linux/arch/arm/mach-pxa/trizeps4.c
<<
>>
Prefs
   1/*
   2 *  linux/arch/arm/mach-pxa/trizeps4.c
   3 *
   4 *  Support for the Keith und Koep Trizeps4 Module Platform.
   5 *
   6 *  Author:     Jürgen Schindele
   7 *  Created:    20 02, 2006
   8 *  Copyright:  Jürgen Schindele
   9 *
  10 *  This program is free software; you can redistribute it and/or modify
  11 *  it under the terms of the GNU General Public License version 2 as
  12 *  published by the Free Software Foundation.
  13 */
  14
  15#include <linux/init.h>
  16#include <linux/kernel.h>
  17#include <linux/platform_device.h>
  18#include <linux/interrupt.h>
  19#include <linux/leds.h>
  20#include <linux/export.h>
  21#include <linux/sched.h>
  22#include <linux/bitops.h>
  23#include <linux/fb.h>
  24#include <linux/ioport.h>
  25#include <linux/delay.h>
  26#include <linux/gpio.h>
  27#include <linux/dm9000.h>
  28#include <linux/mtd/physmap.h>
  29#include <linux/mtd/partitions.h>
  30#include <linux/regulator/machine.h>
  31#include <linux/platform_data/i2c-pxa.h>
  32
  33#include <asm/types.h>
  34#include <asm/setup.h>
  35#include <asm/memory.h>
  36#include <asm/mach-types.h>
  37#include <asm/irq.h>
  38#include <asm/sizes.h>
  39
  40#include <asm/mach/arch.h>
  41#include <asm/mach/map.h>
  42#include <asm/mach/irq.h>
  43#include <asm/mach/flash.h>
  44
  45#include "pxa27x.h"
  46#include <mach/trizeps4.h>
  47#include <mach/audio.h>
  48#include <linux/platform_data/video-pxafb.h>
  49#include <linux/platform_data/mmc-pxamci.h>
  50#include <linux/platform_data/irda-pxaficp.h>
  51#include <linux/platform_data/usb-ohci-pxa27x.h>
  52#include <mach/smemc.h>
  53
  54#include "generic.h"
  55#include "devices.h"
  56
  57/*      comment out the following line if you want to use the
  58 *      Standard UART from PXA for serial / irda transmission
  59 *      and acivate it if you have status leds connected */
  60#define STATUS_LEDS_ON_STUART_PINS 1
  61
  62/*****************************************************************************
  63 * MultiFunctionPins of CPU
  64 *****************************************************************************/
  65static unsigned long trizeps4_pin_config[] __initdata = {
  66        /* Chip Selects */
  67        GPIO15_nCS_1,           /* DiskOnChip CS */
  68        GPIO93_GPIO,            /* TRIZEPS4_DOC_IRQ */
  69        GPIO94_GPIO,            /* DOC lock */
  70
  71        GPIO78_nCS_2,           /* DM9000 CS */
  72        GPIO101_GPIO,           /* TRIZEPS4_ETH_IRQ */
  73
  74        GPIO79_nCS_3,           /* Logic CS */
  75        GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,       /* Logic irq */
  76
  77        /* AC97 */
  78        GPIO28_AC97_BITCLK,
  79        GPIO29_AC97_SDATA_IN_0,
  80        GPIO30_AC97_SDATA_OUT,
  81        GPIO31_AC97_SYNC,
  82
  83        /* LCD - 16bpp Active TFT */
  84        GPIOxx_LCD_TFT_16BPP,
  85
  86        /* UART */
  87        GPIO9_FFUART_CTS,
  88        GPIO10_FFUART_DCD,
  89        GPIO16_FFUART_TXD,
  90        GPIO33_FFUART_DSR,
  91        GPIO38_FFUART_RI,
  92        GPIO82_FFUART_DTR,
  93        GPIO83_FFUART_RTS,
  94        GPIO96_FFUART_RXD,
  95
  96        GPIO42_BTUART_RXD,
  97        GPIO43_BTUART_TXD,
  98        GPIO44_BTUART_CTS,
  99        GPIO45_BTUART_RTS,
 100#ifdef STATUS_LEDS_ON_STUART_PINS
 101        GPIO46_GPIO,
 102        GPIO47_GPIO,
 103#else
 104        GPIO46_STUART_RXD,
 105        GPIO47_STUART_TXD,
 106#endif
 107        /* PCMCIA */
 108        GPIO11_GPIO,                    /* TRIZEPS4_CD_IRQ */
 109        GPIO13_GPIO,                    /* TRIZEPS4_READY_NINT */
 110        GPIO48_nPOE,
 111        GPIO49_nPWE,
 112        GPIO50_nPIOR,
 113        GPIO51_nPIOW,
 114        GPIO54_nPCE_2,
 115        GPIO55_nPREG,
 116        GPIO56_nPWAIT,
 117        GPIO57_nIOIS16,
 118        GPIO102_nPCE_1,
 119        GPIO104_PSKTSEL,
 120
 121        /* MultiMediaCard */
 122        GPIO32_MMC_CLK,
 123        GPIO92_MMC_DAT_0,
 124        GPIO109_MMC_DAT_1,
 125        GPIO110_MMC_DAT_2,
 126        GPIO111_MMC_DAT_3,
 127        GPIO112_MMC_CMD,
 128        GPIO12_GPIO,                    /* TRIZEPS4_MMC_IRQ */
 129
 130        /* USB OHCI */
 131        GPIO88_USBH1_PWR,               /* USBHPWR1 */
 132        GPIO89_USBH1_PEN,               /* USBHPEN1 */
 133
 134        /* I2C */
 135        GPIO117_I2C_SCL,
 136        GPIO118_I2C_SDA,
 137};
 138
 139static unsigned long trizeps4wl_pin_config[] __initdata = {
 140        /* SSP 2 */
 141        GPIO14_SSP2_SFRM,
 142        GPIO19_SSP2_SCLK,
 143        GPIO53_GPIO,                    /* TRIZEPS4_SPI_IRQ */
 144        GPIO86_SSP2_RXD,
 145        GPIO87_SSP2_TXD,
 146};
 147
 148/****************************************************************************
 149 * ONBOARD FLASH
 150 ****************************************************************************/
 151static struct mtd_partition trizeps4_partitions[] = {
 152        {
 153                .name =         "Bootloader",
 154                .offset =       0x00000000,
 155                .size =         0x00040000,
 156                .mask_flags =   MTD_WRITEABLE  /* force read-only */
 157        }, {
 158                .name =         "Backup",
 159                .offset =       0x00040000,
 160                .size =         0x00040000,
 161        }, {
 162                .name =         "Image",
 163                .offset =       0x00080000,
 164                .size =         0x01080000,
 165        }, {
 166                .name =         "IPSM",
 167                .offset =       0x01100000,
 168                .size =         0x00e00000,
 169        }, {
 170                .name =         "Registry",
 171                .offset =       0x01f00000,
 172                .size =         MTDPART_SIZ_FULL,
 173        }
 174};
 175
 176static struct physmap_flash_data trizeps4_flash_data[] = {
 177        {
 178                .width          = 4,                    /* bankwidth in bytes */
 179                .parts          = trizeps4_partitions,
 180                .nr_parts       = ARRAY_SIZE(trizeps4_partitions)
 181        }
 182};
 183
 184static struct resource flash_resource = {
 185        .start  = PXA_CS0_PHYS,
 186        .end    = PXA_CS0_PHYS + SZ_32M - 1,
 187        .flags  = IORESOURCE_MEM,
 188};
 189
 190static struct platform_device flash_device = {
 191        .name           = "physmap-flash",
 192        .id             = 0,
 193        .dev = {
 194                .platform_data = trizeps4_flash_data,
 195        },
 196        .resource = &flash_resource,
 197        .num_resources = 1,
 198};
 199
 200/****************************************************************************
 201 * DAVICOM DM9000 Ethernet
 202 ****************************************************************************/
 203static struct resource dm9000_resources[] = {
 204        [0] = {
 205                .start  = TRIZEPS4_ETH_PHYS+0x300,
 206                .end    = TRIZEPS4_ETH_PHYS+0x400-1,
 207                .flags  = IORESOURCE_MEM,
 208        },
 209        [1] = {
 210                .start  = TRIZEPS4_ETH_PHYS+0x8300,
 211                .end    = TRIZEPS4_ETH_PHYS+0x8400-1,
 212                .flags  = IORESOURCE_MEM,
 213        },
 214        [2] = {
 215                .start  = TRIZEPS4_ETH_IRQ,
 216                .end    = TRIZEPS4_ETH_IRQ,
 217                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 218        },
 219};
 220
 221static struct dm9000_plat_data tri_dm9000_platdata = {
 222        .flags          = DM9000_PLATF_32BITONLY,
 223};
 224
 225static struct platform_device dm9000_device = {
 226        .name           = "dm9000",
 227        .id             = -1,
 228        .num_resources  = ARRAY_SIZE(dm9000_resources),
 229        .resource       = dm9000_resources,
 230        .dev            = {
 231                .platform_data = &tri_dm9000_platdata,
 232        }
 233};
 234
 235/****************************************************************************
 236 * LED's on GPIO pins of PXA
 237 ****************************************************************************/
 238static struct gpio_led trizeps4_led[] = {
 239#ifdef STATUS_LEDS_ON_STUART_PINS
 240        {
 241                .name = "led0:orange:heartbeat",        /* */
 242                .default_trigger = "heartbeat",
 243                .gpio = GPIO_HEARTBEAT_LED,
 244                .active_low = 1,
 245        },
 246        {
 247                .name = "led1:yellow:cpubusy",          /* */
 248                .default_trigger = "cpu-busy",
 249                .gpio = GPIO_SYS_BUSY_LED,
 250                .active_low = 1,
 251        },
 252#endif
 253};
 254
 255static struct gpio_led_platform_data trizeps4_led_data = {
 256        .leds           = trizeps4_led,
 257        .num_leds       = ARRAY_SIZE(trizeps4_led),
 258};
 259
 260static struct platform_device leds_devices = {
 261        .name           = "leds-gpio",
 262        .id             = -1,
 263        .dev            = {
 264                .platform_data  = &trizeps4_led_data,
 265        },
 266};
 267
 268static struct platform_device *trizeps4_devices[] __initdata = {
 269        &flash_device,
 270        &dm9000_device,
 271        &leds_devices,
 272};
 273
 274static struct platform_device *trizeps4wl_devices[] __initdata = {
 275        &flash_device,
 276        &leds_devices,
 277};
 278
 279static short trizeps_conxs_bcr;
 280
 281/* PCCARD power switching supports only 3,3V */
 282void board_pcmcia_power(int power)
 283{
 284        if (power) {
 285                /* switch power on, put in reset and enable buffers */
 286                trizeps_conxs_bcr |= power;
 287                trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 288                trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
 289                BCR_writew(trizeps_conxs_bcr);
 290                /* wait a little */
 291                udelay(2000);
 292                /* take reset away */
 293                trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
 294                BCR_writew(trizeps_conxs_bcr);
 295                udelay(2000);
 296        } else {
 297                /* put in reset */
 298                trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 299                BCR_writew(trizeps_conxs_bcr);
 300                udelay(1000);
 301                /* switch power off */
 302                trizeps_conxs_bcr &= ~0xf;
 303                BCR_writew(trizeps_conxs_bcr);
 304        }
 305        pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
 306                        trizeps_conxs_bcr);
 307}
 308EXPORT_SYMBOL(board_pcmcia_power);
 309
 310/* backlight power switching for LCD panel */
 311static void board_backlight_power(int on)
 312{
 313        if (on)
 314                trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
 315        else
 316                trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
 317
 318        pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
 319                        trizeps_conxs_bcr);
 320        BCR_writew(trizeps_conxs_bcr);
 321}
 322
 323/* a I2C based RTC is known on CONXS board */
 324static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
 325        { I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
 326};
 327
 328/****************************************************************************
 329 * MMC card slot external to module
 330 ****************************************************************************/
 331static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 332                void *data)
 333{
 334        int err;
 335
 336        err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
 337                          IRQF_TRIGGER_RISING, "MMC card detect", data);
 338        if (err) {
 339                printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
 340                                                "MMC card detect IRQ\n");
 341                return -1;
 342        }
 343        return 0;
 344}
 345
 346static void trizeps4_mci_exit(struct device *dev, void *data)
 347{
 348        free_irq(TRIZEPS4_MMC_IRQ, data);
 349}
 350
 351static struct pxamci_platform_data trizeps4_mci_platform_data = {
 352        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 353        .detect_delay_ms= 10,
 354        .init           = trizeps4_mci_init,
 355        .exit           = trizeps4_mci_exit,
 356        .get_ro         = NULL, /* write-protection not supported */
 357        .setpower       = NULL, /* power-switching not supported */
 358        .gpio_card_detect = -1,
 359        .gpio_card_ro   = -1,
 360        .gpio_power     = -1,
 361};
 362
 363/****************************************************************************
 364 * IRDA mode switching on stuart
 365 ****************************************************************************/
 366#ifndef STATUS_LEDS_ON_STUART_PINS
 367static short trizeps_conxs_ircr;
 368
 369static int trizeps4_irda_startup(struct device *dev)
 370{
 371        trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
 372        IRCR_writew(trizeps_conxs_ircr);
 373        return 0;
 374}
 375
 376static void trizeps4_irda_shutdown(struct device *dev)
 377{
 378        trizeps_conxs_ircr |= ConXS_IRCR_SD;
 379        IRCR_writew(trizeps_conxs_ircr);
 380}
 381
 382static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 383{
 384        unsigned long flags;
 385
 386        local_irq_save(flags);
 387        /* Switch mode */
 388        if (mode & IR_SIRMODE)
 389                trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
 390        else if (mode & IR_FIRMODE)
 391                trizeps_conxs_ircr |= ConXS_IRCR_MODE;  /* Fast mode */
 392
 393        /* Switch power */
 394        if (mode & IR_OFF)
 395                trizeps_conxs_ircr |= ConXS_IRCR_SD;
 396        else
 397                trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
 398
 399        IRCR_writew(trizeps_conxs_ircr);
 400        local_irq_restore(flags);
 401
 402        pxa2xx_transceiver_mode(dev, mode);
 403}
 404
 405static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
 406        .gpio_pwdown            = -1,
 407        .transceiver_cap        = IR_SIRMODE | IR_FIRMODE | IR_OFF,
 408        .transceiver_mode       = trizeps4_irda_transceiver_mode,
 409        .startup                = trizeps4_irda_startup,
 410        .shutdown               = trizeps4_irda_shutdown,
 411};
 412#endif
 413
 414/****************************************************************************
 415 * OHCI USB port
 416 ****************************************************************************/
 417static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
 418        .port_mode      = PMM_PERPORT_MODE,
 419        .flags          = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 420};
 421
 422static struct map_desc trizeps4_io_desc[] __initdata = {
 423        {       /* ConXS CFSR */
 424                .virtual        = TRIZEPS4_CFSR_VIRT,
 425                .pfn            = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
 426                .length         = 0x00001000,
 427                .type           = MT_DEVICE
 428        },
 429        {       /* ConXS BCR */
 430                .virtual        = TRIZEPS4_BOCR_VIRT,
 431                .pfn            = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
 432                .length         = 0x00001000,
 433                .type           = MT_DEVICE
 434        },
 435        {       /* ConXS IRCR */
 436                .virtual        = TRIZEPS4_IRCR_VIRT,
 437                .pfn            = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
 438                .length         = 0x00001000,
 439                .type           = MT_DEVICE
 440        },
 441        {       /* ConXS DCR */
 442                .virtual        = TRIZEPS4_DICR_VIRT,
 443                .pfn            = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
 444                .length         = 0x00001000,
 445                .type           = MT_DEVICE
 446        },
 447        {       /* ConXS UPSR */
 448                .virtual        = TRIZEPS4_UPSR_VIRT,
 449                .pfn            = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
 450                .length         = 0x00001000,
 451                .type           = MT_DEVICE
 452        }
 453};
 454
 455static struct pxafb_mode_info sharp_lcd_mode = {
 456        .pixclock       = 78000,
 457        .xres           = 640,
 458        .yres           = 480,
 459        .bpp            = 8,
 460        .hsync_len      = 4,
 461        .left_margin    = 4,
 462        .right_margin   = 4,
 463        .vsync_len      = 2,
 464        .upper_margin   = 0,
 465        .lower_margin   = 0,
 466        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 467        .cmap_greyscale = 0,
 468};
 469
 470static struct pxafb_mach_info sharp_lcd = {
 471        .modes          = &sharp_lcd_mode,
 472        .num_modes      = 1,
 473        .lcd_conn       = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
 474        .cmap_inverse   = 0,
 475        .cmap_static    = 0,
 476        .pxafb_backlight_power = board_backlight_power,
 477};
 478
 479static struct pxafb_mode_info toshiba_lcd_mode = {
 480        .pixclock       = 39720,
 481        .xres           = 640,
 482        .yres           = 480,
 483        .bpp            = 8,
 484        .hsync_len      = 63,
 485        .left_margin    = 12,
 486        .right_margin   = 12,
 487        .vsync_len      = 4,
 488        .upper_margin   = 32,
 489        .lower_margin   = 10,
 490        .sync           = 0,
 491        .cmap_greyscale = 0,
 492};
 493
 494static struct pxafb_mach_info toshiba_lcd = {
 495        .modes          = &toshiba_lcd_mode,
 496        .num_modes      = 1,
 497        .lcd_conn       = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
 498        .cmap_inverse   = 0,
 499        .cmap_static    = 0,
 500        .pxafb_backlight_power = board_backlight_power,
 501};
 502
 503static void __init trizeps4_init(void)
 504{
 505        pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
 506        if (machine_is_trizeps4wl()) {
 507                pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
 508                platform_add_devices(trizeps4wl_devices,
 509                                        ARRAY_SIZE(trizeps4wl_devices));
 510        } else {
 511                platform_add_devices(trizeps4_devices,
 512                                        ARRAY_SIZE(trizeps4_devices));
 513        }
 514
 515        pxa_set_ffuart_info(NULL);
 516        pxa_set_btuart_info(NULL);
 517        pxa_set_stuart_info(NULL);
 518
 519        if (0)  /* dont know how to determine LCD */
 520                pxa_set_fb_info(NULL, &sharp_lcd);
 521        else
 522                pxa_set_fb_info(NULL, &toshiba_lcd);
 523
 524        pxa_set_mci_info(&trizeps4_mci_platform_data);
 525#ifndef STATUS_LEDS_ON_STUART_PINS
 526        pxa_set_ficp_info(&trizeps4_ficp_platform_data);
 527#endif
 528        pxa_set_ohci_info(&trizeps4_ohci_platform_data);
 529        pxa_set_ac97_info(NULL);
 530        pxa_set_i2c_info(NULL);
 531        i2c_register_board_info(0, trizeps4_i2c_devices,
 532                                        ARRAY_SIZE(trizeps4_i2c_devices));
 533
 534        /* this is the reset value */
 535        trizeps_conxs_bcr = 0x00A0;
 536
 537        BCR_writew(trizeps_conxs_bcr);
 538        board_backlight_power(1);
 539
 540        regulator_has_full_constraints();
 541}
 542
 543static void __init trizeps4_map_io(void)
 544{
 545        pxa27x_map_io();
 546        iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 547
 548        if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
 549                /* if flash is 16 bit wide its a Trizeps4 WL */
 550                __machine_arch_type = MACH_TYPE_TRIZEPS4WL;
 551                trizeps4_flash_data[0].width = 2;
 552        } else {
 553                /* if flash is 32 bit wide its a Trizeps4 */
 554                __machine_arch_type = MACH_TYPE_TRIZEPS4;
 555                trizeps4_flash_data[0].width = 4;
 556        }
 557}
 558
 559MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 560        /* MAINTAINER("Jürgen Schindele") */
 561        .atag_offset    = 0x100,
 562        .init_machine   = trizeps4_init,
 563        .map_io         = trizeps4_map_io,
 564        .nr_irqs        = PXA_NR_IRQS,
 565        .init_irq       = pxa27x_init_irq,
 566        .handle_irq     = pxa27x_handle_irq,
 567        .init_time      = pxa_timer_init,
 568        .restart        = pxa_restart,
 569MACHINE_END
 570
 571MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 572        /* MAINTAINER("Jürgen Schindele") */
 573        .atag_offset    = 0x100,
 574        .init_machine   = trizeps4_init,
 575        .map_io         = trizeps4_map_io,
 576        .nr_irqs        = PXA_NR_IRQS,
 577        .init_irq       = pxa27x_init_irq,
 578        .handle_irq     = pxa27x_handle_irq,
 579        .init_time      = pxa_timer_init,
 580        .restart        = pxa_restart,
 581MACHINE_END
 582