/*
 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifndef __MTD_MTD_H__
#define __MTD_MTD_H__

#include <linux/types.h>
#include <linux/uio.h>
#include <linux/notifier.h>
#include <linux/device.h>
#include <linux/of.h>

#include <mtd/mtd-abi.h>

#include <asm/div64.h>

#define MTD_FAIL_ADDR_UNKNOWN -1LL

struct mtd_info;

/*
 * If the erase fails, fail_addr might indicate exactly which block failed. If
 * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
 * or was not specific to any particular block.
 */
struct erase_info {
        uint64_t addr;
        uint64_t len;
        uint64_t fail_addr;
};

struct mtd_erase_region_info {
        uint64_t offset;                /* At which this region starts, from the beginning of the MTD */
        uint32_t erasesize;             /* For this region */
        uint32_t numblocks;             /* Number of blocks of erasesize in this region */
        unsigned long *lockmap;         /* If keeping bitmap of locks */
};

/**
 * struct mtd_oob_ops - oob operation operands
 * @mode:       operation mode
 *
 * @len:        number of data bytes to write/read
 *
 * @retlen:     number of data bytes written/read
 *
 * @ooblen:     number of oob bytes to write/read
 * @oobretlen:  number of oob bytes written/read
 * @ooboffs:    offset of oob data in the oob area (only relevant when
 *              mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
 * @datbuf:     data buffer - if NULL only oob data are read/written
 * @oobbuf:     oob data buffer
 *
 * Note, some MTD drivers do not allow you to write more than one OOB area at
 * one go. If you try to do that on such an MTD device, -EINVAL will be
 * returned. If you want to make your implementation portable on all kind of MTD
 * devices you should split the write request into several sub-requests when the
 * request crosses a page boundary.
 */
struct mtd_oob_ops {
        unsigned int    mode;
        size_t          len;
        size_t          retlen;
        size_t          ooblen;
        size_t          oobretlen;
        uint32_t        ooboffs;
        uint8_t         *datbuf;
        uint8_t         *oobbuf;
};

#define MTD_MAX_OOBFREE_ENTRIES_LARGE   32
#define MTD_MAX_ECCPOS_ENTRIES_LARGE    640
/**
 * struct mtd_oob_region - oob region definition
 * @offset: region offset
 * @length: region length
 *
 * This structure describes a region of the OOB area, and is used
 * to retrieve ECC or free bytes sections.
 * Each section is defined by an offset within the OOB area and a
 * length.
 */
struct mtd_oob_region {
        u32 offset;
        u32 length;
};

/*
 * struct mtd_ooblayout_ops - NAND OOB layout operations
 * @ecc: function returning an ECC region in the OOB area.
 *       Should return -ERANGE if %section exceeds the total number of
 *       ECC sections.
 * @free: function returning a free region in the OOB area.
 *        Should return -ERANGE if %section exceeds the total number of
 *        free sections.
 */
struct mtd_ooblayout_ops {
        int (*ecc)(struct mtd_info *mtd, int section,
                   struct mtd_oob_region *oobecc);
        int (*free)(struct mtd_info *mtd, int section,
                    struct mtd_oob_region *oobfree);
};

/**
 * struct mtd_pairing_info - page pairing information
 *
 * @pair: pair id
 * @group: group id
 *
 * The term "pair" is used here, even though TLC NANDs might group pages by 3
 * (3 bits in a single cell). A pair should regroup all pages that are sharing
 * the same cell. Pairs are then indexed in ascending order.
 *
 * @group is defining the position of a page in a given pair. It can also be
 * seen as the bit position in the cell: page attached to bit 0 belongs to
 * group 0, page attached to bit 1 belongs to group 1, etc.
 *
 * Example:
 * The H27UCG8T2BTR-BC datasheet describes the following pairing scheme:
 *
 *              group-0         group-1
 *
 *  pair-0      page-0          page-4
 *  pair-1      page-1          page-5
 *  pair-2      page-2          page-8
 *  ...
 *  pair-127    page-251        page-255
 *
 *
 * Note that the "group" and "pair" terms were extracted from Samsung and
 * Hynix datasheets, and might be referenced under other names in other
 * datasheets (Micron is describing this concept as "shared pages").
 */
struct mtd_pairing_info {
        int pair;
        int group;
};

/**
 * struct mtd_pairing_scheme - page pairing scheme description
 *
 * @ngroups: number of groups. Should be related to the number of bits
 *           per cell.
 * @get_info: converts a write-unit (page number within an erase block) into
 *            mtd_pairing information (pair + group). This function should
 *            fill the info parameter based on the wunit index or return
 *            -EINVAL if the wunit parameter is invalid.
 * @get_wunit: converts pairing information into a write-unit (page) number.
 *             This function should return the wunit index pointed by the
 *             pairing information described in the info argument. It should
 *             return -EINVAL, if there's no wunit corresponding to the
 *             passed pairing information.
 *
 * See mtd_pairing_info documentation for a detailed explanation of the
 * pair and group concepts.
 *
 * The mtd_pairing_scheme structure provides a generic solution to represent
 * NAND page pairing scheme. Instead of exposing two big tables to do the
 * write-unit <-> (pair + group) conversions, we ask the MTD drivers to
 * implement the ->get_info() and ->get_wunit() functions.
 *
 * MTD users will then be able to query these information by using the
 * mtd_pairing_info_to_wunit() and mtd_wunit_to_pairing_info() helpers.
 *
 * @ngroups is here to help MTD users iterating over all the pages in a
 * given pair. This value can be retrieved by MTD users using the
 * mtd_pairing_groups() helper.
 *
 * Examples are given in the mtd_pairing_info_to_wunit() and
 * mtd_wunit_to_pairing_info() documentation.
 */
struct mtd_pairing_scheme {
        int ngroups;
        int (*get_info)(struct mtd_info *mtd, int wunit,
                        struct mtd_pairing_info *info);
        int (*get_wunit)(struct mtd_info *mtd,
                         const struct mtd_pairing_info *info);
};

struct module;  /* only needed for owner field in mtd_info */

/**
 * struct mtd_debug_info - debugging information for an MTD device.
 *
 * @dfs_dir: direntry object of the MTD device debugfs directory
 */
struct mtd_debug_info {
        struct dentry *dfs_dir;
};

struct mtd_info {
        u_char type;
        uint32_t flags;
        uint64_t size;   // Total size of the MTD

        /* "Major" erase size for the device. Naïve users may take this
         * to be the only erase size available, or may use the more detailed
         * information below if they desire
         */
        uint32_t erasesize;
        /* Minimal writable flash unit size. In case of NOR flash it is 1 (even
         * though individual bits can be cleared), in case of NAND flash it is
         * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
         * it is of ECC block size, etc. It is illegal to have writesize = 0.
         * Any driver registering a struct mtd_info must ensure a writesize of
         * 1 or larger.
         */
        uint32_t writesize;

        /*
         * Size of the write buffer used by the MTD. MTD devices having a write
         * buffer can write multiple writesize chunks at a time. E.g. while
         * writing 4 * writesize bytes to a device with 2 * writesize bytes
         * buffer the MTD driver can (but doesn't have to) do 2 writesize
         * operations, but not 4. Currently, all NANDs have writebufsize
         * equivalent to writesize (NAND page size). Some NOR flashes do have
         * writebufsize greater than writesize.
         */
        uint32_t writebufsize;

        uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
        uint32_t oobavail;  // Available OOB bytes per block

        /*
         * If erasesize is a power of 2 then the shift is stored in
         * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize.
         */
        unsigned int erasesize_shift;
        unsigned int writesize_shift;
        /* Masks based on erasesize_shift and writesize_shift */
        unsigned int erasesize_mask;
        unsigned int writesize_mask;

        /*
         * read ops return -EUCLEAN if max number of bitflips corrected on any
         * one region comprising an ecc step equals or exceeds this value.
         * Settable by driver, else defaults to ecc_strength.  User can override
         * in sysfs.  N.B. The meaning of the -EUCLEAN return code has changed;
         * see Documentation/ABI/testing/sysfs-class-mtd for more detail.
         */
        unsigned int bitflip_threshold;

        /* Kernel-only stuff starts here. */
        const char *name;
        int index;

        /* OOB layout description */
        const struct mtd_ooblayout_ops *ooblayout;

        /* NAND pairing scheme, only provided for MLC/TLC NANDs */
        const struct mtd_pairing_scheme *pairing;

        /* the ecc step size. */
        unsigned int ecc_step_size;

        /* max number of correctible bit errors per ecc step */
        unsigned int ecc_strength;

        /* Data for variable erase regions. If numeraseregions is zero,
         * it means that the whole device has erasesize as given above.
         */
        int numeraseregions;
        struct mtd_erase_region_info *eraseregions;

        /*
         * Do not call via these pointers, use corresponding mtd_*()
         * wrappers instead.
         */
        int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
        int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
                       size_t *retlen, void **virt, resource_size_t *phys);
        int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
        int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
                      size_t *retlen, u_char *buf);
        int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
                       size_t *retlen, const u_char *buf);
        int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len,
                             size_t *retlen, const u_char *buf);
        int (*_read_oob) (struct mtd_info *mtd, loff_t from,
                          struct mtd_oob_ops *ops);
        int (*_write_oob) (struct mtd_info *mtd, loff_t to,
                           struct mtd_oob_ops *ops);
        int (*_get_fact_prot_info) (struct mtd_info *mtd, size_t len,
                                    size_t *retlen, struct otp_info *buf);
        int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
                                    size_t len, size_t *retlen, u_char *buf);
        int (*_get_user_prot_info) (struct mtd_info *mtd, size_t len,
                                    size_t *retlen, struct otp_info *buf);
        int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
                                    size_t len, size_t *retlen, u_char *buf);
        int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
                                     size_t len, size_t *retlen, u_char *buf);
        int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
                                    size_t len);
        int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs,
                        unsigned long count, loff_t to, size_t *retlen);
        void (*_sync) (struct mtd_info *mtd);
        int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
        int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
        int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
        int (*_block_isreserved) (struct mtd_info *mtd, loff_t ofs);
        int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
        int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
        int (*_max_bad_blocks) (struct mtd_info *mtd, loff_t ofs, size_t len);
        int (*_suspend) (struct mtd_info *mtd);
        void (*_resume) (struct mtd_info *mtd);
        void (*_reboot) (struct mtd_info *mtd);
        /*
         * If the driver is something smart, like UBI, it may need to maintain
         * its own reference counting. The below functions are only for driver.
         */
        int (*_get_device) (struct mtd_info *mtd);
        void (*_put_device) (struct mtd_info *mtd);

        struct notifier_block reboot_notifier;  /* default mode before reboot */

        /* ECC status information */
        struct mtd_ecc_stats ecc_stats;
        /* Subpage shift (NAND) */
        int subpage_sft;

        void *priv;

        struct module *owner;
        struct device dev;
        int usecount;
        struct mtd_debug_info dbg;
};

int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
                      struct mtd_oob_region *oobecc);
int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
                                 int *section,
                                 struct mtd_oob_region *oobregion);
int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf,
                               const u8 *oobbuf, int start, int nbytes);
int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf,
                               u8 *oobbuf, int start, int nbytes);
int mtd_ooblayout_free(struct mtd_info *mtd, int section,
                       struct mtd_oob_region *oobfree);
int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf,
                                const u8 *oobbuf, int start, int nbytes);
int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf,
                                u8 *oobbuf, int start, int nbytes);
int mtd_ooblayout_count_freebytes(struct mtd_info *mtd);
int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd);

static inline void mtd_set_ooblayout(struct mtd_info *mtd,
                                     const struct mtd_ooblayout_ops *ooblayout)
{
        mtd->ooblayout = ooblayout;
}

static inline void mtd_set_pairing_scheme(struct mtd_info *mtd,
                                const struct mtd_pairing_scheme *pairing)
{
        mtd->pairing = pairing;
}

static inline void mtd_set_of_node(struct mtd_info *mtd,
                                   struct device_node *np)
{
        mtd->dev.of_node = np;
        if (!mtd->name)
                of_property_read_string(np, "label", &mtd->name);
}

static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
{
        return dev_of_node(&mtd->dev);
}

static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
{
        return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
}

static inline int mtd_max_bad_blocks(struct mtd_info *mtd,
                                     loff_t ofs, size_t len)
{
        if (!mtd->_max_bad_blocks)
                return -ENOTSUPP;

        if (mtd->size < (len + ofs) || ofs < 0)
                return -EINVAL;

        return mtd->_max_bad_blocks(mtd, ofs, len);
}

int mtd_wunit_to_pairing_info(struct mtd_info *mtd, int wunit,
                              struct mtd_pairing_info *info);
int mtd_pairing_info_to_wunit(struct mtd_info *mtd,
                              const struct mtd_pairing_info *info);
int mtd_pairing_groups(struct mtd_info *mtd);
int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
              void **virt, resource_size_t *phys);
int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
                                    unsigned long offset, unsigned long flags);
int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
             u_char *buf);
int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
              const u_char *buf);
int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
                    const u_char *buf);

int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops);

int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
                           struct otp_info *buf);
int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
                           size_t *retlen, u_char *buf);
int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
                           struct otp_info *buf);
int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
                           size_t *retlen, u_char *buf);
int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
                            size_t *retlen, u_char *buf);
int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);

int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
               unsigned long count, loff_t to, size_t *retlen);

static inline void mtd_sync(struct mtd_info *mtd)
{
        if (mtd->_sync)
                mtd->_sync(mtd);
}

int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs);
int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);

static inline int mtd_suspend(struct mtd_info *mtd)
{
        return mtd->_suspend ? mtd->_suspend(mtd) : 0;
}

static inline void mtd_resume(struct mtd_info *mtd)
{
        if (mtd->_resume)
                mtd->_resume(mtd);
}

static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
{
        if (mtd->erasesize_shift)
                return sz >> mtd->erasesize_shift;
        do_div(sz, mtd->erasesize);
        return sz;
}

static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
{
        if (mtd->erasesize_shift)
                return sz & mtd->erasesize_mask;
        return do_div(sz, mtd->erasesize);
}

/**
 * mtd_align_erase_req - Adjust an erase request to align things on eraseblock
 *                       boundaries.
 * @mtd: the MTD device this erase request applies on
 * @req: the erase request to adjust
 *
 * This function will adjust @req->addr and @req->len to align them on
 * @mtd->erasesize. Of course we expect @mtd->erasesize to be != 0.
 */
static inline void mtd_align_erase_req(struct mtd_info *mtd,
                                       struct erase_info *req)
{
        u32 mod;

        if (WARN_ON(!mtd->erasesize))
                return;

        mod = mtd_mod_by_eb(req->addr, mtd);
        if (mod) {
                req->addr -= mod;
                req->len += mod;
        }

        mod = mtd_mod_by_eb(req->addr + req->len, mtd);
        if (mod)
                req->len += mtd->erasesize - mod;
}

static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
{
        if (mtd->writesize_shift)
                return sz >> mtd->writesize_shift;
        do_div(sz, mtd->writesize);
        return sz;
}

static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
{
        if (mtd->writesize_shift)
                return sz & mtd->writesize_mask;
        return do_div(sz, mtd->writesize);
}

static inline int mtd_wunit_per_eb(struct mtd_info *mtd)
{
        return mtd->erasesize / mtd->writesize;
}

static inline int mtd_offset_to_wunit(struct mtd_info *mtd, loff_t offs)
{
        return mtd_div_by_ws(mtd_mod_by_eb(offs, mtd), mtd);
}

static inline loff_t mtd_wunit_to_offset(struct mtd_info *mtd, loff_t base,
                                         int wunit)
{
        return base + (wunit * mtd->writesize);
}


static inline int mtd_has_oob(const struct mtd_info *mtd)
{
        return mtd->_read_oob && mtd->_write_oob;
}

static inline int mtd_type_is_nand(const struct mtd_info *mtd)
{
        return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
}

static inline int mtd_can_have_bb(const struct mtd_info *mtd)
{
        return !!mtd->_block_isbad;
}

        /* Kernel-side ioctl definitions */

struct mtd_partition;
struct mtd_part_parser_data;

extern int mtd_device_parse_register(struct mtd_info *mtd,
                                     const char * const *part_probe_types,
                                     struct mtd_part_parser_data *parser_data,
                                     const struct mtd_partition *defparts,
                                     int defnr_parts);
#define mtd_device_register(master, parts, nr_parts)    \
        mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
extern int mtd_device_unregister(struct mtd_info *master);
extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
extern int __get_mtd_device(struct mtd_info *mtd);
extern void __put_mtd_device(struct mtd_info *mtd);
extern struct mtd_info *get_mtd_device_nm(const char *name);
extern void put_mtd_device(struct mtd_info *mtd);


struct mtd_notifier {
        void (*add)(struct mtd_info *mtd);
        void (*remove)(struct mtd_info *mtd);
        struct list_head list;
};


extern void register_mtd_user (struct mtd_notifier *new);
extern int unregister_mtd_user (struct mtd_notifier *old);
void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);

static inline int mtd_is_bitflip(int err) {
        return err == -EUCLEAN;
}

static inline int mtd_is_eccerr(int err) {
        return err == -EBADMSG;
}

static inline int mtd_is_bitflip_or_eccerr(int err) {
        return mtd_is_bitflip(err) || mtd_is_eccerr(err);
}

unsigned mtd_mmap_capabilities(struct mtd_info *mtd);

#endif /* __MTD_MTD_H__ */