linux/drivers/crypto/qat/qat_dh895xcc/adf_drv.c
<<
>>
Prefs
   1/*
   2  This file is provided under a dual BSD/GPLv2 license.  When using or
   3  redistributing this file, you may do so under either license.
   4
   5  GPL LICENSE SUMMARY
   6  Copyright(c) 2014 Intel Corporation.
   7  This program is free software; you can redistribute it and/or modify
   8  it under the terms of version 2 of the GNU General Public License as
   9  published by the Free Software Foundation.
  10
  11  This program is distributed in the hope that it will be useful, but
  12  WITHOUT ANY WARRANTY; without even the implied warranty of
  13  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14  General Public License for more details.
  15
  16  Contact Information:
  17  qat-linux@intel.com
  18
  19  BSD LICENSE
  20  Copyright(c) 2014 Intel Corporation.
  21  Redistribution and use in source and binary forms, with or without
  22  modification, are permitted provided that the following conditions
  23  are met:
  24
  25    * Redistributions of source code must retain the above copyright
  26      notice, this list of conditions and the following disclaimer.
  27    * Redistributions in binary form must reproduce the above copyright
  28      notice, this list of conditions and the following disclaimer in
  29      the documentation and/or other materials provided with the
  30      distribution.
  31    * Neither the name of Intel Corporation nor the names of its
  32      contributors may be used to endorse or promote products derived
  33      from this software without specific prior written permission.
  34
  35  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  36  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  37  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  38  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  39  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  40  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  41  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  42  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  43  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  44  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  45  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  46*/
  47#include <linux/kernel.h>
  48#include <linux/module.h>
  49#include <linux/pci.h>
  50#include <linux/init.h>
  51#include <linux/types.h>
  52#include <linux/fs.h>
  53#include <linux/slab.h>
  54#include <linux/errno.h>
  55#include <linux/device.h>
  56#include <linux/dma-mapping.h>
  57#include <linux/platform_device.h>
  58#include <linux/workqueue.h>
  59#include <linux/io.h>
  60#include <adf_accel_devices.h>
  61#include <adf_common_drv.h>
  62#include <adf_cfg.h>
  63#include "adf_dh895xcc_hw_data.h"
  64
  65#define ADF_SYSTEM_DEVICE(device_id) \
  66        {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
  67
  68static const struct pci_device_id adf_pci_tbl[] = {
  69        ADF_SYSTEM_DEVICE(ADF_DH895XCC_PCI_DEVICE_ID),
  70        {0,}
  71};
  72MODULE_DEVICE_TABLE(pci, adf_pci_tbl);
  73
  74static int adf_probe(struct pci_dev *dev, const struct pci_device_id *ent);
  75static void adf_remove(struct pci_dev *dev);
  76
  77static struct pci_driver adf_driver = {
  78        .id_table = adf_pci_tbl,
  79        .name = ADF_DH895XCC_DEVICE_NAME,
  80        .probe = adf_probe,
  81        .remove = adf_remove,
  82        .sriov_configure = adf_sriov_configure,
  83};
  84
  85static void adf_cleanup_pci_dev(struct adf_accel_dev *accel_dev)
  86{
  87        pci_release_regions(accel_dev->accel_pci_dev.pci_dev);
  88        pci_disable_device(accel_dev->accel_pci_dev.pci_dev);
  89}
  90
  91static void adf_cleanup_accel(struct adf_accel_dev *accel_dev)
  92{
  93        struct adf_accel_pci *accel_pci_dev = &accel_dev->accel_pci_dev;
  94        int i;
  95
  96        for (i = 0; i < ADF_PCI_MAX_BARS; i++) {
  97                struct adf_bar *bar = &accel_pci_dev->pci_bars[i];
  98
  99                if (bar->virt_addr)
 100                        pci_iounmap(accel_pci_dev->pci_dev, bar->virt_addr);
 101        }
 102
 103        if (accel_dev->hw_device) {
 104                switch (accel_pci_dev->pci_dev->device) {
 105                case ADF_DH895XCC_PCI_DEVICE_ID:
 106                        adf_clean_hw_data_dh895xcc(accel_dev->hw_device);
 107                        break;
 108                default:
 109                        break;
 110                }
 111                kfree(accel_dev->hw_device);
 112                accel_dev->hw_device = NULL;
 113        }
 114        adf_cfg_dev_remove(accel_dev);
 115        debugfs_remove(accel_dev->debugfs_dir);
 116        adf_devmgr_rm_dev(accel_dev, NULL);
 117}
 118
 119static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 120{
 121        struct adf_accel_dev *accel_dev;
 122        struct adf_accel_pci *accel_pci_dev;
 123        struct adf_hw_device_data *hw_data;
 124        char name[ADF_DEVICE_NAME_LENGTH];
 125        unsigned int i, bar_nr;
 126        unsigned long bar_mask;
 127        int ret;
 128
 129        switch (ent->device) {
 130        case ADF_DH895XCC_PCI_DEVICE_ID:
 131                break;
 132        default:
 133                dev_err(&pdev->dev, "Invalid device 0x%x.\n", ent->device);
 134                return -ENODEV;
 135        }
 136
 137        if (num_possible_nodes() > 1 && dev_to_node(&pdev->dev) < 0) {
 138                /* If the accelerator is connected to a node with no memory
 139                 * there is no point in using the accelerator since the remote
 140                 * memory transaction will be very slow. */
 141                dev_err(&pdev->dev, "Invalid NUMA configuration.\n");
 142                return -EINVAL;
 143        }
 144
 145        accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL,
 146                                 dev_to_node(&pdev->dev));
 147        if (!accel_dev)
 148                return -ENOMEM;
 149
 150        INIT_LIST_HEAD(&accel_dev->crypto_list);
 151        accel_pci_dev = &accel_dev->accel_pci_dev;
 152        accel_pci_dev->pci_dev = pdev;
 153
 154        /* Add accel device to accel table.
 155         * This should be called before adf_cleanup_accel is called */
 156        if (adf_devmgr_add_dev(accel_dev, NULL)) {
 157                dev_err(&pdev->dev, "Failed to add new accelerator device.\n");
 158                kfree(accel_dev);
 159                return -EFAULT;
 160        }
 161
 162        accel_dev->owner = THIS_MODULE;
 163        /* Allocate and configure device configuration structure */
 164        hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL,
 165                               dev_to_node(&pdev->dev));
 166        if (!hw_data) {
 167                ret = -ENOMEM;
 168                goto out_err;
 169        }
 170
 171        accel_dev->hw_device = hw_data;
 172        adf_init_hw_data_dh895xcc(accel_dev->hw_device);
 173        pci_read_config_byte(pdev, PCI_REVISION_ID, &accel_pci_dev->revid);
 174        pci_read_config_dword(pdev, ADF_DEVICE_FUSECTL_OFFSET,
 175                              &hw_data->fuses);
 176
 177        /* Get Accelerators and Accelerators Engines masks */
 178        hw_data->accel_mask = hw_data->get_accel_mask(hw_data->fuses);
 179        hw_data->ae_mask = hw_data->get_ae_mask(hw_data->fuses);
 180        accel_pci_dev->sku = hw_data->get_sku(hw_data);
 181        /* If the device has no acceleration engines then ignore it. */
 182        if (!hw_data->accel_mask || !hw_data->ae_mask ||
 183            ((~hw_data->ae_mask) & 0x01)) {
 184                dev_err(&pdev->dev, "No acceleration units found");
 185                ret = -EFAULT;
 186                goto out_err;
 187        }
 188
 189        /* Create dev top level debugfs entry */
 190        snprintf(name, sizeof(name), "%s%s_%02x:%02d.%d",
 191                 ADF_DEVICE_NAME_PREFIX, hw_data->dev_class->name,
 192                 pdev->bus->number, PCI_SLOT(pdev->devfn),
 193                 PCI_FUNC(pdev->devfn));
 194
 195        accel_dev->debugfs_dir = debugfs_create_dir(name, NULL);
 196        if (!accel_dev->debugfs_dir) {
 197                dev_err(&pdev->dev, "Could not create debugfs dir %s\n", name);
 198                ret = -EINVAL;
 199                goto out_err;
 200        }
 201
 202        /* Create device configuration table */
 203        ret = adf_cfg_dev_add(accel_dev);
 204        if (ret)
 205                goto out_err;
 206
 207        pcie_set_readrq(pdev, 1024);
 208
 209        /* enable PCI device */
 210        if (pci_enable_device(pdev)) {
 211                ret = -EFAULT;
 212                goto out_err;
 213        }
 214
 215        /* set dma identifier */
 216        if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 217                if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
 218                        dev_err(&pdev->dev, "No usable DMA configuration\n");
 219                        ret = -EFAULT;
 220                        goto out_err_disable;
 221                } else {
 222                        pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 223                }
 224
 225        } else {
 226                pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 227        }
 228
 229        if (pci_request_regions(pdev, ADF_DH895XCC_DEVICE_NAME)) {
 230                ret = -EFAULT;
 231                goto out_err_disable;
 232        }
 233
 234        /* Read accelerator capabilities mask */
 235        pci_read_config_dword(pdev, ADF_DEVICE_LEGFUSE_OFFSET,
 236                              &hw_data->accel_capabilities_mask);
 237
 238        /* Find and map all the device's BARS */
 239        i = 0;
 240        bar_mask = pci_select_bars(pdev, IORESOURCE_MEM);
 241        for_each_set_bit(bar_nr, &bar_mask, ADF_PCI_MAX_BARS * 2) {
 242                struct adf_bar *bar = &accel_pci_dev->pci_bars[i++];
 243
 244                bar->base_addr = pci_resource_start(pdev, bar_nr);
 245                if (!bar->base_addr)
 246                        break;
 247                bar->size = pci_resource_len(pdev, bar_nr);
 248                bar->virt_addr = pci_iomap(accel_pci_dev->pci_dev, bar_nr, 0);
 249                if (!bar->virt_addr) {
 250                        dev_err(&pdev->dev, "Failed to map BAR %d\n", bar_nr);
 251                        ret = -EFAULT;
 252                        goto out_err_free_reg;
 253                }
 254        }
 255        pci_set_master(pdev);
 256
 257        if (adf_enable_aer(accel_dev, &adf_driver)) {
 258                dev_err(&pdev->dev, "Failed to enable aer\n");
 259                ret = -EFAULT;
 260                goto out_err_free_reg;
 261        }
 262
 263        if (pci_save_state(pdev)) {
 264                dev_err(&pdev->dev, "Failed to save pci state\n");
 265                ret = -ENOMEM;
 266                goto out_err_free_reg;
 267        }
 268
 269        ret = qat_crypto_dev_config(accel_dev);
 270        if (ret)
 271                goto out_err_free_reg;
 272
 273        ret = adf_dev_init(accel_dev);
 274        if (ret)
 275                goto out_err_dev_shutdown;
 276
 277        ret = adf_dev_start(accel_dev);
 278        if (ret)
 279                goto out_err_dev_stop;
 280
 281        return ret;
 282
 283out_err_dev_stop:
 284        adf_dev_stop(accel_dev);
 285out_err_dev_shutdown:
 286        adf_dev_shutdown(accel_dev);
 287out_err_free_reg:
 288        pci_release_regions(accel_pci_dev->pci_dev);
 289out_err_disable:
 290        pci_disable_device(accel_pci_dev->pci_dev);
 291out_err:
 292        adf_cleanup_accel(accel_dev);
 293        kfree(accel_dev);
 294        return ret;
 295}
 296
 297static void adf_remove(struct pci_dev *pdev)
 298{
 299        struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev);
 300
 301        if (!accel_dev) {
 302                pr_err("QAT: Driver removal failed\n");
 303                return;
 304        }
 305        adf_dev_stop(accel_dev);
 306        adf_dev_shutdown(accel_dev);
 307        adf_disable_aer(accel_dev);
 308        adf_cleanup_accel(accel_dev);
 309        adf_cleanup_pci_dev(accel_dev);
 310        kfree(accel_dev);
 311}
 312
 313static int __init adfdrv_init(void)
 314{
 315        request_module("intel_qat");
 316
 317        if (pci_register_driver(&adf_driver)) {
 318                pr_err("QAT: Driver initialization failed\n");
 319                return -EFAULT;
 320        }
 321        return 0;
 322}
 323
 324static void __exit adfdrv_release(void)
 325{
 326        pci_unregister_driver(&adf_driver);
 327}
 328
 329module_init(adfdrv_init);
 330module_exit(adfdrv_release);
 331
 332MODULE_LICENSE("Dual BSD/GPL");
 333MODULE_AUTHOR("Intel");
 334MODULE_FIRMWARE(ADF_DH895XCC_FW);
 335MODULE_FIRMWARE(ADF_DH895XCC_MMP);
 336MODULE_DESCRIPTION("Intel(R) QuickAssist Technology");
 337MODULE_VERSION(ADF_DRV_VERSION);
 338