linux/drivers/atm/fore200e.c
<<
>>
Prefs
   1/*
   2  A FORE Systems 200E-series driver for ATM on Linux.
   3  Christophe Lizzi (lizzi@cnam.fr), October 1999-March 2003.
   4
   5  Based on the PCA-200E driver from Uwe Dannowski (Uwe.Dannowski@inf.tu-dresden.de).
   6
   7  This driver simultaneously supports PCA-200E and SBA-200E adapters
   8  on i386, alpha (untested), powerpc, sparc and sparc64 architectures.
   9
  10  This program is free software; you can redistribute it and/or modify
  11  it under the terms of the GNU General Public License as published by
  12  the Free Software Foundation; either version 2 of the License, or
  13  (at your option) any later version.
  14
  15  This program is distributed in the hope that it will be useful,
  16  but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  GNU General Public License for more details.
  19
  20  You should have received a copy of the GNU General Public License
  21  along with this program; if not, write to the Free Software
  22  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  23*/
  24
  25
  26#include <linux/kernel.h>
  27#include <linux/slab.h>
  28#include <linux/init.h>
  29#include <linux/capability.h>
  30#include <linux/interrupt.h>
  31#include <linux/bitops.h>
  32#include <linux/pci.h>
  33#include <linux/module.h>
  34#include <linux/atmdev.h>
  35#include <linux/sonet.h>
  36#include <linux/atm_suni.h>
  37#include <linux/dma-mapping.h>
  38#include <linux/delay.h>
  39#include <linux/firmware.h>
  40#include <asm/io.h>
  41#include <asm/string.h>
  42#include <asm/page.h>
  43#include <asm/irq.h>
  44#include <asm/dma.h>
  45#include <asm/byteorder.h>
  46#include <asm/uaccess.h>
  47#include <linux/atomic.h>
  48
  49#ifdef CONFIG_SBUS
  50#include <linux/of.h>
  51#include <linux/of_device.h>
  52#include <asm/idprom.h>
  53#include <asm/openprom.h>
  54#include <asm/oplib.h>
  55#include <asm/pgtable.h>
  56#endif
  57
  58#if defined(CONFIG_ATM_FORE200E_USE_TASKLET) /* defer interrupt work to a tasklet */
  59#define FORE200E_USE_TASKLET
  60#endif
  61
  62#if 0 /* enable the debugging code of the buffer supply queues */
  63#define FORE200E_BSQ_DEBUG
  64#endif
  65
  66#if 1 /* ensure correct handling of 52-byte AAL0 SDUs expected by atmdump-like apps */
  67#define FORE200E_52BYTE_AAL0_SDU
  68#endif
  69
  70#include "fore200e.h"
  71#include "suni.h"
  72
  73#define FORE200E_VERSION "0.3e"
  74
  75#define FORE200E         "fore200e: "
  76
  77#if 0 /* override .config */
  78#define CONFIG_ATM_FORE200E_DEBUG 1
  79#endif
  80#if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG > 0)
  81#define DPRINTK(level, format, args...)  do { if (CONFIG_ATM_FORE200E_DEBUG >= (level)) \
  82                                                  printk(FORE200E format, ##args); } while (0)
  83#else
  84#define DPRINTK(level, format, args...)  do {} while (0)
  85#endif
  86
  87
  88#define FORE200E_ALIGN(addr, alignment) \
  89        ((((unsigned long)(addr) + (alignment - 1)) & ~(alignment - 1)) - (unsigned long)(addr))
  90
  91#define FORE200E_DMA_INDEX(dma_addr, type, index)  ((dma_addr) + (index) * sizeof(type))
  92
  93#define FORE200E_INDEX(virt_addr, type, index)     (&((type *)(virt_addr))[ index ])
  94
  95#define FORE200E_NEXT_ENTRY(index, modulo)         (index = ((index) + 1) % (modulo))
  96
  97#if 1
  98#define ASSERT(expr)     if (!(expr)) { \
  99                             printk(FORE200E "assertion failed! %s[%d]: %s\n", \
 100                                    __func__, __LINE__, #expr); \
 101                             panic(FORE200E "%s", __func__); \
 102                         }
 103#else
 104#define ASSERT(expr)     do {} while (0)
 105#endif
 106
 107
 108static const struct atmdev_ops   fore200e_ops;
 109static const struct fore200e_bus fore200e_bus[];
 110
 111static LIST_HEAD(fore200e_boards);
 112
 113
 114MODULE_AUTHOR("Christophe Lizzi - credits to Uwe Dannowski and Heikki Vatiainen");
 115MODULE_DESCRIPTION("FORE Systems 200E-series ATM driver - version " FORE200E_VERSION);
 116MODULE_SUPPORTED_DEVICE("PCA-200E, SBA-200E");
 117
 118
 119static const int fore200e_rx_buf_nbr[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ] = {
 120    { BUFFER_S1_NBR, BUFFER_L1_NBR },
 121    { BUFFER_S2_NBR, BUFFER_L2_NBR }
 122};
 123
 124static const int fore200e_rx_buf_size[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ] = {
 125    { BUFFER_S1_SIZE, BUFFER_L1_SIZE },
 126    { BUFFER_S2_SIZE, BUFFER_L2_SIZE }
 127};
 128
 129
 130#if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG > 0)
 131static const char* fore200e_traffic_class[] = { "NONE", "UBR", "CBR", "VBR", "ABR", "ANY" };
 132#endif
 133
 134
 135#if 0 /* currently unused */
 136static int 
 137fore200e_fore2atm_aal(enum fore200e_aal aal)
 138{
 139    switch(aal) {
 140    case FORE200E_AAL0:  return ATM_AAL0;
 141    case FORE200E_AAL34: return ATM_AAL34;
 142    case FORE200E_AAL5:  return ATM_AAL5;
 143    }
 144
 145    return -EINVAL;
 146}
 147#endif
 148
 149
 150static enum fore200e_aal
 151fore200e_atm2fore_aal(int aal)
 152{
 153    switch(aal) {
 154    case ATM_AAL0:  return FORE200E_AAL0;
 155    case ATM_AAL34: return FORE200E_AAL34;
 156    case ATM_AAL1:
 157    case ATM_AAL2:
 158    case ATM_AAL5:  return FORE200E_AAL5;
 159    }
 160
 161    return -EINVAL;
 162}
 163
 164
 165static char*
 166fore200e_irq_itoa(int irq)
 167{
 168    static char str[8];
 169    sprintf(str, "%d", irq);
 170    return str;
 171}
 172
 173
 174/* allocate and align a chunk of memory intended to hold the data behing exchanged
 175   between the driver and the adapter (using streaming DVMA) */
 176
 177static int
 178fore200e_chunk_alloc(struct fore200e* fore200e, struct chunk* chunk, int size, int alignment, int direction)
 179{
 180    unsigned long offset = 0;
 181
 182    if (alignment <= sizeof(int))
 183        alignment = 0;
 184
 185    chunk->alloc_size = size + alignment;
 186    chunk->align_size = size;
 187    chunk->direction  = direction;
 188
 189    chunk->alloc_addr = kzalloc(chunk->alloc_size, GFP_KERNEL | GFP_DMA);
 190    if (chunk->alloc_addr == NULL)
 191        return -ENOMEM;
 192
 193    if (alignment > 0)
 194        offset = FORE200E_ALIGN(chunk->alloc_addr, alignment); 
 195    
 196    chunk->align_addr = chunk->alloc_addr + offset;
 197
 198    chunk->dma_addr = fore200e->bus->dma_map(fore200e, chunk->align_addr, chunk->align_size, direction);
 199    
 200    return 0;
 201}
 202
 203
 204/* free a chunk of memory */
 205
 206static void
 207fore200e_chunk_free(struct fore200e* fore200e, struct chunk* chunk)
 208{
 209    fore200e->bus->dma_unmap(fore200e, chunk->dma_addr, chunk->dma_size, chunk->direction);
 210
 211    kfree(chunk->alloc_addr);
 212}
 213
 214
 215static void
 216fore200e_spin(int msecs)
 217{
 218    unsigned long timeout = jiffies + msecs_to_jiffies(msecs);
 219    while (time_before(jiffies, timeout));
 220}
 221
 222
 223static int
 224fore200e_poll(struct fore200e* fore200e, volatile u32* addr, u32 val, int msecs)
 225{
 226    unsigned long timeout = jiffies + msecs_to_jiffies(msecs);
 227    int           ok;
 228
 229    mb();
 230    do {
 231        if ((ok = (*addr == val)) || (*addr & STATUS_ERROR))
 232            break;
 233
 234    } while (time_before(jiffies, timeout));
 235
 236#if 1
 237    if (!ok) {
 238        printk(FORE200E "cmd polling failed, got status 0x%08x, expected 0x%08x\n",
 239               *addr, val);
 240    }
 241#endif
 242
 243    return ok;
 244}
 245
 246
 247static int
 248fore200e_io_poll(struct fore200e* fore200e, volatile u32 __iomem *addr, u32 val, int msecs)
 249{
 250    unsigned long timeout = jiffies + msecs_to_jiffies(msecs);
 251    int           ok;
 252
 253    do {
 254        if ((ok = (fore200e->bus->read(addr) == val)))
 255            break;
 256
 257    } while (time_before(jiffies, timeout));
 258
 259#if 1
 260    if (!ok) {
 261        printk(FORE200E "I/O polling failed, got status 0x%08x, expected 0x%08x\n",
 262               fore200e->bus->read(addr), val);
 263    }
 264#endif
 265
 266    return ok;
 267}
 268
 269
 270static void
 271fore200e_free_rx_buf(struct fore200e* fore200e)
 272{
 273    int scheme, magn, nbr;
 274    struct buffer* buffer;
 275
 276    for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) {
 277        for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) {
 278
 279            if ((buffer = fore200e->host_bsq[ scheme ][ magn ].buffer) != NULL) {
 280
 281                for (nbr = 0; nbr < fore200e_rx_buf_nbr[ scheme ][ magn ]; nbr++) {
 282
 283                    struct chunk* data = &buffer[ nbr ].data;
 284
 285                    if (data->alloc_addr != NULL)
 286                        fore200e_chunk_free(fore200e, data);
 287                }
 288            }
 289        }
 290    }
 291}
 292
 293
 294static void
 295fore200e_uninit_bs_queue(struct fore200e* fore200e)
 296{
 297    int scheme, magn;
 298    
 299    for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) {
 300        for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) {
 301
 302            struct chunk* status    = &fore200e->host_bsq[ scheme ][ magn ].status;
 303            struct chunk* rbd_block = &fore200e->host_bsq[ scheme ][ magn ].rbd_block;
 304            
 305            if (status->alloc_addr)
 306                fore200e->bus->dma_chunk_free(fore200e, status);
 307            
 308            if (rbd_block->alloc_addr)
 309                fore200e->bus->dma_chunk_free(fore200e, rbd_block);
 310        }
 311    }
 312}
 313
 314
 315static int
 316fore200e_reset(struct fore200e* fore200e, int diag)
 317{
 318    int ok;
 319
 320    fore200e->cp_monitor = fore200e->virt_base + FORE200E_CP_MONITOR_OFFSET;
 321    
 322    fore200e->bus->write(BSTAT_COLD_START, &fore200e->cp_monitor->bstat);
 323
 324    fore200e->bus->reset(fore200e);
 325
 326    if (diag) {
 327        ok = fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_SELFTEST_OK, 1000);
 328        if (ok == 0) {
 329            
 330            printk(FORE200E "device %s self-test failed\n", fore200e->name);
 331            return -ENODEV;
 332        }
 333
 334        printk(FORE200E "device %s self-test passed\n", fore200e->name);
 335        
 336        fore200e->state = FORE200E_STATE_RESET;
 337    }
 338
 339    return 0;
 340}
 341
 342
 343static void
 344fore200e_shutdown(struct fore200e* fore200e)
 345{
 346    printk(FORE200E "removing device %s at 0x%lx, IRQ %s\n",
 347           fore200e->name, fore200e->phys_base, 
 348           fore200e_irq_itoa(fore200e->irq));
 349    
 350    if (fore200e->state > FORE200E_STATE_RESET) {
 351        /* first, reset the board to prevent further interrupts or data transfers */
 352        fore200e_reset(fore200e, 0);
 353    }
 354    
 355    /* then, release all allocated resources */
 356    switch(fore200e->state) {
 357
 358    case FORE200E_STATE_COMPLETE:
 359        kfree(fore200e->stats);
 360
 361    case FORE200E_STATE_IRQ:
 362        free_irq(fore200e->irq, fore200e->atm_dev);
 363
 364    case FORE200E_STATE_ALLOC_BUF:
 365        fore200e_free_rx_buf(fore200e);
 366
 367    case FORE200E_STATE_INIT_BSQ:
 368        fore200e_uninit_bs_queue(fore200e);
 369
 370    case FORE200E_STATE_INIT_RXQ:
 371        fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_rxq.status);
 372        fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_rxq.rpd);
 373
 374    case FORE200E_STATE_INIT_TXQ:
 375        fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_txq.status);
 376        fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_txq.tpd);
 377
 378    case FORE200E_STATE_INIT_CMDQ:
 379        fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_cmdq.status);
 380
 381    case FORE200E_STATE_INITIALIZE:
 382        /* nothing to do for that state */
 383
 384    case FORE200E_STATE_START_FW:
 385        /* nothing to do for that state */
 386
 387    case FORE200E_STATE_RESET:
 388        /* nothing to do for that state */
 389
 390    case FORE200E_STATE_MAP:
 391        fore200e->bus->unmap(fore200e);
 392
 393    case FORE200E_STATE_CONFIGURE:
 394        /* nothing to do for that state */
 395
 396    case FORE200E_STATE_REGISTER:
 397        /* XXX shouldn't we *start* by deregistering the device? */
 398        atm_dev_deregister(fore200e->atm_dev);
 399
 400    case FORE200E_STATE_BLANK:
 401        /* nothing to do for that state */
 402        break;
 403    }
 404}
 405
 406
 407#ifdef CONFIG_PCI
 408
 409static u32 fore200e_pca_read(volatile u32 __iomem *addr)
 410{
 411    /* on big-endian hosts, the board is configured to convert
 412       the endianess of slave RAM accesses  */
 413    return le32_to_cpu(readl(addr));
 414}
 415
 416
 417static void fore200e_pca_write(u32 val, volatile u32 __iomem *addr)
 418{
 419    /* on big-endian hosts, the board is configured to convert
 420       the endianess of slave RAM accesses  */
 421    writel(cpu_to_le32(val), addr);
 422}
 423
 424
 425static u32
 426fore200e_pca_dma_map(struct fore200e* fore200e, void* virt_addr, int size, int direction)
 427{
 428    u32 dma_addr = dma_map_single(&((struct pci_dev *) fore200e->bus_dev)->dev, virt_addr, size, direction);
 429
 430    DPRINTK(3, "PCI DVMA mapping: virt_addr = 0x%p, size = %d, direction = %d,  --> dma_addr = 0x%08x\n",
 431            virt_addr, size, direction, dma_addr);
 432    
 433    return dma_addr;
 434}
 435
 436
 437static void
 438fore200e_pca_dma_unmap(struct fore200e* fore200e, u32 dma_addr, int size, int direction)
 439{
 440    DPRINTK(3, "PCI DVMA unmapping: dma_addr = 0x%08x, size = %d, direction = %d\n",
 441            dma_addr, size, direction);
 442
 443    dma_unmap_single(&((struct pci_dev *) fore200e->bus_dev)->dev, dma_addr, size, direction);
 444}
 445
 446
 447static void
 448fore200e_pca_dma_sync_for_cpu(struct fore200e* fore200e, u32 dma_addr, int size, int direction)
 449{
 450    DPRINTK(3, "PCI DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction);
 451
 452    dma_sync_single_for_cpu(&((struct pci_dev *) fore200e->bus_dev)->dev, dma_addr, size, direction);
 453}
 454
 455static void
 456fore200e_pca_dma_sync_for_device(struct fore200e* fore200e, u32 dma_addr, int size, int direction)
 457{
 458    DPRINTK(3, "PCI DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction);
 459
 460    dma_sync_single_for_device(&((struct pci_dev *) fore200e->bus_dev)->dev, dma_addr, size, direction);
 461}
 462
 463
 464/* allocate a DMA consistent chunk of memory intended to act as a communication mechanism
 465   (to hold descriptors, status, queues, etc.) shared by the driver and the adapter */
 466
 467static int
 468fore200e_pca_dma_chunk_alloc(struct fore200e* fore200e, struct chunk* chunk,
 469                             int size, int nbr, int alignment)
 470{
 471    /* returned chunks are page-aligned */
 472    chunk->alloc_size = size * nbr;
 473    chunk->alloc_addr = dma_alloc_coherent(&((struct pci_dev *) fore200e->bus_dev)->dev,
 474                                           chunk->alloc_size,
 475                                           &chunk->dma_addr,
 476                                           GFP_KERNEL);
 477    
 478    if ((chunk->alloc_addr == NULL) || (chunk->dma_addr == 0))
 479        return -ENOMEM;
 480
 481    chunk->align_addr = chunk->alloc_addr;
 482    
 483    return 0;
 484}
 485
 486
 487/* free a DMA consistent chunk of memory */
 488
 489static void
 490fore200e_pca_dma_chunk_free(struct fore200e* fore200e, struct chunk* chunk)
 491{
 492    dma_free_coherent(&((struct pci_dev *) fore200e->bus_dev)->dev,
 493                        chunk->alloc_size,
 494                        chunk->alloc_addr,
 495                        chunk->dma_addr);
 496}
 497
 498
 499static int
 500fore200e_pca_irq_check(struct fore200e* fore200e)
 501{
 502    /* this is a 1 bit register */
 503    int irq_posted = readl(fore200e->regs.pca.psr);
 504
 505#if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG == 2)
 506    if (irq_posted && (readl(fore200e->regs.pca.hcr) & PCA200E_HCR_OUTFULL)) {
 507        DPRINTK(2,"FIFO OUT full, device %d\n", fore200e->atm_dev->number);
 508    }
 509#endif
 510
 511    return irq_posted;
 512}
 513
 514
 515static void
 516fore200e_pca_irq_ack(struct fore200e* fore200e)
 517{
 518    writel(PCA200E_HCR_CLRINTR, fore200e->regs.pca.hcr);
 519}
 520
 521
 522static void
 523fore200e_pca_reset(struct fore200e* fore200e)
 524{
 525    writel(PCA200E_HCR_RESET, fore200e->regs.pca.hcr);
 526    fore200e_spin(10);
 527    writel(0, fore200e->regs.pca.hcr);
 528}
 529
 530
 531static int fore200e_pca_map(struct fore200e* fore200e)
 532{
 533    DPRINTK(2, "device %s being mapped in memory\n", fore200e->name);
 534
 535    fore200e->virt_base = ioremap(fore200e->phys_base, PCA200E_IOSPACE_LENGTH);
 536    
 537    if (fore200e->virt_base == NULL) {
 538        printk(FORE200E "can't map device %s\n", fore200e->name);
 539        return -EFAULT;
 540    }
 541
 542    DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base);
 543
 544    /* gain access to the PCA specific registers  */
 545    fore200e->regs.pca.hcr = fore200e->virt_base + PCA200E_HCR_OFFSET;
 546    fore200e->regs.pca.imr = fore200e->virt_base + PCA200E_IMR_OFFSET;
 547    fore200e->regs.pca.psr = fore200e->virt_base + PCA200E_PSR_OFFSET;
 548
 549    fore200e->state = FORE200E_STATE_MAP;
 550    return 0;
 551}
 552
 553
 554static void
 555fore200e_pca_unmap(struct fore200e* fore200e)
 556{
 557    DPRINTK(2, "device %s being unmapped from memory\n", fore200e->name);
 558
 559    if (fore200e->virt_base != NULL)
 560        iounmap(fore200e->virt_base);
 561}
 562
 563
 564static int fore200e_pca_configure(struct fore200e *fore200e)
 565{
 566    struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev;
 567    u8              master_ctrl, latency;
 568
 569    DPRINTK(2, "device %s being configured\n", fore200e->name);
 570
 571    if ((pci_dev->irq == 0) || (pci_dev->irq == 0xFF)) {
 572        printk(FORE200E "incorrect IRQ setting - misconfigured PCI-PCI bridge?\n");
 573        return -EIO;
 574    }
 575
 576    pci_read_config_byte(pci_dev, PCA200E_PCI_MASTER_CTRL, &master_ctrl);
 577
 578    master_ctrl = master_ctrl
 579#if defined(__BIG_ENDIAN)
 580        /* request the PCA board to convert the endianess of slave RAM accesses */
 581        | PCA200E_CTRL_CONVERT_ENDIAN
 582#endif
 583#if 0
 584        | PCA200E_CTRL_DIS_CACHE_RD
 585        | PCA200E_CTRL_DIS_WRT_INVAL
 586        | PCA200E_CTRL_ENA_CONT_REQ_MODE
 587        | PCA200E_CTRL_2_CACHE_WRT_INVAL
 588#endif
 589        | PCA200E_CTRL_LARGE_PCI_BURSTS;
 590    
 591    pci_write_config_byte(pci_dev, PCA200E_PCI_MASTER_CTRL, master_ctrl);
 592
 593    /* raise latency from 32 (default) to 192, as this seems to prevent NIC
 594       lockups (under heavy rx loads) due to continuous 'FIFO OUT full' condition.
 595       this may impact the performances of other PCI devices on the same bus, though */
 596    latency = 192;
 597    pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency);
 598
 599    fore200e->state = FORE200E_STATE_CONFIGURE;
 600    return 0;
 601}
 602
 603
 604static int __init
 605fore200e_pca_prom_read(struct fore200e* fore200e, struct prom_data* prom)
 606{
 607    struct host_cmdq*       cmdq  = &fore200e->host_cmdq;
 608    struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ];
 609    struct prom_opcode      opcode;
 610    int                     ok;
 611    u32                     prom_dma;
 612
 613    FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD);
 614
 615    opcode.opcode = OPCODE_GET_PROM;
 616    opcode.pad    = 0;
 617
 618    prom_dma = fore200e->bus->dma_map(fore200e, prom, sizeof(struct prom_data), DMA_FROM_DEVICE);
 619
 620    fore200e->bus->write(prom_dma, &entry->cp_entry->cmd.prom_block.prom_haddr);
 621    
 622    *entry->status = STATUS_PENDING;
 623
 624    fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.prom_block.opcode);
 625
 626    ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400);
 627
 628    *entry->status = STATUS_FREE;
 629
 630    fore200e->bus->dma_unmap(fore200e, prom_dma, sizeof(struct prom_data), DMA_FROM_DEVICE);
 631
 632    if (ok == 0) {
 633        printk(FORE200E "unable to get PROM data from device %s\n", fore200e->name);
 634        return -EIO;
 635    }
 636
 637#if defined(__BIG_ENDIAN)
 638    
 639#define swap_here(addr) (*((u32*)(addr)) = swab32( *((u32*)(addr)) ))
 640
 641    /* MAC address is stored as little-endian */
 642    swap_here(&prom->mac_addr[0]);
 643    swap_here(&prom->mac_addr[4]);
 644#endif
 645    
 646    return 0;
 647}
 648
 649
 650static int
 651fore200e_pca_proc_read(struct fore200e* fore200e, char *page)
 652{
 653    struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev;
 654
 655    return sprintf(page, "   PCI bus/slot/function:\t%d/%d/%d\n",
 656                   pci_dev->bus->number, PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn));
 657}
 658
 659#endif /* CONFIG_PCI */
 660
 661
 662#ifdef CONFIG_SBUS
 663
 664static u32 fore200e_sba_read(volatile u32 __iomem *addr)
 665{
 666    return sbus_readl(addr);
 667}
 668
 669static void fore200e_sba_write(u32 val, volatile u32 __iomem *addr)
 670{
 671    sbus_writel(val, addr);
 672}
 673
 674static u32 fore200e_sba_dma_map(struct fore200e *fore200e, void* virt_addr, int size, int direction)
 675{
 676        struct platform_device *op = fore200e->bus_dev;
 677        u32 dma_addr;
 678
 679        dma_addr = dma_map_single(&op->dev, virt_addr, size, direction);
 680
 681        DPRINTK(3, "SBUS DVMA mapping: virt_addr = 0x%p, size = %d, direction = %d --> dma_addr = 0x%08x\n",
 682                virt_addr, size, direction, dma_addr);
 683    
 684        return dma_addr;
 685}
 686
 687static void fore200e_sba_dma_unmap(struct fore200e *fore200e, u32 dma_addr, int size, int direction)
 688{
 689        struct platform_device *op = fore200e->bus_dev;
 690
 691        DPRINTK(3, "SBUS DVMA unmapping: dma_addr = 0x%08x, size = %d, direction = %d,\n",
 692                dma_addr, size, direction);
 693
 694        dma_unmap_single(&op->dev, dma_addr, size, direction);
 695}
 696
 697static void fore200e_sba_dma_sync_for_cpu(struct fore200e *fore200e, u32 dma_addr, int size, int direction)
 698{
 699        struct platform_device *op = fore200e->bus_dev;
 700
 701        DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction);
 702    
 703        dma_sync_single_for_cpu(&op->dev, dma_addr, size, direction);
 704}
 705
 706static void fore200e_sba_dma_sync_for_device(struct fore200e *fore200e, u32 dma_addr, int size, int direction)
 707{
 708        struct platform_device *op = fore200e->bus_dev;
 709
 710        DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction);
 711
 712        dma_sync_single_for_device(&op->dev, dma_addr, size, direction);
 713}
 714
 715/* Allocate a DVMA consistent chunk of memory intended to act as a communication mechanism
 716 * (to hold descriptors, status, queues, etc.) shared by the driver and the adapter.
 717 */
 718static int fore200e_sba_dma_chunk_alloc(struct fore200e *fore200e, struct chunk *chunk,
 719                                        int size, int nbr, int alignment)
 720{
 721        struct platform_device *op = fore200e->bus_dev;
 722
 723        chunk->alloc_size = chunk->align_size = size * nbr;
 724
 725        /* returned chunks are page-aligned */
 726        chunk->alloc_addr = dma_alloc_coherent(&op->dev, chunk->alloc_size,
 727                                               &chunk->dma_addr, GFP_ATOMIC);
 728
 729        if ((chunk->alloc_addr == NULL) || (chunk->dma_addr == 0))
 730                return -ENOMEM;
 731
 732        chunk->align_addr = chunk->alloc_addr;
 733    
 734        return 0;
 735}
 736
 737/* free a DVMA consistent chunk of memory */
 738static void fore200e_sba_dma_chunk_free(struct fore200e *fore200e, struct chunk *chunk)
 739{
 740        struct platform_device *op = fore200e->bus_dev;
 741
 742        dma_free_coherent(&op->dev, chunk->alloc_size,
 743                          chunk->alloc_addr, chunk->dma_addr);
 744}
 745
 746static void fore200e_sba_irq_enable(struct fore200e *fore200e)
 747{
 748        u32 hcr = fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_STICKY;
 749        fore200e->bus->write(hcr | SBA200E_HCR_INTR_ENA, fore200e->regs.sba.hcr);
 750}
 751
 752static int fore200e_sba_irq_check(struct fore200e *fore200e)
 753{
 754        return fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_INTR_REQ;
 755}
 756
 757static void fore200e_sba_irq_ack(struct fore200e *fore200e)
 758{
 759        u32 hcr = fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_STICKY;
 760        fore200e->bus->write(hcr | SBA200E_HCR_INTR_CLR, fore200e->regs.sba.hcr);
 761}
 762
 763static void fore200e_sba_reset(struct fore200e *fore200e)
 764{
 765        fore200e->bus->write(SBA200E_HCR_RESET, fore200e->regs.sba.hcr);
 766        fore200e_spin(10);
 767        fore200e->bus->write(0, fore200e->regs.sba.hcr);
 768}
 769
 770static int __init fore200e_sba_map(struct fore200e *fore200e)
 771{
 772        struct platform_device *op = fore200e->bus_dev;
 773        unsigned int bursts;
 774
 775        /* gain access to the SBA specific registers  */
 776        fore200e->regs.sba.hcr = of_ioremap(&op->resource[0], 0, SBA200E_HCR_LENGTH, "SBA HCR");
 777        fore200e->regs.sba.bsr = of_ioremap(&op->resource[1], 0, SBA200E_BSR_LENGTH, "SBA BSR");
 778        fore200e->regs.sba.isr = of_ioremap(&op->resource[2], 0, SBA200E_ISR_LENGTH, "SBA ISR");
 779        fore200e->virt_base    = of_ioremap(&op->resource[3], 0, SBA200E_RAM_LENGTH, "SBA RAM");
 780
 781        if (!fore200e->virt_base) {
 782                printk(FORE200E "unable to map RAM of device %s\n", fore200e->name);
 783                return -EFAULT;
 784        }
 785
 786        DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base);
 787    
 788        fore200e->bus->write(0x02, fore200e->regs.sba.isr); /* XXX hardwired interrupt level */
 789
 790        /* get the supported DVMA burst sizes */
 791        bursts = of_getintprop_default(op->dev.of_node->parent, "burst-sizes", 0x00);
 792
 793        if (sbus_can_dma_64bit())
 794                sbus_set_sbus64(&op->dev, bursts);
 795
 796        fore200e->state = FORE200E_STATE_MAP;
 797        return 0;
 798}
 799
 800static void fore200e_sba_unmap(struct fore200e *fore200e)
 801{
 802        struct platform_device *op = fore200e->bus_dev;
 803
 804        of_iounmap(&op->resource[0], fore200e->regs.sba.hcr, SBA200E_HCR_LENGTH);
 805        of_iounmap(&op->resource[1], fore200e->regs.sba.bsr, SBA200E_BSR_LENGTH);
 806        of_iounmap(&op->resource[2], fore200e->regs.sba.isr, SBA200E_ISR_LENGTH);
 807        of_iounmap(&op->resource[3], fore200e->virt_base,    SBA200E_RAM_LENGTH);
 808}
 809
 810static int __init fore200e_sba_configure(struct fore200e *fore200e)
 811{
 812        fore200e->state = FORE200E_STATE_CONFIGURE;
 813        return 0;
 814}
 815
 816static int __init fore200e_sba_prom_read(struct fore200e *fore200e, struct prom_data *prom)
 817{
 818        struct platform_device *op = fore200e->bus_dev;
 819        const u8 *prop;
 820        int len;
 821
 822        prop = of_get_property(op->dev.of_node, "madaddrlo2", &len);
 823        if (!prop)
 824                return -ENODEV;
 825        memcpy(&prom->mac_addr[4], prop, 4);
 826
 827        prop = of_get_property(op->dev.of_node, "madaddrhi4", &len);
 828        if (!prop)
 829                return -ENODEV;
 830        memcpy(&prom->mac_addr[2], prop, 4);
 831
 832        prom->serial_number = of_getintprop_default(op->dev.of_node,
 833                                                    "serialnumber", 0);
 834        prom->hw_revision = of_getintprop_default(op->dev.of_node,
 835                                                  "promversion", 0);
 836    
 837        return 0;
 838}
 839
 840static int fore200e_sba_proc_read(struct fore200e *fore200e, char *page)
 841{
 842        struct platform_device *op = fore200e->bus_dev;
 843        const struct linux_prom_registers *regs;
 844
 845        regs = of_get_property(op->dev.of_node, "reg", NULL);
 846
 847        return sprintf(page, "   SBUS slot/device:\t\t%d/'%s'\n",
 848                       (regs ? regs->which_io : 0), op->dev.of_node->name);
 849}
 850#endif /* CONFIG_SBUS */
 851
 852
 853static void
 854fore200e_tx_irq(struct fore200e* fore200e)
 855{
 856    struct host_txq*        txq = &fore200e->host_txq;
 857    struct host_txq_entry*  entry;
 858    struct atm_vcc*         vcc;
 859    struct fore200e_vc_map* vc_map;
 860
 861    if (fore200e->host_txq.txing == 0)
 862        return;
 863
 864    for (;;) {
 865        
 866        entry = &txq->host_entry[ txq->tail ];
 867
 868        if ((*entry->status & STATUS_COMPLETE) == 0) {
 869            break;
 870        }
 871
 872        DPRINTK(3, "TX COMPLETED: entry = %p [tail = %d], vc_map = %p, skb = %p\n", 
 873                entry, txq->tail, entry->vc_map, entry->skb);
 874
 875        /* free copy of misaligned data */
 876        kfree(entry->data);
 877        
 878        /* remove DMA mapping */
 879        fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length,
 880                                 DMA_TO_DEVICE);
 881
 882        vc_map = entry->vc_map;
 883
 884        /* vcc closed since the time the entry was submitted for tx? */
 885        if ((vc_map->vcc == NULL) ||
 886            (test_bit(ATM_VF_READY, &vc_map->vcc->flags) == 0)) {
 887
 888            DPRINTK(1, "no ready vcc found for PDU sent on device %d\n",
 889                    fore200e->atm_dev->number);
 890
 891            dev_kfree_skb_any(entry->skb);
 892        }
 893        else {
 894            ASSERT(vc_map->vcc);
 895
 896            /* vcc closed then immediately re-opened? */
 897            if (vc_map->incarn != entry->incarn) {
 898
 899                /* when a vcc is closed, some PDUs may be still pending in the tx queue.
 900                   if the same vcc is immediately re-opened, those pending PDUs must
 901                   not be popped after the completion of their emission, as they refer
 902                   to the prior incarnation of that vcc. otherwise, sk_atm(vcc)->sk_wmem_alloc
 903                   would be decremented by the size of the (unrelated) skb, possibly
 904                   leading to a negative sk->sk_wmem_alloc count, ultimately freezing the vcc.
 905                   we thus bind the tx entry to the current incarnation of the vcc
 906                   when the entry is submitted for tx. When the tx later completes,
 907                   if the incarnation number of the tx entry does not match the one
 908                   of the vcc, then this implies that the vcc has been closed then re-opened.
 909                   we thus just drop the skb here. */
 910
 911                DPRINTK(1, "vcc closed-then-re-opened; dropping PDU sent on device %d\n",
 912                        fore200e->atm_dev->number);
 913
 914                dev_kfree_skb_any(entry->skb);
 915            }
 916            else {
 917                vcc = vc_map->vcc;
 918                ASSERT(vcc);
 919
 920                /* notify tx completion */
 921                if (vcc->pop) {
 922                    vcc->pop(vcc, entry->skb);
 923                }
 924                else {
 925                    dev_kfree_skb_any(entry->skb);
 926                }
 927#if 1
 928                /* race fixed by the above incarnation mechanism, but... */
 929                if (atomic_read(&sk_atm(vcc)->sk_wmem_alloc) < 0) {
 930                    atomic_set(&sk_atm(vcc)->sk_wmem_alloc, 0);
 931                }
 932#endif
 933                /* check error condition */
 934                if (*entry->status & STATUS_ERROR)
 935                    atomic_inc(&vcc->stats->tx_err);
 936                else
 937                    atomic_inc(&vcc->stats->tx);
 938            }
 939        }
 940
 941        *entry->status = STATUS_FREE;
 942
 943        fore200e->host_txq.txing--;
 944
 945        FORE200E_NEXT_ENTRY(txq->tail, QUEUE_SIZE_TX);
 946    }
 947}
 948
 949
 950#ifdef FORE200E_BSQ_DEBUG
 951int bsq_audit(int where, struct host_bsq* bsq, int scheme, int magn)
 952{
 953    struct buffer* buffer;
 954    int count = 0;
 955
 956    buffer = bsq->freebuf;
 957    while (buffer) {
 958
 959        if (buffer->supplied) {
 960            printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld supplied but in free list!\n",
 961                   where, scheme, magn, buffer->index);
 962        }
 963
 964        if (buffer->magn != magn) {
 965            printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected magn = %d\n",
 966                   where, scheme, magn, buffer->index, buffer->magn);
 967        }
 968
 969        if (buffer->scheme != scheme) {
 970            printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected scheme = %d\n",
 971                   where, scheme, magn, buffer->index, buffer->scheme);
 972        }
 973
 974        if ((buffer->index < 0) || (buffer->index >= fore200e_rx_buf_nbr[ scheme ][ magn ])) {
 975            printk(FORE200E "bsq_audit(%d): queue %d.%d, out of range buffer index = %ld !\n",
 976                   where, scheme, magn, buffer->index);
 977        }
 978
 979        count++;
 980        buffer = buffer->next;
 981    }
 982
 983    if (count != bsq->freebuf_count) {
 984        printk(FORE200E "bsq_audit(%d): queue %d.%d, %d bufs in free list, but freebuf_count = %d\n",
 985               where, scheme, magn, count, bsq->freebuf_count);
 986    }
 987    return 0;
 988}
 989#endif
 990
 991
 992static void
 993fore200e_supply(struct fore200e* fore200e)
 994{
 995    int  scheme, magn, i;
 996
 997    struct host_bsq*       bsq;
 998    struct host_bsq_entry* entry;
 999    struct buffer*         buffer;
1000
1001    for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) {
1002        for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) {
1003
1004            bsq = &fore200e->host_bsq[ scheme ][ magn ];
1005
1006#ifdef FORE200E_BSQ_DEBUG
1007            bsq_audit(1, bsq, scheme, magn);
1008#endif
1009            while (bsq->freebuf_count >= RBD_BLK_SIZE) {
1010
1011                DPRINTK(2, "supplying %d rx buffers to queue %d / %d, freebuf_count = %d\n",
1012                        RBD_BLK_SIZE, scheme, magn, bsq->freebuf_count);
1013
1014                entry = &bsq->host_entry[ bsq->head ];
1015
1016                for (i = 0; i < RBD_BLK_SIZE; i++) {
1017
1018                    /* take the first buffer in the free buffer list */
1019                    buffer = bsq->freebuf;
1020                    if (!buffer) {
1021                        printk(FORE200E "no more free bufs in queue %d.%d, but freebuf_count = %d\n",
1022                               scheme, magn, bsq->freebuf_count);
1023                        return;
1024                    }
1025                    bsq->freebuf = buffer->next;
1026                    
1027#ifdef FORE200E_BSQ_DEBUG
1028                    if (buffer->supplied)
1029                        printk(FORE200E "queue %d.%d, buffer %lu already supplied\n",
1030                               scheme, magn, buffer->index);
1031                    buffer->supplied = 1;
1032#endif
1033                    entry->rbd_block->rbd[ i ].buffer_haddr = buffer->data.dma_addr;
1034                    entry->rbd_block->rbd[ i ].handle       = FORE200E_BUF2HDL(buffer);
1035                }
1036
1037                FORE200E_NEXT_ENTRY(bsq->head, QUEUE_SIZE_BS);
1038
1039                /* decrease accordingly the number of free rx buffers */
1040                bsq->freebuf_count -= RBD_BLK_SIZE;
1041
1042                *entry->status = STATUS_PENDING;
1043                fore200e->bus->write(entry->rbd_block_dma, &entry->cp_entry->rbd_block_haddr);
1044            }
1045        }
1046    }
1047}
1048
1049
1050static int
1051fore200e_push_rpd(struct fore200e* fore200e, struct atm_vcc* vcc, struct rpd* rpd)
1052{
1053    struct sk_buff*      skb;
1054    struct buffer*       buffer;
1055    struct fore200e_vcc* fore200e_vcc;
1056    int                  i, pdu_len = 0;
1057#ifdef FORE200E_52BYTE_AAL0_SDU
1058    u32                  cell_header = 0;
1059#endif
1060
1061    ASSERT(vcc);
1062    
1063    fore200e_vcc = FORE200E_VCC(vcc);
1064    ASSERT(fore200e_vcc);
1065
1066#ifdef FORE200E_52BYTE_AAL0_SDU
1067    if ((vcc->qos.aal == ATM_AAL0) && (vcc->qos.rxtp.max_sdu == ATM_AAL0_SDU)) {
1068
1069        cell_header = (rpd->atm_header.gfc << ATM_HDR_GFC_SHIFT) |
1070                      (rpd->atm_header.vpi << ATM_HDR_VPI_SHIFT) |
1071                      (rpd->atm_header.vci << ATM_HDR_VCI_SHIFT) |
1072                      (rpd->atm_header.plt << ATM_HDR_PTI_SHIFT) | 
1073                       rpd->atm_header.clp;
1074        pdu_len = 4;
1075    }
1076#endif
1077    
1078    /* compute total PDU length */
1079    for (i = 0; i < rpd->nseg; i++)
1080        pdu_len += rpd->rsd[ i ].length;
1081    
1082    skb = alloc_skb(pdu_len, GFP_ATOMIC);
1083    if (skb == NULL) {
1084        DPRINTK(2, "unable to alloc new skb, rx PDU length = %d\n", pdu_len);
1085
1086        atomic_inc(&vcc->stats->rx_drop);
1087        return -ENOMEM;
1088    } 
1089
1090    __net_timestamp(skb);
1091    
1092#ifdef FORE200E_52BYTE_AAL0_SDU
1093    if (cell_header) {
1094        *((u32*)skb_put(skb, 4)) = cell_header;
1095    }
1096#endif
1097
1098    /* reassemble segments */
1099    for (i = 0; i < rpd->nseg; i++) {
1100        
1101        /* rebuild rx buffer address from rsd handle */
1102        buffer = FORE200E_HDL2BUF(rpd->rsd[ i ].handle);
1103        
1104        /* Make device DMA transfer visible to CPU.  */
1105        fore200e->bus->dma_sync_for_cpu(fore200e, buffer->data.dma_addr, rpd->rsd[ i ].length, DMA_FROM_DEVICE);
1106        
1107        memcpy(skb_put(skb, rpd->rsd[ i ].length), buffer->data.align_addr, rpd->rsd[ i ].length);
1108
1109        /* Now let the device get at it again.  */
1110        fore200e->bus->dma_sync_for_device(fore200e, buffer->data.dma_addr, rpd->rsd[ i ].length, DMA_FROM_DEVICE);
1111    }
1112
1113    DPRINTK(3, "rx skb: len = %d, truesize = %d\n", skb->len, skb->truesize);
1114    
1115    if (pdu_len < fore200e_vcc->rx_min_pdu)
1116        fore200e_vcc->rx_min_pdu = pdu_len;
1117    if (pdu_len > fore200e_vcc->rx_max_pdu)
1118        fore200e_vcc->rx_max_pdu = pdu_len;
1119    fore200e_vcc->rx_pdu++;
1120
1121    /* push PDU */
1122    if (atm_charge(vcc, skb->truesize) == 0) {
1123
1124        DPRINTK(2, "receive buffers saturated for %d.%d.%d - PDU dropped\n",
1125                vcc->itf, vcc->vpi, vcc->vci);
1126
1127        dev_kfree_skb_any(skb);
1128
1129        atomic_inc(&vcc->stats->rx_drop);
1130        return -ENOMEM;
1131    }
1132
1133    ASSERT(atomic_read(&sk_atm(vcc)->sk_wmem_alloc) >= 0);
1134
1135    vcc->push(vcc, skb);
1136    atomic_inc(&vcc->stats->rx);
1137
1138    ASSERT(atomic_read(&sk_atm(vcc)->sk_wmem_alloc) >= 0);
1139
1140    return 0;
1141}
1142
1143
1144static void
1145fore200e_collect_rpd(struct fore200e* fore200e, struct rpd* rpd)
1146{
1147    struct host_bsq* bsq;
1148    struct buffer*   buffer;
1149    int              i;
1150    
1151    for (i = 0; i < rpd->nseg; i++) {
1152
1153        /* rebuild rx buffer address from rsd handle */
1154        buffer = FORE200E_HDL2BUF(rpd->rsd[ i ].handle);
1155
1156        bsq = &fore200e->host_bsq[ buffer->scheme ][ buffer->magn ];
1157
1158#ifdef FORE200E_BSQ_DEBUG
1159        bsq_audit(2, bsq, buffer->scheme, buffer->magn);
1160
1161        if (buffer->supplied == 0)
1162            printk(FORE200E "queue %d.%d, buffer %ld was not supplied\n",
1163                   buffer->scheme, buffer->magn, buffer->index);
1164        buffer->supplied = 0;
1165#endif
1166
1167        /* re-insert the buffer into the free buffer list */
1168        buffer->next = bsq->freebuf;
1169        bsq->freebuf = buffer;
1170
1171        /* then increment the number of free rx buffers */
1172        bsq->freebuf_count++;
1173    }
1174}
1175
1176
1177static void
1178fore200e_rx_irq(struct fore200e* fore200e)
1179{
1180    struct host_rxq*        rxq = &fore200e->host_rxq;
1181    struct host_rxq_entry*  entry;
1182    struct atm_vcc*         vcc;
1183    struct fore200e_vc_map* vc_map;
1184
1185    for (;;) {
1186        
1187        entry = &rxq->host_entry[ rxq->head ];
1188
1189        /* no more received PDUs */
1190        if ((*entry->status & STATUS_COMPLETE) == 0)
1191            break;
1192
1193        vc_map = FORE200E_VC_MAP(fore200e, entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci);
1194
1195        if ((vc_map->vcc == NULL) ||
1196            (test_bit(ATM_VF_READY, &vc_map->vcc->flags) == 0)) {
1197
1198            DPRINTK(1, "no ready VC found for PDU received on %d.%d.%d\n",
1199                    fore200e->atm_dev->number,
1200                    entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci);
1201        }
1202        else {
1203            vcc = vc_map->vcc;
1204            ASSERT(vcc);
1205
1206            if ((*entry->status & STATUS_ERROR) == 0) {
1207
1208                fore200e_push_rpd(fore200e, vcc, entry->rpd);
1209            }
1210            else {
1211                DPRINTK(2, "damaged PDU on %d.%d.%d\n",
1212                        fore200e->atm_dev->number,
1213                        entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci);
1214                atomic_inc(&vcc->stats->rx_err);
1215            }
1216        }
1217
1218        FORE200E_NEXT_ENTRY(rxq->head, QUEUE_SIZE_RX);
1219
1220        fore200e_collect_rpd(fore200e, entry->rpd);
1221
1222        /* rewrite the rpd address to ack the received PDU */
1223        fore200e->bus->write(entry->rpd_dma, &entry->cp_entry->rpd_haddr);
1224        *entry->status = STATUS_FREE;
1225
1226        fore200e_supply(fore200e);
1227    }
1228}
1229
1230
1231#ifndef FORE200E_USE_TASKLET
1232static void
1233fore200e_irq(struct fore200e* fore200e)
1234{
1235    unsigned long flags;
1236
1237    spin_lock_irqsave(&fore200e->q_lock, flags);
1238    fore200e_rx_irq(fore200e);
1239    spin_unlock_irqrestore(&fore200e->q_lock, flags);
1240
1241    spin_lock_irqsave(&fore200e->q_lock, flags);
1242    fore200e_tx_irq(fore200e);
1243    spin_unlock_irqrestore(&fore200e->q_lock, flags);
1244}
1245#endif
1246
1247
1248static irqreturn_t
1249fore200e_interrupt(int irq, void* dev)
1250{
1251    struct fore200e* fore200e = FORE200E_DEV((struct atm_dev*)dev);
1252
1253    if (fore200e->bus->irq_check(fore200e) == 0) {
1254        
1255        DPRINTK(3, "interrupt NOT triggered by device %d\n", fore200e->atm_dev->number);
1256        return IRQ_NONE;
1257    }
1258    DPRINTK(3, "interrupt triggered by device %d\n", fore200e->atm_dev->number);
1259
1260#ifdef FORE200E_USE_TASKLET
1261    tasklet_schedule(&fore200e->tx_tasklet);
1262    tasklet_schedule(&fore200e->rx_tasklet);
1263#else
1264    fore200e_irq(fore200e);
1265#endif
1266    
1267    fore200e->bus->irq_ack(fore200e);
1268    return IRQ_HANDLED;
1269}
1270
1271
1272#ifdef FORE200E_USE_TASKLET
1273static void
1274fore200e_tx_tasklet(unsigned long data)
1275{
1276    struct fore200e* fore200e = (struct fore200e*) data;
1277    unsigned long flags;
1278
1279    DPRINTK(3, "tx tasklet scheduled for device %d\n", fore200e->atm_dev->number);
1280
1281    spin_lock_irqsave(&fore200e->q_lock, flags);
1282    fore200e_tx_irq(fore200e);
1283    spin_unlock_irqrestore(&fore200e->q_lock, flags);
1284}
1285
1286
1287static void
1288fore200e_rx_tasklet(unsigned long data)
1289{
1290    struct fore200e* fore200e = (struct fore200e*) data;
1291    unsigned long    flags;
1292
1293    DPRINTK(3, "rx tasklet scheduled for device %d\n", fore200e->atm_dev->number);
1294
1295    spin_lock_irqsave(&fore200e->q_lock, flags);
1296    fore200e_rx_irq((struct fore200e*) data);
1297    spin_unlock_irqrestore(&fore200e->q_lock, flags);
1298}
1299#endif
1300
1301
1302static int
1303fore200e_select_scheme(struct atm_vcc* vcc)
1304{
1305    /* fairly balance the VCs over (identical) buffer schemes */
1306    int scheme = vcc->vci % 2 ? BUFFER_SCHEME_ONE : BUFFER_SCHEME_TWO;
1307
1308    DPRINTK(1, "VC %d.%d.%d uses buffer scheme %d\n",
1309            vcc->itf, vcc->vpi, vcc->vci, scheme);
1310
1311    return scheme;
1312}
1313
1314
1315static int 
1316fore200e_activate_vcin(struct fore200e* fore200e, int activate, struct atm_vcc* vcc, int mtu)
1317{
1318    struct host_cmdq*        cmdq  = &fore200e->host_cmdq;
1319    struct host_cmdq_entry*  entry = &cmdq->host_entry[ cmdq->head ];
1320    struct activate_opcode   activ_opcode;
1321    struct deactivate_opcode deactiv_opcode;
1322    struct vpvc              vpvc;
1323    int                      ok;
1324    enum fore200e_aal        aal = fore200e_atm2fore_aal(vcc->qos.aal);
1325
1326    FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD);
1327    
1328    if (activate) {
1329        FORE200E_VCC(vcc)->scheme = fore200e_select_scheme(vcc);
1330        
1331        activ_opcode.opcode = OPCODE_ACTIVATE_VCIN;
1332        activ_opcode.aal    = aal;
1333        activ_opcode.scheme = FORE200E_VCC(vcc)->scheme;
1334        activ_opcode.pad    = 0;
1335    }
1336    else {
1337        deactiv_opcode.opcode = OPCODE_DEACTIVATE_VCIN;
1338        deactiv_opcode.pad    = 0;
1339    }
1340
1341    vpvc.vci = vcc->vci;
1342    vpvc.vpi = vcc->vpi;
1343
1344    *entry->status = STATUS_PENDING;
1345
1346    if (activate) {
1347
1348#ifdef FORE200E_52BYTE_AAL0_SDU
1349        mtu = 48;
1350#endif
1351        /* the MTU is not used by the cp, except in the case of AAL0 */
1352        fore200e->bus->write(mtu,                        &entry->cp_entry->cmd.activate_block.mtu);
1353        fore200e->bus->write(*(u32*)&vpvc,         (u32 __iomem *)&entry->cp_entry->cmd.activate_block.vpvc);
1354        fore200e->bus->write(*(u32*)&activ_opcode, (u32 __iomem *)&entry->cp_entry->cmd.activate_block.opcode);
1355    }
1356    else {
1357        fore200e->bus->write(*(u32*)&vpvc,         (u32 __iomem *)&entry->cp_entry->cmd.deactivate_block.vpvc);
1358        fore200e->bus->write(*(u32*)&deactiv_opcode, (u32 __iomem *)&entry->cp_entry->cmd.deactivate_block.opcode);
1359    }
1360
1361    ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400);
1362
1363    *entry->status = STATUS_FREE;
1364
1365    if (ok == 0) {
1366        printk(FORE200E "unable to %s VC %d.%d.%d\n",
1367               activate ? "open" : "close", vcc->itf, vcc->vpi, vcc->vci);
1368        return -EIO;
1369    }
1370
1371    DPRINTK(1, "VC %d.%d.%d %sed\n", vcc->itf, vcc->vpi, vcc->vci, 
1372            activate ? "open" : "clos");
1373
1374    return 0;
1375}
1376
1377
1378#define FORE200E_MAX_BACK2BACK_CELLS 255    /* XXX depends on CDVT */
1379
1380static void
1381fore200e_rate_ctrl(struct atm_qos* qos, struct tpd_rate* rate)
1382{
1383    if (qos->txtp.max_pcr < ATM_OC3_PCR) {
1384    
1385        /* compute the data cells to idle cells ratio from the tx PCR */
1386        rate->data_cells = qos->txtp.max_pcr * FORE200E_MAX_BACK2BACK_CELLS / ATM_OC3_PCR;
1387        rate->idle_cells = FORE200E_MAX_BACK2BACK_CELLS - rate->data_cells;
1388    }
1389    else {
1390        /* disable rate control */
1391        rate->data_cells = rate->idle_cells = 0;
1392    }
1393}
1394
1395
1396static int
1397fore200e_open(struct atm_vcc *vcc)
1398{
1399    struct fore200e*        fore200e = FORE200E_DEV(vcc->dev);
1400    struct fore200e_vcc*    fore200e_vcc;
1401    struct fore200e_vc_map* vc_map;
1402    unsigned long           flags;
1403    int                     vci = vcc->vci;
1404    short                   vpi = vcc->vpi;
1405
1406    ASSERT((vpi >= 0) && (vpi < 1<<FORE200E_VPI_BITS));
1407    ASSERT((vci >= 0) && (vci < 1<<FORE200E_VCI_BITS));
1408
1409    spin_lock_irqsave(&fore200e->q_lock, flags);
1410
1411    vc_map = FORE200E_VC_MAP(fore200e, vpi, vci);
1412    if (vc_map->vcc) {
1413
1414        spin_unlock_irqrestore(&fore200e->q_lock, flags);
1415
1416        printk(FORE200E "VC %d.%d.%d already in use\n",
1417               fore200e->atm_dev->number, vpi, vci);
1418
1419        return -EINVAL;
1420    }
1421
1422    vc_map->vcc = vcc;
1423
1424    spin_unlock_irqrestore(&fore200e->q_lock, flags);
1425
1426    fore200e_vcc = kzalloc(sizeof(struct fore200e_vcc), GFP_ATOMIC);
1427    if (fore200e_vcc == NULL) {
1428        vc_map->vcc = NULL;
1429        return -ENOMEM;
1430    }
1431
1432    DPRINTK(2, "opening %d.%d.%d:%d QoS = (tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; "
1433            "rx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d)\n",
1434            vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal),
1435            fore200e_traffic_class[ vcc->qos.txtp.traffic_class ],
1436            vcc->qos.txtp.min_pcr, vcc->qos.txtp.max_pcr, vcc->qos.txtp.max_cdv, vcc->qos.txtp.max_sdu,
1437            fore200e_traffic_class[ vcc->qos.rxtp.traffic_class ],
1438            vcc->qos.rxtp.min_pcr, vcc->qos.rxtp.max_pcr, vcc->qos.rxtp.max_cdv, vcc->qos.rxtp.max_sdu);
1439    
1440    /* pseudo-CBR bandwidth requested? */
1441    if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) {
1442        
1443        mutex_lock(&fore200e->rate_mtx);
1444        if (fore200e->available_cell_rate < vcc->qos.txtp.max_pcr) {
1445            mutex_unlock(&fore200e->rate_mtx);
1446
1447            kfree(fore200e_vcc);
1448            vc_map->vcc = NULL;
1449            return -EAGAIN;
1450        }
1451
1452        /* reserve bandwidth */
1453        fore200e->available_cell_rate -= vcc->qos.txtp.max_pcr;
1454        mutex_unlock(&fore200e->rate_mtx);
1455    }
1456    
1457    vcc->itf = vcc->dev->number;
1458
1459    set_bit(ATM_VF_PARTIAL,&vcc->flags);
1460    set_bit(ATM_VF_ADDR, &vcc->flags);
1461
1462    vcc->dev_data = fore200e_vcc;
1463    
1464    if (fore200e_activate_vcin(fore200e, 1, vcc, vcc->qos.rxtp.max_sdu) < 0) {
1465
1466        vc_map->vcc = NULL;
1467
1468        clear_bit(ATM_VF_ADDR, &vcc->flags);
1469        clear_bit(ATM_VF_PARTIAL,&vcc->flags);
1470
1471        vcc->dev_data = NULL;
1472
1473        fore200e->available_cell_rate += vcc->qos.txtp.max_pcr;
1474
1475        kfree(fore200e_vcc);
1476        return -EINVAL;
1477    }
1478    
1479    /* compute rate control parameters */
1480    if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) {
1481        
1482        fore200e_rate_ctrl(&vcc->qos, &fore200e_vcc->rate);
1483        set_bit(ATM_VF_HASQOS, &vcc->flags);
1484
1485        DPRINTK(3, "tx on %d.%d.%d:%d, tx PCR = %d, rx PCR = %d, data_cells = %u, idle_cells = %u\n",
1486                vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal),
1487                vcc->qos.txtp.max_pcr, vcc->qos.rxtp.max_pcr, 
1488                fore200e_vcc->rate.data_cells, fore200e_vcc->rate.idle_cells);
1489    }
1490    
1491    fore200e_vcc->tx_min_pdu = fore200e_vcc->rx_min_pdu = MAX_PDU_SIZE + 1;
1492    fore200e_vcc->tx_max_pdu = fore200e_vcc->rx_max_pdu = 0;
1493    fore200e_vcc->tx_pdu     = fore200e_vcc->rx_pdu     = 0;
1494
1495    /* new incarnation of the vcc */
1496    vc_map->incarn = ++fore200e->incarn_count;
1497
1498    /* VC unusable before this flag is set */
1499    set_bit(ATM_VF_READY, &vcc->flags);
1500
1501    return 0;
1502}
1503
1504
1505static void
1506fore200e_close(struct atm_vcc* vcc)
1507{
1508    struct fore200e*        fore200e = FORE200E_DEV(vcc->dev);
1509    struct fore200e_vcc*    fore200e_vcc;
1510    struct fore200e_vc_map* vc_map;
1511    unsigned long           flags;
1512
1513    ASSERT(vcc);
1514    ASSERT((vcc->vpi >= 0) && (vcc->vpi < 1<<FORE200E_VPI_BITS));
1515    ASSERT((vcc->vci >= 0) && (vcc->vci < 1<<FORE200E_VCI_BITS));
1516
1517    DPRINTK(2, "closing %d.%d.%d:%d\n", vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal));
1518
1519    clear_bit(ATM_VF_READY, &vcc->flags);
1520
1521    fore200e_activate_vcin(fore200e, 0, vcc, 0);
1522
1523    spin_lock_irqsave(&fore200e->q_lock, flags);
1524
1525    vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci);
1526
1527    /* the vc is no longer considered as "in use" by fore200e_open() */
1528    vc_map->vcc = NULL;
1529
1530    vcc->itf = vcc->vci = vcc->vpi = 0;
1531
1532    fore200e_vcc = FORE200E_VCC(vcc);
1533    vcc->dev_data = NULL;
1534
1535    spin_unlock_irqrestore(&fore200e->q_lock, flags);
1536
1537    /* release reserved bandwidth, if any */
1538    if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) {
1539
1540        mutex_lock(&fore200e->rate_mtx);
1541        fore200e->available_cell_rate += vcc->qos.txtp.max_pcr;
1542        mutex_unlock(&fore200e->rate_mtx);
1543
1544        clear_bit(ATM_VF_HASQOS, &vcc->flags);
1545    }
1546
1547    clear_bit(ATM_VF_ADDR, &vcc->flags);
1548    clear_bit(ATM_VF_PARTIAL,&vcc->flags);
1549
1550    ASSERT(fore200e_vcc);
1551    kfree(fore200e_vcc);
1552}
1553
1554
1555static int
1556fore200e_send(struct atm_vcc *vcc, struct sk_buff *skb)
1557{
1558    struct fore200e*        fore200e     = FORE200E_DEV(vcc->dev);
1559    struct fore200e_vcc*    fore200e_vcc = FORE200E_VCC(vcc);
1560    struct fore200e_vc_map* vc_map;
1561    struct host_txq*        txq          = &fore200e->host_txq;
1562    struct host_txq_entry*  entry;
1563    struct tpd*             tpd;
1564    struct tpd_haddr        tpd_haddr;
1565    int                     retry        = CONFIG_ATM_FORE200E_TX_RETRY;
1566    int                     tx_copy      = 0;
1567    int                     tx_len       = skb->len;
1568    u32*                    cell_header  = NULL;
1569    unsigned char*          skb_data;
1570    int                     skb_len;
1571    unsigned char*          data;
1572    unsigned long           flags;
1573
1574    ASSERT(vcc);
1575    ASSERT(atomic_read(&sk_atm(vcc)->sk_wmem_alloc) >= 0);
1576    ASSERT(fore200e);
1577    ASSERT(fore200e_vcc);
1578
1579    if (!test_bit(ATM_VF_READY, &vcc->flags)) {
1580        DPRINTK(1, "VC %d.%d.%d not ready for tx\n", vcc->itf, vcc->vpi, vcc->vpi);
1581        dev_kfree_skb_any(skb);
1582        return -EINVAL;
1583    }
1584
1585#ifdef FORE200E_52BYTE_AAL0_SDU
1586    if ((vcc->qos.aal == ATM_AAL0) && (vcc->qos.txtp.max_sdu == ATM_AAL0_SDU)) {
1587        cell_header = (u32*) skb->data;
1588        skb_data    = skb->data + 4;    /* skip 4-byte cell header */
1589        skb_len     = tx_len = skb->len  - 4;
1590
1591        DPRINTK(3, "user-supplied cell header = 0x%08x\n", *cell_header);
1592    }
1593    else 
1594#endif
1595    {
1596        skb_data = skb->data;
1597        skb_len  = skb->len;
1598    }
1599    
1600    if (((unsigned long)skb_data) & 0x3) {
1601
1602        DPRINTK(2, "misaligned tx PDU on device %s\n", fore200e->name);
1603        tx_copy = 1;
1604        tx_len  = skb_len;
1605    }
1606
1607    if ((vcc->qos.aal == ATM_AAL0) && (skb_len % ATM_CELL_PAYLOAD)) {
1608
1609        /* this simply NUKES the PCA board */
1610        DPRINTK(2, "incomplete tx AAL0 PDU on device %s\n", fore200e->name);
1611        tx_copy = 1;
1612        tx_len  = ((skb_len / ATM_CELL_PAYLOAD) + 1) * ATM_CELL_PAYLOAD;
1613    }
1614    
1615    if (tx_copy) {
1616        data = kmalloc(tx_len, GFP_ATOMIC | GFP_DMA);
1617        if (data == NULL) {
1618            if (vcc->pop) {
1619                vcc->pop(vcc, skb);
1620            }
1621            else {
1622                dev_kfree_skb_any(skb);
1623            }
1624            return -ENOMEM;
1625        }
1626
1627        memcpy(data, skb_data, skb_len);
1628        if (skb_len < tx_len)
1629            memset(data + skb_len, 0x00, tx_len - skb_len);
1630    }
1631    else {
1632        data = skb_data;
1633    }
1634
1635    vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci);
1636    ASSERT(vc_map->vcc == vcc);
1637
1638  retry_here:
1639
1640    spin_lock_irqsave(&fore200e->q_lock, flags);
1641
1642    entry = &txq->host_entry[ txq->head ];
1643
1644    if ((*entry->status != STATUS_FREE) || (txq->txing >= QUEUE_SIZE_TX - 2)) {
1645
1646        /* try to free completed tx queue entries */
1647        fore200e_tx_irq(fore200e);
1648
1649        if (*entry->status != STATUS_FREE) {
1650
1651            spin_unlock_irqrestore(&fore200e->q_lock, flags);
1652
1653            /* retry once again? */
1654            if (--retry > 0) {
1655                udelay(50);
1656                goto retry_here;
1657            }
1658
1659            atomic_inc(&vcc->stats->tx_err);
1660
1661            fore200e->tx_sat++;
1662            DPRINTK(2, "tx queue of device %s is saturated, PDU dropped - heartbeat is %08x\n",
1663                    fore200e->name, fore200e->cp_queues->heartbeat);
1664            if (vcc->pop) {
1665                vcc->pop(vcc, skb);
1666            }
1667            else {
1668                dev_kfree_skb_any(skb);
1669            }
1670
1671            if (tx_copy)
1672                kfree(data);
1673
1674            return -ENOBUFS;
1675        }
1676    }
1677
1678    entry->incarn = vc_map->incarn;
1679    entry->vc_map = vc_map;
1680    entry->skb    = skb;
1681    entry->data   = tx_copy ? data : NULL;
1682
1683    tpd = entry->tpd;
1684    tpd->tsd[ 0 ].buffer = fore200e->bus->dma_map(fore200e, data, tx_len, DMA_TO_DEVICE);
1685    tpd->tsd[ 0 ].length = tx_len;
1686
1687    FORE200E_NEXT_ENTRY(txq->head, QUEUE_SIZE_TX);
1688    txq->txing++;
1689
1690    /* The dma_map call above implies a dma_sync so the device can use it,
1691     * thus no explicit dma_sync call is necessary here.
1692     */
1693    
1694    DPRINTK(3, "tx on %d.%d.%d:%d, len = %u (%u)\n", 
1695            vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal),
1696            tpd->tsd[0].length, skb_len);
1697
1698    if (skb_len < fore200e_vcc->tx_min_pdu)
1699        fore200e_vcc->tx_min_pdu = skb_len;
1700    if (skb_len > fore200e_vcc->tx_max_pdu)
1701        fore200e_vcc->tx_max_pdu = skb_len;
1702    fore200e_vcc->tx_pdu++;
1703
1704    /* set tx rate control information */
1705    tpd->rate.data_cells = fore200e_vcc->rate.data_cells;
1706    tpd->rate.idle_cells = fore200e_vcc->rate.idle_cells;
1707
1708    if (cell_header) {
1709        tpd->atm_header.clp = (*cell_header & ATM_HDR_CLP);
1710        tpd->atm_header.plt = (*cell_header & ATM_HDR_PTI_MASK) >> ATM_HDR_PTI_SHIFT;
1711        tpd->atm_header.vci = (*cell_header & ATM_HDR_VCI_MASK) >> ATM_HDR_VCI_SHIFT;
1712        tpd->atm_header.vpi = (*cell_header & ATM_HDR_VPI_MASK) >> ATM_HDR_VPI_SHIFT;
1713        tpd->atm_header.gfc = (*cell_header & ATM_HDR_GFC_MASK) >> ATM_HDR_GFC_SHIFT;
1714    }
1715    else {
1716        /* set the ATM header, common to all cells conveying the PDU */
1717        tpd->atm_header.clp = 0;
1718        tpd->atm_header.plt = 0;
1719        tpd->atm_header.vci = vcc->vci;
1720        tpd->atm_header.vpi = vcc->vpi;
1721        tpd->atm_header.gfc = 0;
1722    }
1723
1724    tpd->spec.length = tx_len;
1725    tpd->spec.nseg   = 1;
1726    tpd->spec.aal    = fore200e_atm2fore_aal(vcc->qos.aal);
1727    tpd->spec.intr   = 1;
1728
1729    tpd_haddr.size  = sizeof(struct tpd) / (1<<TPD_HADDR_SHIFT);  /* size is expressed in 32 byte blocks */
1730    tpd_haddr.pad   = 0;
1731    tpd_haddr.haddr = entry->tpd_dma >> TPD_HADDR_SHIFT;          /* shift the address, as we are in a bitfield */
1732
1733    *entry->status = STATUS_PENDING;
1734    fore200e->bus->write(*(u32*)&tpd_haddr, (u32 __iomem *)&entry->cp_entry->tpd_haddr);
1735
1736    spin_unlock_irqrestore(&fore200e->q_lock, flags);
1737
1738    return 0;
1739}
1740
1741
1742static int
1743fore200e_getstats(struct fore200e* fore200e)
1744{
1745    struct host_cmdq*       cmdq  = &fore200e->host_cmdq;
1746    struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ];
1747    struct stats_opcode     opcode;
1748    int                     ok;
1749    u32                     stats_dma_addr;
1750
1751    if (fore200e->stats == NULL) {
1752        fore200e->stats = kzalloc(sizeof(struct stats), GFP_KERNEL | GFP_DMA);
1753        if (fore200e->stats == NULL)
1754            return -ENOMEM;
1755    }
1756    
1757    stats_dma_addr = fore200e->bus->dma_map(fore200e, fore200e->stats,
1758                                            sizeof(struct stats), DMA_FROM_DEVICE);
1759    
1760    FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD);
1761
1762    opcode.opcode = OPCODE_GET_STATS;
1763    opcode.pad    = 0;
1764
1765    fore200e->bus->write(stats_dma_addr, &entry->cp_entry->cmd.stats_block.stats_haddr);
1766    
1767    *entry->status = STATUS_PENDING;
1768
1769    fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.stats_block.opcode);
1770
1771    ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400);
1772
1773    *entry->status = STATUS_FREE;
1774
1775    fore200e->bus->dma_unmap(fore200e, stats_dma_addr, sizeof(struct stats), DMA_FROM_DEVICE);
1776    
1777    if (ok == 0) {
1778        printk(FORE200E "unable to get statistics from device %s\n", fore200e->name);
1779        return -EIO;
1780    }
1781
1782    return 0;
1783}
1784
1785
1786static int
1787fore200e_getsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, int optlen)
1788{
1789    /* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */
1790
1791    DPRINTK(2, "getsockopt %d.%d.%d, level = %d, optname = 0x%x, optval = 0x%p, optlen = %d\n",
1792            vcc->itf, vcc->vpi, vcc->vci, level, optname, optval, optlen);
1793
1794    return -EINVAL;
1795}
1796
1797
1798static int
1799fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, unsigned int optlen)
1800{
1801    /* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */
1802    
1803    DPRINTK(2, "setsockopt %d.%d.%d, level = %d, optname = 0x%x, optval = 0x%p, optlen = %d\n",
1804            vcc->itf, vcc->vpi, vcc->vci, level, optname, optval, optlen);
1805    
1806    return -EINVAL;
1807}
1808
1809
1810#if 0 /* currently unused */
1811static int
1812fore200e_get_oc3(struct fore200e* fore200e, struct oc3_regs* regs)
1813{
1814    struct host_cmdq*       cmdq  = &fore200e->host_cmdq;
1815    struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ];
1816    struct oc3_opcode       opcode;
1817    int                     ok;
1818    u32                     oc3_regs_dma_addr;
1819
1820    oc3_regs_dma_addr = fore200e->bus->dma_map(fore200e, regs, sizeof(struct oc3_regs), DMA_FROM_DEVICE);
1821
1822    FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD);
1823
1824    opcode.opcode = OPCODE_GET_OC3;
1825    opcode.reg    = 0;
1826    opcode.value  = 0;
1827    opcode.mask   = 0;
1828
1829    fore200e->bus->write(oc3_regs_dma_addr, &entry->cp_entry->cmd.oc3_block.regs_haddr);
1830    
1831    *entry->status = STATUS_PENDING;
1832
1833    fore200e->bus->write(*(u32*)&opcode, (u32*)&entry->cp_entry->cmd.oc3_block.opcode);
1834
1835    ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400);
1836
1837    *entry->status = STATUS_FREE;
1838
1839    fore200e->bus->dma_unmap(fore200e, oc3_regs_dma_addr, sizeof(struct oc3_regs), DMA_FROM_DEVICE);
1840    
1841    if (ok == 0) {
1842        printk(FORE200E "unable to get OC-3 regs of device %s\n", fore200e->name);
1843        return -EIO;
1844    }
1845
1846    return 0;
1847}
1848#endif
1849
1850
1851static int
1852fore200e_set_oc3(struct fore200e* fore200e, u32 reg, u32 value, u32 mask)
1853{
1854    struct host_cmdq*       cmdq  = &fore200e->host_cmdq;
1855    struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ];
1856    struct oc3_opcode       opcode;
1857    int                     ok;
1858
1859    DPRINTK(2, "set OC-3 reg = 0x%02x, value = 0x%02x, mask = 0x%02x\n", reg, value, mask);
1860
1861    FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD);
1862
1863    opcode.opcode = OPCODE_SET_OC3;
1864    opcode.reg    = reg;
1865    opcode.value  = value;
1866    opcode.mask   = mask;
1867
1868    fore200e->bus->write(0, &entry->cp_entry->cmd.oc3_block.regs_haddr);
1869    
1870    *entry->status = STATUS_PENDING;
1871
1872    fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.oc3_block.opcode);
1873
1874    ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400);
1875
1876    *entry->status = STATUS_FREE;
1877
1878    if (ok == 0) {
1879        printk(FORE200E "unable to set OC-3 reg 0x%02x of device %s\n", reg, fore200e->name);
1880        return -EIO;
1881    }
1882
1883    return 0;
1884}
1885
1886
1887static int
1888fore200e_setloop(struct fore200e* fore200e, int loop_mode)
1889{
1890    u32 mct_value, mct_mask;
1891    int error;
1892
1893    if (!capable(CAP_NET_ADMIN))
1894        return -EPERM;
1895    
1896    switch (loop_mode) {
1897
1898    case ATM_LM_NONE:
1899        mct_value = 0; 
1900        mct_mask  = SUNI_MCT_DLE | SUNI_MCT_LLE;
1901        break;
1902        
1903    case ATM_LM_LOC_PHY:
1904        mct_value = mct_mask = SUNI_MCT_DLE;
1905        break;
1906
1907    case ATM_LM_RMT_PHY:
1908        mct_value = mct_mask = SUNI_MCT_LLE;
1909        break;
1910
1911    default:
1912        return -EINVAL;
1913    }
1914
1915    error = fore200e_set_oc3(fore200e, SUNI_MCT, mct_value, mct_mask);
1916    if (error == 0)
1917        fore200e->loop_mode = loop_mode;
1918
1919    return error;
1920}
1921
1922
1923static int
1924fore200e_fetch_stats(struct fore200e* fore200e, struct sonet_stats __user *arg)
1925{
1926    struct sonet_stats tmp;
1927
1928    if (fore200e_getstats(fore200e) < 0)
1929        return -EIO;
1930
1931    tmp.section_bip = be32_to_cpu(fore200e->stats->oc3.section_bip8_errors);
1932    tmp.line_bip    = be32_to_cpu(fore200e->stats->oc3.line_bip24_errors);
1933    tmp.path_bip    = be32_to_cpu(fore200e->stats->oc3.path_bip8_errors);
1934    tmp.line_febe   = be32_to_cpu(fore200e->stats->oc3.line_febe_errors);
1935    tmp.path_febe   = be32_to_cpu(fore200e->stats->oc3.path_febe_errors);
1936    tmp.corr_hcs    = be32_to_cpu(fore200e->stats->oc3.corr_hcs_errors);
1937    tmp.uncorr_hcs  = be32_to_cpu(fore200e->stats->oc3.ucorr_hcs_errors);
1938    tmp.tx_cells    = be32_to_cpu(fore200e->stats->aal0.cells_transmitted)  +
1939                      be32_to_cpu(fore200e->stats->aal34.cells_transmitted) +
1940                      be32_to_cpu(fore200e->stats->aal5.cells_transmitted);
1941    tmp.rx_cells    = be32_to_cpu(fore200e->stats->aal0.cells_received)     +
1942                      be32_to_cpu(fore200e->stats->aal34.cells_received)    +
1943                      be32_to_cpu(fore200e->stats->aal5.cells_received);
1944
1945    if (arg)
1946        return copy_to_user(arg, &tmp, sizeof(struct sonet_stats)) ? -EFAULT : 0;       
1947    
1948    return 0;
1949}
1950
1951
1952static int
1953fore200e_ioctl(struct atm_dev* dev, unsigned int cmd, void __user * arg)
1954{
1955    struct fore200e* fore200e = FORE200E_DEV(dev);
1956    
1957    DPRINTK(2, "ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg);
1958
1959    switch (cmd) {
1960
1961    case SONET_GETSTAT:
1962        return fore200e_fetch_stats(fore200e, (struct sonet_stats __user *)arg);
1963
1964    case SONET_GETDIAG:
1965        return put_user(0, (int __user *)arg) ? -EFAULT : 0;
1966
1967    case ATM_SETLOOP:
1968        return fore200e_setloop(fore200e, (int)(unsigned long)arg);
1969
1970    case ATM_GETLOOP:
1971        return put_user(fore200e->loop_mode, (int __user *)arg) ? -EFAULT : 0;
1972
1973    case ATM_QUERYLOOP:
1974        return put_user(ATM_LM_LOC_PHY | ATM_LM_RMT_PHY, (int __user *)arg) ? -EFAULT : 0;
1975    }
1976
1977    return -ENOSYS; /* not implemented */
1978}
1979
1980
1981static int
1982fore200e_change_qos(struct atm_vcc* vcc,struct atm_qos* qos, int flags)
1983{
1984    struct fore200e_vcc* fore200e_vcc = FORE200E_VCC(vcc);
1985    struct fore200e*     fore200e     = FORE200E_DEV(vcc->dev);
1986
1987    if (!test_bit(ATM_VF_READY, &vcc->flags)) {
1988        DPRINTK(1, "VC %d.%d.%d not ready for QoS change\n", vcc->itf, vcc->vpi, vcc->vpi);
1989        return -EINVAL;
1990    }
1991
1992    DPRINTK(2, "change_qos %d.%d.%d, "
1993            "(tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; "
1994            "rx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d), flags = 0x%x\n"
1995            "available_cell_rate = %u",
1996            vcc->itf, vcc->vpi, vcc->vci,
1997            fore200e_traffic_class[ qos->txtp.traffic_class ],
1998            qos->txtp.min_pcr, qos->txtp.max_pcr, qos->txtp.max_cdv, qos->txtp.max_sdu,
1999            fore200e_traffic_class[ qos->rxtp.traffic_class ],
2000            qos->rxtp.min_pcr, qos->rxtp.max_pcr, qos->rxtp.max_cdv, qos->rxtp.max_sdu,
2001            flags, fore200e->available_cell_rate);
2002
2003    if ((qos->txtp.traffic_class == ATM_CBR) && (qos->txtp.max_pcr > 0)) {
2004
2005        mutex_lock(&fore200e->rate_mtx);
2006        if (fore200e->available_cell_rate + vcc->qos.txtp.max_pcr < qos->txtp.max_pcr) {
2007            mutex_unlock(&fore200e->rate_mtx);
2008            return -EAGAIN;
2009        }
2010
2011        fore200e->available_cell_rate += vcc->qos.txtp.max_pcr;
2012        fore200e->available_cell_rate -= qos->txtp.max_pcr;
2013
2014        mutex_unlock(&fore200e->rate_mtx);
2015        
2016        memcpy(&vcc->qos, qos, sizeof(struct atm_qos));
2017        
2018        /* update rate control parameters */
2019        fore200e_rate_ctrl(qos, &fore200e_vcc->rate);
2020
2021        set_bit(ATM_VF_HASQOS, &vcc->flags);
2022
2023        return 0;
2024    }
2025    
2026    return -EINVAL;
2027}
2028    
2029
2030static int fore200e_irq_request(struct fore200e *fore200e)
2031{
2032    if (request_irq(fore200e->irq, fore200e_interrupt, IRQF_SHARED, fore200e->name, fore200e->atm_dev) < 0) {
2033
2034        printk(FORE200E "unable to reserve IRQ %s for device %s\n",
2035               fore200e_irq_itoa(fore200e->irq), fore200e->name);
2036        return -EBUSY;
2037    }
2038
2039    printk(FORE200E "IRQ %s reserved for device %s\n",
2040           fore200e_irq_itoa(fore200e->irq), fore200e->name);
2041
2042#ifdef FORE200E_USE_TASKLET
2043    tasklet_init(&fore200e->tx_tasklet, fore200e_tx_tasklet, (unsigned long)fore200e);
2044    tasklet_init(&fore200e->rx_tasklet, fore200e_rx_tasklet, (unsigned long)fore200e);
2045#endif
2046
2047    fore200e->state = FORE200E_STATE_IRQ;
2048    return 0;
2049}
2050
2051
2052static int fore200e_get_esi(struct fore200e *fore200e)
2053{
2054    struct prom_data* prom = kzalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA);
2055    int ok, i;
2056
2057    if (!prom)
2058        return -ENOMEM;
2059
2060    ok = fore200e->bus->prom_read(fore200e, prom);
2061    if (ok < 0) {
2062        kfree(prom);
2063        return -EBUSY;
2064    }
2065        
2066    printk(FORE200E "device %s, rev. %c, S/N: %d, ESI: %pM\n",
2067           fore200e->name, 
2068           (prom->hw_revision & 0xFF) + '@',    /* probably meaningless with SBA boards */
2069           prom->serial_number & 0xFFFF, &prom->mac_addr[2]);
2070        
2071    for (i = 0; i < ESI_LEN; i++) {
2072        fore200e->esi[ i ] = fore200e->atm_dev->esi[ i ] = prom->mac_addr[ i + 2 ];
2073    }
2074    
2075    kfree(prom);
2076
2077    return 0;
2078}
2079
2080
2081static int fore200e_alloc_rx_buf(struct fore200e *fore200e)
2082{
2083    int scheme, magn, nbr, size, i;
2084
2085    struct host_bsq* bsq;
2086    struct buffer*   buffer;
2087
2088    for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) {
2089        for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) {
2090
2091            bsq = &fore200e->host_bsq[ scheme ][ magn ];
2092
2093            nbr  = fore200e_rx_buf_nbr[ scheme ][ magn ];
2094            size = fore200e_rx_buf_size[ scheme ][ magn ];
2095
2096            DPRINTK(2, "rx buffers %d / %d are being allocated\n", scheme, magn);
2097
2098            /* allocate the array of receive buffers */
2099            buffer = bsq->buffer = kzalloc(nbr * sizeof(struct buffer), GFP_KERNEL);
2100
2101            if (buffer == NULL)
2102                return -ENOMEM;
2103
2104            bsq->freebuf = NULL;
2105
2106            for (i = 0; i < nbr; i++) {
2107
2108                buffer[ i ].scheme = scheme;
2109                buffer[ i ].magn   = magn;
2110#ifdef FORE200E_BSQ_DEBUG
2111                buffer[ i ].index  = i;
2112                buffer[ i ].supplied = 0;
2113#endif
2114
2115                /* allocate the receive buffer body */
2116                if (fore200e_chunk_alloc(fore200e,
2117                                         &buffer[ i ].data, size, fore200e->bus->buffer_alignment,
2118                                         DMA_FROM_DEVICE) < 0) {
2119                    
2120                    while (i > 0)
2121                        fore200e_chunk_free(fore200e, &buffer[ --i ].data);
2122                    kfree(buffer);
2123                    
2124                    return -ENOMEM;
2125                }
2126
2127                /* insert the buffer into the free buffer list */
2128                buffer[ i ].next = bsq->freebuf;
2129                bsq->freebuf = &buffer[ i ];
2130            }
2131            /* all the buffers are free, initially */
2132            bsq->freebuf_count = nbr;
2133
2134#ifdef FORE200E_BSQ_DEBUG
2135            bsq_audit(3, bsq, scheme, magn);
2136#endif
2137        }
2138    }
2139
2140    fore200e->state = FORE200E_STATE_ALLOC_BUF;
2141    return 0;
2142}
2143
2144
2145static int fore200e_init_bs_queue(struct fore200e *fore200e)
2146{
2147    int scheme, magn, i;
2148
2149    struct host_bsq*     bsq;
2150    struct cp_bsq_entry __iomem * cp_entry;
2151
2152    for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) {
2153        for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) {
2154
2155            DPRINTK(2, "buffer supply queue %d / %d is being initialized\n", scheme, magn);
2156
2157            bsq = &fore200e->host_bsq[ scheme ][ magn ];
2158
2159            /* allocate and align the array of status words */
2160            if (fore200e->bus->dma_chunk_alloc(fore200e,
2161                                               &bsq->status,
2162                                               sizeof(enum status), 
2163                                               QUEUE_SIZE_BS,
2164                                               fore200e->bus->status_alignment) < 0) {
2165                return -ENOMEM;
2166            }
2167
2168            /* allocate and align the array of receive buffer descriptors */
2169            if (fore200e->bus->dma_chunk_alloc(fore200e,
2170                                               &bsq->rbd_block,
2171                                               sizeof(struct rbd_block),
2172                                               QUEUE_SIZE_BS,
2173                                               fore200e->bus->descr_alignment) < 0) {
2174                
2175                fore200e->bus->dma_chunk_free(fore200e, &bsq->status);
2176                return -ENOMEM;
2177            }
2178            
2179            /* get the base address of the cp resident buffer supply queue entries */
2180            cp_entry = fore200e->virt_base + 
2181                       fore200e->bus->read(&fore200e->cp_queues->cp_bsq[ scheme ][ magn ]);
2182            
2183            /* fill the host resident and cp resident buffer supply queue entries */
2184            for (i = 0; i < QUEUE_SIZE_BS; i++) {
2185                
2186                bsq->host_entry[ i ].status = 
2187                                     FORE200E_INDEX(bsq->status.align_addr, enum status, i);
2188                bsq->host_entry[ i ].rbd_block =
2189                                     FORE200E_INDEX(bsq->rbd_block.align_addr, struct rbd_block, i);
2190                bsq->host_entry[ i ].rbd_block_dma =
2191                                     FORE200E_DMA_INDEX(bsq->rbd_block.dma_addr, struct rbd_block, i);
2192                bsq->host_entry[ i ].cp_entry = &cp_entry[ i ];
2193                
2194                *bsq->host_entry[ i ].status = STATUS_FREE;
2195                
2196                fore200e->bus->write(FORE200E_DMA_INDEX(bsq->status.dma_addr, enum status, i), 
2197                                     &cp_entry[ i ].status_haddr);
2198            }
2199        }
2200    }
2201
2202    fore200e->state = FORE200E_STATE_INIT_BSQ;
2203    return 0;
2204}
2205
2206
2207static int fore200e_init_rx_queue(struct fore200e *fore200e)
2208{
2209    struct host_rxq*     rxq =  &fore200e->host_rxq;
2210    struct cp_rxq_entry __iomem * cp_entry;
2211    int i;
2212
2213    DPRINTK(2, "receive queue is being initialized\n");
2214
2215    /* allocate and align the array of status words */
2216    if (fore200e->bus->dma_chunk_alloc(fore200e,
2217                                       &rxq->status,
2218                                       sizeof(enum status), 
2219                                       QUEUE_SIZE_RX,
2220                                       fore200e->bus->status_alignment) < 0) {
2221        return -ENOMEM;
2222    }
2223
2224    /* allocate and align the array of receive PDU descriptors */
2225    if (fore200e->bus->dma_chunk_alloc(fore200e,
2226                                       &rxq->rpd,
2227                                       sizeof(struct rpd), 
2228                                       QUEUE_SIZE_RX,
2229                                       fore200e->bus->descr_alignment) < 0) {
2230        
2231        fore200e->bus->dma_chunk_free(fore200e, &rxq->status);
2232        return -ENOMEM;
2233    }
2234
2235    /* get the base address of the cp resident rx queue entries */
2236    cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_rxq);
2237
2238    /* fill the host resident and cp resident rx entries */
2239    for (i=0; i < QUEUE_SIZE_RX; i++) {
2240        
2241        rxq->host_entry[ i ].status = 
2242                             FORE200E_INDEX(rxq->status.align_addr, enum status, i);
2243        rxq->host_entry[ i ].rpd = 
2244                             FORE200E_INDEX(rxq->rpd.align_addr, struct rpd, i);
2245        rxq->host_entry[ i ].rpd_dma = 
2246                             FORE200E_DMA_INDEX(rxq->rpd.dma_addr, struct rpd, i);
2247        rxq->host_entry[ i ].cp_entry = &cp_entry[ i ];
2248
2249        *rxq->host_entry[ i ].status = STATUS_FREE;
2250
2251        fore200e->bus->write(FORE200E_DMA_INDEX(rxq->status.dma_addr, enum status, i), 
2252                             &cp_entry[ i ].status_haddr);
2253
2254        fore200e->bus->write(FORE200E_DMA_INDEX(rxq->rpd.dma_addr, struct rpd, i),
2255                             &cp_entry[ i ].rpd_haddr);
2256    }
2257
2258    /* set the head entry of the queue */
2259    rxq->head = 0;
2260
2261    fore200e->state = FORE200E_STATE_INIT_RXQ;
2262    return 0;
2263}
2264
2265
2266static int fore200e_init_tx_queue(struct fore200e *fore200e)
2267{
2268    struct host_txq*     txq =  &fore200e->host_txq;
2269    struct cp_txq_entry __iomem * cp_entry;
2270    int i;
2271
2272    DPRINTK(2, "transmit queue is being initialized\n");
2273
2274    /* allocate and align the array of status words */
2275    if (fore200e->bus->dma_chunk_alloc(fore200e,
2276                                       &txq->status,
2277                                       sizeof(enum status), 
2278                                       QUEUE_SIZE_TX,
2279                                       fore200e->bus->status_alignment) < 0) {
2280        return -ENOMEM;
2281    }
2282
2283    /* allocate and align the array of transmit PDU descriptors */
2284    if (fore200e->bus->dma_chunk_alloc(fore200e,
2285                                       &txq->tpd,
2286                                       sizeof(struct tpd), 
2287                                       QUEUE_SIZE_TX,
2288                                       fore200e->bus->descr_alignment) < 0) {
2289        
2290        fore200e->bus->dma_chunk_free(fore200e, &txq->status);
2291        return -ENOMEM;
2292    }
2293
2294    /* get the base address of the cp resident tx queue entries */
2295    cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_txq);
2296
2297    /* fill the host resident and cp resident tx entries */
2298    for (i=0; i < QUEUE_SIZE_TX; i++) {
2299        
2300        txq->host_entry[ i ].status = 
2301                             FORE200E_INDEX(txq->status.align_addr, enum status, i);
2302        txq->host_entry[ i ].tpd = 
2303                             FORE200E_INDEX(txq->tpd.align_addr, struct tpd, i);
2304        txq->host_entry[ i ].tpd_dma  = 
2305                             FORE200E_DMA_INDEX(txq->tpd.dma_addr, struct tpd, i);
2306        txq->host_entry[ i ].cp_entry = &cp_entry[ i ];
2307
2308        *txq->host_entry[ i ].status = STATUS_FREE;
2309        
2310        fore200e->bus->write(FORE200E_DMA_INDEX(txq->status.dma_addr, enum status, i), 
2311                             &cp_entry[ i ].status_haddr);
2312        
2313        /* although there is a one-to-one mapping of tx queue entries and tpds,
2314           we do not write here the DMA (physical) base address of each tpd into
2315           the related cp resident entry, because the cp relies on this write
2316           operation to detect that a new pdu has been submitted for tx */
2317    }
2318
2319    /* set the head and tail entries of the queue */
2320    txq->head = 0;
2321    txq->tail = 0;
2322
2323    fore200e->state = FORE200E_STATE_INIT_TXQ;
2324    return 0;
2325}
2326
2327
2328static int fore200e_init_cmd_queue(struct fore200e *fore200e)
2329{
2330    struct host_cmdq*     cmdq =  &fore200e->host_cmdq;
2331    struct cp_cmdq_entry __iomem * cp_entry;
2332    int i;
2333
2334    DPRINTK(2, "command queue is being initialized\n");
2335
2336    /* allocate and align the array of status words */
2337    if (fore200e->bus->dma_chunk_alloc(fore200e,
2338                                       &cmdq->status,
2339                                       sizeof(enum status), 
2340                                       QUEUE_SIZE_CMD,
2341                                       fore200e->bus->status_alignment) < 0) {
2342        return -ENOMEM;
2343    }
2344    
2345    /* get the base address of the cp resident cmd queue entries */
2346    cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_cmdq);
2347
2348    /* fill the host resident and cp resident cmd entries */
2349    for (i=0; i < QUEUE_SIZE_CMD; i++) {
2350        
2351        cmdq->host_entry[ i ].status   = 
2352                              FORE200E_INDEX(cmdq->status.align_addr, enum status, i);
2353        cmdq->host_entry[ i ].cp_entry = &cp_entry[ i ];
2354
2355        *cmdq->host_entry[ i ].status = STATUS_FREE;
2356
2357        fore200e->bus->write(FORE200E_DMA_INDEX(cmdq->status.dma_addr, enum status, i), 
2358                             &cp_entry[ i ].status_haddr);
2359    }
2360
2361    /* set the head entry of the queue */
2362    cmdq->head = 0;
2363
2364    fore200e->state = FORE200E_STATE_INIT_CMDQ;
2365    return 0;
2366}
2367
2368
2369static void fore200e_param_bs_queue(struct fore200e *fore200e,
2370                                    enum buffer_scheme scheme,
2371                                    enum buffer_magn magn, int queue_length,
2372                                    int pool_size, int supply_blksize)
2373{
2374    struct bs_spec __iomem * bs_spec = &fore200e->cp_queues->init.bs_spec[ scheme ][ magn ];
2375
2376    fore200e->bus->write(queue_length,                           &bs_spec->queue_length);
2377    fore200e->bus->write(fore200e_rx_buf_size[ scheme ][ magn ], &bs_spec->buffer_size);
2378    fore200e->bus->write(pool_size,                              &bs_spec->pool_size);
2379    fore200e->bus->write(supply_blksize,                         &bs_spec->supply_blksize);
2380}
2381
2382
2383static int fore200e_initialize(struct fore200e *fore200e)
2384{
2385    struct cp_queues __iomem * cpq;
2386    int               ok, scheme, magn;
2387
2388    DPRINTK(2, "device %s being initialized\n", fore200e->name);
2389
2390    mutex_init(&fore200e->rate_mtx);
2391    spin_lock_init(&fore200e->q_lock);
2392
2393    cpq = fore200e->cp_queues = fore200e->virt_base + FORE200E_CP_QUEUES_OFFSET;
2394
2395    /* enable cp to host interrupts */
2396    fore200e->bus->write(1, &cpq->imask);
2397
2398    if (fore200e->bus->irq_enable)
2399        fore200e->bus->irq_enable(fore200e);
2400    
2401    fore200e->bus->write(NBR_CONNECT, &cpq->init.num_connect);
2402
2403    fore200e->bus->write(QUEUE_SIZE_CMD, &cpq->init.cmd_queue_len);
2404    fore200e->bus->write(QUEUE_SIZE_RX,  &cpq->init.rx_queue_len);
2405    fore200e->bus->write(QUEUE_SIZE_TX,  &cpq->init.tx_queue_len);
2406
2407    fore200e->bus->write(RSD_EXTENSION,  &cpq->init.rsd_extension);
2408    fore200e->bus->write(TSD_EXTENSION,  &cpq->init.tsd_extension);
2409
2410    for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++)
2411        for (magn = 0; magn < BUFFER_MAGN_NBR; magn++)
2412            fore200e_param_bs_queue(fore200e, scheme, magn,
2413                                    QUEUE_SIZE_BS, 
2414                                    fore200e_rx_buf_nbr[ scheme ][ magn ],
2415                                    RBD_BLK_SIZE);
2416
2417    /* issue the initialize command */
2418    fore200e->bus->write(STATUS_PENDING,    &cpq->init.status);
2419    fore200e->bus->write(OPCODE_INITIALIZE, &cpq->init.opcode);
2420
2421    ok = fore200e_io_poll(fore200e, &cpq->init.status, STATUS_COMPLETE, 3000);
2422    if (ok == 0) {
2423        printk(FORE200E "device %s initialization failed\n", fore200e->name);
2424        return -ENODEV;
2425    }
2426
2427    printk(FORE200E "device %s initialized\n", fore200e->name);
2428
2429    fore200e->state = FORE200E_STATE_INITIALIZE;
2430    return 0;
2431}
2432
2433
2434static void fore200e_monitor_putc(struct fore200e *fore200e, char c)
2435{
2436    struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
2437
2438#if 0
2439    printk("%c", c);
2440#endif
2441    fore200e->bus->write(((u32) c) | FORE200E_CP_MONITOR_UART_AVAIL, &monitor->soft_uart.send);
2442}
2443
2444
2445static int fore200e_monitor_getc(struct fore200e *fore200e)
2446{
2447    struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
2448    unsigned long      timeout = jiffies + msecs_to_jiffies(50);
2449    int                c;
2450
2451    while (time_before(jiffies, timeout)) {
2452
2453        c = (int) fore200e->bus->read(&monitor->soft_uart.recv);
2454
2455        if (c & FORE200E_CP_MONITOR_UART_AVAIL) {
2456
2457            fore200e->bus->write(FORE200E_CP_MONITOR_UART_FREE, &monitor->soft_uart.recv);
2458#if 0
2459            printk("%c", c & 0xFF);
2460#endif
2461            return c & 0xFF;
2462        }
2463    }
2464
2465    return -1;
2466}
2467
2468
2469static void fore200e_monitor_puts(struct fore200e *fore200e, char *str)
2470{
2471    while (*str) {
2472
2473        /* the i960 monitor doesn't accept any new character if it has something to say */
2474        while (fore200e_monitor_getc(fore200e) >= 0);
2475        
2476        fore200e_monitor_putc(fore200e, *str++);
2477    }
2478
2479    while (fore200e_monitor_getc(fore200e) >= 0);
2480}
2481
2482#ifdef __LITTLE_ENDIAN
2483#define FW_EXT ".bin"
2484#else
2485#define FW_EXT "_ecd.bin2"
2486#endif
2487
2488static int fore200e_load_and_start_fw(struct fore200e *fore200e)
2489{
2490    const struct firmware *firmware;
2491    struct device *device;
2492    struct fw_header *fw_header;
2493    const __le32 *fw_data;
2494    u32 fw_size;
2495    u32 __iomem *load_addr;
2496    char buf[48];
2497    int err = -ENODEV;
2498
2499    if (strcmp(fore200e->bus->model_name, "PCA-200E") == 0)
2500        device = &((struct pci_dev *) fore200e->bus_dev)->dev;
2501#ifdef CONFIG_SBUS
2502    else if (strcmp(fore200e->bus->model_name, "SBA-200E") == 0)
2503        device = &((struct platform_device *) fore200e->bus_dev)->dev;
2504#endif
2505    else
2506        return err;
2507
2508    sprintf(buf, "%s%s", fore200e->bus->proc_name, FW_EXT);
2509    if ((err = request_firmware(&firmware, buf, device)) < 0) {
2510        printk(FORE200E "problem loading firmware image %s\n", fore200e->bus->model_name);
2511        return err;
2512    }
2513
2514    fw_data = (__le32 *) firmware->data;
2515    fw_size = firmware->size / sizeof(u32);
2516    fw_header = (struct fw_header *) firmware->data;
2517    load_addr = fore200e->virt_base + le32_to_cpu(fw_header->load_offset);
2518
2519    DPRINTK(2, "device %s firmware being loaded at 0x%p (%d words)\n",
2520            fore200e->name, load_addr, fw_size);
2521
2522    if (le32_to_cpu(fw_header->magic) != FW_HEADER_MAGIC) {
2523        printk(FORE200E "corrupted %s firmware image\n", fore200e->bus->model_name);
2524        goto release;
2525    }
2526
2527    for (; fw_size--; fw_data++, load_addr++)
2528        fore200e->bus->write(le32_to_cpu(*fw_data), load_addr);
2529
2530    DPRINTK(2, "device %s firmware being started\n", fore200e->name);
2531
2532#if defined(__sparc_v9__)
2533    /* reported to be required by SBA cards on some sparc64 hosts */
2534    fore200e_spin(100);
2535#endif
2536
2537    sprintf(buf, "\rgo %x\r", le32_to_cpu(fw_header->start_offset));
2538    fore200e_monitor_puts(fore200e, buf);
2539
2540    if (fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_CP_RUNNING, 1000) == 0) {
2541        printk(FORE200E "device %s firmware didn't start\n", fore200e->name);
2542        goto release;
2543    }
2544
2545    printk(FORE200E "device %s firmware started\n", fore200e->name);
2546
2547    fore200e->state = FORE200E_STATE_START_FW;
2548    err = 0;
2549
2550release:
2551    release_firmware(firmware);
2552    return err;
2553}
2554
2555
2556static int fore200e_register(struct fore200e *fore200e, struct device *parent)
2557{
2558    struct atm_dev* atm_dev;
2559
2560    DPRINTK(2, "device %s being registered\n", fore200e->name);
2561
2562    atm_dev = atm_dev_register(fore200e->bus->proc_name, parent, &fore200e_ops,
2563                               -1, NULL);
2564    if (atm_dev == NULL) {
2565        printk(FORE200E "unable to register device %s\n", fore200e->name);
2566        return -ENODEV;
2567    }
2568
2569    atm_dev->dev_data = fore200e;
2570    fore200e->atm_dev = atm_dev;
2571
2572    atm_dev->ci_range.vpi_bits = FORE200E_VPI_BITS;
2573    atm_dev->ci_range.vci_bits = FORE200E_VCI_BITS;
2574
2575    fore200e->available_cell_rate = ATM_OC3_PCR;
2576
2577    fore200e->state = FORE200E_STATE_REGISTER;
2578    return 0;
2579}
2580
2581
2582static int fore200e_init(struct fore200e *fore200e, struct device *parent)
2583{
2584    if (fore200e_register(fore200e, parent) < 0)
2585        return -ENODEV;
2586    
2587    if (fore200e->bus->configure(fore200e) < 0)
2588        return -ENODEV;
2589
2590    if (fore200e->bus->map(fore200e) < 0)
2591        return -ENODEV;
2592
2593    if (fore200e_reset(fore200e, 1) < 0)
2594        return -ENODEV;
2595
2596    if (fore200e_load_and_start_fw(fore200e) < 0)
2597        return -ENODEV;
2598
2599    if (fore200e_initialize(fore200e) < 0)
2600        return -ENODEV;
2601
2602    if (fore200e_init_cmd_queue(fore200e) < 0)
2603        return -ENOMEM;
2604
2605    if (fore200e_init_tx_queue(fore200e) < 0)
2606        return -ENOMEM;
2607
2608    if (fore200e_init_rx_queue(fore200e) < 0)
2609        return -ENOMEM;
2610
2611    if (fore200e_init_bs_queue(fore200e) < 0)
2612        return -ENOMEM;
2613
2614    if (fore200e_alloc_rx_buf(fore200e) < 0)
2615        return -ENOMEM;
2616
2617    if (fore200e_get_esi(fore200e) < 0)
2618        return -EIO;
2619
2620    if (fore200e_irq_request(fore200e) < 0)
2621        return -EBUSY;
2622
2623    fore200e_supply(fore200e);
2624
2625    /* all done, board initialization is now complete */
2626    fore200e->state = FORE200E_STATE_COMPLETE;
2627    return 0;
2628}
2629
2630#ifdef CONFIG_SBUS
2631static const struct of_device_id fore200e_sba_match[];
2632static int fore200e_sba_probe(struct platform_device *op)
2633{
2634        const struct of_device_id *match;
2635        const struct fore200e_bus *bus;
2636        struct fore200e *fore200e;
2637        static int index = 0;
2638        int err;
2639
2640        match = of_match_device(fore200e_sba_match, &op->dev);
2641        if (!match)
2642                return -EINVAL;
2643        bus = match->data;
2644
2645        fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL);
2646        if (!fore200e)
2647                return -ENOMEM;
2648
2649        fore200e->bus = bus;
2650        fore200e->bus_dev = op;
2651        fore200e->irq = op->archdata.irqs[0];
2652        fore200e->phys_base = op->resource[0].start;
2653
2654        sprintf(fore200e->name, "%s-%d", bus->model_name, index);
2655
2656        err = fore200e_init(fore200e, &op->dev);
2657        if (err < 0) {
2658                fore200e_shutdown(fore200e);
2659                kfree(fore200e);
2660                return err;
2661        }
2662
2663        index++;
2664        dev_set_drvdata(&op->dev, fore200e);
2665
2666        return 0;
2667}
2668
2669static int fore200e_sba_remove(struct platform_device *op)
2670{
2671        struct fore200e *fore200e = dev_get_drvdata(&op->dev);
2672
2673        fore200e_shutdown(fore200e);
2674        kfree(fore200e);
2675
2676        return 0;
2677}
2678
2679static const struct of_device_id fore200e_sba_match[] = {
2680        {
2681                .name = SBA200E_PROM_NAME,
2682                .data = (void *) &fore200e_bus[1],
2683        },
2684        {},
2685};
2686MODULE_DEVICE_TABLE(of, fore200e_sba_match);
2687
2688static struct platform_driver fore200e_sba_driver = {
2689        .driver = {
2690                .name = "fore_200e",
2691                .of_match_table = fore200e_sba_match,
2692        },
2693        .probe          = fore200e_sba_probe,
2694        .remove         = fore200e_sba_remove,
2695};
2696#endif
2697
2698#ifdef CONFIG_PCI
2699static int fore200e_pca_detect(struct pci_dev *pci_dev,
2700                               const struct pci_device_id *pci_ent)
2701{
2702    const struct fore200e_bus* bus = (struct fore200e_bus*) pci_ent->driver_data;
2703    struct fore200e* fore200e;
2704    int err = 0;
2705    static int index = 0;
2706
2707    if (pci_enable_device(pci_dev)) {
2708        err = -EINVAL;
2709        goto out;
2710    }
2711
2712    if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32))) {
2713        err = -EINVAL;
2714        goto out;
2715    }
2716    
2717    fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL);
2718    if (fore200e == NULL) {
2719        err = -ENOMEM;
2720        goto out_disable;
2721    }
2722
2723    fore200e->bus       = bus;
2724    fore200e->bus_dev   = pci_dev;    
2725    fore200e->irq       = pci_dev->irq;
2726    fore200e->phys_base = pci_resource_start(pci_dev, 0);
2727
2728    sprintf(fore200e->name, "%s-%d", bus->model_name, index - 1);
2729
2730    pci_set_master(pci_dev);
2731
2732    printk(FORE200E "device %s found at 0x%lx, IRQ %s\n",
2733           fore200e->bus->model_name, 
2734           fore200e->phys_base, fore200e_irq_itoa(fore200e->irq));
2735
2736    sprintf(fore200e->name, "%s-%d", bus->model_name, index);
2737
2738    err = fore200e_init(fore200e, &pci_dev->dev);
2739    if (err < 0) {
2740        fore200e_shutdown(fore200e);
2741        goto out_free;
2742    }
2743
2744    ++index;
2745    pci_set_drvdata(pci_dev, fore200e);
2746
2747out:
2748    return err;
2749
2750out_free:
2751    kfree(fore200e);
2752out_disable:
2753    pci_disable_device(pci_dev);
2754    goto out;
2755}
2756
2757
2758static void fore200e_pca_remove_one(struct pci_dev *pci_dev)
2759{
2760    struct fore200e *fore200e;
2761
2762    fore200e = pci_get_drvdata(pci_dev);
2763
2764    fore200e_shutdown(fore200e);
2765    kfree(fore200e);
2766    pci_disable_device(pci_dev);
2767}
2768
2769
2770static struct pci_device_id fore200e_pca_tbl[] = {
2771    { PCI_VENDOR_ID_FORE, PCI_DEVICE_ID_FORE_PCA200E, PCI_ANY_ID, PCI_ANY_ID,
2772      0, 0, (unsigned long) &fore200e_bus[0] },
2773    { 0, }
2774};
2775
2776MODULE_DEVICE_TABLE(pci, fore200e_pca_tbl);
2777
2778static struct pci_driver fore200e_pca_driver = {
2779    .name =     "fore_200e",
2780    .probe =    fore200e_pca_detect,
2781    .remove =   fore200e_pca_remove_one,
2782    .id_table = fore200e_pca_tbl,
2783};
2784#endif
2785
2786static int __init fore200e_module_init(void)
2787{
2788        int err = 0;
2789
2790        printk(FORE200E "FORE Systems 200E-series ATM driver - version " FORE200E_VERSION "\n");
2791
2792#ifdef CONFIG_SBUS
2793        err = platform_driver_register(&fore200e_sba_driver);
2794        if (err)
2795                return err;
2796#endif
2797
2798#ifdef CONFIG_PCI
2799        err = pci_register_driver(&fore200e_pca_driver);
2800#endif
2801
2802#ifdef CONFIG_SBUS
2803        if (err)
2804                platform_driver_unregister(&fore200e_sba_driver);
2805#endif
2806
2807        return err;
2808}
2809
2810static void __exit fore200e_module_cleanup(void)
2811{
2812#ifdef CONFIG_PCI
2813        pci_unregister_driver(&fore200e_pca_driver);
2814#endif
2815#ifdef CONFIG_SBUS
2816        platform_driver_unregister(&fore200e_sba_driver);
2817#endif
2818}
2819
2820static int
2821fore200e_proc_read(struct atm_dev *dev, loff_t* pos, char* page)
2822{
2823    struct fore200e*     fore200e  = FORE200E_DEV(dev);
2824    struct fore200e_vcc* fore200e_vcc;
2825    struct atm_vcc*      vcc;
2826    int                  i, len, left = *pos;
2827    unsigned long        flags;
2828
2829    if (!left--) {
2830
2831        if (fore200e_getstats(fore200e) < 0)
2832            return -EIO;
2833
2834        len = sprintf(page,"\n"
2835                       " device:\n"
2836                       "   internal name:\t\t%s\n", fore200e->name);
2837
2838        /* print bus-specific information */
2839        if (fore200e->bus->proc_read)
2840            len += fore200e->bus->proc_read(fore200e, page + len);
2841        
2842        len += sprintf(page + len,
2843                "   interrupt line:\t\t%s\n"
2844                "   physical base address:\t0x%p\n"
2845                "   virtual base address:\t0x%p\n"
2846                "   factory address (ESI):\t%pM\n"
2847                "   board serial number:\t\t%d\n\n",
2848                fore200e_irq_itoa(fore200e->irq),
2849                (void*)fore200e->phys_base,
2850                fore200e->virt_base,
2851                fore200e->esi,
2852                fore200e->esi[4] * 256 + fore200e->esi[5]);
2853
2854        return len;
2855    }
2856
2857    if (!left--)
2858        return sprintf(page,
2859                       "   free small bufs, scheme 1:\t%d\n"
2860                       "   free large bufs, scheme 1:\t%d\n"
2861                       "   free small bufs, scheme 2:\t%d\n"
2862                       "   free large bufs, scheme 2:\t%d\n",
2863                       fore200e->host_bsq[ BUFFER_SCHEME_ONE ][ BUFFER_MAGN_SMALL ].freebuf_count,
2864                       fore200e->host_bsq[ BUFFER_SCHEME_ONE ][ BUFFER_MAGN_LARGE ].freebuf_count,
2865                       fore200e->host_bsq[ BUFFER_SCHEME_TWO ][ BUFFER_MAGN_SMALL ].freebuf_count,
2866                       fore200e->host_bsq[ BUFFER_SCHEME_TWO ][ BUFFER_MAGN_LARGE ].freebuf_count);
2867
2868    if (!left--) {
2869        u32 hb = fore200e->bus->read(&fore200e->cp_queues->heartbeat);
2870
2871        len = sprintf(page,"\n\n"
2872                      " cell processor:\n"
2873                      "   heartbeat state:\t\t");
2874        
2875        if (hb >> 16 != 0xDEAD)
2876            len += sprintf(page + len, "0x%08x\n", hb);
2877        else
2878            len += sprintf(page + len, "*** FATAL ERROR %04x ***\n", hb & 0xFFFF);
2879
2880        return len;
2881    }
2882
2883    if (!left--) {
2884        static const char* media_name[] = {
2885            "unshielded twisted pair",
2886            "multimode optical fiber ST",
2887            "multimode optical fiber SC",
2888            "single-mode optical fiber ST",
2889            "single-mode optical fiber SC",
2890            "unknown"
2891        };
2892
2893        static const char* oc3_mode[] = {
2894            "normal operation",
2895            "diagnostic loopback",
2896            "line loopback",
2897            "unknown"
2898        };
2899
2900        u32 fw_release     = fore200e->bus->read(&fore200e->cp_queues->fw_release);
2901        u32 mon960_release = fore200e->bus->read(&fore200e->cp_queues->mon960_release);
2902        u32 oc3_revision   = fore200e->bus->read(&fore200e->cp_queues->oc3_revision);
2903        u32 media_index    = FORE200E_MEDIA_INDEX(fore200e->bus->read(&fore200e->cp_queues->media_type));
2904        u32 oc3_index;
2905
2906        if (media_index > 4)
2907                media_index = 5;
2908        
2909        switch (fore200e->loop_mode) {
2910            case ATM_LM_NONE:    oc3_index = 0;
2911                                 break;
2912            case ATM_LM_LOC_PHY: oc3_index = 1;
2913                                 break;
2914            case ATM_LM_RMT_PHY: oc3_index = 2;
2915                                 break;
2916            default:             oc3_index = 3;
2917        }
2918
2919        return sprintf(page,
2920                       "   firmware release:\t\t%d.%d.%d\n"
2921                       "   monitor release:\t\t%d.%d\n"
2922                       "   media type:\t\t\t%s\n"
2923                       "   OC-3 revision:\t\t0x%x\n"
2924                       "   OC-3 mode:\t\t\t%s",
2925                       fw_release >> 16, fw_release << 16 >> 24,  fw_release << 24 >> 24,
2926                       mon960_release >> 16, mon960_release << 16 >> 16,
2927                       media_name[ media_index ],
2928                       oc3_revision,
2929                       oc3_mode[ oc3_index ]);
2930    }
2931
2932    if (!left--) {
2933        struct cp_monitor __iomem * cp_monitor = fore200e->cp_monitor;
2934
2935        return sprintf(page,
2936                       "\n\n"
2937                       " monitor:\n"
2938                       "   version number:\t\t%d\n"
2939                       "   boot status word:\t\t0x%08x\n",
2940                       fore200e->bus->read(&cp_monitor->mon_version),
2941                       fore200e->bus->read(&cp_monitor->bstat));
2942    }
2943
2944    if (!left--)
2945        return sprintf(page,
2946                       "\n"
2947                       " device statistics:\n"
2948                       "  4b5b:\n"
2949                       "     crc_header_errors:\t\t%10u\n"
2950                       "     framing_errors:\t\t%10u\n",
2951                       be32_to_cpu(fore200e->stats->phy.crc_header_errors),
2952                       be32_to_cpu(fore200e->stats->phy.framing_errors));
2953    
2954    if (!left--)
2955        return sprintf(page, "\n"
2956                       "  OC-3:\n"
2957                       "     section_bip8_errors:\t%10u\n"
2958                       "     path_bip8_errors:\t\t%10u\n"
2959                       "     line_bip24_errors:\t\t%10u\n"
2960                       "     line_febe_errors:\t\t%10u\n"
2961                       "     path_febe_errors:\t\t%10u\n"
2962                       "     corr_hcs_errors:\t\t%10u\n"
2963                       "     ucorr_hcs_errors:\t\t%10u\n",
2964                       be32_to_cpu(fore200e->stats->oc3.section_bip8_errors),
2965                       be32_to_cpu(fore200e->stats->oc3.path_bip8_errors),
2966                       be32_to_cpu(fore200e->stats->oc3.line_bip24_errors),
2967                       be32_to_cpu(fore200e->stats->oc3.line_febe_errors),
2968                       be32_to_cpu(fore200e->stats->oc3.path_febe_errors),
2969                       be32_to_cpu(fore200e->stats->oc3.corr_hcs_errors),
2970                       be32_to_cpu(fore200e->stats->oc3.ucorr_hcs_errors));
2971
2972    if (!left--)
2973        return sprintf(page,"\n"
2974                       "   ATM:\t\t\t\t     cells\n"
2975                       "     TX:\t\t\t%10u\n"
2976                       "     RX:\t\t\t%10u\n"
2977                       "     vpi out of range:\t\t%10u\n"
2978                       "     vpi no conn:\t\t%10u\n"
2979                       "     vci out of range:\t\t%10u\n"
2980                       "     vci no conn:\t\t%10u\n",
2981                       be32_to_cpu(fore200e->stats->atm.cells_transmitted),
2982                       be32_to_cpu(fore200e->stats->atm.cells_received),
2983                       be32_to_cpu(fore200e->stats->atm.vpi_bad_range),
2984                       be32_to_cpu(fore200e->stats->atm.vpi_no_conn),
2985                       be32_to_cpu(fore200e->stats->atm.vci_bad_range),
2986                       be32_to_cpu(fore200e->stats->atm.vci_no_conn));
2987    
2988    if (!left--)
2989        return sprintf(page,"\n"
2990                       "   AAL0:\t\t\t     cells\n"
2991                       "     TX:\t\t\t%10u\n"
2992                       "     RX:\t\t\t%10u\n"
2993                       "     dropped:\t\t\t%10u\n",
2994                       be32_to_cpu(fore200e->stats->aal0.cells_transmitted),
2995                       be32_to_cpu(fore200e->stats->aal0.cells_received),
2996                       be32_to_cpu(fore200e->stats->aal0.cells_dropped));
2997    
2998    if (!left--)
2999        return sprintf(page,"\n"
3000                       "   AAL3/4:\n"
3001                       "     SAR sublayer:\t\t     cells\n"
3002                       "       TX:\t\t\t%10u\n"
3003                       "       RX:\t\t\t%10u\n"
3004                       "       dropped:\t\t\t%10u\n"
3005                       "       CRC errors:\t\t%10u\n"
3006                       "       protocol errors:\t\t%10u\n\n"
3007                       "     CS  sublayer:\t\t      PDUs\n"
3008                       "       TX:\t\t\t%10u\n"
3009                       "       RX:\t\t\t%10u\n"
3010                       "       dropped:\t\t\t%10u\n"
3011                       "       protocol errors:\t\t%10u\n",
3012                       be32_to_cpu(fore200e->stats->aal34.cells_transmitted),
3013                       be32_to_cpu(fore200e->stats->aal34.cells_received),
3014                       be32_to_cpu(fore200e->stats->aal34.cells_dropped),
3015                       be32_to_cpu(fore200e->stats->aal34.cells_crc_errors),
3016                       be32_to_cpu(fore200e->stats->aal34.cells_protocol_errors),
3017                       be32_to_cpu(fore200e->stats->aal34.cspdus_transmitted),
3018                       be32_to_cpu(fore200e->stats->aal34.cspdus_received),
3019                       be32_to_cpu(fore200e->stats->aal34.cspdus_dropped),
3020                       be32_to_cpu(fore200e->stats->aal34.cspdus_protocol_errors));
3021    
3022    if (!left--)
3023        return sprintf(page,"\n"
3024                       "   AAL5:\n"
3025                       "     SAR sublayer:\t\t     cells\n"
3026                       "       TX:\t\t\t%10u\n"
3027                       "       RX:\t\t\t%10u\n"
3028                       "       dropped:\t\t\t%10u\n"
3029                       "       congestions:\t\t%10u\n\n"
3030                       "     CS  sublayer:\t\t      PDUs\n"
3031                       "       TX:\t\t\t%10u\n"
3032                       "       RX:\t\t\t%10u\n"
3033                       "       dropped:\t\t\t%10u\n"
3034                       "       CRC errors:\t\t%10u\n"
3035                       "       protocol errors:\t\t%10u\n",
3036                       be32_to_cpu(fore200e->stats->aal5.cells_transmitted),
3037                       be32_to_cpu(fore200e->stats->aal5.cells_received),
3038                       be32_to_cpu(fore200e->stats->aal5.cells_dropped),
3039                       be32_to_cpu(fore200e->stats->aal5.congestion_experienced),
3040                       be32_to_cpu(fore200e->stats->aal5.cspdus_transmitted),
3041                       be32_to_cpu(fore200e->stats->aal5.cspdus_received),
3042                       be32_to_cpu(fore200e->stats->aal5.cspdus_dropped),
3043                       be32_to_cpu(fore200e->stats->aal5.cspdus_crc_errors),
3044                       be32_to_cpu(fore200e->stats->aal5.cspdus_protocol_errors));
3045    
3046    if (!left--)
3047        return sprintf(page,"\n"
3048                       "   AUX:\t\t       allocation failures\n"
3049                       "     small b1:\t\t\t%10u\n"
3050                       "     large b1:\t\t\t%10u\n"
3051                       "     small b2:\t\t\t%10u\n"
3052                       "     large b2:\t\t\t%10u\n"
3053                       "     RX PDUs:\t\t\t%10u\n"
3054                       "     TX PDUs:\t\t\t%10lu\n",
3055                       be32_to_cpu(fore200e->stats->aux.small_b1_failed),
3056                       be32_to_cpu(fore200e->stats->aux.large_b1_failed),
3057                       be32_to_cpu(fore200e->stats->aux.small_b2_failed),
3058                       be32_to_cpu(fore200e->stats->aux.large_b2_failed),
3059                       be32_to_cpu(fore200e->stats->aux.rpd_alloc_failed),
3060                       fore200e->tx_sat);
3061    
3062    if (!left--)
3063        return sprintf(page,"\n"
3064                       " receive carrier:\t\t\t%s\n",
3065                       fore200e->stats->aux.receive_carrier ? "ON" : "OFF!");
3066    
3067    if (!left--) {
3068        return sprintf(page,"\n"
3069                       " VCCs:\n  address   VPI VCI   AAL "
3070                       "TX PDUs   TX min/max size  RX PDUs   RX min/max size\n");
3071    }
3072
3073    for (i = 0; i < NBR_CONNECT; i++) {
3074
3075        vcc = fore200e->vc_map[i].vcc;
3076
3077        if (vcc == NULL)
3078            continue;
3079
3080        spin_lock_irqsave(&fore200e->q_lock, flags);
3081
3082        if (vcc && test_bit(ATM_VF_READY, &vcc->flags) && !left--) {
3083
3084            fore200e_vcc = FORE200E_VCC(vcc);
3085            ASSERT(fore200e_vcc);
3086
3087            len = sprintf(page,
3088                          "  %08x  %03d %05d %1d   %09lu %05d/%05d      %09lu %05d/%05d\n",
3089                          (u32)(unsigned long)vcc,
3090                          vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal),
3091                          fore200e_vcc->tx_pdu,
3092                          fore200e_vcc->tx_min_pdu > 0xFFFF ? 0 : fore200e_vcc->tx_min_pdu,
3093                          fore200e_vcc->tx_max_pdu,
3094                          fore200e_vcc->rx_pdu,
3095                          fore200e_vcc->rx_min_pdu > 0xFFFF ? 0 : fore200e_vcc->rx_min_pdu,
3096                          fore200e_vcc->rx_max_pdu);
3097
3098            spin_unlock_irqrestore(&fore200e->q_lock, flags);
3099            return len;
3100        }
3101
3102        spin_unlock_irqrestore(&fore200e->q_lock, flags);
3103    }
3104    
3105    return 0;
3106}
3107
3108module_init(fore200e_module_init);
3109module_exit(fore200e_module_cleanup);
3110
3111
3112static const struct atmdev_ops fore200e_ops =
3113{
3114        .open       = fore200e_open,
3115        .close      = fore200e_close,
3116        .ioctl      = fore200e_ioctl,
3117        .getsockopt = fore200e_getsockopt,
3118        .setsockopt = fore200e_setsockopt,
3119        .send       = fore200e_send,
3120        .change_qos = fore200e_change_qos,
3121        .proc_read  = fore200e_proc_read,
3122        .owner      = THIS_MODULE
3123};
3124
3125
3126static const struct fore200e_bus fore200e_bus[] = {
3127#ifdef CONFIG_PCI
3128    { "PCA-200E", "pca200e", 32, 4, 32, 
3129      fore200e_pca_read,
3130      fore200e_pca_write,
3131      fore200e_pca_dma_map,
3132      fore200e_pca_dma_unmap,
3133      fore200e_pca_dma_sync_for_cpu,
3134      fore200e_pca_dma_sync_for_device,
3135      fore200e_pca_dma_chunk_alloc,
3136      fore200e_pca_dma_chunk_free,
3137      fore200e_pca_configure,
3138      fore200e_pca_map,
3139      fore200e_pca_reset,
3140      fore200e_pca_prom_read,
3141      fore200e_pca_unmap,
3142      NULL,
3143      fore200e_pca_irq_check,
3144      fore200e_pca_irq_ack,
3145      fore200e_pca_proc_read,
3146    },
3147#endif
3148#ifdef CONFIG_SBUS
3149    { "SBA-200E", "sba200e", 32, 64, 32,
3150      fore200e_sba_read,
3151      fore200e_sba_write,
3152      fore200e_sba_dma_map,
3153      fore200e_sba_dma_unmap,
3154      fore200e_sba_dma_sync_for_cpu,
3155      fore200e_sba_dma_sync_for_device,
3156      fore200e_sba_dma_chunk_alloc,
3157      fore200e_sba_dma_chunk_free,
3158      fore200e_sba_configure,
3159      fore200e_sba_map,
3160      fore200e_sba_reset,
3161      fore200e_sba_prom_read,
3162      fore200e_sba_unmap,
3163      fore200e_sba_irq_enable,
3164      fore200e_sba_irq_check,
3165      fore200e_sba_irq_ack,
3166      fore200e_sba_proc_read,
3167    },
3168#endif
3169    {}
3170};
3171
3172MODULE_LICENSE("GPL");
3173#ifdef CONFIG_PCI
3174#ifdef __LITTLE_ENDIAN__
3175MODULE_FIRMWARE("pca200e.bin");
3176#else
3177MODULE_FIRMWARE("pca200e_ecd.bin2");
3178#endif
3179#endif /* CONFIG_PCI */
3180#ifdef CONFIG_SBUS
3181MODULE_FIRMWARE("sba200e_ecd.bin2");
3182#endif
3183