linux/drivers/net/wireless/atmel/at76c50x-usb.c
<<
>>
Prefs
   1/*
   2 * at76c503/at76c505 USB driver
   3 *
   4 * Copyright (c) 2002 - 2003 Oliver Kurth
   5 * Copyright (c) 2004 Joerg Albert <joerg.albert@gmx.de>
   6 * Copyright (c) 2004 Nick Jones
   7 * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com>
   8 * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org>
   9 * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi>
  10 * Copyright (c) 2010 Sebastian Smolorz <sesmo@gmx.net>
  11 *
  12 * This program is free software; you can redistribute it and/or
  13 * modify it under the terms of the GNU General Public License as
  14 * published by the Free Software Foundation; either version 2 of
  15 * the License, or (at your option) any later version.
  16 *
  17 * This file is part of the Berlios driver for WLAN USB devices based on the
  18 * Atmel AT76C503A/505/505A.
  19 *
  20 * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
  21 *
  22 * TODO list is at the wiki:
  23 *
  24 * http://wireless.kernel.org/en/users/Drivers/at76c50x-usb#TODO
  25 *
  26 */
  27
  28#include <linux/init.h>
  29#include <linux/kernel.h>
  30#include <linux/sched.h>
  31#include <linux/errno.h>
  32#include <linux/slab.h>
  33#include <linux/module.h>
  34#include <linux/spinlock.h>
  35#include <linux/list.h>
  36#include <linux/usb.h>
  37#include <linux/netdevice.h>
  38#include <linux/if_arp.h>
  39#include <linux/etherdevice.h>
  40#include <linux/ethtool.h>
  41#include <linux/wireless.h>
  42#include <net/iw_handler.h>
  43#include <net/ieee80211_radiotap.h>
  44#include <linux/firmware.h>
  45#include <linux/leds.h>
  46#include <net/mac80211.h>
  47
  48#include "at76c50x-usb.h"
  49
  50/* Version information */
  51#define DRIVER_NAME "at76c50x-usb"
  52#define DRIVER_VERSION  "0.17"
  53#define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver"
  54
  55/* at76_debug bits */
  56#define DBG_PROGRESS            0x00000001      /* authentication/accociation */
  57#define DBG_BSS_TABLE           0x00000002      /* show BSS table after scans */
  58#define DBG_IOCTL               0x00000004      /* ioctl calls / settings */
  59#define DBG_MAC_STATE           0x00000008      /* MAC state transitions */
  60#define DBG_TX_DATA             0x00000010      /* tx header */
  61#define DBG_TX_DATA_CONTENT     0x00000020      /* tx content */
  62#define DBG_TX_MGMT             0x00000040      /* tx management */
  63#define DBG_RX_DATA             0x00000080      /* rx data header */
  64#define DBG_RX_DATA_CONTENT     0x00000100      /* rx data content */
  65#define DBG_RX_MGMT             0x00000200      /* rx mgmt frame headers */
  66#define DBG_RX_BEACON           0x00000400      /* rx beacon */
  67#define DBG_RX_CTRL             0x00000800      /* rx control */
  68#define DBG_RX_MGMT_CONTENT     0x00001000      /* rx mgmt content */
  69#define DBG_RX_FRAGS            0x00002000      /* rx data fragment handling */
  70#define DBG_DEVSTART            0x00004000      /* fw download, device start */
  71#define DBG_URB                 0x00008000      /* rx urb status, ... */
  72#define DBG_RX_ATMEL_HDR        0x00010000      /* Atmel-specific Rx headers */
  73#define DBG_PROC_ENTRY          0x00020000      /* procedure entries/exits */
  74#define DBG_PM                  0x00040000      /* power management settings */
  75#define DBG_BSS_MATCH           0x00080000      /* BSS match failures */
  76#define DBG_PARAMS              0x00100000      /* show configured parameters */
  77#define DBG_WAIT_COMPLETE       0x00200000      /* command completion */
  78#define DBG_RX_FRAGS_SKB        0x00400000      /* skb header of Rx fragments */
  79#define DBG_BSS_TABLE_RM        0x00800000      /* purging bss table entries */
  80#define DBG_MONITOR_MODE        0x01000000      /* monitor mode */
  81#define DBG_MIB                 0x02000000      /* dump all MIBs on startup */
  82#define DBG_MGMT_TIMER          0x04000000      /* dump mgmt_timer ops */
  83#define DBG_WE_EVENTS           0x08000000      /* dump wireless events */
  84#define DBG_FW                  0x10000000      /* firmware download */
  85#define DBG_DFU                 0x20000000      /* device firmware upgrade */
  86#define DBG_CMD                 0x40000000
  87#define DBG_MAC80211            0x80000000
  88
  89#define DBG_DEFAULTS            0
  90
  91/* Use our own dbg macro */
  92#define at76_dbg(bits, format, arg...)                                  \
  93do {                                                                    \
  94        if (at76_debug & (bits))                                        \
  95                printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
  96} while (0)
  97
  98#define at76_dbg_dump(bits, buf, len, format, arg...)                   \
  99do {                                                                    \
 100        if (at76_debug & (bits)) {                                      \
 101                printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
 102                print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \
 103        }                                                               \
 104} while (0)
 105
 106static uint at76_debug = DBG_DEFAULTS;
 107
 108/* Protect against concurrent firmware loading and parsing */
 109static struct mutex fw_mutex;
 110
 111static struct fwentry firmwares[] = {
 112        [0] = { "" },
 113        [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" },
 114        [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" },
 115        [BOARD_503] = { "atmel_at76c503-rfmd.bin" },
 116        [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" },
 117        [BOARD_505] = { "atmel_at76c505-rfmd.bin" },
 118        [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" },
 119        [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" },
 120        [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" },
 121};
 122MODULE_FIRMWARE("atmel_at76c503-i3861.bin");
 123MODULE_FIRMWARE("atmel_at76c503-i3863.bin");
 124MODULE_FIRMWARE("atmel_at76c503-rfmd.bin");
 125MODULE_FIRMWARE("atmel_at76c503-rfmd-acc.bin");
 126MODULE_FIRMWARE("atmel_at76c505-rfmd.bin");
 127MODULE_FIRMWARE("atmel_at76c505-rfmd2958.bin");
 128MODULE_FIRMWARE("atmel_at76c505a-rfmd2958.bin");
 129MODULE_FIRMWARE("atmel_at76c505amx-rfmd.bin");
 130
 131#define USB_DEVICE_DATA(__ops)  .driver_info = (kernel_ulong_t)(__ops)
 132
 133static const struct usb_device_id dev_table[] = {
 134        /*
 135         * at76c503-i3861
 136         */
 137        /* Generic AT76C503/3861 device */
 138        { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 139        /* Linksys WUSB11 v2.1/v2.6 */
 140        { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 141        /* Netgear MA101 rev. A */
 142        { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 143        /* Tekram U300C / Allnet ALL0193 */
 144        { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 145        /* HP HN210W J7801A */
 146        { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 147        /* Sitecom/Z-Com/Zyxel M4Y-750 */
 148        { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 149        /* Dynalink/Askey WLL013 (intersil) */
 150        { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 151        /* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */
 152        { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 153        /* BenQ AWL300 */
 154        { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 155        /* Addtron AWU-120, Compex WLU11 */
 156        { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 157        /* Intel AP310 AnyPoint II USB */
 158        { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 159        /* Dynalink L11U */
 160        { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 161        /* Arescom WL-210, FCC id 07J-GL2411USB */
 162        { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 163        /* I-O DATA WN-B11/USB */
 164        { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 165        /* BT Voyager 1010 */
 166        { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 167        /*
 168         * at76c503-i3863
 169         */
 170        /* Generic AT76C503/3863 device */
 171        { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) },
 172        /* Samsung SWL-2100U */
 173        { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) },
 174        /*
 175         * at76c503-rfmd
 176         */
 177        /* Generic AT76C503/RFMD device */
 178        { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) },
 179        /* Dynalink/Askey WLL013 (rfmd) */
 180        { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) },
 181        /* Linksys WUSB11 v2.6 */
 182        { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) },
 183        /* Network Everywhere NWU11B */
 184        { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) },
 185        /* Netgear MA101 rev. B */
 186        { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) },
 187        /* D-Link DWL-120 rev. E */
 188        { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) },
 189        /* Actiontec 802UAT1, HWU01150-01UK */
 190        { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) },
 191        /* AirVast W-Buddie WN210 */
 192        { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) },
 193        /* Dick Smith Electronics XH1153 802.11b USB adapter */
 194        { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) },
 195        /* CNet CNUSB611 */
 196        { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) },
 197        /* FiberLine FL-WL200U */
 198        { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) },
 199        /* BenQ AWL400 USB stick */
 200        { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) },
 201        /* 3Com 3CRSHEW696 */
 202        { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) },
 203        /* Siemens Santis ADSL WLAN USB adapter WLL 013 */
 204        { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) },
 205        /* Belkin F5D6050, version 2 */
 206        { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) },
 207        /* iBlitzz, BWU613 (not *B or *SB) */
 208        { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) },
 209        /* Gigabyte GN-WLBM101 */
 210        { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) },
 211        /* Planex GW-US11S */
 212        { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) },
 213        /* Internal WLAN adapter in h5[4,5]xx series iPAQs */
 214        { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) },
 215        /* Corega Wireless LAN USB-11 mini */
 216        { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) },
 217        /* Corega Wireless LAN USB-11 mini2 */
 218        { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) },
 219        /* Uniden PCW100 */
 220        { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) },
 221        /*
 222         * at76c503-rfmd-acc
 223         */
 224        /* SMC2664W */
 225        { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) },
 226        /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
 227        { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) },
 228        /*
 229         * at76c505-rfmd
 230         */
 231        /* Generic AT76C505/RFMD */
 232        { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) },
 233        /*
 234         * at76c505-rfmd2958
 235         */
 236        /* Generic AT76C505/RFMD, OvisLink WL-1130USB */
 237        { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
 238        /* Fiberline FL-WL240U */
 239        { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) },
 240        /* CNet CNUSB-611G */
 241        { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) },
 242        /* Linksys WUSB11 v2.8 */
 243        { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) },
 244        /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
 245        { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) },
 246        /* Corega WLAN USB Stick 11 */
 247        { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
 248        /* Microstar MSI Box MS6978 */
 249        { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) },
 250        /*
 251         * at76c505a-rfmd2958
 252         */
 253        /* Generic AT76C505A device */
 254        { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) },
 255        /* Generic AT76C505AS device */
 256        { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
 257        /* Siemens Gigaset USB WLAN Adapter 11 */
 258        { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
 259        /* OQO Model 01+ Internal Wi-Fi */
 260        { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) },
 261        /*
 262         * at76c505amx-rfmd
 263         */
 264        /* Generic AT76C505AMX device */
 265        { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) },
 266        { }
 267};
 268
 269MODULE_DEVICE_TABLE(usb, dev_table);
 270
 271/* Supported rates of this hardware, bit 7 marks basic rates */
 272static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };
 273
 274static const char *const preambles[] = { "long", "short", "auto" };
 275
 276/* Firmware download */
 277/* DFU states */
 278#define STATE_IDLE                      0x00
 279#define STATE_DETACH                    0x01
 280#define STATE_DFU_IDLE                  0x02
 281#define STATE_DFU_DOWNLOAD_SYNC         0x03
 282#define STATE_DFU_DOWNLOAD_BUSY         0x04
 283#define STATE_DFU_DOWNLOAD_IDLE         0x05
 284#define STATE_DFU_MANIFEST_SYNC         0x06
 285#define STATE_DFU_MANIFEST              0x07
 286#define STATE_DFU_MANIFEST_WAIT_RESET   0x08
 287#define STATE_DFU_UPLOAD_IDLE           0x09
 288#define STATE_DFU_ERROR                 0x0a
 289
 290/* DFU commands */
 291#define DFU_DETACH                      0
 292#define DFU_DNLOAD                      1
 293#define DFU_UPLOAD                      2
 294#define DFU_GETSTATUS                   3
 295#define DFU_CLRSTATUS                   4
 296#define DFU_GETSTATE                    5
 297#define DFU_ABORT                       6
 298
 299#define FW_BLOCK_SIZE 1024
 300
 301struct dfu_status {
 302        unsigned char status;
 303        unsigned char poll_timeout[3];
 304        unsigned char state;
 305        unsigned char string;
 306} __packed;
 307
 308static inline int at76_is_intersil(enum board_type board)
 309{
 310        return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
 311}
 312
 313static inline int at76_is_503rfmd(enum board_type board)
 314{
 315        return (board == BOARD_503 || board == BOARD_503_ACC);
 316}
 317
 318static inline int at76_is_505a(enum board_type board)
 319{
 320        return (board == BOARD_505A || board == BOARD_505AMX);
 321}
 322
 323/* Load a block of the first (internal) part of the firmware */
 324static int at76_load_int_fw_block(struct usb_device *udev, int blockno,
 325                                  void *block, int size)
 326{
 327        return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD,
 328                               USB_TYPE_CLASS | USB_DIR_OUT |
 329                               USB_RECIP_INTERFACE, blockno, 0, block, size,
 330                               USB_CTRL_GET_TIMEOUT);
 331}
 332
 333static int at76_dfu_get_status(struct usb_device *udev,
 334                               struct dfu_status *status)
 335{
 336        int ret;
 337
 338        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS,
 339                              USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
 340                              0, 0, status, sizeof(struct dfu_status),
 341                              USB_CTRL_GET_TIMEOUT);
 342        return ret;
 343}
 344
 345static int at76_dfu_get_state(struct usb_device *udev, u8 *state)
 346{
 347        int ret;
 348
 349        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE,
 350                              USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
 351                              0, 0, state, 1, USB_CTRL_GET_TIMEOUT);
 352        return ret;
 353}
 354
 355/* Convert timeout from the DFU status to jiffies */
 356static inline unsigned long at76_get_timeout(struct dfu_status *s)
 357{
 358        return msecs_to_jiffies((s->poll_timeout[2] << 16)
 359                                | (s->poll_timeout[1] << 8)
 360                                | (s->poll_timeout[0]));
 361}
 362
 363/* Load internal firmware from the buffer.  If manifest_sync_timeout > 0, use
 364 * its value in jiffies in the MANIFEST_SYNC state.  */
 365static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
 366                                int manifest_sync_timeout)
 367{
 368        int ret = 0;
 369        int need_dfu_state = 1;
 370        int is_done = 0;
 371        u32 dfu_timeout = 0;
 372        int bsize = 0;
 373        int blockno = 0;
 374        struct dfu_status *dfu_stat_buf = NULL;
 375        u8 *dfu_state = NULL;
 376        u8 *block = NULL;
 377
 378        at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size,
 379                 manifest_sync_timeout);
 380
 381        if (!size) {
 382                dev_err(&udev->dev, "FW buffer length invalid!\n");
 383                return -EINVAL;
 384        }
 385
 386        dfu_stat_buf = kmalloc(sizeof(struct dfu_status), GFP_KERNEL);
 387        if (!dfu_stat_buf) {
 388                ret = -ENOMEM;
 389                goto exit;
 390        }
 391
 392        block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
 393        if (!block) {
 394                ret = -ENOMEM;
 395                goto exit;
 396        }
 397
 398        dfu_state = kmalloc(sizeof(u8), GFP_KERNEL);
 399        if (!dfu_state) {
 400                ret = -ENOMEM;
 401                goto exit;
 402        }
 403        *dfu_state = 0;
 404
 405        do {
 406                if (need_dfu_state) {
 407                        ret = at76_dfu_get_state(udev, dfu_state);
 408                        if (ret < 0) {
 409                                dev_err(&udev->dev,
 410                                        "cannot get DFU state: %d\n", ret);
 411                                goto exit;
 412                        }
 413                        need_dfu_state = 0;
 414                }
 415
 416                switch (*dfu_state) {
 417                case STATE_DFU_DOWNLOAD_SYNC:
 418                        at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC");
 419                        ret = at76_dfu_get_status(udev, dfu_stat_buf);
 420                        if (ret >= 0) {
 421                                *dfu_state = dfu_stat_buf->state;
 422                                dfu_timeout = at76_get_timeout(dfu_stat_buf);
 423                                need_dfu_state = 0;
 424                        } else
 425                                dev_err(&udev->dev,
 426                                        "at76_dfu_get_status returned %d\n",
 427                                        ret);
 428                        break;
 429
 430                case STATE_DFU_DOWNLOAD_BUSY:
 431                        at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY");
 432                        need_dfu_state = 1;
 433
 434                        at76_dbg(DBG_DFU, "DFU: Resetting device");
 435                        schedule_timeout_interruptible(dfu_timeout);
 436                        break;
 437
 438                case STATE_DFU_DOWNLOAD_IDLE:
 439                        at76_dbg(DBG_DFU, "DOWNLOAD...");
 440                        /* fall through */
 441                case STATE_DFU_IDLE:
 442                        at76_dbg(DBG_DFU, "DFU IDLE");
 443
 444                        bsize = min_t(int, size, FW_BLOCK_SIZE);
 445                        memcpy(block, buf, bsize);
 446                        at76_dbg(DBG_DFU, "int fw, size left = %5d, "
 447                                 "bsize = %4d, blockno = %2d", size, bsize,
 448                                 blockno);
 449                        ret =
 450                            at76_load_int_fw_block(udev, blockno, block, bsize);
 451                        buf += bsize;
 452                        size -= bsize;
 453                        blockno++;
 454
 455                        if (ret != bsize)
 456                                dev_err(&udev->dev,
 457                                        "at76_load_int_fw_block returned %d\n",
 458                                        ret);
 459                        need_dfu_state = 1;
 460                        break;
 461
 462                case STATE_DFU_MANIFEST_SYNC:
 463                        at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC");
 464
 465                        ret = at76_dfu_get_status(udev, dfu_stat_buf);
 466                        if (ret < 0)
 467                                break;
 468
 469                        *dfu_state = dfu_stat_buf->state;
 470                        dfu_timeout = at76_get_timeout(dfu_stat_buf);
 471                        need_dfu_state = 0;
 472
 473                        /* override the timeout from the status response,
 474                           needed for AT76C505A */
 475                        if (manifest_sync_timeout > 0)
 476                                dfu_timeout = manifest_sync_timeout;
 477
 478                        at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase");
 479                        schedule_timeout_interruptible(dfu_timeout);
 480                        break;
 481
 482                case STATE_DFU_MANIFEST:
 483                        at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST");
 484                        is_done = 1;
 485                        break;
 486
 487                case STATE_DFU_MANIFEST_WAIT_RESET:
 488                        at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET");
 489                        is_done = 1;
 490                        break;
 491
 492                case STATE_DFU_UPLOAD_IDLE:
 493                        at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE");
 494                        break;
 495
 496                case STATE_DFU_ERROR:
 497                        at76_dbg(DBG_DFU, "STATE_DFU_ERROR");
 498                        ret = -EPIPE;
 499                        break;
 500
 501                default:
 502                        at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", *dfu_state);
 503                        ret = -EINVAL;
 504                        break;
 505                }
 506        } while (!is_done && (ret >= 0));
 507
 508exit:
 509        kfree(dfu_state);
 510        kfree(block);
 511        kfree(dfu_stat_buf);
 512
 513        if (ret >= 0)
 514                ret = 0;
 515
 516        return ret;
 517}
 518
 519/* LED trigger */
 520static int tx_activity;
 521static void at76_ledtrig_tx_timerfunc(struct timer_list *unused);
 522static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc);
 523DEFINE_LED_TRIGGER(ledtrig_tx);
 524
 525static void at76_ledtrig_tx_timerfunc(struct timer_list *unused)
 526{
 527        static int tx_lastactivity;
 528
 529        if (tx_lastactivity != tx_activity) {
 530                tx_lastactivity = tx_activity;
 531                led_trigger_event(ledtrig_tx, LED_FULL);
 532                mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
 533        } else
 534                led_trigger_event(ledtrig_tx, LED_OFF);
 535}
 536
 537static void at76_ledtrig_tx_activity(void)
 538{
 539        tx_activity++;
 540        if (!timer_pending(&ledtrig_tx_timer))
 541                mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
 542}
 543
 544static int at76_remap(struct usb_device *udev)
 545{
 546        int ret;
 547        ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a,
 548                              USB_TYPE_VENDOR | USB_DIR_OUT |
 549                              USB_RECIP_INTERFACE, 0, 0, NULL, 0,
 550                              USB_CTRL_GET_TIMEOUT);
 551        if (ret < 0)
 552                return ret;
 553        return 0;
 554}
 555
 556static int at76_get_op_mode(struct usb_device *udev)
 557{
 558        int ret;
 559        u8 saved;
 560        u8 *op_mode;
 561
 562        op_mode = kmalloc(1, GFP_NOIO);
 563        if (!op_mode)
 564                return -ENOMEM;
 565        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 566                              USB_TYPE_VENDOR | USB_DIR_IN |
 567                              USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
 568                              USB_CTRL_GET_TIMEOUT);
 569        saved = *op_mode;
 570        kfree(op_mode);
 571
 572        if (ret < 0)
 573                return ret;
 574        else if (ret < 1)
 575                return -EIO;
 576        else
 577                return saved;
 578}
 579
 580/* Load a block of the second ("external") part of the firmware */
 581static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno,
 582                                         void *block, int size)
 583{
 584        return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
 585                               USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
 586                               0x0802, blockno, block, size,
 587                               USB_CTRL_GET_TIMEOUT);
 588}
 589
 590static inline int at76_get_hw_cfg(struct usb_device *udev,
 591                                  union at76_hwcfg *buf, int buf_size)
 592{
 593        return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 594                               USB_TYPE_VENDOR | USB_DIR_IN |
 595                               USB_RECIP_INTERFACE, 0x0a02, 0,
 596                               buf, buf_size, USB_CTRL_GET_TIMEOUT);
 597}
 598
 599/* Intersil boards use a different "value" for GetHWConfig requests */
 600static inline int at76_get_hw_cfg_intersil(struct usb_device *udev,
 601                                           union at76_hwcfg *buf, int buf_size)
 602{
 603        return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 604                               USB_TYPE_VENDOR | USB_DIR_IN |
 605                               USB_RECIP_INTERFACE, 0x0902, 0,
 606                               buf, buf_size, USB_CTRL_GET_TIMEOUT);
 607}
 608
 609/* Get the hardware configuration for the adapter and put it to the appropriate
 610 * fields of 'priv' (the GetHWConfig request and interpretation of the result
 611 * depends on the board type) */
 612static int at76_get_hw_config(struct at76_priv *priv)
 613{
 614        int ret;
 615        union at76_hwcfg *hwcfg = kmalloc(sizeof(*hwcfg), GFP_KERNEL);
 616
 617        if (!hwcfg)
 618                return -ENOMEM;
 619
 620        if (at76_is_intersil(priv->board_type)) {
 621                ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg,
 622                                               sizeof(hwcfg->i));
 623                if (ret < 0)
 624                        goto exit;
 625                memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN);
 626                priv->regulatory_domain = hwcfg->i.regulatory_domain;
 627        } else if (at76_is_503rfmd(priv->board_type)) {
 628                ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3));
 629                if (ret < 0)
 630                        goto exit;
 631                memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN);
 632                priv->regulatory_domain = hwcfg->r3.regulatory_domain;
 633        } else {
 634                ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5));
 635                if (ret < 0)
 636                        goto exit;
 637                memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN);
 638                priv->regulatory_domain = hwcfg->r5.regulatory_domain;
 639        }
 640
 641exit:
 642        kfree(hwcfg);
 643        if (ret < 0)
 644                wiphy_err(priv->hw->wiphy, "cannot get HW Config (error %d)\n",
 645                          ret);
 646
 647        return ret;
 648}
 649
 650static struct reg_domain const *at76_get_reg_domain(u16 code)
 651{
 652        int i;
 653        static struct reg_domain const fd_tab[] = {
 654                { 0x10, "FCC (USA)", 0x7ff },   /* ch 1-11 */
 655                { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */
 656                { 0x30, "ETSI (most of Europe)", 0x1fff },      /* ch 1-13 */
 657                { 0x31, "Spain", 0x600 },       /* ch 10-11 */
 658                { 0x32, "France", 0x1e00 },     /* ch 10-13 */
 659                { 0x40, "MKK (Japan)", 0x2000 },        /* ch 14 */
 660                { 0x41, "MKK1 (Japan)", 0x3fff },       /* ch 1-14 */
 661                { 0x50, "Israel", 0x3fc },      /* ch 3-9 */
 662                { 0x00, "<unknown>", 0xffffffff }       /* ch 1-32 */
 663        };
 664
 665        /* Last entry is fallback for unknown domain code */
 666        for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++)
 667                if (code == fd_tab[i].code)
 668                        break;
 669
 670        return &fd_tab[i];
 671}
 672
 673static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
 674                               int buf_size)
 675{
 676        int ret;
 677
 678        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 679                              USB_TYPE_VENDOR | USB_DIR_IN |
 680                              USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size,
 681                              USB_CTRL_GET_TIMEOUT);
 682        if (ret >= 0 && ret != buf_size)
 683                return -EIO;
 684        return ret;
 685}
 686
 687/* Return positive number for status, negative for an error */
 688static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
 689{
 690        u8 *stat_buf;
 691        int ret;
 692
 693        stat_buf = kmalloc(40, GFP_NOIO);
 694        if (!stat_buf)
 695                return -ENOMEM;
 696
 697        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
 698                        USB_TYPE_VENDOR | USB_DIR_IN |
 699                        USB_RECIP_INTERFACE, cmd, 0, stat_buf,
 700                        40, USB_CTRL_GET_TIMEOUT);
 701        if (ret >= 0)
 702                ret = stat_buf[5];
 703        kfree(stat_buf);
 704
 705        return ret;
 706}
 707
 708#define MAKE_CMD_CASE(c) case (c): return #c
 709static const char *at76_get_cmd_string(u8 cmd_status)
 710{
 711        switch (cmd_status) {
 712                MAKE_CMD_CASE(CMD_SET_MIB);
 713                MAKE_CMD_CASE(CMD_GET_MIB);
 714                MAKE_CMD_CASE(CMD_SCAN);
 715                MAKE_CMD_CASE(CMD_JOIN);
 716                MAKE_CMD_CASE(CMD_START_IBSS);
 717                MAKE_CMD_CASE(CMD_RADIO_ON);
 718                MAKE_CMD_CASE(CMD_RADIO_OFF);
 719                MAKE_CMD_CASE(CMD_STARTUP);
 720        }
 721
 722        return "UNKNOWN";
 723}
 724
 725static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
 726                                 int buf_size)
 727{
 728        int ret;
 729        struct at76_command *cmd_buf = kmalloc(sizeof(struct at76_command) +
 730                                               buf_size, GFP_KERNEL);
 731
 732        if (!cmd_buf)
 733                return -ENOMEM;
 734
 735        cmd_buf->cmd = cmd;
 736        cmd_buf->reserved = 0;
 737        cmd_buf->size = cpu_to_le16(buf_size);
 738        memcpy(cmd_buf->data, buf, buf_size);
 739
 740        at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size,
 741                      "issuing command %s (0x%02x)",
 742                      at76_get_cmd_string(cmd), cmd);
 743
 744        ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
 745                              USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
 746                              0, 0, cmd_buf,
 747                              sizeof(struct at76_command) + buf_size,
 748                              USB_CTRL_GET_TIMEOUT);
 749        kfree(cmd_buf);
 750        return ret;
 751}
 752
 753#define MAKE_CMD_STATUS_CASE(c) case (c): return #c
 754static const char *at76_get_cmd_status_string(u8 cmd_status)
 755{
 756        switch (cmd_status) {
 757                MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE);
 758                MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE);
 759                MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN);
 760                MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER);
 761                MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED);
 762                MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT);
 763                MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS);
 764                MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE);
 765                MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED);
 766        }
 767
 768        return "UNKNOWN";
 769}
 770
 771/* Wait until the command is completed */
 772static int at76_wait_completion(struct at76_priv *priv, int cmd)
 773{
 774        int status = 0;
 775        unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT;
 776
 777        do {
 778                status = at76_get_cmd_status(priv->udev, cmd);
 779                if (status < 0) {
 780                        wiphy_err(priv->hw->wiphy,
 781                                  "at76_get_cmd_status failed: %d\n",
 782                                  status);
 783                        break;
 784                }
 785
 786                at76_dbg(DBG_WAIT_COMPLETE,
 787                         "%s: Waiting on cmd %d, status = %d (%s)",
 788                         wiphy_name(priv->hw->wiphy), cmd, status,
 789                         at76_get_cmd_status_string(status));
 790
 791                if (status != CMD_STATUS_IN_PROGRESS
 792                    && status != CMD_STATUS_IDLE)
 793                        break;
 794
 795                schedule_timeout_interruptible(HZ / 10);        /* 100 ms */
 796                if (time_after(jiffies, timeout)) {
 797                        wiphy_err(priv->hw->wiphy,
 798                                  "completion timeout for command %d\n", cmd);
 799                        status = -ETIMEDOUT;
 800                        break;
 801                }
 802        } while (1);
 803
 804        return status;
 805}
 806
 807static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
 808{
 809        int ret;
 810
 811        ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf,
 812                                    offsetof(struct set_mib_buffer,
 813                                             data) + buf->size);
 814        if (ret < 0)
 815                return ret;
 816
 817        ret = at76_wait_completion(priv, CMD_SET_MIB);
 818        if (ret != CMD_STATUS_COMPLETE) {
 819                wiphy_info(priv->hw->wiphy,
 820                           "set_mib: at76_wait_completion failed with %d\n",
 821                           ret);
 822                ret = -EIO;
 823        }
 824
 825        return ret;
 826}
 827
 828/* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */
 829static int at76_set_radio(struct at76_priv *priv, int enable)
 830{
 831        int ret;
 832        int cmd;
 833
 834        if (priv->radio_on == enable)
 835                return 0;
 836
 837        cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF;
 838
 839        ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
 840        if (ret < 0)
 841                wiphy_err(priv->hw->wiphy,
 842                          "at76_set_card_command(%d) failed: %d\n", cmd, ret);
 843        else
 844                ret = 1;
 845
 846        priv->radio_on = enable;
 847        return ret;
 848}
 849
 850/* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */
 851static int at76_set_pm_mode(struct at76_priv *priv)
 852{
 853        int ret = 0;
 854
 855        priv->mib_buf.type = MIB_MAC_MGMT;
 856        priv->mib_buf.size = 1;
 857        priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode);
 858        priv->mib_buf.data.byte = priv->pm_mode;
 859
 860        ret = at76_set_mib(priv, &priv->mib_buf);
 861        if (ret < 0)
 862                wiphy_err(priv->hw->wiphy, "set_mib (pm_mode) failed: %d\n",
 863                          ret);
 864
 865        return ret;
 866}
 867
 868static int at76_set_preamble(struct at76_priv *priv, u8 type)
 869{
 870        int ret = 0;
 871
 872        priv->mib_buf.type = MIB_LOCAL;
 873        priv->mib_buf.size = 1;
 874        priv->mib_buf.index = offsetof(struct mib_local, preamble_type);
 875        priv->mib_buf.data.byte = type;
 876
 877        ret = at76_set_mib(priv, &priv->mib_buf);
 878        if (ret < 0)
 879                wiphy_err(priv->hw->wiphy, "set_mib (preamble) failed: %d\n",
 880                          ret);
 881
 882        return ret;
 883}
 884
 885static int at76_set_frag(struct at76_priv *priv, u16 size)
 886{
 887        int ret = 0;
 888
 889        priv->mib_buf.type = MIB_MAC;
 890        priv->mib_buf.size = 2;
 891        priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold);
 892        priv->mib_buf.data.word = cpu_to_le16(size);
 893
 894        ret = at76_set_mib(priv, &priv->mib_buf);
 895        if (ret < 0)
 896                wiphy_err(priv->hw->wiphy,
 897                          "set_mib (frag threshold) failed: %d\n", ret);
 898
 899        return ret;
 900}
 901
 902static int at76_set_rts(struct at76_priv *priv, u16 size)
 903{
 904        int ret = 0;
 905
 906        priv->mib_buf.type = MIB_MAC;
 907        priv->mib_buf.size = 2;
 908        priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold);
 909        priv->mib_buf.data.word = cpu_to_le16(size);
 910
 911        ret = at76_set_mib(priv, &priv->mib_buf);
 912        if (ret < 0)
 913                wiphy_err(priv->hw->wiphy, "set_mib (rts) failed: %d\n", ret);
 914
 915        return ret;
 916}
 917
 918static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff)
 919{
 920        int ret = 0;
 921
 922        priv->mib_buf.type = MIB_LOCAL;
 923        priv->mib_buf.size = 1;
 924        priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback);
 925        priv->mib_buf.data.byte = onoff;
 926
 927        ret = at76_set_mib(priv, &priv->mib_buf);
 928        if (ret < 0)
 929                wiphy_err(priv->hw->wiphy,
 930                          "set_mib (autorate fallback) failed: %d\n", ret);
 931
 932        return ret;
 933}
 934
 935static void at76_dump_mib_mac_addr(struct at76_priv *priv)
 936{
 937        int i;
 938        int ret;
 939        struct mib_mac_addr *m = kmalloc(sizeof(struct mib_mac_addr),
 940                                         GFP_KERNEL);
 941
 942        if (!m)
 943                return;
 944
 945        ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m,
 946                           sizeof(struct mib_mac_addr));
 947        if (ret < 0) {
 948                wiphy_err(priv->hw->wiphy,
 949                          "at76_get_mib (MAC_ADDR) failed: %d\n", ret);
 950                goto exit;
 951        }
 952
 953        at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x",
 954                 wiphy_name(priv->hw->wiphy),
 955                 m->mac_addr, m->res[0], m->res[1]);
 956        for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
 957                at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, "
 958                         "status %d", wiphy_name(priv->hw->wiphy), i,
 959                         m->group_addr[i], m->group_addr_status[i]);
 960exit:
 961        kfree(m);
 962}
 963
 964static void at76_dump_mib_mac_wep(struct at76_priv *priv)
 965{
 966        int i;
 967        int ret;
 968        int key_len;
 969        struct mib_mac_wep *m = kmalloc(sizeof(struct mib_mac_wep), GFP_KERNEL);
 970
 971        if (!m)
 972                return;
 973
 974        ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m,
 975                           sizeof(struct mib_mac_wep));
 976        if (ret < 0) {
 977                wiphy_err(priv->hw->wiphy,
 978                          "at76_get_mib (MAC_WEP) failed: %d\n", ret);
 979                goto exit;
 980        }
 981
 982        at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
 983                 "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
 984                 "encr_level %u key %d", wiphy_name(priv->hw->wiphy),
 985                 m->privacy_invoked, m->wep_default_key_id,
 986                 m->wep_key_mapping_len, m->exclude_unencrypted,
 987                 le32_to_cpu(m->wep_icv_error_count),
 988                 le32_to_cpu(m->wep_excluded_count), m->encryption_level,
 989                 m->wep_default_key_id);
 990
 991        key_len = (m->encryption_level == 1) ?
 992            WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
 993
 994        for (i = 0; i < WEP_KEYS; i++)
 995                at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %*phD",
 996                         wiphy_name(priv->hw->wiphy), i,
 997                         key_len, m->wep_default_keyvalue[i]);
 998exit:
 999        kfree(m);
1000}
1001
1002static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
1003{
1004        int ret;
1005        struct mib_mac_mgmt *m = kmalloc(sizeof(struct mib_mac_mgmt),
1006                                         GFP_KERNEL);
1007
1008        if (!m)
1009                return;
1010
1011        ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m,
1012                           sizeof(struct mib_mac_mgmt));
1013        if (ret < 0) {
1014                wiphy_err(priv->hw->wiphy,
1015                          "at76_get_mib (MAC_MGMT) failed: %d\n", ret);
1016                goto exit;
1017        }
1018
1019        at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration "
1020                 "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d "
1021                 "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d "
1022                 "current_bssid %pM current_essid %*phD current_bss_type %d "
1023                 "pm_mode %d ibss_change %d res %d "
1024                 "multi_domain_capability_implemented %d "
1025                 "international_roaming %d country_string %.3s",
1026                 wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period),
1027                 le16_to_cpu(m->CFP_max_duration),
1028                 le16_to_cpu(m->medium_occupancy_limit),
1029                 le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
1030                 m->CFP_mode, m->privacy_option_implemented, m->DTIM_period,
1031                 m->CFP_period, m->current_bssid,
1032                 IW_ESSID_MAX_SIZE, m->current_essid,
1033                 m->current_bss_type, m->power_mgmt_mode, m->ibss_change,
1034                 m->res, m->multi_domain_capability_implemented,
1035                 m->multi_domain_capability_enabled, m->country_string);
1036exit:
1037        kfree(m);
1038}
1039
1040static void at76_dump_mib_mac(struct at76_priv *priv)
1041{
1042        int ret;
1043        struct mib_mac *m = kmalloc(sizeof(struct mib_mac), GFP_KERNEL);
1044
1045        if (!m)
1046                return;
1047
1048        ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
1049        if (ret < 0) {
1050                wiphy_err(priv->hw->wiphy,
1051                          "at76_get_mib (MAC) failed: %d\n", ret);
1052                goto exit;
1053        }
1054
1055        at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d "
1056                 "max_rx_lifetime %d frag_threshold %d rts_threshold %d "
1057                 "cwmin %d cwmax %d short_retry_time %d long_retry_time %d "
1058                 "scan_type %d scan_channel %d probe_delay %u "
1059                 "min_channel_time %d max_channel_time %d listen_int %d "
1060                 "desired_ssid %*phD desired_bssid %pM desired_bsstype %d",
1061                 wiphy_name(priv->hw->wiphy),
1062                 le32_to_cpu(m->max_tx_msdu_lifetime),
1063                 le32_to_cpu(m->max_rx_lifetime),
1064                 le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
1065                 le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
1066                 m->short_retry_time, m->long_retry_time, m->scan_type,
1067                 m->scan_channel, le16_to_cpu(m->probe_delay),
1068                 le16_to_cpu(m->min_channel_time),
1069                 le16_to_cpu(m->max_channel_time),
1070                 le16_to_cpu(m->listen_interval),
1071                 IW_ESSID_MAX_SIZE, m->desired_ssid,
1072                 m->desired_bssid, m->desired_bsstype);
1073exit:
1074        kfree(m);
1075}
1076
1077static void at76_dump_mib_phy(struct at76_priv *priv)
1078{
1079        int ret;
1080        struct mib_phy *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
1081
1082        if (!m)
1083                return;
1084
1085        ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
1086        if (ret < 0) {
1087                wiphy_err(priv->hw->wiphy,
1088                          "at76_get_mib (PHY) failed: %d\n", ret);
1089                goto exit;
1090        }
1091
1092        at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d "
1093                 "sifs_time %d preamble_length %d plcp_header_length %d "
1094                 "mpdu_max_length %d cca_mode_supported %d operation_rate_set "
1095                 "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
1096                 "phy_type %d current_reg_domain %d",
1097                 wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold),
1098                 le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
1099                 le16_to_cpu(m->preamble_length),
1100                 le16_to_cpu(m->plcp_header_length),
1101                 le16_to_cpu(m->mpdu_max_length),
1102                 le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0],
1103                 m->operation_rate_set[1], m->operation_rate_set[2],
1104                 m->operation_rate_set[3], m->channel_id, m->current_cca_mode,
1105                 m->phy_type, m->current_reg_domain);
1106exit:
1107        kfree(m);
1108}
1109
1110static void at76_dump_mib_local(struct at76_priv *priv)
1111{
1112        int ret;
1113        struct mib_local *m = kmalloc(sizeof(*m), GFP_KERNEL);
1114
1115        if (!m)
1116                return;
1117
1118        ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(*m));
1119        if (ret < 0) {
1120                wiphy_err(priv->hw->wiphy,
1121                          "at76_get_mib (LOCAL) failed: %d\n", ret);
1122                goto exit;
1123        }
1124
1125        at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
1126                 "txautorate_fallback %d ssid_size %d promiscuous_mode %d "
1127                 "preamble_type %d", wiphy_name(priv->hw->wiphy),
1128                 m->beacon_enable,
1129                 m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
1130                 m->preamble_type);
1131exit:
1132        kfree(m);
1133}
1134
1135static void at76_dump_mib_mdomain(struct at76_priv *priv)
1136{
1137        int ret;
1138        struct mib_mdomain *m = kmalloc(sizeof(struct mib_mdomain), GFP_KERNEL);
1139
1140        if (!m)
1141                return;
1142
1143        ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m,
1144                           sizeof(struct mib_mdomain));
1145        if (ret < 0) {
1146                wiphy_err(priv->hw->wiphy,
1147                          "at76_get_mib (MDOMAIN) failed: %d\n", ret);
1148                goto exit;
1149        }
1150
1151        at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %*phD",
1152                 wiphy_name(priv->hw->wiphy),
1153                 (int)sizeof(m->channel_list), m->channel_list);
1154
1155        at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %*phD",
1156                 wiphy_name(priv->hw->wiphy),
1157                 (int)sizeof(m->tx_powerlevel), m->tx_powerlevel);
1158exit:
1159        kfree(m);
1160}
1161
1162/* Enable monitor mode */
1163static int at76_start_monitor(struct at76_priv *priv)
1164{
1165        struct at76_req_scan scan;
1166        int ret;
1167
1168        memset(&scan, 0, sizeof(struct at76_req_scan));
1169        eth_broadcast_addr(scan.bssid);
1170
1171        scan.channel = priv->channel;
1172        scan.scan_type = SCAN_TYPE_PASSIVE;
1173        scan.international_scan = 0;
1174        scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
1175        scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
1176        scan.probe_delay = cpu_to_le16(0);
1177
1178        ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
1179        if (ret >= 0)
1180                ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
1181
1182        return ret;
1183}
1184
1185/* Calculate padding from txbuf->wlength (which excludes the USB TX header),
1186   likely to compensate a flaw in the AT76C503A USB part ... */
1187static inline int at76_calc_padding(int wlen)
1188{
1189        /* add the USB TX header */
1190        wlen += AT76_TX_HDRLEN;
1191
1192        wlen = wlen % 64;
1193
1194        if (wlen < 50)
1195                return 50 - wlen;
1196
1197        if (wlen >= 61)
1198                return 64 + 50 - wlen;
1199
1200        return 0;
1201}
1202
1203static void at76_rx_callback(struct urb *urb)
1204{
1205        struct at76_priv *priv = urb->context;
1206
1207        priv->rx_tasklet.data = (unsigned long)urb;
1208        tasklet_schedule(&priv->rx_tasklet);
1209}
1210
1211static int at76_submit_rx_urb(struct at76_priv *priv)
1212{
1213        int ret;
1214        int size;
1215        struct sk_buff *skb = priv->rx_skb;
1216
1217        if (!priv->rx_urb) {
1218                wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is NULL\n",
1219                          __func__);
1220                return -EFAULT;
1221        }
1222
1223        if (!skb) {
1224                skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
1225                if (!skb) {
1226                        wiphy_err(priv->hw->wiphy,
1227                                  "cannot allocate rx skbuff\n");
1228                        ret = -ENOMEM;
1229                        goto exit;
1230                }
1231                priv->rx_skb = skb;
1232        } else {
1233                skb_push(skb, skb_headroom(skb));
1234                skb_trim(skb, 0);
1235        }
1236
1237        size = skb_tailroom(skb);
1238        usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
1239                          skb_put(skb, size), size, at76_rx_callback, priv);
1240        ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
1241        if (ret < 0) {
1242                if (ret == -ENODEV)
1243                        at76_dbg(DBG_DEVSTART,
1244                                 "usb_submit_urb returned -ENODEV");
1245                else
1246                        wiphy_err(priv->hw->wiphy,
1247                                  "rx, usb_submit_urb failed: %d\n", ret);
1248        }
1249
1250exit:
1251        if (ret < 0 && ret != -ENODEV)
1252                wiphy_err(priv->hw->wiphy,
1253                          "cannot submit rx urb - please unload the driver and/or power cycle the device\n");
1254
1255        return ret;
1256}
1257
1258/* Download external firmware */
1259static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
1260{
1261        int ret;
1262        int op_mode;
1263        int blockno = 0;
1264        int bsize;
1265        u8 *block;
1266        u8 *buf = fwe->extfw;
1267        int size = fwe->extfw_size;
1268
1269        if (!buf || !size)
1270                return -ENOENT;
1271
1272        op_mode = at76_get_op_mode(udev);
1273        at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
1274
1275        if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
1276                dev_err(&udev->dev, "unexpected opmode %d\n", op_mode);
1277                return -EINVAL;
1278        }
1279
1280        block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
1281        if (!block)
1282                return -ENOMEM;
1283
1284        at76_dbg(DBG_DEVSTART, "downloading external firmware");
1285
1286        /* for fw >= 0.100, the device needs an extra empty block */
1287        do {
1288                bsize = min_t(int, size, FW_BLOCK_SIZE);
1289                memcpy(block, buf, bsize);
1290                at76_dbg(DBG_DEVSTART,
1291                         "ext fw, size left = %5d, bsize = %4d, blockno = %2d",
1292                         size, bsize, blockno);
1293                ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
1294                if (ret != bsize) {
1295                        dev_err(&udev->dev,
1296                                "loading %dth firmware block failed: %d\n",
1297                                blockno, ret);
1298                        ret = -EIO;
1299                        goto exit;
1300                }
1301                buf += bsize;
1302                size -= bsize;
1303                blockno++;
1304        } while (bsize > 0);
1305
1306        if (at76_is_505a(fwe->board_type)) {
1307                at76_dbg(DBG_DEVSTART, "200 ms delay for 505a");
1308                schedule_timeout_interruptible(HZ / 5 + 1);
1309        }
1310
1311exit:
1312        kfree(block);
1313        if (ret < 0)
1314                dev_err(&udev->dev,
1315                        "downloading external firmware failed: %d\n", ret);
1316        return ret;
1317}
1318
1319/* Download internal firmware */
1320static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
1321{
1322        int ret;
1323        int need_remap = !at76_is_505a(fwe->board_type);
1324
1325        ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
1326                                   need_remap ? 0 : 2 * HZ);
1327
1328        if (ret < 0) {
1329                dev_err(&udev->dev,
1330                        "downloading internal fw failed with %d\n", ret);
1331                goto exit;
1332        }
1333
1334        at76_dbg(DBG_DEVSTART, "sending REMAP");
1335
1336        /* no REMAP for 505A (see SF driver) */
1337        if (need_remap) {
1338                ret = at76_remap(udev);
1339                if (ret < 0) {
1340                        dev_err(&udev->dev,
1341                                "sending REMAP failed with %d\n", ret);
1342                        goto exit;
1343                }
1344        }
1345
1346        at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
1347        schedule_timeout_interruptible(2 * HZ + 1);
1348        usb_reset_device(udev);
1349
1350exit:
1351        return ret;
1352}
1353
1354static int at76_startup_device(struct at76_priv *priv)
1355{
1356        struct at76_card_config *ccfg = &priv->card_config;
1357        int ret;
1358
1359        at76_dbg(DBG_PARAMS,
1360                 "%s param: ssid %.*s (%*phD) mode %s ch %d wep %s key %d "
1361                 "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size,
1362                 priv->essid, IW_ESSID_MAX_SIZE, priv->essid,
1363                 priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
1364                 priv->channel, priv->wep_enabled ? "enabled" : "disabled",
1365                 priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
1366        at76_dbg(DBG_PARAMS,
1367                 "%s param: preamble %s rts %d retry %d frag %d "
1368                 "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy),
1369                 preambles[priv->preamble_type], priv->rts_threshold,
1370                 priv->short_retry_limit, priv->frag_threshold,
1371                 priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
1372                 TX_RATE_2MBIT ? "2MBit" : priv->txrate ==
1373                 TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate ==
1374                 TX_RATE_11MBIT ? "11MBit" : priv->txrate ==
1375                 TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode);
1376        at76_dbg(DBG_PARAMS,
1377                 "%s param: pm_mode %d pm_period %d auth_mode %s "
1378                 "scan_times %d %d scan_mode %s",
1379                 wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period,
1380                 priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
1381                 priv->scan_min_time, priv->scan_max_time,
1382                 priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");
1383
1384        memset(ccfg, 0, sizeof(struct at76_card_config));
1385        ccfg->promiscuous_mode = 0;
1386        ccfg->short_retry_limit = priv->short_retry_limit;
1387
1388        if (priv->wep_enabled) {
1389                if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
1390                        ccfg->encryption_type = 2;
1391                else
1392                        ccfg->encryption_type = 1;
1393
1394                /* jal: always exclude unencrypted if WEP is active */
1395                ccfg->exclude_unencrypted = 1;
1396        } else {
1397                ccfg->exclude_unencrypted = 0;
1398                ccfg->encryption_type = 0;
1399        }
1400
1401        ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold);
1402        ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold);
1403
1404        memcpy(ccfg->basic_rate_set, hw_rates, 4);
1405        /* jal: really needed, we do a set_mib for autorate later ??? */
1406        ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0);
1407        ccfg->channel = priv->channel;
1408        ccfg->privacy_invoked = priv->wep_enabled;
1409        memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE);
1410        ccfg->ssid_len = priv->essid_size;
1411
1412        ccfg->wep_default_key_id = priv->wep_key_id;
1413        memcpy(ccfg->wep_default_key_value, priv->wep_keys,
1414               sizeof(priv->wep_keys));
1415
1416        ccfg->short_preamble = priv->preamble_type;
1417        ccfg->beacon_period = cpu_to_le16(priv->beacon_period);
1418
1419        ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
1420                                    sizeof(struct at76_card_config));
1421        if (ret < 0) {
1422                wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
1423                          ret);
1424                return ret;
1425        }
1426
1427        at76_wait_completion(priv, CMD_STARTUP);
1428
1429        /* remove BSSID from previous run */
1430        eth_zero_addr(priv->bssid);
1431
1432        priv->scanning = false;
1433
1434        if (at76_set_radio(priv, 1) == 1)
1435                at76_wait_completion(priv, CMD_RADIO_ON);
1436
1437        ret = at76_set_preamble(priv, priv->preamble_type);
1438        if (ret < 0)
1439                return ret;
1440
1441        ret = at76_set_frag(priv, priv->frag_threshold);
1442        if (ret < 0)
1443                return ret;
1444
1445        ret = at76_set_rts(priv, priv->rts_threshold);
1446        if (ret < 0)
1447                return ret;
1448
1449        ret = at76_set_autorate_fallback(priv,
1450                                         priv->txrate == TX_RATE_AUTO ? 1 : 0);
1451        if (ret < 0)
1452                return ret;
1453
1454        ret = at76_set_pm_mode(priv);
1455        if (ret < 0)
1456                return ret;
1457
1458        if (at76_debug & DBG_MIB) {
1459                at76_dump_mib_mac(priv);
1460                at76_dump_mib_mac_addr(priv);
1461                at76_dump_mib_mac_mgmt(priv);
1462                at76_dump_mib_mac_wep(priv);
1463                at76_dump_mib_mdomain(priv);
1464                at76_dump_mib_phy(priv);
1465                at76_dump_mib_local(priv);
1466        }
1467
1468        return 0;
1469}
1470
1471/* Enable or disable promiscuous mode */
1472static void at76_work_set_promisc(struct work_struct *work)
1473{
1474        struct at76_priv *priv = container_of(work, struct at76_priv,
1475                                              work_set_promisc);
1476        int ret = 0;
1477
1478        if (priv->device_unplugged)
1479                return;
1480
1481        mutex_lock(&priv->mtx);
1482
1483        priv->mib_buf.type = MIB_LOCAL;
1484        priv->mib_buf.size = 1;
1485        priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode);
1486        priv->mib_buf.data.byte = priv->promisc ? 1 : 0;
1487
1488        ret = at76_set_mib(priv, &priv->mib_buf);
1489        if (ret < 0)
1490                wiphy_err(priv->hw->wiphy,
1491                          "set_mib (promiscuous_mode) failed: %d\n", ret);
1492
1493        mutex_unlock(&priv->mtx);
1494}
1495
1496/* Submit Rx urb back to the device */
1497static void at76_work_submit_rx(struct work_struct *work)
1498{
1499        struct at76_priv *priv = container_of(work, struct at76_priv,
1500                                              work_submit_rx);
1501
1502        mutex_lock(&priv->mtx);
1503        at76_submit_rx_urb(priv);
1504        mutex_unlock(&priv->mtx);
1505}
1506
1507/* This is a workaround to make scan working:
1508 * currently mac80211 does not process frames with no frequency
1509 * information.
1510 * However during scan the HW performs a sweep by itself, and we
1511 * are unable to know where the radio is actually tuned.
1512 * This function tries to do its best to guess this information..
1513 * During scan, If the current frame is a beacon or a probe response,
1514 * the channel information is extracted from it.
1515 * When not scanning, for other frames, or if it happens that for
1516 * whatever reason we fail to parse beacons and probe responses, this
1517 * function returns the priv->channel information, that should be correct
1518 * at least when we are not scanning.
1519 */
1520static inline int at76_guess_freq(struct at76_priv *priv)
1521{
1522        size_t el_off;
1523        const u8 *el;
1524        int channel = priv->channel;
1525        int len = priv->rx_skb->len;
1526        struct ieee80211_hdr *hdr = (void *)priv->rx_skb->data;
1527
1528        if (!priv->scanning)
1529                goto exit;
1530
1531        if (len < 24)
1532                goto exit;
1533
1534        if (ieee80211_is_probe_resp(hdr->frame_control)) {
1535                el_off = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
1536                el = ((struct ieee80211_mgmt *)hdr)->u.probe_resp.variable;
1537        } else if (ieee80211_is_beacon(hdr->frame_control)) {
1538                el_off = offsetof(struct ieee80211_mgmt, u.beacon.variable);
1539                el = ((struct ieee80211_mgmt *)hdr)->u.beacon.variable;
1540        } else {
1541                goto exit;
1542        }
1543        len -= el_off;
1544
1545        el = cfg80211_find_ie(WLAN_EID_DS_PARAMS, el, len);
1546        if (el && el[1] > 0)
1547                channel = el[2];
1548
1549exit:
1550        return ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ);
1551}
1552
1553static void at76_rx_tasklet(unsigned long param)
1554{
1555        struct urb *urb = (struct urb *)param;
1556        struct at76_priv *priv = urb->context;
1557        struct at76_rx_buffer *buf;
1558        struct ieee80211_rx_status rx_status = { 0 };
1559
1560        if (priv->device_unplugged) {
1561                at76_dbg(DBG_DEVSTART, "device unplugged");
1562                at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
1563                return;
1564        }
1565
1566        if (!priv->rx_skb || !priv->rx_skb->data)
1567                return;
1568
1569        buf = (struct at76_rx_buffer *)priv->rx_skb->data;
1570
1571        if (urb->status != 0) {
1572                if (urb->status != -ENOENT && urb->status != -ECONNRESET)
1573                        at76_dbg(DBG_URB,
1574                                 "%s %s: - nonzero Rx bulk status received: %d",
1575                                 __func__, wiphy_name(priv->hw->wiphy),
1576                                 urb->status);
1577                return;
1578        }
1579
1580        at76_dbg(DBG_RX_ATMEL_HDR,
1581                 "%s: rx frame: rate %d rssi %d noise %d link %d",
1582                 wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi,
1583                 buf->noise_level, buf->link_quality);
1584
1585        skb_pull(priv->rx_skb, AT76_RX_HDRLEN);
1586        skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength));
1587        at76_dbg_dump(DBG_RX_DATA, priv->rx_skb->data,
1588                      priv->rx_skb->len, "RX: len=%d", priv->rx_skb->len);
1589
1590        rx_status.signal = buf->rssi;
1591        rx_status.flag |= RX_FLAG_DECRYPTED;
1592        rx_status.flag |= RX_FLAG_IV_STRIPPED;
1593        rx_status.band = NL80211_BAND_2GHZ;
1594        rx_status.freq = at76_guess_freq(priv);
1595
1596        at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d",
1597                 priv->rx_skb->len, priv->rx_skb->data_len);
1598        memcpy(IEEE80211_SKB_RXCB(priv->rx_skb), &rx_status, sizeof(rx_status));
1599        ieee80211_rx_irqsafe(priv->hw, priv->rx_skb);
1600
1601        /* Use a new skb for the next receive */
1602        priv->rx_skb = NULL;
1603
1604        at76_submit_rx_urb(priv);
1605}
1606
1607/* Load firmware into kernel memory and parse it */
1608static struct fwentry *at76_load_firmware(struct usb_device *udev,
1609                                          enum board_type board_type)
1610{
1611        int ret;
1612        char *str;
1613        struct at76_fw_header *fwh;
1614        struct fwentry *fwe = &firmwares[board_type];
1615
1616        mutex_lock(&fw_mutex);
1617
1618        if (fwe->loaded) {
1619                at76_dbg(DBG_FW, "re-using previously loaded fw");
1620                goto exit;
1621        }
1622
1623        at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
1624        ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
1625        if (ret < 0) {
1626                dev_err(&udev->dev, "firmware %s not found!\n",
1627                        fwe->fwname);
1628                dev_err(&udev->dev,
1629                        "you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n");
1630                goto exit;
1631        }
1632
1633        at76_dbg(DBG_FW, "got it.");
1634        fwh = (struct at76_fw_header *)(fwe->fw->data);
1635
1636        if (fwe->fw->size <= sizeof(*fwh)) {
1637                dev_err(&udev->dev,
1638                        "firmware is too short (0x%zx)\n", fwe->fw->size);
1639                goto exit;
1640        }
1641
1642        /* CRC currently not checked */
1643        fwe->board_type = le32_to_cpu(fwh->board_type);
1644        if (fwe->board_type != board_type) {
1645                dev_err(&udev->dev,
1646                        "board type mismatch, requested %u, got %u\n",
1647                        board_type, fwe->board_type);
1648                goto exit;
1649        }
1650
1651        fwe->fw_version.major = fwh->major;
1652        fwe->fw_version.minor = fwh->minor;
1653        fwe->fw_version.patch = fwh->patch;
1654        fwe->fw_version.build = fwh->build;
1655
1656        str = (char *)fwh + le32_to_cpu(fwh->str_offset);
1657        fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
1658        fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
1659        fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
1660        fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);
1661
1662        fwe->loaded = 1;
1663
1664        dev_printk(KERN_DEBUG, &udev->dev,
1665                   "using firmware %s (version %d.%d.%d-%d)\n",
1666                   fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);
1667
1668        at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
1669                 le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
1670                 le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
1671        at76_dbg(DBG_DEVSTART, "firmware id %s", str);
1672
1673exit:
1674        mutex_unlock(&fw_mutex);
1675
1676        if (fwe->loaded)
1677                return fwe;
1678        else
1679                return NULL;
1680}
1681
1682static int at76_join(struct at76_priv *priv)
1683{
1684        struct at76_req_join join;
1685        int ret;
1686
1687        memset(&join, 0, sizeof(struct at76_req_join));
1688        memcpy(join.essid, priv->essid, priv->essid_size);
1689        join.essid_size = priv->essid_size;
1690        memcpy(join.bssid, priv->bssid, ETH_ALEN);
1691        join.bss_type = INFRASTRUCTURE_MODE;
1692        join.channel = priv->channel;
1693        join.timeout = cpu_to_le16(2000);
1694
1695        at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__);
1696        ret = at76_set_card_command(priv->udev, CMD_JOIN, &join,
1697                                    sizeof(struct at76_req_join));
1698
1699        if (ret < 0) {
1700                wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
1701                          ret);
1702                return 0;
1703        }
1704
1705        ret = at76_wait_completion(priv, CMD_JOIN);
1706        at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret);
1707        if (ret != CMD_STATUS_COMPLETE) {
1708                wiphy_err(priv->hw->wiphy, "at76_wait_completion failed: %d\n",
1709                          ret);
1710                return 0;
1711        }
1712
1713        at76_set_pm_mode(priv);
1714
1715        return 0;
1716}
1717
1718static void at76_work_join_bssid(struct work_struct *work)
1719{
1720        struct at76_priv *priv = container_of(work, struct at76_priv,
1721                                              work_join_bssid);
1722
1723        if (priv->device_unplugged)
1724                return;
1725
1726        mutex_lock(&priv->mtx);
1727
1728        if (is_valid_ether_addr(priv->bssid))
1729                at76_join(priv);
1730
1731        mutex_unlock(&priv->mtx);
1732}
1733
1734static void at76_mac80211_tx_callback(struct urb *urb)
1735{
1736        struct at76_priv *priv = urb->context;
1737        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb);
1738
1739        at76_dbg(DBG_MAC80211, "%s()", __func__);
1740
1741        switch (urb->status) {
1742        case 0:
1743                /* success */
1744                info->flags |= IEEE80211_TX_STAT_ACK;
1745                break;
1746        case -ENOENT:
1747        case -ECONNRESET:
1748                /* fail, urb has been unlinked */
1749                /* FIXME: add error message */
1750                break;
1751        default:
1752                at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
1753                         __func__, urb->status);
1754                break;
1755        }
1756
1757        memset(&info->status, 0, sizeof(info->status));
1758
1759        ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb);
1760
1761        priv->tx_skb = NULL;
1762
1763        ieee80211_wake_queues(priv->hw);
1764}
1765
1766static void at76_mac80211_tx(struct ieee80211_hw *hw,
1767                             struct ieee80211_tx_control *control,
1768                             struct sk_buff *skb)
1769{
1770        struct at76_priv *priv = hw->priv;
1771        struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
1772        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1773        struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
1774        int padding, submit_len, ret;
1775
1776        at76_dbg(DBG_MAC80211, "%s()", __func__);
1777
1778        if (priv->tx_urb->status == -EINPROGRESS) {
1779                wiphy_err(priv->hw->wiphy,
1780                          "%s called while tx urb is pending\n", __func__);
1781                dev_kfree_skb_any(skb);
1782                return;
1783        }
1784
1785        /* The following code lines are important when the device is going to
1786         * authenticate with a new bssid. The driver must send CMD_JOIN before
1787         * an authentication frame is transmitted. For this to succeed, the
1788         * correct bssid of the AP must be known. As mac80211 does not inform
1789         * drivers about the bssid prior to the authentication process the
1790         * following workaround is necessary. If the TX frame is an
1791         * authentication frame extract the bssid and send the CMD_JOIN. */
1792        if (mgmt->frame_control & cpu_to_le16(IEEE80211_STYPE_AUTH)) {
1793                if (!ether_addr_equal_64bits(priv->bssid, mgmt->bssid)) {
1794                        memcpy(priv->bssid, mgmt->bssid, ETH_ALEN);
1795                        ieee80211_queue_work(hw, &priv->work_join_bssid);
1796                        dev_kfree_skb_any(skb);
1797                        return;
1798                }
1799        }
1800
1801        ieee80211_stop_queues(hw);
1802
1803        at76_ledtrig_tx_activity();     /* tell ledtrigger we send a packet */
1804
1805        WARN_ON(priv->tx_skb != NULL);
1806
1807        priv->tx_skb = skb;
1808        padding = at76_calc_padding(skb->len);
1809        submit_len = AT76_TX_HDRLEN + skb->len + padding;
1810
1811        /* setup 'Atmel' header */
1812        memset(tx_buffer, 0, sizeof(*tx_buffer));
1813        tx_buffer->padding = padding;
1814        tx_buffer->wlength = cpu_to_le16(skb->len);
1815        tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value;
1816        memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved));
1817        memcpy(tx_buffer->packet, skb->data, skb->len);
1818
1819        at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr",
1820                 wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength),
1821                 tx_buffer->padding, tx_buffer->tx_rate);
1822
1823        /* send stuff */
1824        at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len,
1825                      "%s(): tx_buffer %d bytes:", __func__, submit_len);
1826        usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
1827                          submit_len, at76_mac80211_tx_callback, priv);
1828        ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
1829        if (ret) {
1830                wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret);
1831                if (ret == -EINVAL)
1832                        wiphy_err(priv->hw->wiphy,
1833                                  "-EINVAL: tx urb %p hcpriv %p complete %p\n",
1834                                  priv->tx_urb,
1835                                  priv->tx_urb->hcpriv, priv->tx_urb->complete);
1836        }
1837}
1838
1839static int at76_mac80211_start(struct ieee80211_hw *hw)
1840{
1841        struct at76_priv *priv = hw->priv;
1842        int ret;
1843
1844        at76_dbg(DBG_MAC80211, "%s()", __func__);
1845
1846        mutex_lock(&priv->mtx);
1847
1848        ret = at76_submit_rx_urb(priv);
1849        if (ret < 0) {
1850                wiphy_err(priv->hw->wiphy, "open: submit_rx_urb failed: %d\n",
1851                          ret);
1852                goto error;
1853        }
1854
1855        at76_startup_device(priv);
1856
1857        at76_start_monitor(priv);
1858
1859error:
1860        mutex_unlock(&priv->mtx);
1861
1862        return 0;
1863}
1864
1865static void at76_mac80211_stop(struct ieee80211_hw *hw)
1866{
1867        struct at76_priv *priv = hw->priv;
1868
1869        at76_dbg(DBG_MAC80211, "%s()", __func__);
1870
1871        cancel_delayed_work(&priv->dwork_hw_scan);
1872        cancel_work_sync(&priv->work_join_bssid);
1873        cancel_work_sync(&priv->work_set_promisc);
1874
1875        mutex_lock(&priv->mtx);
1876
1877        if (!priv->device_unplugged) {
1878                /* We are called by "ifconfig ethX down", not because the
1879                 * device is not available anymore. */
1880                at76_set_radio(priv, 0);
1881
1882                /* We unlink rx_urb because at76_open() re-submits it.
1883                 * If unplugged, at76_delete_device() takes care of it. */
1884                usb_kill_urb(priv->rx_urb);
1885        }
1886
1887        mutex_unlock(&priv->mtx);
1888}
1889
1890static int at76_add_interface(struct ieee80211_hw *hw,
1891                              struct ieee80211_vif *vif)
1892{
1893        struct at76_priv *priv = hw->priv;
1894        int ret = 0;
1895
1896        at76_dbg(DBG_MAC80211, "%s()", __func__);
1897
1898        mutex_lock(&priv->mtx);
1899
1900        switch (vif->type) {
1901        case NL80211_IFTYPE_STATION:
1902                priv->iw_mode = IW_MODE_INFRA;
1903                break;
1904        default:
1905                ret = -EOPNOTSUPP;
1906                goto exit;
1907        }
1908
1909exit:
1910        mutex_unlock(&priv->mtx);
1911
1912        return ret;
1913}
1914
1915static void at76_remove_interface(struct ieee80211_hw *hw,
1916                                  struct ieee80211_vif *vif)
1917{
1918        at76_dbg(DBG_MAC80211, "%s()", __func__);
1919}
1920
1921static void at76_dwork_hw_scan(struct work_struct *work)
1922{
1923        struct at76_priv *priv = container_of(work, struct at76_priv,
1924                                              dwork_hw_scan.work);
1925        struct cfg80211_scan_info info = {
1926                .aborted = false,
1927        };
1928        int ret;
1929
1930        if (priv->device_unplugged)
1931                return;
1932
1933        mutex_lock(&priv->mtx);
1934
1935        ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
1936        at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret);
1937
1938        /* FIXME: add maximum time for scan to complete */
1939
1940        if (ret != CMD_STATUS_COMPLETE) {
1941                ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
1942                                             SCAN_POLL_INTERVAL);
1943                mutex_unlock(&priv->mtx);
1944                return;
1945        }
1946
1947        if (is_valid_ether_addr(priv->bssid))
1948                at76_join(priv);
1949
1950        priv->scanning = false;
1951
1952        mutex_unlock(&priv->mtx);
1953
1954        ieee80211_scan_completed(priv->hw, &info);
1955
1956        ieee80211_wake_queues(priv->hw);
1957}
1958
1959static int at76_hw_scan(struct ieee80211_hw *hw,
1960                        struct ieee80211_vif *vif,
1961                        struct ieee80211_scan_request *hw_req)
1962{
1963        struct cfg80211_scan_request *req = &hw_req->req;
1964        struct at76_priv *priv = hw->priv;
1965        struct at76_req_scan scan;
1966        u8 *ssid = NULL;
1967        int ret, len = 0;
1968
1969        at76_dbg(DBG_MAC80211, "%s():", __func__);
1970
1971        if (priv->device_unplugged)
1972                return 0;
1973
1974        mutex_lock(&priv->mtx);
1975
1976        ieee80211_stop_queues(hw);
1977
1978        memset(&scan, 0, sizeof(struct at76_req_scan));
1979        eth_broadcast_addr(scan.bssid);
1980
1981        if (req->n_ssids) {
1982                scan.scan_type = SCAN_TYPE_ACTIVE;
1983                ssid = req->ssids[0].ssid;
1984                len = req->ssids[0].ssid_len;
1985        } else {
1986                scan.scan_type = SCAN_TYPE_PASSIVE;
1987        }
1988
1989        if (len) {
1990                memcpy(scan.essid, ssid, len);
1991                scan.essid_size = len;
1992        }
1993
1994        scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
1995        scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
1996        scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
1997        scan.international_scan = 0;
1998
1999        at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__);
2000        ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
2001
2002        if (ret < 0) {
2003                wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret);
2004                goto exit;
2005        }
2006
2007        priv->scanning = true;
2008        ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
2009                                     SCAN_POLL_INTERVAL);
2010
2011exit:
2012        mutex_unlock(&priv->mtx);
2013
2014        return 0;
2015}
2016
2017static int at76_config(struct ieee80211_hw *hw, u32 changed)
2018{
2019        struct at76_priv *priv = hw->priv;
2020
2021        at76_dbg(DBG_MAC80211, "%s(): channel %d",
2022                 __func__, hw->conf.chandef.chan->hw_value);
2023        at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");
2024
2025        mutex_lock(&priv->mtx);
2026
2027        priv->channel = hw->conf.chandef.chan->hw_value;
2028
2029        if (is_valid_ether_addr(priv->bssid))
2030                at76_join(priv);
2031        else
2032                at76_start_monitor(priv);
2033
2034        mutex_unlock(&priv->mtx);
2035
2036        return 0;
2037}
2038
2039static void at76_bss_info_changed(struct ieee80211_hw *hw,
2040                                  struct ieee80211_vif *vif,
2041                                  struct ieee80211_bss_conf *conf,
2042                                  u32 changed)
2043{
2044        struct at76_priv *priv = hw->priv;
2045
2046        at76_dbg(DBG_MAC80211, "%s():", __func__);
2047
2048        if (!(changed & BSS_CHANGED_BSSID))
2049                return;
2050
2051        at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");
2052
2053        mutex_lock(&priv->mtx);
2054
2055        memcpy(priv->bssid, conf->bssid, ETH_ALEN);
2056
2057        if (is_valid_ether_addr(priv->bssid))
2058                /* mac80211 is joining a bss */
2059                at76_join(priv);
2060
2061        mutex_unlock(&priv->mtx);
2062}
2063
2064/* must be atomic */
2065static void at76_configure_filter(struct ieee80211_hw *hw,
2066                                  unsigned int changed_flags,
2067                                  unsigned int *total_flags, u64 multicast)
2068{
2069        struct at76_priv *priv = hw->priv;
2070        int flags;
2071
2072        at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x "
2073                 "total_flags=0x%08x",
2074                 __func__, changed_flags, *total_flags);
2075
2076        flags = changed_flags & AT76_SUPPORTED_FILTERS;
2077        *total_flags = AT76_SUPPORTED_FILTERS;
2078
2079        /* Bail out after updating flags to prevent a WARN_ON in mac80211. */
2080        if (priv->device_unplugged)
2081                return;
2082
2083        /* FIXME: access to priv->promisc should be protected with
2084         * priv->mtx, but it's impossible because this function needs to be
2085         * atomic */
2086
2087        if (flags && !priv->promisc) {
2088                /* mac80211 wants us to enable promiscuous mode */
2089                priv->promisc = 1;
2090        } else if (!flags && priv->promisc) {
2091                /* we need to disable promiscuous mode */
2092                priv->promisc = 0;
2093        } else
2094                return;
2095
2096        ieee80211_queue_work(hw, &priv->work_set_promisc);
2097}
2098
2099static int at76_set_wep(struct at76_priv *priv)
2100{
2101        int ret = 0;
2102        struct mib_mac_wep *mib_data = &priv->mib_buf.data.wep_mib;
2103
2104        priv->mib_buf.type = MIB_MAC_WEP;
2105        priv->mib_buf.size = sizeof(struct mib_mac_wep);
2106        priv->mib_buf.index = 0;
2107
2108        memset(mib_data, 0, sizeof(*mib_data));
2109
2110        if (priv->wep_enabled) {
2111                if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
2112                        mib_data->encryption_level = 2;
2113                else
2114                        mib_data->encryption_level = 1;
2115
2116                /* always exclude unencrypted if WEP is active */
2117                mib_data->exclude_unencrypted = 1;
2118        } else {
2119                mib_data->exclude_unencrypted = 0;
2120                mib_data->encryption_level = 0;
2121        }
2122
2123        mib_data->privacy_invoked = priv->wep_enabled;
2124        mib_data->wep_default_key_id = priv->wep_key_id;
2125        memcpy(mib_data->wep_default_keyvalue, priv->wep_keys,
2126               sizeof(priv->wep_keys));
2127
2128        ret = at76_set_mib(priv, &priv->mib_buf);
2129
2130        if (ret < 0)
2131                wiphy_err(priv->hw->wiphy,
2132                          "set_mib (wep) failed: %d\n", ret);
2133
2134        return ret;
2135}
2136
2137static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2138                        struct ieee80211_vif *vif, struct ieee80211_sta *sta,
2139                        struct ieee80211_key_conf *key)
2140{
2141        struct at76_priv *priv = hw->priv;
2142
2143        int i;
2144
2145        at76_dbg(DBG_MAC80211, "%s(): cmd %d key->cipher %d key->keyidx %d "
2146                 "key->keylen %d",
2147                 __func__, cmd, key->cipher, key->keyidx, key->keylen);
2148
2149        if ((key->cipher != WLAN_CIPHER_SUITE_WEP40) &&
2150            (key->cipher != WLAN_CIPHER_SUITE_WEP104))
2151                return -EOPNOTSUPP;
2152
2153        key->hw_key_idx = key->keyidx;
2154
2155        mutex_lock(&priv->mtx);
2156
2157        switch (cmd) {
2158        case SET_KEY:
2159                memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen);
2160                priv->wep_keys_len[key->keyidx] = key->keylen;
2161
2162                /* FIXME: find out how to do this properly */
2163                priv->wep_key_id = key->keyidx;
2164
2165                break;
2166        case DISABLE_KEY:
2167        default:
2168                priv->wep_keys_len[key->keyidx] = 0;
2169                break;
2170        }
2171
2172        priv->wep_enabled = 0;
2173
2174        for (i = 0; i < WEP_KEYS; i++) {
2175                if (priv->wep_keys_len[i] != 0)
2176                        priv->wep_enabled = 1;
2177        }
2178
2179        at76_set_wep(priv);
2180
2181        mutex_unlock(&priv->mtx);
2182
2183        return 0;
2184}
2185
2186static const struct ieee80211_ops at76_ops = {
2187        .tx = at76_mac80211_tx,
2188        .add_interface = at76_add_interface,
2189        .remove_interface = at76_remove_interface,
2190        .config = at76_config,
2191        .bss_info_changed = at76_bss_info_changed,
2192        .configure_filter = at76_configure_filter,
2193        .start = at76_mac80211_start,
2194        .stop = at76_mac80211_stop,
2195        .hw_scan = at76_hw_scan,
2196        .set_key = at76_set_key,
2197};
2198
2199/* Allocate network device and initialize private data */
2200static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
2201{
2202        struct ieee80211_hw *hw;
2203        struct at76_priv *priv;
2204
2205        hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops);
2206        if (!hw) {
2207                printk(KERN_ERR DRIVER_NAME ": could not register"
2208                       " ieee80211_hw\n");
2209                return NULL;
2210        }
2211
2212        priv = hw->priv;
2213        priv->hw = hw;
2214
2215        priv->udev = udev;
2216
2217        mutex_init(&priv->mtx);
2218        INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc);
2219        INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
2220        INIT_WORK(&priv->work_join_bssid, at76_work_join_bssid);
2221        INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan);
2222
2223        tasklet_init(&priv->rx_tasklet, at76_rx_tasklet, 0);
2224
2225        priv->pm_mode = AT76_PM_OFF;
2226        priv->pm_period = 0;
2227
2228        /* unit us */
2229
2230        return priv;
2231}
2232
2233static int at76_alloc_urbs(struct at76_priv *priv,
2234                           struct usb_interface *interface)
2235{
2236        struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out;
2237        int i;
2238        int buffer_size;
2239        struct usb_host_interface *iface_desc;
2240
2241        at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
2242
2243        at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__,
2244                 interface->altsetting[0].desc.bNumEndpoints);
2245
2246        ep_in = NULL;
2247        ep_out = NULL;
2248        iface_desc = interface->cur_altsetting;
2249        for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
2250                endpoint = &iface_desc->endpoint[i].desc;
2251
2252                at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x",
2253                         __func__, i, endpoint->bEndpointAddress,
2254                         endpoint->bmAttributes);
2255
2256                if (!ep_in && usb_endpoint_is_bulk_in(endpoint))
2257                        ep_in = endpoint;
2258
2259                if (!ep_out && usb_endpoint_is_bulk_out(endpoint))
2260                        ep_out = endpoint;
2261        }
2262
2263        if (!ep_in || !ep_out) {
2264                dev_err(&interface->dev, "bulk endpoints missing\n");
2265                return -ENXIO;
2266        }
2267
2268        priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress);
2269        priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress);
2270
2271        priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
2272        priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2273        if (!priv->rx_urb || !priv->tx_urb) {
2274                dev_err(&interface->dev, "cannot allocate URB\n");
2275                return -ENOMEM;
2276        }
2277
2278        buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
2279        priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
2280        if (!priv->bulk_out_buffer)
2281                return -ENOMEM;
2282
2283        at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
2284
2285        return 0;
2286}
2287
2288static struct ieee80211_rate at76_rates[] = {
2289        { .bitrate = 10, .hw_value = TX_RATE_1MBIT, },
2290        { .bitrate = 20, .hw_value = TX_RATE_2MBIT, },
2291        { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, },
2292        { .bitrate = 110, .hw_value = TX_RATE_11MBIT, },
2293};
2294
2295static struct ieee80211_channel at76_channels[] = {
2296        { .center_freq = 2412, .hw_value = 1 },
2297        { .center_freq = 2417, .hw_value = 2 },
2298        { .center_freq = 2422, .hw_value = 3 },
2299        { .center_freq = 2427, .hw_value = 4 },
2300        { .center_freq = 2432, .hw_value = 5 },
2301        { .center_freq = 2437, .hw_value = 6 },
2302        { .center_freq = 2442, .hw_value = 7 },
2303        { .center_freq = 2447, .hw_value = 8 },
2304        { .center_freq = 2452, .hw_value = 9 },
2305        { .center_freq = 2457, .hw_value = 10 },
2306        { .center_freq = 2462, .hw_value = 11 },
2307        { .center_freq = 2467, .hw_value = 12 },
2308        { .center_freq = 2472, .hw_value = 13 },
2309        { .center_freq = 2484, .hw_value = 14 }
2310};
2311
2312static struct ieee80211_supported_band at76_supported_band = {
2313        .channels = at76_channels,
2314        .n_channels = ARRAY_SIZE(at76_channels),
2315        .bitrates = at76_rates,
2316        .n_bitrates = ARRAY_SIZE(at76_rates),
2317};
2318
2319/* Register network device and initialize the hardware */
2320static int at76_init_new_device(struct at76_priv *priv,
2321                                struct usb_interface *interface)
2322{
2323        struct wiphy *wiphy;
2324        size_t len;
2325        int ret;
2326
2327        /* set up the endpoint information */
2328        /* check out the endpoints */
2329
2330        at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints",
2331                 interface->cur_altsetting->desc.bNumEndpoints);
2332
2333        ret = at76_alloc_urbs(priv, interface);
2334        if (ret < 0)
2335                goto exit;
2336
2337        /* MAC address */
2338        ret = at76_get_hw_config(priv);
2339        if (ret < 0) {
2340                dev_err(&interface->dev, "cannot get MAC address\n");
2341                goto exit;
2342        }
2343
2344        priv->domain = at76_get_reg_domain(priv->regulatory_domain);
2345
2346        priv->channel = DEF_CHANNEL;
2347        priv->iw_mode = IW_MODE_INFRA;
2348        priv->rts_threshold = DEF_RTS_THRESHOLD;
2349        priv->frag_threshold = DEF_FRAG_THRESHOLD;
2350        priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT;
2351        priv->txrate = TX_RATE_AUTO;
2352        priv->preamble_type = PREAMBLE_TYPE_LONG;
2353        priv->beacon_period = 100;
2354        priv->auth_mode = WLAN_AUTH_OPEN;
2355        priv->scan_min_time = DEF_SCAN_MIN_TIME;
2356        priv->scan_max_time = DEF_SCAN_MAX_TIME;
2357        priv->scan_mode = SCAN_TYPE_ACTIVE;
2358        priv->device_unplugged = 0;
2359
2360        /* mac80211 initialisation */
2361        wiphy = priv->hw->wiphy;
2362        priv->hw->wiphy->max_scan_ssids = 1;
2363        priv->hw->wiphy->max_scan_ie_len = 0;
2364        priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
2365        priv->hw->wiphy->bands[NL80211_BAND_2GHZ] = &at76_supported_band;
2366        ieee80211_hw_set(priv->hw, RX_INCLUDES_FCS);
2367        ieee80211_hw_set(priv->hw, SIGNAL_UNSPEC);
2368        priv->hw->max_signal = 100;
2369
2370        SET_IEEE80211_DEV(priv->hw, &interface->dev);
2371        SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
2372
2373        len = sizeof(wiphy->fw_version);
2374        snprintf(wiphy->fw_version, len, "%d.%d.%d-%d",
2375                 priv->fw_version.major, priv->fw_version.minor,
2376                 priv->fw_version.patch, priv->fw_version.build);
2377
2378        wiphy->hw_version = priv->board_type;
2379
2380        wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
2381
2382        ret = ieee80211_register_hw(priv->hw);
2383        if (ret) {
2384                printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
2385                       ret);
2386                goto exit;
2387        }
2388
2389        priv->mac80211_registered = 1;
2390
2391        wiphy_info(priv->hw->wiphy, "USB %s, MAC %pM, firmware %d.%d.%d-%d\n",
2392                   dev_name(&interface->dev), priv->mac_addr,
2393                   priv->fw_version.major, priv->fw_version.minor,
2394                   priv->fw_version.patch, priv->fw_version.build);
2395        wiphy_info(priv->hw->wiphy, "regulatory domain 0x%02x: %s\n",
2396                   priv->regulatory_domain, priv->domain->name);
2397
2398exit:
2399        return ret;
2400}
2401
2402static void at76_delete_device(struct at76_priv *priv)
2403{
2404        at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
2405
2406        /* The device is gone, don't bother turning it off */
2407        priv->device_unplugged = 1;
2408
2409        tasklet_kill(&priv->rx_tasklet);
2410
2411        if (priv->mac80211_registered)
2412                ieee80211_unregister_hw(priv->hw);
2413
2414        if (priv->tx_urb) {
2415                usb_kill_urb(priv->tx_urb);
2416                usb_free_urb(priv->tx_urb);
2417        }
2418        if (priv->rx_urb) {
2419                usb_kill_urb(priv->rx_urb);
2420                usb_free_urb(priv->rx_urb);
2421        }
2422
2423        at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);
2424
2425        kfree(priv->bulk_out_buffer);
2426
2427        del_timer_sync(&ledtrig_tx_timer);
2428
2429        kfree_skb(priv->rx_skb);
2430
2431        at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw",
2432                 __func__);
2433        ieee80211_free_hw(priv->hw);
2434
2435        at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
2436}
2437
2438static int at76_probe(struct usb_interface *interface,
2439                      const struct usb_device_id *id)
2440{
2441        int ret;
2442        struct at76_priv *priv;
2443        struct fwentry *fwe;
2444        struct usb_device *udev;
2445        int op_mode;
2446        int need_ext_fw = 0;
2447        struct mib_fw_version *fwv = NULL;
2448        int board_type = (int)id->driver_info;
2449
2450        udev = usb_get_dev(interface_to_usbdev(interface));
2451
2452        fwv = kmalloc(sizeof(*fwv), GFP_KERNEL);
2453        if (!fwv) {
2454                ret = -ENOMEM;
2455                goto exit;
2456        }
2457
2458        /* Load firmware into kernel memory */
2459        fwe = at76_load_firmware(udev, board_type);
2460        if (!fwe) {
2461                ret = -ENOENT;
2462                goto exit;
2463        }
2464
2465        op_mode = at76_get_op_mode(udev);
2466
2467        at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
2468
2469        /* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ???
2470           we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
2471
2472        if (op_mode == OPMODE_HW_CONFIG_MODE) {
2473                dev_err(&interface->dev,
2474                        "cannot handle a device in HW_CONFIG_MODE\n");
2475                ret = -EBUSY;
2476                goto exit;
2477        }
2478
2479        if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
2480            && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
2481                /* download internal firmware part */
2482                dev_printk(KERN_DEBUG, &interface->dev,
2483                           "downloading internal firmware\n");
2484                ret = at76_load_internal_fw(udev, fwe);
2485                if (ret < 0) {
2486                        dev_err(&interface->dev,
2487                                "error %d downloading internal firmware\n",
2488                                ret);
2489                }
2490                goto exit;
2491        }
2492
2493        /* Internal firmware already inside the device.  Get firmware
2494         * version to test if external firmware is loaded.
2495         * This works only for newer firmware, e.g. the Intersil 0.90.x
2496         * says "control timeout on ep0in" and subsequent
2497         * at76_get_op_mode() fail too :-( */
2498
2499        /* if version >= 0.100.x.y or device with built-in flash we can
2500         * query the device for the fw version */
2501        if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100)
2502            || (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) {
2503                ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv));
2504                if (ret < 0 || (fwv->major | fwv->minor) == 0)
2505                        need_ext_fw = 1;
2506        } else
2507                /* No way to check firmware version, reload to be sure */
2508                need_ext_fw = 1;
2509
2510        if (need_ext_fw) {
2511                dev_printk(KERN_DEBUG, &interface->dev,
2512                           "downloading external firmware\n");
2513
2514                ret = at76_load_external_fw(udev, fwe);
2515                if (ret < 0)
2516                        goto exit;
2517
2518                /* Re-check firmware version */
2519                ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv));
2520                if (ret < 0) {
2521                        dev_err(&interface->dev,
2522                                "error %d getting firmware version\n", ret);
2523                        goto exit;
2524                }
2525        }
2526
2527        priv = at76_alloc_new_device(udev);
2528        if (!priv) {
2529                ret = -ENOMEM;
2530                goto exit;
2531        }
2532
2533        usb_set_intfdata(interface, priv);
2534
2535        memcpy(&priv->fw_version, fwv, sizeof(struct mib_fw_version));
2536        priv->board_type = board_type;
2537
2538        ret = at76_init_new_device(priv, interface);
2539        if (ret < 0)
2540                at76_delete_device(priv);
2541
2542exit:
2543        kfree(fwv);
2544        if (ret < 0)
2545                usb_put_dev(udev);
2546        return ret;
2547}
2548
2549static void at76_disconnect(struct usb_interface *interface)
2550{
2551        struct at76_priv *priv;
2552
2553        priv = usb_get_intfdata(interface);
2554        usb_set_intfdata(interface, NULL);
2555
2556        /* Disconnect after loading internal firmware */
2557        if (!priv)
2558                return;
2559
2560        wiphy_info(priv->hw->wiphy, "disconnecting\n");
2561        at76_delete_device(priv);
2562        usb_put_dev(priv->udev);
2563        dev_info(&interface->dev, "disconnected\n");
2564}
2565
2566/* Structure for registering this driver with the USB subsystem */
2567static struct usb_driver at76_driver = {
2568        .name = DRIVER_NAME,
2569        .probe = at76_probe,
2570        .disconnect = at76_disconnect,
2571        .id_table = dev_table,
2572        .disable_hub_initiated_lpm = 1,
2573};
2574
2575static int __init at76_mod_init(void)
2576{
2577        int result;
2578
2579        printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n");
2580
2581        mutex_init(&fw_mutex);
2582
2583        /* register this driver with the USB subsystem */
2584        result = usb_register(&at76_driver);
2585        if (result < 0)
2586                printk(KERN_ERR DRIVER_NAME
2587                       ": usb_register failed (status %d)\n", result);
2588
2589        led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
2590        return result;
2591}
2592
2593static void __exit at76_mod_exit(void)
2594{
2595        int i;
2596
2597        printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n");
2598        usb_deregister(&at76_driver);
2599        for (i = 0; i < ARRAY_SIZE(firmwares); i++)
2600                release_firmware(firmwares[i].fw);
2601        led_trigger_unregister_simple(ledtrig_tx);
2602}
2603
2604module_param_named(debug, at76_debug, uint, 0600);
2605MODULE_PARM_DESC(debug, "Debugging level");
2606
2607module_init(at76_mod_init);
2608module_exit(at76_mod_exit);
2609
2610MODULE_AUTHOR("Oliver Kurth <oku@masqmail.cx>");
2611MODULE_AUTHOR("Joerg Albert <joerg.albert@gmx.de>");
2612MODULE_AUTHOR("Alex <alex@foogod.com>");
2613MODULE_AUTHOR("Nick Jones");
2614MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>");
2615MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
2616MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
2617MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>");
2618MODULE_AUTHOR("Sebastian Smolorz <sesmo@gmx.net>");
2619MODULE_DESCRIPTION(DRIVER_DESC);
2620MODULE_LICENSE("GPL");
2621