LXR linux/drivers/clocksource/asm9260

   1/*
   2 * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
   3 *
   4 * This program is free software; you can redistribute it and/or
   5 * modify it under the terms of the GNU General Public License
   6 * as published by the Free Software Foundation; either version 2
   7 * of the License, or (at your option) any later version.
   8 */
   9
  10#include <linux/kernel.h>
  11#include <linux/init.h>
  12#include <linux/interrupt.h>
  13#include <linux/sched.h>
  14#include <linux/clk.h>
  15#include <linux/clocksource.h>
  16#include <linux/clockchips.h>
  17#include <linux/io.h>
  18#include <linux/of.h>
  19#include <linux/of_address.h>
  20#include <linux/of_irq.h>
  21#include <linux/bitops.h>
  22
  23#define DRIVER_NAME     "asm9260-timer"
  24
  25/*
  26 * this device provide 4 offsets for each register:
  27 * 0x0 - plain read write mode
  28 * 0x4 - set mode, OR logic.
  29 * 0x8 - clr mode, XOR logic.
  30 * 0xc - togle mode.
  31 */
  32#define SET_REG 4
  33#define CLR_REG 8
  34
  35#define HW_IR           0x0000 /* RW. Interrupt */
  36#define BM_IR_CR0       BIT(4)
  37#define BM_IR_MR3       BIT(3)
  38#define BM_IR_MR2       BIT(2)
  39#define BM_IR_MR1       BIT(1)
  40#define BM_IR_MR0       BIT(0)
  41
  42#define HW_TCR          0x0010 /* RW. Timer controller */
  43/* BM_C*_RST
  44 * Timer Counter and the Prescale Counter are synchronously reset on the
  45 * next positive edge of PCLK. The counters remain reset until TCR[1] is
  46 * returned to zero. */
  47#define BM_C3_RST       BIT(7)
  48#define BM_C2_RST       BIT(6)
  49#define BM_C1_RST       BIT(5)
  50#define BM_C0_RST       BIT(4)
  51/* BM_C*_EN
  52 * 1 - Timer Counter and Prescale Counter are enabled for counting
  53 * 0 - counters are disabled */
  54#define BM_C3_EN        BIT(3)
  55#define BM_C2_EN        BIT(2)
  56#define BM_C1_EN        BIT(1)
  57#define BM_C0_EN        BIT(0)
  58
  59#define HW_DIR          0x0020 /* RW. Direction? */
  60/* 00 - count up
  61 * 01 - count down
  62 * 10 - ?? 2^n/2 */
  63#define BM_DIR_COUNT_UP         0
  64#define BM_DIR_COUNT_DOWN       1
  65#define BM_DIR0_SHIFT   0
  66#define BM_DIR1_SHIFT   4
  67#define BM_DIR2_SHIFT   8
  68#define BM_DIR3_SHIFT   12
  69#define BM_DIR_DEFAULT          (BM_DIR_COUNT_UP << BM_DIR0_SHIFT | \
  70                                 BM_DIR_COUNT_UP << BM_DIR1_SHIFT | \
  71                                 BM_DIR_COUNT_UP << BM_DIR2_SHIFT | \
  72                                 BM_DIR_COUNT_UP << BM_DIR3_SHIFT)
  73
  74#define HW_TC0          0x0030 /* RO. Timer counter 0 */
  75/* HW_TC*. Timer counter owerflow (0xffff.ffff to 0x0000.0000) do not generate
  76 * interrupt. This registers can be used to detect overflow */
  77#define HW_TC1          0x0040
  78#define HW_TC2          0x0050
  79#define HW_TC3          0x0060
  80
  81#define HW_PR           0x0070 /* RW. prescaler */
  82#define BM_PR_DISABLE   0
  83#define HW_PC           0x0080 /* RO. Prescaler counter */
  84#define HW_MCR          0x0090 /* RW. Match control */
  85/* enable interrupt on match */
  86#define BM_MCR_INT_EN(n)        (1 << (n * 3 + 0))
  87/* enable TC reset on match */
  88#define BM_MCR_RES_EN(n)        (1 << (n * 3 + 1))
  89/* enable stop TC on match */
  90#define BM_MCR_STOP_EN(n)       (1 << (n * 3 + 2))
  91
  92#define HW_MR0          0x00a0 /* RW. Match reg */
  93#define HW_MR1          0x00b0
  94#define HW_MR2          0x00C0
  95#define HW_MR3          0x00D0
  96
  97#define HW_CTCR         0x0180 /* Counter control */
  98#define BM_CTCR0_SHIFT  0
  99#define BM_CTCR1_SHIFT  2
 100#define BM_CTCR2_SHIFT  4
 101#define BM_CTCR3_SHIFT  6
 102#define BM_CTCR_TM      0       /* Timer mode. Every rising PCLK edge. */
 103#define BM_CTCR_DEFAULT (BM_CTCR_TM << BM_CTCR0_SHIFT | \
 104                         BM_CTCR_TM << BM_CTCR1_SHIFT | \
 105                         BM_CTCR_TM << BM_CTCR2_SHIFT | \
 106                         BM_CTCR_TM << BM_CTCR3_SHIFT)
 107
 108static struct asm9260_timer_priv {
 109        void __iomem *base;
 110        unsigned long ticks_per_jiffy;
 111} priv;
 112
 113static int asm9260_timer_set_next_event(unsigned long delta,
 114                                         struct clock_event_device *evt)
 115{
 116        /* configure match count for TC0 */
 117        writel_relaxed(delta, priv.base + HW_MR0);
 118        /* enable TC0 */
 119        writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
 120        return 0;
 121}
 122
 123static inline void __asm9260_timer_shutdown(struct clock_event_device *evt)
 124{
 125        /* stop timer0 */
 126        writel_relaxed(BM_C0_EN, priv.base + HW_TCR + CLR_REG);
 127}
 128
 129static int asm9260_timer_shutdown(struct clock_event_device *evt)
 130{
 131        __asm9260_timer_shutdown(evt);
 132        return 0;
 133}
 134
 135static int asm9260_timer_set_oneshot(struct clock_event_device *evt)
 136{
 137        __asm9260_timer_shutdown(evt);
 138
 139        /* enable reset and stop on match */
 140        writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
 141                       priv.base + HW_MCR + SET_REG);
 142        return 0;
 143}
 144
 145static int asm9260_timer_set_periodic(struct clock_event_device *evt)
 146{
 147        __asm9260_timer_shutdown(evt);
 148
 149        /* disable reset and stop on match */
 150        writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
 151                       priv.base + HW_MCR + CLR_REG);
 152        /* configure match count for TC0 */
 153        writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
 154        /* enable TC0 */
 155        writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
 156        return 0;
 157}
 158
 159static struct clock_event_device event_dev = {
 160        .name                   = DRIVER_NAME,
 161        .rating                 = 200,
 162        .features               = CLOCK_EVT_FEAT_PERIODIC |
 163                                  CLOCK_EVT_FEAT_ONESHOT,
 164        .set_next_event         = asm9260_timer_set_next_event,
 165        .set_state_shutdown     = asm9260_timer_shutdown,
 166        .set_state_periodic     = asm9260_timer_set_periodic,
 167        .set_state_oneshot      = asm9260_timer_set_oneshot,
 168        .tick_resume            = asm9260_timer_shutdown,
 169};
 170
 171static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
 172{
 173        struct clock_event_device *evt = dev_id;
 174
 175        evt->event_handler(evt);
 176
 177        writel_relaxed(BM_IR_MR0, priv.base + HW_IR);
 178
 179        return IRQ_HANDLED;
 180}
 181
 182/*
 183 * ---------------------------------------------------------------------------
 184 * Timer initialization
 185 * ---------------------------------------------------------------------------
 186 */
 187static void __init asm9260_timer_init(struct device_node *np)
 188{
 189        int irq;
 190        struct clk *clk;
 191        int ret;
 192        unsigned long rate;
 193
 194        priv.base = of_io_request_and_map(np, 0, np->name);
 195        if (IS_ERR(priv.base))
 196                panic("%s: unable to map resource", np->name);
 197
 198        clk = of_clk_get(np, 0);
 199
 200        ret = clk_prepare_enable(clk);
 201        if (ret)
 202                panic("Failed to enable clk!\n");
 203
 204        irq = irq_of_parse_and_map(np, 0);
 205        ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
 206                        DRIVER_NAME, &event_dev);
 207        if (ret)
 208                panic("Failed to setup irq!\n");
 209
 210        /* set all timers for count-up */
 211        writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
 212        /* disable divider */
 213        writel_relaxed(BM_PR_DISABLE, priv.base + HW_PR);
 214        /* make sure all timers use every rising PCLK edge. */
 215        writel_relaxed(BM_CTCR_DEFAULT, priv.base + HW_CTCR);
 216        /* enable interrupt for TC0 and clean setting for all other lines */
 217        writel_relaxed(BM_MCR_INT_EN(0) , priv.base + HW_MCR);
 218
 219        rate = clk_get_rate(clk);
 220        clocksource_mmio_init(priv.base + HW_TC1, DRIVER_NAME, rate,
 221                        200, 32, clocksource_mmio_readl_up);
 222
 223        /* Seems like we can't use counter without match register even if
 224         * actions for MR are disabled. So, set MR to max value. */
 225        writel_relaxed(0xffffffff, priv.base + HW_MR1);
 226        /* enable TC1 */
 227        writel_relaxed(BM_C1_EN, priv.base + HW_TCR + SET_REG);
 228
 229        priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
 230        event_dev.cpumask = cpumask_of(0);
 231        clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
 232}
 233CLOCKSOURCE_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
 234                asm9260_timer_init);
 235