1/* MN10300 On-chip serial port driver definitions 2 * 3 * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. 4 * Written by David Howells (dhowells@redhat.com) 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public Licence 8 * as published by the Free Software Foundation; either version 9 * 2 of the Licence, or (at your option) any later version. 10 */ 11#ifndef _MN10300_SERIAL_H 12#define _MN10300_SERIAL_H 13 14#ifndef __ASSEMBLY__ 15#include <linux/serial_core.h> 16#include <linux/termios.h> 17#endif 18 19#include <asm/page.h> 20#include <asm/serial-regs.h> 21 22#define NR_PORTS 3 /* should be set 3 or 9 or 16 */ 23 24#define MNSC_BUFFER_SIZE +(PAGE_SIZE / 2) 25 26/* intr_flags bits */ 27#define MNSCx_RX_AVAIL 0x01 28#define MNSCx_RX_OVERF 0x02 29#define MNSCx_TX_SPACE 0x04 30#define MNSCx_TX_EMPTY 0x08 31 32/* tx_flags bits */ 33#define MNSCx_TX_BREAK 0x01 34#define MNSCx_TX_STOP 0x02 35 36#ifndef __ASSEMBLY__ 37 38struct mn10300_serial_port { 39 char *rx_buffer; /* reception buffer base */ 40 unsigned rx_inp; /* pointer to rx input offset */ 41 unsigned rx_outp; /* pointer to rx output offset */ 42 u8 tx_xchar; /* high-priority XON/XOFF buffer */ 43 u8 tx_flags; /* transmit break/stop request */ 44 u8 intr_flags; /* interrupt flags */ 45 volatile u16 *rx_icr; /* Rx interrupt control register */ 46 volatile u16 *tx_icr; /* Tx interrupt control register */ 47 int rx_irq; /* reception IRQ */ 48 int tx_irq; /* transmission IRQ */ 49 int tm_irq; /* timer IRQ */ 50 51 const char *name; /* name of serial port */ 52 const char *rx_name; /* Rx interrupt handler name of serial port */ 53 const char *tx_name; /* Tx interrupt handler name of serial port */ 54 const char *tm_name; /* Timer interrupt handler name */ 55 unsigned short type; /* type of serial port */ 56 unsigned char isconsole; /* T if it's a console */ 57 volatile void *_iobase; /* pointer to base of I/O control regs */ 58 volatile u16 *_control; /* control register pointer */ 59 volatile u8 *_status; /* status register pointer */ 60 volatile u8 *_intr; /* interrupt register pointer */ 61 volatile u8 *_rxb; /* receive buffer register pointer */ 62 volatile u8 *_txb; /* transmit buffer register pointer */ 63 volatile u16 *_tmicr; /* timer interrupt control register */ 64 volatile u8 *_tmxmd; /* baud rate timer mode register */ 65 volatile u16 *_tmxbr; /* baud rate timer base register */ 66 67 /* this must come down here so that assembly can use BSET to access the 68 * above fields */ 69 struct uart_port uart; 70 71 unsigned short rx_brk; /* current break reception status */ 72 u16 tx_cts; /* current CTS status */ 73 int gdbstub; /* preemptively stolen by GDB stub */ 74 75 u8 clock_src; /* clock source */ 76#define MNSCx_CLOCK_SRC_IOCLK 0 77#define MNSCx_CLOCK_SRC_IOBCLK 1 78 79 u8 div_timer; /* timer used as divisor */ 80#define MNSCx_DIV_TIMER_16BIT 0 81#define MNSCx_DIV_TIMER_8BIT 1 82 83 u16 options; /* options */ 84#define MNSCx_OPT_CTS 0x0001 85 86 unsigned long ioclk; /* base clock rate */ 87}; 88 89#ifdef CONFIG_MN10300_TTYSM0 90extern struct mn10300_serial_port mn10300_serial_port_sif0; 91#endif 92 93#ifdef CONFIG_MN10300_TTYSM1 94extern struct mn10300_serial_port mn10300_serial_port_sif1; 95#endif 96 97#ifdef CONFIG_MN10300_TTYSM2 98extern struct mn10300_serial_port mn10300_serial_port_sif2; 99#endif 100 101extern struct mn10300_serial_port *mn10300_serial_ports[]; 102 103struct mn10300_serial_int { 104 struct mn10300_serial_port *port; 105 asmlinkage void (*vdma)(void); 106}; 107 108extern struct mn10300_serial_int mn10300_serial_int_tbl[]; 109 110extern asmlinkage void mn10300_serial_vdma_interrupt(void); 111extern asmlinkage void mn10300_serial_vdma_rx_handler(void); 112extern asmlinkage void mn10300_serial_vdma_tx_handler(void); 113 114#endif /* __ASSEMBLY__ */ 115 116#if defined(CONFIG_GDBSTUB_ON_TTYSM0) 117#define SCgSTR SC0STR 118#define SCgRXB SC0RXB 119#define SCgRXIRQ SC0RXIRQ 120#elif defined(CONFIG_GDBSTUB_ON_TTYSM1) 121#define SCgSTR SC1STR 122#define SCgRXB SC1RXB 123#define SCgRXIRQ SC1RXIRQ 124#elif defined(CONFIG_GDBSTUB_ON_TTYSM2) 125#define SCgSTR SC2STR 126#define SCgRXB SC2RXB 127#define SCgRXIRQ SC2RXIRQ 128#endif 129 130#endif /* _MN10300_SERIAL_H */ 131