LXR linux/arch/sparc/kernel/syscalls.S

   1        /* SunOS's execv() call only specifies the argv argument, the
   2         * environment settings are the same as the calling processes.
   3         */
   4sys64_execve:
   5        set     sys_execve, %g1
   6        jmpl    %g1, %g0
   7         flushw
   8
   9sys64_execveat:
  10        set     sys_execveat, %g1
  11        jmpl    %g1, %g0
  12         flushw
  13
  14#ifdef CONFIG_COMPAT
  15sunos_execv:
  16        mov     %g0, %o2
  17sys32_execve:
  18        set     compat_sys_execve, %g1
  19        jmpl    %g1, %g0
  20         flushw
  21
  22sys32_execveat:
  23        set     compat_sys_execveat, %g1
  24        jmpl    %g1, %g0
  25         flushw
  26#endif
  27
  28        .align  32
  29sys_sparc_pipe:
  30        ba,pt   %xcc, sys_sparc_pipe_real
  31         add    %sp, PTREGS_OFF, %o0
  32sys_nis_syscall:
  33        ba,pt   %xcc, c_sys_nis_syscall
  34         add    %sp, PTREGS_OFF, %o0
  35sys_memory_ordering:
  36        ba,pt   %xcc, sparc_memory_ordering
  37         add    %sp, PTREGS_OFF, %o1
  38#ifdef CONFIG_COMPAT
  39sys32_sigstack:
  40        ba,pt   %xcc, do_sys32_sigstack
  41         mov    %i6, %o2
  42#endif
  43        .align  32
  44#ifdef CONFIG_COMPAT
  45sys32_sigreturn:
  46        add     %sp, PTREGS_OFF, %o0
  47        call    do_sigreturn32
  48         add    %o7, 1f-.-4, %o7
  49        nop
  50#endif
  51sys_rt_sigreturn:
  52        add     %sp, PTREGS_OFF, %o0
  53        call    do_rt_sigreturn
  54         add    %o7, 1f-.-4, %o7
  55        nop
  56#ifdef CONFIG_COMPAT
  57sys32_rt_sigreturn:
  58        add     %sp, PTREGS_OFF, %o0
  59        call    do_rt_sigreturn32
  60         add    %o7, 1f-.-4, %o7
  61        nop
  62#endif
  63        .align  32
  641:      ldx     [%g6 + TI_FLAGS], %l5
  65        andcc   %l5, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0
  66        be,pt   %icc, rtrap
  67         nop
  68        call    syscall_trace_leave
  69         add    %sp, PTREGS_OFF, %o0
  70        ba,pt   %xcc, rtrap
  71         nop
  72
  73        /* This is how fork() was meant to be done, 8 instruction entry.
  74         *
  75         * I questioned the following code briefly, let me clear things
  76         * up so you must not reason on it like I did.
  77         *
  78         * Know the fork_kpsr etc. we use in the sparc32 port?  We don't
  79         * need it here because the only piece of window state we copy to
  80         * the child is the CWP register.  Even if the parent sleeps,
  81         * we are safe because we stuck it into pt_regs of the parent
  82         * so it will not change.
  83         *
  84         * XXX This raises the question, whether we can do the same on
  85         * XXX sparc32 to get rid of fork_kpsr _and_ fork_kwim.  The
  86         * XXX answer is yes.  We stick fork_kpsr in UREG_G0 and
  87         * XXX fork_kwim in UREG_G1 (global registers are considered
  88         * XXX volatile across a system call in the sparc ABI I think
  89         * XXX if it isn't we can use regs->y instead, anyone who depends
  90         * XXX upon the Y register being preserved across a fork deserves
  91         * XXX to lose).
  92         *
  93         * In fact we should take advantage of that fact for other things
  94         * during system calls...
  95         */
  96        .align  32
  97sys_vfork: /* Under Linux, vfork and fork are just special cases of clone. */
  98        sethi   %hi(0x4000 | 0x0100 | SIGCHLD), %o0
  99        or      %o0, %lo(0x4000 | 0x0100 | SIGCHLD), %o0
 100        ba,pt   %xcc, sys_clone
 101sys_fork:
 102         clr    %o1
 103        mov     SIGCHLD, %o0
 104sys_clone:
 105        flushw
 106        movrz   %o1, %fp, %o1
 107        mov     0, %o3
 108        ba,pt   %xcc, sparc_do_fork
 109         add    %sp, PTREGS_OFF, %o2
 110
 111        .globl  ret_from_fork
 112ret_from_fork:
 113        /* Clear current_thread_info()->new_child. */
 114        stb     %g0, [%g6 + TI_NEW_CHILD]
 115        call    schedule_tail
 116         mov    %g7, %o0
 117        ldx     [%sp + PTREGS_OFF + PT_V9_I0], %o0
 118        brnz,pt %o0, ret_sys_call
 119         ldx    [%g6 + TI_FLAGS], %l0
 120        ldx     [%sp + PTREGS_OFF + PT_V9_G1], %l1
 121        call    %l1
 122         ldx    [%sp + PTREGS_OFF + PT_V9_G2], %o0
 123        ba,pt   %xcc, ret_sys_call
 124         mov    0, %o0
 125
 126        .globl  sparc_exit_group
 127        .type   sparc_exit_group,#function
 128sparc_exit_group:
 129        sethi   %hi(sys_exit_group), %g7
 130        ba,pt   %xcc, 1f
 131         or     %g7, %lo(sys_exit_group), %g7
 132        .size   sparc_exit_group,.-sparc_exit_group
 133
 134        .globl  sparc_exit
 135        .type   sparc_exit,#function
 136sparc_exit:
 137        sethi   %hi(sys_exit), %g7
 138        or      %g7, %lo(sys_exit), %g7
 1391:      rdpr    %pstate, %g2
 140        wrpr    %g2, PSTATE_IE, %pstate
 141        rdpr    %otherwin, %g1
 142        rdpr    %cansave, %g3
 143        add     %g3, %g1, %g3
 144        wrpr    %g3, 0x0, %cansave
 145        wrpr    %g0, 0x0, %otherwin
 146        wrpr    %g2, 0x0, %pstate
 147        jmpl    %g7, %g0
 148         stb    %g0, [%g6 + TI_WSAVED]
 149        .size   sparc_exit,.-sparc_exit
 150
 151linux_sparc_ni_syscall:
 152        sethi   %hi(sys_ni_syscall), %l7
 153        ba,pt   %xcc, 4f
 154         or     %l7, %lo(sys_ni_syscall), %l7
 155
 156linux_syscall_trace32:
 157        call    syscall_trace_enter
 158         add    %sp, PTREGS_OFF, %o0
 159        brnz,pn %o0, 3f
 160         mov    -ENOSYS, %o0
 161        srl     %i0, 0, %o0
 162        srl     %i4, 0, %o4
 163        srl     %i1, 0, %o1
 164        srl     %i2, 0, %o2
 165        ba,pt   %xcc, 5f
 166         srl    %i3, 0, %o3
 167
 168linux_syscall_trace:
 169        call    syscall_trace_enter
 170         add    %sp, PTREGS_OFF, %o0
 171        brnz,pn %o0, 3f
 172         mov    -ENOSYS, %o0
 173        mov     %i0, %o0
 174        mov     %i1, %o1
 175        mov     %i2, %o2
 176        mov     %i3, %o3
 177        b,pt    %xcc, 2f
 178         mov    %i4, %o4
 179
 180
 181        /* Linux 32-bit system calls enter here... */
 182        .align  32
 183        .globl  linux_sparc_syscall32
 184linux_sparc_syscall32:
 185        /* Direct access to user regs, much faster. */
 186        cmp     %g1, NR_syscalls                        ! IEU1  Group
 187        bgeu,pn %xcc, linux_sparc_ni_syscall            ! CTI
 188         srl    %i0, 0, %o0                             ! IEU0
 189        sll     %g1, 2, %l4                             ! IEU0  Group
 190        srl     %i4, 0, %o4                             ! IEU1
 191        lduw    [%l7 + %l4], %l7                        ! Load
 192        srl     %i1, 0, %o1                             ! IEU0  Group
 193        ldx     [%g6 + TI_FLAGS], %l0           ! Load
 194
 195        srl     %i3, 0, %o3                             ! IEU0
 196        srl     %i2, 0, %o2                             ! IEU0  Group
 197        andcc   %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0
 198        bne,pn  %icc, linux_syscall_trace32             ! CTI
 199         mov    %i0, %l5                                ! IEU1
 2005:      call    %l7                                     ! CTI   Group brk forced
 201         srl    %i5, 0, %o5                             ! IEU1
 202        ba,pt   %xcc, 3f
 203         sra    %o0, 0, %o0
 204
 205        /* Linux native system calls enter here... */
 206        .align  32
 207        .globl  linux_sparc_syscall
 208linux_sparc_syscall:
 209        /* Direct access to user regs, much faster. */
 210        cmp     %g1, NR_syscalls                        ! IEU1  Group
 211        bgeu,pn %xcc, linux_sparc_ni_syscall            ! CTI
 212         mov    %i0, %o0                                ! IEU0
 213        sll     %g1, 2, %l4                             ! IEU0  Group
 214        mov     %i1, %o1                                ! IEU1
 215        lduw    [%l7 + %l4], %l7                        ! Load
 2164:      mov     %i2, %o2                                ! IEU0  Group
 217        ldx     [%g6 + TI_FLAGS], %l0           ! Load
 218
 219        mov     %i3, %o3                                ! IEU1
 220        mov     %i4, %o4                                ! IEU0  Group
 221        andcc   %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0
 222        bne,pn  %icc, linux_syscall_trace               ! CTI   Group
 223         mov    %i0, %l5                                ! IEU0
 2242:      call    %l7                                     ! CTI   Group brk forced
 225         mov    %i5, %o5                                ! IEU0
 226        nop
 227
 2283:      stx     %o0, [%sp + PTREGS_OFF + PT_V9_I0]
 229ret_sys_call:
 230        ldx     [%sp + PTREGS_OFF + PT_V9_TSTATE], %g3
 231        mov     %ulo(TSTATE_XCARRY | TSTATE_ICARRY), %g2
 232        sllx    %g2, 32, %g2
 233
 234        cmp     %o0, -ERESTART_RESTARTBLOCK
 235        bgeu,pn %xcc, 1f
 236         andcc  %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0
 237        ldx     [%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc
 238
 2392:
 240        /* System call success, clear Carry condition code. */
 241        andn    %g3, %g2, %g3
 2423:
 243        stx     %g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]  
 244        bne,pn  %icc, linux_syscall_trace2
 245         add    %l1, 0x4, %l2                   ! npc = npc+4
 246        stx     %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
 247        ba,pt   %xcc, rtrap
 248         stx    %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
 249
 2501:
 251        /* Check if force_successful_syscall_return()
 252         * was invoked.
 253         */
 254        ldub    [%g6 + TI_SYS_NOERROR], %l2
 255        brnz,pn %l2, 2b
 256         ldx    [%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc
 257        /* System call failure, set Carry condition code.
 258         * Also, get abs(errno) to return to the process.
 259         */
 260        sub     %g0, %o0, %o0
 261        stx     %o0, [%sp + PTREGS_OFF + PT_V9_I0]
 262        ba,pt   %xcc, 3b
 263         or     %g3, %g2, %g3
 264
 265linux_syscall_trace2:
 266        call    syscall_trace_leave
 267         add    %sp, PTREGS_OFF, %o0
 268        stx     %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
 269        ba,pt   %xcc, rtrap
 270         stx    %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
 271