1# SPDX-License-Identifier: GPL-2.0 2# Makefile for making ELF bootable images for booting on CHRP 3# using Open Firmware. 4# 5# Geert Uytterhoeven September 1997 6# 7# Based on coffboot by Paul Mackerras 8# Simplified for ppc64 by Todd Inglett 9# 10# NOTE: this code is built for 32 bit in ELF32 format even though 11# it packages a 64 bit kernel. We do this to simplify the 12# bootloader and increase compatibility with OpenFirmware. 13# 14# To this end we need to define BOOTCC, etc, as the tools 15# needed to build the 32 bit image. That's normally the same 16# compiler for the rest of the kernel, with the -m32 flag added. 17# To make it easier to setup a cross compiler, 18# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE 19# in the toplevel makefile. 20 21all: $(obj)/zImage 22 23compress-$(CONFIG_KERNEL_GZIP) := CONFIG_KERNEL_GZIP 24compress-$(CONFIG_KERNEL_XZ) := CONFIG_KERNEL_XZ 25 26ifdef CROSS32_COMPILE 27 BOOTCC := $(CROSS32_COMPILE)gcc 28 BOOTAR := $(CROSS32_COMPILE)ar 29else 30 BOOTCC := $(CC) 31 BOOTAR := $(AR) 32endif 33 34BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ 35 -fno-strict-aliasing -Os -msoft-float -pipe \ 36 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ 37 -D$(compress-y) 38 39ifdef CONFIG_PPC64_BOOT_WRAPPER 40BOOTCFLAGS += -m64 41else 42BOOTCFLAGS += -m32 43endif 44 45BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) 46 47ifdef CONFIG_CPU_BIG_ENDIAN 48BOOTCFLAGS += -mbig-endian 49else 50BOOTCFLAGS += -mlittle-endian 51BOOTCFLAGS += $(call cc-option,-mabi=elfv2) 52endif 53 54BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc 55 56BOOTARFLAGS := -cr$(KBUILD_ARFLAGS) 57 58ifdef CONFIG_DEBUG_INFO 59BOOTCFLAGS += -g 60endif 61 62ifeq ($(call cc-option-yn, -fstack-protector),y) 63BOOTCFLAGS += -fno-stack-protector 64endif 65 66BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) 67 68DTC_FLAGS ?= -p 1024 69 70$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 71$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 72$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 73$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 74$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 75$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 76$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 77$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 78$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 79$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 80$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 81 82# The pre-boot decompressors pull in a lot of kernel headers and other source 83# files. This creates a bit of a dependency headache since we need to copy 84# these files into the build dir, fix up any includes and ensure that dependent 85# files are copied in the right order. 86 87# these need to be seperate variables because they are copied out of different 88# directories in the kernel tree. Sure you COULd merge them, but it's a 89# cure-is-worse-than-disease situation. 90zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c 91zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c 92zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h 93zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h 94 95$(addprefix $(obj)/, decompress.o): \ 96 $(addprefix $(obj)/,$(zlib-decomp-y)) 97 98$(addprefix $(obj)/, $(zlib-decomp-y)): \ 99 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 100 $(addprefix $(obj)/,$(zlibheader-y)) \ 101 $(addprefix $(obj)/,$(zlib-y)) 102 103$(addprefix $(obj)/,$(zlib-y)): \ 104 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 105 $(addprefix $(obj)/,$(zlibheader-y)) 106 107libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c 108libfdtheader := fdt.h libfdt.h libfdt_internal.h 109 110$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \ 111 treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \ 112 $(addprefix $(obj)/,$(libfdtheader)) 113 114src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ 115 $(libfdt) libfdt-wrapper.c \ 116 ns16550.c serial.c simple_alloc.c div64.S util.S \ 117 elf_util.c $(zlib-y) devtree.c stdlib.c \ 118 oflib.c ofconsole.c cuboot.c 119 120src-wlib-$(CONFIG_PPC_MPC52XX) += mpc52xx-psc.c 121src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S opal.c 122ifndef CONFIG_PPC64_BOOT_WRAPPER 123src-wlib-y += crtsavres.S 124endif 125src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c 126src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c 127src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c 128src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c 129src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c 130src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c 131src-wlib-$(CONFIG_CPM) += cpm-serial.c 132 133src-plat-y := of.c epapr.c 134src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \ 135 treeboot-walnut.c cuboot-acadia.c \ 136 cuboot-kilauea.c simpleboot.c \ 137 virtex405-head.S virtex.c 138src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ 139 cuboot-bamboo.c cuboot-sam440ep.c \ 140 cuboot-sequoia.c cuboot-rainier.c \ 141 cuboot-taishan.c cuboot-katmai.c \ 142 cuboot-warp.c cuboot-yosemite.c \ 143 treeboot-iss4xx.c treeboot-currituck.c \ 144 treeboot-akebono.c \ 145 simpleboot.c fixed-head.S virtex.c 146src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c 147src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c 148src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c 149src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c 150src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c 151src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ 152 gamecube-head.S gamecube.c \ 153 wii-head.S wii.c holly.c \ 154 fixed-head.S mvme5100.c 155src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c 156src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c 157src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c 158src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S 159src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S 160src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S 161src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c 162 163src-wlib := $(sort $(src-wlib-y)) 164src-plat := $(sort $(src-plat-y)) 165src-boot := $(src-wlib) $(src-plat) empty.c 166 167src-boot := $(addprefix $(obj)/, $(src-boot)) 168obj-boot := $(addsuffix .o, $(basename $(src-boot))) 169obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) 170obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) 171obj-plat: $(libfdt) 172 173quiet_cmd_copy_kern_src = COPY $@ 174 cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ 175 176$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 177 $(call cmd,copy_kern_src) 178 179$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 180 $(call cmd,copy_kern_src) 181 182$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% 183 $(call cmd,copy_kern_src) 184 185$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% 186 $(call cmd,copy_kern_src) 187 188quiet_cmd_copy_libfdt = COPY $@ 189 cmd_copy_libfdt = cp $< $@ 190 191$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% 192 $(call cmd,copy_libfdt) 193 194$(obj)/empty.c: 195 $(Q)touch $@ 196 197$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S 198 $(Q)cp $< $@ 199 200clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ 201 $(zlib-decomp-) $(libfdt) $(libfdtheader) \ 202 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds 203 204quiet_cmd_bootcc = BOOTCC $@ 205 cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< 206 207quiet_cmd_bootas = BOOTAS $@ 208 cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< 209 210quiet_cmd_bootar = BOOTAR $@ 211 cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ 212 213$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE 214 $(call if_changed_dep,bootcc) 215$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE 216 $(Q)mkdir -p $(dir $@) 217 $(call if_changed_dep,bootcc) 218$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE 219 $(Q)mkdir -p $(dir $@) 220 $(call if_changed_dep,bootas) 221 222$(obj)/wrapper.a: $(obj-wlib) FORCE 223 $(call if_changed,bootar) 224 225hostprogs-y := addnote hack-coff mktree 226 227targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) 228extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ 229 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds 230 231dtstree := $(srctree)/$(src)/dts 232 233wrapper :=$(srctree)/$(src)/wrapper 234wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ 235 $(wrapper) FORCE 236 237############# 238# Bits for building various flavours of zImage 239 240ifneq ($(CROSS32_COMPILE),) 241CROSSWRAP := -C "$(CROSS32_COMPILE)" 242else 243ifneq ($(CROSS_COMPILE),) 244CROSSWRAP := -C "$(CROSS_COMPILE)" 245endif 246endif 247 248compressor-$(CONFIG_KERNEL_GZIP) := gz 249compressor-$(CONFIG_KERNEL_XZ) := xz 250 251# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd 252quiet_cmd_wrap = WRAP $@ 253 cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ 254 $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ 255 vmlinux 256 257image-$(CONFIG_PPC_PSERIES) += zImage.pseries 258image-$(CONFIG_PPC_POWERNV) += zImage.pseries 259image-$(CONFIG_PPC_MAPLE) += zImage.maple 260image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries 261image-$(CONFIG_PPC_PS3) += dtbImage.ps3 262image-$(CONFIG_PPC_CHRP) += zImage.chrp 263image-$(CONFIG_PPC_EFIKA) += zImage.chrp 264image-$(CONFIG_PPC_PMAC) += zImage.pmac 265image-$(CONFIG_PPC_HOLLY) += dtbImage.holly 266image-$(CONFIG_DEFAULT_UIMAGE) += uImage 267image-$(CONFIG_EPAPR_BOOT) += zImage.epapr 268 269# 270# Targets which embed a device tree blob 271# 272# Theses are default targets to build images which embed device tree blobs. 273# They are only required on boards which do not have FDT support in firmware. 274# Boards with newish u-boot firmware can use the uImage target above 275# 276 277# Board ports in arch/powerpc/platform/40x/Kconfig 278image-$(CONFIG_EP405) += dtbImage.ep405 279image-$(CONFIG_HOTFOOT) += cuImage.hotfoot 280image-$(CONFIG_WALNUT) += treeImage.walnut 281image-$(CONFIG_ACADIA) += cuImage.acadia 282image-$(CONFIG_OBS600) += uImage.obs600 283 284# Board ports in arch/powerpc/platform/44x/Kconfig 285image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony 286image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo 287image-$(CONFIG_SAM440EP) += cuImage.sam440ep 288image-$(CONFIG_SEQUOIA) += cuImage.sequoia 289image-$(CONFIG_RAINIER) += cuImage.rainier 290image-$(CONFIG_TAISHAN) += cuImage.taishan 291image-$(CONFIG_KATMAI) += cuImage.katmai 292image-$(CONFIG_WARP) += cuImage.warp 293image-$(CONFIG_YOSEMITE) += cuImage.yosemite 294image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ 295 treeImage.iss4xx-mpic 296image-$(CONFIG_CURRITUCK) += treeImage.currituck 297image-$(CONFIG_AKEBONO) += treeImage.akebono 298 299# Board ports in arch/powerpc/platform/8xx/Kconfig 300image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads 301image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads 302image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc 303image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ 304 dtbImage.adder875-redboot 305 306# Board ports in arch/powerpc/platform/52xx/Kconfig 307image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb 308image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb 309image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb 310 311# Board ports in arch/powerpc/platform/82xx/Kconfig 312image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads 313image-$(CONFIG_PQ2FADS) += cuImage.pq2fads 314image-$(CONFIG_EP8248E) += dtbImage.ep8248e 315 316# Board ports in arch/powerpc/platform/83xx/Kconfig 317image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds 318image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb 319image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ 320 cuImage.mpc8349emitxgp 321image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds 322image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds 323image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot 324 325# Board ports in arch/powerpc/platform/85xx/Kconfig 326image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads 327image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads 328image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ 329 cuImage.mpc8548cds_32b \ 330 cuImage.mpc8555cds 331image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds 332image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ 333 cuImage.mpc8572ds 334image-$(CONFIG_TQM8540) += cuImage.tqm8540 335image-$(CONFIG_TQM8541) += cuImage.tqm8541 336image-$(CONFIG_TQM8548) += cuImage.tqm8548 337image-$(CONFIG_TQM8555) += cuImage.tqm8555 338image-$(CONFIG_TQM8560) += cuImage.tqm8560 339image-$(CONFIG_SBC8548) += cuImage.sbc8548 340image-$(CONFIG_KSI8560) += cuImage.ksi8560 341 342# Board ports in arch/powerpc/platform/86xx/Kconfig 343image-$(CONFIG_MVME7100) += dtbImage.mvme7100 344 345# Board ports in arch/powerpc/platform/embedded6xx/Kconfig 346image-$(CONFIG_STORCENTER) += cuImage.storcenter 347image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 348image-$(CONFIG_GAMECUBE) += dtbImage.gamecube 349image-$(CONFIG_WII) += dtbImage.wii 350image-$(CONFIG_MVME5100) += dtbImage.mvme5100 351 352# Board port in arch/powerpc/platform/amigaone/Kconfig 353image-$(CONFIG_AMIGAONE) += cuImage.amigaone 354 355# For 32-bit powermacs, build the COFF and miboot images 356# as well as the ELF images. 357ifdef CONFIG_PPC32 358image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot 359endif 360 361# Allow extra targets to be added to the defconfig 362image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS)) 363 364initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) 365initrd-y := $(patsubst zImage%, zImage.initrd%, \ 366 $(patsubst dtbImage%, dtbImage.initrd%, \ 367 $(patsubst simpleImage%, simpleImage.initrd%, \ 368 $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) 369initrd-y := $(filter-out $(image-y), $(initrd-y)) 370targets += $(image-y) $(initrd-y) 371 372$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz 373 374# Don't put the ramdisk on the pattern rule; when its missing make will try 375# the pattern rule with less dependencies that also matches (even with the 376# hard dependency listed). 377$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE 378 $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) 379 380$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE 381 $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) 382 383# dtbImage% - a dtbImage is a zImage with an embedded device tree blob 384$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE 385 $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 386 387$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE 388 $(call if_changed,wrap,$*,,$(obj)/$*.dtb) 389 390# This cannot be in the root of $(src) as the zImage rule always adds a $(obj) 391# prefix 392$(obj)/vmlinux.strip: vmlinux 393 $(STRIP) -s -R .comment $< -o $@ 394 395$(obj)/uImage: vmlinux $(wrapperbits) FORCE 396 $(call if_changed,wrap,uboot) 397 398$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 399 $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 400 401$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 402 $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb) 403 404$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 405 $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 406 407$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 408 $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb) 409 410$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 411 $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 412 413$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 414 $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb) 415 416$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 417 $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 418 419$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 420 $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) 421 422# Rule to build device tree blobs 423$(obj)/%.dtb: $(src)/dts/%.dts FORCE 424 $(call if_changed_dep,dtc) 425 426$(obj)/%.dtb: $(src)/dts/fsl/%.dts FORCE 427 $(call if_changed_dep,dtc) 428 429# If there isn't a platform selected then just strip the vmlinux. 430ifeq (,$(image-y)) 431image-y := vmlinux.strip 432endif 433 434$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) 435 $(Q)rm -f $@; ln $< $@ 436$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) 437 $(Q)rm -f $@; ln $< $@ 438 439# Only install the vmlinux 440install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) 441 sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" 442 443# Install the vmlinux and other built boot targets. 444zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) 445 sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^ 446 447# anything not in $(targets) 448clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ 449 zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ 450 zImage.miboot zImage.pmac zImage.pseries \ 451 zImage.maple simpleImage.* otheros.bld 452 453# clean up files cached by wrapper 454clean-kernel-base := vmlinux.strip vmlinux.bin 455clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) 456clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) 457# If not absolute clean-files are relative to $(obj). 458clean-files += $(addprefix $(objtree)/, $(clean-kernel)) 459 460WRAPPER_OBJDIR := /usr/lib/kernel-wrapper 461WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts 462WRAPPER_BINDIR := /usr/sbin 463INSTALL := install 464 465extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) 466hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y)) 467wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper 468dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) 469 470all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) 471 472quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) 473 cmd_mkdir = mkdir -p $@ 474 475quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) 476 cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ 477 478quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) 479 cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ 480 481quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 482 cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ 483 484quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 485 cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ 486 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ 487 -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ 488 489 490$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): 491 $(call cmd,mkdir) 492 493$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) 494 $(call cmd,install) 495 496$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) 497 $(call cmd,install_exe) 498 499$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) 500 $(call cmd,install_dts) 501 502$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) 503 $(call cmd,install_wrapper) 504 505$(obj)/bootwrapper_install: $(all-installed) 506