linux/arch/arm/mach-pxa/zylonite.c
<<
>>
Prefs
   1/*
   2 * linux/arch/arm/mach-pxa/zylonite.c
   3 *
   4 * Support for the PXA3xx Development Platform (aka Zylonite)
   5 *
   6 * Copyright (C) 2006 Marvell International Ltd.
   7 *
   8 * 2007-09-04: eric miao <eric.miao@marvell.com>
   9 *             rewrite to align with latest kernel
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License version 2 as
  13 * published by the Free Software Foundation.
  14 */
  15
  16#include <linux/module.h>
  17#include <linux/kernel.h>
  18#include <linux/interrupt.h>
  19#include <linux/leds.h>
  20#include <linux/init.h>
  21#include <linux/platform_device.h>
  22#include <linux/gpio.h>
  23#include <linux/pwm.h>
  24#include <linux/pwm_backlight.h>
  25#include <linux/smc91x.h>
  26
  27#include <asm/mach-types.h>
  28#include <asm/mach/arch.h>
  29#include "pxa3xx.h"
  30#include <mach/audio.h>
  31#include <linux/platform_data/video-pxafb.h>
  32#include "zylonite.h"
  33#include <linux/platform_data/mmc-pxamci.h>
  34#include <linux/platform_data/usb-ohci-pxa27x.h>
  35#include <linux/platform_data/keypad-pxa27x.h>
  36#include <linux/platform_data/mtd-nand-pxa3xx.h>
  37
  38#include "devices.h"
  39#include "generic.h"
  40
  41int gpio_eth_irq;
  42int gpio_debug_led1;
  43int gpio_debug_led2;
  44
  45int wm9713_irq;
  46
  47int lcd_id;
  48int lcd_orientation;
  49
  50static struct resource smc91x_resources[] = {
  51        [0] = {
  52                .start  = ZYLONITE_ETH_PHYS + 0x300,
  53                .end    = ZYLONITE_ETH_PHYS + 0xfffff,
  54                .flags  = IORESOURCE_MEM,
  55        },
  56        [1] = {
  57                .start  = -1,   /* for run-time assignment */
  58                .end    = -1,
  59                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
  60        }
  61};
  62
  63static struct smc91x_platdata zylonite_smc91x_info = {
  64        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
  65                  SMC91X_NOWAIT | SMC91X_USE_DMA,
  66};
  67
  68static struct platform_device smc91x_device = {
  69        .name           = "smc91x",
  70        .id             = 0,
  71        .num_resources  = ARRAY_SIZE(smc91x_resources),
  72        .resource       = smc91x_resources,
  73        .dev            = {
  74                .platform_data = &zylonite_smc91x_info,
  75        },
  76};
  77
  78#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
  79static struct gpio_led zylonite_debug_leds[] = {
  80        [0] = {
  81                .name                   = "zylonite:yellow:1",
  82                .default_trigger        = "heartbeat",
  83        },
  84        [1] = {
  85                .name                   = "zylonite:yellow:2",
  86                .default_trigger        = "default-on",
  87        },
  88};
  89
  90static struct gpio_led_platform_data zylonite_debug_leds_info = {
  91        .leds           = zylonite_debug_leds,
  92        .num_leds       = ARRAY_SIZE(zylonite_debug_leds),
  93};
  94
  95static struct platform_device zylonite_device_leds = {
  96        .name           = "leds-gpio",
  97        .id             = -1,
  98        .dev            = {
  99                .platform_data = &zylonite_debug_leds_info,
 100        }
 101};
 102
 103static void __init zylonite_init_leds(void)
 104{
 105        zylonite_debug_leds[0].gpio = gpio_debug_led1;
 106        zylonite_debug_leds[1].gpio = gpio_debug_led2;
 107
 108        platform_device_register(&zylonite_device_leds);
 109}
 110#else
 111static inline void zylonite_init_leds(void) {}
 112#endif
 113
 114#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 115static struct pwm_lookup zylonite_pwm_lookup[] = {
 116        PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
 117                   PWM_POLARITY_NORMAL),
 118};
 119
 120static struct platform_pwm_backlight_data zylonite_backlight_data = {
 121        .max_brightness = 100,
 122        .dft_brightness = 100,
 123        .enable_gpio    = -1,
 124};
 125
 126static struct platform_device zylonite_backlight_device = {
 127        .name           = "pwm-backlight",
 128        .dev            = {
 129                .parent = &pxa27x_device_pwm1.dev,
 130                .platform_data  = &zylonite_backlight_data,
 131        },
 132};
 133
 134static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
 135        .pixclock               = 110000,
 136        .xres                   = 240,
 137        .yres                   = 320,
 138        .bpp                    = 16,
 139        .hsync_len              = 4,
 140        .left_margin            = 6,
 141        .right_margin           = 4,
 142        .vsync_len              = 2,
 143        .upper_margin           = 2,
 144        .lower_margin           = 3,
 145        .sync                   = FB_SYNC_VERT_HIGH_ACT,
 146};
 147
 148static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
 149        .pixclock               = 50000,
 150        .xres                   = 640,
 151        .yres                   = 480,
 152        .bpp                    = 16,
 153        .hsync_len              = 1,
 154        .left_margin            = 0x9f,
 155        .right_margin           = 1,
 156        .vsync_len              = 44,
 157        .upper_margin           = 0,
 158        .lower_margin           = 0,
 159        .sync                   = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
 160};
 161
 162static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
 163        .num_modes              = 1,
 164        .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 165};
 166
 167static struct pxafb_mode_info sharp_ls037_modes[] = {
 168        [0] = {
 169                .pixclock       = 158000,
 170                .xres           = 240,
 171                .yres           = 320,
 172                .bpp            = 16,
 173                .hsync_len      = 4,
 174                .left_margin    = 39,
 175                .right_margin   = 39,
 176                .vsync_len      = 1,
 177                .upper_margin   = 2,
 178                .lower_margin   = 3,
 179                .sync           = 0,
 180        },
 181        [1] = {
 182                .pixclock       = 39700,
 183                .xres           = 480,
 184                .yres           = 640,
 185                .bpp            = 16,
 186                .hsync_len      = 8,
 187                .left_margin    = 81,
 188                .right_margin   = 81,
 189                .vsync_len      = 1,
 190                .upper_margin   = 2,
 191                .lower_margin   = 7,
 192                .sync           = 0,
 193        },
 194};
 195
 196static struct pxafb_mach_info zylonite_sharp_lcd_info = {
 197        .modes                  = sharp_ls037_modes,
 198        .num_modes              = 2,
 199        .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 200};
 201
 202static void __init zylonite_init_lcd(void)
 203{
 204        pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
 205        platform_device_register(&zylonite_backlight_device);
 206
 207        if (lcd_id & 0x20) {
 208                pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
 209                return;
 210        }
 211
 212        /* legacy LCD panels, it would be handy here if LCD panel type can
 213         * be decided at run-time
 214         */
 215        if (1)
 216                zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
 217        else
 218                zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
 219
 220        pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
 221}
 222#else
 223static inline void zylonite_init_lcd(void) {}
 224#endif
 225
 226#if defined(CONFIG_MMC)
 227static struct pxamci_platform_data zylonite_mci_platform_data = {
 228        .detect_delay_ms= 200,
 229        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 230        .gpio_card_detect = EXT_GPIO(0),
 231        .gpio_card_ro   = EXT_GPIO(2),
 232        .gpio_power     = -1,
 233};
 234
 235static struct pxamci_platform_data zylonite_mci2_platform_data = {
 236        .detect_delay_ms= 200,
 237        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 238        .gpio_card_detect = EXT_GPIO(1),
 239        .gpio_card_ro   = EXT_GPIO(3),
 240        .gpio_power     = -1,
 241};
 242
 243static struct pxamci_platform_data zylonite_mci3_platform_data = {
 244        .detect_delay_ms= 200,
 245        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 246        .gpio_card_detect = EXT_GPIO(30),
 247        .gpio_card_ro   = EXT_GPIO(31),
 248        .gpio_power     = -1,
 249};
 250
 251static void __init zylonite_init_mmc(void)
 252{
 253        pxa_set_mci_info(&zylonite_mci_platform_data);
 254        pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
 255        if (cpu_is_pxa310())
 256                pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
 257}
 258#else
 259static inline void zylonite_init_mmc(void) {}
 260#endif
 261
 262#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 263static const unsigned int zylonite_matrix_key_map[] = {
 264        /* KEY(row, col, key_code) */
 265        KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
 266        KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
 267        KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
 268        KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
 269        KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
 270        KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
 271        KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
 272
 273        KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
 274        KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
 275        KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
 276
 277        KEY(4, 5, KEY_SPACE),
 278        KEY(5, 3, KEY_KPASTERISK),      /* * */
 279        KEY(5, 4, KEY_KPDOT),           /* #" */
 280
 281        KEY(0, 7, KEY_UP),
 282        KEY(1, 7, KEY_DOWN),
 283        KEY(2, 7, KEY_LEFT),
 284        KEY(3, 7, KEY_RIGHT),
 285        KEY(2, 6, KEY_HOME),
 286        KEY(3, 6, KEY_END),
 287        KEY(6, 4, KEY_DELETE),
 288        KEY(6, 6, KEY_BACK),
 289        KEY(6, 3, KEY_CAPSLOCK),        /* KEY_LEFTSHIFT), */
 290
 291        KEY(4, 6, KEY_ENTER),           /* scroll push */
 292        KEY(5, 7, KEY_ENTER),           /* keypad action */
 293
 294        KEY(0, 4, KEY_EMAIL),
 295        KEY(5, 6, KEY_SEND),
 296        KEY(4, 0, KEY_CALENDAR),
 297        KEY(7, 6, KEY_RECORD),
 298        KEY(6, 7, KEY_VOLUMEUP),
 299        KEY(7, 7, KEY_VOLUMEDOWN),
 300
 301        KEY(0, 6, KEY_F22),     /* soft1 */
 302        KEY(1, 6, KEY_F23),     /* soft2 */
 303        KEY(0, 3, KEY_AUX),     /* contact */
 304};
 305
 306static struct matrix_keymap_data zylonite_matrix_keymap_data = {
 307        .keymap                 = zylonite_matrix_key_map,
 308        .keymap_size            = ARRAY_SIZE(zylonite_matrix_key_map),
 309};
 310
 311static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
 312        .matrix_key_rows        = 8,
 313        .matrix_key_cols        = 8,
 314        .matrix_keymap_data     = &zylonite_matrix_keymap_data,
 315
 316        .enable_rotary0         = 1,
 317        .rotary0_up_key         = KEY_UP,
 318        .rotary0_down_key       = KEY_DOWN,
 319
 320        .debounce_interval      = 30,
 321};
 322
 323static void __init zylonite_init_keypad(void)
 324{
 325        pxa_set_keypad_info(&zylonite_keypad_info);
 326}
 327#else
 328static inline void zylonite_init_keypad(void) {}
 329#endif
 330
 331#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 332static struct mtd_partition zylonite_nand_partitions[] = {
 333        [0] = {
 334                .name        = "Bootloader",
 335                .offset      = 0,
 336                .size        = 0x060000,
 337                .mask_flags  = MTD_WRITEABLE, /* force read-only */
 338        },
 339        [1] = {
 340                .name        = "Kernel",
 341                .offset      = 0x060000,
 342                .size        = 0x200000,
 343                .mask_flags  = MTD_WRITEABLE, /* force read-only */
 344        },
 345        [2] = {
 346                .name        = "Filesystem",
 347                .offset      = 0x0260000,
 348                .size        = 0x3000000,     /* 48M - rootfs */
 349        },
 350        [3] = {
 351                .name        = "MassStorage",
 352                .offset      = 0x3260000,
 353                .size        = 0x3d40000,
 354        },
 355        [4] = {
 356                .name        = "BBT",
 357                .offset      = 0x6FA0000,
 358                .size        = 0x80000,
 359                .mask_flags  = MTD_WRITEABLE,  /* force read-only */
 360        },
 361        /* NOTE: we reserve some blocks at the end of the NAND flash for
 362         * bad block management, and the max number of relocation blocks
 363         * differs on different platforms. Please take care with it when
 364         * defining the partition table.
 365         */
 366};
 367
 368static struct pxa3xx_nand_platform_data zylonite_nand_info = {
 369        .parts          = zylonite_nand_partitions,
 370        .nr_parts       = ARRAY_SIZE(zylonite_nand_partitions),
 371};
 372
 373static void __init zylonite_init_nand(void)
 374{
 375        pxa3xx_set_nand_info(&zylonite_nand_info);
 376}
 377#else
 378static inline void zylonite_init_nand(void) {}
 379#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 380
 381#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 382static struct pxaohci_platform_data zylonite_ohci_info = {
 383        .port_mode      = PMM_PERPORT_MODE,
 384        .flags          = ENABLE_PORT1 | ENABLE_PORT2 |
 385                          POWER_CONTROL_LOW | POWER_SENSE_LOW,
 386};
 387
 388static void __init zylonite_init_ohci(void)
 389{
 390        pxa_set_ohci_info(&zylonite_ohci_info);
 391}
 392#else
 393static inline void zylonite_init_ohci(void) {}
 394#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
 395
 396static void __init zylonite_init(void)
 397{
 398        pxa_set_ffuart_info(NULL);
 399        pxa_set_btuart_info(NULL);
 400        pxa_set_stuart_info(NULL);
 401
 402        /* board-processor specific initialization */
 403        zylonite_pxa300_init();
 404        zylonite_pxa320_init();
 405
 406        /*
 407         * Note: We depend that the bootloader set
 408         * the correct value to MSC register for SMC91x.
 409         */
 410        smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
 411        smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
 412        platform_device_register(&smc91x_device);
 413
 414        pxa_set_ac97_info(NULL);
 415        zylonite_init_lcd();
 416        zylonite_init_mmc();
 417        zylonite_init_keypad();
 418        zylonite_init_nand();
 419        zylonite_init_leds();
 420        zylonite_init_ohci();
 421}
 422
 423MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 424        .atag_offset    = 0x100,
 425        .map_io         = pxa3xx_map_io,
 426        .nr_irqs        = ZYLONITE_NR_IRQS,
 427        .init_irq       = pxa3xx_init_irq,
 428        .handle_irq     = pxa3xx_handle_irq,
 429        .init_time      = pxa_timer_init,
 430        .init_machine   = zylonite_init,
 431        .restart        = pxa_restart,
 432MACHINE_END
 433