linux/include/scsi/srp.h
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2005 Cisco Systems.  All rights reserved.
   3 *
   4 * This software is available to you under a choice of one of two
   5 * licenses.  You may choose to be licensed under the terms of the GNU
   6 * General Public License (GPL) Version 2, available from the file
   7 * COPYING in the main directory of this source tree, or the
   8 * OpenIB.org BSD license below:
   9 *
  10 *     Redistribution and use in source and binary forms, with or
  11 *     without modification, are permitted provided that the following
  12 *     conditions are met:
  13 *
  14 *      - Redistributions of source code must retain the above
  15 *        copyright notice, this list of conditions and the following
  16 *        disclaimer.
  17 *
  18 *      - Redistributions in binary form must reproduce the above
  19 *        copyright notice, this list of conditions and the following
  20 *        disclaimer in the documentation and/or other materials
  21 *        provided with the distribution.
  22 *
  23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  30 * SOFTWARE.
  31 *
  32 * $Id$
  33 */
  34
  35#ifndef SCSI_SRP_H
  36#define SCSI_SRP_H
  37
  38/*
  39 * Structures and constants for the SCSI RDMA Protocol (SRP) as
  40 * defined by the INCITS T10 committee.  This file was written using
  41 * draft Revision 16a of the SRP standard.
  42 */
  43
  44#include <linux/types.h>
  45#include <scsi/scsi.h>
  46
  47enum {
  48        SRP_LOGIN_REQ   = 0x00,
  49        SRP_TSK_MGMT    = 0x01,
  50        SRP_CMD         = 0x02,
  51        SRP_I_LOGOUT    = 0x03,
  52        SRP_LOGIN_RSP   = 0xc0,
  53        SRP_RSP         = 0xc1,
  54        SRP_LOGIN_REJ   = 0xc2,
  55        SRP_T_LOGOUT    = 0x80,
  56        SRP_CRED_REQ    = 0x81,
  57        SRP_AER_REQ     = 0x82,
  58        SRP_CRED_RSP    = 0x41,
  59        SRP_AER_RSP     = 0x42
  60};
  61
  62enum {
  63        SRP_BUF_FORMAT_DIRECT   = 1 << 1,
  64        SRP_BUF_FORMAT_INDIRECT = 1 << 2
  65};
  66
  67enum {
  68        SRP_NO_DATA_DESC        = 0,
  69        SRP_DATA_DESC_DIRECT    = 1,
  70        SRP_DATA_DESC_INDIRECT  = 2
  71};
  72
  73enum {
  74        SRP_TSK_ABORT_TASK      = 0x01,
  75        SRP_TSK_ABORT_TASK_SET  = 0x02,
  76        SRP_TSK_CLEAR_TASK_SET  = 0x04,
  77        SRP_TSK_LUN_RESET       = 0x08,
  78        SRP_TSK_CLEAR_ACA       = 0x40
  79};
  80
  81enum srp_login_rej_reason {
  82        SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL          = 0x00010000,
  83        SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES            = 0x00010001,
  84        SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE        = 0x00010002,
  85        SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL          = 0x00010003,
  86        SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT        = 0x00010004,
  87        SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED         = 0x00010005,
  88        SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED             = 0x00010006
  89};
  90
  91enum {
  92        SRP_REV10_IB_IO_CLASS   = 0xff00,
  93        SRP_REV16A_IB_IO_CLASS  = 0x0100
  94};
  95
  96struct srp_direct_buf {
  97        __be64  va;
  98        __be32  key;
  99        __be32  len;
 100};
 101
 102/*
 103 * We need the packed attribute because the SRP spec puts the list of
 104 * descriptors at an offset of 20, which is not aligned to the size of
 105 * struct srp_direct_buf.  The whole structure must be packed to avoid
 106 * having the 20-byte structure padded to 24 bytes on 64-bit architectures.
 107 */
 108struct srp_indirect_buf {
 109        struct srp_direct_buf   table_desc;
 110        __be32                  len;
 111        struct srp_direct_buf   desc_list[0];
 112} __attribute__((packed));
 113
 114enum {
 115        SRP_MULTICHAN_SINGLE = 0,
 116        SRP_MULTICHAN_MULTI  = 1
 117};
 118
 119struct srp_login_req {
 120        u8      opcode;
 121        u8      reserved1[7];
 122        u64     tag;
 123        __be32  req_it_iu_len;
 124        u8      reserved2[4];
 125        __be16  req_buf_fmt;
 126        u8      req_flags;
 127        u8      reserved3[5];
 128        u8      initiator_port_id[16];
 129        u8      target_port_id[16];
 130};
 131
 132/**
 133 * struct srp_login_req_rdma - RDMA/CM login parameters.
 134 *
 135 * RDMA/CM over InfiniBand can only carry 92 - 36 = 56 bytes of private
 136 * data. The %srp_login_req_rdma structure contains the same information as
 137 * %srp_login_req but with the reserved data removed.
 138 */
 139struct srp_login_req_rdma {
 140        u64     tag;
 141        __be16  req_buf_fmt;
 142        u8      req_flags;
 143        u8      opcode;
 144        __be32  req_it_iu_len;
 145        u8      initiator_port_id[16];
 146        u8      target_port_id[16];
 147};
 148
 149/*
 150 * The SRP spec defines the size of the LOGIN_RSP structure to be 52
 151 * bytes, so it needs to be packed to avoid having it padded to 56
 152 * bytes on 64-bit architectures.
 153 */
 154struct srp_login_rsp {
 155        u8      opcode;
 156        u8      reserved1[3];
 157        __be32  req_lim_delta;
 158        u64     tag;
 159        __be32  max_it_iu_len;
 160        __be32  max_ti_iu_len;
 161        __be16  buf_fmt;
 162        u8      rsp_flags;
 163        u8      reserved2[25];
 164} __attribute__((packed));
 165
 166struct srp_login_rej {
 167        u8      opcode;
 168        u8      reserved1[3];
 169        __be32  reason;
 170        u64     tag;
 171        u8      reserved2[8];
 172        __be16  buf_fmt;
 173        u8      reserved3[6];
 174};
 175
 176struct srp_i_logout {
 177        u8      opcode;
 178        u8      reserved[7];
 179        u64     tag;
 180};
 181
 182struct srp_t_logout {
 183        u8      opcode;
 184        u8      sol_not;
 185        u8      reserved[2];
 186        __be32  reason;
 187        u64     tag;
 188};
 189
 190/*
 191 * We need the packed attribute because the SRP spec only aligns the
 192 * 8-byte LUN field to 4 bytes.
 193 */
 194struct srp_tsk_mgmt {
 195        u8      opcode;
 196        u8      sol_not;
 197        u8      reserved1[6];
 198        u64     tag;
 199        u8      reserved2[4];
 200        struct scsi_lun lun;
 201        u8      reserved3[2];
 202        u8      tsk_mgmt_func;
 203        u8      reserved4;
 204        u64     task_tag;
 205        u8      reserved5[8];
 206};
 207
 208/*
 209 * We need the packed attribute because the SRP spec only aligns the
 210 * 8-byte LUN field to 4 bytes.
 211 */
 212struct srp_cmd {
 213        u8      opcode;
 214        u8      sol_not;
 215        u8      reserved1[3];
 216        u8      buf_fmt;
 217        u8      data_out_desc_cnt;
 218        u8      data_in_desc_cnt;
 219        u64     tag;
 220        u8      reserved2[4];
 221        struct scsi_lun lun;
 222        u8      reserved3;
 223        u8      task_attr;
 224        u8      reserved4;
 225        u8      add_cdb_len;
 226        u8      cdb[16];
 227        u8      add_data[0];
 228};
 229
 230enum {
 231        SRP_RSP_FLAG_RSPVALID = 1 << 0,
 232        SRP_RSP_FLAG_SNSVALID = 1 << 1,
 233        SRP_RSP_FLAG_DOOVER   = 1 << 2,
 234        SRP_RSP_FLAG_DOUNDER  = 1 << 3,
 235        SRP_RSP_FLAG_DIOVER   = 1 << 4,
 236        SRP_RSP_FLAG_DIUNDER  = 1 << 5
 237};
 238
 239/*
 240 * The SRP spec defines the size of the RSP structure to be 36 bytes,
 241 * so it needs to be packed to avoid having it padded to 40 bytes on
 242 * 64-bit architectures.
 243 */
 244struct srp_rsp {
 245        u8      opcode;
 246        u8      sol_not;
 247        u8      reserved1[2];
 248        __be32  req_lim_delta;
 249        u64     tag;
 250        u8      reserved2[2];
 251        u8      flags;
 252        u8      status;
 253        __be32  data_out_res_cnt;
 254        __be32  data_in_res_cnt;
 255        __be32  sense_data_len;
 256        __be32  resp_data_len;
 257        u8      data[0];
 258} __attribute__((packed));
 259
 260struct srp_cred_req {
 261        u8      opcode;
 262        u8      sol_not;
 263        u8      reserved[2];
 264        __be32  req_lim_delta;
 265        u64     tag;
 266};
 267
 268struct srp_cred_rsp {
 269        u8      opcode;
 270        u8      reserved[7];
 271        u64     tag;
 272};
 273
 274/*
 275 * The SRP spec defines the fixed portion of the AER_REQ structure to be
 276 * 36 bytes, so it needs to be packed to avoid having it padded to 40 bytes
 277 * on 64-bit architectures.
 278 */
 279struct srp_aer_req {
 280        u8      opcode;
 281        u8      sol_not;
 282        u8      reserved[2];
 283        __be32  req_lim_delta;
 284        u64     tag;
 285        u32     reserved2;
 286        struct scsi_lun lun;
 287        __be32  sense_data_len;
 288        u32     reserved3;
 289        u8      sense_data[0];
 290} __attribute__((packed));
 291
 292struct srp_aer_rsp {
 293        u8      opcode;
 294        u8      reserved[7];
 295        u64     tag;
 296};
 297
 298#endif /* SCSI_SRP_H */
 299