LXR linux/drivers/media/dvb-frontends/drxk.h

   1#ifndef _DRXK_H_
   2#define _DRXK_H_
   3
   4#include <linux/kconfig.h>
   5#include <linux/types.h>
   6#include <linux/i2c.h>
   7
   8/**
   9 * struct drxk_config - Configure the initial parameters for DRX-K
  10 *
  11 * @adr:                I2C address of the DRX-K
  12 * @parallel_ts:        True means that the device uses parallel TS,
  13 *                      Serial otherwise.
  14 * @dynamic_clk:        True means that the clock will be dynamically
  15 *                      adjusted. Static clock otherwise.
  16 * @enable_merr_cfg:    Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG.
  17 * @single_master:      Device is on the single master mode
  18 * @no_i2c_bridge:      Don't switch the I2C bridge to talk with tuner
  19 * @antenna_gpio:       GPIO bit used to control the antenna
  20 * @antenna_dvbt:       GPIO bit for changing antenna to DVB-C. A value of 1
  21 *                      means that 1=DVBC, 0 = DVBT. Zero means the opposite.
  22 * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength.
  23 * @microcode_name:     Name of the firmware file with the microcode
  24 * @qam_demod_parameter_count:  The number of parameters used for the command
  25 *                              to set the demodulator parameters. All
  26 *                              firmwares are using the 2-parameter commmand.
  27 *                              An exception is the "drxk_a3.mc" firmware,
  28 *                              which uses the 4-parameter command.
  29 *                              A value of 0 (default) or lower indicates that
  30 *                              the correct number of parameters will be
  31 *                              automatically detected.
  32 *
  33 * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
  34 * UIO-3.
  35 */
  36struct drxk_config {
  37        u8      adr;
  38        bool    single_master;
  39        bool    no_i2c_bridge;
  40        bool    parallel_ts;
  41        bool    dynamic_clk;
  42        bool    enable_merr_cfg;
  43
  44        bool    antenna_dvbt;
  45        u16     antenna_gpio;
  46
  47        u8      mpeg_out_clk_strength;
  48        int     chunk_size;
  49
  50        const char      *microcode_name;
  51        int              qam_demod_parameter_count;
  52};
  53
  54#if IS_REACHABLE(CONFIG_DVB_DRXK)
  55extern struct dvb_frontend *drxk_attach(const struct drxk_config *config,
  56                                        struct i2c_adapter *i2c);
  57#else
  58static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config,
  59                                        struct i2c_adapter *i2c)
  60{
  61        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
  62        return NULL;
  63}
  64#endif
  65
  66#endif
  67