1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/tty.h>
15#include <linux/tty_flip.h>
16#include <linux/module.h>
17#include <linux/usb.h>
18#include <linux/usb/serial.h>
19#include <linux/slab.h>
20#include "usb-wwan.h"
21
22#define DRIVER_AUTHOR "Qualcomm Inc"
23#define DRIVER_DESC "Qualcomm USB Serial driver"
24
25
26enum qcserial_layouts {
27 QCSERIAL_G2K = 0,
28 QCSERIAL_G1K = 1,
29 QCSERIAL_SWI = 2,
30 QCSERIAL_HWI = 3,
31};
32
33#define DEVICE_G1K(v, p) \
34 USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
35#define DEVICE_SWI(v, p) \
36 USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
37#define DEVICE_HWI(v, p) \
38 USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI
39
40static const struct usb_device_id id_table[] = {
41
42 {DEVICE_G1K(0x05c6, 0x9211)},
43 {DEVICE_G1K(0x05c6, 0x9212)},
44 {DEVICE_G1K(0x03f0, 0x1f1d)},
45 {DEVICE_G1K(0x03f0, 0x201d)},
46 {DEVICE_G1K(0x04da, 0x250d)},
47 {DEVICE_G1K(0x04da, 0x250c)},
48 {DEVICE_G1K(0x413c, 0x8172)},
49 {DEVICE_G1K(0x413c, 0x8171)},
50 {DEVICE_G1K(0x1410, 0xa001)},
51 {DEVICE_G1K(0x1410, 0xa002)},
52 {DEVICE_G1K(0x1410, 0xa003)},
53 {DEVICE_G1K(0x1410, 0xa004)},
54 {DEVICE_G1K(0x1410, 0xa005)},
55 {DEVICE_G1K(0x1410, 0xa006)},
56 {DEVICE_G1K(0x1410, 0xa007)},
57 {DEVICE_G1K(0x1410, 0xa008)},
58 {DEVICE_G1K(0x0b05, 0x1776)},
59 {DEVICE_G1K(0x0b05, 0x1774)},
60 {DEVICE_G1K(0x19d2, 0xfff3)},
61 {DEVICE_G1K(0x19d2, 0xfff2)},
62 {DEVICE_G1K(0x1557, 0x0a80)},
63 {DEVICE_G1K(0x05c6, 0x9001)},
64 {DEVICE_G1K(0x05c6, 0x9002)},
65 {DEVICE_G1K(0x05c6, 0x9202)},
66 {DEVICE_G1K(0x05c6, 0x9203)},
67 {DEVICE_G1K(0x05c6, 0x9222)},
68 {DEVICE_G1K(0x05c6, 0x9008)},
69 {DEVICE_G1K(0x05c6, 0x9009)},
70 {DEVICE_G1K(0x05c6, 0x9201)},
71 {DEVICE_G1K(0x05c6, 0x9221)},
72 {DEVICE_G1K(0x05c6, 0x9231)},
73 {DEVICE_G1K(0x1f45, 0x0001)},
74 {DEVICE_G1K(0x1bc7, 0x900e)},
75
76
77 {USB_DEVICE(0x1410, 0xa010)},
78 {USB_DEVICE(0x1410, 0xa011)},
79 {USB_DEVICE(0x1410, 0xa012)},
80 {USB_DEVICE(0x1410, 0xa013)},
81 {USB_DEVICE(0x1410, 0xa014)},
82 {USB_DEVICE(0x413c, 0x8185)},
83 {USB_DEVICE(0x413c, 0x8186)},
84 {USB_DEVICE(0x05c6, 0x9208)},
85 {USB_DEVICE(0x05c6, 0x920b)},
86 {USB_DEVICE(0x05c6, 0x9224)},
87 {USB_DEVICE(0x05c6, 0x9225)},
88 {USB_DEVICE(0x05c6, 0x9244)},
89 {USB_DEVICE(0x05c6, 0x9245)},
90 {USB_DEVICE(0x03f0, 0x241d)},
91 {USB_DEVICE(0x03f0, 0x251d)},
92 {USB_DEVICE(0x05c6, 0x9214)},
93 {USB_DEVICE(0x05c6, 0x9215)},
94 {USB_DEVICE(0x05c6, 0x9264)},
95 {USB_DEVICE(0x05c6, 0x9265)},
96 {USB_DEVICE(0x05c6, 0x9234)},
97 {USB_DEVICE(0x05c6, 0x9235)},
98 {USB_DEVICE(0x05c6, 0x9274)},
99 {USB_DEVICE(0x05c6, 0x9275)},
100 {USB_DEVICE(0x1199, 0x9000)},
101 {USB_DEVICE(0x1199, 0x9001)},
102 {USB_DEVICE(0x1199, 0x9002)},
103 {USB_DEVICE(0x1199, 0x9003)},
104 {USB_DEVICE(0x1199, 0x9004)},
105 {USB_DEVICE(0x1199, 0x9005)},
106 {USB_DEVICE(0x1199, 0x9006)},
107 {USB_DEVICE(0x1199, 0x9007)},
108 {USB_DEVICE(0x1199, 0x9008)},
109 {USB_DEVICE(0x1199, 0x9009)},
110 {USB_DEVICE(0x1199, 0x900a)},
111 {USB_DEVICE(0x1199, 0x9011)},
112 {USB_DEVICE(0x16d8, 0x8001)},
113 {USB_DEVICE(0x16d8, 0x8002)},
114 {USB_DEVICE(0x05c6, 0x9204)},
115 {USB_DEVICE(0x05c6, 0x9205)},
116
117
118 {USB_DEVICE(0x03f0, 0x371d)},
119 {USB_DEVICE(0x05c6, 0x920c)},
120 {USB_DEVICE(0x05c6, 0x920d)},
121 {USB_DEVICE(0x1410, 0xa020)},
122 {USB_DEVICE(0x1410, 0xa021)},
123 {USB_DEVICE(0x413c, 0x8193)},
124 {USB_DEVICE(0x413c, 0x8194)},
125 {USB_DEVICE(0x1199, 0x68a4)},
126 {USB_DEVICE(0x1199, 0x68a5)},
127 {USB_DEVICE(0x1199, 0x68a8)},
128 {USB_DEVICE(0x1199, 0x68a9)},
129 {USB_DEVICE(0x1199, 0x9010)},
130 {USB_DEVICE(0x1199, 0x9012)},
131 {USB_DEVICE(0x1199, 0x9013)},
132 {USB_DEVICE(0x1199, 0x9014)},
133 {USB_DEVICE(0x1199, 0x9015)},
134 {USB_DEVICE(0x1199, 0x9018)},
135 {USB_DEVICE(0x1199, 0x9019)},
136 {USB_DEVICE(0x1199, 0x901b)},
137 {USB_DEVICE(0x12D1, 0x14F0)},
138 {USB_DEVICE(0x12D1, 0x14F1)},
139 {USB_DEVICE(0x0AF0, 0x8120)},
140
141
142 {DEVICE_SWI(0x0f3d, 0x68a2)},
143 {DEVICE_SWI(0x114f, 0x68a2)},
144 {DEVICE_SWI(0x1199, 0x68a2)},
145 {DEVICE_SWI(0x1199, 0x901c)},
146 {DEVICE_SWI(0x1199, 0x901f)},
147 {DEVICE_SWI(0x1199, 0x9040)},
148 {DEVICE_SWI(0x1199, 0x9051)},
149 {DEVICE_SWI(0x1199, 0x9053)},
150 {DEVICE_SWI(0x1199, 0x9054)},
151 {DEVICE_SWI(0x1199, 0x9055)},
152 {DEVICE_SWI(0x1199, 0x9056)},
153 {DEVICE_SWI(0x1199, 0x9060)},
154 {DEVICE_SWI(0x1199, 0x9061)},
155 {DEVICE_SWI(0x413c, 0x81a2)},
156 {DEVICE_SWI(0x413c, 0x81a3)},
157 {DEVICE_SWI(0x413c, 0x81a4)},
158 {DEVICE_SWI(0x413c, 0x81a8)},
159 {DEVICE_SWI(0x413c, 0x81a9)},
160 {DEVICE_SWI(0x413c, 0x81b1)},
161
162
163 {DEVICE_HWI(0x03f0, 0x581d)},
164
165 { }
166};
167MODULE_DEVICE_TABLE(usb, id_table);
168
169static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
170{
171 struct usb_host_interface *intf = serial->interface->cur_altsetting;
172 struct device *dev = &serial->dev->dev;
173 int retval = -ENODEV;
174 __u8 nintf;
175 __u8 ifnum;
176 int altsetting = -1;
177
178 nintf = serial->dev->actconfig->desc.bNumInterfaces;
179 dev_dbg(dev, "Num Interfaces = %d\n", nintf);
180 ifnum = intf->desc.bInterfaceNumber;
181 dev_dbg(dev, "This Interface = %d\n", ifnum);
182
183 if (nintf == 1) {
184
185
186 if (serial->interface->num_altsetting == 2)
187 intf = &serial->interface->altsetting[1];
188 else if (serial->interface->num_altsetting > 2)
189 goto done;
190
191 if (intf->desc.bNumEndpoints == 2 &&
192 usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
193 usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
194 dev_dbg(dev, "QDL port found\n");
195
196 if (serial->interface->num_altsetting == 1)
197 retval = 0;
198 else
199 altsetting = 1;
200 }
201 goto done;
202
203 }
204
205
206 altsetting = 0;
207
208
209
210
211
212
213 switch (id->driver_info) {
214 case QCSERIAL_G1K:
215
216
217
218
219
220
221
222 if (nintf < 3 || nintf > 4) {
223 dev_err(dev, "unknown number of interfaces: %d\n", nintf);
224 altsetting = -1;
225 goto done;
226 }
227
228 if (ifnum == 0) {
229 dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
230 altsetting = 1;
231 } else if (ifnum == 2)
232 dev_dbg(dev, "Modem port found\n");
233 else
234 altsetting = -1;
235 break;
236 case QCSERIAL_G2K:
237
238
239
240
241
242
243
244 if (nintf < 3 || nintf > 4) {
245 dev_err(dev, "unknown number of interfaces: %d\n", nintf);
246 altsetting = -1;
247 goto done;
248 }
249
250 switch (ifnum) {
251 case 0:
252
253 altsetting = -1;
254 break;
255 case 1:
256 dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n");
257 break;
258 case 2:
259 dev_dbg(dev, "Modem port found\n");
260 break;
261 case 3:
262
263
264
265
266
267 dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
268 break;
269 }
270 break;
271 case QCSERIAL_SWI:
272
273
274
275
276
277
278
279 switch (ifnum) {
280 case 0:
281 dev_dbg(dev, "DM/DIAG interface found\n");
282 break;
283 case 2:
284 dev_dbg(dev, "NMEA GPS interface found\n");
285 break;
286 case 3:
287 dev_dbg(dev, "Modem port found\n");
288 break;
289 default:
290
291 altsetting = -1;
292 break;
293 }
294 break;
295 case QCSERIAL_HWI:
296
297
298
299
300
301
302
303
304
305 switch (ifnum) {
306 case 0:
307 case 2:
308 dev_dbg(dev, "Modem port found\n");
309 break;
310 case 1:
311 dev_dbg(dev, "DM/DIAG interface found\n");
312 break;
313 case 5:
314 dev_dbg(dev, "NMEA GPS interface found\n");
315 break;
316 default:
317
318 altsetting = -1;
319 break;
320 }
321 break;
322 default:
323 dev_err(dev, "unsupported device layout type: %lu\n",
324 id->driver_info);
325 break;
326 }
327
328done:
329 if (altsetting >= 0) {
330 retval = usb_set_interface(serial->dev, ifnum, altsetting);
331 if (retval < 0) {
332 dev_err(dev,
333 "Could not set interface, error %d\n",
334 retval);
335 retval = -ENODEV;
336 }
337 }
338
339 return retval;
340}
341
342static int qc_attach(struct usb_serial *serial)
343{
344 struct usb_wwan_intf_private *data;
345
346 data = kzalloc(sizeof(*data), GFP_KERNEL);
347 if (!data)
348 return -ENOMEM;
349
350 spin_lock_init(&data->susp_lock);
351
352 usb_set_serial_data(serial, data);
353
354 return 0;
355}
356
357static void qc_release(struct usb_serial *serial)
358{
359 struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
360
361 usb_set_serial_data(serial, NULL);
362 kfree(priv);
363}
364
365static struct usb_serial_driver qcdevice = {
366 .driver = {
367 .owner = THIS_MODULE,
368 .name = "qcserial",
369 },
370 .description = "Qualcomm USB modem",
371 .id_table = id_table,
372 .num_ports = 1,
373 .probe = qcprobe,
374 .open = usb_wwan_open,
375 .close = usb_wwan_close,
376 .write = usb_wwan_write,
377 .write_room = usb_wwan_write_room,
378 .chars_in_buffer = usb_wwan_chars_in_buffer,
379 .attach = qc_attach,
380 .release = qc_release,
381 .port_probe = usb_wwan_port_probe,
382 .port_remove = usb_wwan_port_remove,
383#ifdef CONFIG_PM
384 .suspend = usb_wwan_suspend,
385 .resume = usb_wwan_resume,
386#endif
387};
388
389static struct usb_serial_driver * const serial_drivers[] = {
390 &qcdevice, NULL
391};
392
393module_usb_serial_driver(serial_drivers, id_table);
394
395MODULE_AUTHOR(DRIVER_AUTHOR);
396MODULE_DESCRIPTION(DRIVER_DESC);
397MODULE_LICENSE("GPL v2");
398