linux/arch/mips/alchemy/devboards/db1200.c
<<
>>
Prefs
   1/*
   2 * DBAu1200/PBAu1200 board platform device registration
   3 *
   4 * Copyright (C) 2008-2011 Manuel Lauss
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License as published by
   8 * the Free Software Foundation; either version 2 of the License, or
   9 * (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 *
  16 * You should have received a copy of the GNU General Public License
  17 * along with this program; if not, write to the Free Software
  18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  19 */
  20
  21#include <linux/clk.h>
  22#include <linux/dma-mapping.h>
  23#include <linux/gpio.h>
  24#include <linux/i2c.h>
  25#include <linux/init.h>
  26#include <linux/module.h>
  27#include <linux/interrupt.h>
  28#include <linux/io.h>
  29#include <linux/leds.h>
  30#include <linux/mmc/host.h>
  31#include <linux/mtd/mtd.h>
  32#include <linux/mtd/rawnand.h>
  33#include <linux/mtd/partitions.h>
  34#include <linux/platform_device.h>
  35#include <linux/serial_8250.h>
  36#include <linux/spi/spi.h>
  37#include <linux/spi/flash.h>
  38#include <linux/smc91x.h>
  39#include <linux/ata_platform.h>
  40#include <asm/mach-au1x00/au1000.h>
  41#include <asm/mach-au1x00/au1100_mmc.h>
  42#include <asm/mach-au1x00/au1xxx_dbdma.h>
  43#include <asm/mach-au1x00/au1xxx_psc.h>
  44#include <asm/mach-au1x00/au1200fb.h>
  45#include <asm/mach-au1x00/au1550_spi.h>
  46#include <asm/mach-db1x00/bcsr.h>
  47
  48#include "platform.h"
  49
  50#define BCSR_INT_IDE            0x0001
  51#define BCSR_INT_ETH            0x0002
  52#define BCSR_INT_PC0            0x0004
  53#define BCSR_INT_PC0STSCHG      0x0008
  54#define BCSR_INT_PC1            0x0010
  55#define BCSR_INT_PC1STSCHG      0x0020
  56#define BCSR_INT_DC             0x0040
  57#define BCSR_INT_FLASHBUSY      0x0080
  58#define BCSR_INT_PC0INSERT      0x0100
  59#define BCSR_INT_PC0EJECT       0x0200
  60#define BCSR_INT_PC1INSERT      0x0400
  61#define BCSR_INT_PC1EJECT       0x0800
  62#define BCSR_INT_SD0INSERT      0x1000
  63#define BCSR_INT_SD0EJECT       0x2000
  64#define BCSR_INT_SD1INSERT      0x4000
  65#define BCSR_INT_SD1EJECT       0x8000
  66
  67#define DB1200_IDE_PHYS_ADDR    0x18800000
  68#define DB1200_IDE_REG_SHIFT    5
  69#define DB1200_IDE_PHYS_LEN     (16 << DB1200_IDE_REG_SHIFT)
  70#define DB1200_ETH_PHYS_ADDR    0x19000300
  71#define DB1200_NAND_PHYS_ADDR   0x20000000
  72
  73#define PB1200_IDE_PHYS_ADDR    0x0C800000
  74#define PB1200_ETH_PHYS_ADDR    0x0D000300
  75#define PB1200_NAND_PHYS_ADDR   0x1C000000
  76
  77#define DB1200_INT_BEGIN        (AU1000_MAX_INTR + 1)
  78#define DB1200_IDE_INT          (DB1200_INT_BEGIN + 0)
  79#define DB1200_ETH_INT          (DB1200_INT_BEGIN + 1)
  80#define DB1200_PC0_INT          (DB1200_INT_BEGIN + 2)
  81#define DB1200_PC0_STSCHG_INT   (DB1200_INT_BEGIN + 3)
  82#define DB1200_PC1_INT          (DB1200_INT_BEGIN + 4)
  83#define DB1200_PC1_STSCHG_INT   (DB1200_INT_BEGIN + 5)
  84#define DB1200_DC_INT           (DB1200_INT_BEGIN + 6)
  85#define DB1200_FLASHBUSY_INT    (DB1200_INT_BEGIN + 7)
  86#define DB1200_PC0_INSERT_INT   (DB1200_INT_BEGIN + 8)
  87#define DB1200_PC0_EJECT_INT    (DB1200_INT_BEGIN + 9)
  88#define DB1200_PC1_INSERT_INT   (DB1200_INT_BEGIN + 10)
  89#define DB1200_PC1_EJECT_INT    (DB1200_INT_BEGIN + 11)
  90#define DB1200_SD0_INSERT_INT   (DB1200_INT_BEGIN + 12)
  91#define DB1200_SD0_EJECT_INT    (DB1200_INT_BEGIN + 13)
  92#define PB1200_SD1_INSERT_INT   (DB1200_INT_BEGIN + 14)
  93#define PB1200_SD1_EJECT_INT    (DB1200_INT_BEGIN + 15)
  94#define DB1200_INT_END          (DB1200_INT_BEGIN + 15)
  95
  96const char *get_system_type(void);
  97
  98static int __init db1200_detect_board(void)
  99{
 100        int bid;
 101
 102        /* try the DB1200 first */
 103        bcsr_init(DB1200_BCSR_PHYS_ADDR,
 104                  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
 105        if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
 106                unsigned short t = bcsr_read(BCSR_HEXLEDS);
 107                bcsr_write(BCSR_HEXLEDS, ~t);
 108                if (bcsr_read(BCSR_HEXLEDS) != t) {
 109                        bcsr_write(BCSR_HEXLEDS, t);
 110                        return 0;
 111                }
 112        }
 113
 114        /* okay, try the PB1200 then */
 115        bcsr_init(PB1200_BCSR_PHYS_ADDR,
 116                  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
 117        bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 118        if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
 119            (bid == BCSR_WHOAMI_PB1200_DDR2)) {
 120                unsigned short t = bcsr_read(BCSR_HEXLEDS);
 121                bcsr_write(BCSR_HEXLEDS, ~t);
 122                if (bcsr_read(BCSR_HEXLEDS) != t) {
 123                        bcsr_write(BCSR_HEXLEDS, t);
 124                        return 0;
 125                }
 126        }
 127
 128        return 1;       /* it's neither */
 129}
 130
 131int __init db1200_board_setup(void)
 132{
 133        unsigned short whoami;
 134
 135        if (db1200_detect_board())
 136                return -ENODEV;
 137
 138        whoami = bcsr_read(BCSR_WHOAMI);
 139        switch (BCSR_WHOAMI_BOARD(whoami)) {
 140        case BCSR_WHOAMI_PB1200_DDR1:
 141        case BCSR_WHOAMI_PB1200_DDR2:
 142        case BCSR_WHOAMI_DB1200:
 143                break;
 144        default:
 145                return -ENODEV;
 146        }
 147
 148        printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
 149                "  Board-ID %d  Daughtercard ID %d\n", get_system_type(),
 150                (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
 151
 152        return 0;
 153}
 154
 155/******************************************************************************/
 156
 157static struct mtd_partition db1200_spiflash_parts[] = {
 158        {
 159                .name   = "spi_flash",
 160                .offset = 0,
 161                .size   = MTDPART_SIZ_FULL,
 162        },
 163};
 164
 165static struct flash_platform_data db1200_spiflash_data = {
 166        .name           = "s25fl001",
 167        .parts          = db1200_spiflash_parts,
 168        .nr_parts       = ARRAY_SIZE(db1200_spiflash_parts),
 169        .type           = "m25p10",
 170};
 171
 172static struct spi_board_info db1200_spi_devs[] __initdata = {
 173        {
 174                /* TI TMP121AIDBVR temp sensor */
 175                .modalias       = "tmp121",
 176                .max_speed_hz   = 2000000,
 177                .bus_num        = 0,
 178                .chip_select    = 0,
 179                .mode           = 0,
 180        },
 181        {
 182                /* Spansion S25FL001D0FMA SPI flash */
 183                .modalias       = "m25p80",
 184                .max_speed_hz   = 50000000,
 185                .bus_num        = 0,
 186                .chip_select    = 1,
 187                .mode           = 0,
 188                .platform_data  = &db1200_spiflash_data,
 189        },
 190};
 191
 192static struct i2c_board_info db1200_i2c_devs[] __initdata = {
 193        { I2C_BOARD_INFO("24c04", 0x52),  }, /* AT24C04-10 I2C eeprom */
 194        { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
 195        { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */
 196};
 197
 198/**********************************************************************/
 199
 200static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 201                                 unsigned int ctrl)
 202{
 203        struct nand_chip *this = mtd_to_nand(mtd);
 204        unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
 205
 206        ioaddr &= 0xffffff00;
 207
 208        if (ctrl & NAND_CLE) {
 209                ioaddr += MEM_STNAND_CMD;
 210        } else if (ctrl & NAND_ALE) {
 211                ioaddr += MEM_STNAND_ADDR;
 212        } else {
 213                /* assume we want to r/w real data  by default */
 214                ioaddr += MEM_STNAND_DATA;
 215        }
 216        this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
 217        if (cmd != NAND_CMD_NONE) {
 218                __raw_writeb(cmd, this->IO_ADDR_W);
 219                wmb();
 220        }
 221}
 222
 223static int au1200_nand_device_ready(struct mtd_info *mtd)
 224{
 225        return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
 226}
 227
 228static struct mtd_partition db1200_nand_parts[] = {
 229        {
 230                .name   = "NAND FS 0",
 231                .offset = 0,
 232                .size   = 8 * 1024 * 1024,
 233        },
 234        {
 235                .name   = "NAND FS 1",
 236                .offset = MTDPART_OFS_APPEND,
 237                .size   = MTDPART_SIZ_FULL
 238        },
 239};
 240
 241struct platform_nand_data db1200_nand_platdata = {
 242        .chip = {
 243                .nr_chips       = 1,
 244                .chip_offset    = 0,
 245                .nr_partitions  = ARRAY_SIZE(db1200_nand_parts),
 246                .partitions     = db1200_nand_parts,
 247                .chip_delay     = 20,
 248        },
 249        .ctrl = {
 250                .dev_ready      = au1200_nand_device_ready,
 251                .cmd_ctrl       = au1200_nand_cmd_ctrl,
 252        },
 253};
 254
 255static struct resource db1200_nand_res[] = {
 256        [0] = {
 257                .start  = DB1200_NAND_PHYS_ADDR,
 258                .end    = DB1200_NAND_PHYS_ADDR + 0xff,
 259                .flags  = IORESOURCE_MEM,
 260        },
 261};
 262
 263static struct platform_device db1200_nand_dev = {
 264        .name           = "gen_nand",
 265        .num_resources  = ARRAY_SIZE(db1200_nand_res),
 266        .resource       = db1200_nand_res,
 267        .id             = -1,
 268        .dev            = {
 269                .platform_data = &db1200_nand_platdata,
 270        }
 271};
 272
 273/**********************************************************************/
 274
 275static struct smc91x_platdata db1200_eth_data = {
 276        .flags  = SMC91X_NOWAIT | SMC91X_USE_16BIT,
 277        .leda   = RPC_LED_100_10,
 278        .ledb   = RPC_LED_TX_RX,
 279};
 280
 281static struct resource db1200_eth_res[] = {
 282        [0] = {
 283                .start  = DB1200_ETH_PHYS_ADDR,
 284                .end    = DB1200_ETH_PHYS_ADDR + 0xf,
 285                .flags  = IORESOURCE_MEM,
 286        },
 287        [1] = {
 288                .start  = DB1200_ETH_INT,
 289                .end    = DB1200_ETH_INT,
 290                .flags  = IORESOURCE_IRQ,
 291        },
 292};
 293
 294static struct platform_device db1200_eth_dev = {
 295        .dev    = {
 296                .platform_data  = &db1200_eth_data,
 297        },
 298        .name           = "smc91x",
 299        .id             = -1,
 300        .num_resources  = ARRAY_SIZE(db1200_eth_res),
 301        .resource       = db1200_eth_res,
 302};
 303
 304/**********************************************************************/
 305
 306static struct pata_platform_info db1200_ide_info = {
 307        .ioport_shift   = DB1200_IDE_REG_SHIFT,
 308};
 309
 310#define IDE_ALT_START   (14 << DB1200_IDE_REG_SHIFT)
 311static struct resource db1200_ide_res[] = {
 312        [0] = {
 313                .start  = DB1200_IDE_PHYS_ADDR,
 314                .end    = DB1200_IDE_PHYS_ADDR + IDE_ALT_START - 1,
 315                .flags  = IORESOURCE_MEM,
 316        },
 317        [1] = {
 318                .start  = DB1200_IDE_PHYS_ADDR + IDE_ALT_START,
 319                .end    = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
 320                .flags  = IORESOURCE_MEM,
 321        },
 322        [2] = {
 323                .start  = DB1200_IDE_INT,
 324                .end    = DB1200_IDE_INT,
 325                .flags  = IORESOURCE_IRQ,
 326        },
 327};
 328
 329static u64 au1200_ide_dmamask = DMA_BIT_MASK(32);
 330
 331static struct platform_device db1200_ide_dev = {
 332        .name           = "pata_platform",
 333        .id             = 0,
 334        .dev = {
 335                .dma_mask               = &au1200_ide_dmamask,
 336                .coherent_dma_mask      = DMA_BIT_MASK(32),
 337                .platform_data          = &db1200_ide_info,
 338        },
 339        .num_resources  = ARRAY_SIZE(db1200_ide_res),
 340        .resource       = db1200_ide_res,
 341};
 342
 343/**********************************************************************/
 344
 345/* SD carddetects:  they're supposed to be edge-triggered, but ack
 346 * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
 347 * is disabled and its counterpart enabled.  The 200ms timeout is
 348 * because the carddetect usually triggers twice, after debounce.
 349 */
 350static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
 351{
 352        disable_irq_nosync(irq);
 353        return IRQ_WAKE_THREAD;
 354}
 355
 356static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
 357{
 358        void (*mmc_cd)(struct mmc_host *, unsigned long);
 359
 360        /* link against CONFIG_MMC=m */
 361        mmc_cd = symbol_get(mmc_detect_change);
 362        if (mmc_cd) {
 363                mmc_cd(ptr, msecs_to_jiffies(200));
 364                symbol_put(mmc_detect_change);
 365        }
 366
 367        msleep(100);    /* debounce */
 368        if (irq == DB1200_SD0_INSERT_INT)
 369                enable_irq(DB1200_SD0_EJECT_INT);
 370        else
 371                enable_irq(DB1200_SD0_INSERT_INT);
 372
 373        return IRQ_HANDLED;
 374}
 375
 376static int db1200_mmc_cd_setup(void *mmc_host, int en)
 377{
 378        int ret;
 379
 380        if (en) {
 381                ret = request_threaded_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
 382                                db1200_mmc_cdfn, 0, "sd_insert", mmc_host);
 383                if (ret)
 384                        goto out;
 385
 386                ret = request_threaded_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
 387                                db1200_mmc_cdfn, 0, "sd_eject", mmc_host);
 388                if (ret) {
 389                        free_irq(DB1200_SD0_INSERT_INT, mmc_host);
 390                        goto out;
 391                }
 392
 393                if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT)
 394                        enable_irq(DB1200_SD0_EJECT_INT);
 395                else
 396                        enable_irq(DB1200_SD0_INSERT_INT);
 397
 398        } else {
 399                free_irq(DB1200_SD0_INSERT_INT, mmc_host);
 400                free_irq(DB1200_SD0_EJECT_INT, mmc_host);
 401        }
 402        ret = 0;
 403out:
 404        return ret;
 405}
 406
 407static void db1200_mmc_set_power(void *mmc_host, int state)
 408{
 409        if (state) {
 410                bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
 411                msleep(400);    /* stabilization time */
 412        } else
 413                bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
 414}
 415
 416static int db1200_mmc_card_readonly(void *mmc_host)
 417{
 418        return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
 419}
 420
 421static int db1200_mmc_card_inserted(void *mmc_host)
 422{
 423        return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
 424}
 425
 426static void db1200_mmcled_set(struct led_classdev *led,
 427                              enum led_brightness brightness)
 428{
 429        if (brightness != LED_OFF)
 430                bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
 431        else
 432                bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
 433}
 434
 435static struct led_classdev db1200_mmc_led = {
 436        .brightness_set = db1200_mmcled_set,
 437};
 438
 439/* -- */
 440
 441static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
 442{
 443        disable_irq_nosync(irq);
 444        return IRQ_WAKE_THREAD;
 445}
 446
 447static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
 448{
 449        void (*mmc_cd)(struct mmc_host *, unsigned long);
 450
 451        /* link against CONFIG_MMC=m */
 452        mmc_cd = symbol_get(mmc_detect_change);
 453        if (mmc_cd) {
 454                mmc_cd(ptr, msecs_to_jiffies(200));
 455                symbol_put(mmc_detect_change);
 456        }
 457
 458        msleep(100);    /* debounce */
 459        if (irq == PB1200_SD1_INSERT_INT)
 460                enable_irq(PB1200_SD1_EJECT_INT);
 461        else
 462                enable_irq(PB1200_SD1_INSERT_INT);
 463
 464        return IRQ_HANDLED;
 465}
 466
 467static int pb1200_mmc1_cd_setup(void *mmc_host, int en)
 468{
 469        int ret;
 470
 471        if (en) {
 472                ret = request_threaded_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd,
 473                                pb1200_mmc1_cdfn, 0, "sd1_insert", mmc_host);
 474                if (ret)
 475                        goto out;
 476
 477                ret = request_threaded_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd,
 478                                pb1200_mmc1_cdfn, 0, "sd1_eject", mmc_host);
 479                if (ret) {
 480                        free_irq(PB1200_SD1_INSERT_INT, mmc_host);
 481                        goto out;
 482                }
 483
 484                if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT)
 485                        enable_irq(PB1200_SD1_EJECT_INT);
 486                else
 487                        enable_irq(PB1200_SD1_INSERT_INT);
 488
 489        } else {
 490                free_irq(PB1200_SD1_INSERT_INT, mmc_host);
 491                free_irq(PB1200_SD1_EJECT_INT, mmc_host);
 492        }
 493        ret = 0;
 494out:
 495        return ret;
 496}
 497
 498static void pb1200_mmc1led_set(struct led_classdev *led,
 499                        enum led_brightness brightness)
 500{
 501        if (brightness != LED_OFF)
 502                        bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
 503        else
 504                        bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
 505}
 506
 507static struct led_classdev pb1200_mmc1_led = {
 508        .brightness_set = pb1200_mmc1led_set,
 509};
 510
 511static void pb1200_mmc1_set_power(void *mmc_host, int state)
 512{
 513        if (state) {
 514                bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
 515                msleep(400);    /* stabilization time */
 516        } else
 517                bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
 518}
 519
 520static int pb1200_mmc1_card_readonly(void *mmc_host)
 521{
 522        return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
 523}
 524
 525static int pb1200_mmc1_card_inserted(void *mmc_host)
 526{
 527        return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
 528}
 529
 530
 531static struct au1xmmc_platform_data db1200_mmc_platdata[2] = {
 532        [0] = {
 533                .cd_setup       = db1200_mmc_cd_setup,
 534                .set_power      = db1200_mmc_set_power,
 535                .card_inserted  = db1200_mmc_card_inserted,
 536                .card_readonly  = db1200_mmc_card_readonly,
 537                .led            = &db1200_mmc_led,
 538        },
 539        [1] = {
 540                .cd_setup       = pb1200_mmc1_cd_setup,
 541                .set_power      = pb1200_mmc1_set_power,
 542                .card_inserted  = pb1200_mmc1_card_inserted,
 543                .card_readonly  = pb1200_mmc1_card_readonly,
 544                .led            = &pb1200_mmc1_led,
 545        },
 546};
 547
 548static struct resource au1200_mmc0_resources[] = {
 549        [0] = {
 550                .start  = AU1100_SD0_PHYS_ADDR,
 551                .end    = AU1100_SD0_PHYS_ADDR + 0xfff,
 552                .flags  = IORESOURCE_MEM,
 553        },
 554        [1] = {
 555                .start  = AU1200_SD_INT,
 556                .end    = AU1200_SD_INT,
 557                .flags  = IORESOURCE_IRQ,
 558        },
 559        [2] = {
 560                .start  = AU1200_DSCR_CMD0_SDMS_TX0,
 561                .end    = AU1200_DSCR_CMD0_SDMS_TX0,
 562                .flags  = IORESOURCE_DMA,
 563        },
 564        [3] = {
 565                .start  = AU1200_DSCR_CMD0_SDMS_RX0,
 566                .end    = AU1200_DSCR_CMD0_SDMS_RX0,
 567                .flags  = IORESOURCE_DMA,
 568        }
 569};
 570
 571static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
 572
 573static struct platform_device db1200_mmc0_dev = {
 574        .name           = "au1xxx-mmc",
 575        .id             = 0,
 576        .dev = {
 577                .dma_mask               = &au1xxx_mmc_dmamask,
 578                .coherent_dma_mask      = DMA_BIT_MASK(32),
 579                .platform_data          = &db1200_mmc_platdata[0],
 580        },
 581        .num_resources  = ARRAY_SIZE(au1200_mmc0_resources),
 582        .resource       = au1200_mmc0_resources,
 583};
 584
 585static struct resource au1200_mmc1_res[] = {
 586        [0] = {
 587                .start  = AU1100_SD1_PHYS_ADDR,
 588                .end    = AU1100_SD1_PHYS_ADDR + 0xfff,
 589                .flags  = IORESOURCE_MEM,
 590        },
 591        [1] = {
 592                .start  = AU1200_SD_INT,
 593                .end    = AU1200_SD_INT,
 594                .flags  = IORESOURCE_IRQ,
 595        },
 596        [2] = {
 597                .start  = AU1200_DSCR_CMD0_SDMS_TX1,
 598                .end    = AU1200_DSCR_CMD0_SDMS_TX1,
 599                .flags  = IORESOURCE_DMA,
 600        },
 601        [3] = {
 602                .start  = AU1200_DSCR_CMD0_SDMS_RX1,
 603                .end    = AU1200_DSCR_CMD0_SDMS_RX1,
 604                .flags  = IORESOURCE_DMA,
 605        }
 606};
 607
 608static struct platform_device pb1200_mmc1_dev = {
 609        .name           = "au1xxx-mmc",
 610        .id             = 1,
 611        .dev = {
 612                .dma_mask               = &au1xxx_mmc_dmamask,
 613                .coherent_dma_mask      = DMA_BIT_MASK(32),
 614                .platform_data          = &db1200_mmc_platdata[1],
 615        },
 616        .num_resources  = ARRAY_SIZE(au1200_mmc1_res),
 617        .resource       = au1200_mmc1_res,
 618};
 619
 620/**********************************************************************/
 621
 622static int db1200fb_panel_index(void)
 623{
 624        return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
 625}
 626
 627static int db1200fb_panel_init(void)
 628{
 629        /* Apply power */
 630        bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
 631                                BCSR_BOARD_LCDBL);
 632        return 0;
 633}
 634
 635static int db1200fb_panel_shutdown(void)
 636{
 637        /* Remove power */
 638        bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
 639                             BCSR_BOARD_LCDBL, 0);
 640        return 0;
 641}
 642
 643static struct au1200fb_platdata db1200fb_pd = {
 644        .panel_index    = db1200fb_panel_index,
 645        .panel_init     = db1200fb_panel_init,
 646        .panel_shutdown = db1200fb_panel_shutdown,
 647};
 648
 649static struct resource au1200_lcd_res[] = {
 650        [0] = {
 651                .start  = AU1200_LCD_PHYS_ADDR,
 652                .end    = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
 653                .flags  = IORESOURCE_MEM,
 654        },
 655        [1] = {
 656                .start  = AU1200_LCD_INT,
 657                .end    = AU1200_LCD_INT,
 658                .flags  = IORESOURCE_IRQ,
 659        }
 660};
 661
 662static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
 663
 664static struct platform_device au1200_lcd_dev = {
 665        .name           = "au1200-lcd",
 666        .id             = 0,
 667        .dev = {
 668                .dma_mask               = &au1200_lcd_dmamask,
 669                .coherent_dma_mask      = DMA_BIT_MASK(32),
 670                .platform_data          = &db1200fb_pd,
 671        },
 672        .num_resources  = ARRAY_SIZE(au1200_lcd_res),
 673        .resource       = au1200_lcd_res,
 674};
 675
 676/**********************************************************************/
 677
 678static struct resource au1200_psc0_res[] = {
 679        [0] = {
 680                .start  = AU1550_PSC0_PHYS_ADDR,
 681                .end    = AU1550_PSC0_PHYS_ADDR + 0xfff,
 682                .flags  = IORESOURCE_MEM,
 683        },
 684        [1] = {
 685                .start  = AU1200_PSC0_INT,
 686                .end    = AU1200_PSC0_INT,
 687                .flags  = IORESOURCE_IRQ,
 688        },
 689        [2] = {
 690                .start  = AU1200_DSCR_CMD0_PSC0_TX,
 691                .end    = AU1200_DSCR_CMD0_PSC0_TX,
 692                .flags  = IORESOURCE_DMA,
 693        },
 694        [3] = {
 695                .start  = AU1200_DSCR_CMD0_PSC0_RX,
 696                .end    = AU1200_DSCR_CMD0_PSC0_RX,
 697                .flags  = IORESOURCE_DMA,
 698        },
 699};
 700
 701static struct platform_device db1200_i2c_dev = {
 702        .name           = "au1xpsc_smbus",
 703        .id             = 0,    /* bus number */
 704        .num_resources  = ARRAY_SIZE(au1200_psc0_res),
 705        .resource       = au1200_psc0_res,
 706};
 707
 708static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
 709{
 710        if (cs)
 711                bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL);
 712        else
 713                bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0);
 714}
 715
 716static struct au1550_spi_info db1200_spi_platdata = {
 717        .mainclk_hz     = 50000000,     /* PSC0 clock */
 718        .num_chipselect = 2,
 719        .activate_cs    = db1200_spi_cs_en,
 720};
 721
 722static u64 spi_dmamask = DMA_BIT_MASK(32);
 723
 724static struct platform_device db1200_spi_dev = {
 725        .dev    = {
 726                .dma_mask               = &spi_dmamask,
 727                .coherent_dma_mask      = DMA_BIT_MASK(32),
 728                .platform_data          = &db1200_spi_platdata,
 729        },
 730        .name           = "au1550-spi",
 731        .id             = 0,    /* bus number */
 732        .num_resources  = ARRAY_SIZE(au1200_psc0_res),
 733        .resource       = au1200_psc0_res,
 734};
 735
 736static struct resource au1200_psc1_res[] = {
 737        [0] = {
 738                .start  = AU1550_PSC1_PHYS_ADDR,
 739                .end    = AU1550_PSC1_PHYS_ADDR + 0xfff,
 740                .flags  = IORESOURCE_MEM,
 741        },
 742        [1] = {
 743                .start  = AU1200_PSC1_INT,
 744                .end    = AU1200_PSC1_INT,
 745                .flags  = IORESOURCE_IRQ,
 746        },
 747        [2] = {
 748                .start  = AU1200_DSCR_CMD0_PSC1_TX,
 749                .end    = AU1200_DSCR_CMD0_PSC1_TX,
 750                .flags  = IORESOURCE_DMA,
 751        },
 752        [3] = {
 753                .start  = AU1200_DSCR_CMD0_PSC1_RX,
 754                .end    = AU1200_DSCR_CMD0_PSC1_RX,
 755                .flags  = IORESOURCE_DMA,
 756        },
 757};
 758
 759/* AC97 or I2S device */
 760static struct platform_device db1200_audio_dev = {
 761        /* name assigned later based on switch setting */
 762        .id             = 1,    /* PSC ID */
 763        .num_resources  = ARRAY_SIZE(au1200_psc1_res),
 764        .resource       = au1200_psc1_res,
 765};
 766
 767/* DB1200 ASoC card device */
 768static struct platform_device db1200_sound_dev = {
 769        /* name assigned later based on switch setting */
 770        .id             = 1,    /* PSC ID */
 771};
 772
 773static struct platform_device db1200_stac_dev = {
 774        .name           = "ac97-codec",
 775        .id             = 1,    /* on PSC1 */
 776};
 777
 778static struct platform_device db1200_audiodma_dev = {
 779        .name           = "au1xpsc-pcm",
 780        .id             = 1,    /* PSC ID */
 781};
 782
 783static struct platform_device *db1200_devs[] __initdata = {
 784        NULL,           /* PSC0, selected by S6.8 */
 785        &db1200_ide_dev,
 786        &db1200_mmc0_dev,
 787        &au1200_lcd_dev,
 788        &db1200_eth_dev,
 789        &db1200_nand_dev,
 790        &db1200_audiodma_dev,
 791        &db1200_audio_dev,
 792        &db1200_stac_dev,
 793        &db1200_sound_dev,
 794};
 795
 796static struct platform_device *pb1200_devs[] __initdata = {
 797        &pb1200_mmc1_dev,
 798};
 799
 800/* Some peripheral base addresses differ on the PB1200 */
 801static int __init pb1200_res_fixup(void)
 802{
 803        /* CPLD Revs earlier than 4 cause problems */
 804        if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
 805                printk(KERN_ERR "WARNING!!!\n");
 806                printk(KERN_ERR "WARNING!!!\n");
 807                printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n");
 808                printk(KERN_ERR "the board updated to latest revisions.\n");
 809                printk(KERN_ERR "This software will not work reliably\n");
 810                printk(KERN_ERR "on anything older than CPLD rev 4.!\n");
 811                printk(KERN_ERR "WARNING!!!\n");
 812                printk(KERN_ERR "WARNING!!!\n");
 813                return 1;
 814        }
 815
 816        db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
 817        db1200_nand_res[0].end   = PB1200_NAND_PHYS_ADDR + 0xff;
 818        db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
 819        db1200_ide_res[0].end   = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
 820        db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
 821        db1200_eth_res[0].end   = PB1200_ETH_PHYS_ADDR + 0xff;
 822        return 0;
 823}
 824
 825int __init db1200_dev_setup(void)
 826{
 827        unsigned long pfc;
 828        unsigned short sw;
 829        int swapped, bid;
 830        struct clk *c;
 831
 832        bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 833        if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
 834            (bid == BCSR_WHOAMI_PB1200_DDR2)) {
 835                if (pb1200_res_fixup())
 836                        return -ENODEV;
 837        }
 838
 839        /* GPIO7 is low-level triggered CPLD cascade */
 840        irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
 841        bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
 842
 843        /* SMBus/SPI on PSC0, Audio on PSC1 */
 844        pfc = alchemy_rdsys(AU1000_SYS_PINFUNC);
 845        pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
 846        pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
 847        pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
 848        alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
 849
 850        /* get 50MHz for I2C driver on PSC0 */
 851        c = clk_get(NULL, "psc0_intclk");
 852        if (!IS_ERR(c)) {
 853                pfc = clk_round_rate(c, 50000000);
 854                if ((pfc < 1) || (abs(50000000 - pfc) > 2500000))
 855                        pr_warn("DB1200: cant get I2C close to 50MHz\n");
 856                else
 857                        clk_set_rate(c, pfc);
 858                clk_prepare_enable(c);
 859                clk_put(c);
 860        }
 861
 862        /* insert/eject pairs: one of both is always screaming.  To avoid
 863         * issues they must not be automatically enabled when initially
 864         * requested.
 865         */
 866        irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
 867        irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
 868        irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
 869        irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
 870        irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
 871        irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
 872
 873        i2c_register_board_info(0, db1200_i2c_devs,
 874                                ARRAY_SIZE(db1200_i2c_devs));
 875        spi_register_board_info(db1200_spi_devs,
 876                                ARRAY_SIZE(db1200_i2c_devs));
 877
 878        /* SWITCHES:    S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
 879         *              S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
 880         *              or S12 on the PB1200.
 881         */
 882
 883        /* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
 884         * this pin is claimed by PSC0 (unused though, but pinmux doesn't
 885         * allow to free it without crippling the SPI interface).
 886         * As a result, in SPI mode, OTG simply won't work (PSC0 uses
 887         * it as an input pin which is pulled high on the boards).
 888         */
 889        pfc = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
 890
 891        /* switch off OTG VBUS supply */
 892        gpio_request(215, "otg-vbus");
 893        gpio_direction_output(215, 1);
 894
 895        printk(KERN_INFO "%s device configuration:\n", get_system_type());
 896
 897        sw = bcsr_read(BCSR_SWITCHES);
 898        if (sw & BCSR_SWITCHES_DIP_8) {
 899                db1200_devs[0] = &db1200_i2c_dev;
 900                bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
 901
 902                pfc |= (2 << 17);       /* GPIO2 block owns GPIO215 */
 903
 904                printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
 905                printk(KERN_INFO "   OTG port VBUS supply available!\n");
 906        } else {
 907                db1200_devs[0] = &db1200_spi_dev;
 908                bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX);
 909
 910                pfc |= (1 << 17);       /* PSC0 owns GPIO215 */
 911
 912                printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
 913                printk(KERN_INFO "   OTG port VBUS supply disabled\n");
 914        }
 915        alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
 916
 917        /* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
 918         * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
 919         */
 920        sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7;
 921        if (sw == BCSR_SWITCHES_DIP_8) {
 922                bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
 923                db1200_audio_dev.name = "au1xpsc_i2s";
 924                db1200_sound_dev.name = "db1200-i2s";
 925                printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
 926        } else {
 927                bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
 928                db1200_audio_dev.name = "au1xpsc_ac97";
 929                db1200_sound_dev.name = "db1200-ac97";
 930                printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
 931        }
 932
 933        /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
 934        __raw_writel(PSC_SEL_CLK_SERCLK,
 935            (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 936        wmb();
 937
 938        db1x_register_pcmcia_socket(
 939                AU1000_PCMCIA_ATTR_PHYS_ADDR,
 940                AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
 941                AU1000_PCMCIA_MEM_PHYS_ADDR,
 942                AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 943                AU1000_PCMCIA_IO_PHYS_ADDR,
 944                AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
 945                DB1200_PC0_INT, DB1200_PC0_INSERT_INT,
 946                /*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0);
 947
 948        db1x_register_pcmcia_socket(
 949                AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
 950                AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
 951                AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
 952                AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 953                AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 954                AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
 955                DB1200_PC1_INT, DB1200_PC1_INSERT_INT,
 956                /*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1);
 957
 958        swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
 959        db1x_register_norflash(64 << 20, 2, swapped);
 960
 961        platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
 962
 963        /* PB1200 is a DB1200 with a 2nd MMC and Camera connector */
 964        if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
 965            (bid == BCSR_WHOAMI_PB1200_DDR2))
 966                platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs));
 967
 968        return 0;
 969}
 970