linux/drivers/scsi/libsas/sas_internal.h
<<
>>
Prefs
   1/*
   2 * Serial Attached SCSI (SAS) class internal header file
   3 *
   4 * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
   5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
   6 *
   7 * This file is licensed under GPLv2.
   8 *
   9 * This program is free software; you can redistribute it and/or
  10 * modify it under the terms of the GNU General Public License as
  11 * published by the Free Software Foundation; either version 2 of the
  12 * License, or (at your option) any later version.
  13 *
  14 * This program is distributed in the hope that it will be useful, but
  15 * WITHOUT ANY WARRANTY; without even the implied warranty of
  16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17 * General Public License for more details.
  18 *
  19 * You should have received a copy of the GNU General Public License
  20 * along with this program; if not, write to the Free Software
  21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  22 * USA
  23 *
  24 */
  25
  26#ifndef _SAS_INTERNAL_H_
  27#define _SAS_INTERNAL_H_
  28
  29#include <scsi/scsi.h>
  30#include <scsi/scsi_host.h>
  31#include <scsi/scsi_transport_sas.h>
  32#include <scsi/libsas.h>
  33#include <scsi/sas_ata.h>
  34
  35#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
  36
  37#define SAS_DPRINTK(fmt, ...) printk(KERN_DEBUG "sas: " fmt, ## __VA_ARGS__)
  38
  39#define TO_SAS_TASK(_scsi_cmd)  ((void *)(_scsi_cmd)->host_scribble)
  40#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
  41
  42struct sas_phy_data {
  43        /* let reset be performed in sas_queue_work() context */
  44        struct sas_phy *phy;
  45        struct mutex event_lock;
  46        int hard_reset;
  47        int reset_result;
  48        struct sas_work reset_work;
  49        int enable;
  50        int enable_result;
  51        struct sas_work enable_work;
  52};
  53
  54void sas_scsi_recover_host(struct Scsi_Host *shost);
  55
  56int sas_show_class(enum sas_class class, char *buf);
  57int sas_show_proto(enum sas_protocol proto, char *buf);
  58int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
  59int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
  60
  61int  sas_register_phys(struct sas_ha_struct *sas_ha);
  62void sas_unregister_phys(struct sas_ha_struct *sas_ha);
  63
  64int  sas_register_ports(struct sas_ha_struct *sas_ha);
  65void sas_unregister_ports(struct sas_ha_struct *sas_ha);
  66
  67enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
  68
  69int  sas_init_events(struct sas_ha_struct *sas_ha);
  70void sas_disable_revalidation(struct sas_ha_struct *ha);
  71void sas_enable_revalidation(struct sas_ha_struct *ha);
  72void __sas_drain_work(struct sas_ha_struct *ha);
  73
  74void sas_deform_port(struct asd_sas_phy *phy, int gone);
  75
  76void sas_porte_bytes_dmaed(struct work_struct *work);
  77void sas_porte_broadcast_rcvd(struct work_struct *work);
  78void sas_porte_link_reset_err(struct work_struct *work);
  79void sas_porte_timer_event(struct work_struct *work);
  80void sas_porte_hard_reset(struct work_struct *work);
  81void sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw);
  82
  83int sas_notify_lldd_dev_found(struct domain_device *);
  84void sas_notify_lldd_dev_gone(struct domain_device *);
  85
  86int sas_smp_phy_control(struct domain_device *dev, int phy_id,
  87                        enum phy_func phy_func, struct sas_phy_linkrates *);
  88int sas_smp_get_phy_events(struct sas_phy *phy);
  89
  90void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event);
  91void sas_device_set_phy(struct domain_device *dev, struct sas_port *port);
  92struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
  93struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id);
  94int sas_ex_phy_discover(struct domain_device *dev, int single);
  95int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
  96                            struct smp_resp *rps_resp);
  97int sas_try_ata_reset(struct asd_sas_phy *phy);
  98void sas_hae_reset(struct work_struct *work);
  99
 100void sas_free_device(struct kref *kref);
 101
 102#ifdef CONFIG_SCSI_SAS_HOST_SMP
 103extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
 104                                struct request *rsp);
 105#else
 106static inline int sas_smp_host_handler(struct Scsi_Host *shost,
 107                                       struct request *req,
 108                                       struct request *rsp)
 109{
 110        shost_printk(KERN_ERR, shost,
 111                "Cannot send SMP to a sas host (not enabled in CONFIG)\n");
 112        return -EINVAL;
 113}
 114#endif
 115
 116static inline void sas_fail_probe(struct domain_device *dev, const char *func, int err)
 117{
 118        SAS_DPRINTK("%s: for %s device %16llx returned %d\n",
 119                    func, dev->parent ? "exp-attached" :
 120                                            "direct-attached",
 121                    SAS_ADDR(dev->sas_addr), err);
 122        sas_unregister_dev(dev->port, dev);
 123}
 124
 125static inline void sas_fill_in_rphy(struct domain_device *dev,
 126                                    struct sas_rphy *rphy)
 127{
 128        rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
 129        rphy->identify.initiator_port_protocols = dev->iproto;
 130        rphy->identify.target_port_protocols = dev->tproto;
 131        switch (dev->dev_type) {
 132        case SAS_SATA_DEV:
 133                /* FIXME: need sata device type */
 134        case SAS_END_DEVICE:
 135        case SAS_SATA_PENDING:
 136                rphy->identify.device_type = SAS_END_DEVICE;
 137                break;
 138        case SAS_EDGE_EXPANDER_DEVICE:
 139                rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
 140                break;
 141        case SAS_FANOUT_EXPANDER_DEVICE:
 142                rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
 143                break;
 144        default:
 145                rphy->identify.device_type = SAS_PHY_UNUSED;
 146                break;
 147        }
 148}
 149
 150static inline void sas_phy_set_target(struct asd_sas_phy *p, struct domain_device *dev)
 151{
 152        struct sas_phy *phy = p->phy;
 153
 154        if (dev) {
 155                if (dev_is_sata(dev))
 156                        phy->identify.device_type = SAS_END_DEVICE;
 157                else
 158                        phy->identify.device_type = dev->dev_type;
 159                phy->identify.target_port_protocols = dev->tproto;
 160        } else {
 161                phy->identify.device_type = SAS_PHY_UNUSED;
 162                phy->identify.target_port_protocols = 0;
 163        }
 164}
 165
 166static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
 167{
 168        struct expander_device *ex = &dev->ex_dev;
 169        struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
 170
 171        if (!ex->parent_port) {
 172                ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
 173                /* FIXME: error handling */
 174                BUG_ON(!ex->parent_port);
 175                BUG_ON(sas_port_add(ex->parent_port));
 176                sas_port_mark_backlink(ex->parent_port);
 177        }
 178        sas_port_add_phy(ex->parent_port, ex_phy->phy);
 179}
 180
 181static inline struct domain_device *sas_alloc_device(void)
 182{
 183        struct domain_device *dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 184
 185        if (dev) {
 186                INIT_LIST_HEAD(&dev->siblings);
 187                INIT_LIST_HEAD(&dev->dev_list_node);
 188                INIT_LIST_HEAD(&dev->disco_list_node);
 189                kref_init(&dev->kref);
 190                spin_lock_init(&dev->done_lock);
 191        }
 192        return dev;
 193}
 194
 195static inline void sas_put_device(struct domain_device *dev)
 196{
 197        kref_put(&dev->kref, sas_free_device);
 198}
 199
 200#endif /* _SAS_INTERNAL_H_ */
 201