LXR linux/drivers/parisc/eisa.c

   1/*
   2 * eisa.c - provide support for EISA adapters in PA-RISC machines
   3 *
   4 * This program is free software; you can redistribute it and/or
   5 * modify it under the terms of the GNU General Public License
   6 * as published by the Free Software Foundation; either version
   7 * 2 of the License, or (at your option) any later version.
   8 *
   9 * Copyright (c) 2001 Matthew Wilcox for Hewlett Packard
  10 * Copyright (c) 2001 Daniel Engstrom <5116@telia.com>
  11 *
  12 * There are two distinct EISA adapters.  Mongoose is found in machines
  13 * before the 712; then the Wax ASIC is used.  To complicate matters, the
  14 * Wax ASIC also includes a PS/2 and RS-232 controller, but those are
  15 * dealt with elsewhere; this file is concerned only with the EISA portions
  16 * of Wax.
  17 *
  18 *
  19 * HINT:
  20 * -----
  21 * To allow an ISA card to work properly in the EISA slot you need to
  22 * set an edge trigger level. This may be done on the palo command line
  23 * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with
  24 * n and n2 as the irq levels you want to use.
  25 *
  26 * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at
  27 * irq levels 10 and 11.
  28 */
  29
  30#include <linux/init.h>
  31#include <linux/ioport.h>
  32#include <linux/interrupt.h>
  33#include <linux/kernel.h>
  34#include <linux/module.h>
  35#include <linux/pci.h>
  36#include <linux/spinlock.h>
  37#include <linux/eisa.h>
  38
  39#include <asm/byteorder.h>
  40#include <asm/io.h>
  41#include <asm/hardware.h>
  42#include <asm/processor.h>
  43#include <asm/parisc-device.h>
  44#include <asm/delay.h>
  45#include <asm/eisa_bus.h>
  46#include <asm/eisa_eeprom.h>
  47
  48#if 0
  49#define EISA_DBG(msg, arg...) printk(KERN_DEBUG "eisa: " msg, ## arg)
  50#else
  51#define EISA_DBG(msg, arg...)
  52#endif
  53
  54#define SNAKES_EEPROM_BASE_ADDR 0xF0810400
  55#define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400
  56
  57static DEFINE_SPINLOCK(eisa_irq_lock);
  58
  59void __iomem *eisa_eeprom_addr __read_mostly;
  60
  61/* We can only have one EISA adapter in the system because neither
  62 * implementation can be flexed.
  63 */
  64static struct eisa_ba {
  65        struct pci_hba_data     hba;
  66        unsigned long eeprom_addr;
  67        struct eisa_root_device root;
  68} eisa_dev;
  69
  70/* Port ops */
  71
  72static inline unsigned long eisa_permute(unsigned short port)
  73{
  74        if (port & 0x300) {
  75                return 0xfc000000 | ((port & 0xfc00) >> 6)
  76                        | ((port & 0x3f8) << 9) | (port & 7);
  77        } else {
  78                return 0xfc000000 | port;
  79        }
  80}
  81
  82unsigned char eisa_in8(unsigned short port)
  83{
  84        if (EISA_bus)
  85                return gsc_readb(eisa_permute(port));
  86        return 0xff;
  87}
  88
  89unsigned short eisa_in16(unsigned short port)
  90{
  91        if (EISA_bus)
  92                return le16_to_cpu(gsc_readw(eisa_permute(port)));
  93        return 0xffff;
  94}
  95
  96unsigned int eisa_in32(unsigned short port)
  97{
  98        if (EISA_bus)
  99                return le32_to_cpu(gsc_readl(eisa_permute(port)));
 100        return 0xffffffff;
 101}
 102
 103void eisa_out8(unsigned char data, unsigned short port)
 104{
 105        if (EISA_bus)
 106                gsc_writeb(data, eisa_permute(port));
 107}
 108
 109void eisa_out16(unsigned short data, unsigned short port)
 110{
 111        if (EISA_bus)
 112                gsc_writew(cpu_to_le16(data), eisa_permute(port));
 113}
 114
 115void eisa_out32(unsigned int data, unsigned short port)
 116{
 117        if (EISA_bus)
 118                gsc_writel(cpu_to_le32(data), eisa_permute(port));
 119}
 120
 121#ifndef CONFIG_PCI
 122/* We call these directly without PCI.  See asm/io.h. */
 123EXPORT_SYMBOL(eisa_in8);
 124EXPORT_SYMBOL(eisa_in16);
 125EXPORT_SYMBOL(eisa_in32);
 126EXPORT_SYMBOL(eisa_out8);
 127EXPORT_SYMBOL(eisa_out16);
 128EXPORT_SYMBOL(eisa_out32);
 129#endif
 130
 131/* Interrupt handling */
 132
 133/* cached interrupt mask registers */
 134static int master_mask;
 135static int slave_mask;
 136
 137/* the trig level can be set with the
 138 * eisa_irq_edge=n,n,n commandline parameter
 139 * We should really read this from the EEPROM
 140 * in the furure.
 141 */
 142/* irq 13,8,2,1,0 must be edge */
 143static unsigned int eisa_irq_level __read_mostly; /* default to edge triggered */
 144
 145
 146/* called by free irq */
 147static void eisa_mask_irq(struct irq_data *d)
 148{
 149        unsigned int irq = d->irq;
 150        unsigned long flags;
 151
 152        EISA_DBG("disable irq %d\n", irq);
 153        /* just mask for now */
 154        spin_lock_irqsave(&eisa_irq_lock, flags);
 155        if (irq & 8) {
 156                slave_mask |= (1 << (irq&7));
 157                eisa_out8(slave_mask, 0xa1);
 158        } else {
 159                master_mask |= (1 << (irq&7));
 160                eisa_out8(master_mask, 0x21);
 161        }
 162        spin_unlock_irqrestore(&eisa_irq_lock, flags);
 163        EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
 164        EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
 165}
 166
 167/* called by request irq */
 168static void eisa_unmask_irq(struct irq_data *d)
 169{
 170        unsigned int irq = d->irq;
 171        unsigned long flags;
 172        EISA_DBG("enable irq %d\n", irq);
 173
 174        spin_lock_irqsave(&eisa_irq_lock, flags);
 175        if (irq & 8) {
 176                slave_mask &= ~(1 << (irq&7));
 177                eisa_out8(slave_mask, 0xa1);
 178        } else {
 179                master_mask &= ~(1 << (irq&7));
 180                eisa_out8(master_mask, 0x21);
 181        }
 182        spin_unlock_irqrestore(&eisa_irq_lock, flags);
 183        EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
 184        EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
 185}
 186
 187static struct irq_chip eisa_interrupt_type = {
 188        .name           =       "EISA",
 189        .irq_unmask     =       eisa_unmask_irq,
 190        .irq_mask       =       eisa_mask_irq,
 191};
 192
 193static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
 194{
 195        int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */
 196        unsigned long flags;
 197
 198        spin_lock_irqsave(&eisa_irq_lock, flags);
 199        /* read IRR command */
 200        eisa_out8(0x0a, 0x20);
 201        eisa_out8(0x0a, 0xa0);
 202
 203        EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n",
 204                   irq, eisa_in8(0x20), eisa_in8(0xa0));
 205
 206        /* read ISR command */
 207        eisa_out8(0x0a, 0x20);
 208        eisa_out8(0x0a, 0xa0);
 209        EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n",
 210                 eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1));
 211
 212        irq &= 0xf;
 213
 214        /* mask irq and write eoi */
 215        if (irq & 8) {
 216                slave_mask |= (1 << (irq&7));
 217                eisa_out8(slave_mask, 0xa1);
 218                eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */
 219                eisa_out8(0x62, 0x20);  /* 'Specific EOI' to master-IRQ2 */
 220
 221        } else {
 222                master_mask |= (1 << (irq&7));
 223                eisa_out8(master_mask, 0x21);
 224                eisa_out8(0x60|irq, 0x20);      /* 'Specific EOI' to master */
 225        }
 226        spin_unlock_irqrestore(&eisa_irq_lock, flags);
 227
 228        generic_handle_irq(irq);
 229
 230        spin_lock_irqsave(&eisa_irq_lock, flags);
 231        /* unmask */
 232        if (irq & 8) {
 233                slave_mask &= ~(1 << (irq&7));
 234                eisa_out8(slave_mask, 0xa1);
 235        } else {
 236                master_mask &= ~(1 << (irq&7));
 237                eisa_out8(master_mask, 0x21);
 238        }
 239        spin_unlock_irqrestore(&eisa_irq_lock, flags);
 240        return IRQ_HANDLED;
 241}
 242
 243static irqreturn_t dummy_irq2_handler(int _, void *dev)
 244{
 245        printk(KERN_ALERT "eisa: uhh, irq2?\n");
 246        return IRQ_HANDLED;
 247}
 248
 249static struct irqaction irq2_action = {
 250        .handler = dummy_irq2_handler,
 251        .name = "cascade",
 252};
 253
 254static void init_eisa_pic(void)
 255{
 256        unsigned long flags;
 257
 258        spin_lock_irqsave(&eisa_irq_lock, flags);
 259
 260        eisa_out8(0xff, 0x21); /* mask during init */
 261        eisa_out8(0xff, 0xa1); /* mask during init */
 262
 263        /* master pic */
 264        eisa_out8(0x11, 0x20); /* ICW1 */
 265        eisa_out8(0x00, 0x21); /* ICW2 */
 266        eisa_out8(0x04, 0x21); /* ICW3 */
 267        eisa_out8(0x01, 0x21); /* ICW4 */
 268        eisa_out8(0x40, 0x20); /* OCW2 */
 269
 270        /* slave pic */
 271        eisa_out8(0x11, 0xa0); /* ICW1 */
 272        eisa_out8(0x08, 0xa1); /* ICW2 */
 273        eisa_out8(0x02, 0xa1); /* ICW3 */
 274        eisa_out8(0x01, 0xa1); /* ICW4 */
 275        eisa_out8(0x40, 0xa0); /* OCW2 */
 276
 277        udelay(100);
 278
 279        slave_mask = 0xff;
 280        master_mask = 0xfb;
 281        eisa_out8(slave_mask, 0xa1); /* OCW1 */
 282        eisa_out8(master_mask, 0x21); /* OCW1 */
 283
 284        /* setup trig level */
 285        EISA_DBG("EISA edge/level %04x\n", eisa_irq_level);
 286
 287        eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge  */
 288        eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1);
 289
 290        EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
 291        EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
 292        EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0));
 293        EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1));
 294
 295        spin_unlock_irqrestore(&eisa_irq_lock, flags);
 296}
 297
 298/* Device initialisation */
 299
 300#define is_mongoose(dev) (dev->id.sversion == 0x00076)
 301
 302static int __init eisa_probe(struct parisc_device *dev)
 303{
 304        int i, result;
 305
 306        char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
 307
 308        printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
 309                name, (unsigned long)dev->hpa.start);
 310
 311        eisa_dev.hba.dev = dev;
 312        eisa_dev.hba.iommu = ccio_get_iommu(dev);
 313
 314        eisa_dev.hba.lmmio_space.name = "EISA";
 315        eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000);
 316        eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff);
 317        eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM;
 318        result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space);
 319        if (result < 0) {
 320                printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n");
 321                return result;
 322        }
 323        eisa_dev.hba.io_space.name = "EISA";
 324        eisa_dev.hba.io_space.start = 0;
 325        eisa_dev.hba.io_space.end = 0xffff;
 326        eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO;
 327        result = request_resource(&ioport_resource, &eisa_dev.hba.io_space);
 328        if (result < 0) {
 329                printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n");
 330                return result;
 331        }
 332        pcibios_register_hba(&eisa_dev.hba);
 333
 334        result = request_irq(dev->irq, eisa_irq, IRQF_SHARED, "EISA", &eisa_dev);
 335        if (result) {
 336                printk(KERN_ERR "EISA: request_irq failed!\n");
 337                goto error_release;
 338        }
 339
 340        /* Reserve IRQ2 */
 341        setup_irq(2, &irq2_action);
 342        for (i = 0; i < 16; i++) {
 343                irq_set_chip_and_handler(i, &eisa_interrupt_type,
 344                                         handle_simple_irq);
 345        }
 346
 347        EISA_bus = 1;
 348
 349        if (dev->num_addrs) {
 350                /* newer firmware hand out the eeprom address */
 351                eisa_dev.eeprom_addr = dev->addr[0];
 352        } else {
 353                /* old firmware, need to figure out the box */
 354                if (is_mongoose(dev)) {
 355                        eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR;
 356                } else {
 357                        eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
 358                }
 359        }
 360        eisa_eeprom_addr = ioremap_nocache(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
 361        if (!eisa_eeprom_addr) {
 362                result = -ENOMEM;
 363                printk(KERN_ERR "EISA: ioremap_nocache failed!\n");
 364                goto error_free_irq;
 365        }
 366        result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
 367                        &eisa_dev.hba.lmmio_space);
 368        init_eisa_pic();
 369
 370        if (result >= 0) {
 371                /* FIXME : Don't enumerate the bus twice. */
 372                eisa_dev.root.dev = &dev->dev;
 373                dev_set_drvdata(&dev->dev, &eisa_dev.root);
 374                eisa_dev.root.bus_base_addr = 0;
 375                eisa_dev.root.res = &eisa_dev.hba.io_space;
 376                eisa_dev.root.slots = result;
 377                eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */
 378                if (eisa_root_register (&eisa_dev.root)) {
 379                        printk(KERN_ERR "EISA: Failed to register EISA root\n");
 380                        result = -ENOMEM;
 381                        goto error_iounmap;
 382                }
 383        }
 384
 385        return 0;
 386
 387error_iounmap:
 388        iounmap(eisa_eeprom_addr);
 389error_free_irq:
 390        free_irq(dev->irq, &eisa_dev);
 391error_release:
 392        release_resource(&eisa_dev.hba.io_space);
 393        return result;
 394}
 395
 396static const struct parisc_device_id eisa_tbl[] __initconst = {
 397        { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */
 398        { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */
 399        { 0, }
 400};
 401
 402MODULE_DEVICE_TABLE(parisc, eisa_tbl);
 403
 404static struct parisc_driver eisa_driver __refdata = {
 405        .name =         "eisa_ba",
 406        .id_table =     eisa_tbl,
 407        .probe =        eisa_probe,
 408};
 409
 410void __init eisa_init(void)
 411{
 412        register_parisc_driver(&eisa_driver);
 413}
 414
 415
 416static unsigned int eisa_irq_configured;
 417void eisa_make_irq_level(int num)
 418{
 419        if (eisa_irq_configured& (1<<num)) {
 420                printk(KERN_WARNING
 421                       "IRQ %d polarity configured twice (last to level)\n",
 422                       num);
 423        }
 424        eisa_irq_level |= (1<<num); /* set the corresponding bit */
 425        eisa_irq_configured |= (1<<num); /* set the corresponding bit */
 426}
 427
 428void eisa_make_irq_edge(int num)
 429{
 430        if (eisa_irq_configured& (1<<num)) {
 431                printk(KERN_WARNING
 432                       "IRQ %d polarity configured twice (last to edge)\n",
 433                       num);
 434        }
 435        eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */
 436        eisa_irq_configured |= (1<<num); /* set the corresponding bit */
 437}
 438
 439static int __init eisa_irq_setup(char *str)
 440{
 441        char *cur = str;
 442        int val;
 443
 444        EISA_DBG("IRQ setup\n");
 445        while (cur != NULL) {
 446                char *pe;
 447
 448                val = (int) simple_strtoul(cur, &pe, 0);
 449                if (val > 15 || val < 0) {
 450                        printk(KERN_ERR "eisa: EISA irq value are 0-15\n");
 451                        continue;
 452                }
 453                if (val == 2) {
 454                        val = 9;
 455                }
 456                eisa_make_irq_edge(val); /* clear the corresponding bit */
 457                EISA_DBG("setting IRQ %d to edge-triggered mode\n", val);
 458
 459                if ((cur = strchr(cur, ','))) {
 460                        cur++;
 461                } else {
 462                        break;
 463                }
 464        }
 465        return 1;
 466}
 467
 468__setup("eisa_irq_edge=", eisa_irq_setup);
 469
 470