linux/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
<<
>>
Prefs
   1/*************************************************************************
   2 * myri10ge.c: Myricom Myri-10G Ethernet driver.
   3 *
   4 * Copyright (C) 2005 - 2011 Myricom, Inc.
   5 * All rights reserved.
   6 *
   7 * Redistribution and use in source and binary forms, with or without
   8 * modification, are permitted provided that the following conditions
   9 * are met:
  10 * 1. Redistributions of source code must retain the above copyright
  11 *    notice, this list of conditions and the following disclaimer.
  12 * 2. Redistributions in binary form must reproduce the above copyright
  13 *    notice, this list of conditions and the following disclaimer in the
  14 *    documentation and/or other materials provided with the distribution.
  15 * 3. Neither the name of Myricom, Inc. nor the names of its contributors
  16 *    may be used to endorse or promote products derived from this software
  17 *    without specific prior written permission.
  18 *
  19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  22 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29 * POSSIBILITY OF SUCH DAMAGE.
  30 *
  31 *
  32 * If the eeprom on your board is not recent enough, you will need to get a
  33 * newer firmware image at:
  34 *   http://www.myri.com/scs/download-Myri10GE.html
  35 *
  36 * Contact Information:
  37 *   <help@myri.com>
  38 *   Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
  39 *************************************************************************/
  40
  41#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  42
  43#include <linux/tcp.h>
  44#include <linux/netdevice.h>
  45#include <linux/skbuff.h>
  46#include <linux/string.h>
  47#include <linux/module.h>
  48#include <linux/pci.h>
  49#include <linux/dma-mapping.h>
  50#include <linux/etherdevice.h>
  51#include <linux/if_ether.h>
  52#include <linux/if_vlan.h>
  53#include <linux/dca.h>
  54#include <linux/ip.h>
  55#include <linux/inet.h>
  56#include <linux/in.h>
  57#include <linux/ethtool.h>
  58#include <linux/firmware.h>
  59#include <linux/delay.h>
  60#include <linux/timer.h>
  61#include <linux/vmalloc.h>
  62#include <linux/crc32.h>
  63#include <linux/moduleparam.h>
  64#include <linux/io.h>
  65#include <linux/log2.h>
  66#include <linux/slab.h>
  67#include <linux/prefetch.h>
  68#include <net/checksum.h>
  69#include <net/ip.h>
  70#include <net/tcp.h>
  71#include <asm/byteorder.h>
  72#include <asm/processor.h>
  73
  74#include "myri10ge_mcp.h"
  75#include "myri10ge_mcp_gen_header.h"
  76
  77#define MYRI10GE_VERSION_STR "1.5.3-1.534"
  78
  79MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
  80MODULE_AUTHOR("Maintainer: help@myri.com");
  81MODULE_VERSION(MYRI10GE_VERSION_STR);
  82MODULE_LICENSE("Dual BSD/GPL");
  83
  84#define MYRI10GE_MAX_ETHER_MTU 9014
  85
  86#define MYRI10GE_ETH_STOPPED 0
  87#define MYRI10GE_ETH_STOPPING 1
  88#define MYRI10GE_ETH_STARTING 2
  89#define MYRI10GE_ETH_RUNNING 3
  90#define MYRI10GE_ETH_OPEN_FAILED 4
  91
  92#define MYRI10GE_EEPROM_STRINGS_SIZE 256
  93#define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
  94
  95#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
  96#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
  97
  98#define MYRI10GE_ALLOC_ORDER 0
  99#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
 100#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
 101
 102#define MYRI10GE_MAX_SLICES 32
 103
 104struct myri10ge_rx_buffer_state {
 105        struct page *page;
 106        int page_offset;
 107        DEFINE_DMA_UNMAP_ADDR(bus);
 108        DEFINE_DMA_UNMAP_LEN(len);
 109};
 110
 111struct myri10ge_tx_buffer_state {
 112        struct sk_buff *skb;
 113        int last;
 114        DEFINE_DMA_UNMAP_ADDR(bus);
 115        DEFINE_DMA_UNMAP_LEN(len);
 116};
 117
 118struct myri10ge_cmd {
 119        u32 data0;
 120        u32 data1;
 121        u32 data2;
 122};
 123
 124struct myri10ge_rx_buf {
 125        struct mcp_kreq_ether_recv __iomem *lanai;      /* lanai ptr for recv ring */
 126        struct mcp_kreq_ether_recv *shadow;     /* host shadow of recv ring */
 127        struct myri10ge_rx_buffer_state *info;
 128        struct page *page;
 129        dma_addr_t bus;
 130        int page_offset;
 131        int cnt;
 132        int fill_cnt;
 133        int alloc_fail;
 134        int mask;               /* number of rx slots -1 */
 135        int watchdog_needed;
 136};
 137
 138struct myri10ge_tx_buf {
 139        struct mcp_kreq_ether_send __iomem *lanai;      /* lanai ptr for sendq */
 140        __be32 __iomem *send_go;        /* "go" doorbell ptr */
 141        __be32 __iomem *send_stop;      /* "stop" doorbell ptr */
 142        struct mcp_kreq_ether_send *req_list;   /* host shadow of sendq */
 143        char *req_bytes;
 144        struct myri10ge_tx_buffer_state *info;
 145        int mask;               /* number of transmit slots -1  */
 146        int req ____cacheline_aligned;  /* transmit slots submitted     */
 147        int pkt_start;          /* packets started */
 148        int stop_queue;
 149        int linearized;
 150        int done ____cacheline_aligned; /* transmit slots completed     */
 151        int pkt_done;           /* packets completed */
 152        int wake_queue;
 153        int queue_active;
 154};
 155
 156struct myri10ge_rx_done {
 157        struct mcp_slot *entry;
 158        dma_addr_t bus;
 159        int cnt;
 160        int idx;
 161};
 162
 163struct myri10ge_slice_netstats {
 164        unsigned long rx_packets;
 165        unsigned long tx_packets;
 166        unsigned long rx_bytes;
 167        unsigned long tx_bytes;
 168        unsigned long rx_dropped;
 169        unsigned long tx_dropped;
 170};
 171
 172struct myri10ge_slice_state {
 173        struct myri10ge_tx_buf tx;      /* transmit ring        */
 174        struct myri10ge_rx_buf rx_small;
 175        struct myri10ge_rx_buf rx_big;
 176        struct myri10ge_rx_done rx_done;
 177        struct net_device *dev;
 178        struct napi_struct napi;
 179        struct myri10ge_priv *mgp;
 180        struct myri10ge_slice_netstats stats;
 181        __be32 __iomem *irq_claim;
 182        struct mcp_irq_data *fw_stats;
 183        dma_addr_t fw_stats_bus;
 184        int watchdog_tx_done;
 185        int watchdog_tx_req;
 186        int watchdog_rx_done;
 187        int stuck;
 188#ifdef CONFIG_MYRI10GE_DCA
 189        int cached_dca_tag;
 190        int cpu;
 191        __be32 __iomem *dca_tag;
 192#endif
 193        char irq_desc[32];
 194};
 195
 196struct myri10ge_priv {
 197        struct myri10ge_slice_state *ss;
 198        int tx_boundary;        /* boundary transmits cannot cross */
 199        int num_slices;
 200        int running;            /* running?             */
 201        int small_bytes;
 202        int big_bytes;
 203        int max_intr_slots;
 204        struct net_device *dev;
 205        u8 __iomem *sram;
 206        int sram_size;
 207        unsigned long board_span;
 208        unsigned long iomem_base;
 209        __be32 __iomem *irq_deassert;
 210        char *mac_addr_string;
 211        struct mcp_cmd_response *cmd;
 212        dma_addr_t cmd_bus;
 213        struct pci_dev *pdev;
 214        int msi_enabled;
 215        int msix_enabled;
 216        struct msix_entry *msix_vectors;
 217#ifdef CONFIG_MYRI10GE_DCA
 218        int dca_enabled;
 219        int relaxed_order;
 220#endif
 221        u32 link_state;
 222        unsigned int rdma_tags_available;
 223        int intr_coal_delay;
 224        __be32 __iomem *intr_coal_delay_ptr;
 225        int wc_cookie;
 226        int down_cnt;
 227        wait_queue_head_t down_wq;
 228        struct work_struct watchdog_work;
 229        struct timer_list watchdog_timer;
 230        int watchdog_resets;
 231        int watchdog_pause;
 232        int pause;
 233        bool fw_name_allocated;
 234        char *fw_name;
 235        char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
 236        char *product_code_string;
 237        char fw_version[128];
 238        int fw_ver_major;
 239        int fw_ver_minor;
 240        int fw_ver_tiny;
 241        int adopted_rx_filter_bug;
 242        u8 mac_addr[ETH_ALEN];          /* eeprom mac address */
 243        unsigned long serial_number;
 244        int vendor_specific_offset;
 245        int fw_multicast_support;
 246        u32 features;
 247        u32 max_tso6;
 248        u32 read_dma;
 249        u32 write_dma;
 250        u32 read_write_dma;
 251        u32 link_changes;
 252        u32 msg_enable;
 253        unsigned int board_number;
 254        int rebooted;
 255};
 256
 257static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
 258static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
 259static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
 260static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
 261MODULE_FIRMWARE("myri10ge_ethp_z8e.dat");
 262MODULE_FIRMWARE("myri10ge_eth_z8e.dat");
 263MODULE_FIRMWARE("myri10ge_rss_ethp_z8e.dat");
 264MODULE_FIRMWARE("myri10ge_rss_eth_z8e.dat");
 265
 266/* Careful: must be accessed under kernel_param_lock() */
 267static char *myri10ge_fw_name = NULL;
 268module_param(myri10ge_fw_name, charp, 0644);
 269MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
 270
 271#define MYRI10GE_MAX_BOARDS 8
 272static char *myri10ge_fw_names[MYRI10GE_MAX_BOARDS] =
 273    {[0 ... (MYRI10GE_MAX_BOARDS - 1)] = NULL };
 274module_param_array_named(myri10ge_fw_names, myri10ge_fw_names, charp, NULL,
 275                         0444);
 276MODULE_PARM_DESC(myri10ge_fw_names, "Firmware image names per board");
 277
 278static int myri10ge_ecrc_enable = 1;
 279module_param(myri10ge_ecrc_enable, int, 0444);
 280MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
 281
 282static int myri10ge_small_bytes = -1;   /* -1 == auto */
 283module_param(myri10ge_small_bytes, int, 0644);
 284MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
 285
 286static int myri10ge_msi = 1;    /* enable msi by default */
 287module_param(myri10ge_msi, int, 0644);
 288MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
 289
 290static int myri10ge_intr_coal_delay = 75;
 291module_param(myri10ge_intr_coal_delay, int, 0444);
 292MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
 293
 294static int myri10ge_flow_control = 1;
 295module_param(myri10ge_flow_control, int, 0444);
 296MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
 297
 298static int myri10ge_deassert_wait = 1;
 299module_param(myri10ge_deassert_wait, int, 0644);
 300MODULE_PARM_DESC(myri10ge_deassert_wait,
 301                 "Wait when deasserting legacy interrupts");
 302
 303static int myri10ge_force_firmware = 0;
 304module_param(myri10ge_force_firmware, int, 0444);
 305MODULE_PARM_DESC(myri10ge_force_firmware,
 306                 "Force firmware to assume aligned completions");
 307
 308static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
 309module_param(myri10ge_initial_mtu, int, 0444);
 310MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
 311
 312static int myri10ge_napi_weight = 64;
 313module_param(myri10ge_napi_weight, int, 0444);
 314MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
 315
 316static int myri10ge_watchdog_timeout = 1;
 317module_param(myri10ge_watchdog_timeout, int, 0444);
 318MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
 319
 320static int myri10ge_max_irq_loops = 1048576;
 321module_param(myri10ge_max_irq_loops, int, 0444);
 322MODULE_PARM_DESC(myri10ge_max_irq_loops,
 323                 "Set stuck legacy IRQ detection threshold");
 324
 325#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
 326
 327static int myri10ge_debug = -1; /* defaults above */
 328module_param(myri10ge_debug, int, 0);
 329MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
 330
 331static int myri10ge_fill_thresh = 256;
 332module_param(myri10ge_fill_thresh, int, 0644);
 333MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
 334
 335static int myri10ge_reset_recover = 1;
 336
 337static int myri10ge_max_slices = 1;
 338module_param(myri10ge_max_slices, int, 0444);
 339MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
 340
 341static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT;
 342module_param(myri10ge_rss_hash, int, 0444);
 343MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
 344
 345static int myri10ge_dca = 1;
 346module_param(myri10ge_dca, int, 0444);
 347MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
 348
 349#define MYRI10GE_FW_OFFSET 1024*1024
 350#define MYRI10GE_HIGHPART_TO_U32(X) \
 351(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
 352#define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
 353
 354#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
 355
 356static void myri10ge_set_multicast_list(struct net_device *dev);
 357static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
 358                                         struct net_device *dev);
 359
 360static inline void put_be32(__be32 val, __be32 __iomem * p)
 361{
 362        __raw_writel((__force __u32) val, (__force void __iomem *)p);
 363}
 364
 365static void myri10ge_get_stats(struct net_device *dev,
 366                               struct rtnl_link_stats64 *stats);
 367
 368static void set_fw_name(struct myri10ge_priv *mgp, char *name, bool allocated)
 369{
 370        if (mgp->fw_name_allocated)
 371                kfree(mgp->fw_name);
 372        mgp->fw_name = name;
 373        mgp->fw_name_allocated = allocated;
 374}
 375
 376static int
 377myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
 378                  struct myri10ge_cmd *data, int atomic)
 379{
 380        struct mcp_cmd *buf;
 381        char buf_bytes[sizeof(*buf) + 8];
 382        struct mcp_cmd_response *response = mgp->cmd;
 383        char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
 384        u32 dma_low, dma_high, result, value;
 385        int sleep_total = 0;
 386
 387        /* ensure buf is aligned to 8 bytes */
 388        buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
 389
 390        buf->data0 = htonl(data->data0);
 391        buf->data1 = htonl(data->data1);
 392        buf->data2 = htonl(data->data2);
 393        buf->cmd = htonl(cmd);
 394        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 395        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 396
 397        buf->response_addr.low = htonl(dma_low);
 398        buf->response_addr.high = htonl(dma_high);
 399        response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
 400        mb();
 401        myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
 402
 403        /* wait up to 15ms. Longest command is the DMA benchmark,
 404         * which is capped at 5ms, but runs from a timeout handler
 405         * that runs every 7.8ms. So a 15ms timeout leaves us with
 406         * a 2.2ms margin
 407         */
 408        if (atomic) {
 409                /* if atomic is set, do not sleep,
 410                 * and try to get the completion quickly
 411                 * (1ms will be enough for those commands) */
 412                for (sleep_total = 0;
 413                     sleep_total < 1000 &&
 414                     response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 415                     sleep_total += 10) {
 416                        udelay(10);
 417                        mb();
 418                }
 419        } else {
 420                /* use msleep for most command */
 421                for (sleep_total = 0;
 422                     sleep_total < 15 &&
 423                     response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 424                     sleep_total++)
 425                        msleep(1);
 426        }
 427
 428        result = ntohl(response->result);
 429        value = ntohl(response->data);
 430        if (result != MYRI10GE_NO_RESPONSE_RESULT) {
 431                if (result == 0) {
 432                        data->data0 = value;
 433                        return 0;
 434                } else if (result == MXGEFW_CMD_UNKNOWN) {
 435                        return -ENOSYS;
 436                } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
 437                        return -E2BIG;
 438                } else if (result == MXGEFW_CMD_ERROR_RANGE &&
 439                           cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
 440                           (data->
 441                            data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
 442                           0) {
 443                        return -ERANGE;
 444                } else {
 445                        dev_err(&mgp->pdev->dev,
 446                                "command %d failed, result = %d\n",
 447                                cmd, result);
 448                        return -ENXIO;
 449                }
 450        }
 451
 452        dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
 453                cmd, result);
 454        return -EAGAIN;
 455}
 456
 457/*
 458 * The eeprom strings on the lanaiX have the format
 459 * SN=x\0
 460 * MAC=x:x:x:x:x:x\0
 461 * PT:ddd mmm xx xx:xx:xx xx\0
 462 * PV:ddd mmm xx xx:xx:xx xx\0
 463 */
 464static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
 465{
 466        char *ptr, *limit;
 467        int i;
 468
 469        ptr = mgp->eeprom_strings;
 470        limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
 471
 472        while (*ptr != '\0' && ptr < limit) {
 473                if (memcmp(ptr, "MAC=", 4) == 0) {
 474                        ptr += 4;
 475                        mgp->mac_addr_string = ptr;
 476                        for (i = 0; i < 6; i++) {
 477                                if ((ptr + 2) > limit)
 478                                        goto abort;
 479                                mgp->mac_addr[i] =
 480                                    simple_strtoul(ptr, &ptr, 16);
 481                                ptr += 1;
 482                        }
 483                }
 484                if (memcmp(ptr, "PC=", 3) == 0) {
 485                        ptr += 3;
 486                        mgp->product_code_string = ptr;
 487                }
 488                if (memcmp((const void *)ptr, "SN=", 3) == 0) {
 489                        ptr += 3;
 490                        mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
 491                }
 492                while (ptr < limit && *ptr++) ;
 493        }
 494
 495        return 0;
 496
 497abort:
 498        dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
 499        return -ENXIO;
 500}
 501
 502/*
 503 * Enable or disable periodic RDMAs from the host to make certain
 504 * chipsets resend dropped PCIe messages
 505 */
 506
 507static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
 508{
 509        char __iomem *submit;
 510        __be32 buf[16] __attribute__ ((__aligned__(8)));
 511        u32 dma_low, dma_high;
 512        int i;
 513
 514        /* clear confirmation addr */
 515        mgp->cmd->data = 0;
 516        mb();
 517
 518        /* send a rdma command to the PCIe engine, and wait for the
 519         * response in the confirmation address.  The firmware should
 520         * write a -1 there to indicate it is alive and well
 521         */
 522        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 523        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 524
 525        buf[0] = htonl(dma_high);       /* confirm addr MSW */
 526        buf[1] = htonl(dma_low);        /* confirm addr LSW */
 527        buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 528        buf[3] = htonl(dma_high);       /* dummy addr MSW */
 529        buf[4] = htonl(dma_low);        /* dummy addr LSW */
 530        buf[5] = htonl(enable); /* enable? */
 531
 532        submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
 533
 534        myri10ge_pio_copy(submit, &buf, sizeof(buf));
 535        for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
 536                msleep(1);
 537        if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
 538                dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
 539                        (enable ? "enable" : "disable"));
 540}
 541
 542static int
 543myri10ge_validate_firmware(struct myri10ge_priv *mgp,
 544                           struct mcp_gen_header *hdr)
 545{
 546        struct device *dev = &mgp->pdev->dev;
 547
 548        /* check firmware type */
 549        if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
 550                dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
 551                return -EINVAL;
 552        }
 553
 554        /* save firmware version for ethtool */
 555        strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
 556        mgp->fw_version[sizeof(mgp->fw_version) - 1] = '\0';
 557
 558        sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
 559               &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
 560
 561        if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR &&
 562              mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
 563                dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
 564                dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
 565                        MXGEFW_VERSION_MINOR);
 566                return -EINVAL;
 567        }
 568        return 0;
 569}
 570
 571static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
 572{
 573        unsigned crc, reread_crc;
 574        const struct firmware *fw;
 575        struct device *dev = &mgp->pdev->dev;
 576        unsigned char *fw_readback;
 577        struct mcp_gen_header *hdr;
 578        size_t hdr_offset;
 579        int status;
 580        unsigned i;
 581
 582        if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
 583                dev_err(dev, "Unable to load %s firmware image via hotplug\n",
 584                        mgp->fw_name);
 585                status = -EINVAL;
 586                goto abort_with_nothing;
 587        }
 588
 589        /* check size */
 590
 591        if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
 592            fw->size < MCP_HEADER_PTR_OFFSET + 4) {
 593                dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
 594                status = -EINVAL;
 595                goto abort_with_fw;
 596        }
 597
 598        /* check id */
 599        hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
 600        if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
 601                dev_err(dev, "Bad firmware file\n");
 602                status = -EINVAL;
 603                goto abort_with_fw;
 604        }
 605        hdr = (void *)(fw->data + hdr_offset);
 606
 607        status = myri10ge_validate_firmware(mgp, hdr);
 608        if (status != 0)
 609                goto abort_with_fw;
 610
 611        crc = crc32(~0, fw->data, fw->size);
 612        for (i = 0; i < fw->size; i += 256) {
 613                myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
 614                                  fw->data + i,
 615                                  min(256U, (unsigned)(fw->size - i)));
 616                mb();
 617                readb(mgp->sram);
 618        }
 619        fw_readback = vmalloc(fw->size);
 620        if (!fw_readback) {
 621                status = -ENOMEM;
 622                goto abort_with_fw;
 623        }
 624        /* corruption checking is good for parity recovery and buggy chipset */
 625        memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
 626        reread_crc = crc32(~0, fw_readback, fw->size);
 627        vfree(fw_readback);
 628        if (crc != reread_crc) {
 629                dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
 630                        (unsigned)fw->size, reread_crc, crc);
 631                status = -EIO;
 632                goto abort_with_fw;
 633        }
 634        *size = (u32) fw->size;
 635
 636abort_with_fw:
 637        release_firmware(fw);
 638
 639abort_with_nothing:
 640        return status;
 641}
 642
 643static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
 644{
 645        struct mcp_gen_header *hdr;
 646        struct device *dev = &mgp->pdev->dev;
 647        const size_t bytes = sizeof(struct mcp_gen_header);
 648        size_t hdr_offset;
 649        int status;
 650
 651        /* find running firmware header */
 652        hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
 653
 654        if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
 655                dev_err(dev, "Running firmware has bad header offset (%d)\n",
 656                        (int)hdr_offset);
 657                return -EIO;
 658        }
 659
 660        /* copy header of running firmware from SRAM to host memory to
 661         * validate firmware */
 662        hdr = kmalloc(bytes, GFP_KERNEL);
 663        if (hdr == NULL)
 664                return -ENOMEM;
 665
 666        memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
 667        status = myri10ge_validate_firmware(mgp, hdr);
 668        kfree(hdr);
 669
 670        /* check to see if adopted firmware has bug where adopting
 671         * it will cause broadcasts to be filtered unless the NIC
 672         * is kept in ALLMULTI mode */
 673        if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
 674            mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
 675                mgp->adopted_rx_filter_bug = 1;
 676                dev_warn(dev, "Adopting fw %d.%d.%d: "
 677                         "working around rx filter bug\n",
 678                         mgp->fw_ver_major, mgp->fw_ver_minor,
 679                         mgp->fw_ver_tiny);
 680        }
 681        return status;
 682}
 683
 684static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
 685{
 686        struct myri10ge_cmd cmd;
 687        int status;
 688
 689        /* probe for IPv6 TSO support */
 690        mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
 691        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
 692                                   &cmd, 0);
 693        if (status == 0) {
 694                mgp->max_tso6 = cmd.data0;
 695                mgp->features |= NETIF_F_TSO6;
 696        }
 697
 698        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
 699        if (status != 0) {
 700                dev_err(&mgp->pdev->dev,
 701                        "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
 702                return -ENXIO;
 703        }
 704
 705        mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
 706
 707        return 0;
 708}
 709
 710static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
 711{
 712        char __iomem *submit;
 713        __be32 buf[16] __attribute__ ((__aligned__(8)));
 714        u32 dma_low, dma_high, size;
 715        int status, i;
 716
 717        size = 0;
 718        status = myri10ge_load_hotplug_firmware(mgp, &size);
 719        if (status) {
 720                if (!adopt)
 721                        return status;
 722                dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
 723
 724                /* Do not attempt to adopt firmware if there
 725                 * was a bad crc */
 726                if (status == -EIO)
 727                        return status;
 728
 729                status = myri10ge_adopt_running_firmware(mgp);
 730                if (status != 0) {
 731                        dev_err(&mgp->pdev->dev,
 732                                "failed to adopt running firmware\n");
 733                        return status;
 734                }
 735                dev_info(&mgp->pdev->dev,
 736                         "Successfully adopted running firmware\n");
 737                if (mgp->tx_boundary == 4096) {
 738                        dev_warn(&mgp->pdev->dev,
 739                                 "Using firmware currently running on NIC"
 740                                 ".  For optimal\n");
 741                        dev_warn(&mgp->pdev->dev,
 742                                 "performance consider loading optimized "
 743                                 "firmware\n");
 744                        dev_warn(&mgp->pdev->dev, "via hotplug\n");
 745                }
 746
 747                set_fw_name(mgp, "adopted", false);
 748                mgp->tx_boundary = 2048;
 749                myri10ge_dummy_rdma(mgp, 1);
 750                status = myri10ge_get_firmware_capabilities(mgp);
 751                return status;
 752        }
 753
 754        /* clear confirmation addr */
 755        mgp->cmd->data = 0;
 756        mb();
 757
 758        /* send a reload command to the bootstrap MCP, and wait for the
 759         *  response in the confirmation address.  The firmware should
 760         * write a -1 there to indicate it is alive and well
 761         */
 762        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 763        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 764
 765        buf[0] = htonl(dma_high);       /* confirm addr MSW */
 766        buf[1] = htonl(dma_low);        /* confirm addr LSW */
 767        buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 768
 769        /* FIX: All newest firmware should un-protect the bottom of
 770         * the sram before handoff. However, the very first interfaces
 771         * do not. Therefore the handoff copy must skip the first 8 bytes
 772         */
 773        buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
 774        buf[4] = htonl(size - 8);       /* length of code */
 775        buf[5] = htonl(8);      /* where to copy to */
 776        buf[6] = htonl(0);      /* where to jump to */
 777
 778        submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
 779
 780        myri10ge_pio_copy(submit, &buf, sizeof(buf));
 781        mb();
 782        msleep(1);
 783        mb();
 784        i = 0;
 785        while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
 786                msleep(1 << i);
 787                i++;
 788        }
 789        if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
 790                dev_err(&mgp->pdev->dev, "handoff failed\n");
 791                return -ENXIO;
 792        }
 793        myri10ge_dummy_rdma(mgp, 1);
 794        status = myri10ge_get_firmware_capabilities(mgp);
 795
 796        return status;
 797}
 798
 799static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
 800{
 801        struct myri10ge_cmd cmd;
 802        int status;
 803
 804        cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
 805                     | (addr[2] << 8) | addr[3]);
 806
 807        cmd.data1 = ((addr[4] << 8) | (addr[5]));
 808
 809        status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
 810        return status;
 811}
 812
 813static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
 814{
 815        struct myri10ge_cmd cmd;
 816        int status, ctl;
 817
 818        ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
 819        status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
 820
 821        if (status) {
 822                netdev_err(mgp->dev, "Failed to set flow control mode\n");
 823                return status;
 824        }
 825        mgp->pause = pause;
 826        return 0;
 827}
 828
 829static void
 830myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
 831{
 832        struct myri10ge_cmd cmd;
 833        int status, ctl;
 834
 835        ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
 836        status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
 837        if (status)
 838                netdev_err(mgp->dev, "Failed to set promisc mode\n");
 839}
 840
 841static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
 842{
 843        struct myri10ge_cmd cmd;
 844        int status;
 845        u32 len;
 846        struct page *dmatest_page;
 847        dma_addr_t dmatest_bus;
 848        char *test = " ";
 849
 850        dmatest_page = alloc_page(GFP_KERNEL);
 851        if (!dmatest_page)
 852                return -ENOMEM;
 853        dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
 854                                   DMA_BIDIRECTIONAL);
 855        if (unlikely(pci_dma_mapping_error(mgp->pdev, dmatest_bus))) {
 856                __free_page(dmatest_page);
 857                return -ENOMEM;
 858        }
 859
 860        /* Run a small DMA test.
 861         * The magic multipliers to the length tell the firmware
 862         * to do DMA read, write, or read+write tests.  The
 863         * results are returned in cmd.data0.  The upper 16
 864         * bits or the return is the number of transfers completed.
 865         * The lower 16 bits is the time in 0.5us ticks that the
 866         * transfers took to complete.
 867         */
 868
 869        len = mgp->tx_boundary;
 870
 871        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 872        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 873        cmd.data2 = len * 0x10000;
 874        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 875        if (status != 0) {
 876                test = "read";
 877                goto abort;
 878        }
 879        mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 880        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 881        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 882        cmd.data2 = len * 0x1;
 883        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 884        if (status != 0) {
 885                test = "write";
 886                goto abort;
 887        }
 888        mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 889
 890        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 891        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 892        cmd.data2 = len * 0x10001;
 893        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 894        if (status != 0) {
 895                test = "read/write";
 896                goto abort;
 897        }
 898        mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
 899            (cmd.data0 & 0xffff);
 900
 901abort:
 902        pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
 903        put_page(dmatest_page);
 904
 905        if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
 906                dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
 907                         test, status);
 908
 909        return status;
 910}
 911
 912static int myri10ge_reset(struct myri10ge_priv *mgp)
 913{
 914        struct myri10ge_cmd cmd;
 915        struct myri10ge_slice_state *ss;
 916        int i, status;
 917        size_t bytes;
 918#ifdef CONFIG_MYRI10GE_DCA
 919        unsigned long dca_tag_off;
 920#endif
 921
 922        /* try to send a reset command to the card to see if it
 923         * is alive */
 924        memset(&cmd, 0, sizeof(cmd));
 925        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
 926        if (status != 0) {
 927                dev_err(&mgp->pdev->dev, "failed reset\n");
 928                return -ENXIO;
 929        }
 930
 931        (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
 932        /*
 933         * Use non-ndis mcp_slot (eg, 4 bytes total,
 934         * no toeplitz hash value returned.  Older firmware will
 935         * not understand this command, but will use the correct
 936         * sized mcp_slot, so we ignore error returns
 937         */
 938        cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
 939        (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
 940
 941        /* Now exchange information about interrupts  */
 942
 943        bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
 944        cmd.data0 = (u32) bytes;
 945        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
 946
 947        /*
 948         * Even though we already know how many slices are supported
 949         * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
 950         * has magic side effects, and must be called after a reset.
 951         * It must be called prior to calling any RSS related cmds,
 952         * including assigning an interrupt queue for anything but
 953         * slice 0.  It must also be called *after*
 954         * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
 955         * the firmware to compute offsets.
 956         */
 957
 958        if (mgp->num_slices > 1) {
 959
 960                /* ask the maximum number of slices it supports */
 961                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
 962                                           &cmd, 0);
 963                if (status != 0) {
 964                        dev_err(&mgp->pdev->dev,
 965                                "failed to get number of slices\n");
 966                }
 967
 968                /*
 969                 * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
 970                 * to setting up the interrupt queue DMA
 971                 */
 972
 973                cmd.data0 = mgp->num_slices;
 974                cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
 975                if (mgp->dev->real_num_tx_queues > 1)
 976                        cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
 977                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
 978                                           &cmd, 0);
 979
 980                /* Firmware older than 1.4.32 only supports multiple
 981                 * RX queues, so if we get an error, first retry using a
 982                 * single TX queue before giving up */
 983                if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
 984                        netif_set_real_num_tx_queues(mgp->dev, 1);
 985                        cmd.data0 = mgp->num_slices;
 986                        cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
 987                        status = myri10ge_send_cmd(mgp,
 988                                                   MXGEFW_CMD_ENABLE_RSS_QUEUES,
 989                                                   &cmd, 0);
 990                }
 991
 992                if (status != 0) {
 993                        dev_err(&mgp->pdev->dev,
 994                                "failed to set number of slices\n");
 995
 996                        return status;
 997                }
 998        }
 999        for (i = 0; i < mgp->num_slices; i++) {
1000                ss = &mgp->ss[i];
1001                cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
1002                cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
1003                cmd.data2 = i;
1004                status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
1005                                            &cmd, 0);
1006        }
1007
1008        status |=
1009            myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
1010        for (i = 0; i < mgp->num_slices; i++) {
1011                ss = &mgp->ss[i];
1012                ss->irq_claim =
1013                    (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
1014        }
1015        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
1016                                    &cmd, 0);
1017        mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
1018
1019        status |= myri10ge_send_cmd
1020            (mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
1021        mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
1022        if (status != 0) {
1023                dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
1024                return status;
1025        }
1026        put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1027
1028#ifdef CONFIG_MYRI10GE_DCA
1029        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
1030        dca_tag_off = cmd.data0;
1031        for (i = 0; i < mgp->num_slices; i++) {
1032                ss = &mgp->ss[i];
1033                if (status == 0) {
1034                        ss->dca_tag = (__iomem __be32 *)
1035                            (mgp->sram + dca_tag_off + 4 * i);
1036                } else {
1037                        ss->dca_tag = NULL;
1038                }
1039        }
1040#endif                          /* CONFIG_MYRI10GE_DCA */
1041
1042        /* reset mcp/driver shared state back to 0 */
1043
1044        mgp->link_changes = 0;
1045        for (i = 0; i < mgp->num_slices; i++) {
1046                ss = &mgp->ss[i];
1047
1048                memset(ss->rx_done.entry, 0, bytes);
1049                ss->tx.req = 0;
1050                ss->tx.done = 0;
1051                ss->tx.pkt_start = 0;
1052                ss->tx.pkt_done = 0;
1053                ss->rx_big.cnt = 0;
1054                ss->rx_small.cnt = 0;
1055                ss->rx_done.idx = 0;
1056                ss->rx_done.cnt = 0;
1057                ss->tx.wake_queue = 0;
1058                ss->tx.stop_queue = 0;
1059        }
1060
1061        status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
1062        myri10ge_change_pause(mgp, mgp->pause);
1063        myri10ge_set_multicast_list(mgp->dev);
1064        return status;
1065}
1066
1067#ifdef CONFIG_MYRI10GE_DCA
1068static int myri10ge_toggle_relaxed(struct pci_dev *pdev, int on)
1069{
1070        int ret;
1071        u16 ctl;
1072
1073        pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &ctl);
1074
1075        ret = (ctl & PCI_EXP_DEVCTL_RELAX_EN) >> 4;
1076        if (ret != on) {
1077                ctl &= ~PCI_EXP_DEVCTL_RELAX_EN;
1078                ctl |= (on << 4);
1079                pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, ctl);
1080        }
1081        return ret;
1082}
1083
1084static void
1085myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
1086{
1087        ss->cached_dca_tag = tag;
1088        put_be32(htonl(tag), ss->dca_tag);
1089}
1090
1091static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
1092{
1093        int cpu = get_cpu();
1094        int tag;
1095
1096        if (cpu != ss->cpu) {
1097                tag = dca3_get_tag(&ss->mgp->pdev->dev, cpu);
1098                if (ss->cached_dca_tag != tag)
1099                        myri10ge_write_dca(ss, cpu, tag);
1100                ss->cpu = cpu;
1101        }
1102        put_cpu();
1103}
1104
1105static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
1106{
1107        int err, i;
1108        struct pci_dev *pdev = mgp->pdev;
1109
1110        if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
1111                return;
1112        if (!myri10ge_dca) {
1113                dev_err(&pdev->dev, "dca disabled by administrator\n");
1114                return;
1115        }
1116        err = dca_add_requester(&pdev->dev);
1117        if (err) {
1118                if (err != -ENODEV)
1119                        dev_err(&pdev->dev,
1120                                "dca_add_requester() failed, err=%d\n", err);
1121                return;
1122        }
1123        mgp->relaxed_order = myri10ge_toggle_relaxed(pdev, 0);
1124        mgp->dca_enabled = 1;
1125        for (i = 0; i < mgp->num_slices; i++) {
1126                mgp->ss[i].cpu = -1;
1127                mgp->ss[i].cached_dca_tag = -1;
1128                myri10ge_update_dca(&mgp->ss[i]);
1129        }
1130}
1131
1132static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
1133{
1134        struct pci_dev *pdev = mgp->pdev;
1135
1136        if (!mgp->dca_enabled)
1137                return;
1138        mgp->dca_enabled = 0;
1139        if (mgp->relaxed_order)
1140                myri10ge_toggle_relaxed(pdev, 1);
1141        dca_remove_requester(&pdev->dev);
1142}
1143
1144static int myri10ge_notify_dca_device(struct device *dev, void *data)
1145{
1146        struct myri10ge_priv *mgp;
1147        unsigned long event;
1148
1149        mgp = dev_get_drvdata(dev);
1150        event = *(unsigned long *)data;
1151
1152        if (event == DCA_PROVIDER_ADD)
1153                myri10ge_setup_dca(mgp);
1154        else if (event == DCA_PROVIDER_REMOVE)
1155                myri10ge_teardown_dca(mgp);
1156        return 0;
1157}
1158#endif                          /* CONFIG_MYRI10GE_DCA */
1159
1160static inline void
1161myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
1162                    struct mcp_kreq_ether_recv *src)
1163{
1164        __be32 low;
1165
1166        low = src->addr_low;
1167        src->addr_low = htonl(DMA_BIT_MASK(32));
1168        myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
1169        mb();
1170        myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
1171        mb();
1172        src->addr_low = low;
1173        put_be32(low, &dst->addr_low);
1174        mb();
1175}
1176
1177static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
1178{
1179        struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
1180
1181        if ((skb->protocol == htons(ETH_P_8021Q)) &&
1182            (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
1183             vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
1184                skb->csum = hw_csum;
1185                skb->ip_summed = CHECKSUM_COMPLETE;
1186        }
1187}
1188
1189static void
1190myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
1191                        int bytes, int watchdog)
1192{
1193        struct page *page;
1194        dma_addr_t bus;
1195        int idx;
1196#if MYRI10GE_ALLOC_SIZE > 4096
1197        int end_offset;
1198#endif
1199
1200        if (unlikely(rx->watchdog_needed && !watchdog))
1201                return;
1202
1203        /* try to refill entire ring */
1204        while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
1205                idx = rx->fill_cnt & rx->mask;
1206                if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
1207                        /* we can use part of previous page */
1208                        get_page(rx->page);
1209                } else {
1210                        /* we need a new page */
1211                        page =
1212                            alloc_pages(GFP_ATOMIC | __GFP_COMP,
1213                                        MYRI10GE_ALLOC_ORDER);
1214                        if (unlikely(page == NULL)) {
1215                                if (rx->fill_cnt - rx->cnt < 16)
1216                                        rx->watchdog_needed = 1;
1217                                return;
1218                        }
1219
1220                        bus = pci_map_page(mgp->pdev, page, 0,
1221                                           MYRI10GE_ALLOC_SIZE,
1222                                           PCI_DMA_FROMDEVICE);
1223                        if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
1224                                __free_pages(page, MYRI10GE_ALLOC_ORDER);
1225                                if (rx->fill_cnt - rx->cnt < 16)
1226                                        rx->watchdog_needed = 1;
1227                                return;
1228                        }
1229
1230                        rx->page = page;
1231                        rx->page_offset = 0;
1232                        rx->bus = bus;
1233
1234                }
1235                rx->info[idx].page = rx->page;
1236                rx->info[idx].page_offset = rx->page_offset;
1237                /* note that this is the address of the start of the
1238                 * page */
1239                dma_unmap_addr_set(&rx->info[idx], bus, rx->bus);
1240                rx->shadow[idx].addr_low =
1241                    htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
1242                rx->shadow[idx].addr_high =
1243                    htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
1244
1245                /* start next packet on a cacheline boundary */
1246                rx->page_offset += SKB_DATA_ALIGN(bytes);
1247
1248#if MYRI10GE_ALLOC_SIZE > 4096
1249                /* don't cross a 4KB boundary */
1250                end_offset = rx->page_offset + bytes - 1;
1251                if ((unsigned)(rx->page_offset ^ end_offset) > 4095)
1252                        rx->page_offset = end_offset & ~4095;
1253#endif
1254                rx->fill_cnt++;
1255
1256                /* copy 8 descriptors to the firmware at a time */
1257                if ((idx & 7) == 7) {
1258                        myri10ge_submit_8rx(&rx->lanai[idx - 7],
1259                                            &rx->shadow[idx - 7]);
1260                }
1261        }
1262}
1263
1264static inline void
1265myri10ge_unmap_rx_page(struct pci_dev *pdev,
1266                       struct myri10ge_rx_buffer_state *info, int bytes)
1267{
1268        /* unmap the recvd page if we're the only or last user of it */
1269        if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
1270            (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
1271                pci_unmap_page(pdev, (dma_unmap_addr(info, bus)
1272                                      & ~(MYRI10GE_ALLOC_SIZE - 1)),
1273                               MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
1274        }
1275}
1276
1277/*
1278 * GRO does not support acceleration of tagged vlan frames, and
1279 * this NIC does not support vlan tag offload, so we must pop
1280 * the tag ourselves to be able to achieve GRO performance that
1281 * is comparable to LRO.
1282 */
1283
1284static inline void
1285myri10ge_vlan_rx(struct net_device *dev, void *addr, struct sk_buff *skb)
1286{
1287        u8 *va;
1288        struct vlan_ethhdr *veh;
1289        struct skb_frag_struct *frag;
1290        __wsum vsum;
1291
1292        va = addr;
1293        va += MXGEFW_PAD;
1294        veh = (struct vlan_ethhdr *)va;
1295        if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) ==
1296            NETIF_F_HW_VLAN_CTAG_RX &&
1297            veh->h_vlan_proto == htons(ETH_P_8021Q)) {
1298                /* fixup csum if needed */
1299                if (skb->ip_summed == CHECKSUM_COMPLETE) {
1300                        vsum = csum_partial(va + ETH_HLEN, VLAN_HLEN, 0);
1301                        skb->csum = csum_sub(skb->csum, vsum);
1302                }
1303                /* pop tag */
1304                __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(veh->h_vlan_TCI));
1305                memmove(va + VLAN_HLEN, va, 2 * ETH_ALEN);
1306                skb->len -= VLAN_HLEN;
1307                skb->data_len -= VLAN_HLEN;
1308                frag = skb_shinfo(skb)->frags;
1309                frag->page_offset += VLAN_HLEN;
1310                skb_frag_size_set(frag, skb_frag_size(frag) - VLAN_HLEN);
1311        }
1312}
1313
1314#define MYRI10GE_HLEN 64 /* Bytes to copy from page to skb linear memory */
1315
1316static inline int
1317myri10ge_rx_done(struct myri10ge_slice_state *ss, int len, __wsum csum)
1318{
1319        struct myri10ge_priv *mgp = ss->mgp;
1320        struct sk_buff *skb;
1321        struct skb_frag_struct *rx_frags;
1322        struct myri10ge_rx_buf *rx;
1323        int i, idx, remainder, bytes;
1324        struct pci_dev *pdev = mgp->pdev;
1325        struct net_device *dev = mgp->dev;
1326        u8 *va;
1327
1328        if (len <= mgp->small_bytes) {
1329                rx = &ss->rx_small;
1330                bytes = mgp->small_bytes;
1331        } else {
1332                rx = &ss->rx_big;
1333                bytes = mgp->big_bytes;
1334        }
1335
1336        len += MXGEFW_PAD;
1337        idx = rx->cnt & rx->mask;
1338        va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
1339        prefetch(va);
1340
1341        skb = napi_get_frags(&ss->napi);
1342        if (unlikely(skb == NULL)) {
1343                ss->stats.rx_dropped++;
1344                for (i = 0, remainder = len; remainder > 0; i++) {
1345                        myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1346                        put_page(rx->info[idx].page);
1347                        rx->cnt++;
1348                        idx = rx->cnt & rx->mask;
1349                        remainder -= MYRI10GE_ALLOC_SIZE;
1350                }
1351                return 0;
1352        }
1353        rx_frags = skb_shinfo(skb)->frags;
1354        /* Fill skb_frag_struct(s) with data from our receive */
1355        for (i = 0, remainder = len; remainder > 0; i++) {
1356                myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1357                skb_fill_page_desc(skb, i, rx->info[idx].page,
1358                                   rx->info[idx].page_offset,
1359                                   remainder < MYRI10GE_ALLOC_SIZE ?
1360                                   remainder : MYRI10GE_ALLOC_SIZE);
1361                rx->cnt++;
1362                idx = rx->cnt & rx->mask;
1363                remainder -= MYRI10GE_ALLOC_SIZE;
1364        }
1365
1366        /* remove padding */
1367        rx_frags[0].page_offset += MXGEFW_PAD;
1368        rx_frags[0].size -= MXGEFW_PAD;
1369        len -= MXGEFW_PAD;
1370
1371        skb->len = len;
1372        skb->data_len = len;
1373        skb->truesize += len;
1374        if (dev->features & NETIF_F_RXCSUM) {
1375                skb->ip_summed = CHECKSUM_COMPLETE;
1376                skb->csum = csum;
1377        }
1378        myri10ge_vlan_rx(mgp->dev, va, skb);
1379        skb_record_rx_queue(skb, ss - &mgp->ss[0]);
1380
1381        napi_gro_frags(&ss->napi);
1382
1383        return 1;
1384}
1385
1386static inline void
1387myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
1388{
1389        struct pci_dev *pdev = ss->mgp->pdev;
1390        struct myri10ge_tx_buf *tx = &ss->tx;
1391        struct netdev_queue *dev_queue;
1392        struct sk_buff *skb;
1393        int idx, len;
1394
1395        while (tx->pkt_done != mcp_index) {
1396                idx = tx->done & tx->mask;
1397                skb = tx->info[idx].skb;
1398
1399                /* Mark as free */
1400                tx->info[idx].skb = NULL;
1401                if (tx->info[idx].last) {
1402                        tx->pkt_done++;
1403                        tx->info[idx].last = 0;
1404                }
1405                tx->done++;
1406                len = dma_unmap_len(&tx->info[idx], len);
1407                dma_unmap_len_set(&tx->info[idx], len, 0);
1408                if (skb) {
1409                        ss->stats.tx_bytes += skb->len;
1410                        ss->stats.tx_packets++;
1411                        dev_kfree_skb_irq(skb);
1412                        if (len)
1413                                pci_unmap_single(pdev,
1414                                                 dma_unmap_addr(&tx->info[idx],
1415                                                                bus), len,
1416                                                 PCI_DMA_TODEVICE);
1417                } else {
1418                        if (len)
1419                                pci_unmap_page(pdev,
1420                                               dma_unmap_addr(&tx->info[idx],
1421                                                              bus), len,
1422                                               PCI_DMA_TODEVICE);
1423                }
1424        }
1425
1426        dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
1427        /*
1428         * Make a minimal effort to prevent the NIC from polling an
1429         * idle tx queue.  If we can't get the lock we leave the queue
1430         * active. In this case, either a thread was about to start
1431         * using the queue anyway, or we lost a race and the NIC will
1432         * waste some of its resources polling an inactive queue for a
1433         * while.
1434         */
1435
1436        if ((ss->mgp->dev->real_num_tx_queues > 1) &&
1437            __netif_tx_trylock(dev_queue)) {
1438                if (tx->req == tx->done) {
1439                        tx->queue_active = 0;
1440                        put_be32(htonl(1), tx->send_stop);
1441                        mb();
1442                        mmiowb();
1443                }
1444                __netif_tx_unlock(dev_queue);
1445        }
1446
1447        /* start the queue if we've stopped it */
1448        if (netif_tx_queue_stopped(dev_queue) &&
1449            tx->req - tx->done < (tx->mask >> 1) &&
1450            ss->mgp->running == MYRI10GE_ETH_RUNNING) {
1451                tx->wake_queue++;
1452                netif_tx_wake_queue(dev_queue);
1453        }
1454}
1455
1456static inline int
1457myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
1458{
1459        struct myri10ge_rx_done *rx_done = &ss->rx_done;
1460        struct myri10ge_priv *mgp = ss->mgp;
1461        unsigned long rx_bytes = 0;
1462        unsigned long rx_packets = 0;
1463        unsigned long rx_ok;
1464        int idx = rx_done->idx;
1465        int cnt = rx_done->cnt;
1466        int work_done = 0;
1467        u16 length;
1468        __wsum checksum;
1469
1470        while (rx_done->entry[idx].length != 0 && work_done < budget) {
1471                length = ntohs(rx_done->entry[idx].length);
1472                rx_done->entry[idx].length = 0;
1473                checksum = csum_unfold(rx_done->entry[idx].checksum);
1474                rx_ok = myri10ge_rx_done(ss, length, checksum);
1475                rx_packets += rx_ok;
1476                rx_bytes += rx_ok * (unsigned long)length;
1477                cnt++;
1478                idx = cnt & (mgp->max_intr_slots - 1);
1479                work_done++;
1480        }
1481        rx_done->idx = idx;
1482        rx_done->cnt = cnt;
1483        ss->stats.rx_packets += rx_packets;
1484        ss->stats.rx_bytes += rx_bytes;
1485
1486        /* restock receive rings if needed */
1487        if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
1488                myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1489                                        mgp->small_bytes + MXGEFW_PAD, 0);
1490        if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
1491                myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1492
1493        return work_done;
1494}
1495
1496static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
1497{
1498        struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
1499
1500        if (unlikely(stats->stats_updated)) {
1501                unsigned link_up = ntohl(stats->link_up);
1502                if (mgp->link_state != link_up) {
1503                        mgp->link_state = link_up;
1504
1505                        if (mgp->link_state == MXGEFW_LINK_UP) {
1506                                netif_info(mgp, link, mgp->dev, "link up\n");
1507                                netif_carrier_on(mgp->dev);
1508                                mgp->link_changes++;
1509                        } else {
1510                                netif_info(mgp, link, mgp->dev, "link %s\n",
1511                                           (link_up == MXGEFW_LINK_MYRINET ?
1512                                            "mismatch (Myrinet detected)" :
1513                                            "down"));
1514                                netif_carrier_off(mgp->dev);
1515                                mgp->link_changes++;
1516                        }
1517                }
1518                if (mgp->rdma_tags_available !=
1519                    ntohl(stats->rdma_tags_available)) {
1520                        mgp->rdma_tags_available =
1521                            ntohl(stats->rdma_tags_available);
1522                        netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
1523                                    mgp->rdma_tags_available);
1524                }
1525                mgp->down_cnt += stats->link_down;
1526                if (stats->link_down)
1527                        wake_up(&mgp->down_wq);
1528        }
1529}
1530
1531static int myri10ge_poll(struct napi_struct *napi, int budget)
1532{
1533        struct myri10ge_slice_state *ss =
1534            container_of(napi, struct myri10ge_slice_state, napi);
1535        int work_done;
1536
1537#ifdef CONFIG_MYRI10GE_DCA
1538        if (ss->mgp->dca_enabled)
1539                myri10ge_update_dca(ss);
1540#endif
1541        /* process as many rx events as NAPI will allow */
1542        work_done = myri10ge_clean_rx_done(ss, budget);
1543
1544        if (work_done < budget) {
1545                napi_complete_done(napi, work_done);
1546                put_be32(htonl(3), ss->irq_claim);
1547        }
1548        return work_done;
1549}
1550
1551static irqreturn_t myri10ge_intr(int irq, void *arg)
1552{
1553        struct myri10ge_slice_state *ss = arg;
1554        struct myri10ge_priv *mgp = ss->mgp;
1555        struct mcp_irq_data *stats = ss->fw_stats;
1556        struct myri10ge_tx_buf *tx = &ss->tx;
1557        u32 send_done_count;
1558        int i;
1559
1560        /* an interrupt on a non-zero receive-only slice is implicitly
1561         * valid  since MSI-X irqs are not shared */
1562        if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
1563                napi_schedule(&ss->napi);
1564                return IRQ_HANDLED;
1565        }
1566
1567        /* make sure it is our IRQ, and that the DMA has finished */
1568        if (unlikely(!stats->valid))
1569                return IRQ_NONE;
1570
1571        /* low bit indicates receives are present, so schedule
1572         * napi poll handler */
1573        if (stats->valid & 1)
1574                napi_schedule(&ss->napi);
1575
1576        if (!mgp->msi_enabled && !mgp->msix_enabled) {
1577                put_be32(0, mgp->irq_deassert);
1578                if (!myri10ge_deassert_wait)
1579                        stats->valid = 0;
1580                mb();
1581        } else
1582                stats->valid = 0;
1583
1584        /* Wait for IRQ line to go low, if using INTx */
1585        i = 0;
1586        while (1) {
1587                i++;
1588                /* check for transmit completes and receives */
1589                send_done_count = ntohl(stats->send_done_count);
1590                if (send_done_count != tx->pkt_done)
1591                        myri10ge_tx_done(ss, (int)send_done_count);
1592                if (unlikely(i > myri10ge_max_irq_loops)) {
1593                        netdev_warn(mgp->dev, "irq stuck?\n");
1594                        stats->valid = 0;
1595                        schedule_work(&mgp->watchdog_work);
1596                }
1597                if (likely(stats->valid == 0))
1598                        break;
1599                cpu_relax();
1600                barrier();
1601        }
1602
1603        /* Only slice 0 updates stats */
1604        if (ss == mgp->ss)
1605                myri10ge_check_statblock(mgp);
1606
1607        put_be32(htonl(3), ss->irq_claim + 1);
1608        return IRQ_HANDLED;
1609}
1610
1611static int
1612myri10ge_get_link_ksettings(struct net_device *netdev,
1613                            struct ethtool_link_ksettings *cmd)
1614{
1615        struct myri10ge_priv *mgp = netdev_priv(netdev);
1616        char *ptr;
1617        int i;
1618
1619        cmd->base.autoneg = AUTONEG_DISABLE;
1620        cmd->base.speed = SPEED_10000;
1621        cmd->base.duplex = DUPLEX_FULL;
1622
1623        /*
1624         * parse the product code to deterimine the interface type
1625         * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
1626         * after the 3rd dash in the driver's cached copy of the
1627         * EEPROM's product code string.
1628         */
1629        ptr = mgp->product_code_string;
1630        if (ptr == NULL) {
1631                netdev_err(netdev, "Missing product code\n");
1632                return 0;
1633        }
1634        for (i = 0; i < 3; i++, ptr++) {
1635                ptr = strchr(ptr, '-');
1636                if (ptr == NULL) {
1637                        netdev_err(netdev, "Invalid product code %s\n",
1638                                   mgp->product_code_string);
1639                        return 0;
1640                }
1641        }
1642        if (*ptr == '2')
1643                ptr++;
1644        if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') {
1645                /* We've found either an XFP, quad ribbon fiber, or SFP+ */
1646                cmd->base.port = PORT_FIBRE;
1647                ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
1648                ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
1649        } else {
1650                cmd->base.port = PORT_OTHER;
1651        }
1652
1653        return 0;
1654}
1655
1656static void
1657myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
1658{
1659        struct myri10ge_priv *mgp = netdev_priv(netdev);
1660
1661        strlcpy(info->driver, "myri10ge", sizeof(info->driver));
1662        strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
1663        strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
1664        strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
1665}
1666
1667static int
1668myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1669{
1670        struct myri10ge_priv *mgp = netdev_priv(netdev);
1671
1672        coal->rx_coalesce_usecs = mgp->intr_coal_delay;
1673        return 0;
1674}
1675
1676static int
1677myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1678{
1679        struct myri10ge_priv *mgp = netdev_priv(netdev);
1680
1681        mgp->intr_coal_delay = coal->rx_coalesce_usecs;
1682        put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1683        return 0;
1684}
1685
1686static void
1687myri10ge_get_pauseparam(struct net_device *netdev,
1688                        struct ethtool_pauseparam *pause)
1689{
1690        struct myri10ge_priv *mgp = netdev_priv(netdev);
1691
1692        pause->autoneg = 0;
1693        pause->rx_pause = mgp->pause;
1694        pause->tx_pause = mgp->pause;
1695}
1696
1697static int
1698myri10ge_set_pauseparam(struct net_device *netdev,
1699                        struct ethtool_pauseparam *pause)
1700{
1701        struct myri10ge_priv *mgp = netdev_priv(netdev);
1702
1703        if (pause->tx_pause != mgp->pause)
1704                return myri10ge_change_pause(mgp, pause->tx_pause);
1705        if (pause->rx_pause != mgp->pause)
1706                return myri10ge_change_pause(mgp, pause->rx_pause);
1707        if (pause->autoneg != 0)
1708                return -EINVAL;
1709        return 0;
1710}
1711
1712static void
1713myri10ge_get_ringparam(struct net_device *netdev,
1714                       struct ethtool_ringparam *ring)
1715{
1716        struct myri10ge_priv *mgp = netdev_priv(netdev);
1717
1718        ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
1719        ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
1720        ring->rx_jumbo_max_pending = 0;
1721        ring->tx_max_pending = mgp->ss[0].tx.mask + 1;
1722        ring->rx_mini_pending = ring->rx_mini_max_pending;
1723        ring->rx_pending = ring->rx_max_pending;
1724        ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
1725        ring->tx_pending = ring->tx_max_pending;
1726}
1727
1728static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
1729        "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1730        "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1731        "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1732        "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1733        "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1734        "tx_heartbeat_errors", "tx_window_errors",
1735        /* device-specific stats */
1736        "tx_boundary", "irq", "MSI", "MSIX",
1737        "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1738        "serial_number", "watchdog_resets",
1739#ifdef CONFIG_MYRI10GE_DCA
1740        "dca_capable_firmware", "dca_device_present",
1741#endif
1742        "link_changes", "link_up", "dropped_link_overflow",
1743        "dropped_link_error_or_filtered",
1744        "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1745        "dropped_unicast_filtered", "dropped_multicast_filtered",
1746        "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1747        "dropped_no_big_buffer"
1748};
1749
1750static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
1751        "----------- slice ---------",
1752        "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
1753        "rx_small_cnt", "rx_big_cnt",
1754        "wake_queue", "stop_queue", "tx_linearized",
1755};
1756
1757#define MYRI10GE_NET_STATS_LEN      21
1758#define MYRI10GE_MAIN_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_main_stats)
1759#define MYRI10GE_SLICE_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_slice_stats)
1760
1761static void
1762myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
1763{
1764        struct myri10ge_priv *mgp = netdev_priv(netdev);
1765        int i;
1766
1767        switch (stringset) {
1768        case ETH_SS_STATS:
1769                memcpy(data, *myri10ge_gstrings_main_stats,
1770                       sizeof(myri10ge_gstrings_main_stats));
1771                data += sizeof(myri10ge_gstrings_main_stats);
1772                for (i = 0; i < mgp->num_slices; i++) {
1773                        memcpy(data, *myri10ge_gstrings_slice_stats,
1774                               sizeof(myri10ge_gstrings_slice_stats));
1775                        data += sizeof(myri10ge_gstrings_slice_stats);
1776                }
1777                break;
1778        }
1779}
1780
1781static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
1782{
1783        struct myri10ge_priv *mgp = netdev_priv(netdev);
1784
1785        switch (sset) {
1786        case ETH_SS_STATS:
1787                return MYRI10GE_MAIN_STATS_LEN +
1788                    mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
1789        default:
1790                return -EOPNOTSUPP;
1791        }
1792}
1793
1794static void
1795myri10ge_get_ethtool_stats(struct net_device *netdev,
1796                           struct ethtool_stats *stats, u64 * data)
1797{
1798        struct myri10ge_priv *mgp = netdev_priv(netdev);
1799        struct myri10ge_slice_state *ss;
1800        struct rtnl_link_stats64 link_stats;
1801        int slice;
1802        int i;
1803
1804        /* force stats update */
1805        memset(&link_stats, 0, sizeof(link_stats));
1806        (void)myri10ge_get_stats(netdev, &link_stats);
1807        for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
1808                data[i] = ((u64 *)&link_stats)[i];
1809
1810        data[i++] = (unsigned int)mgp->tx_boundary;
1811        data[i++] = (unsigned int)mgp->pdev->irq;
1812        data[i++] = (unsigned int)mgp->msi_enabled;
1813        data[i++] = (unsigned int)mgp->msix_enabled;
1814        data[i++] = (unsigned int)mgp->read_dma;
1815        data[i++] = (unsigned int)mgp->write_dma;
1816        data[i++] = (unsigned int)mgp->read_write_dma;
1817        data[i++] = (unsigned int)mgp->serial_number;
1818        data[i++] = (unsigned int)mgp->watchdog_resets;
1819#ifdef CONFIG_MYRI10GE_DCA
1820        data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
1821        data[i++] = (unsigned int)(mgp->dca_enabled);
1822#endif
1823        data[i++] = (unsigned int)mgp->link_changes;
1824
1825        /* firmware stats are useful only in the first slice */
1826        ss = &mgp->ss[0];
1827        data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
1828        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
1829        data[i++] =
1830            (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
1831        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
1832        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
1833        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
1834        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
1835        data[i++] =
1836            (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
1837        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
1838        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
1839        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
1840        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
1841
1842        for (slice = 0; slice < mgp->num_slices; slice++) {
1843                ss = &mgp->ss[slice];
1844                data[i++] = slice;
1845                data[i++] = (unsigned int)ss->tx.pkt_start;
1846                data[i++] = (unsigned int)ss->tx.pkt_done;
1847                data[i++] = (unsigned int)ss->tx.req;
1848                data[i++] = (unsigned int)ss->tx.done;
1849                data[i++] = (unsigned int)ss->rx_small.cnt;
1850                data[i++] = (unsigned int)ss->rx_big.cnt;
1851                data[i++] = (unsigned int)ss->tx.wake_queue;
1852                data[i++] = (unsigned int)ss->tx.stop_queue;
1853                data[i++] = (unsigned int)ss->tx.linearized;
1854        }
1855}
1856
1857static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
1858{
1859        struct myri10ge_priv *mgp = netdev_priv(netdev);
1860        mgp->msg_enable = value;
1861}
1862
1863static u32 myri10ge_get_msglevel(struct net_device *netdev)
1864{
1865        struct myri10ge_priv *mgp = netdev_priv(netdev);
1866        return mgp->msg_enable;
1867}
1868
1869/*
1870 * Use a low-level command to change the LED behavior. Rather than
1871 * blinking (which is the normal case), when identify is used, the
1872 * yellow LED turns solid.
1873 */
1874static int myri10ge_led(struct myri10ge_priv *mgp, int on)
1875{
1876        struct mcp_gen_header *hdr;
1877        struct device *dev = &mgp->pdev->dev;
1878        size_t hdr_off, pattern_off, hdr_len;
1879        u32 pattern = 0xfffffffe;
1880
1881        /* find running firmware header */
1882        hdr_off = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
1883        if ((hdr_off & 3) || hdr_off + sizeof(*hdr) > mgp->sram_size) {
1884                dev_err(dev, "Running firmware has bad header offset (%d)\n",
1885                        (int)hdr_off);
1886                return -EIO;
1887        }
1888        hdr_len = swab32(readl(mgp->sram + hdr_off +
1889                               offsetof(struct mcp_gen_header, header_length)));
1890        pattern_off = hdr_off + offsetof(struct mcp_gen_header, led_pattern);
1891        if (pattern_off >= (hdr_len + hdr_off)) {
1892                dev_info(dev, "Firmware does not support LED identification\n");
1893                return -EINVAL;
1894        }
1895        if (!on)
1896                pattern = swab32(readl(mgp->sram + pattern_off + 4));
1897        writel(swab32(pattern), mgp->sram + pattern_off);
1898        return 0;
1899}
1900
1901static int
1902myri10ge_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
1903{
1904        struct myri10ge_priv *mgp = netdev_priv(netdev);
1905        int rc;
1906
1907        switch (state) {
1908        case ETHTOOL_ID_ACTIVE:
1909                rc = myri10ge_led(mgp, 1);
1910                break;
1911
1912        case ETHTOOL_ID_INACTIVE:
1913                rc =  myri10ge_led(mgp, 0);
1914                break;
1915
1916        default:
1917                rc = -EINVAL;
1918        }
1919
1920        return rc;
1921}
1922
1923static const struct ethtool_ops myri10ge_ethtool_ops = {
1924        .get_drvinfo = myri10ge_get_drvinfo,
1925        .get_coalesce = myri10ge_get_coalesce,
1926        .set_coalesce = myri10ge_set_coalesce,
1927        .get_pauseparam = myri10ge_get_pauseparam,
1928        .set_pauseparam = myri10ge_set_pauseparam,
1929        .get_ringparam = myri10ge_get_ringparam,
1930        .get_link = ethtool_op_get_link,
1931        .get_strings = myri10ge_get_strings,
1932        .get_sset_count = myri10ge_get_sset_count,
1933        .get_ethtool_stats = myri10ge_get_ethtool_stats,
1934        .set_msglevel = myri10ge_set_msglevel,
1935        .get_msglevel = myri10ge_get_msglevel,
1936        .set_phys_id = myri10ge_phys_id,
1937        .get_link_ksettings = myri10ge_get_link_ksettings,
1938};
1939
1940static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
1941{
1942        struct myri10ge_priv *mgp = ss->mgp;
1943        struct myri10ge_cmd cmd;
1944        struct net_device *dev = mgp->dev;
1945        int tx_ring_size, rx_ring_size;
1946        int tx_ring_entries, rx_ring_entries;
1947        int i, slice, status;
1948        size_t bytes;
1949
1950        /* get ring sizes */
1951        slice = ss - mgp->ss;
1952        cmd.data0 = slice;
1953        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
1954        tx_ring_size = cmd.data0;
1955        cmd.data0 = slice;
1956        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
1957        if (status != 0)
1958                return status;
1959        rx_ring_size = cmd.data0;
1960
1961        tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
1962        rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
1963        ss->tx.mask = tx_ring_entries - 1;
1964        ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
1965
1966        status = -ENOMEM;
1967
1968        /* allocate the host shadow rings */
1969
1970        bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
1971            * sizeof(*ss->tx.req_list);
1972        ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
1973        if (ss->tx.req_bytes == NULL)
1974                goto abort_with_nothing;
1975
1976        /* ensure req_list entries are aligned to 8 bytes */
1977        ss->tx.req_list = (struct mcp_kreq_ether_send *)
1978            ALIGN((unsigned long)ss->tx.req_bytes, 8);
1979        ss->tx.queue_active = 0;
1980
1981        bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
1982        ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
1983        if (ss->rx_small.shadow == NULL)
1984                goto abort_with_tx_req_bytes;
1985
1986        bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
1987        ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
1988        if (ss->rx_big.shadow == NULL)
1989                goto abort_with_rx_small_shadow;
1990
1991        /* allocate the host info rings */
1992
1993        bytes = tx_ring_entries * sizeof(*ss->tx.info);
1994        ss->tx.info = kzalloc(bytes, GFP_KERNEL);
1995        if (ss->tx.info == NULL)
1996                goto abort_with_rx_big_shadow;
1997
1998        bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
1999        ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
2000        if (ss->rx_small.info == NULL)
2001                goto abort_with_tx_info;
2002
2003        bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
2004        ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
2005        if (ss->rx_big.info == NULL)
2006                goto abort_with_rx_small_info;
2007
2008        /* Fill the receive rings */
2009        ss->rx_big.cnt = 0;
2010        ss->rx_small.cnt = 0;
2011        ss->rx_big.fill_cnt = 0;
2012        ss->rx_small.fill_cnt = 0;
2013        ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
2014        ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
2015        ss->rx_small.watchdog_needed = 0;
2016        ss->rx_big.watchdog_needed = 0;
2017        if (mgp->small_bytes == 0) {
2018                ss->rx_small.fill_cnt = ss->rx_small.mask + 1;
2019        } else {
2020                myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
2021                                        mgp->small_bytes + MXGEFW_PAD, 0);
2022        }
2023
2024        if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
2025                netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
2026                           slice, ss->rx_small.fill_cnt);
2027                goto abort_with_rx_small_ring;
2028        }
2029
2030        myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
2031        if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
2032                netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
2033                           slice, ss->rx_big.fill_cnt);
2034                goto abort_with_rx_big_ring;
2035        }
2036
2037        return 0;
2038
2039abort_with_rx_big_ring:
2040        for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2041                int idx = i & ss->rx_big.mask;
2042                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2043                                       mgp->big_bytes);
2044                put_page(ss->rx_big.info[idx].page);
2045        }
2046
2047abort_with_rx_small_ring:
2048        if (mgp->small_bytes == 0)
2049                ss->rx_small.fill_cnt = ss->rx_small.cnt;
2050        for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2051                int idx = i & ss->rx_small.mask;
2052                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2053                                       mgp->small_bytes + MXGEFW_PAD);
2054                put_page(ss->rx_small.info[idx].page);
2055        }
2056
2057        kfree(ss->rx_big.info);
2058
2059abort_with_rx_small_info:
2060        kfree(ss->rx_small.info);
2061
2062abort_with_tx_info:
2063        kfree(ss->tx.info);
2064
2065abort_with_rx_big_shadow:
2066        kfree(ss->rx_big.shadow);
2067
2068abort_with_rx_small_shadow:
2069        kfree(ss->rx_small.shadow);
2070
2071abort_with_tx_req_bytes:
2072        kfree(ss->tx.req_bytes);
2073        ss->tx.req_bytes = NULL;
2074        ss->tx.req_list = NULL;
2075
2076abort_with_nothing:
2077        return status;
2078}
2079
2080static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
2081{
2082        struct myri10ge_priv *mgp = ss->mgp;
2083        struct sk_buff *skb;
2084        struct myri10ge_tx_buf *tx;
2085        int i, len, idx;
2086
2087        /* If not allocated, skip it */
2088        if (ss->tx.req_list == NULL)
2089                return;
2090
2091        for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2092                idx = i & ss->rx_big.mask;
2093                if (i == ss->rx_big.fill_cnt - 1)
2094                        ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
2095                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2096                                       mgp->big_bytes);
2097                put_page(ss->rx_big.info[idx].page);
2098        }
2099
2100        if (mgp->small_bytes == 0)
2101                ss->rx_small.fill_cnt = ss->rx_small.cnt;
2102        for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2103                idx = i & ss->rx_small.mask;
2104                if (i == ss->rx_small.fill_cnt - 1)
2105                        ss->rx_small.info[idx].page_offset =
2106                            MYRI10GE_ALLOC_SIZE;
2107                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2108                                       mgp->small_bytes + MXGEFW_PAD);
2109                put_page(ss->rx_small.info[idx].page);
2110        }
2111        tx = &ss->tx;
2112        while (tx->done != tx->req) {
2113                idx = tx->done & tx->mask;
2114                skb = tx->info[idx].skb;
2115
2116                /* Mark as free */
2117                tx->info[idx].skb = NULL;
2118                tx->done++;
2119                len = dma_unmap_len(&tx->info[idx], len);
2120                dma_unmap_len_set(&tx->info[idx], len, 0);
2121                if (skb) {
2122                        ss->stats.tx_dropped++;
2123                        dev_kfree_skb_any(skb);
2124                        if (len)
2125                                pci_unmap_single(mgp->pdev,
2126                                                 dma_unmap_addr(&tx->info[idx],
2127                                                                bus), len,
2128                                                 PCI_DMA_TODEVICE);
2129                } else {
2130                        if (len)
2131                                pci_unmap_page(mgp->pdev,
2132                                               dma_unmap_addr(&tx->info[idx],
2133                                                              bus), len,
2134                                               PCI_DMA_TODEVICE);
2135                }
2136        }
2137        kfree(ss->rx_big.info);
2138
2139        kfree(ss->rx_small.info);
2140
2141        kfree(ss->tx.info);
2142
2143        kfree(ss->rx_big.shadow);
2144
2145        kfree(ss->rx_small.shadow);
2146
2147        kfree(ss->tx.req_bytes);
2148        ss->tx.req_bytes = NULL;
2149        ss->tx.req_list = NULL;
2150}
2151
2152static int myri10ge_request_irq(struct myri10ge_priv *mgp)
2153{
2154        struct pci_dev *pdev = mgp->pdev;
2155        struct myri10ge_slice_state *ss;
2156        struct net_device *netdev = mgp->dev;
2157        int i;
2158        int status;
2159
2160        mgp->msi_enabled = 0;
2161        mgp->msix_enabled = 0;
2162        status = 0;
2163        if (myri10ge_msi) {
2164                if (mgp->num_slices > 1) {
2165                        status = pci_enable_msix_range(pdev, mgp->msix_vectors,
2166                                        mgp->num_slices, mgp->num_slices);
2167                        if (status < 0) {
2168                                dev_err(&pdev->dev,
2169                                        "Error %d setting up MSI-X\n", status);
2170                                return status;
2171                        }
2172                        mgp->msix_enabled = 1;
2173                }
2174                if (mgp->msix_enabled == 0) {
2175                        status = pci_enable_msi(pdev);
2176                        if (status != 0) {
2177                                dev_err(&pdev->dev,
2178                                        "Error %d setting up MSI; falling back to xPIC\n",
2179                                        status);
2180                        } else {
2181                                mgp->msi_enabled = 1;
2182                        }
2183                }
2184        }
2185        if (mgp->msix_enabled) {
2186                for (i = 0; i < mgp->num_slices; i++) {
2187                        ss = &mgp->ss[i];
2188                        snprintf(ss->irq_desc, sizeof(ss->irq_desc),
2189                                 "%s:slice-%d", netdev->name, i);
2190                        status = request_irq(mgp->msix_vectors[i].vector,
2191                                             myri10ge_intr, 0, ss->irq_desc,
2192                                             ss);
2193                        if (status != 0) {
2194                                dev_err(&pdev->dev,
2195                                        "slice %d failed to allocate IRQ\n", i);
2196                                i--;
2197                                while (i >= 0) {
2198                                        free_irq(mgp->msix_vectors[i].vector,
2199                                                 &mgp->ss[i]);
2200                                        i--;
2201                                }
2202                                pci_disable_msix(pdev);
2203                                return status;
2204                        }
2205                }
2206        } else {
2207                status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
2208                                     mgp->dev->name, &mgp->ss[0]);
2209                if (status != 0) {
2210                        dev_err(&pdev->dev, "failed to allocate IRQ\n");
2211                        if (mgp->msi_enabled)
2212                                pci_disable_msi(pdev);
2213                }
2214        }
2215        return status;
2216}
2217
2218static void myri10ge_free_irq(struct myri10ge_priv *mgp)
2219{
2220        struct pci_dev *pdev = mgp->pdev;
2221        int i;
2222
2223        if (mgp->msix_enabled) {
2224                for (i = 0; i < mgp->num_slices; i++)
2225                        free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
2226        } else {
2227                free_irq(pdev->irq, &mgp->ss[0]);
2228        }
2229        if (mgp->msi_enabled)
2230                pci_disable_msi(pdev);
2231        if (mgp->msix_enabled)
2232                pci_disable_msix(pdev);
2233}
2234
2235static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
2236{
2237        struct myri10ge_cmd cmd;
2238        struct myri10ge_slice_state *ss;
2239        int status;
2240
2241        ss = &mgp->ss[slice];
2242        status = 0;
2243        if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
2244                cmd.data0 = slice;
2245                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
2246                                           &cmd, 0);
2247                ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
2248                    (mgp->sram + cmd.data0);
2249        }
2250        cmd.data0 = slice;
2251        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
2252                                    &cmd, 0);
2253        ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
2254            (mgp->sram + cmd.data0);
2255
2256        cmd.data0 = slice;
2257        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
2258        ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
2259            (mgp->sram + cmd.data0);
2260
2261        ss->tx.send_go = (__iomem __be32 *)
2262            (mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
2263        ss->tx.send_stop = (__iomem __be32 *)
2264            (mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
2265        return status;
2266
2267}
2268
2269static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
2270{
2271        struct myri10ge_cmd cmd;
2272        struct myri10ge_slice_state *ss;
2273        int status;
2274
2275        ss = &mgp->ss[slice];
2276        cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
2277        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
2278        cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
2279        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
2280        if (status == -ENOSYS) {
2281                dma_addr_t bus = ss->fw_stats_bus;
2282                if (slice != 0)
2283                        return -EINVAL;
2284                bus += offsetof(struct mcp_irq_data, send_done_count);
2285                cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
2286                cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
2287                status = myri10ge_send_cmd(mgp,
2288                                           MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
2289                                           &cmd, 0);
2290                /* Firmware cannot support multicast without STATS_DMA_V2 */
2291                mgp->fw_multicast_support = 0;
2292        } else {
2293                mgp->fw_multicast_support = 1;
2294        }
2295        return 0;
2296}
2297
2298static int myri10ge_open(struct net_device *dev)
2299{
2300        struct myri10ge_slice_state *ss;
2301        struct myri10ge_priv *mgp = netdev_priv(dev);
2302        struct myri10ge_cmd cmd;
2303        int i, status, big_pow2, slice;
2304        u8 __iomem *itable;
2305
2306        if (mgp->running != MYRI10GE_ETH_STOPPED)
2307                return -EBUSY;
2308
2309        mgp->running = MYRI10GE_ETH_STARTING;
2310        status = myri10ge_reset(mgp);
2311        if (status != 0) {
2312                netdev_err(dev, "failed reset\n");
2313                goto abort_with_nothing;
2314        }
2315
2316        if (mgp->num_slices > 1) {
2317                cmd.data0 = mgp->num_slices;
2318                cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
2319                if (mgp->dev->real_num_tx_queues > 1)
2320                        cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
2321                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
2322                                           &cmd, 0);
2323                if (status != 0) {
2324                        netdev_err(dev, "failed to set number of slices\n");
2325                        goto abort_with_nothing;
2326                }
2327                /* setup the indirection table */
2328                cmd.data0 = mgp->num_slices;
2329                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
2330                                           &cmd, 0);
2331
2332                status |= myri10ge_send_cmd(mgp,
2333                                            MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
2334                                            &cmd, 0);
2335                if (status != 0) {
2336                        netdev_err(dev, "failed to setup rss tables\n");
2337                        goto abort_with_nothing;
2338                }
2339
2340                /* just enable an identity mapping */
2341                itable = mgp->sram + cmd.data0;
2342                for (i = 0; i < mgp->num_slices; i++)
2343                        __raw_writeb(i, &itable[i]);
2344
2345                cmd.data0 = 1;
2346                cmd.data1 = myri10ge_rss_hash;
2347                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
2348                                           &cmd, 0);
2349                if (status != 0) {
2350                        netdev_err(dev, "failed to enable slices\n");
2351                        goto abort_with_nothing;
2352                }
2353        }
2354
2355        status = myri10ge_request_irq(mgp);
2356        if (status != 0)
2357                goto abort_with_nothing;
2358
2359        /* decide what small buffer size to use.  For good TCP rx
2360         * performance, it is important to not receive 1514 byte
2361         * frames into jumbo buffers, as it confuses the socket buffer
2362         * accounting code, leading to drops and erratic performance.
2363         */
2364
2365        if (dev->mtu <= ETH_DATA_LEN)
2366                /* enough for a TCP header */
2367                mgp->small_bytes = (128 > SMP_CACHE_BYTES)
2368                    ? (128 - MXGEFW_PAD)
2369                    : (SMP_CACHE_BYTES - MXGEFW_PAD);
2370        else
2371                /* enough for a vlan encapsulated ETH_DATA_LEN frame */
2372                mgp->small_bytes = VLAN_ETH_FRAME_LEN;
2373
2374        /* Override the small buffer size? */
2375        if (myri10ge_small_bytes >= 0)
2376                mgp->small_bytes = myri10ge_small_bytes;
2377
2378        /* Firmware needs the big buff size as a power of 2.  Lie and
2379         * tell him the buffer is larger, because we only use 1
2380         * buffer/pkt, and the mtu will prevent overruns.
2381         */
2382        big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2383        if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
2384                while (!is_power_of_2(big_pow2))
2385                        big_pow2++;
2386                mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2387        } else {
2388                big_pow2 = MYRI10GE_ALLOC_SIZE;
2389                mgp->big_bytes = big_pow2;
2390        }
2391
2392        /* setup the per-slice data structures */
2393        for (slice = 0; slice < mgp->num_slices; slice++) {
2394                ss = &mgp->ss[slice];
2395
2396                status = myri10ge_get_txrx(mgp, slice);
2397                if (status != 0) {
2398                        netdev_err(dev, "failed to get ring sizes or locations\n");
2399                        goto abort_with_rings;
2400                }
2401                status = myri10ge_allocate_rings(ss);
2402                if (status != 0)
2403                        goto abort_with_rings;
2404
2405                /* only firmware which supports multiple TX queues
2406                 * supports setting up the tx stats on non-zero
2407                 * slices */
2408                if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
2409                        status = myri10ge_set_stats(mgp, slice);
2410                if (status) {
2411                        netdev_err(dev, "Couldn't set stats DMA\n");
2412                        goto abort_with_rings;
2413                }
2414
2415                /* must happen prior to any irq */
2416                napi_enable(&(ss)->napi);
2417        }
2418
2419        /* now give firmware buffers sizes, and MTU */
2420        cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
2421        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
2422        cmd.data0 = mgp->small_bytes;
2423        status |=
2424            myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
2425        cmd.data0 = big_pow2;
2426        status |=
2427            myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
2428        if (status) {
2429                netdev_err(dev, "Couldn't set buffer sizes\n");
2430                goto abort_with_rings;
2431        }
2432
2433        /*
2434         * Set Linux style TSO mode; this is needed only on newer
2435         *  firmware versions.  Older versions default to Linux
2436         *  style TSO
2437         */
2438        cmd.data0 = 0;
2439        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
2440        if (status && status != -ENOSYS) {
2441                netdev_err(dev, "Couldn't set TSO mode\n");
2442                goto abort_with_rings;
2443        }
2444
2445        mgp->link_state = ~0U;
2446        mgp->rdma_tags_available = 15;
2447
2448        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
2449        if (status) {
2450                netdev_err(dev, "Couldn't bring up link\n");
2451                goto abort_with_rings;
2452        }
2453
2454        mgp->running = MYRI10GE_ETH_RUNNING;
2455        mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
2456        add_timer(&mgp->watchdog_timer);
2457        netif_tx_wake_all_queues(dev);
2458
2459        return 0;
2460
2461abort_with_rings:
2462        while (slice) {
2463                slice--;
2464                napi_disable(&mgp->ss[slice].napi);
2465        }
2466        for (i = 0; i < mgp->num_slices; i++)
2467                myri10ge_free_rings(&mgp->ss[i]);
2468
2469        myri10ge_free_irq(mgp);
2470
2471abort_with_nothing:
2472        mgp->running = MYRI10GE_ETH_STOPPED;
2473        return -ENOMEM;
2474}
2475
2476static int myri10ge_close(struct net_device *dev)
2477{
2478        struct myri10ge_priv *mgp = netdev_priv(dev);
2479        struct myri10ge_cmd cmd;
2480        int status, old_down_cnt;
2481        int i;
2482
2483        if (mgp->running != MYRI10GE_ETH_RUNNING)
2484                return 0;
2485
2486        if (mgp->ss[0].tx.req_bytes == NULL)
2487                return 0;
2488
2489        del_timer_sync(&mgp->watchdog_timer);
2490        mgp->running = MYRI10GE_ETH_STOPPING;
2491        for (i = 0; i < mgp->num_slices; i++)
2492                napi_disable(&mgp->ss[i].napi);
2493
2494        netif_carrier_off(dev);
2495
2496        netif_tx_stop_all_queues(dev);
2497        if (mgp->rebooted == 0) {
2498                old_down_cnt = mgp->down_cnt;
2499                mb();
2500                status =
2501                    myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
2502                if (status)
2503                        netdev_err(dev, "Couldn't bring down link\n");
2504
2505                wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
2506                                   HZ);
2507                if (old_down_cnt == mgp->down_cnt)
2508                        netdev_err(dev, "never got down irq\n");
2509        }
2510        netif_tx_disable(dev);
2511        myri10ge_free_irq(mgp);
2512        for (i = 0; i < mgp->num_slices; i++)
2513                myri10ge_free_rings(&mgp->ss[i]);
2514
2515        mgp->running = MYRI10GE_ETH_STOPPED;
2516        return 0;
2517}
2518
2519/* copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2520 * backwards one at a time and handle ring wraps */
2521
2522static inline void
2523myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
2524                              struct mcp_kreq_ether_send *src, int cnt)
2525{
2526        int idx, starting_slot;
2527        starting_slot = tx->req;
2528        while (cnt > 1) {
2529                cnt--;
2530                idx = (starting_slot + cnt) & tx->mask;
2531                myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
2532                mb();
2533        }
2534}
2535
2536/*
2537 * copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2538 * at most 32 bytes at a time, so as to avoid involving the software
2539 * pio handler in the nic.   We re-write the first segment's flags
2540 * to mark them valid only after writing the entire chain.
2541 */
2542
2543static inline void
2544myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
2545                    int cnt)
2546{
2547        int idx, i;
2548        struct mcp_kreq_ether_send __iomem *dstp, *dst;
2549        struct mcp_kreq_ether_send *srcp;
2550        u8 last_flags;
2551
2552        idx = tx->req & tx->mask;
2553
2554        last_flags = src->flags;
2555        src->flags = 0;
2556        mb();
2557        dst = dstp = &tx->lanai[idx];
2558        srcp = src;
2559
2560        if ((idx + cnt) < tx->mask) {
2561                for (i = 0; i < (cnt - 1); i += 2) {
2562                        myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
2563                        mb();   /* force write every 32 bytes */
2564                        srcp += 2;
2565                        dstp += 2;
2566                }
2567        } else {
2568                /* submit all but the first request, and ensure
2569                 * that it is submitted below */
2570                myri10ge_submit_req_backwards(tx, src, cnt);
2571                i = 0;
2572        }
2573        if (i < cnt) {
2574                /* submit the first request */
2575                myri10ge_pio_copy(dstp, srcp, sizeof(*src));
2576                mb();           /* barrier before setting valid flag */
2577        }
2578
2579        /* re-write the last 32-bits with the valid flags */
2580        src->flags = last_flags;
2581        put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
2582        tx->req += cnt;
2583        mb();
2584}
2585
2586static void myri10ge_unmap_tx_dma(struct myri10ge_priv *mgp,
2587                                  struct myri10ge_tx_buf *tx, int idx)
2588{
2589        unsigned int len;
2590        int last_idx;
2591
2592        /* Free any DMA resources we've alloced and clear out the skb slot */
2593        last_idx = (idx + 1) & tx->mask;
2594        idx = tx->req & tx->mask;
2595        do {
2596                len = dma_unmap_len(&tx->info[idx], len);
2597                if (len) {
2598                        if (tx->info[idx].skb != NULL)
2599                                pci_unmap_single(mgp->pdev,
2600                                                 dma_unmap_addr(&tx->info[idx],
2601                                                                bus), len,
2602                                                 PCI_DMA_TODEVICE);
2603                        else
2604                                pci_unmap_page(mgp->pdev,
2605                                               dma_unmap_addr(&tx->info[idx],
2606                                                              bus), len,
2607                                               PCI_DMA_TODEVICE);
2608                        dma_unmap_len_set(&tx->info[idx], len, 0);
2609                        tx->info[idx].skb = NULL;
2610                }
2611                idx = (idx + 1) & tx->mask;
2612        } while (idx != last_idx);
2613}
2614
2615/*
2616 * Transmit a packet.  We need to split the packet so that a single
2617 * segment does not cross myri10ge->tx_boundary, so this makes segment
2618 * counting tricky.  So rather than try to count segments up front, we
2619 * just give up if there are too few segments to hold a reasonably
2620 * fragmented packet currently available.  If we run
2621 * out of segments while preparing a packet for DMA, we just linearize
2622 * it and try again.
2623 */
2624
2625static netdev_tx_t myri10ge_xmit(struct sk_buff *skb,
2626                                       struct net_device *dev)
2627{
2628        struct myri10ge_priv *mgp = netdev_priv(dev);
2629        struct myri10ge_slice_state *ss;
2630        struct mcp_kreq_ether_send *req;
2631        struct myri10ge_tx_buf *tx;
2632        struct skb_frag_struct *frag;
2633        struct netdev_queue *netdev_queue;
2634        dma_addr_t bus;
2635        u32 low;
2636        __be32 high_swapped;
2637        unsigned int len;
2638        int idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
2639        u16 pseudo_hdr_offset, cksum_offset, queue;
2640        int cum_len, seglen, boundary, rdma_count;
2641        u8 flags, odd_flag;
2642
2643        queue = skb_get_queue_mapping(skb);
2644        ss = &mgp->ss[queue];
2645        netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
2646        tx = &ss->tx;
2647
2648again:
2649        req = tx->req_list;
2650        avail = tx->mask - 1 - (tx->req - tx->done);
2651
2652        mss = 0;
2653        max_segments = MXGEFW_MAX_SEND_DESC;
2654
2655        if (skb_is_gso(skb)) {
2656                mss = skb_shinfo(skb)->gso_size;
2657                max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
2658        }
2659
2660        if ((unlikely(avail < max_segments))) {
2661                /* we are out of transmit resources */
2662                tx->stop_queue++;
2663                netif_tx_stop_queue(netdev_queue);
2664                return NETDEV_TX_BUSY;
2665        }
2666
2667        /* Setup checksum offloading, if needed */
2668        cksum_offset = 0;
2669        pseudo_hdr_offset = 0;
2670        odd_flag = 0;
2671        flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
2672        if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2673                cksum_offset = skb_checksum_start_offset(skb);
2674                pseudo_hdr_offset = cksum_offset + skb->csum_offset;
2675                /* If the headers are excessively large, then we must
2676                 * fall back to a software checksum */
2677                if (unlikely(!mss && (cksum_offset > 255 ||
2678                                      pseudo_hdr_offset > 127))) {
2679                        if (skb_checksum_help(skb))
2680                                goto drop;
2681                        cksum_offset = 0;
2682                        pseudo_hdr_offset = 0;
2683                } else {
2684                        odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
2685                        flags |= MXGEFW_FLAGS_CKSUM;
2686                }
2687        }
2688
2689        cum_len = 0;
2690
2691        if (mss) {              /* TSO */
2692                /* this removes any CKSUM flag from before */
2693                flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
2694
2695                /* negative cum_len signifies to the
2696                 * send loop that we are still in the
2697                 * header portion of the TSO packet.
2698                 * TSO header can be at most 1KB long */
2699                cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
2700
2701                /* for IPv6 TSO, the checksum offset stores the
2702                 * TCP header length, to save the firmware from
2703                 * the need to parse the headers */
2704                if (skb_is_gso_v6(skb)) {
2705                        cksum_offset = tcp_hdrlen(skb);
2706                        /* Can only handle headers <= max_tso6 long */
2707                        if (unlikely(-cum_len > mgp->max_tso6))
2708                                return myri10ge_sw_tso(skb, dev);
2709                }
2710                /* for TSO, pseudo_hdr_offset holds mss.
2711                 * The firmware figures out where to put
2712                 * the checksum by parsing the header. */
2713                pseudo_hdr_offset = mss;
2714        } else
2715                /* Mark small packets, and pad out tiny packets */
2716        if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
2717                flags |= MXGEFW_FLAGS_SMALL;
2718
2719                /* pad frames to at least ETH_ZLEN bytes */
2720                if (eth_skb_pad(skb)) {
2721                        /* The packet is gone, so we must
2722                         * return 0 */
2723                        ss->stats.tx_dropped += 1;
2724                        return NETDEV_TX_OK;
2725                }
2726        }
2727
2728        /* map the skb for DMA */
2729        len = skb_headlen(skb);
2730        bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
2731        if (unlikely(pci_dma_mapping_error(mgp->pdev, bus)))
2732                goto drop;
2733
2734        idx = tx->req & tx->mask;
2735        tx->info[idx].skb = skb;
2736        dma_unmap_addr_set(&tx->info[idx], bus, bus);
2737        dma_unmap_len_set(&tx->info[idx], len, len);
2738
2739        frag_cnt = skb_shinfo(skb)->nr_frags;
2740        frag_idx = 0;
2741        count = 0;
2742        rdma_count = 0;
2743
2744        /* "rdma_count" is the number of RDMAs belonging to the
2745         * current packet BEFORE the current send request. For
2746         * non-TSO packets, this is equal to "count".
2747         * For TSO packets, rdma_count needs to be reset
2748         * to 0 after a segment cut.
2749         *
2750         * The rdma_count field of the send request is
2751         * the number of RDMAs of the packet starting at
2752         * that request. For TSO send requests with one ore more cuts
2753         * in the middle, this is the number of RDMAs starting
2754         * after the last cut in the request. All previous
2755         * segments before the last cut implicitly have 1 RDMA.
2756         *
2757         * Since the number of RDMAs is not known beforehand,
2758         * it must be filled-in retroactively - after each
2759         * segmentation cut or at the end of the entire packet.
2760         */
2761
2762        while (1) {
2763                /* Break the SKB or Fragment up into pieces which
2764                 * do not cross mgp->tx_boundary */
2765                low = MYRI10GE_LOWPART_TO_U32(bus);
2766                high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
2767                while (len) {
2768                        u8 flags_next;
2769                        int cum_len_next;
2770
2771                        if (unlikely(count == max_segments))
2772                                goto abort_linearize;
2773
2774                        boundary =
2775                            (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
2776                        seglen = boundary - low;
2777                        if (seglen > len)
2778                                seglen = len;
2779                        flags_next = flags & ~MXGEFW_FLAGS_FIRST;
2780                        cum_len_next = cum_len + seglen;
2781                        if (mss) {      /* TSO */
2782                                (req - rdma_count)->rdma_count = rdma_count + 1;
2783
2784                                if (likely(cum_len >= 0)) {     /* payload */
2785                                        int next_is_first, chop;
2786
2787                                        chop = (cum_len_next > mss);
2788                                        cum_len_next = cum_len_next % mss;
2789                                        next_is_first = (cum_len_next == 0);
2790                                        flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
2791                                        flags_next |= next_is_first *
2792                                            MXGEFW_FLAGS_FIRST;
2793                                        rdma_count |= -(chop | next_is_first);
2794                                        rdma_count += chop & ~next_is_first;
2795                                } else if (likely(cum_len_next >= 0)) { /* header ends */
2796                                        int small;
2797
2798                                        rdma_count = -1;
2799                                        cum_len_next = 0;
2800                                        seglen = -cum_len;
2801                                        small = (mss <= MXGEFW_SEND_SMALL_SIZE);
2802                                        flags_next = MXGEFW_FLAGS_TSO_PLD |
2803                                            MXGEFW_FLAGS_FIRST |
2804                                            (small * MXGEFW_FLAGS_SMALL);
2805                                }
2806                        }
2807                        req->addr_high = high_swapped;
2808                        req->addr_low = htonl(low);
2809                        req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
2810                        req->pad = 0;   /* complete solid 16-byte block; does this matter? */
2811                        req->rdma_count = 1;
2812                        req->length = htons(seglen);
2813                        req->cksum_offset = cksum_offset;
2814                        req->flags = flags | ((cum_len & 1) * odd_flag);
2815
2816                        low += seglen;
2817                        len -= seglen;
2818                        cum_len = cum_len_next;
2819                        flags = flags_next;
2820                        req++;
2821                        count++;
2822                        rdma_count++;
2823                        if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
2824                                if (unlikely(cksum_offset > seglen))
2825                                        cksum_offset -= seglen;
2826                                else
2827                                        cksum_offset = 0;
2828                        }
2829                }
2830                if (frag_idx == frag_cnt)
2831                        break;
2832
2833                /* map next fragment for DMA */
2834                frag = &skb_shinfo(skb)->frags[frag_idx];
2835                frag_idx++;
2836                len = skb_frag_size(frag);
2837                bus = skb_frag_dma_map(&mgp->pdev->dev, frag, 0, len,
2838                                       DMA_TO_DEVICE);
2839                if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
2840                        myri10ge_unmap_tx_dma(mgp, tx, idx);
2841                        goto drop;
2842                }
2843                idx = (count + tx->req) & tx->mask;
2844                dma_unmap_addr_set(&tx->info[idx], bus, bus);
2845                dma_unmap_len_set(&tx->info[idx], len, len);
2846        }
2847
2848        (req - rdma_count)->rdma_count = rdma_count;
2849        if (mss)
2850                do {
2851                        req--;
2852                        req->flags |= MXGEFW_FLAGS_TSO_LAST;
2853                } while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
2854                                         MXGEFW_FLAGS_FIRST)));
2855        idx = ((count - 1) + tx->req) & tx->mask;
2856        tx->info[idx].last = 1;
2857        myri10ge_submit_req(tx, tx->req_list, count);
2858        /* if using multiple tx queues, make sure NIC polls the
2859         * current slice */
2860        if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
2861                tx->queue_active = 1;
2862                put_be32(htonl(1), tx->send_go);
2863                mb();
2864                mmiowb();
2865        }
2866        tx->pkt_start++;
2867        if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
2868                tx->stop_queue++;
2869                netif_tx_stop_queue(netdev_queue);
2870        }
2871        return NETDEV_TX_OK;
2872
2873abort_linearize:
2874        myri10ge_unmap_tx_dma(mgp, tx, idx);
2875
2876        if (skb_is_gso(skb)) {
2877                netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
2878                goto drop;
2879        }
2880
2881        if (skb_linearize(skb))
2882                goto drop;
2883
2884        tx->linearized++;
2885        goto again;
2886
2887drop:
2888        dev_kfree_skb_any(skb);
2889        ss->stats.tx_dropped += 1;
2890        return NETDEV_TX_OK;
2891
2892}
2893
2894static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
2895                                         struct net_device *dev)
2896{
2897        struct sk_buff *segs, *curr;
2898        struct myri10ge_priv *mgp = netdev_priv(dev);
2899        struct myri10ge_slice_state *ss;
2900        netdev_tx_t status;
2901
2902        segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
2903        if (IS_ERR(segs))
2904                goto drop;
2905
2906        while (segs) {
2907                curr = segs;
2908                segs = segs->next;
2909                curr->next = NULL;
2910                status = myri10ge_xmit(curr, dev);
2911                if (status != 0) {
2912                        dev_kfree_skb_any(curr);
2913                        if (segs != NULL) {
2914                                curr = segs;
2915                                segs = segs->next;
2916                                curr->next = NULL;
2917                                dev_kfree_skb_any(segs);
2918                        }
2919                        goto drop;
2920                }
2921        }
2922        dev_kfree_skb_any(skb);
2923        return NETDEV_TX_OK;
2924
2925drop:
2926        ss = &mgp->ss[skb_get_queue_mapping(skb)];
2927        dev_kfree_skb_any(skb);
2928        ss->stats.tx_dropped += 1;
2929        return NETDEV_TX_OK;
2930}
2931
2932static void myri10ge_get_stats(struct net_device *dev,
2933                               struct rtnl_link_stats64 *stats)
2934{
2935        const struct myri10ge_priv *mgp = netdev_priv(dev);
2936        const struct myri10ge_slice_netstats *slice_stats;
2937        int i;
2938
2939        for (i = 0; i < mgp->num_slices; i++) {
2940                slice_stats = &mgp->ss[i].stats;
2941                stats->rx_packets += slice_stats->rx_packets;
2942                stats->tx_packets += slice_stats->tx_packets;
2943                stats->rx_bytes += slice_stats->rx_bytes;
2944                stats->tx_bytes += slice_stats->tx_bytes;
2945                stats->rx_dropped += slice_stats->rx_dropped;
2946                stats->tx_dropped += slice_stats->tx_dropped;
2947        }
2948}
2949
2950static void myri10ge_set_multicast_list(struct net_device *dev)
2951{
2952        struct myri10ge_priv *mgp = netdev_priv(dev);
2953        struct myri10ge_cmd cmd;
2954        struct netdev_hw_addr *ha;
2955        __be32 data[2] = { 0, 0 };
2956        int err;
2957
2958        /* can be called from atomic contexts,
2959         * pass 1 to force atomicity in myri10ge_send_cmd() */
2960        myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
2961
2962        /* This firmware is known to not support multicast */
2963        if (!mgp->fw_multicast_support)
2964                return;
2965
2966        /* Disable multicast filtering */
2967
2968        err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
2969        if (err != 0) {
2970                netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
2971                           err);
2972                goto abort;
2973        }
2974
2975        if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
2976                /* request to disable multicast filtering, so quit here */
2977                return;
2978        }
2979
2980        /* Flush the filters */
2981
2982        err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
2983                                &cmd, 1);
2984        if (err != 0) {
2985                netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
2986                           err);
2987                goto abort;
2988        }
2989
2990        /* Walk the multicast list, and add each address */
2991        netdev_for_each_mc_addr(ha, dev) {
2992                memcpy(data, &ha->addr, ETH_ALEN);
2993                cmd.data0 = ntohl(data[0]);
2994                cmd.data1 = ntohl(data[1]);
2995                err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
2996                                        &cmd, 1);
2997
2998                if (err != 0) {
2999                        netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
3000                                   err, ha->addr);
3001                        goto abort;
3002                }
3003        }
3004        /* Enable multicast filtering */
3005        err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
3006        if (err != 0) {
3007                netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
3008                           err);
3009                goto abort;
3010        }
3011
3012        return;
3013
3014abort:
3015        return;
3016}
3017
3018static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
3019{
3020        struct sockaddr *sa = addr;
3021        struct myri10ge_priv *mgp = netdev_priv(dev);
3022        int status;
3023
3024        if (!is_valid_ether_addr(sa->sa_data))
3025                return -EADDRNOTAVAIL;
3026
3027        status = myri10ge_update_mac_address(mgp, sa->sa_data);
3028        if (status != 0) {
3029                netdev_err(dev, "changing mac address failed with %d\n",
3030                           status);
3031                return status;
3032        }
3033
3034        /* change the dev structure */
3035        memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
3036        return 0;
3037}
3038
3039static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
3040{
3041        struct myri10ge_priv *mgp = netdev_priv(dev);
3042        int error = 0;
3043
3044        netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
3045        if (mgp->running) {
3046                /* if we change the mtu on an active device, we must
3047                 * reset the device so the firmware sees the change */
3048                myri10ge_close(dev);
3049                dev->mtu = new_mtu;
3050                myri10ge_open(dev);
3051        } else
3052                dev->mtu = new_mtu;
3053
3054        return error;
3055}
3056
3057/*
3058 * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
3059 * Only do it if the bridge is a root port since we don't want to disturb
3060 * any other device, except if forced with myri10ge_ecrc_enable > 1.
3061 */
3062
3063static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
3064{
3065        struct pci_dev *bridge = mgp->pdev->bus->self;
3066        struct device *dev = &mgp->pdev->dev;
3067        int cap;
3068        unsigned err_cap;
3069        int ret;
3070
3071        if (!myri10ge_ecrc_enable || !bridge)
3072                return;
3073
3074        /* check that the bridge is a root port */
3075        if (pci_pcie_type(bridge) != PCI_EXP_TYPE_ROOT_PORT) {
3076                if (myri10ge_ecrc_enable > 1) {
3077                        struct pci_dev *prev_bridge, *old_bridge = bridge;
3078
3079                        /* Walk the hierarchy up to the root port
3080                         * where ECRC has to be enabled */
3081                        do {
3082                                prev_bridge = bridge;
3083                                bridge = bridge->bus->self;
3084                                if (!bridge || prev_bridge == bridge) {
3085                                        dev_err(dev,
3086                                                "Failed to find root port"
3087                                                " to force ECRC\n");
3088                                        return;
3089                                }
3090                        } while (pci_pcie_type(bridge) !=
3091                                 PCI_EXP_TYPE_ROOT_PORT);
3092
3093                        dev_info(dev,
3094                                 "Forcing ECRC on non-root port %s"
3095                                 " (enabling on root port %s)\n",
3096                                 pci_name(old_bridge), pci_name(bridge));
3097                } else {
3098                        dev_err(dev,
3099                                "Not enabling ECRC on non-root port %s\n",
3100                                pci_name(bridge));
3101                        return;
3102                }
3103        }
3104
3105        cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3106        if (!cap)
3107                return;
3108
3109        ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
3110        if (ret) {
3111                dev_err(dev, "failed reading ext-conf-space of %s\n",
3112                        pci_name(bridge));
3113                dev_err(dev, "\t pci=nommconf in use? "
3114                        "or buggy/incomplete/absent ACPI MCFG attr?\n");
3115                return;
3116        }
3117        if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
3118                return;
3119
3120        err_cap |= PCI_ERR_CAP_ECRC_GENE;
3121        pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
3122        dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
3123}
3124
3125/*
3126 * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
3127 * when the PCI-E Completion packets are aligned on an 8-byte
3128 * boundary.  Some PCI-E chip sets always align Completion packets; on
3129 * the ones that do not, the alignment can be enforced by enabling
3130 * ECRC generation (if supported).
3131 *
3132 * When PCI-E Completion packets are not aligned, it is actually more
3133 * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
3134 *
3135 * If the driver can neither enable ECRC nor verify that it has
3136 * already been enabled, then it must use a firmware image which works
3137 * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
3138 * should also ensure that it never gives the device a Read-DMA which is
3139 * larger than 2KB by setting the tx_boundary to 2KB.  If ECRC is
3140 * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
3141 * firmware image, and set tx_boundary to 4KB.
3142 */
3143
3144static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
3145{
3146        struct pci_dev *pdev = mgp->pdev;
3147        struct device *dev = &pdev->dev;
3148        int status;
3149
3150        mgp->tx_boundary = 4096;
3151        /*
3152         * Verify the max read request size was set to 4KB
3153         * before trying the test with 4KB.
3154         */
3155        status = pcie_get_readrq(pdev);
3156        if (status < 0) {
3157                dev_err(dev, "Couldn't read max read req size: %d\n", status);
3158                goto abort;
3159        }
3160        if (status != 4096) {
3161                dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
3162                mgp->tx_boundary = 2048;
3163        }
3164        /*
3165         * load the optimized firmware (which assumes aligned PCIe
3166         * completions) in order to see if it works on this host.
3167         */
3168        set_fw_name(mgp, myri10ge_fw_aligned, false);
3169        status = myri10ge_load_firmware(mgp, 1);
3170        if (status != 0) {
3171                goto abort;
3172        }
3173
3174        /*
3175         * Enable ECRC if possible
3176         */
3177        myri10ge_enable_ecrc(mgp);
3178
3179        /*
3180         * Run a DMA test which watches for unaligned completions and
3181         * aborts on the first one seen.
3182         */
3183
3184        status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
3185        if (status == 0)
3186                return;         /* keep the aligned firmware */
3187
3188        if (status != -E2BIG)
3189                dev_warn(dev, "DMA test failed: %d\n", status);
3190        if (status == -ENOSYS)
3191                dev_warn(dev, "Falling back to ethp! "
3192                         "Please install up to date fw\n");
3193abort:
3194        /* fall back to using the unaligned firmware */
3195        mgp->tx_boundary = 2048;
3196        set_fw_name(mgp, myri10ge_fw_unaligned, false);
3197}
3198
3199static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
3200{
3201        int overridden = 0;
3202
3203        if (myri10ge_force_firmware == 0) {
3204                int link_width;
3205                u16 lnk;
3206
3207                pcie_capability_read_word(mgp->pdev, PCI_EXP_LNKSTA, &lnk);
3208                link_width = (lnk >> 4) & 0x3f;
3209
3210                /* Check to see if Link is less than 8 or if the
3211                 * upstream bridge is known to provide aligned
3212                 * completions */
3213                if (link_width < 8) {
3214                        dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
3215                                 link_width);
3216                        mgp->tx_boundary = 4096;
3217                        set_fw_name(mgp, myri10ge_fw_aligned, false);
3218                } else {
3219                        myri10ge_firmware_probe(mgp);
3220                }
3221        } else {
3222                if (myri10ge_force_firmware == 1) {
3223                        dev_info(&mgp->pdev->dev,
3224                                 "Assuming aligned completions (forced)\n");
3225                        mgp->tx_boundary = 4096;
3226                        set_fw_name(mgp, myri10ge_fw_aligned, false);
3227                } else {
3228                        dev_info(&mgp->pdev->dev,
3229                                 "Assuming unaligned completions (forced)\n");
3230                        mgp->tx_boundary = 2048;
3231                        set_fw_name(mgp, myri10ge_fw_unaligned, false);
3232                }
3233        }
3234
3235        kernel_param_lock(THIS_MODULE);
3236        if (myri10ge_fw_name != NULL) {
3237                char *fw_name = kstrdup(myri10ge_fw_name, GFP_KERNEL);
3238                if (fw_name) {
3239                        overridden = 1;
3240                        set_fw_name(mgp, fw_name, true);
3241                }
3242        }
3243        kernel_param_unlock(THIS_MODULE);
3244
3245        if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
3246            myri10ge_fw_names[mgp->board_number] != NULL &&
3247            strlen(myri10ge_fw_names[mgp->board_number])) {
3248                set_fw_name(mgp, myri10ge_fw_names[mgp->board_number], false);
3249                overridden = 1;
3250        }
3251        if (overridden)
3252                dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
3253                         mgp->fw_name);
3254}
3255
3256static void myri10ge_mask_surprise_down(struct pci_dev *pdev)
3257{
3258        struct pci_dev *bridge = pdev->bus->self;
3259        int cap;
3260        u32 mask;
3261
3262        if (bridge == NULL)
3263                return;
3264
3265        cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3266        if (cap) {
3267                /* a sram parity error can cause a surprise link
3268                 * down; since we expect and can recover from sram
3269                 * parity errors, mask surprise link down events */
3270                pci_read_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, &mask);
3271                mask |= 0x20;
3272                pci_write_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, mask);
3273        }
3274}
3275
3276#ifdef CONFIG_PM
3277static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
3278{
3279        struct myri10ge_priv *mgp;
3280        struct net_device *netdev;
3281
3282        mgp = pci_get_drvdata(pdev);
3283        if (mgp == NULL)
3284                return -EINVAL;
3285        netdev = mgp->dev;
3286
3287        netif_device_detach(netdev);
3288        if (netif_running(netdev)) {
3289                netdev_info(netdev, "closing\n");
3290                rtnl_lock();
3291                myri10ge_close(netdev);
3292                rtnl_unlock();
3293        }
3294        myri10ge_dummy_rdma(mgp, 0);
3295        pci_save_state(pdev);
3296        pci_disable_device(pdev);
3297
3298        return pci_set_power_state(pdev, pci_choose_state(pdev, state));
3299}
3300
3301static int myri10ge_resume(struct pci_dev *pdev)
3302{
3303        struct myri10ge_priv *mgp;
3304        struct net_device *netdev;
3305        int status;
3306        u16 vendor;
3307
3308        mgp = pci_get_drvdata(pdev);
3309        if (mgp == NULL)
3310                return -EINVAL;
3311        netdev = mgp->dev;
3312        pci_set_power_state(pdev, PCI_D0);      /* zeros conf space as a side effect */
3313        msleep(5);              /* give card time to respond */
3314        pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3315        if (vendor == 0xffff) {
3316                netdev_err(mgp->dev, "device disappeared!\n");
3317                return -EIO;
3318        }
3319
3320        pci_restore_state(pdev);
3321
3322        status = pci_enable_device(pdev);
3323        if (status) {
3324                dev_err(&pdev->dev, "failed to enable device\n");
3325                return status;
3326        }
3327
3328        pci_set_master(pdev);
3329
3330        myri10ge_reset(mgp);
3331        myri10ge_dummy_rdma(mgp, 1);
3332
3333        /* Save configuration space to be restored if the
3334         * nic resets due to a parity error */
3335        pci_save_state(pdev);
3336
3337        if (netif_running(netdev)) {
3338                rtnl_lock();
3339                status = myri10ge_open(netdev);
3340                rtnl_unlock();
3341                if (status != 0)
3342                        goto abort_with_enabled;
3343
3344        }
3345        netif_device_attach(netdev);
3346
3347        return 0;
3348
3349abort_with_enabled:
3350        pci_disable_device(pdev);
3351        return -EIO;
3352
3353}
3354#endif                          /* CONFIG_PM */
3355
3356static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
3357{
3358        struct pci_dev *pdev = mgp->pdev;
3359        int vs = mgp->vendor_specific_offset;
3360        u32 reboot;
3361
3362        /*enter read32 mode */
3363        pci_write_config_byte(pdev, vs + 0x10, 0x3);
3364
3365        /*read REBOOT_STATUS (0xfffffff0) */
3366        pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
3367        pci_read_config_dword(pdev, vs + 0x14, &reboot);
3368        return reboot;
3369}
3370
3371static void
3372myri10ge_check_slice(struct myri10ge_slice_state *ss, int *reset_needed,
3373                     int *busy_slice_cnt, u32 rx_pause_cnt)
3374{
3375        struct myri10ge_priv *mgp = ss->mgp;
3376        int slice = ss - mgp->ss;
3377
3378        if (ss->tx.req != ss->tx.done &&
3379            ss->tx.done == ss->watchdog_tx_done &&
3380            ss->watchdog_tx_req != ss->watchdog_tx_done) {
3381                /* nic seems like it might be stuck.. */
3382                if (rx_pause_cnt != mgp->watchdog_pause) {
3383                        if (net_ratelimit())
3384                                netdev_warn(mgp->dev, "slice %d: TX paused, "
3385                                            "check link partner\n", slice);
3386                } else {
3387                        netdev_warn(mgp->dev,
3388                                    "slice %d: TX stuck %d %d %d %d %d %d\n",
3389                                    slice, ss->tx.queue_active, ss->tx.req,
3390                                    ss->tx.done, ss->tx.pkt_start,
3391                                    ss->tx.pkt_done,
3392                                    (int)ntohl(mgp->ss[slice].fw_stats->
3393                                               send_done_count));
3394                        *reset_needed = 1;
3395                        ss->stuck = 1;
3396                }
3397        }
3398        if (ss->watchdog_tx_done != ss->tx.done ||
3399            ss->watchdog_rx_done != ss->rx_done.cnt) {
3400                *busy_slice_cnt += 1;
3401        }
3402        ss->watchdog_tx_done = ss->tx.done;
3403        ss->watchdog_tx_req = ss->tx.req;
3404        ss->watchdog_rx_done = ss->rx_done.cnt;
3405}
3406
3407/*
3408 * This watchdog is used to check whether the board has suffered
3409 * from a parity error and needs to be recovered.
3410 */
3411static void myri10ge_watchdog(struct work_struct *work)
3412{
3413        struct myri10ge_priv *mgp =
3414            container_of(work, struct myri10ge_priv, watchdog_work);
3415        struct myri10ge_slice_state *ss;
3416        u32 reboot, rx_pause_cnt;
3417        int status, rebooted;
3418        int i;
3419        int reset_needed = 0;
3420        int busy_slice_cnt = 0;
3421        u16 cmd, vendor;
3422
3423        mgp->watchdog_resets++;
3424        pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3425        rebooted = 0;
3426        if ((cmd & PCI_COMMAND_MASTER) == 0) {
3427                /* Bus master DMA disabled?  Check to see
3428                 * if the card rebooted due to a parity error
3429                 * For now, just report it */
3430                reboot = myri10ge_read_reboot(mgp);
3431                netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
3432                           reboot, myri10ge_reset_recover ? "" : " not");
3433                if (myri10ge_reset_recover == 0)
3434                        return;
3435                rtnl_lock();
3436                mgp->rebooted = 1;
3437                rebooted = 1;
3438                myri10ge_close(mgp->dev);
3439                myri10ge_reset_recover--;
3440                mgp->rebooted = 0;
3441                /*
3442                 * A rebooted nic will come back with config space as
3443                 * it was after power was applied to PCIe bus.
3444                 * Attempt to restore config space which was saved
3445                 * when the driver was loaded, or the last time the
3446                 * nic was resumed from power saving mode.
3447                 */
3448                pci_restore_state(mgp->pdev);
3449
3450                /* save state again for accounting reasons */
3451                pci_save_state(mgp->pdev);
3452
3453        } else {
3454                /* if we get back -1's from our slot, perhaps somebody
3455                 * powered off our card.  Don't try to reset it in
3456                 * this case */
3457                if (cmd == 0xffff) {
3458                        pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3459                        if (vendor == 0xffff) {
3460                                netdev_err(mgp->dev, "device disappeared!\n");
3461                                return;
3462                        }
3463                }
3464                /* Perhaps it is a software error. See if stuck slice
3465                 * has recovered, reset if not */
3466                rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3467                for (i = 0; i < mgp->num_slices; i++) {
3468                        ss = mgp->ss;
3469                        if (ss->stuck) {
3470                                myri10ge_check_slice(ss, &reset_needed,
3471                                                     &busy_slice_cnt,
3472                                                     rx_pause_cnt);
3473                                ss->stuck = 0;
3474                        }
3475                }
3476                if (!reset_needed) {
3477                        netdev_dbg(mgp->dev, "not resetting\n");
3478                        return;
3479                }
3480
3481                netdev_err(mgp->dev, "device timeout, resetting\n");
3482        }
3483
3484        if (!rebooted) {
3485                rtnl_lock();
3486                myri10ge_close(mgp->dev);
3487        }
3488        status = myri10ge_load_firmware(mgp, 1);
3489        if (status != 0)
3490                netdev_err(mgp->dev, "failed to load firmware\n");
3491        else
3492                myri10ge_open(mgp->dev);
3493        rtnl_unlock();
3494}
3495
3496/*
3497 * We use our own timer routine rather than relying upon
3498 * netdev->tx_timeout because we have a very large hardware transmit
3499 * queue.  Due to the large queue, the netdev->tx_timeout function
3500 * cannot detect a NIC with a parity error in a timely fashion if the
3501 * NIC is lightly loaded.
3502 */
3503static void myri10ge_watchdog_timer(struct timer_list *t)
3504{
3505        struct myri10ge_priv *mgp;
3506        struct myri10ge_slice_state *ss;
3507        int i, reset_needed, busy_slice_cnt;
3508        u32 rx_pause_cnt;
3509        u16 cmd;
3510
3511        mgp = from_timer(mgp, t, watchdog_timer);
3512
3513        rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3514        busy_slice_cnt = 0;
3515        for (i = 0, reset_needed = 0;
3516             i < mgp->num_slices && reset_needed == 0; ++i) {
3517
3518                ss = &mgp->ss[i];
3519                if (ss->rx_small.watchdog_needed) {
3520                        myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
3521                                                mgp->small_bytes + MXGEFW_PAD,
3522                                                1);
3523                        if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
3524                            myri10ge_fill_thresh)
3525                                ss->rx_small.watchdog_needed = 0;
3526                }
3527                if (ss->rx_big.watchdog_needed) {
3528                        myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
3529                                                mgp->big_bytes, 1);
3530                        if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
3531                            myri10ge_fill_thresh)
3532                                ss->rx_big.watchdog_needed = 0;
3533                }
3534                myri10ge_check_slice(ss, &reset_needed, &busy_slice_cnt,
3535                                     rx_pause_cnt);
3536        }
3537        /* if we've sent or received no traffic, poll the NIC to
3538         * ensure it is still there.  Otherwise, we risk not noticing
3539         * an error in a timely fashion */
3540        if (busy_slice_cnt == 0) {
3541                pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3542                if ((cmd & PCI_COMMAND_MASTER) == 0) {
3543                        reset_needed = 1;
3544                }
3545        }
3546        mgp->watchdog_pause = rx_pause_cnt;
3547
3548        if (reset_needed) {
3549                schedule_work(&mgp->watchdog_work);
3550        } else {
3551                /* rearm timer */
3552                mod_timer(&mgp->watchdog_timer,
3553                          jiffies + myri10ge_watchdog_timeout * HZ);
3554        }
3555}
3556
3557static void myri10ge_free_slices(struct myri10ge_priv *mgp)
3558{
3559        struct myri10ge_slice_state *ss;
3560        struct pci_dev *pdev = mgp->pdev;
3561        size_t bytes;
3562        int i;
3563
3564        if (mgp->ss == NULL)
3565                return;
3566
3567        for (i = 0; i < mgp->num_slices; i++) {
3568                ss = &mgp->ss[i];
3569                if (ss->rx_done.entry != NULL) {
3570                        bytes = mgp->max_intr_slots *
3571                            sizeof(*ss->rx_done.entry);
3572                        dma_free_coherent(&pdev->dev, bytes,
3573                                          ss->rx_done.entry, ss->rx_done.bus);
3574                        ss->rx_done.entry = NULL;
3575                }
3576                if (ss->fw_stats != NULL) {
3577                        bytes = sizeof(*ss->fw_stats);
3578                        dma_free_coherent(&pdev->dev, bytes,
3579                                          ss->fw_stats, ss->fw_stats_bus);
3580                        ss->fw_stats = NULL;
3581                }
3582                napi_hash_del(&ss->napi);
3583                netif_napi_del(&ss->napi);
3584        }
3585        /* Wait till napi structs are no longer used, and then free ss. */
3586        synchronize_rcu();
3587        kfree(mgp->ss);
3588        mgp->ss = NULL;
3589}
3590
3591static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
3592{
3593        struct myri10ge_slice_state *ss;
3594        struct pci_dev *pdev = mgp->pdev;
3595        size_t bytes;
3596        int i;
3597
3598        bytes = sizeof(*mgp->ss) * mgp->num_slices;
3599        mgp->ss = kzalloc(bytes, GFP_KERNEL);
3600        if (mgp->ss == NULL) {
3601                return -ENOMEM;
3602        }
3603
3604        for (i = 0; i < mgp->num_slices; i++) {
3605                ss = &mgp->ss[i];
3606                bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
3607                ss->rx_done.entry = dma_zalloc_coherent(&pdev->dev, bytes,
3608                                                        &ss->rx_done.bus,
3609                                                        GFP_KERNEL);
3610                if (ss->rx_done.entry == NULL)
3611                        goto abort;
3612                bytes = sizeof(*ss->fw_stats);
3613                ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
3614                                                  &ss->fw_stats_bus,
3615                                                  GFP_KERNEL);
3616                if (ss->fw_stats == NULL)
3617                        goto abort;
3618                ss->mgp = mgp;
3619                ss->dev = mgp->dev;
3620                netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
3621                               myri10ge_napi_weight);
3622        }
3623        return 0;
3624abort:
3625        myri10ge_free_slices(mgp);
3626        return -ENOMEM;
3627}
3628
3629/*
3630 * This function determines the number of slices supported.
3631 * The number slices is the minimum of the number of CPUS,
3632 * the number of MSI-X irqs supported, the number of slices
3633 * supported by the firmware
3634 */
3635static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
3636{
3637        struct myri10ge_cmd cmd;
3638        struct pci_dev *pdev = mgp->pdev;
3639        char *old_fw;
3640        bool old_allocated;
3641        int i, status, ncpus;
3642
3643        mgp->num_slices = 1;
3644        ncpus = netif_get_num_default_rss_queues();
3645
3646        if (myri10ge_max_slices == 1 || !pdev->msix_cap ||
3647            (myri10ge_max_slices == -1 && ncpus < 2))
3648                return;
3649
3650        /* try to load the slice aware rss firmware */
3651        old_fw = mgp->fw_name;
3652        old_allocated = mgp->fw_name_allocated;
3653        /* don't free old_fw if we override it. */
3654        mgp->fw_name_allocated = false;
3655
3656        if (myri10ge_fw_name != NULL) {
3657                dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
3658                         myri10ge_fw_name);
3659                set_fw_name(mgp, myri10ge_fw_name, false);
3660        } else if (old_fw == myri10ge_fw_aligned)
3661                set_fw_name(mgp, myri10ge_fw_rss_aligned, false);
3662        else
3663                set_fw_name(mgp, myri10ge_fw_rss_unaligned, false);
3664        status = myri10ge_load_firmware(mgp, 0);
3665        if (status != 0) {
3666                dev_info(&pdev->dev, "Rss firmware not found\n");
3667                if (old_allocated)
3668                        kfree(old_fw);
3669                return;
3670        }
3671
3672        /* hit the board with a reset to ensure it is alive */
3673        memset(&cmd, 0, sizeof(cmd));
3674        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
3675        if (status != 0) {
3676                dev_err(&mgp->pdev->dev, "failed reset\n");
3677                goto abort_with_fw;
3678        }
3679
3680        mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
3681
3682        /* tell it the size of the interrupt queues */
3683        cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
3684        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
3685        if (status != 0) {
3686                dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
3687                goto abort_with_fw;
3688        }
3689
3690        /* ask the maximum number of slices it supports */
3691        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
3692        if (status != 0)
3693                goto abort_with_fw;
3694        else
3695                mgp->num_slices = cmd.data0;
3696
3697        /* Only allow multiple slices if MSI-X is usable */
3698        if (!myri10ge_msi) {
3699                goto abort_with_fw;
3700        }
3701
3702        /* if the admin did not specify a limit to how many
3703         * slices we should use, cap it automatically to the
3704         * number of CPUs currently online */
3705        if (myri10ge_max_slices == -1)
3706                myri10ge_max_slices = ncpus;
3707
3708        if (mgp->num_slices > myri10ge_max_slices)
3709                mgp->num_slices = myri10ge_max_slices;
3710
3711        /* Now try to allocate as many MSI-X vectors as we have
3712         * slices. We give up on MSI-X if we can only get a single
3713         * vector. */
3714
3715        mgp->msix_vectors = kcalloc(mgp->num_slices, sizeof(*mgp->msix_vectors),
3716                                    GFP_KERNEL);
3717        if (mgp->msix_vectors == NULL)
3718                goto no_msix;
3719        for (i = 0; i < mgp->num_slices; i++) {
3720                mgp->msix_vectors[i].entry = i;
3721        }
3722
3723        while (mgp->num_slices > 1) {
3724                mgp->num_slices = rounddown_pow_of_two(mgp->num_slices);
3725                if (mgp->num_slices == 1)
3726                        goto no_msix;
3727                status = pci_enable_msix_range(pdev,
3728                                               mgp->msix_vectors,
3729                                               mgp->num_slices,
3730                                               mgp->num_slices);
3731                if (status < 0)
3732                        goto no_msix;
3733
3734                pci_disable_msix(pdev);
3735
3736                if (status == mgp->num_slices) {
3737                        if (old_allocated)
3738                                kfree(old_fw);
3739                        return;
3740                } else {
3741                        mgp->num_slices = status;
3742                }
3743        }
3744
3745no_msix:
3746        if (mgp->msix_vectors != NULL) {
3747                kfree(mgp->msix_vectors);
3748                mgp->msix_vectors = NULL;
3749        }
3750
3751abort_with_fw:
3752        mgp->num_slices = 1;
3753        set_fw_name(mgp, old_fw, old_allocated);
3754        myri10ge_load_firmware(mgp, 0);
3755}
3756
3757static const struct net_device_ops myri10ge_netdev_ops = {
3758        .ndo_open               = myri10ge_open,
3759        .ndo_stop               = myri10ge_close,
3760        .ndo_start_xmit         = myri10ge_xmit,
3761        .ndo_get_stats64        = myri10ge_get_stats,
3762        .ndo_validate_addr      = eth_validate_addr,
3763        .ndo_change_mtu         = myri10ge_change_mtu,
3764        .ndo_set_rx_mode        = myri10ge_set_multicast_list,
3765        .ndo_set_mac_address    = myri10ge_set_mac_address,
3766};
3767
3768static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3769{
3770        struct net_device *netdev;
3771        struct myri10ge_priv *mgp;
3772        struct device *dev = &pdev->dev;
3773        int i;
3774        int status = -ENXIO;
3775        int dac_enabled;
3776        unsigned hdr_offset, ss_offset;
3777        static int board_number;
3778
3779        netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
3780        if (netdev == NULL)
3781                return -ENOMEM;
3782
3783        SET_NETDEV_DEV(netdev, &pdev->dev);
3784
3785        mgp = netdev_priv(netdev);
3786        mgp->dev = netdev;
3787        mgp->pdev = pdev;
3788        mgp->pause = myri10ge_flow_control;
3789        mgp->intr_coal_delay = myri10ge_intr_coal_delay;
3790        mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
3791        mgp->board_number = board_number;
3792        init_waitqueue_head(&mgp->down_wq);
3793
3794        if (pci_enable_device(pdev)) {
3795                dev_err(&pdev->dev, "pci_enable_device call failed\n");
3796                status = -ENODEV;
3797                goto abort_with_netdev;
3798        }
3799
3800        /* Find the vendor-specific cap so we can check
3801         * the reboot register later on */
3802        mgp->vendor_specific_offset
3803            = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
3804
3805        /* Set our max read request to 4KB */
3806        status = pcie_set_readrq(pdev, 4096);
3807        if (status != 0) {
3808                dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
3809                        status);
3810                goto abort_with_enabled;
3811        }
3812
3813        myri10ge_mask_surprise_down(pdev);
3814        pci_set_master(pdev);
3815        dac_enabled = 1;
3816        status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
3817        if (status != 0) {
3818                dac_enabled = 0;
3819                dev_err(&pdev->dev,
3820                        "64-bit pci address mask was refused, "
3821                        "trying 32-bit\n");
3822                status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3823        }
3824        if (status != 0) {
3825                dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
3826                goto abort_with_enabled;
3827        }
3828        (void)pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
3829        mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
3830                                      &mgp->cmd_bus, GFP_KERNEL);
3831        if (!mgp->cmd) {
3832                status = -ENOMEM;
3833                goto abort_with_enabled;
3834        }
3835
3836        mgp->board_span = pci_resource_len(pdev, 0);
3837        mgp->iomem_base = pci_resource_start(pdev, 0);
3838        mgp->wc_cookie = arch_phys_wc_add(mgp->iomem_base, mgp->board_span);
3839        mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
3840        if (mgp->sram == NULL) {
3841                dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
3842                        mgp->board_span, mgp->iomem_base);
3843                status = -ENXIO;
3844                goto abort_with_mtrr;
3845        }
3846        hdr_offset =
3847            swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET)) & 0xffffc;
3848        ss_offset = hdr_offset + offsetof(struct mcp_gen_header, string_specs);
3849        mgp->sram_size = swab32(readl(mgp->sram + ss_offset));
3850        if (mgp->sram_size > mgp->board_span ||
3851            mgp->sram_size <= MYRI10GE_FW_OFFSET) {
3852                dev_err(&pdev->dev,
3853                        "invalid sram_size %dB or board span %ldB\n",
3854                        mgp->sram_size, mgp->board_span);
3855                goto abort_with_ioremap;
3856        }
3857        memcpy_fromio(mgp->eeprom_strings,
3858                      mgp->sram + mgp->sram_size, MYRI10GE_EEPROM_STRINGS_SIZE);
3859        memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
3860        status = myri10ge_read_mac_addr(mgp);
3861        if (status)
3862                goto abort_with_ioremap;
3863
3864        for (i = 0; i < ETH_ALEN; i++)
3865                netdev->dev_addr[i] = mgp->mac_addr[i];
3866
3867        myri10ge_select_firmware(mgp);
3868
3869        status = myri10ge_load_firmware(mgp, 1);
3870        if (status != 0) {
3871                dev_err(&pdev->dev, "failed to load firmware\n");
3872                goto abort_with_ioremap;
3873        }
3874        myri10ge_probe_slices(mgp);
3875        status = myri10ge_alloc_slices(mgp);
3876        if (status != 0) {
3877                dev_err(&pdev->dev, "failed to alloc slice state\n");
3878                goto abort_with_firmware;
3879        }
3880        netif_set_real_num_tx_queues(netdev, mgp->num_slices);
3881        netif_set_real_num_rx_queues(netdev, mgp->num_slices);
3882        status = myri10ge_reset(mgp);
3883        if (status != 0) {
3884                dev_err(&pdev->dev, "failed reset\n");
3885                goto abort_with_slices;
3886        }
3887#ifdef CONFIG_MYRI10GE_DCA
3888        myri10ge_setup_dca(mgp);
3889#endif
3890        pci_set_drvdata(pdev, mgp);
3891
3892        /* MTU range: 68 - 9000 */
3893        netdev->min_mtu = ETH_MIN_MTU;
3894        netdev->max_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
3895
3896        if (myri10ge_initial_mtu > netdev->max_mtu)
3897                myri10ge_initial_mtu = netdev->max_mtu;
3898        if (myri10ge_initial_mtu < netdev->min_mtu)
3899                myri10ge_initial_mtu = netdev->min_mtu;
3900
3901        netdev->mtu = myri10ge_initial_mtu;
3902
3903        netdev->netdev_ops = &myri10ge_netdev_ops;
3904        netdev->hw_features = mgp->features | NETIF_F_RXCSUM;
3905
3906        /* fake NETIF_F_HW_VLAN_CTAG_RX for good GRO performance */
3907        netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX;
3908
3909        netdev->features = netdev->hw_features;
3910
3911        if (dac_enabled)
3912                netdev->features |= NETIF_F_HIGHDMA;
3913
3914        netdev->vlan_features |= mgp->features;
3915        if (mgp->fw_ver_tiny < 37)
3916                netdev->vlan_features &= ~NETIF_F_TSO6;
3917        if (mgp->fw_ver_tiny < 32)
3918                netdev->vlan_features &= ~NETIF_F_TSO;
3919
3920        /* make sure we can get an irq, and that MSI can be
3921         * setup (if available). */
3922        status = myri10ge_request_irq(mgp);
3923        if (status != 0)
3924                goto abort_with_firmware;
3925        myri10ge_free_irq(mgp);
3926
3927        /* Save configuration space to be restored if the
3928         * nic resets due to a parity error */
3929        pci_save_state(pdev);
3930
3931        /* Setup the watchdog timer */
3932        timer_setup(&mgp->watchdog_timer, myri10ge_watchdog_timer, 0);
3933
3934        netdev->ethtool_ops = &myri10ge_ethtool_ops;
3935        INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
3936        status = register_netdev(netdev);
3937        if (status != 0) {
3938                dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
3939                goto abort_with_state;
3940        }
3941        if (mgp->msix_enabled)
3942                dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
3943                         mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
3944                         (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
3945        else
3946                dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
3947                         mgp->msi_enabled ? "MSI" : "xPIC",
3948                         pdev->irq, mgp->tx_boundary, mgp->fw_name,
3949                         (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
3950
3951        board_number++;
3952        return 0;
3953
3954abort_with_state:
3955        pci_restore_state(pdev);
3956
3957abort_with_slices:
3958        myri10ge_free_slices(mgp);
3959
3960abort_with_firmware:
3961        myri10ge_dummy_rdma(mgp, 0);
3962
3963abort_with_ioremap:
3964        if (mgp->mac_addr_string != NULL)
3965                dev_err(&pdev->dev,
3966                        "myri10ge_probe() failed: MAC=%s, SN=%ld\n",
3967                        mgp->mac_addr_string, mgp->serial_number);
3968        iounmap(mgp->sram);
3969
3970abort_with_mtrr:
3971        arch_phys_wc_del(mgp->wc_cookie);
3972        dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
3973                          mgp->cmd, mgp->cmd_bus);
3974
3975abort_with_enabled:
3976        pci_disable_device(pdev);
3977
3978abort_with_netdev:
3979        set_fw_name(mgp, NULL, false);
3980        free_netdev(netdev);
3981        return status;
3982}
3983
3984/*
3985 * myri10ge_remove
3986 *
3987 * Does what is necessary to shutdown one Myrinet device. Called
3988 *   once for each Myrinet card by the kernel when a module is
3989 *   unloaded.
3990 */
3991static void myri10ge_remove(struct pci_dev *pdev)
3992{
3993        struct myri10ge_priv *mgp;
3994        struct net_device *netdev;
3995
3996        mgp = pci_get_drvdata(pdev);
3997        if (mgp == NULL)
3998                return;
3999
4000        cancel_work_sync(&mgp->watchdog_work);
4001        netdev = mgp->dev;
4002        unregister_netdev(netdev);
4003
4004#ifdef CONFIG_MYRI10GE_DCA
4005        myri10ge_teardown_dca(mgp);
4006#endif
4007        myri10ge_dummy_rdma(mgp, 0);
4008
4009        /* avoid a memory leak */
4010        pci_restore_state(pdev);
4011
4012        iounmap(mgp->sram);
4013        arch_phys_wc_del(mgp->wc_cookie);
4014        myri10ge_free_slices(mgp);
4015        kfree(mgp->msix_vectors);
4016        dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
4017                          mgp->cmd, mgp->cmd_bus);
4018
4019        set_fw_name(mgp, NULL, false);
4020        free_netdev(netdev);
4021        pci_disable_device(pdev);
4022}
4023
4024#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E      0x0008
4025#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9    0x0009
4026
4027static const struct pci_device_id myri10ge_pci_tbl[] = {
4028        {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
4029        {PCI_DEVICE
4030         (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
4031        {0},
4032};
4033
4034MODULE_DEVICE_TABLE(pci, myri10ge_pci_tbl);
4035
4036static struct pci_driver myri10ge_driver = {
4037        .name = "myri10ge",
4038        .probe = myri10ge_probe,
4039        .remove = myri10ge_remove,
4040        .id_table = myri10ge_pci_tbl,
4041#ifdef CONFIG_PM
4042        .suspend = myri10ge_suspend,
4043        .resume = myri10ge_resume,
4044#endif
4045};
4046
4047#ifdef CONFIG_MYRI10GE_DCA
4048static int
4049myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
4050{
4051        int err = driver_for_each_device(&myri10ge_driver.driver,
4052                                         NULL, &event,
4053                                         myri10ge_notify_dca_device);
4054
4055        if (err)
4056                return NOTIFY_BAD;
4057        return NOTIFY_DONE;
4058}
4059
4060static struct notifier_block myri10ge_dca_notifier = {
4061        .notifier_call = myri10ge_notify_dca,
4062        .next = NULL,
4063        .priority = 0,
4064};
4065#endif                          /* CONFIG_MYRI10GE_DCA */
4066
4067static __init int myri10ge_init_module(void)
4068{
4069        pr_info("Version %s\n", MYRI10GE_VERSION_STR);
4070
4071        if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
4072                pr_err("Illegal rssh hash type %d, defaulting to source port\n",
4073                       myri10ge_rss_hash);
4074                myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
4075        }
4076#ifdef CONFIG_MYRI10GE_DCA
4077        dca_register_notify(&myri10ge_dca_notifier);
4078#endif
4079        if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
4080                myri10ge_max_slices = MYRI10GE_MAX_SLICES;
4081
4082        return pci_register_driver(&myri10ge_driver);
4083}
4084
4085module_init(myri10ge_init_module);
4086
4087static __exit void myri10ge_cleanup_module(void)
4088{
4089#ifdef CONFIG_MYRI10GE_DCA
4090        dca_unregister_notify(&myri10ge_dca_notifier);
4091#endif
4092        pci_unregister_driver(&myri10ge_driver);
4093}
4094
4095module_exit(myri10ge_cleanup_module);
4096