task_getioprio 634 * Check permission before getting the ioprio value of @p. 635 * @p contains the task_struct of process. 636 * Return 0 if permission is granted. 637 * @task_prlimit: 638 * Check permission before getting and/or setting the resource limits of 639 * another task. 640 * @cred points to the cred structure for the current task. 641 * @tcred points to the cred structure for the target task. 642 * @flags contains the LSM_PRLIMIT_* flag bits indicating whether the 643 * resource limits are being read, modified, or both. 644 * Return 0 if permission is granted. 645 * @task_setrlimit: 646 * Check permission before setting the resource limits of process @p 647 * for @resource to @new_rlim. The old resource limit values can 648 * be examined by dereferencing (p->signal->rlim + resource). 649 * @p points to the task_struct for the target task's group leader. 650 * @resource contains the resource whose limit is being set. 651 * @new_rlim contains the new limits for @resource. 652 * Return 0 if permission is granted. 653 * @task_setscheduler: 654 * Check permission before setting scheduling policy and/or parameters of 655 * process @p based on @policy and @lp. 656 * @p contains the task_struct for process. 657 * @policy contains the scheduling policy. 658 * @lp contains the scheduling parameters. 659 * Return 0 if permission is granted. 660 * @task_getscheduler: 661 * Check permission before obtaining scheduling information for process 662 * @p. 663 * @p contains the task_struct for process. 664 * Return 0 if permission is granted. 665 * @task_movememory 666 * Check permission before moving memory owned by process @p. 667 * @p contains the task_struct for process. 668 * Return 0 if permission is granted. 669 * @task_kill: 670 * Check permission before sending signal @sig to @p. @info can be NULL, 671 * the constant 1, or a pointer to a siginfo structure. If @info is 1 or 672 * SI_FROMKERNEL(info) is true, then the signal should be viewed as coming 673 * from the kernel and should typically be permitted. 674 * SIGIO signals are handled separately by the send_sigiotask hook in 675 * file_security_ops. 676 * @p contains the task_struct for process. 677 * @info contains the signal information. 678 * @sig contains the signal value. 679 * @cred contains the cred of the process where the signal originated, or 680 * NULL if the current task is the originator. 681 * Return 0 if permission is granted. 682 * @task_prctl: 683 * Check permission before performing a process control operation on the 684 * current process. 685 * @option contains the operation. 686 * @arg2 contains a argument. 687 * @arg3 contains a argument. 688 * @arg4 contains a argument. 689 * @arg5 contains a argument. 690 * Return -ENOSYS if no-one wanted to handle this op, any other value to 691 * cause prctl() to return immediately with that value. 692 * @task_to_inode: 693 * Set the security attributes for an inode based on an associated task's 694 * security attributes, e.g. for /proc/pid inodes. 695 * @p contains the task_struct for the task. 696 * @inode contains the inode structure for the inode. 697 * 698 * Security hooks for Netlink messaging. 699 * 700 * @netlink_send: 701 * Save security information for a netlink message so that permission 702 * checking can be performed when the message is processed. The security 703 * information can be saved using the eff_cap field of the 704 * netlink_skb_parms structure. Also may be used to provide fine 705 * grained control over message transmission. 706 * @sk associated sock of task sending the message. 707 * @skb contains the sk_buff structure for the netlink message. 708 * Return 0 if the information was successfully saved and message 709 * is allowed to be transmitted. 710 * 711 * Security hooks for Unix domain networking. 712 * 713 * @unix_stream_connect: 714 * Check permissions before establishing a Unix domain stream connection 715 * between @sock and @other. 716 * @sock contains the sock structure. 717 * @other contains the peer sock structure. 718 * @newsk contains the new sock structure. 719 * Return 0 if permission is granted. 720 * @unix_may_send: 721 * Check permissions before connecting or sending datagrams from @sock to 722 * @other. 723 * @sock contains the socket structure. 724 * @other contains the peer socket structure. 725 * Return 0 if permission is granted. 726 * 727 * The @unix_stream_connect and @unix_may_send hooks were necessary because 728 * Linux provides an alternative to the conventional file name space for Unix 729 * domain sockets. Whereas binding and connecting to sockets in the file name 730 * space is mediated by the typical file permissions (and caught by the mknod 731 * and permission hooks in inode_security_ops), binding and connecting to 732 * sockets in the abstract name space is completely unmediated. Sufficient 733 * control of Unix domain sockets in the abstract name space isn't possible 734 * using only the socket layer hooks, since we need to know the actual target 735 * socket, which is not looked up until we are inside the af_unix code. 736 * 737 * Security hooks for socket operations. 738 * 739 * @socket_create: 740 * Check permissions prior to creating a new socket. 741 * @family contains the requested protocol family. 742 * @type contains the requested communications type. 743 * @protocol contains the requested protocol. 744 * @kern set to 1 if a kernel socket. 745 * Return 0 if permission is granted. 746 * @socket_post_create: 747 * This hook allows a module to update or allocate a per-socket security 748 * structure. Note that the security field was not added directly to the 749 * socket structure, but rather, the socket security information is stored 750 * in the associated inode. Typically, the inode alloc_security hook will 751 * allocate and and attach security information to 752 * sock->inode->i_security. This hook may be used to update the 753 * sock->inode->i_security field with additional information that wasn't 754 * available when the inode was allocated. 755 * @sock contains the newly created socket structure. 756 * @family contains the requested protocol family. 757 * @type contains the requested communications type. 758 * @protocol contains the requested protocol. 759 * @kern set to 1 if a kernel socket. 760 * @socket_socketpair: 761 * Check permissions before creating a fresh pair of sockets. 762 * @socka contains the first socket structure. 763 * @sockb contains the second socket structure. 764 * Return 0 if permission is granted and the connection was established. 765 * @socket_bind: 766 * Check permission before socket protocol layer bind operation is 767 * performed and the socket @sock is bound to the address specified in the 768 * @address parameter. 769 * @sock contains the socket structure. 770 * @address contains the address to bind to. 771 * @addrlen contains the length of address. 772 * Return 0 if permission is granted. 773 * @socket_connect: 774 * Check permission before socket protocol layer connect operation 775 * attempts to connect socket @sock to a remote address, @address. 776 * @sock contains the socket structure. 777 * @address contains the address of remote endpoint. 778 * @addrlen contains the length of address. 779 * Return 0 if permission is granted. 780 * @socket_listen: 781 * Check permission before socket protocol layer listen operation. 782 * @sock contains the socket structure. 783 * @backlog contains the maximum length for the pending connection queue. 784 * Return 0 if permission is granted. 785 * @socket_accept: 786 * Check permission before accepting a new connection. Note that the new 787 * socket, @newsock, has been created and some information copied to it, 788 * but the accept operation has not actually been performed. 789 * @sock contains the listening socket structure. 790 * @newsock contains the newly created server socket for connection. 791 * Return 0 if permission is granted. 792 * @socket_sendmsg: 793 * Check permission before transmitting a message to another socket. 794 * @sock contains the socket structure. 795 * @msg contains the message to be transmitted. 796 * @size contains the size of message. 797 * Return 0 if permission is granted. 798 * @socket_recvmsg: 799 * Check permission before receiving a message from a socket. 800 * @sock contains the socket structure. 801 * @msg contains the message structure. 802 * @size contains the size of message structure. 803 * @flags contains the operational flags. 804 * Return 0 if permission is granted. 805 * @socket_getsockname: 806 * Check permission before the local address (name) of the socket object 807 * @sock is retrieved. 808 * @sock contains the socket structure. 809 * Return 0 if permission is granted. 810 * @socket_getpeername: 811 * Check permission before the remote address (name) of a socket object 812 * @sock is retrieved. 813 * @sock contains the socket structure. 814 * Return 0 if permission is granted. 815 * @socket_getsockopt: 816 * Check permissions before retrieving the options associated with socket 817 * @sock. 818 * @sock contains the socket structure. 819 * @level contains the protocol level to retrieve option from. 820 * @optname contains the name of option to retrieve. 821 * Return 0 if permission is granted. 822 * @socket_setsockopt: 823 * Check permissions before setting the options associated with socket 824 * @sock. 825 * @sock contains the socket structure. 826 * @level contains the protocol level to set options for. 827 * @optname contains the name of the option to set. 828 * Return 0 if permission is granted. 829 * @socket_shutdown: 830 * Checks permission before all or part of a connection on the socket 831 * @sock is shut down. 832 * @sock contains the socket structure. 833 * @how contains the flag indicating how future sends and receives 834 * are handled. 835 * Return 0 if permission is granted. 836 * @socket_sock_rcv_skb: 837 * Check permissions on incoming network packets. This hook is distinct 838 * from Netfilter's IP input hooks since it is the first time that the 839 * incoming sk_buff @skb has been associated with a particular socket, @sk. 840 * Must not sleep inside this hook because some callers hold spinlocks. 841 * @sk contains the sock (not socket) associated with the incoming sk_buff. 842 * @skb contains the incoming network data. 843 * @socket_getpeersec_stream: 844 * This hook allows the security module to provide peer socket security 845 * state for unix or connected tcp sockets to userspace via getsockopt 846 * SO_GETPEERSEC. For tcp sockets this can be meaningful if the 847 * socket is associated with an ipsec SA. 848 * @sock is the local socket. 849 * @optval userspace memory where the security state is to be copied. 850 * @optlen userspace int where the module should copy the actual length 851 * of the security state. 852 * @len as input is the maximum length to copy to userspace provided 853 * by the caller. 854 * Return 0 if all is well, otherwise, typical getsockopt return 855 * values. 856 * @socket_getpeersec_dgram: 857 * This hook allows the security module to provide peer socket security 858 * state for udp sockets on a per-packet basis to userspace via 859 * getsockopt SO_GETPEERSEC. The application must first have indicated 860 * the IP_PASSSEC option via getsockopt. It can then retrieve the 861 * security state returned by this hook for a packet via the SCM_SECURITY 862 * ancillary message type. 863 * @skb is the skbuff for the packet being queried 864 * @secdata is a pointer to a buffer in which to copy the security data 865 * @seclen is the maximum length for @secdata 866 * Return 0 on success, error on failure. 867 * @sk_alloc_security: 868 * Allocate and attach a security structure to the sk->sk_security field, 869 * which is used to copy security attributes between local stream sockets. 870 * @sk_free_security: 871 * Deallocate security structure. 872 * @sk_clone_security: 873 * Clone/copy security structure. 874 * @sk_getsecid: 875 * Retrieve the LSM-specific secid for the sock to enable caching 876 * of network authorizations. 877 * @sock_graft: 878 * Sets the socket's isec sid to the sock's sid. 879 * @inet_conn_request: 880 * Sets the openreq's sid to socket's sid with MLS portion taken 881 * from peer sid. 882 * @inet_csk_clone: 883 * Sets the new child socket's sid to the openreq sid. 884 * @inet_conn_established: 885 * Sets the connection's peersid to the secmark on skb. 886 * @secmark_relabel_packet: 887 * check if the process should be allowed to relabel packets to 888 * the given secid 889 * @security_secmark_refcount_inc 890 * tells the LSM to increment the number of secmark labeling rules loaded 891 * @security_secmark_refcount_dec 892 * tells the LSM to decrement the number of secmark labeling rules loaded 893 * @req_classify_flow: 894 * Sets the flow's sid to the openreq sid. 895 * @tun_dev_alloc_security: 896 * This hook allows a module to allocate a security structure for a TUN 897 * device. 898 * @security pointer to a security structure pointer. 899 * Returns a zero on success, negative values on failure. 900 * @tun_dev_free_security: 901 * This hook allows a module to free the security structure for a TUN 902 * device. 903 * @security pointer to the TUN device's security structure 904 * @tun_dev_create: 905 * Check permissions prior to creating a new TUN device. 906 * @tun_dev_attach_queue: 907 * Check permissions prior to attaching to a TUN device queue. 908 * @security pointer to the TUN device's security structure. 909 * @tun_dev_attach: 910 * This hook can be used by the module to update any security state 911 * associated with the TUN device's sock structure. 912 * @sk contains the existing sock structure. 913 * @security pointer to the TUN device's security structure. 914 * @tun_dev_open: 915 * This hook can be used by the module to update any security state 916 * associated with the TUN device's security structure. 917 * @security pointer to the TUN devices's security structure. 918 * 919 * Security hooks for SCTP 920 * 921 * @sctp_assoc_request: 922 * Passes the @ep and @chunk->skb of the association INIT packet to 923 * the security module. 924 * @ep pointer to sctp endpoint structure. 925 * @skb pointer to skbuff of association packet. 926 * Return 0 on success, error on failure. 927 * @sctp_bind_connect: 928 * Validiate permissions required for each address associated with sock 929 * @sk. Depending on @optname, the addresses will be treated as either 930 * for a connect or bind service. The @addrlen is calculated on each 931 * ipv4 and ipv6 address using sizeof(struct sockaddr_in) or 932 * sizeof(struct sockaddr_in6). 933 * @sk pointer to sock structure. 934 * @optname name of the option to validate. 935 * @address list containing one or more ipv4/ipv6 addresses. 936 * @addrlen total length of address(s). 937 * Return 0 on success, error on failure. 938 * @sctp_sk_clone: 939 * Called whenever a new socket is created by accept(2) (i.e. a TCP 940 * style socket) or when a socket is 'peeled off' e.g userspace 941 * calls sctp_peeloff(3). 942 * @ep pointer to current sctp endpoint structure. 943 * @sk pointer to current sock structure. 944 * @sk pointer to new sock structure. 945 * 946 * Security hooks for Infiniband 947 * 948 * @ib_pkey_access: 949 * Check permission to access a pkey when modifing a QP. 950 * @subnet_prefix the subnet prefix of the port being used. 951 * @pkey the pkey to be accessed. 952 * @sec pointer to a security structure. 953 * @ib_endport_manage_subnet: 954 * Check permissions to send and receive SMPs on a end port. 955 * @dev_name the IB device name (i.e. mlx4_0). 956 * @port_num the port number. 957 * @sec pointer to a security structure. 958 * @ib_alloc_security: 959 * Allocate a security structure for Infiniband objects. 960 * @sec pointer to a security structure pointer. 961 * Returns 0 on success, non-zero on failure 962 * @ib_free_security: 963 * Deallocate an Infiniband security structure. 964 * @sec contains the security structure to be freed. 965 * 966 * Security hooks for XFRM operations. 967 * 968 * @xfrm_policy_alloc_security: 969 * @ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy 970 * Database used by the XFRM system. 971 * @sec_ctx contains the security context information being provided by 972 * the user-level policy update program (e.g., setkey). 973 * Allocate a security structure to the xp->security field; the security 974 * field is initialized to NULL when the xfrm_policy is allocated. 975 * Return 0 if operation was successful (memory to allocate, legal context) 976 * @gfp is to specify the context for the allocation 977 * @xfrm_policy_clone_security: 978 * @old_ctx contains an existing xfrm_sec_ctx. 979 * @new_ctxp contains a new xfrm_sec_ctx being cloned from old. 980 * Allocate a security structure in new_ctxp that contains the 981 * information from the old_ctx structure. 982 * Return 0 if operation was successful (memory to allocate). 983 * @xfrm_policy_free_security: 984 * @ctx contains the xfrm_sec_ctx 985 * Deallocate xp->security. 986 * @xfrm_policy_delete_security: 987 * @ctx contains the xfrm_sec_ctx. 988 * Authorize deletion of xp->security. 989 * @xfrm_state_alloc: 990 * @x contains the xfrm_state being added to the Security Association 991 * Database by the XFRM system. 992 * @sec_ctx contains the security context information being provided by 993 * the user-level SA generation program (e.g., setkey or racoon). 994 * Allocate a security structure to the x->security field; the security 995 * field is initialized to NULL when the xfrm_state is allocated. Set the 996 * context to correspond to sec_ctx. Return 0 if operation was successful 997 * (memory to allocate, legal context). 998 * @xfrm_state_alloc_acquire: 999 * @x contains the xfrm_state being added to the Security Association 1000 * Database by the XFRM system.
1001 * @polsec contains the policy's security context. 1002 * @secid contains the secid from which to take the mls portion of the 1003 * context. 1004 * Allocate a security structure to the x->security field; the security 1005 * field is initialized to NULL when the xfrm_state is allocated. Set the 1006 * context to correspond to secid. Return 0 if operation was successful 1007 * (memory to allocate, legal context). 1008 * @xfrm_state_free_security: 1009 * @x contains the xfrm_state. 1010 * Deallocate x->security. 1011 * @xfrm_state_delete_security: 1012 * @x contains the xfrm_state. 1013 * Authorize deletion of x->security. 1014 * @xfrm_policy_lookup: 1015 * @ctx contains the xfrm_sec_ctx for which the access control is being 1016 * checked. 1017 * @fl_secid contains the flow security label that is used to authorize 1018 * access to the policy xp. 1019 * @dir contains the direction of the flow (input or output). 1020 * Check permission when a flow selects a xfrm_policy for processing 1021 * XFRMs on a packet. The hook is called when selecting either a 1022 * per-socket policy or a generic xfrm policy. 1023 * Return 0 if permission is granted, -ESRCH otherwise, or -errno 1024 * on other errors. 1025 * @xfrm_state_pol_flow_match: 1026 * @x contains the state to match. 1027 * @xp contains the policy to check for a match. 1028 * @fl contains the flow to check for a match. 1029 * Return 1 if there is a match. 1030 * @xfrm_decode_session: 1031 * @skb points to skb to decode. 1032 * @secid points to the flow key secid to set. 1033 * @ckall says if all xfrms used should be checked for same secid. 1034 * Return 0 if ckall is zero or all xfrms used have the same secid. 1035 * 1036 * Security hooks affecting all Key Management operations 1037 * 1038 * @key_alloc: 1039 * Permit allocation of a key and assign security data. Note that key does 1040 * not have a serial number assigned at this point. 1041 * @key points to the key. 1042 * @flags is the allocation flags 1043 * Return 0 if permission is granted, -ve error otherwise. 1044 * @key_free: 1045 * Notification of destruction; free security data. 1046 * @key points to the key. 1047 * No return value. 1048 * @key_permission: 1049 * See whether a specific operational right is granted to a process on a 1050 * key. 1051 * @key_ref refers to the key (key pointer + possession attribute bit). 1052 * @cred points to the credentials to provide the context against which to 1053 * evaluate the security data on the key. 1054 * @perm describes the combination of permissions required of this key. 1055 * Return 0 if permission is granted, -ve error otherwise. 1056 * @key_getsecurity: 1057 * Get a textual representation of the security context attached to a key 1058 * for the purposes of honouring KEYCTL_GETSECURITY. This function 1059 * allocates the storage for the NUL-terminated string and the caller 1060 * should free it. 1061 * @key points to the key to be queried. 1062 * @_buffer points to a pointer that should be set to point to the 1063 * resulting string (if no label or an error occurs). 1064 * Return the length of the string (including terminating NUL) or -ve if 1065 * an error. 1066 * May also return 0 (and a NULL buffer pointer) if there is no label. 1067 * 1068 * Security hooks affecting all System V IPC operations. 1069 * 1070 * @ipc_permission: 1071 * Check permissions for access to IPC 1072 * @ipcp contains the kernel IPC permission structure 1073 * @flag contains the desired (requested) permission set 1074 * Return 0 if permission is granted. 1075 * @ipc_getsecid: 1076 * Get the secid associated with the ipc object. 1077 * @ipcp contains the kernel IPC permission structure. 1078 * @secid contains a pointer to the location where result will be saved. 1079 * In case of failure, @secid will be set to zero. 1080 * 1081 * Security hooks for individual messages held in System V IPC message queues 1082 * @msg_msg_alloc_security: 1083 * Allocate and attach a security structure to the msg->security field. 1084 * The security field is initialized to NULL when the structure is first 1085 * created. 1086 * @msg contains the message structure to be modified. 1087 * Return 0 if operation was successful and permission is granted. 1088 * @msg_msg_free_security: 1089 * Deallocate the security structure for this message. 1090 * @msg contains the message structure to be modified. 1091 * 1092 * Security hooks for System V IPC Message Queues 1093 * 1094 * @msg_queue_alloc_security: 1095 * Allocate and attach a security structure to the 1096 * msq->q_perm.security field. The security field is initialized to 1097 * NULL when the structure is first created. 1098 * @msq contains the message queue structure to be modified. 1099 * Return 0 if operation was successful and permission is granted. 1100 * @msg_queue_free_security: 1101 * Deallocate security structure for this message queue. 1102 * @msq contains the message queue structure to be modified. 1103 * @msg_queue_associate: 1104 * Check permission when a message queue is requested through the 1105 * msgget system call. This hook is only called when returning the 1106 * message queue identifier for an existing message queue, not when a 1107 * new message queue is created. 1108 * @msq contains the message queue to act upon. 1109 * @msqflg contains the operation control flags. 1110 * Return 0 if permission is granted. 1111 * @msg_queue_msgctl: 1112 * Check permission when a message control operation specified by @cmd 1113 * is to be performed on the message queue @msq. 1114 * The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO. 1115 * @msq contains the message queue to act upon. May be NULL. 1116 * @cmd contains the operation to be performed. 1117 * Return 0 if permission is granted. 1118 * @msg_queue_msgsnd: 1119 * Check permission before a message, @msg, is enqueued on the message 1120 * queue, @msq. 1121 * @msq contains the message queue to send message to. 1122 * @msg contains the message to be enqueued. 1123 * @msqflg contains operational flags. 1124 * Return 0 if permission is granted. 1125 * @msg_queue_msgrcv: 1126 * Check permission before a message, @msg, is removed from the message 1127 * queue, @msq. The @target task structure contains a pointer to the 1128 * process that will be receiving the message (not equal to the current 1129 * process when inline receives are being performed). 1130 * @msq contains the message queue to retrieve message from. 1131 * @msg contains the message destination. 1132 * @target contains the task structure for recipient process. 1133 * @type contains the type of message requested. 1134 * @mode contains the operational flags. 1135 * Return 0 if permission is granted. 1136 * 1137 * Security hooks for System V Shared Memory Segments 1138 * 1139 * @shm_alloc_security: 1140 * Allocate and attach a security structure to the shp->shm_perm.security 1141 * field. The security field is initialized to NULL when the structure is 1142 * first created. 1143 * @shp contains the shared memory structure to be modified. 1144 * Return 0 if operation was successful and permission is granted. 1145 * @shm_free_security: 1146 * Deallocate the security struct for this memory segment. 1147 * @shp contains the shared memory structure to be modified. 1148 * @shm_associate: 1149 * Check permission when a shared memory region is requested through the 1150 * shmget system call. This hook is only called when returning the shared 1151 * memory region identifier for an existing region, not when a new shared 1152 * memory region is created. 1153 * @shp contains the shared memory structure to be modified. 1154 * @shmflg contains the operation control flags. 1155 * Return 0 if permission is granted. 1156 * @shm_shmctl: 1157 * Check permission when a shared memory control operation specified by 1158 * @cmd is to be performed on the shared memory region @shp. 1159 * The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO. 1160 * @shp contains shared memory structure to be modified. 1161 * @cmd contains the operation to be performed. 1162 * Return 0 if permission is granted. 1163 * @shm_shmat: 1164 * Check permissions prior to allowing the shmat system call to attach the 1165 * shared memory segment @shp to the data segment of the calling process. 1166 * The attaching address is specified by @shmaddr. 1167 * @shp contains the shared memory structure to be modified. 1168 * @shmaddr contains the address to attach memory region to. 1169 * @shmflg contains the operational flags. 1170 * Return 0 if permission is granted. 1171 * 1172 * Security hooks for System V Semaphores 1173 * 1174 * @sem_alloc_security: 1175 * Allocate and attach a security structure to the sma->sem_perm.security 1176 * field. The security field is initialized to NULL when the structure is 1177 * first created. 1178 * @sma contains the semaphore structure 1179 * Return 0 if operation was successful and permission is granted. 1180 * @sem_free_security: 1181 * deallocate security struct for this semaphore 1182 * @sma contains the semaphore structure. 1183 * @sem_associate: 1184 * Check permission when a semaphore is requested through the semget 1185 * system call. This hook is only called when returning the semaphore 1186 * identifier for an existing semaphore, not when a new one must be 1187 * created. 1188 * @sma contains the semaphore structure. 1189 * @semflg contains the operation control flags. 1190 * Return 0 if permission is granted. 1191 * @sem_semctl: 1192 * Check permission when a semaphore operation specified by @cmd is to be 1193 * performed on the semaphore @sma. The @sma may be NULL, e.g. for 1194 * IPC_INFO or SEM_INFO. 1195 * @sma contains the semaphore structure. May be NULL. 1196 * @cmd contains the operation to be performed. 1197 * Return 0 if permission is granted. 1198 * @sem_semop: 1199 * Check permissions before performing operations on members of the 1200 * semaphore set @sma. If the @alter flag is nonzero, the semaphore set 1201 * may be modified. 1202 * @sma contains the semaphore structure. 1203 * @sops contains the operations to perform. 1204 * @nsops contains the number of operations to perform. 1205 * @alter contains the flag indicating whether changes are to be made. 1206 * Return 0 if permission is granted. 1207 * 1208 * @binder_set_context_mgr: 1209 * Check whether @mgr is allowed to be the binder context manager. 1210 * @mgr contains the task_struct for the task being registered. 1211 * Return 0 if permission is granted. 1212 * @binder_transaction: 1213 * Check whether @from is allowed to invoke a binder transaction call 1214 * to @to. 1215 * @from contains the task_struct for the sending task. 1216 * @to contains the task_struct for the receiving task. 1217 * @binder_transfer_binder: 1218 * Check whether @from is allowed to transfer a binder reference to @to. 1219 * @from contains the task_struct for the sending task. 1220 * @to contains the task_struct for the receiving task. 1221 * @binder_transfer_file: 1222 * Check whether @from is allowed to transfer @file to @to. 1223 * @from contains the task_struct for the sending task. 1224 * @file contains the struct file being transferred. 1225 * @to contains the task_struct for the receiving task. 1226 * 1227 * @ptrace_access_check: 1228 * Check permission before allowing the current process to trace the 1229 * @child process. 1230 * Security modules may also want to perform a process tracing check 1231 * during an execve in the set_security or apply_creds hooks of 1232 * tracing check during an execve in the bprm_set_creds hook of 1233 * binprm_security_ops if the process is being traced and its security 1234 * attributes would be changed by the execve. 1235 * @child contains the task_struct structure for the target process. 1236 * @mode contains the PTRACE_MODE flags indicating the form of access. 1237 * Return 0 if permission is granted. 1238 * @ptrace_traceme: 1239 * Check that the @parent process has sufficient permission to trace the 1240 * current process before allowing the current process to present itself 1241 * to the @parent process for tracing. 1242 * @parent contains the task_struct structure for debugger process. 1243 * Return 0 if permission is granted. 1244 * @capget: 1245 * Get the @effective, @inheritable, and @permitted capability sets for 1246 * the @target process. The hook may also perform permission checking to 1247 * determine if the current process is allowed to see the capability sets 1248 * of the @target process. 1249 * @target contains the task_struct structure for target process. 1250 * @effective contains the effective capability set. 1251 * @inheritable contains the inheritable capability set. 1252 * @permitted contains the permitted capability set. 1253 * Return 0 if the capability sets were successfully obtained. 1254 * @capset: 1255 * Set the @effective, @inheritable, and @permitted capability sets for 1256 * the current process. 1257 * @new contains the new credentials structure for target process. 1258 * @old contains the current credentials structure for target process. 1259 * @effective contains the effective capability set. 1260 * @inheritable contains the inheritable capability set. 1261 * @permitted contains the permitted capability set. 1262 * Return 0 and update @new if permission is granted. 1263 * @capable: 1264 * Check whether the @tsk process has the @cap capability in the indicated 1265 * credentials. 1266 * @cred contains the credentials to use. 1267 * @ns contains the user namespace we want the capability in 1268 * @cap contains the capability <include/linux/capability.h>. 1269 * @audit contains whether to write an audit message or not 1270 * Return 0 if the capability is granted for @tsk. 1271 * @syslog: 1272 * Check permission before accessing the kernel message ring or changing 1273 * logging to the console. 1274 * See the syslog(2) manual page for an explanation of the @type values. 1275 * @type contains the type of action. 1276 * @from_file indicates the context of action (if it came from /proc). 1277 * Return 0 if permission is granted. 1278 * @settime: 1279 * Check permission to change the system time. 1280 * struct timespec64 is defined in include/linux/time64.h and timezone 1281 * is defined in include/linux/time.h 1282 * @ts contains new time 1283 * @tz contains new timezone 1284 * Return 0 if permission is granted. 1285 * @vm_enough_memory: 1286 * Check permissions for allocating a new virtual mapping. 1287 * @mm contains the mm struct it is being added to. 1288 * @pages contains the number of pages. 1289 * Return 0 if permission is granted. 1290 * 1291 * @ismaclabel: 1292 * Check if the extended attribute specified by @name 1293 * represents a MAC label. Returns 1 if name is a MAC 1294 * attribute otherwise returns 0. 1295 * @name full extended attribute name to check against 1296 * LSM as a MAC label. 1297 * 1298 * @secid_to_secctx: 1299 * Convert secid to security context. If secdata is NULL the length of 1300 * the result will be returned in seclen, but no secdata will be returned. 1301 * This does mean that the length could change between calls to check the 1302 * length and the next call which actually allocates and returns the 1303 * secdata. 1304 * @secid contains the security ID. 1305 * @secdata contains the pointer that stores the converted security 1306 * context. 1307 * @seclen pointer which contains the length of the data 1308 * @secctx_to_secid: 1309 * Convert security context to secid. 1310 * @secid contains the pointer to the generated security ID. 1311 * @secdata contains the security context. 1312 * 1313 * @release_secctx: 1314 * Release the security context. 1315 * @secdata contains the security context. 1316 * @seclen contains the length of the security context. 1317 * 1318 * Security hooks for Audit 1319 * 1320 * @audit_rule_init: 1321 * Allocate and initialize an LSM audit rule structure. 1322 * @field contains the required Audit action. 1323 * Fields flags are defined in include/linux/audit.h 1324 * @op contains the operator the rule uses. 1325 * @rulestr contains the context where the rule will be applied to. 1326 * @lsmrule contains a pointer to receive the result. 1327 * Return 0 if @lsmrule has been successfully set, 1328 * -EINVAL in case of an invalid rule. 1329 * 1330 * @audit_rule_known: 1331 * Specifies whether given @rule contains any fields related to 1332 * current LSM. 1333 * @rule contains the audit rule of interest. 1334 * Return 1 in case of relation found, 0 otherwise. 1335 * 1336 * @audit_rule_match: 1337 * Determine if given @secid matches a rule previously approved 1338 * by @audit_rule_known. 1339 * @secid contains the security id in question. 1340 * @field contains the field which relates to current LSM. 1341 * @op contains the operator that will be used for matching. 1342 * @rule points to the audit rule that will be checked against. 1343 * @actx points to the audit context associated with the check. 1344 * Return 1 if secid matches the rule, 0 if it does not, -ERRNO on failure. 1345 * 1346 * @audit_rule_free: 1347 * Deallocate the LSM audit rule structure previously allocated by 1348 * audit_rule_init. 1349 * @rule contains the allocated rule 1350 * 1351 * @inode_invalidate_secctx: 1352 * Notify the security module that it must revalidate the security context 1353 * of an inode. 1354 * 1355 * @inode_notifysecctx: 1356 * Notify the security module of what the security context of an inode 1357 * should be. Initializes the incore security context managed by the 1358 * security module for this inode. Example usage: NFS client invokes 1359 * this hook to initialize the security context in its incore inode to the 1360 * value provided by the server for the file when the server returned the 1361 * file's attributes to the client. 1362 * 1363 * Must be called with inode->i_mutex locked. 1364 * 1365 * @inode we wish to set the security context of. 1366 * @ctx contains the string which we wish to set in the inode. 1367 * @ctxlen contains the length of @ctx. 1368 * 1369 * @inode_setsecctx: 1370 * Change the security context of an inode. Updates the 1371 * incore security context managed by the security module and invokes the 1372 * fs code as needed (via __vfs_setxattr_noperm) to update any backing 1373 * xattrs that represent the context. Example usage: NFS server invokes 1374 * this hook to change the security context in its incore inode and on the 1375 * backing filesystem to a value provided by the client on a SETATTR 1376 * operation. 1377 * 1378 * Must be called with inode->i_mutex locked. 1379 * 1380 * @dentry contains the inode we wish to set the security context of. 1381 * @ctx contains the string which we wish to set in the inode. 1382 * @ctxlen contains the length of @ctx. 1383 * 1384 * @inode_getsecctx: 1385 * On success, returns 0 and fills out @ctx and @ctxlen with the security 1386 * context for the given @inode. 1387 * 1388 * @inode we wish to get the security context of. 1389 * @ctx is a pointer in which to place the allocated security context. 1390 * @ctxlen points to the place to put the length of @ctx. 1391 * 1392 * Security hooks for using the eBPF maps and programs functionalities through 1393 * eBPF syscalls. 1394 * 1395 * @bpf: 1396 * Do a initial check for all bpf syscalls after the attribute is copied 1397 * into the kernel. The actual security module can implement their own 1398 * rules to check the specific cmd they need. 1399 * 1400 * @bpf_map: 1401 * Do a check when the kernel generate and return a file descriptor for 1402 * eBPF maps. 1403 * 1404 * @map: bpf map that we want to access 1405 * @mask: the access flags 1406 * 1407 * @bpf_prog: 1408 * Do a check when the kernel generate and return a file descriptor for 1409 * eBPF programs. 1410 * 1411 * @prog: bpf prog that userspace want to use. 1412 * 1413 * @bpf_map_alloc_security: 1414 * Initialize the security field inside bpf map. 1415 * 1416 * @bpf_map_free_security: 1417 * Clean up the security information stored inside bpf map. 1418 * 1419 * @bpf_prog_alloc_security: 1420 * Initialize the security field inside bpf program. 1421 * 1422 * @bpf_prog_free_security: 1423 * Clean up the security information stored inside bpf prog. 1424 * 1425 */ 1426union security_list_options { 1427 int (*binder_set_context_mgr)(struct task_struct *mgr); 1428 int (*binder_transaction)(struct task_struct *from, 1429 struct task_struct *to); 1430 int (*binder_transfer_binder)(struct task_struct *from, 1431 struct task_struct *to); 1432 int (*binder_transfer_file)(struct task_struct *from, 1433 struct task_struct *to, 1434 struct file *file); 1435 1436 int (*ptrace_access_check)(struct task_struct *child, 1437 unsigned int mode); 1438 int (*ptrace_traceme)(struct task_struct *parent); 1439 int (*capget)(struct task_struct *target, kernel_cap_t *effective, 1440 kernel_cap_t *inheritable, kernel_cap_t *permitted); 1441 int (*capset)(struct cred *new, const struct cred *old, 1442 const kernel_cap_t *effective, 1443 const kernel_cap_t *inheritable, 1444 const kernel_cap_t *permitted); 1445 int (*capable)(const struct cred *cred, struct user_namespace *ns, 1446 int cap, int audit); 1447 int (*quotactl)(int cmds, int type, int id, struct super_block *sb); 1448 int (*quota_on)(struct dentry *dentry); 1449 int (*syslog)(int type); 1450 int (*settime)(const struct timespec64 *ts, const struct timezone *tz); 1451 int (*vm_enough_memory)(struct mm_struct *mm, long pages); 1452 1453 int (*bprm_set_creds)(struct linux_binprm *bprm); 1454 int (*bprm_check_security)(struct linux_binprm *bprm); 1455 void (*bprm_committing_creds)(struct linux_binprm *bprm); 1456 void (*bprm_committed_creds)(struct linux_binprm *bprm); 1457 1458 int (*sb_alloc_security)(struct super_block *sb); 1459 void (*sb_free_security)(struct super_block *sb); 1460 int (*sb_copy_data)(char *orig, char *copy); 1461 int (*sb_remount)(struct super_block *sb, void *data); 1462 int (*sb_kern_mount)(struct super_block *sb, int flags, void *data); 1463 int (*sb_show_options)(struct seq_file *m, struct super_block *sb); 1464 int (*sb_statfs)(struct dentry *dentry); 1465 int (*sb_mount)(const char *dev_name, const struct path *path, 1466 const char *type, unsigned long flags, void *data); 1467 int (*sb_umount)(struct vfsmount *mnt, int flags); 1468 int (*sb_pivotroot)(const struct path *old_path, const struct path *new_path); 1469 int (*sb_set_mnt_opts)(struct super_block *sb, 1470 struct security_mnt_opts *opts, 1471 unsigned long kern_flags, 1472 unsigned long *set_kern_flags); 1473 int (*sb_clone_mnt_opts)(const struct super_block *oldsb, 1474 struct super_block *newsb, 1475 unsigned long kern_flags, 1476 unsigned long *set_kern_flags); 1477 int (*sb_parse_opts_str)(char *options, struct security_mnt_opts *opts); 1478 int (*dentry_init_security)(struct dentry *dentry, int mode, 1479 const struct qstr *name, void **ctx, 1480 u32 *ctxlen); 1481 int (*dentry_create_files_as)(struct dentry *dentry, int mode, 1482 struct qstr *name, 1483 const struct cred *old, 1484 struct cred *new); 1485 1486 1487#ifdef CONFIG_SECURITY_PATH 1488 int (*path_unlink)(const struct path *dir, struct dentry *dentry); 1489 int (*path_mkdir)(const struct path *dir, struct dentry *dentry, 1490 umode_t mode); 1491 int (*path_rmdir)(const struct path *dir, struct dentry *dentry); 1492 int (*path_mknod)(const struct path *dir, struct dentry *dentry, 1493 umode_t mode, unsigned int dev); 1494 int (*path_truncate)(const struct path *path); 1495 int (*path_symlink)(const struct path *dir, struct dentry *dentry, 1496 const char *old_name); 1497 int (*path_link)(struct dentry *old_dentry, const struct path *new_dir, 1498 struct dentry *new_dentry); 1499 int (*path_rename)(const struct path *old_dir, struct dentry *old_dentry, 1500 const struct path *new_dir, 1501 struct dentry *new_dentry); 1502 int (*path_chmod)(const struct path *path, umode_t mode); 1503 int (*path_chown)(const struct path *path, kuid_t uid, kgid_t gid); 1504 int (*path_chroot)(const struct path *path); 1505#endif 1506 1507 int (*inode_alloc_security)(struct inode *inode); 1508 void (*inode_free_security)(struct inode *inode); 1509 int (*inode_init_security)(struct inode *inode, struct inode *dir, 1510 const struct qstr *qstr, 1511 const char **name, void **value, 1512 size_t *len); 1513 int (*inode_create)(struct inode *dir, struct dentry *dentry, 1514 umode_t mode); 1515 int (*inode_link)(struct dentry *old_dentry, struct inode *dir, 1516 struct dentry *new_dentry); 1517 int (*inode_unlink)(struct inode *dir, struct dentry *dentry); 1518 int (*inode_symlink)(struct inode *dir, struct dentry *dentry, 1519 const char *old_name); 1520 int (*inode_mkdir)(struct inode *dir, struct dentry *dentry, 1521 umode_t mode); 1522 int (*inode_rmdir)(struct inode *dir, struct dentry *dentry); 1523 int (*inode_mknod)(struct inode *dir, struct dentry *dentry, 1524 umode_t mode, dev_t dev); 1525 int (*inode_rename)(struct inode *old_dir, struct dentry *old_dentry, 1526 struct inode *new_dir, 1527 struct dentry *new_dentry); 1528 int (*inode_readlink)(struct dentry *dentry); 1529 int (*inode_follow_link)(struct dentry *dentry, struct inode *inode, 1530 bool rcu); 1531 int (*inode_permission)(struct inode *inode, int mask); 1532 int (*inode_setattr)(struct dentry *dentry, struct iattr *attr); 1533 int (*inode_getattr)(const struct path *path); 1534 int (*inode_setxattr)(struct dentry *dentry, const char *name, 1535 const void *value, size_t size, int flags); 1536 void (*inode_post_setxattr)(struct dentry *dentry, const char *name, 1537 const void *value, size_t size, 1538 int flags); 1539 int (*inode_getxattr)(struct dentry *dentry, const char *name); 1540 int (*inode_listxattr)(struct dentry *dentry); 1541 int (*inode_removexattr)(struct dentry *dentry, const char *name); 1542 int (*inode_need_killpriv)(struct dentry *dentry); 1543 int (*inode_killpriv)(struct dentry *dentry); 1544 int (*inode_getsecurity)(struct inode *inode, const char *name, 1545 void **buffer, bool alloc); 1546 int (*inode_setsecurity)(struct inode *inode, const char *name, 1547 const void *value, size_t size, 1548 int flags); 1549 int (*inode_listsecurity)(struct inode *inode, char *buffer, 1550 size_t buffer_size); 1551 void (*inode_getsecid)(struct inode *inode, u32 *secid); 1552 int (*inode_copy_up)(struct dentry *src, struct cred **new); 1553 int (*inode_copy_up_xattr)(const char *name); 1554 1555 int (*file_permission)(struct file *file, int mask); 1556 int (*file_alloc_security)(struct file *file); 1557 void (*file_free_security)(struct file *file); 1558 int (*file_ioctl)(struct file *file, unsigned int cmd, 1559 unsigned long arg); 1560 int (*mmap_addr)(unsigned long addr); 1561 int (*mmap_file)(struct file *file, unsigned long reqprot, 1562 unsigned long prot, unsigned long flags); 1563 int (*file_mprotect)(struct vm_area_struct *vma, unsigned long reqprot, 1564 unsigned long prot); 1565 int (*file_lock)(struct file *file, unsigned int cmd); 1566 int (*file_fcntl)(struct file *file, unsigned int cmd, 1567 unsigned long arg); 1568 void (*file_set_fowner)(struct file *file); 1569 int (*file_send_sigiotask)(struct task_struct *tsk, 1570 struct fown_struct *fown, int sig); 1571 int (*file_receive)(struct file *file); 1572 int (*file_open)(struct file *file, const struct cred *cred); 1573 1574 int (*task_alloc)(struct task_struct *task, unsigned long clone_flags); 1575 void (*task_free)(struct task_struct *task); 1576 int (*cred_alloc_blank)(struct cred *cred, gfp_t gfp); 1577 void (*cred_free)(struct cred *cred); 1578 int (*cred_prepare)(struct cred *new, const struct cred *old, 1579 gfp_t gfp); 1580 void (*cred_transfer)(struct cred *new, const struct cred *old); 1581 void (*cred_getsecid)(const struct cred *c, u32 *secid); 1582 int (*kernel_act_as)(struct cred *new, u32 secid); 1583 int (*kernel_create_files_as)(struct cred *new, struct inode *inode); 1584 int (*kernel_module_request)(char *kmod_name); 1585 int (*kernel_read_file)(struct file *file, enum kernel_read_file_id id); 1586 int (*kernel_post_read_file)(struct file *file, char *buf, loff_t size, 1587 enum kernel_read_file_id id); 1588 int (*task_fix_setuid)(struct cred *new, const struct cred *old, 1589 int flags); 1590 int (*task_setpgid)(struct task_struct *p, pid_t pgid); 1591 int (*task_getpgid)(struct task_struct *p); 1592 int (*task_getsid)(struct task_struct *p); 1593 void (*task_getsecid)(struct task_struct *p, u32 *secid); 1594 int (*task_setnice)(struct task_struct *p, int nice); 1595 int (*task_setioprio)(struct task_struct *p, int ioprio); 1596 int (*task_getioprio)(struct task_struct *p); 1597 int (*task_prlimit)(const struct cred *cred, const struct cred *tcred, 1598 unsigned int flags); 1599 int (*task_setrlimit)(struct task_struct *p, unsigned int resource, 1600 struct rlimit *new_rlim); 1601 int (*task_setscheduler)(struct task_struct *p); 1602 int (*task_getscheduler)(struct task_struct *p); 1603 int (*task_movememory)(struct task_struct *p); 1604 int (*task_kill)(struct task_struct *p, struct siginfo *info, 1605 int sig, const struct cred *cred); 1606 int (*task_prctl)(int option, unsigned long arg2, unsigned long arg3, 1607 unsigned long arg4, unsigned long arg5); 1608 void (*task_to_inode)(struct task_struct *p, struct inode *inode); 1609 1610 int (*ipc_permission)(struct kern_ipc_perm *ipcp, short flag); 1611 void (*ipc_getsecid)(struct kern_ipc_perm *ipcp, u32 *secid); 1612 1613 int (*msg_msg_alloc_security)(struct msg_msg *msg); 1614 void (*msg_msg_free_security)(struct msg_msg *msg); 1615 1616 int (*msg_queue_alloc_security)(struct kern_ipc_perm *msq); 1617 void (*msg_queue_free_security)(struct kern_ipc_perm *msq); 1618 int (*msg_queue_associate)(struct kern_ipc_perm *msq, int msqflg); 1619 int (*msg_queue_msgctl)(struct kern_ipc_perm *msq, int cmd); 1620 int (*msg_queue_msgsnd)(struct kern_ipc_perm *msq, struct msg_msg *msg, 1621 int msqflg); 1622 int (*msg_queue_msgrcv)(struct kern_ipc_perm *msq, struct msg_msg *msg, 1623 struct task_struct *target, long type, 1624 int mode); 1625 1626 int (*shm_alloc_security)(struct kern_ipc_perm *shp); 1627 void (*shm_free_security)(struct kern_ipc_perm *shp); 1628 int (*shm_associate)(struct kern_ipc_perm *shp, int shmflg); 1629 int (*shm_shmctl)(struct kern_ipc_perm *shp, int cmd); 1630 int (*shm_shmat)(struct kern_ipc_perm *shp, char __user *shmaddr, 1631 int shmflg); 1632 1633 int (*sem_alloc_security)(struct kern_ipc_perm *sma); 1634 void (*sem_free_security)(struct kern_ipc_perm *sma); 1635 int (*sem_associate)(struct kern_ipc_perm *sma, int semflg); 1636 int (*sem_semctl)(struct kern_ipc_perm *sma, int cmd); 1637 int (*sem_semop)(struct kern_ipc_perm *sma, struct sembuf *sops, 1638 unsigned nsops, int alter); 1639 1640 int (*netlink_send)(struct sock *sk, struct sk_buff *skb); 1641 1642 void (*d_instantiate)(struct dentry *dentry, struct inode *inode); 1643 1644 int (*getprocattr)(struct task_struct *p, char *name, char **value); 1645 int (*setprocattr)(const char *name, void *value, size_t size); 1646 int (*ismaclabel)(const char *name); 1647 int (*secid_to_secctx)(u32 secid, char **secdata, u32 *seclen); 1648 int (*secctx_to_secid)(const char *secdata, u32 seclen, u32 *secid); 1649 void (*release_secctx)(char *secdata, u32 seclen); 1650 1651 void (*inode_invalidate_secctx)(struct inode *inode); 1652 int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen); 1653 int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen); 1654 int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen); 1655 1656#ifdef CONFIG_SECURITY_NETWORK 1657 int (*unix_stream_connect)(struct sock *sock, struct sock *other, 1658 struct sock *newsk); 1659 int (*unix_may_send)(struct socket *sock, struct socket *other); 1660 1661 int (*socket_create)(int family, int type, int protocol, int kern); 1662 int (*socket_post_create)(struct socket *sock, int family, int type, 1663 int protocol, int kern); 1664 int (*socket_socketpair)(struct socket *socka, struct socket *sockb); 1665 int (*socket_bind)(struct socket *sock, struct sockaddr *address, 1666 int addrlen); 1667 int (*socket_connect)(struct socket *sock, struct sockaddr *address, 1668 int addrlen); 1669 int (*socket_listen)(struct socket *sock, int backlog); 1670 int (*socket_accept)(struct socket *sock, struct socket *newsock); 1671 int (*socket_sendmsg)(struct socket *sock, struct msghdr *msg, 1672 int size); 1673 int (*socket_recvmsg)(struct socket *sock, struct msghdr *msg, 1674 int size, int flags); 1675 int (*socket_getsockname)(struct socket *sock); 1676 int (*socket_getpeername)(struct socket *sock); 1677 int (*socket_getsockopt)(struct socket *sock, int level, int optname); 1678 int (*socket_setsockopt)(struct socket *sock, int level, int optname); 1679 int (*socket_shutdown)(struct socket *sock, int how); 1680 int (*socket_sock_rcv_skb)(struct sock *sk, struct sk_buff *skb); 1681 int (*socket_getpeersec_stream)(struct socket *sock, 1682 char __user *optval, 1683 int __user *optlen, unsigned len); 1684 int (*socket_getpeersec_dgram)(struct socket *sock, 1685 struct sk_buff *skb, u32 *secid); 1686 int (*sk_alloc_security)(struct sock *sk, int family, gfp_t priority); 1687 void (*sk_free_security)(struct sock *sk); 1688 void (*sk_clone_security)(const struct sock *sk, struct sock *newsk); 1689 void (*sk_getsecid)(struct sock *sk, u32 *secid); 1690 void (*sock_graft)(struct sock *sk, struct socket *parent); 1691 int (*inet_conn_request)(struct sock *sk, struct sk_buff *skb, 1692 struct request_sock *req); 1693 void (*inet_csk_clone)(struct sock *newsk, 1694 const struct request_sock *req); 1695 void (*inet_conn_established)(struct sock *sk, struct sk_buff *skb); 1696 int (*secmark_relabel_packet)(u32 secid); 1697 void (*secmark_refcount_inc)(void); 1698 void (*secmark_refcount_dec)(void); 1699 void (*req_classify_flow)(const struct request_sock *req, 1700 struct flowi *fl); 1701 int (*tun_dev_alloc_security)(void **security); 1702 void (*tun_dev_free_security)(void *security); 1703 int (*tun_dev_create)(void); 1704 int (*tun_dev_attach_queue)(void *security); 1705 int (*tun_dev_attach)(struct sock *sk, void *security); 1706 int (*tun_dev_open)(void *security); 1707 int (*sctp_assoc_request)(struct sctp_endpoint *ep, 1708 struct sk_buff *skb); 1709 int (*sctp_bind_connect)(struct sock *sk, int optname, 1710 struct sockaddr *address, int addrlen); 1711 void (*sctp_sk_clone)(struct sctp_endpoint *ep, struct sock *sk, 1712 struct sock *newsk); 1713#endif /* CONFIG_SECURITY_NETWORK */ 1714 1715#ifdef CONFIG_SECURITY_INFINIBAND 1716 int (*ib_pkey_access)(void *sec, u64 subnet_prefix, u16 pkey); 1717 int (*ib_endport_manage_subnet)(void *sec, const char *dev_name, 1718 u8 port_num); 1719 int (*ib_alloc_security)(void **sec); 1720 void (*ib_free_security)(void *sec); 1721#endif /* CONFIG_SECURITY_INFINIBAND */ 1722 1723#ifdef CONFIG_SECURITY_NETWORK_XFRM 1724 int (*xfrm_policy_alloc_security)(struct xfrm_sec_ctx **ctxp, 1725 struct xfrm_user_sec_ctx *sec_ctx, 1726 gfp_t gfp); 1727 int (*xfrm_policy_clone_security)(struct xfrm_sec_ctx *old_ctx, 1728 struct xfrm_sec_ctx **new_ctx); 1729 void (*xfrm_policy_free_security)(struct xfrm_sec_ctx *ctx); 1730 int (*xfrm_policy_delete_security)(struct xfrm_sec_ctx *ctx); 1731 int (*xfrm_state_alloc)(struct xfrm_state *x, 1732 struct xfrm_user_sec_ctx *sec_ctx); 1733 int (*xfrm_state_alloc_acquire)(struct xfrm_state *x, 1734 struct xfrm_sec_ctx *polsec, 1735 u32 secid); 1736 void (*xfrm_state_free_security)(struct xfrm_state *x); 1737 int (*xfrm_state_delete_security)(struct xfrm_state *x); 1738 int (*xfrm_policy_lookup)(struct xfrm_sec_ctx *ctx, u32 fl_secid, 1739 u8 dir); 1740 int (*xfrm_state_pol_flow_match)(struct xfrm_state *x, 1741 struct xfrm_policy *xp, 1742 const struct flowi *fl); 1743 int (*xfrm_decode_session)(struct sk_buff *skb, u32 *secid, int ckall); 1744#endif /* CONFIG_SECURITY_NETWORK_XFRM */ 1745 1746 /* key management security hooks */ 1747#ifdef CONFIG_KEYS 1748 int (*key_alloc)(struct key *key, const struct cred *cred, 1749 unsigned long flags); 1750 void (*key_free)(struct key *key); 1751 int (*key_permission)(key_ref_t key_ref, const struct cred *cred, 1752 unsigned perm); 1753 int (*key_getsecurity)(struct key *key, char **_buffer); 1754#endif /* CONFIG_KEYS */ 1755 1756#ifdef CONFIG_AUDIT 1757 int (*audit_rule_init)(u32 field, u32 op, char *rulestr, 1758 void **lsmrule); 1759 int (*audit_rule_known)(struct audit_krule *krule); 1760 int (*audit_rule_match)(u32 secid, u32 field, u32 op, void *lsmrule, 1761 struct audit_context *actx); 1762 void (*audit_rule_free)(void *lsmrule); 1763#endif /* CONFIG_AUDIT */ 1764 1765#ifdef CONFIG_BPF_SYSCALL 1766 int (*bpf)(int cmd, union bpf_attr *attr, 1767 unsigned int size); 1768 int (*bpf_map)(struct bpf_map *map, fmode_t fmode); 1769 int (*bpf_prog)(struct bpf_prog *prog); 1770 int (*bpf_map_alloc_security)(struct bpf_map *map); 1771 void (*bpf_map_free_security)(struct bpf_map *map); 1772 int (*bpf_prog_alloc_security)(struct bpf_prog_aux *aux); 1773 void (*bpf_prog_free_security)(struct bpf_prog_aux *aux); 1774#endif /* CONFIG_BPF_SYSCALL */ 1775}; 1776 1777struct security_hook_heads { 1778 struct hlist_head binder_set_context_mgr; 1779 struct hlist_head binder_transaction; 1780 struct hlist_head binder_transfer_binder; 1781 struct hlist_head binder_transfer_file; 1782 struct hlist_head ptrace_access_check; 1783 struct hlist_head ptrace_traceme; 1784 struct hlist_head capget; 1785 struct hlist_head capset; 1786 struct hlist_head capable; 1787 struct hlist_head quotactl; 1788 struct hlist_head quota_on; 1789 struct hlist_head syslog; 1790 struct hlist_head settime; 1791 struct hlist_head vm_enough_memory; 1792 struct hlist_head bprm_set_creds; 1793 struct hlist_head bprm_check_security; 1794 struct hlist_head bprm_committing_creds; 1795 struct hlist_head bprm_committed_creds; 1796 struct hlist_head sb_alloc_security; 1797 struct hlist_head sb_free_security; 1798 struct hlist_head sb_copy_data; 1799 struct hlist_head sb_remount; 1800 struct hlist_head sb_kern_mount; 1801 struct hlist_head sb_show_options; 1802 struct hlist_head sb_statfs; 1803 struct hlist_head sb_mount; 1804 struct hlist_head sb_umount; 1805 struct hlist_head sb_pivotroot; 1806 struct hlist_head sb_set_mnt_opts; 1807 struct hlist_head sb_clone_mnt_opts; 1808 struct hlist_head sb_parse_opts_str; 1809 struct hlist_head dentry_init_security; 1810 struct hlist_head dentry_create_files_as; 1811#ifdef CONFIG_SECURITY_PATH 1812 struct hlist_head path_unlink; 1813 struct hlist_head path_mkdir; 1814 struct hlist_head path_rmdir; 1815 struct hlist_head path_mknod; 1816 struct hlist_head path_truncate; 1817 struct hlist_head path_symlink; 1818 struct hlist_head path_link; 1819 struct hlist_head path_rename; 1820 struct hlist_head path_chmod; 1821 struct hlist_head path_chown; 1822 struct hlist_head path_chroot; 1823#endif 1824 struct hlist_head inode_alloc_security; 1825 struct hlist_head inode_free_security; 1826 struct hlist_head inode_init_security; 1827 struct hlist_head inode_create; 1828 struct hlist_head inode_link; 1829 struct hlist_head inode_unlink; 1830 struct hlist_head inode_symlink; 1831 struct hlist_head inode_mkdir; 1832 struct hlist_head inode_rmdir; 1833 struct hlist_head inode_mknod; 1834 struct hlist_head inode_rename; 1835 struct hlist_head inode_readlink; 1836 struct hlist_head inode_follow_link; 1837 struct hlist_head inode_permission; 1838 struct hlist_head inode_setattr; 1839 struct hlist_head inode_getattr; 1840 struct hlist_head inode_setxattr; 1841 struct hlist_head inode_post_setxattr; 1842 struct hlist_head inode_getxattr; 1843 struct hlist_head inode_listxattr; 1844 struct hlist_head inode_removexattr; 1845 struct hlist_head inode_need_killpriv; 1846 struct hlist_head inode_killpriv; 1847 struct hlist_head inode_getsecurity; 1848 struct hlist_head inode_setsecurity; 1849 struct hlist_head inode_listsecurity; 1850 struct hlist_head inode_getsecid; 1851 struct hlist_head inode_copy_up; 1852 struct hlist_head inode_copy_up_xattr; 1853 struct hlist_head file_permission; 1854 struct hlist_head file_alloc_security; 1855 struct hlist_head file_free_security; 1856 struct hlist_head file_ioctl; 1857 struct hlist_head mmap_addr; 1858 struct hlist_head mmap_file; 1859 struct hlist_head file_mprotect; 1860 struct hlist_head file_lock; 1861 struct hlist_head file_fcntl; 1862 struct hlist_head file_set_fowner; 1863 struct hlist_head file_send_sigiotask; 1864 struct hlist_head file_receive; 1865 struct hlist_head file_open; 1866 struct hlist_head task_alloc; 1867 struct hlist_head task_free; 1868 struct hlist_head cred_alloc_blank; 1869 struct hlist_head cred_free; 1870 struct hlist_head cred_prepare; 1871 struct hlist_head cred_transfer; 1872 struct hlist_head cred_getsecid; 1873 struct hlist_head kernel_act_as; 1874 struct hlist_head kernel_create_files_as; 1875 struct hlist_head kernel_read_file; 1876 struct hlist_head kernel_post_read_file; 1877 struct hlist_head kernel_module_request; 1878 struct hlist_head task_fix_setuid; 1879 struct hlist_head task_setpgid; 1880 struct hlist_head task_getpgid; 1881 struct hlist_head task_getsid; 1882 struct hlist_head task_getsecid; 1883 struct hlist_head task_setnice; 1884 struct hlist_head task_setioprio; 1885 struct hlist_head task_getioprio; 1886 struct hlist_head task_prlimit; 1887 struct hlist_head task_setrlimit; 1888 struct hlist_head task_setscheduler; 1889 struct hlist_head task_getscheduler; 1890 struct hlist_head task_movememory; 1891 struct hlist_head task_kill; 1892 struct hlist_head task_prctl; 1893 struct hlist_head task_to_inode; 1894 struct hlist_head ipc_permission; 1895 struct hlist_head ipc_getsecid; 1896 struct hlist_head msg_msg_alloc_security; 1897 struct hlist_head msg_msg_free_security; 1898 struct hlist_head msg_queue_alloc_security; 1899 struct hlist_head msg_queue_free_security; 1900 struct hlist_head msg_queue_associate; 1901 struct hlist_head msg_queue_msgctl; 1902 struct hlist_head msg_queue_msgsnd; 1903 struct hlist_head msg_queue_msgrcv; 1904 struct hlist_head shm_alloc_security; 1905 struct hlist_head shm_free_security; 1906 struct hlist_head shm_associate; 1907 struct hlist_head shm_shmctl; 1908 struct hlist_head shm_shmat; 1909 struct hlist_head sem_alloc_security; 1910 struct hlist_head sem_free_security; 1911 struct hlist_head sem_associate; 1912 struct hlist_head sem_semctl; 1913 struct hlist_head sem_semop; 1914 struct hlist_head netlink_send; 1915 struct hlist_head d_instantiate; 1916 struct hlist_head getprocattr; 1917 struct hlist_head setprocattr; 1918 struct hlist_head ismaclabel; 1919 struct hlist_head secid_to_secctx; 1920 struct hlist_head secctx_to_secid; 1921 struct hlist_head release_secctx; 1922 struct hlist_head inode_invalidate_secctx; 1923 struct hlist_head inode_notifysecctx; 1924 struct hlist_head inode_setsecctx; 1925 struct hlist_head inode_getsecctx; 1926#ifdef CONFIG_SECURITY_NETWORK 1927 struct hlist_head unix_stream_connect; 1928 struct hlist_head unix_may_send; 1929 struct hlist_head socket_create; 1930 struct hlist_head socket_post_create; 1931 struct hlist_head socket_socketpair; 1932 struct hlist_head socket_bind; 1933 struct hlist_head socket_connect; 1934 struct hlist_head socket_listen; 1935 struct hlist_head socket_accept; 1936 struct hlist_head socket_sendmsg; 1937 struct hlist_head socket_recvmsg; 1938 struct hlist_head socket_getsockname; 1939 struct hlist_head socket_getpeername; 1940 struct hlist_head socket_getsockopt; 1941 struct hlist_head socket_setsockopt; 1942 struct hlist_head socket_shutdown; 1943 struct hlist_head socket_sock_rcv_skb; 1944 struct hlist_head socket_getpeersec_stream; 1945 struct hlist_head socket_getpeersec_dgram; 1946 struct hlist_head sk_alloc_security; 1947 struct hlist_head sk_free_security; 1948 struct hlist_head sk_clone_security; 1949 struct hlist_head sk_getsecid; 1950 struct hlist_head sock_graft; 1951 struct hlist_head inet_conn_request; 1952 struct hlist_head inet_csk_clone; 1953 struct hlist_head inet_conn_established; 1954 struct hlist_head secmark_relabel_packet; 1955 struct hlist_head secmark_refcount_inc; 1956 struct hlist_head secmark_refcount_dec; 1957 struct hlist_head req_classify_flow; 1958 struct hlist_head tun_dev_alloc_security; 1959 struct hlist_head tun_dev_free_security; 1960 struct hlist_head tun_dev_create; 1961 struct hlist_head tun_dev_attach_queue; 1962 struct hlist_head tun_dev_attach; 1963 struct hlist_head tun_dev_open; 1964 struct hlist_head sctp_assoc_request; 1965 struct hlist_head sctp_bind_connect; 1966 struct hlist_head sctp_sk_clone; 1967#endif /* CONFIG_SECURITY_NETWORK */ 1968#ifdef CONFIG_SECURITY_INFINIBAND 1969 struct hlist_head ib_pkey_access; 1970 struct hlist_head ib_endport_manage_subnet; 1971 struct hlist_head ib_alloc_security; 1972 struct hlist_head ib_free_security; 1973#endif /* CONFIG_SECURITY_INFINIBAND */ 1974#ifdef CONFIG_SECURITY_NETWORK_XFRM 1975 struct hlist_head xfrm_policy_alloc_security; 1976 struct hlist_head xfrm_policy_clone_security; 1977 struct hlist_head xfrm_policy_free_security; 1978 struct hlist_head xfrm_policy_delete_security; 1979 struct hlist_head xfrm_state_alloc; 1980 struct hlist_head xfrm_state_alloc_acquire; 1981 struct hlist_head xfrm_state_free_security; 1982 struct hlist_head xfrm_state_delete_security; 1983 struct hlist_head xfrm_policy_lookup; 1984 struct hlist_head xfrm_state_pol_flow_match; 1985 struct hlist_head xfrm_decode_session; 1986#endif /* CONFIG_SECURITY_NETWORK_XFRM */ 1987#ifdef CONFIG_KEYS 1988 struct hlist_head key_alloc; 1989 struct hlist_head key_free; 1990 struct hlist_head key_permission; 1991 struct hlist_head key_getsecurity; 1992#endif /* CONFIG_KEYS */ 1993#ifdef CONFIG_AUDIT 1994 struct hlist_head audit_rule_init; 1995 struct hlist_head audit_rule_known; 1996 struct hlist_head audit_rule_match; 1997 struct hlist_head audit_rule_free; 1998#endif /* CONFIG_AUDIT */ 1999#ifdef CONFIG_BPF_SYSCALL 2000 struct hlist_head bpf;
2001 struct hlist_head bpf_map; 2002 struct hlist_head bpf_prog; 2003 struct hlist_head bpf_map_alloc_security; 2004 struct hlist_head bpf_map_free_security; 2005 struct hlist_head bpf_prog_alloc_security; 2006 struct hlist_head bpf_prog_free_security; 2007#endif /* CONFIG_BPF_SYSCALL */ 2008} __randomize_layout; 2009 2010/* 2011 * Security module hook list structure. 2012 * For use with generic list macros for common operations. 2013 */ 2014struct security_hook_list { 2015 struct hlist_node list; 2016 struct hlist_head *head; 2017 union security_list_options hook; 2018 char *lsm; 2019} __randomize_layout; 2020 2021/* 2022 * Initializing a security_hook_list structure takes 2023 * up a lot of space in a source file. This macro takes 2024 * care of the common case and reduces the amount of 2025 * text involved. 2026 */ 2027#define LSM_HOOK_INIT(HEAD, HOOK) \ 2028 { .head = &security_hook_heads.HEAD, .hook = { .HEAD = HOOK } } 2029 2030extern struct security_hook_heads security_hook_heads; 2031extern char *lsm_names; 2032 2033extern void security_add_hooks(struct security_hook_list *hooks, int count, 2034 char *lsm); 2035 2036#ifdef CONFIG_SECURITY_SELINUX_DISABLE 2037/* 2038 * Assuring the safety of deleting a security module is up to 2039 * the security module involved. This may entail ordering the 2040 * module's hook list in a particular way, refusing to disable 2041 * the module once a policy is loaded or any number of other 2042 * actions better imagined than described. 2043 * 2044 * The name of the configuration option reflects the only module 2045 * that currently uses the mechanism. Any developer who thinks 2046 * disabling their module is a good idea needs to be at least as 2047 * careful as the SELinux team. 2048 */ 2049static inline void security_delete_hooks(struct security_hook_list *hooks, 2050 int count) 2051{ 2052 int i; 2053 2054 for (i = 0; i < count; i++) 2055 hlist_del_rcu(&hooks[i].list); 2056} 2057#endif /* CONFIG_SECURITY_SELINUX_DISABLE */ 2058 2059/* Currently required to handle SELinux runtime hook disable. */ 2060#ifdef CONFIG_SECURITY_WRITABLE_HOOKS 2061#define __lsm_ro_after_init 2062#else 2063#define __lsm_ro_after_init __ro_after_init 2064#endif /* CONFIG_SECURITY_WRITABLE_HOOKS */ 2065 2066extern int __init security_module_enable(const char *module); 2067extern void __init capability_add_hooks(void); 2068#ifdef CONFIG_SECURITY_YAMA 2069extern void __init yama_add_hooks(void); 2070#else 2071static inline void __init yama_add_hooks(void) { } 2072#endif 2073#ifdef CONFIG_SECURITY_LOADPIN 2074void __init loadpin_add_hooks(void); 2075#else 2076static inline void loadpin_add_hooks(void) { }; 2077#endif 2078 2079#endif /* ! __LINUX_LSM_HOOKS_H */ 2080