linux/drivers/scsi/sym53c8xx_2/sym_hipd.c
<<
>>
Prefs
   1/*
   2 * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family 
   3 * of PCI-SCSI IO processors.
   4 *
   5 * Copyright (C) 1999-2001  Gerard Roudier <groudier@free.fr>
   6 * Copyright (c) 2003-2005  Matthew Wilcox <matthew@wil.cx>
   7 *
   8 * This driver is derived from the Linux sym53c8xx driver.
   9 * Copyright (C) 1998-2000  Gerard Roudier
  10 *
  11 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 
  12 * a port of the FreeBSD ncr driver to Linux-1.2.13.
  13 *
  14 * The original ncr driver has been written for 386bsd and FreeBSD by
  15 *         Wolfgang Stanglmeier        <wolf@cologne.de>
  16 *         Stefan Esser                <se@mi.Uni-Koeln.de>
  17 * Copyright (C) 1994  Wolfgang Stanglmeier
  18 *
  19 * Other major contributions:
  20 *
  21 * NVRAM detection and reading.
  22 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
  23 *
  24 *-----------------------------------------------------------------------------
  25 *
  26 * This program is free software; you can redistribute it and/or modify
  27 * it under the terms of the GNU General Public License as published by
  28 * the Free Software Foundation; either version 2 of the License, or
  29 * (at your option) any later version.
  30 *
  31 * This program is distributed in the hope that it will be useful,
  32 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  33 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  34 * GNU General Public License for more details.
  35 *
  36 * You should have received a copy of the GNU General Public License
  37 * along with this program; if not, write to the Free Software
  38 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  39 */
  40
  41#include <linux/slab.h>
  42#include <asm/param.h>          /* for timeouts in units of HZ */
  43
  44#include "sym_glue.h"
  45#include "sym_nvram.h"
  46
  47#if 0
  48#define SYM_DEBUG_GENERIC_SUPPORT
  49#endif
  50
  51/*
  52 *  Needed function prototypes.
  53 */
  54static void sym_int_ma (struct sym_hcb *np);
  55static void sym_int_sir(struct sym_hcb *);
  56static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np);
  57static struct sym_ccb *sym_ccb_from_dsa(struct sym_hcb *np, u32 dsa);
  58static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln);
  59static void sym_complete_error (struct sym_hcb *np, struct sym_ccb *cp);
  60static void sym_complete_ok (struct sym_hcb *np, struct sym_ccb *cp);
  61static int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp);
  62
  63/*
  64 *  Print a buffer in hexadecimal format with a ".\n" at end.
  65 */
  66static void sym_printl_hex(u_char *p, int n)
  67{
  68        while (n-- > 0)
  69                printf (" %x", *p++);
  70        printf (".\n");
  71}
  72
  73static void sym_print_msg(struct sym_ccb *cp, char *label, u_char *msg)
  74{
  75        sym_print_addr(cp->cmd, "%s: ", label);
  76
  77        spi_print_msg(msg);
  78        printf("\n");
  79}
  80
  81static void sym_print_nego_msg(struct sym_hcb *np, int target, char *label, u_char *msg)
  82{
  83        struct sym_tcb *tp = &np->target[target];
  84        dev_info(&tp->starget->dev, "%s: ", label);
  85
  86        spi_print_msg(msg);
  87        printf("\n");
  88}
  89
  90/*
  91 *  Print something that tells about extended errors.
  92 */
  93void sym_print_xerr(struct scsi_cmnd *cmd, int x_status)
  94{
  95        if (x_status & XE_PARITY_ERR) {
  96                sym_print_addr(cmd, "unrecovered SCSI parity error.\n");
  97        }
  98        if (x_status & XE_EXTRA_DATA) {
  99                sym_print_addr(cmd, "extraneous data discarded.\n");
 100        }
 101        if (x_status & XE_BAD_PHASE) {
 102                sym_print_addr(cmd, "illegal scsi phase (4/5).\n");
 103        }
 104        if (x_status & XE_SODL_UNRUN) {
 105                sym_print_addr(cmd, "ODD transfer in DATA OUT phase.\n");
 106        }
 107        if (x_status & XE_SWIDE_OVRUN) {
 108                sym_print_addr(cmd, "ODD transfer in DATA IN phase.\n");
 109        }
 110}
 111
 112/*
 113 *  Return a string for SCSI BUS mode.
 114 */
 115static char *sym_scsi_bus_mode(int mode)
 116{
 117        switch(mode) {
 118        case SMODE_HVD: return "HVD";
 119        case SMODE_SE:  return "SE";
 120        case SMODE_LVD: return "LVD";
 121        }
 122        return "??";
 123}
 124
 125/*
 126 *  Soft reset the chip.
 127 *
 128 *  Raising SRST when the chip is running may cause 
 129 *  problems on dual function chips (see below).
 130 *  On the other hand, LVD devices need some delay 
 131 *  to settle and report actual BUS mode in STEST4.
 132 */
 133static void sym_chip_reset (struct sym_hcb *np)
 134{
 135        OUTB(np, nc_istat, SRST);
 136        INB(np, nc_mbox1);
 137        udelay(10);
 138        OUTB(np, nc_istat, 0);
 139        INB(np, nc_mbox1);
 140        udelay(2000);   /* For BUS MODE to settle */
 141}
 142
 143/*
 144 *  Really soft reset the chip.:)
 145 *
 146 *  Some 896 and 876 chip revisions may hang-up if we set 
 147 *  the SRST (soft reset) bit at the wrong time when SCRIPTS 
 148 *  are running.
 149 *  So, we need to abort the current operation prior to 
 150 *  soft resetting the chip.
 151 */
 152static void sym_soft_reset (struct sym_hcb *np)
 153{
 154        u_char istat = 0;
 155        int i;
 156
 157        if (!(np->features & FE_ISTAT1) || !(INB(np, nc_istat1) & SCRUN))
 158                goto do_chip_reset;
 159
 160        OUTB(np, nc_istat, CABRT);
 161        for (i = 100000 ; i ; --i) {
 162                istat = INB(np, nc_istat);
 163                if (istat & SIP) {
 164                        INW(np, nc_sist);
 165                }
 166                else if (istat & DIP) {
 167                        if (INB(np, nc_dstat) & ABRT)
 168                                break;
 169                }
 170                udelay(5);
 171        }
 172        OUTB(np, nc_istat, 0);
 173        if (!i)
 174                printf("%s: unable to abort current chip operation, "
 175                       "ISTAT=0x%02x.\n", sym_name(np), istat);
 176do_chip_reset:
 177        sym_chip_reset(np);
 178}
 179
 180/*
 181 *  Start reset process.
 182 *
 183 *  The interrupt handler will reinitialize the chip.
 184 */
 185static void sym_start_reset(struct sym_hcb *np)
 186{
 187        sym_reset_scsi_bus(np, 1);
 188}
 189 
 190int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int)
 191{
 192        u32 term;
 193        int retv = 0;
 194
 195        sym_soft_reset(np);     /* Soft reset the chip */
 196        if (enab_int)
 197                OUTW(np, nc_sien, RST);
 198        /*
 199         *  Enable Tolerant, reset IRQD if present and 
 200         *  properly set IRQ mode, prior to resetting the bus.
 201         */
 202        OUTB(np, nc_stest3, TE);
 203        OUTB(np, nc_dcntl, (np->rv_dcntl & IRQM));
 204        OUTB(np, nc_scntl1, CRST);
 205        INB(np, nc_mbox1);
 206        udelay(200);
 207
 208        if (!SYM_SETUP_SCSI_BUS_CHECK)
 209                goto out;
 210        /*
 211         *  Check for no terminators or SCSI bus shorts to ground.
 212         *  Read SCSI data bus, data parity bits and control signals.
 213         *  We are expecting RESET to be TRUE and other signals to be 
 214         *  FALSE.
 215         */
 216        term =  INB(np, nc_sstat0);
 217        term =  ((term & 2) << 7) + ((term & 1) << 17); /* rst sdp0 */
 218        term |= ((INB(np, nc_sstat2) & 0x01) << 26) |   /* sdp1     */
 219                ((INW(np, nc_sbdl) & 0xff)   << 9)  |   /* d7-0     */
 220                ((INW(np, nc_sbdl) & 0xff00) << 10) |   /* d15-8    */
 221                INB(np, nc_sbcl);       /* req ack bsy sel atn msg cd io    */
 222
 223        if (!np->maxwide)
 224                term &= 0x3ffff;
 225
 226        if (term != (2<<7)) {
 227                printf("%s: suspicious SCSI data while resetting the BUS.\n",
 228                        sym_name(np));
 229                printf("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = "
 230                        "0x%lx, expecting 0x%lx\n",
 231                        sym_name(np),
 232                        (np->features & FE_WIDE) ? "dp1,d15-8," : "",
 233                        (u_long)term, (u_long)(2<<7));
 234                if (SYM_SETUP_SCSI_BUS_CHECK == 1)
 235                        retv = 1;
 236        }
 237out:
 238        OUTB(np, nc_scntl1, 0);
 239        return retv;
 240}
 241
 242/*
 243 *  Select SCSI clock frequency
 244 */
 245static void sym_selectclock(struct sym_hcb *np, u_char scntl3)
 246{
 247        /*
 248         *  If multiplier not present or not selected, leave here.
 249         */
 250        if (np->multiplier <= 1) {
 251                OUTB(np, nc_scntl3, scntl3);
 252                return;
 253        }
 254
 255        if (sym_verbose >= 2)
 256                printf ("%s: enabling clock multiplier\n", sym_name(np));
 257
 258        OUTB(np, nc_stest1, DBLEN);        /* Enable clock multiplier */
 259        /*
 260         *  Wait for the LCKFRQ bit to be set if supported by the chip.
 261         *  Otherwise wait 50 micro-seconds (at least).
 262         */
 263        if (np->features & FE_LCKFRQ) {
 264                int i = 20;
 265                while (!(INB(np, nc_stest4) & LCKFRQ) && --i > 0)
 266                        udelay(20);
 267                if (!i)
 268                        printf("%s: the chip cannot lock the frequency\n",
 269                                sym_name(np));
 270        } else {
 271                INB(np, nc_mbox1);
 272                udelay(50+10);
 273        }
 274        OUTB(np, nc_stest3, HSC);               /* Halt the scsi clock  */
 275        OUTB(np, nc_scntl3, scntl3);
 276        OUTB(np, nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier  */
 277        OUTB(np, nc_stest3, 0x00);              /* Restart scsi clock   */
 278}
 279
 280
 281/*
 282 *  Determine the chip's clock frequency.
 283 *
 284 *  This is essential for the negotiation of the synchronous 
 285 *  transfer rate.
 286 *
 287 *  Note: we have to return the correct value.
 288 *  THERE IS NO SAFE DEFAULT VALUE.
 289 *
 290 *  Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock.
 291 *  53C860 and 53C875 rev. 1 support fast20 transfers but 
 292 *  do not have a clock doubler and so are provided with a 
 293 *  80 MHz clock. All other fast20 boards incorporate a doubler 
 294 *  and so should be delivered with a 40 MHz clock.
 295 *  The recent fast40 chips (895/896/895A/1010) use a 40 Mhz base 
 296 *  clock and provide a clock quadrupler (160 Mhz).
 297 */
 298
 299/*
 300 *  calculate SCSI clock frequency (in KHz)
 301 */
 302static unsigned getfreq (struct sym_hcb *np, int gen)
 303{
 304        unsigned int ms = 0;
 305        unsigned int f;
 306
 307        /*
 308         * Measure GEN timer delay in order 
 309         * to calculate SCSI clock frequency
 310         *
 311         * This code will never execute too
 312         * many loop iterations (if DELAY is 
 313         * reasonably correct). It could get
 314         * too low a delay (too high a freq.)
 315         * if the CPU is slow executing the 
 316         * loop for some reason (an NMI, for
 317         * example). For this reason we will
 318         * if multiple measurements are to be 
 319         * performed trust the higher delay 
 320         * (lower frequency returned).
 321         */
 322        OUTW(np, nc_sien, 0);   /* mask all scsi interrupts */
 323        INW(np, nc_sist);       /* clear pending scsi interrupt */
 324        OUTB(np, nc_dien, 0);   /* mask all dma interrupts */
 325        INW(np, nc_sist);       /* another one, just to be sure :) */
 326        /*
 327         * The C1010-33 core does not report GEN in SIST,
 328         * if this interrupt is masked in SIEN.
 329         * I don't know yet if the C1010-66 behaves the same way.
 330         */
 331        if (np->features & FE_C10) {
 332                OUTW(np, nc_sien, GEN);
 333                OUTB(np, nc_istat1, SIRQD);
 334        }
 335        OUTB(np, nc_scntl3, 4);    /* set pre-scaler to divide by 3 */
 336        OUTB(np, nc_stime1, 0);    /* disable general purpose timer */
 337        OUTB(np, nc_stime1, gen);  /* set to nominal delay of 1<<gen * 125us */
 338        while (!(INW(np, nc_sist) & GEN) && ms++ < 100000)
 339                udelay(1000/4);    /* count in 1/4 of ms */
 340        OUTB(np, nc_stime1, 0);    /* disable general purpose timer */
 341        /*
 342         * Undo C1010-33 specific settings.
 343         */
 344        if (np->features & FE_C10) {
 345                OUTW(np, nc_sien, 0);
 346                OUTB(np, nc_istat1, 0);
 347        }
 348        /*
 349         * set prescaler to divide by whatever 0 means
 350         * 0 ought to choose divide by 2, but appears
 351         * to set divide by 3.5 mode in my 53c810 ...
 352         */
 353        OUTB(np, nc_scntl3, 0);
 354
 355        /*
 356         * adjust for prescaler, and convert into KHz 
 357         */
 358        f = ms ? ((1 << gen) * (4340*4)) / ms : 0;
 359
 360        /*
 361         * The C1010-33 result is biased by a factor 
 362         * of 2/3 compared to earlier chips.
 363         */
 364        if (np->features & FE_C10)
 365                f = (f * 2) / 3;
 366
 367        if (sym_verbose >= 2)
 368                printf ("%s: Delay (GEN=%d): %u msec, %u KHz\n",
 369                        sym_name(np), gen, ms/4, f);
 370
 371        return f;
 372}
 373
 374static unsigned sym_getfreq (struct sym_hcb *np)
 375{
 376        u_int f1, f2;
 377        int gen = 8;
 378
 379        getfreq (np, gen);      /* throw away first result */
 380        f1 = getfreq (np, gen);
 381        f2 = getfreq (np, gen);
 382        if (f1 > f2) f1 = f2;           /* trust lower result   */
 383        return f1;
 384}
 385
 386/*
 387 *  Get/probe chip SCSI clock frequency
 388 */
 389static void sym_getclock (struct sym_hcb *np, int mult)
 390{
 391        unsigned char scntl3 = np->sv_scntl3;
 392        unsigned char stest1 = np->sv_stest1;
 393        unsigned f1;
 394
 395        np->multiplier = 1;
 396        f1 = 40000;
 397        /*
 398         *  True with 875/895/896/895A with clock multiplier selected
 399         */
 400        if (mult > 1 && (stest1 & (DBLEN+DBLSEL)) == DBLEN+DBLSEL) {
 401                if (sym_verbose >= 2)
 402                        printf ("%s: clock multiplier found\n", sym_name(np));
 403                np->multiplier = mult;
 404        }
 405
 406        /*
 407         *  If multiplier not found or scntl3 not 7,5,3,
 408         *  reset chip and get frequency from general purpose timer.
 409         *  Otherwise trust scntl3 BIOS setting.
 410         */
 411        if (np->multiplier != mult || (scntl3 & 7) < 3 || !(scntl3 & 1)) {
 412                OUTB(np, nc_stest1, 0);         /* make sure doubler is OFF */
 413                f1 = sym_getfreq (np);
 414
 415                if (sym_verbose)
 416                        printf ("%s: chip clock is %uKHz\n", sym_name(np), f1);
 417
 418                if      (f1 <   45000)          f1 =  40000;
 419                else if (f1 <   55000)          f1 =  50000;
 420                else                            f1 =  80000;
 421
 422                if (f1 < 80000 && mult > 1) {
 423                        if (sym_verbose >= 2)
 424                                printf ("%s: clock multiplier assumed\n",
 425                                        sym_name(np));
 426                        np->multiplier  = mult;
 427                }
 428        } else {
 429                if      ((scntl3 & 7) == 3)     f1 =  40000;
 430                else if ((scntl3 & 7) == 5)     f1 =  80000;
 431                else                            f1 = 160000;
 432
 433                f1 /= np->multiplier;
 434        }
 435
 436        /*
 437         *  Compute controller synchronous parameters.
 438         */
 439        f1              *= np->multiplier;
 440        np->clock_khz   = f1;
 441}
 442
 443/*
 444 *  Get/probe PCI clock frequency
 445 */
 446static int sym_getpciclock (struct sym_hcb *np)
 447{
 448        int f = 0;
 449
 450        /*
 451         *  For now, we only need to know about the actual 
 452         *  PCI BUS clock frequency for C1010-66 chips.
 453         */
 454#if 1
 455        if (np->features & FE_66MHZ) {
 456#else
 457        if (1) {
 458#endif
 459                OUTB(np, nc_stest1, SCLK); /* Use the PCI clock as SCSI clock */
 460                f = sym_getfreq(np);
 461                OUTB(np, nc_stest1, 0);
 462        }
 463        np->pciclk_khz = f;
 464
 465        return f;
 466}
 467
 468/*
 469 *  SYMBIOS chip clock divisor table.
 470 *
 471 *  Divisors are multiplied by 10,000,000 in order to make 
 472 *  calculations more simple.
 473 */
 474#define _5M 5000000
 475static const u32 div_10M[] = {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M};
 476
 477/*
 478 *  Get clock factor and sync divisor for a given 
 479 *  synchronous factor period.
 480 */
 481static int 
 482sym_getsync(struct sym_hcb *np, u_char dt, u_char sfac, u_char *divp, u_char *fakp)
 483{
 484        u32     clk = np->clock_khz;    /* SCSI clock frequency in kHz  */
 485        int     div = np->clock_divn;   /* Number of divisors supported */
 486        u32     fak;                    /* Sync factor in sxfer         */
 487        u32     per;                    /* Period in tenths of ns       */
 488        u32     kpc;                    /* (per * clk)                  */
 489        int     ret;
 490
 491        /*
 492         *  Compute the synchronous period in tenths of nano-seconds
 493         */
 494        if (dt && sfac <= 9)    per = 125;
 495        else if (sfac <= 10)    per = 250;
 496        else if (sfac == 11)    per = 303;
 497        else if (sfac == 12)    per = 500;
 498        else                    per = 40 * sfac;
 499        ret = per;
 500
 501        kpc = per * clk;
 502        if (dt)
 503                kpc <<= 1;
 504
 505        /*
 506         *  For earliest C10 revision 0, we cannot use extra 
 507         *  clocks for the setting of the SCSI clocking.
 508         *  Note that this limits the lowest sync data transfer 
 509         *  to 5 Mega-transfers per second and may result in
 510         *  using higher clock divisors.
 511         */
 512#if 1
 513        if ((np->features & (FE_C10|FE_U3EN)) == FE_C10) {
 514                /*
 515                 *  Look for the lowest clock divisor that allows an 
 516                 *  output speed not faster than the period.
 517                 */
 518                while (div > 0) {
 519                        --div;
 520                        if (kpc > (div_10M[div] << 2)) {
 521                                ++div;
 522                                break;
 523                        }
 524                }
 525                fak = 0;                        /* No extra clocks */
 526                if (div == np->clock_divn) {    /* Are we too fast ? */
 527                        ret = -1;
 528                }
 529                *divp = div;
 530                *fakp = fak;
 531                return ret;
 532        }
 533#endif
 534
 535        /*
 536         *  Look for the greatest clock divisor that allows an 
 537         *  input speed faster than the period.
 538         */
 539        while (div-- > 0)
 540                if (kpc >= (div_10M[div] << 2)) break;
 541
 542        /*
 543         *  Calculate the lowest clock factor that allows an output 
 544         *  speed not faster than the period, and the max output speed.
 545         *  If fak >= 1 we will set both XCLKH_ST and XCLKH_DT.
 546         *  If fak >= 2 we will also set XCLKS_ST and XCLKS_DT.
 547         */
 548        if (dt) {
 549                fak = (kpc - 1) / (div_10M[div] << 1) + 1 - 2;
 550                /* ret = ((2+fak)*div_10M[div])/np->clock_khz; */
 551        } else {
 552                fak = (kpc - 1) / div_10M[div] + 1 - 4;
 553                /* ret = ((4+fak)*div_10M[div])/np->clock_khz; */
 554        }
 555
 556        /*
 557         *  Check against our hardware limits, or bugs :).
 558         */
 559        if (fak > 2) {
 560                fak = 2;
 561                ret = -1;
 562        }
 563
 564        /*
 565         *  Compute and return sync parameters.
 566         */
 567        *divp = div;
 568        *fakp = fak;
 569
 570        return ret;
 571}
 572
 573/*
 574 *  SYMBIOS chips allow burst lengths of 2, 4, 8, 16, 32, 64,
 575 *  128 transfers. All chips support at least 16 transfers 
 576 *  bursts. The 825A, 875 and 895 chips support bursts of up 
 577 *  to 128 transfers and the 895A and 896 support bursts of up
 578 *  to 64 transfers. All other chips support up to 16 
 579 *  transfers bursts.
 580 *
 581 *  For PCI 32 bit data transfers each transfer is a DWORD.
 582 *  It is a QUADWORD (8 bytes) for PCI 64 bit data transfers.
 583 *
 584 *  We use log base 2 (burst length) as internal code, with 
 585 *  value 0 meaning "burst disabled".
 586 */
 587
 588/*
 589 *  Burst length from burst code.
 590 */
 591#define burst_length(bc) (!(bc))? 0 : 1 << (bc)
 592
 593/*
 594 *  Burst code from io register bits.
 595 */
 596#define burst_code(dmode, ctest4, ctest5) \
 597        (ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1
 598
 599/*
 600 *  Set initial io register bits from burst code.
 601 */
 602static inline void sym_init_burst(struct sym_hcb *np, u_char bc)
 603{
 604        np->rv_ctest4   &= ~0x80;
 605        np->rv_dmode    &= ~(0x3 << 6);
 606        np->rv_ctest5   &= ~0x4;
 607
 608        if (!bc) {
 609                np->rv_ctest4   |= 0x80;
 610        }
 611        else {
 612                --bc;
 613                np->rv_dmode    |= ((bc & 0x3) << 6);
 614                np->rv_ctest5   |= (bc & 0x4);
 615        }
 616}
 617
 618/*
 619 *  Save initial settings of some IO registers.
 620 *  Assumed to have been set by BIOS.
 621 *  We cannot reset the chip prior to reading the 
 622 *  IO registers, since informations will be lost.
 623 *  Since the SCRIPTS processor may be running, this 
 624 *  is not safe on paper, but it seems to work quite 
 625 *  well. :)
 626 */
 627static void sym_save_initial_setting (struct sym_hcb *np)
 628{
 629        np->sv_scntl0   = INB(np, nc_scntl0) & 0x0a;
 630        np->sv_scntl3   = INB(np, nc_scntl3) & 0x07;
 631        np->sv_dmode    = INB(np, nc_dmode)  & 0xce;
 632        np->sv_dcntl    = INB(np, nc_dcntl)  & 0xa8;
 633        np->sv_ctest3   = INB(np, nc_ctest3) & 0x01;
 634        np->sv_ctest4   = INB(np, nc_ctest4) & 0x80;
 635        np->sv_gpcntl   = INB(np, nc_gpcntl);
 636        np->sv_stest1   = INB(np, nc_stest1);
 637        np->sv_stest2   = INB(np, nc_stest2) & 0x20;
 638        np->sv_stest4   = INB(np, nc_stest4);
 639        if (np->features & FE_C10) {    /* Always large DMA fifo + ultra3 */
 640                np->sv_scntl4   = INB(np, nc_scntl4);
 641                np->sv_ctest5   = INB(np, nc_ctest5) & 0x04;
 642        }
 643        else
 644                np->sv_ctest5   = INB(np, nc_ctest5) & 0x24;
 645}
 646
 647/*
 648 *  Set SCSI BUS mode.
 649 *  - LVD capable chips (895/895A/896/1010) report the current BUS mode
 650 *    through the STEST4 IO register.
 651 *  - For previous generation chips (825/825A/875), the user has to tell us
 652 *    how to check against HVD, since a 100% safe algorithm is not possible.
 653 */
 654static void sym_set_bus_mode(struct sym_hcb *np, struct sym_nvram *nvram)
 655{
 656        if (np->scsi_mode)
 657                return;
 658
 659        np->scsi_mode = SMODE_SE;
 660        if (np->features & (FE_ULTRA2|FE_ULTRA3))
 661                np->scsi_mode = (np->sv_stest4 & SMODE);
 662        else if (np->features & FE_DIFF) {
 663                if (SYM_SETUP_SCSI_DIFF == 1) {
 664                        if (np->sv_scntl3) {
 665                                if (np->sv_stest2 & 0x20)
 666                                        np->scsi_mode = SMODE_HVD;
 667                        } else if (nvram->type == SYM_SYMBIOS_NVRAM) {
 668                                if (!(INB(np, nc_gpreg) & 0x08))
 669                                        np->scsi_mode = SMODE_HVD;
 670                        }
 671                } else if (SYM_SETUP_SCSI_DIFF == 2)
 672                        np->scsi_mode = SMODE_HVD;
 673        }
 674        if (np->scsi_mode == SMODE_HVD)
 675                np->rv_stest2 |= 0x20;
 676}
 677
 678/*
 679 *  Prepare io register values used by sym_start_up() 
 680 *  according to selected and supported features.
 681 */
 682static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram)
 683{
 684        struct sym_data *sym_data = shost_priv(shost);
 685        struct pci_dev *pdev = sym_data->pdev;
 686        u_char  burst_max;
 687        u32     period;
 688        int i;
 689
 690        np->maxwide = (np->features & FE_WIDE) ? 1 : 0;
 691
 692        /*
 693         *  Guess the frequency of the chip's clock.
 694         */
 695        if      (np->features & (FE_ULTRA3 | FE_ULTRA2))
 696                np->clock_khz = 160000;
 697        else if (np->features & FE_ULTRA)
 698                np->clock_khz = 80000;
 699        else
 700                np->clock_khz = 40000;
 701
 702        /*
 703         *  Get the clock multiplier factor.
 704         */
 705        if      (np->features & FE_QUAD)
 706                np->multiplier  = 4;
 707        else if (np->features & FE_DBLR)
 708                np->multiplier  = 2;
 709        else
 710                np->multiplier  = 1;
 711
 712        /*
 713         *  Measure SCSI clock frequency for chips 
 714         *  it may vary from assumed one.
 715         */
 716        if (np->features & FE_VARCLK)
 717                sym_getclock(np, np->multiplier);
 718
 719        /*
 720         * Divisor to be used for async (timer pre-scaler).
 721         */
 722        i = np->clock_divn - 1;
 723        while (--i >= 0) {
 724                if (10ul * SYM_CONF_MIN_ASYNC * np->clock_khz > div_10M[i]) {
 725                        ++i;
 726                        break;
 727                }
 728        }
 729        np->rv_scntl3 = i+1;
 730
 731        /*
 732         * The C1010 uses hardwired divisors for async.
 733         * So, we just throw away, the async. divisor.:-)
 734         */
 735        if (np->features & FE_C10)
 736                np->rv_scntl3 = 0;
 737
 738        /*
 739         * Minimum synchronous period factor supported by the chip.
 740         * Btw, 'period' is in tenths of nanoseconds.
 741         */
 742        period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz;
 743
 744        if      (period <= 250)         np->minsync = 10;
 745        else if (period <= 303)         np->minsync = 11;
 746        else if (period <= 500)         np->minsync = 12;
 747        else                            np->minsync = (period + 40 - 1) / 40;
 748
 749        /*
 750         * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2).
 751         */
 752        if      (np->minsync < 25 &&
 753                 !(np->features & (FE_ULTRA|FE_ULTRA2|FE_ULTRA3)))
 754                np->minsync = 25;
 755        else if (np->minsync < 12 &&
 756                 !(np->features & (FE_ULTRA2|FE_ULTRA3)))
 757                np->minsync = 12;
 758
 759        /*
 760         * Maximum synchronous period factor supported by the chip.
 761         */
 762        period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz);
 763        np->maxsync = period > 2540 ? 254 : period / 10;
 764
 765        /*
 766         * If chip is a C1010, guess the sync limits in DT mode.
 767         */
 768        if ((np->features & (FE_C10|FE_ULTRA3)) == (FE_C10|FE_ULTRA3)) {
 769                if (np->clock_khz == 160000) {
 770                        np->minsync_dt = 9;
 771                        np->maxsync_dt = 50;
 772                        np->maxoffs_dt = nvram->type ? 62 : 31;
 773                }
 774        }
 775        
 776        /*
 777         *  64 bit addressing  (895A/896/1010) ?
 778         */
 779        if (np->features & FE_DAC) {
 780                if (!use_dac(np))
 781                        np->rv_ccntl1 |= (DDAC);
 782                else if (SYM_CONF_DMA_ADDRESSING_MODE == 1)
 783                        np->rv_ccntl1 |= (XTIMOD | EXTIBMV);
 784                else if (SYM_CONF_DMA_ADDRESSING_MODE == 2)
 785                        np->rv_ccntl1 |= (0 | EXTIBMV);
 786        }
 787
 788        /*
 789         *  Phase mismatch handled by SCRIPTS (895A/896/1010) ?
 790         */
 791        if (np->features & FE_NOPM)
 792                np->rv_ccntl0   |= (ENPMJ);
 793
 794        /*
 795         *  C1010-33 Errata: Part Number:609-039638 (rev. 1) is fixed.
 796         *  In dual channel mode, contention occurs if internal cycles
 797         *  are used. Disable internal cycles.
 798         */
 799        if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
 800            pdev->revision < 0x1)
 801                np->rv_ccntl0   |=  DILS;
 802
 803        /*
 804         *  Select burst length (dwords)
 805         */
 806        burst_max       = SYM_SETUP_BURST_ORDER;
 807        if (burst_max == 255)
 808                burst_max = burst_code(np->sv_dmode, np->sv_ctest4,
 809                                       np->sv_ctest5);
 810        if (burst_max > 7)
 811                burst_max = 7;
 812        if (burst_max > np->maxburst)
 813                burst_max = np->maxburst;
 814
 815        /*
 816         *  DEL 352 - 53C810 Rev x11 - Part Number 609-0392140 - ITEM 2.
 817         *  This chip and the 860 Rev 1 may wrongly use PCI cache line 
 818         *  based transactions on LOAD/STORE instructions. So we have 
 819         *  to prevent these chips from using such PCI transactions in 
 820         *  this driver. The generic ncr driver that does not use 
 821         *  LOAD/STORE instructions does not need this work-around.
 822         */
 823        if ((pdev->device == PCI_DEVICE_ID_NCR_53C810 &&
 824             pdev->revision >= 0x10 && pdev->revision <= 0x11) ||
 825            (pdev->device == PCI_DEVICE_ID_NCR_53C860 &&
 826             pdev->revision <= 0x1))
 827                np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP);
 828
 829        /*
 830         *  Select all supported special features.
 831         *  If we are using on-board RAM for scripts, prefetch (PFEN) 
 832         *  does not help, but burst op fetch (BOF) does.
 833         *  Disabling PFEN makes sure BOF will be used.
 834         */
 835        if (np->features & FE_ERL)
 836                np->rv_dmode    |= ERL;         /* Enable Read Line */
 837        if (np->features & FE_BOF)
 838                np->rv_dmode    |= BOF;         /* Burst Opcode Fetch */
 839        if (np->features & FE_ERMP)
 840                np->rv_dmode    |= ERMP;        /* Enable Read Multiple */
 841#if 1
 842        if ((np->features & FE_PFEN) && !np->ram_ba)
 843#else
 844        if (np->features & FE_PFEN)
 845#endif
 846                np->rv_dcntl    |= PFEN;        /* Prefetch Enable */
 847        if (np->features & FE_CLSE)
 848                np->rv_dcntl    |= CLSE;        /* Cache Line Size Enable */
 849        if (np->features & FE_WRIE)
 850                np->rv_ctest3   |= WRIE;        /* Write and Invalidate */
 851        if (np->features & FE_DFS)
 852                np->rv_ctest5   |= DFS;         /* Dma Fifo Size */
 853
 854        /*
 855         *  Select some other
 856         */
 857        np->rv_ctest4   |= MPEE; /* Master parity checking */
 858        np->rv_scntl0   |= 0x0a; /*  full arb., ena parity, par->ATN  */
 859
 860        /*
 861         *  Get parity checking, host ID and verbose mode from NVRAM
 862         */
 863        np->myaddr = 255;
 864        np->scsi_mode = 0;
 865        sym_nvram_setup_host(shost, np, nvram);
 866
 867        /*
 868         *  Get SCSI addr of host adapter (set by bios?).
 869         */
 870        if (np->myaddr == 255) {
 871                np->myaddr = INB(np, nc_scid) & 0x07;
 872                if (!np->myaddr)
 873                        np->myaddr = SYM_SETUP_HOST_ID;
 874        }
 875
 876        /*
 877         *  Prepare initial io register bits for burst length
 878         */
 879        sym_init_burst(np, burst_max);
 880
 881        sym_set_bus_mode(np, nvram);
 882
 883        /*
 884         *  Set LED support from SCRIPTS.
 885         *  Ignore this feature for boards known to use a 
 886         *  specific GPIO wiring and for the 895A, 896 
 887         *  and 1010 that drive the LED directly.
 888         */
 889        if ((SYM_SETUP_SCSI_LED || 
 890             (nvram->type == SYM_SYMBIOS_NVRAM ||
 891              (nvram->type == SYM_TEKRAM_NVRAM &&
 892               pdev->device == PCI_DEVICE_ID_NCR_53C895))) &&
 893            !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01))
 894                np->features |= FE_LED0;
 895
 896        /*
 897         *  Set irq mode.
 898         */
 899        switch(SYM_SETUP_IRQ_MODE & 3) {
 900        case 2:
 901                np->rv_dcntl    |= IRQM;
 902                break;
 903        case 1:
 904                np->rv_dcntl    |= (np->sv_dcntl & IRQM);
 905                break;
 906        default:
 907                break;
 908        }
 909
 910        /*
 911         *  Configure targets according to driver setup.
 912         *  If NVRAM present get targets setup from NVRAM.
 913         */
 914        for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
 915                struct sym_tcb *tp = &np->target[i];
 916
 917                tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
 918                tp->usrtags = SYM_SETUP_MAX_TAG;
 919                tp->usr_width = np->maxwide;
 920                tp->usr_period = 9;
 921
 922                sym_nvram_setup_target(tp, i, nvram);
 923
 924                if (!tp->usrtags)
 925                        tp->usrflags &= ~SYM_TAGS_ENABLED;
 926        }
 927
 928        /*
 929         *  Let user know about the settings.
 930         */
 931        printf("%s: %s, ID %d, Fast-%d, %s, %s\n", sym_name(np),
 932                sym_nvram_type(nvram), np->myaddr,
 933                (np->features & FE_ULTRA3) ? 80 : 
 934                (np->features & FE_ULTRA2) ? 40 : 
 935                (np->features & FE_ULTRA)  ? 20 : 10,
 936                sym_scsi_bus_mode(np->scsi_mode),
 937                (np->rv_scntl0 & 0xa)   ? "parity checking" : "NO parity");
 938        /*
 939         *  Tell him more on demand.
 940         */
 941        if (sym_verbose) {
 942                printf("%s: %s IRQ line driver%s\n",
 943                        sym_name(np),
 944                        np->rv_dcntl & IRQM ? "totem pole" : "open drain",
 945                        np->ram_ba ? ", using on-chip SRAM" : "");
 946                printf("%s: using %s firmware.\n", sym_name(np), np->fw_name);
 947                if (np->features & FE_NOPM)
 948                        printf("%s: handling phase mismatch from SCRIPTS.\n", 
 949                               sym_name(np));
 950        }
 951        /*
 952         *  And still more.
 953         */
 954        if (sym_verbose >= 2) {
 955                printf ("%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
 956                        "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
 957                        sym_name(np), np->sv_scntl3, np->sv_dmode, np->sv_dcntl,
 958                        np->sv_ctest3, np->sv_ctest4, np->sv_ctest5);
 959
 960                printf ("%s: final   SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
 961                        "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
 962                        sym_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl,
 963                        np->rv_ctest3, np->rv_ctest4, np->rv_ctest5);
 964        }
 965
 966        return 0;
 967}
 968
 969/*
 970 *  Test the pci bus snoop logic :-(
 971 *
 972 *  Has to be called with interrupts disabled.
 973 */
 974#ifdef CONFIG_SCSI_SYM53C8XX_MMIO
 975static int sym_regtest(struct sym_hcb *np)
 976{
 977        register volatile u32 data;
 978        /*
 979         *  chip registers may NOT be cached.
 980         *  write 0xffffffff to a read only register area,
 981         *  and try to read it back.
 982         */
 983        data = 0xffffffff;
 984        OUTL(np, nc_dstat, data);
 985        data = INL(np, nc_dstat);
 986#if 1
 987        if (data == 0xffffffff) {
 988#else
 989        if ((data & 0xe2f0fffd) != 0x02000080) {
 990#endif
 991                printf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n",
 992                        (unsigned) data);
 993                return 0x10;
 994        }
 995        return 0;
 996}
 997#else
 998static inline int sym_regtest(struct sym_hcb *np)
 999{
1000        return 0;
1001}
1002#endif
1003
1004static int sym_snooptest(struct sym_hcb *np)
1005{
1006        u32 sym_rd, sym_wr, sym_bk, host_rd, host_wr, pc, dstat;
1007        int i, err;
1008
1009        err = sym_regtest(np);
1010        if (err)
1011                return err;
1012restart_test:
1013        /*
1014         *  Enable Master Parity Checking as we intend 
1015         *  to enable it for normal operations.
1016         */
1017        OUTB(np, nc_ctest4, (np->rv_ctest4 & MPEE));
1018        /*
1019         *  init
1020         */
1021        pc  = SCRIPTZ_BA(np, snooptest);
1022        host_wr = 1;
1023        sym_wr  = 2;
1024        /*
1025         *  Set memory and register.
1026         */
1027        np->scratch = cpu_to_scr(host_wr);
1028        OUTL(np, nc_temp, sym_wr);
1029        /*
1030         *  Start script (exchange values)
1031         */
1032        OUTL(np, nc_dsa, np->hcb_ba);
1033        OUTL_DSP(np, pc);
1034        /*
1035         *  Wait 'til done (with timeout)
1036         */
1037        for (i=0; i<SYM_SNOOP_TIMEOUT; i++)
1038                if (INB(np, nc_istat) & (INTF|SIP|DIP))
1039                        break;
1040        if (i>=SYM_SNOOP_TIMEOUT) {
1041                printf ("CACHE TEST FAILED: timeout.\n");
1042                return (0x20);
1043        }
1044        /*
1045         *  Check for fatal DMA errors.
1046         */
1047        dstat = INB(np, nc_dstat);
1048#if 1   /* Band aiding for broken hardwares that fail PCI parity */
1049        if ((dstat & MDPE) && (np->rv_ctest4 & MPEE)) {
1050                printf ("%s: PCI DATA PARITY ERROR DETECTED - "
1051                        "DISABLING MASTER DATA PARITY CHECKING.\n",
1052                        sym_name(np));
1053                np->rv_ctest4 &= ~MPEE;
1054                goto restart_test;
1055        }
1056#endif
1057        if (dstat & (MDPE|BF|IID)) {
1058                printf ("CACHE TEST FAILED: DMA error (dstat=0x%02x).", dstat);
1059                return (0x80);
1060        }
1061        /*
1062         *  Save termination position.
1063         */
1064        pc = INL(np, nc_dsp);
1065        /*
1066         *  Read memory and register.
1067         */
1068        host_rd = scr_to_cpu(np->scratch);
1069        sym_rd  = INL(np, nc_scratcha);
1070        sym_bk  = INL(np, nc_temp);
1071        /*
1072         *  Check termination position.
1073         */
1074        if (pc != SCRIPTZ_BA(np, snoopend)+8) {
1075                printf ("CACHE TEST FAILED: script execution failed.\n");
1076                printf ("start=%08lx, pc=%08lx, end=%08lx\n", 
1077                        (u_long) SCRIPTZ_BA(np, snooptest), (u_long) pc,
1078                        (u_long) SCRIPTZ_BA(np, snoopend) +8);
1079                return (0x40);
1080        }
1081        /*
1082         *  Show results.
1083         */
1084        if (host_wr != sym_rd) {
1085                printf ("CACHE TEST FAILED: host wrote %d, chip read %d.\n",
1086                        (int) host_wr, (int) sym_rd);
1087                err |= 1;
1088        }
1089        if (host_rd != sym_wr) {
1090                printf ("CACHE TEST FAILED: chip wrote %d, host read %d.\n",
1091                        (int) sym_wr, (int) host_rd);
1092                err |= 2;
1093        }
1094        if (sym_bk != sym_wr) {
1095                printf ("CACHE TEST FAILED: chip wrote %d, read back %d.\n",
1096                        (int) sym_wr, (int) sym_bk);
1097                err |= 4;
1098        }
1099
1100        return err;
1101}
1102
1103/*
1104 *  log message for real hard errors
1105 *
1106 *  sym0 targ 0?: ERROR (ds:si) (so-si-sd) (sx/s3/s4) @ name (dsp:dbc).
1107 *            reg: r0 r1 r2 r3 r4 r5 r6 ..... rf.
1108 *
1109 *  exception register:
1110 *      ds:     dstat
1111 *      si:     sist
1112 *
1113 *  SCSI bus lines:
1114 *      so:     control lines as driven by chip.
1115 *      si:     control lines as seen by chip.
1116 *      sd:     scsi data lines as seen by chip.
1117 *
1118 *  wide/fastmode:
1119 *      sx:     sxfer  (see the manual)
1120 *      s3:     scntl3 (see the manual)
1121 *      s4:     scntl4 (see the manual)
1122 *
1123 *  current script command:
1124 *      dsp:    script address (relative to start of script).
1125 *      dbc:    first word of script command.
1126 *
1127 *  First 24 register of the chip:
1128 *      r0..rf
1129 */
1130static void sym_log_hard_error(struct Scsi_Host *shost, u_short sist, u_char dstat)
1131{
1132        struct sym_hcb *np = sym_get_hcb(shost);
1133        u32     dsp;
1134        int     script_ofs;
1135        int     script_size;
1136        char    *script_name;
1137        u_char  *script_base;
1138        int     i;
1139
1140        dsp     = INL(np, nc_dsp);
1141
1142        if      (dsp > np->scripta_ba &&
1143                 dsp <= np->scripta_ba + np->scripta_sz) {
1144                script_ofs      = dsp - np->scripta_ba;
1145                script_size     = np->scripta_sz;
1146                script_base     = (u_char *) np->scripta0;
1147                script_name     = "scripta";
1148        }
1149        else if (np->scriptb_ba < dsp && 
1150                 dsp <= np->scriptb_ba + np->scriptb_sz) {
1151                script_ofs      = dsp - np->scriptb_ba;
1152                script_size     = np->scriptb_sz;
1153                script_base     = (u_char *) np->scriptb0;
1154                script_name     = "scriptb";
1155        } else {
1156                script_ofs      = dsp;
1157                script_size     = 0;
1158                script_base     = NULL;
1159                script_name     = "mem";
1160        }
1161
1162        printf ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x/%x) @ (%s %x:%08x).\n",
1163                sym_name(np), (unsigned)INB(np, nc_sdid)&0x0f, dstat, sist,
1164                (unsigned)INB(np, nc_socl), (unsigned)INB(np, nc_sbcl),
1165                (unsigned)INB(np, nc_sbdl), (unsigned)INB(np, nc_sxfer),
1166                (unsigned)INB(np, nc_scntl3),
1167                (np->features & FE_C10) ?  (unsigned)INB(np, nc_scntl4) : 0,
1168                script_name, script_ofs,   (unsigned)INL(np, nc_dbc));
1169
1170        if (((script_ofs & 3) == 0) &&
1171            (unsigned)script_ofs < script_size) {
1172                printf ("%s: script cmd = %08x\n", sym_name(np),
1173                        scr_to_cpu((int) *(u32 *)(script_base + script_ofs)));
1174        }
1175
1176        printf("%s: regdump:", sym_name(np));
1177        for (i = 0; i < 24; i++)
1178                printf(" %02x", (unsigned)INB_OFF(np, i));
1179        printf(".\n");
1180
1181        /*
1182         *  PCI BUS error.
1183         */
1184        if (dstat & (MDPE|BF))
1185                sym_log_bus_error(shost);
1186}
1187
1188void sym_dump_registers(struct Scsi_Host *shost)
1189{
1190        struct sym_hcb *np = sym_get_hcb(shost);
1191        u_short sist;
1192        u_char dstat;
1193
1194        sist = INW(np, nc_sist);
1195        dstat = INB(np, nc_dstat);
1196        sym_log_hard_error(shost, sist, dstat);
1197}
1198
1199static struct sym_chip sym_dev_table[] = {
1200 {PCI_DEVICE_ID_NCR_53C810, 0x0f, "810", 4, 8, 4, 64,
1201 FE_ERL}
1202 ,
1203#ifdef SYM_DEBUG_GENERIC_SUPPORT
1204 {PCI_DEVICE_ID_NCR_53C810, 0xff, "810a", 4,  8, 4, 1,
1205 FE_BOF}
1206 ,
1207#else
1208 {PCI_DEVICE_ID_NCR_53C810, 0xff, "810a", 4,  8, 4, 1,
1209 FE_CACHE_SET|FE_LDSTR|FE_PFEN|FE_BOF}
1210 ,
1211#endif
1212 {PCI_DEVICE_ID_NCR_53C815, 0xff, "815", 4,  8, 4, 64,
1213 FE_BOF|FE_ERL}
1214 ,
1215 {PCI_DEVICE_ID_NCR_53C825, 0x0f, "825", 6,  8, 4, 64,
1216 FE_WIDE|FE_BOF|FE_ERL|FE_DIFF}
1217 ,
1218 {PCI_DEVICE_ID_NCR_53C825, 0xff, "825a", 6,  8, 4, 2,
1219 FE_WIDE|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM|FE_DIFF}
1220 ,
1221 {PCI_DEVICE_ID_NCR_53C860, 0xff, "860", 4,  8, 5, 1,
1222 FE_ULTRA|FE_CACHE_SET|FE_BOF|FE_LDSTR|FE_PFEN}
1223 ,
1224 {PCI_DEVICE_ID_NCR_53C875, 0x01, "875", 6, 16, 5, 2,
1225 FE_WIDE|FE_ULTRA|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1226 FE_RAM|FE_DIFF|FE_VARCLK}
1227 ,
1228 {PCI_DEVICE_ID_NCR_53C875, 0xff, "875", 6, 16, 5, 2,
1229 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1230 FE_RAM|FE_DIFF|FE_VARCLK}
1231 ,
1232 {PCI_DEVICE_ID_NCR_53C875J, 0xff, "875J", 6, 16, 5, 2,
1233 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1234 FE_RAM|FE_DIFF|FE_VARCLK}
1235 ,
1236 {PCI_DEVICE_ID_NCR_53C885, 0xff, "885", 6, 16, 5, 2,
1237 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1238 FE_RAM|FE_DIFF|FE_VARCLK}
1239 ,
1240#ifdef SYM_DEBUG_GENERIC_SUPPORT
1241 {PCI_DEVICE_ID_NCR_53C895, 0xff, "895", 6, 31, 7, 2,
1242 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|
1243 FE_RAM|FE_LCKFRQ}
1244 ,
1245#else
1246 {PCI_DEVICE_ID_NCR_53C895, 0xff, "895", 6, 31, 7, 2,
1247 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1248 FE_RAM|FE_LCKFRQ}
1249 ,
1250#endif
1251 {PCI_DEVICE_ID_NCR_53C896, 0xff, "896", 6, 31, 7, 4,
1252 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1253 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ}
1254 ,
1255 {PCI_DEVICE_ID_LSI_53C895A, 0xff, "895a", 6, 31, 7, 4,
1256 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1257 FE_RAM|FE_RAM8K|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ}
1258 ,
1259 {PCI_DEVICE_ID_LSI_53C875A, 0xff, "875a", 6, 31, 7, 4,
1260 FE_WIDE|FE_ULTRA|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1261 FE_RAM|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ}
1262 ,
1263 {PCI_DEVICE_ID_LSI_53C1010_33, 0x00, "1010-33", 6, 31, 7, 8,
1264 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN|
1265 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC|
1266 FE_C10}
1267 ,
1268 {PCI_DEVICE_ID_LSI_53C1010_33, 0xff, "1010-33", 6, 31, 7, 8,
1269 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN|
1270 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC|
1271 FE_C10|FE_U3EN}
1272 ,
1273 {PCI_DEVICE_ID_LSI_53C1010_66, 0xff, "1010-66", 6, 31, 7, 8,
1274 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN|
1275 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_66MHZ|FE_CRC|
1276 FE_C10|FE_U3EN}
1277 ,
1278 {PCI_DEVICE_ID_LSI_53C1510, 0xff, "1510d", 6, 31, 7, 4,
1279 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1280 FE_RAM|FE_IO256|FE_LEDC}
1281};
1282
1283#define sym_num_devs (ARRAY_SIZE(sym_dev_table))
1284
1285/*
1286 *  Look up the chip table.
1287 *
1288 *  Return a pointer to the chip entry if found, 
1289 *  zero otherwise.
1290 */
1291struct sym_chip *
1292sym_lookup_chip_table (u_short device_id, u_char revision)
1293{
1294        struct  sym_chip *chip;
1295        int     i;
1296
1297        for (i = 0; i < sym_num_devs; i++) {
1298                chip = &sym_dev_table[i];
1299                if (device_id != chip->device_id)
1300                        continue;
1301                if (revision > chip->revision_id)
1302                        continue;
1303                return chip;
1304        }
1305
1306        return NULL;
1307}
1308
1309#if SYM_CONF_DMA_ADDRESSING_MODE == 2
1310/*
1311 *  Lookup the 64 bit DMA segments map.
1312 *  This is only used if the direct mapping 
1313 *  has been unsuccessful.
1314 */
1315int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s)
1316{
1317        int i;
1318
1319        if (!use_dac(np))
1320                goto weird;
1321
1322        /* Look up existing mappings */
1323        for (i = SYM_DMAP_SIZE-1; i > 0; i--) {
1324                if (h == np->dmap_bah[i])
1325                        return i;
1326        }
1327        /* If direct mapping is free, get it */
1328        if (!np->dmap_bah[s])
1329                goto new;
1330        /* Collision -> lookup free mappings */
1331        for (s = SYM_DMAP_SIZE-1; s > 0; s--) {
1332                if (!np->dmap_bah[s])
1333                        goto new;
1334        }
1335weird:
1336        panic("sym: ran out of 64 bit DMA segment registers");
1337        return -1;
1338new:
1339        np->dmap_bah[s] = h;
1340        np->dmap_dirty = 1;
1341        return s;
1342}
1343
1344/*
1345 *  Update IO registers scratch C..R so they will be 
1346 *  in sync. with queued CCB expectations.
1347 */
1348static void sym_update_dmap_regs(struct sym_hcb *np)
1349{
1350        int o, i;
1351
1352        if (!np->dmap_dirty)
1353                return;
1354        o = offsetof(struct sym_reg, nc_scrx[0]);
1355        for (i = 0; i < SYM_DMAP_SIZE; i++) {
1356                OUTL_OFF(np, o, np->dmap_bah[i]);
1357                o += 4;
1358        }
1359        np->dmap_dirty = 0;
1360}
1361#endif
1362
1363/* Enforce all the fiddly SPI rules and the chip limitations */
1364static void sym_check_goals(struct sym_hcb *np, struct scsi_target *starget,
1365                struct sym_trans *goal)
1366{
1367        if (!spi_support_wide(starget))
1368                goal->width = 0;
1369
1370        if (!spi_support_sync(starget)) {
1371                goal->iu = 0;
1372                goal->dt = 0;
1373                goal->qas = 0;
1374                goal->offset = 0;
1375                return;
1376        }
1377
1378        if (spi_support_dt(starget)) {
1379                if (spi_support_dt_only(starget))
1380                        goal->dt = 1;
1381
1382                if (goal->offset == 0)
1383                        goal->dt = 0;
1384        } else {
1385                goal->dt = 0;
1386        }
1387
1388        /* Some targets fail to properly negotiate DT in SE mode */
1389        if ((np->scsi_mode != SMODE_LVD) || !(np->features & FE_U3EN))
1390                goal->dt = 0;
1391
1392        if (goal->dt) {
1393                /* all DT transfers must be wide */
1394                goal->width = 1;
1395                if (goal->offset > np->maxoffs_dt)
1396                        goal->offset = np->maxoffs_dt;
1397                if (goal->period < np->minsync_dt)
1398                        goal->period = np->minsync_dt;
1399                if (goal->period > np->maxsync_dt)
1400                        goal->period = np->maxsync_dt;
1401        } else {
1402                goal->iu = goal->qas = 0;
1403                if (goal->offset > np->maxoffs)
1404                        goal->offset = np->maxoffs;
1405                if (goal->period < np->minsync)
1406                        goal->period = np->minsync;
1407                if (goal->period > np->maxsync)
1408                        goal->period = np->maxsync;
1409        }
1410}
1411
1412/*
1413 *  Prepare the next negotiation message if needed.
1414 *
1415 *  Fill in the part of message buffer that contains the 
1416 *  negotiation and the nego_status field of the CCB.
1417 *  Returns the size of the message in bytes.
1418 */
1419static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgptr)
1420{
1421        struct sym_tcb *tp = &np->target[cp->target];
1422        struct scsi_target *starget = tp->starget;
1423        struct sym_trans *goal = &tp->tgoal;
1424        int msglen = 0;
1425        int nego;
1426
1427        sym_check_goals(np, starget, goal);
1428
1429        /*
1430         * Many devices implement PPR in a buggy way, so only use it if we
1431         * really want to.
1432         */
1433        if (goal->renego == NS_PPR || (goal->offset &&
1434            (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)))) {
1435                nego = NS_PPR;
1436        } else if (goal->renego == NS_WIDE || goal->width) {
1437                nego = NS_WIDE;
1438        } else if (goal->renego == NS_SYNC || goal->offset) {
1439                nego = NS_SYNC;
1440        } else {
1441                goal->check_nego = 0;
1442                nego = 0;
1443        }
1444
1445        switch (nego) {
1446        case NS_SYNC:
1447                msglen += spi_populate_sync_msg(msgptr + msglen, goal->period,
1448                                goal->offset);
1449                break;
1450        case NS_WIDE:
1451                msglen += spi_populate_width_msg(msgptr + msglen, goal->width);
1452                break;
1453        case NS_PPR:
1454                msglen += spi_populate_ppr_msg(msgptr + msglen, goal->period,
1455                                goal->offset, goal->width,
1456                                (goal->iu ? PPR_OPT_IU : 0) |
1457                                        (goal->dt ? PPR_OPT_DT : 0) |
1458                                        (goal->qas ? PPR_OPT_QAS : 0));
1459                break;
1460        }
1461
1462        cp->nego_status = nego;
1463
1464        if (nego) {
1465                tp->nego_cp = cp; /* Keep track a nego will be performed */
1466                if (DEBUG_FLAGS & DEBUG_NEGO) {
1467                        sym_print_nego_msg(np, cp->target, 
1468                                          nego == NS_SYNC ? "sync msgout" :
1469                                          nego == NS_WIDE ? "wide msgout" :
1470                                          "ppr msgout", msgptr);
1471                }
1472        }
1473
1474        return msglen;
1475}
1476
1477/*
1478 *  Insert a job into the start queue.
1479 */
1480void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp)
1481{
1482        u_short qidx;
1483
1484#ifdef SYM_CONF_IARB_SUPPORT
1485        /*
1486         *  If the previously queued CCB is not yet done, 
1487         *  set the IARB hint. The SCRIPTS will go with IARB 
1488         *  for this job when starting the previous one.
1489         *  We leave devices a chance to win arbitration by 
1490         *  not using more than 'iarb_max' consecutive 
1491         *  immediate arbitrations.
1492         */
1493        if (np->last_cp && np->iarb_count < np->iarb_max) {
1494                np->last_cp->host_flags |= HF_HINT_IARB;
1495                ++np->iarb_count;
1496        }
1497        else
1498                np->iarb_count = 0;
1499        np->last_cp = cp;
1500#endif
1501
1502#if   SYM_CONF_DMA_ADDRESSING_MODE == 2
1503        /*
1504         *  Make SCRIPTS aware of the 64 bit DMA 
1505         *  segment registers not being up-to-date.
1506         */
1507        if (np->dmap_dirty)
1508                cp->host_xflags |= HX_DMAP_DIRTY;
1509#endif
1510
1511        /*
1512         *  Insert first the idle task and then our job.
1513         *  The MBs should ensure proper ordering.
1514         */
1515        qidx = np->squeueput + 2;
1516        if (qidx >= MAX_QUEUE*2) qidx = 0;
1517
1518        np->squeue [qidx]          = cpu_to_scr(np->idletask_ba);
1519        MEMORY_WRITE_BARRIER();
1520        np->squeue [np->squeueput] = cpu_to_scr(cp->ccb_ba);
1521
1522        np->squeueput = qidx;
1523
1524        if (DEBUG_FLAGS & DEBUG_QUEUE)
1525                scmd_printk(KERN_DEBUG, cp->cmd, "queuepos=%d\n",
1526                                                        np->squeueput);
1527
1528        /*
1529         *  Script processor may be waiting for reselect.
1530         *  Wake it up.
1531         */
1532        MEMORY_WRITE_BARRIER();
1533        OUTB(np, nc_istat, SIGP|np->istat_sem);
1534}
1535
1536#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
1537/*
1538 *  Start next ready-to-start CCBs.
1539 */
1540void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn)
1541{
1542        SYM_QUEHEAD *qp;
1543        struct sym_ccb *cp;
1544
1545        /* 
1546         *  Paranoia, as usual. :-)
1547         */
1548        assert(!lp->started_tags || !lp->started_no_tag);
1549
1550        /*
1551         *  Try to start as many commands as asked by caller.
1552         *  Prevent from having both tagged and untagged 
1553         *  commands queued to the device at the same time.
1554         */
1555        while (maxn--) {
1556                qp = sym_remque_head(&lp->waiting_ccbq);
1557                if (!qp)
1558                        break;
1559                cp = sym_que_entry(qp, struct sym_ccb, link2_ccbq);
1560                if (cp->tag != NO_TAG) {
1561                        if (lp->started_no_tag ||
1562                            lp->started_tags >= lp->started_max) {
1563                                sym_insque_head(qp, &lp->waiting_ccbq);
1564                                break;
1565                        }
1566                        lp->itlq_tbl[cp->tag] = cpu_to_scr(cp->ccb_ba);
1567                        lp->head.resel_sa =
1568                                cpu_to_scr(SCRIPTA_BA(np, resel_tag));
1569                        ++lp->started_tags;
1570                } else {
1571                        if (lp->started_no_tag || lp->started_tags) {
1572                                sym_insque_head(qp, &lp->waiting_ccbq);
1573                                break;
1574                        }
1575                        lp->head.itl_task_sa = cpu_to_scr(cp->ccb_ba);
1576                        lp->head.resel_sa =
1577                              cpu_to_scr(SCRIPTA_BA(np, resel_no_tag));
1578                        ++lp->started_no_tag;
1579                }
1580                cp->started = 1;
1581                sym_insque_tail(qp, &lp->started_ccbq);
1582                sym_put_start_queue(np, cp);
1583        }
1584}
1585#endif /* SYM_OPT_HANDLE_DEVICE_QUEUEING */
1586
1587/*
1588 *  The chip may have completed jobs. Look at the DONE QUEUE.
1589 *
1590 *  On paper, memory read barriers may be needed here to 
1591 *  prevent out of order LOADs by the CPU from having 
1592 *  prefetched stale data prior to DMA having occurred.
1593 */
1594static int sym_wakeup_done (struct sym_hcb *np)
1595{
1596        struct sym_ccb *cp;
1597        int i, n;
1598        u32 dsa;
1599
1600        n = 0;
1601        i = np->dqueueget;
1602
1603        /* MEMORY_READ_BARRIER(); */
1604        while (1) {
1605                dsa = scr_to_cpu(np->dqueue[i]);
1606                if (!dsa)
1607                        break;
1608                np->dqueue[i] = 0;
1609                if ((i = i+2) >= MAX_QUEUE*2)
1610                        i = 0;
1611
1612                cp = sym_ccb_from_dsa(np, dsa);
1613                if (cp) {
1614                        MEMORY_READ_BARRIER();
1615                        sym_complete_ok (np, cp);
1616                        ++n;
1617                }
1618                else
1619                        printf ("%s: bad DSA (%x) in done queue.\n",
1620                                sym_name(np), (u_int) dsa);
1621        }
1622        np->dqueueget = i;
1623
1624        return n;
1625}
1626
1627/*
1628 *  Complete all CCBs queued to the COMP queue.
1629 *
1630 *  These CCBs are assumed:
1631 *  - Not to be referenced either by devices or 
1632 *    SCRIPTS-related queues and datas.
1633 *  - To have to be completed with an error condition 
1634 *    or requeued.
1635 *
1636 *  The device queue freeze count is incremented 
1637 *  for each CCB that does not prevent this.
1638 *  This function is called when all CCBs involved 
1639 *  in error handling/recovery have been reaped.
1640 */
1641static void sym_flush_comp_queue(struct sym_hcb *np, int cam_status)
1642{
1643        SYM_QUEHEAD *qp;
1644        struct sym_ccb *cp;
1645
1646        while ((qp = sym_remque_head(&np->comp_ccbq)) != NULL) {
1647                struct scsi_cmnd *cmd;
1648                cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
1649                sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
1650                /* Leave quiet CCBs waiting for resources */
1651                if (cp->host_status == HS_WAIT)
1652                        continue;
1653                cmd = cp->cmd;
1654                if (cam_status)
1655                        sym_set_cam_status(cmd, cam_status);
1656#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
1657                if (sym_get_cam_status(cmd) == DID_SOFT_ERROR) {
1658                        struct sym_tcb *tp = &np->target[cp->target];
1659                        struct sym_lcb *lp = sym_lp(tp, cp->lun);
1660                        if (lp) {
1661                                sym_remque(&cp->link2_ccbq);
1662                                sym_insque_tail(&cp->link2_ccbq,
1663                                                &lp->waiting_ccbq);
1664                                if (cp->started) {
1665                                        if (cp->tag != NO_TAG)
1666                                                --lp->started_tags;
1667                                        else
1668                                                --lp->started_no_tag;
1669                                }
1670                        }
1671                        cp->started = 0;
1672                        continue;
1673                }
1674#endif
1675                sym_free_ccb(np, cp);
1676                sym_xpt_done(np, cmd);
1677        }
1678}
1679
1680/*
1681 *  Complete all active CCBs with error.
1682 *  Used on CHIP/SCSI RESET.
1683 */
1684static void sym_flush_busy_queue (struct sym_hcb *np, int cam_status)
1685{
1686        /*
1687         *  Move all active CCBs to the COMP queue 
1688         *  and flush this queue.
1689         */
1690        sym_que_splice(&np->busy_ccbq, &np->comp_ccbq);
1691        sym_que_init(&np->busy_ccbq);
1692        sym_flush_comp_queue(np, cam_status);
1693}
1694
1695/*
1696 *  Start chip.
1697 *
1698 *  'reason' means:
1699 *     0: initialisation.
1700 *     1: SCSI BUS RESET delivered or received.
1701 *     2: SCSI BUS MODE changed.
1702 */
1703void sym_start_up(struct Scsi_Host *shost, int reason)
1704{
1705        struct sym_data *sym_data = shost_priv(shost);
1706        struct pci_dev *pdev = sym_data->pdev;
1707        struct sym_hcb *np = sym_data->ncb;
1708        int     i;
1709        u32     phys;
1710
1711        /*
1712         *  Reset chip if asked, otherwise just clear fifos.
1713         */
1714        if (reason == 1)
1715                sym_soft_reset(np);
1716        else {
1717                OUTB(np, nc_stest3, TE|CSF);
1718                OUTONB(np, nc_ctest3, CLF);
1719        }
1720 
1721        /*
1722         *  Clear Start Queue
1723         */
1724        phys = np->squeue_ba;
1725        for (i = 0; i < MAX_QUEUE*2; i += 2) {
1726                np->squeue[i]   = cpu_to_scr(np->idletask_ba);
1727                np->squeue[i+1] = cpu_to_scr(phys + (i+2)*4);
1728        }
1729        np->squeue[MAX_QUEUE*2-1] = cpu_to_scr(phys);
1730
1731        /*
1732         *  Start at first entry.
1733         */
1734        np->squeueput = 0;
1735
1736        /*
1737         *  Clear Done Queue
1738         */
1739        phys = np->dqueue_ba;
1740        for (i = 0; i < MAX_QUEUE*2; i += 2) {
1741                np->dqueue[i]   = 0;
1742                np->dqueue[i+1] = cpu_to_scr(phys + (i+2)*4);
1743        }
1744        np->dqueue[MAX_QUEUE*2-1] = cpu_to_scr(phys);
1745
1746        /*
1747         *  Start at first entry.
1748         */
1749        np->dqueueget = 0;
1750
1751        /*
1752         *  Install patches in scripts.
1753         *  This also let point to first position the start 
1754         *  and done queue pointers used from SCRIPTS.
1755         */
1756        np->fw_patch(shost);
1757
1758        /*
1759         *  Wakeup all pending jobs.
1760         */
1761        sym_flush_busy_queue(np, DID_RESET);
1762
1763        /*
1764         *  Init chip.
1765         */
1766        OUTB(np, nc_istat,  0x00);                      /*  Remove Reset, abort */
1767        INB(np, nc_mbox1);
1768        udelay(2000); /* The 895 needs time for the bus mode to settle */
1769
1770        OUTB(np, nc_scntl0, np->rv_scntl0 | 0xc0);
1771                                        /*  full arb., ena parity, par->ATN  */
1772        OUTB(np, nc_scntl1, 0x00);              /*  odd parity, and remove CRST!! */
1773
1774        sym_selectclock(np, np->rv_scntl3);     /* Select SCSI clock */
1775
1776        OUTB(np, nc_scid  , RRE|np->myaddr);    /* Adapter SCSI address */
1777        OUTW(np, nc_respid, 1ul<<np->myaddr);   /* Id to respond to */
1778        OUTB(np, nc_istat , SIGP        );              /*  Signal Process */
1779        OUTB(np, nc_dmode , np->rv_dmode);              /* Burst length, dma mode */
1780        OUTB(np, nc_ctest5, np->rv_ctest5);     /* Large fifo + large burst */
1781
1782        OUTB(np, nc_dcntl , NOCOM|np->rv_dcntl);        /* Protect SFBR */
1783        OUTB(np, nc_ctest3, np->rv_ctest3);     /* Write and invalidate */
1784        OUTB(np, nc_ctest4, np->rv_ctest4);     /* Master parity checking */
1785
1786        /* Extended Sreq/Sack filtering not supported on the C10 */
1787        if (np->features & FE_C10)
1788                OUTB(np, nc_stest2, np->rv_stest2);
1789        else
1790                OUTB(np, nc_stest2, EXT|np->rv_stest2);
1791
1792        OUTB(np, nc_stest3, TE);                        /* TolerANT enable */
1793        OUTB(np, nc_stime0, 0x0c);                      /* HTH disabled  STO 0.25 sec */
1794
1795        /*
1796         *  For now, disable AIP generation on C1010-66.
1797         */
1798        if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_66)
1799                OUTB(np, nc_aipcntl1, DISAIP);
1800
1801        /*
1802         *  C10101 rev. 0 errata.
1803         *  Errant SGE's when in narrow. Write bits 4 & 5 of
1804         *  STEST1 register to disable SGE. We probably should do 
1805         *  that from SCRIPTS for each selection/reselection, but 
1806         *  I just don't want. :)
1807         */
1808        if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
1809            pdev->revision < 1)
1810                OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30);
1811
1812        /*
1813         *  DEL 441 - 53C876 Rev 5 - Part Number 609-0392787/2788 - ITEM 2.
1814         *  Disable overlapped arbitration for some dual function devices, 
1815         *  regardless revision id (kind of post-chip-design feature. ;-))
1816         */
1817        if (pdev->device == PCI_DEVICE_ID_NCR_53C875)
1818                OUTB(np, nc_ctest0, (1<<5));
1819        else if (pdev->device == PCI_DEVICE_ID_NCR_53C896)
1820                np->rv_ccntl0 |= DPR;
1821
1822        /*
1823         *  Write CCNTL0/CCNTL1 for chips capable of 64 bit addressing 
1824         *  and/or hardware phase mismatch, since only such chips 
1825         *  seem to support those IO registers.
1826         */
1827        if (np->features & (FE_DAC|FE_NOPM)) {
1828                OUTB(np, nc_ccntl0, np->rv_ccntl0);
1829                OUTB(np, nc_ccntl1, np->rv_ccntl1);
1830        }
1831
1832#if     SYM_CONF_DMA_ADDRESSING_MODE == 2
1833        /*
1834         *  Set up scratch C and DRS IO registers to map the 32 bit 
1835         *  DMA address range our data structures are located in.
1836         */
1837        if (use_dac(np)) {
1838                np->dmap_bah[0] = 0;    /* ??? */
1839                OUTL(np, nc_scrx[0], np->dmap_bah[0]);
1840                OUTL(np, nc_drs, np->dmap_bah[0]);
1841        }
1842#endif
1843
1844        /*
1845         *  If phase mismatch handled by scripts (895A/896/1010),
1846         *  set PM jump addresses.
1847         */
1848        if (np->features & FE_NOPM) {
1849                OUTL(np, nc_pmjad1, SCRIPTB_BA(np, pm_handle));
1850                OUTL(np, nc_pmjad2, SCRIPTB_BA(np, pm_handle));
1851        }
1852
1853        /*
1854         *    Enable GPIO0 pin for writing if LED support from SCRIPTS.
1855         *    Also set GPIO5 and clear GPIO6 if hardware LED control.
1856         */
1857        if (np->features & FE_LED0)
1858                OUTB(np, nc_gpcntl, INB(np, nc_gpcntl) & ~0x01);
1859        else if (np->features & FE_LEDC)
1860                OUTB(np, nc_gpcntl, (INB(np, nc_gpcntl) & ~0x41) | 0x20);
1861
1862        /*
1863         *      enable ints
1864         */
1865        OUTW(np, nc_sien , STO|HTH|MA|SGE|UDC|RST|PAR);
1866        OUTB(np, nc_dien , MDPE|BF|SSI|SIR|IID);
1867
1868        /*
1869         *  For 895/6 enable SBMC interrupt and save current SCSI bus mode.
1870         *  Try to eat the spurious SBMC interrupt that may occur when 
1871         *  we reset the chip but not the SCSI BUS (at initialization).
1872         */
1873        if (np->features & (FE_ULTRA2|FE_ULTRA3)) {
1874                OUTONW(np, nc_sien, SBMC);
1875                if (reason == 0) {
1876                        INB(np, nc_mbox1);
1877                        mdelay(100);
1878                        INW(np, nc_sist);
1879                }
1880                np->scsi_mode = INB(np, nc_stest4) & SMODE;
1881        }
1882
1883        /*
1884         *  Fill in target structure.
1885         *  Reinitialize usrsync.
1886         *  Reinitialize usrwide.
1887         *  Prepare sync negotiation according to actual SCSI bus mode.
1888         */
1889        for (i=0;i<SYM_CONF_MAX_TARGET;i++) {
1890                struct sym_tcb *tp = &np->target[i];
1891
1892                tp->to_reset  = 0;
1893                tp->head.sval = 0;
1894                tp->head.wval = np->rv_scntl3;
1895                tp->head.uval = 0;
1896                if (tp->lun0p)
1897                        tp->lun0p->to_clear = 0;
1898                if (tp->lunmp) {
1899                        int ln;
1900
1901                        for (ln = 1; ln < SYM_CONF_MAX_LUN; ln++)
1902                                if (tp->lunmp[ln])
1903                                        tp->lunmp[ln]->to_clear = 0;
1904                }
1905        }
1906
1907        /*
1908         *  Download SCSI SCRIPTS to on-chip RAM if present,
1909         *  and start script processor.
1910         *  We do the download preferently from the CPU.
1911         *  For platforms that may not support PCI memory mapping,
1912         *  we use simple SCRIPTS that performs MEMORY MOVEs.
1913         */
1914        phys = SCRIPTA_BA(np, init);
1915        if (np->ram_ba) {
1916                if (sym_verbose >= 2)
1917                        printf("%s: Downloading SCSI SCRIPTS.\n", sym_name(np));
1918                memcpy_toio(np->s.ramaddr, np->scripta0, np->scripta_sz);
1919                if (np->features & FE_RAM8K) {
1920                        memcpy_toio(np->s.ramaddr + 4096, np->scriptb0, np->scriptb_sz);
1921                        phys = scr_to_cpu(np->scr_ram_seg);
1922                        OUTL(np, nc_mmws, phys);
1923                        OUTL(np, nc_mmrs, phys);
1924                        OUTL(np, nc_sfs,  phys);
1925                        phys = SCRIPTB_BA(np, start64);
1926                }
1927        }
1928
1929        np->istat_sem = 0;
1930
1931        OUTL(np, nc_dsa, np->hcb_ba);
1932        OUTL_DSP(np, phys);
1933
1934        /*
1935         *  Notify the XPT about the RESET condition.
1936         */
1937        if (reason != 0)
1938                sym_xpt_async_bus_reset(np);
1939}
1940
1941/*
1942 *  Switch trans mode for current job and its target.
1943 */
1944static void sym_settrans(struct sym_hcb *np, int target, u_char opts, u_char ofs,
1945                         u_char per, u_char wide, u_char div, u_char fak)
1946{
1947        SYM_QUEHEAD *qp;
1948        u_char sval, wval, uval;
1949        struct sym_tcb *tp = &np->target[target];
1950
1951        assert(target == (INB(np, nc_sdid) & 0x0f));
1952
1953        sval = tp->head.sval;
1954        wval = tp->head.wval;
1955        uval = tp->head.uval;
1956
1957#if 0
1958        printf("XXXX sval=%x wval=%x uval=%x (%x)\n", 
1959                sval, wval, uval, np->rv_scntl3);
1960#endif
1961        /*
1962         *  Set the offset.
1963         */
1964        if (!(np->features & FE_C10))
1965                sval = (sval & ~0x1f) | ofs;
1966        else
1967                sval = (sval & ~0x3f) | ofs;
1968
1969        /*
1970         *  Set the sync divisor and extra clock factor.
1971         */
1972        if (ofs != 0) {
1973                wval = (wval & ~0x70) | ((div+1) << 4);
1974                if (!(np->features & FE_C10))
1975                        sval = (sval & ~0xe0) | (fak << 5);
1976                else {
1977                        uval = uval & ~(XCLKH_ST|XCLKH_DT|XCLKS_ST|XCLKS_DT);
1978                        if (fak >= 1) uval |= (XCLKH_ST|XCLKH_DT);
1979                        if (fak >= 2) uval |= (XCLKS_ST|XCLKS_DT);
1980                }
1981        }
1982
1983        /*
1984         *  Set the bus width.
1985         */
1986        wval = wval & ~EWS;
1987        if (wide != 0)
1988                wval |= EWS;
1989
1990        /*
1991         *  Set misc. ultra enable bits.
1992         */
1993        if (np->features & FE_C10) {
1994                uval = uval & ~(U3EN|AIPCKEN);
1995                if (opts)       {
1996                        assert(np->features & FE_U3EN);
1997                        uval |= U3EN;
1998                }
1999        } else {
2000                wval = wval & ~ULTRA;
2001                if (per <= 12)  wval |= ULTRA;
2002        }
2003
2004        /*
2005         *   Stop there if sync parameters are unchanged.
2006         */
2007        if (tp->head.sval == sval && 
2008            tp->head.wval == wval &&
2009            tp->head.uval == uval)
2010                return;
2011        tp->head.sval = sval;
2012        tp->head.wval = wval;
2013        tp->head.uval = uval;
2014
2015        /*
2016         *  Disable extended Sreq/Sack filtering if per < 50.
2017         *  Not supported on the C1010.
2018         */
2019        if (per < 50 && !(np->features & FE_C10))
2020                OUTOFFB(np, nc_stest2, EXT);
2021
2022        /*
2023         *  set actual value and sync_status
2024         */
2025        OUTB(np, nc_sxfer,  tp->head.sval);
2026        OUTB(np, nc_scntl3, tp->head.wval);
2027
2028        if (np->features & FE_C10) {
2029                OUTB(np, nc_scntl4, tp->head.uval);
2030        }
2031
2032        /*
2033         *  patch ALL busy ccbs of this target.
2034         */
2035        FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
2036                struct sym_ccb *cp;
2037                cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
2038                if (cp->target != target)
2039                        continue;
2040                cp->phys.select.sel_scntl3 = tp->head.wval;
2041                cp->phys.select.sel_sxfer  = tp->head.sval;
2042                if (np->features & FE_C10) {
2043                        cp->phys.select.sel_scntl4 = tp->head.uval;
2044                }
2045        }
2046}
2047
2048static void sym_announce_transfer_rate(struct sym_tcb *tp)
2049{
2050        struct scsi_target *starget = tp->starget;
2051
2052        if (tp->tprint.period != spi_period(starget) ||
2053            tp->tprint.offset != spi_offset(starget) ||
2054            tp->tprint.width != spi_width(starget) ||
2055            tp->tprint.iu != spi_iu(starget) ||
2056            tp->tprint.dt != spi_dt(starget) ||
2057            tp->tprint.qas != spi_qas(starget) ||
2058            !tp->tprint.check_nego) {
2059                tp->tprint.period = spi_period(starget);
2060                tp->tprint.offset = spi_offset(starget);
2061                tp->tprint.width = spi_width(starget);
2062                tp->tprint.iu = spi_iu(starget);
2063                tp->tprint.dt = spi_dt(starget);
2064                tp->tprint.qas = spi_qas(starget);
2065                tp->tprint.check_nego = 1;
2066
2067                spi_display_xfer_agreement(starget);
2068        }
2069}
2070
2071/*
2072 *  We received a WDTR.
2073 *  Let everything be aware of the changes.
2074 */
2075static void sym_setwide(struct sym_hcb *np, int target, u_char wide)
2076{
2077        struct sym_tcb *tp = &np->target[target];
2078        struct scsi_target *starget = tp->starget;
2079
2080        sym_settrans(np, target, 0, 0, 0, wide, 0, 0);
2081
2082        if (wide)
2083                tp->tgoal.renego = NS_WIDE;
2084        else
2085                tp->tgoal.renego = 0;
2086        tp->tgoal.check_nego = 0;
2087        tp->tgoal.width = wide;
2088        spi_offset(starget) = 0;
2089        spi_period(starget) = 0;
2090        spi_width(starget) = wide;
2091        spi_iu(starget) = 0;
2092        spi_dt(starget) = 0;
2093        spi_qas(starget) = 0;
2094
2095        if (sym_verbose >= 3)
2096                sym_announce_transfer_rate(tp);
2097}
2098
2099/*
2100 *  We received a SDTR.
2101 *  Let everything be aware of the changes.
2102 */
2103static void
2104sym_setsync(struct sym_hcb *np, int target,
2105            u_char ofs, u_char per, u_char div, u_char fak)
2106{
2107        struct sym_tcb *tp = &np->target[target];
2108        struct scsi_target *starget = tp->starget;
2109        u_char wide = (tp->head.wval & EWS) ? BUS_16_BIT : BUS_8_BIT;
2110
2111        sym_settrans(np, target, 0, ofs, per, wide, div, fak);
2112
2113        if (wide)
2114                tp->tgoal.renego = NS_WIDE;
2115        else if (ofs)
2116                tp->tgoal.renego = NS_SYNC;
2117        else
2118                tp->tgoal.renego = 0;
2119        spi_period(starget) = per;
2120        spi_offset(starget) = ofs;
2121        spi_iu(starget) = spi_dt(starget) = spi_qas(starget) = 0;
2122
2123        if (!tp->tgoal.dt && !tp->tgoal.iu && !tp->tgoal.qas) {
2124                tp->tgoal.period = per;
2125                tp->tgoal.offset = ofs;
2126                tp->tgoal.check_nego = 0;
2127        }
2128
2129        sym_announce_transfer_rate(tp);
2130}
2131
2132/*
2133 *  We received a PPR.
2134 *  Let everything be aware of the changes.
2135 */
2136static void 
2137sym_setpprot(struct sym_hcb *np, int target, u_char opts, u_char ofs,
2138             u_char per, u_char wide, u_char div, u_char fak)
2139{
2140        struct sym_tcb *tp = &np->target[target];
2141        struct scsi_target *starget = tp->starget;
2142
2143        sym_settrans(np, target, opts, ofs, per, wide, div, fak);
2144
2145        if (wide || ofs)
2146                tp->tgoal.renego = NS_PPR;
2147        else
2148                tp->tgoal.renego = 0;
2149        spi_width(starget) = tp->tgoal.width = wide;
2150        spi_period(starget) = tp->tgoal.period = per;
2151        spi_offset(starget) = tp->tgoal.offset = ofs;
2152        spi_iu(starget) = tp->tgoal.iu = !!(opts & PPR_OPT_IU);
2153        spi_dt(starget) = tp->tgoal.dt = !!(opts & PPR_OPT_DT);
2154        spi_qas(starget) = tp->tgoal.qas = !!(opts & PPR_OPT_QAS);
2155        tp->tgoal.check_nego = 0;
2156
2157        sym_announce_transfer_rate(tp);
2158}
2159
2160/*
2161 *  generic recovery from scsi interrupt
2162 *
2163 *  The doc says that when the chip gets an SCSI interrupt,
2164 *  it tries to stop in an orderly fashion, by completing 
2165 *  an instruction fetch that had started or by flushing 
2166 *  the DMA fifo for a write to memory that was executing.
2167 *  Such a fashion is not enough to know if the instruction 
2168 *  that was just before the current DSP value has been 
2169 *  executed or not.
2170 *
2171 *  There are some small SCRIPTS sections that deal with 
2172 *  the start queue and the done queue that may break any 
2173 *  assomption from the C code if we are interrupted 
2174 *  inside, so we reset if this happens. Btw, since these 
2175 *  SCRIPTS sections are executed while the SCRIPTS hasn't 
2176 *  started SCSI operations, it is very unlikely to happen.
2177 *
2178 *  All the driver data structures are supposed to be 
2179 *  allocated from the same 4 GB memory window, so there 
2180 *  is a 1 to 1 relationship between DSA and driver data 
2181 *  structures. Since we are careful :) to invalidate the 
2182 *  DSA when we complete a command or when the SCRIPTS 
2183 *  pushes a DSA into a queue, we can trust it when it 
2184 *  points to a CCB.
2185 */
2186static void sym_recover_scsi_int (struct sym_hcb *np, u_char hsts)
2187{
2188        u32     dsp     = INL(np, nc_dsp);
2189        u32     dsa     = INL(np, nc_dsa);
2190        struct sym_ccb *cp      = sym_ccb_from_dsa(np, dsa);
2191
2192        /*
2193         *  If we haven't been interrupted inside the SCRIPTS 
2194         *  critical pathes, we can safely restart the SCRIPTS 
2195         *  and trust the DSA value if it matches a CCB.
2196         */
2197        if ((!(dsp > SCRIPTA_BA(np, getjob_begin) &&
2198               dsp < SCRIPTA_BA(np, getjob_end) + 1)) &&
2199            (!(dsp > SCRIPTA_BA(np, ungetjob) &&
2200               dsp < SCRIPTA_BA(np, reselect) + 1)) &&
2201            (!(dsp > SCRIPTB_BA(np, sel_for_abort) &&
2202               dsp < SCRIPTB_BA(np, sel_for_abort_1) + 1)) &&
2203            (!(dsp > SCRIPTA_BA(np, done) &&
2204               dsp < SCRIPTA_BA(np, done_end) + 1))) {
2205                OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo  */
2206                OUTB(np, nc_stest3, TE|CSF);            /* clear scsi fifo */
2207                /*
2208                 *  If we have a CCB, let the SCRIPTS call us back for 
2209                 *  the handling of the error with SCRATCHA filled with 
2210                 *  STARTPOS. This way, we will be able to freeze the 
2211                 *  device queue and requeue awaiting IOs.
2212                 */
2213                if (cp) {
2214                        cp->host_status = hsts;
2215                        OUTL_DSP(np, SCRIPTA_BA(np, complete_error));
2216                }
2217                /*
2218                 *  Otherwise just restart the SCRIPTS.
2219                 */
2220                else {
2221                        OUTL(np, nc_dsa, 0xffffff);
2222                        OUTL_DSP(np, SCRIPTA_BA(np, start));
2223                }
2224        }
2225        else
2226                goto reset_all;
2227
2228        return;
2229
2230reset_all:
2231        sym_start_reset(np);
2232}
2233
2234/*
2235 *  chip exception handler for selection timeout
2236 */
2237static void sym_int_sto (struct sym_hcb *np)
2238{
2239        u32 dsp = INL(np, nc_dsp);
2240
2241        if (DEBUG_FLAGS & DEBUG_TINY) printf ("T");
2242
2243        if (dsp == SCRIPTA_BA(np, wf_sel_done) + 8)
2244                sym_recover_scsi_int(np, HS_SEL_TIMEOUT);
2245        else
2246                sym_start_reset(np);
2247}
2248
2249/*
2250 *  chip exception handler for unexpected disconnect
2251 */
2252static void sym_int_udc (struct sym_hcb *np)
2253{
2254        printf ("%s: unexpected disconnect\n", sym_name(np));
2255        sym_recover_scsi_int(np, HS_UNEXPECTED);
2256}
2257
2258/*
2259 *  chip exception handler for SCSI bus mode change
2260 *
2261 *  spi2-r12 11.2.3 says a transceiver mode change must 
2262 *  generate a reset event and a device that detects a reset 
2263 *  event shall initiate a hard reset. It says also that a
2264 *  device that detects a mode change shall set data transfer 
2265 *  mode to eight bit asynchronous, etc...
2266 *  So, just reinitializing all except chip should be enough.
2267 */
2268static void sym_int_sbmc(struct Scsi_Host *shost)
2269{
2270        struct sym_hcb *np = sym_get_hcb(shost);
2271        u_char scsi_mode = INB(np, nc_stest4) & SMODE;
2272
2273        /*
2274         *  Notify user.
2275         */
2276        printf("%s: SCSI BUS mode change from %s to %s.\n", sym_name(np),
2277                sym_scsi_bus_mode(np->scsi_mode), sym_scsi_bus_mode(scsi_mode));
2278
2279        /*
2280         *  Should suspend command processing for a few seconds and 
2281         *  reinitialize all except the chip.
2282         */
2283        sym_start_up(shost, 2);
2284}
2285
2286/*
2287 *  chip exception handler for SCSI parity error.
2288 *
2289 *  When the chip detects a SCSI parity error and is 
2290 *  currently executing a (CH)MOV instruction, it does 
2291 *  not interrupt immediately, but tries to finish the 
2292 *  transfer of the current scatter entry before 
2293 *  interrupting. The following situations may occur:
2294 *
2295 *  - The complete scatter entry has been transferred 
2296 *    without the device having changed phase.
2297 *    The chip will then interrupt with the DSP pointing 
2298 *    to the instruction that follows the MOV.
2299 *
2300 *  - A phase mismatch occurs before the MOV finished 
2301 *    and phase errors are to be handled by the C code.
2302 *    The chip will then interrupt with both PAR and MA 
2303 *    conditions set.
2304 *
2305 *  - A phase mismatch occurs before the MOV finished and 
2306 *    phase errors are to be handled by SCRIPTS.
2307 *    The chip will load the DSP with the phase mismatch 
2308 *    JUMP address and interrupt the host processor.
2309 */
2310static void sym_int_par (struct sym_hcb *np, u_short sist)
2311{
2312        u_char  hsts    = INB(np, HS_PRT);
2313        u32     dsp     = INL(np, nc_dsp);
2314        u32     dbc     = INL(np, nc_dbc);
2315        u32     dsa     = INL(np, nc_dsa);
2316        u_char  sbcl    = INB(np, nc_sbcl);
2317        u_char  cmd     = dbc >> 24;
2318        int phase       = cmd & 7;
2319        struct sym_ccb *cp      = sym_ccb_from_dsa(np, dsa);
2320
2321        if (printk_ratelimit())
2322                printf("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n",
2323                        sym_name(np), hsts, dbc, sbcl);
2324
2325        /*
2326         *  Check that the chip is connected to the SCSI BUS.
2327         */
2328        if (!(INB(np, nc_scntl1) & ISCON)) {
2329                sym_recover_scsi_int(np, HS_UNEXPECTED);
2330                return;
2331        }
2332
2333        /*
2334         *  If the nexus is not clearly identified, reset the bus.
2335         *  We will try to do better later.
2336         */
2337        if (!cp)
2338                goto reset_all;
2339
2340        /*
2341         *  Check instruction was a MOV, direction was INPUT and 
2342         *  ATN is asserted.
2343         */
2344        if ((cmd & 0xc0) || !(phase & 1) || !(sbcl & 0x8))
2345                goto reset_all;
2346
2347        /*
2348         *  Keep track of the parity error.
2349         */
2350        OUTONB(np, HF_PRT, HF_EXT_ERR);
2351        cp->xerr_status |= XE_PARITY_ERR;
2352
2353        /*
2354         *  Prepare the message to send to the device.
2355         */
2356        np->msgout[0] = (phase == 7) ? M_PARITY : M_ID_ERROR;
2357
2358        /*
2359         *  If the old phase was DATA IN phase, we have to deal with
2360         *  the 3 situations described above.
2361         *  For other input phases (MSG IN and STATUS), the device 
2362         *  must resend the whole thing that failed parity checking 
2363         *  or signal error. So, jumping to dispatcher should be OK.
2364         */
2365        if (phase == 1 || phase == 5) {
2366                /* Phase mismatch handled by SCRIPTS */
2367                if (dsp == SCRIPTB_BA(np, pm_handle))
2368                        OUTL_DSP(np, dsp);
2369                /* Phase mismatch handled by the C code */
2370                else if (sist & MA)
2371                        sym_int_ma (np);
2372                /* No phase mismatch occurred */
2373                else {
2374                        sym_set_script_dp (np, cp, dsp);
2375                        OUTL_DSP(np, SCRIPTA_BA(np, dispatch));
2376                }
2377        }
2378        else if (phase == 7)    /* We definitely cannot handle parity errors */
2379#if 1                           /* in message-in phase due to the relection  */
2380                goto reset_all; /* path and various message anticipations.   */
2381#else
2382                OUTL_DSP(np, SCRIPTA_BA(np, clrack));
2383#endif
2384        else
2385                OUTL_DSP(np, SCRIPTA_BA(np, dispatch));
2386        return;
2387
2388reset_all:
2389        sym_start_reset(np);
2390        return;
2391}
2392
2393/*
2394 *  chip exception handler for phase errors.
2395 *
2396 *  We have to construct a new transfer descriptor,
2397 *  to transfer the rest of the current block.
2398 */
2399static void sym_int_ma (struct sym_hcb *np)
2400{
2401        u32     dbc;
2402        u32     rest;
2403        u32     dsp;
2404        u32     dsa;
2405        u32     nxtdsp;
2406        u32     *vdsp;
2407        u32     oadr, olen;
2408        u32     *tblp;
2409        u32     newcmd;
2410        u_int   delta;
2411        u_char  cmd;
2412        u_char  hflags, hflags0;
2413        struct  sym_pmc *pm;
2414        struct sym_ccb *cp;
2415
2416        dsp     = INL(np, nc_dsp);
2417        dbc     = INL(np, nc_dbc);
2418        dsa     = INL(np, nc_dsa);
2419
2420        cmd     = dbc >> 24;
2421        rest    = dbc & 0xffffff;
2422        delta   = 0;
2423
2424        /*
2425         *  locate matching cp if any.
2426         */
2427        cp = sym_ccb_from_dsa(np, dsa);
2428
2429        /*
2430         *  Donnot take into account dma fifo and various buffers in 
2431         *  INPUT phase since the chip flushes everything before 
2432         *  raising the MA interrupt for interrupted INPUT phases.
2433         *  For DATA IN phase, we will check for the SWIDE later.
2434         */
2435        if ((cmd & 7) != 1 && (cmd & 7) != 5) {
2436                u_char ss0, ss2;
2437
2438                if (np->features & FE_DFBC)
2439                        delta = INW(np, nc_dfbc);
2440                else {
2441                        u32 dfifo;
2442
2443                        /*
2444                         * Read DFIFO, CTEST[4-6] using 1 PCI bus ownership.
2445                         */
2446                        dfifo = INL(np, nc_dfifo);
2447
2448                        /*
2449                         *  Calculate remaining bytes in DMA fifo.
2450                         *  (CTEST5 = dfifo >> 16)
2451                         */
2452                        if (dfifo & (DFS << 16))
2453                                delta = ((((dfifo >> 8) & 0x300) |
2454                                          (dfifo & 0xff)) - rest) & 0x3ff;
2455                        else
2456                                delta = ((dfifo & 0xff) - rest) & 0x7f;
2457                }
2458
2459                /*
2460                 *  The data in the dma fifo has not been transferred to
2461                 *  the target -> add the amount to the rest
2462                 *  and clear the data.
2463                 *  Check the sstat2 register in case of wide transfer.
2464                 */
2465                rest += delta;
2466                ss0  = INB(np, nc_sstat0);
2467                if (ss0 & OLF) rest++;
2468                if (!(np->features & FE_C10))
2469                        if (ss0 & ORF) rest++;
2470                if (cp && (cp->phys.select.sel_scntl3 & EWS)) {
2471                        ss2 = INB(np, nc_sstat2);
2472                        if (ss2 & OLF1) rest++;
2473                        if (!(np->features & FE_C10))
2474                                if (ss2 & ORF1) rest++;
2475                }
2476
2477                /*
2478                 *  Clear fifos.
2479                 */
2480                OUTB(np, nc_ctest3, np->rv_ctest3 | CLF);       /* dma fifo  */
2481                OUTB(np, nc_stest3, TE|CSF);            /* scsi fifo */
2482        }
2483
2484        /*
2485         *  log the information
2486         */
2487        if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE))
2488                printf ("P%x%x RL=%d D=%d ", cmd&7, INB(np, nc_sbcl)&7,
2489                        (unsigned) rest, (unsigned) delta);
2490
2491        /*
2492         *  try to find the interrupted script command,
2493         *  and the address at which to continue.
2494         */
2495        vdsp    = NULL;
2496        nxtdsp  = 0;
2497        if      (dsp >  np->scripta_ba &&
2498                 dsp <= np->scripta_ba + np->scripta_sz) {
2499                vdsp = (u32 *)((char*)np->scripta0 + (dsp-np->scripta_ba-8));
2500                nxtdsp = dsp;
2501        }
2502        else if (dsp >  np->scriptb_ba &&
2503                 dsp <= np->scriptb_ba + np->scriptb_sz) {
2504                vdsp = (u32 *)((char*)np->scriptb0 + (dsp-np->scriptb_ba-8));
2505                nxtdsp = dsp;
2506        }
2507
2508        /*
2509         *  log the information
2510         */
2511        if (DEBUG_FLAGS & DEBUG_PHASE) {
2512                printf ("\nCP=%p DSP=%x NXT=%x VDSP=%p CMD=%x ",
2513                        cp, (unsigned)dsp, (unsigned)nxtdsp, vdsp, cmd);
2514        }
2515
2516        if (!vdsp) {
2517                printf ("%s: interrupted SCRIPT address not found.\n", 
2518                        sym_name (np));
2519                goto reset_all;
2520        }
2521
2522        if (!cp) {
2523                printf ("%s: SCSI phase error fixup: CCB already dequeued.\n", 
2524                        sym_name (np));
2525                goto reset_all;
2526        }
2527
2528        /*
2529         *  get old startaddress and old length.
2530         */
2531        oadr = scr_to_cpu(vdsp[1]);
2532
2533        if (cmd & 0x10) {       /* Table indirect */
2534                tblp = (u32 *) ((char*) &cp->phys + oadr);
2535                olen = scr_to_cpu(tblp[0]);
2536                oadr = scr_to_cpu(tblp[1]);
2537        } else {
2538                tblp = (u32 *) 0;
2539                olen = scr_to_cpu(vdsp[0]) & 0xffffff;
2540        }
2541
2542        if (DEBUG_FLAGS & DEBUG_PHASE) {
2543                printf ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n",
2544                        (unsigned) (scr_to_cpu(vdsp[0]) >> 24),
2545                        tblp,
2546                        (unsigned) olen,
2547                        (unsigned) oadr);
2548        }
2549
2550        /*
2551         *  check cmd against assumed interrupted script command.
2552         *  If dt data phase, the MOVE instruction hasn't bit 4 of 
2553         *  the phase.
2554         */
2555        if (((cmd & 2) ? cmd : (cmd & ~4)) != (scr_to_cpu(vdsp[0]) >> 24)) {
2556                sym_print_addr(cp->cmd,
2557                        "internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n",
2558                        cmd, scr_to_cpu(vdsp[0]) >> 24);
2559
2560                goto reset_all;
2561        }
2562
2563        /*
2564         *  if old phase not dataphase, leave here.
2565         */
2566        if (cmd & 2) {
2567                sym_print_addr(cp->cmd,
2568                        "phase change %x-%x %d@%08x resid=%d.\n",
2569                        cmd&7, INB(np, nc_sbcl)&7, (unsigned)olen,
2570                        (unsigned)oadr, (unsigned)rest);
2571                goto unexpected_phase;
2572        }
2573
2574        /*
2575         *  Choose the correct PM save area.
2576         *
2577         *  Look at the PM_SAVE SCRIPT if you want to understand 
2578         *  this stuff. The equivalent code is implemented in 
2579         *  SCRIPTS for the 895A, 896 and 1010 that are able to 
2580         *  handle PM from the SCRIPTS processor.
2581         */
2582        hflags0 = INB(np, HF_PRT);
2583        hflags = hflags0;
2584
2585        if (hflags & (HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED)) {
2586                if (hflags & HF_IN_PM0)
2587                        nxtdsp = scr_to_cpu(cp->phys.pm0.ret);
2588                else if (hflags & HF_IN_PM1)
2589                        nxtdsp = scr_to_cpu(cp->phys.pm1.ret);
2590
2591                if (hflags & HF_DP_SAVED)
2592                        hflags ^= HF_ACT_PM;
2593        }
2594
2595        if (!(hflags & HF_ACT_PM)) {
2596                pm = &cp->phys.pm0;
2597                newcmd = SCRIPTA_BA(np, pm0_data);
2598        }
2599        else {
2600                pm = &cp->phys.pm1;
2601                newcmd = SCRIPTA_BA(np, pm1_data);
2602        }
2603
2604        hflags &= ~(HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED);
2605        if (hflags != hflags0)
2606                OUTB(np, HF_PRT, hflags);
2607
2608        /*
2609         *  fillin the phase mismatch context
2610         */
2611        pm->sg.addr = cpu_to_scr(oadr + olen - rest);
2612        pm->sg.size = cpu_to_scr(rest);
2613        pm->ret     = cpu_to_scr(nxtdsp);
2614
2615        /*
2616         *  If we have a SWIDE,
2617         *  - prepare the address to write the SWIDE from SCRIPTS,
2618         *  - compute the SCRIPTS address to restart from,
2619         *  - move current data pointer context by one byte.
2620         */
2621        nxtdsp = SCRIPTA_BA(np, dispatch);
2622        if ((cmd & 7) == 1 && cp && (cp->phys.select.sel_scntl3 & EWS) &&
2623            (INB(np, nc_scntl2) & WSR)) {
2624                u32 tmp;
2625
2626                /*
2627                 *  Set up the table indirect for the MOVE
2628                 *  of the residual byte and adjust the data 
2629                 *  pointer context.
2630                 */
2631                tmp = scr_to_cpu(pm->sg.addr);
2632                cp->phys.wresid.addr = cpu_to_scr(tmp);
2633                pm->sg.addr = cpu_to_scr(tmp + 1);
2634                tmp = scr_to_cpu(pm->sg.size);
2635                cp->phys.wresid.size = cpu_to_scr((tmp&0xff000000) | 1);
2636                pm->sg.size = cpu_to_scr(tmp - 1);
2637
2638                /*
2639                 *  If only the residual byte is to be moved, 
2640                 *  no PM context is needed.
2641                 */
2642                if ((tmp&0xffffff) == 1)
2643                        newcmd = pm->ret;
2644
2645                /*
2646                 *  Prepare the address of SCRIPTS that will 
2647                 *  move the residual byte to memory.
2648                 */
2649                nxtdsp = SCRIPTB_BA(np, wsr_ma_helper);
2650        }
2651
2652        if (DEBUG_FLAGS & DEBUG_PHASE) {
2653                sym_print_addr(cp->cmd, "PM %x %x %x / %x %x %x.\n",
2654                        hflags0, hflags, newcmd,
2655                        (unsigned)scr_to_cpu(pm->sg.addr),
2656                        (unsigned)scr_to_cpu(pm->sg.size),
2657                        (unsigned)scr_to_cpu(pm->ret));
2658        }
2659
2660        /*
2661         *  Restart the SCRIPTS processor.
2662         */
2663        sym_set_script_dp (np, cp, newcmd);
2664        OUTL_DSP(np, nxtdsp);
2665        return;
2666
2667        /*
2668         *  Unexpected phase changes that occurs when the current phase 
2669         *  is not a DATA IN or DATA OUT phase are due to error conditions.
2670         *  Such event may only happen when the SCRIPTS is using a 
2671         *  multibyte SCSI MOVE.
2672         *
2673         *  Phase change                Some possible cause
2674         *
2675         *  COMMAND  --> MSG IN SCSI parity error detected by target.
2676         *  COMMAND  --> STATUS Bad command or refused by target.
2677         *  MSG OUT  --> MSG IN     Message rejected by target.
2678         *  MSG OUT  --> COMMAND    Bogus target that discards extended
2679         *                      negotiation messages.
2680         *
2681         *  The code below does not care of the new phase and so 
2682         *  trusts the target. Why to annoy it ?
2683         *  If the interrupted phase is COMMAND phase, we restart at
2684         *  dispatcher.
2685         *  If a target does not get all the messages after selection, 
2686         *  the code assumes blindly that the target discards extended 
2687         *  messages and clears the negotiation status.
2688         *  If the target does not want all our response to negotiation,
2689         *  we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids 
2690         *  bloat for such a should_not_happen situation).
2691         *  In all other situation, we reset the BUS.
2692         *  Are these assumptions reasonable ? (Wait and see ...)
2693         */
2694unexpected_phase:
2695        dsp -= 8;
2696        nxtdsp = 0;
2697
2698        switch (cmd & 7) {
2699        case 2: /* COMMAND phase */
2700                nxtdsp = SCRIPTA_BA(np, dispatch);
2701                break;
2702#if 0
2703        case 3: /* STATUS  phase */
2704                nxtdsp = SCRIPTA_BA(np, dispatch);
2705                break;
2706#endif
2707        case 6: /* MSG OUT phase */
2708                /*
2709                 *  If the device may want to use untagged when we want 
2710                 *  tagged, we prepare an IDENTIFY without disc. granted, 
2711                 *  since we will not be able to handle reselect.
2712                 *  Otherwise, we just don't care.
2713                 */
2714                if      (dsp == SCRIPTA_BA(np, send_ident)) {
2715                        if (cp->tag != NO_TAG && olen - rest <= 3) {
2716                                cp->host_status = HS_BUSY;
2717                                np->msgout[0] = IDENTIFY(0, cp->lun);
2718                                nxtdsp = SCRIPTB_BA(np, ident_break_atn);
2719                        }
2720                        else
2721                                nxtdsp = SCRIPTB_BA(np, ident_break);
2722                }
2723                else if (dsp == SCRIPTB_BA(np, send_wdtr) ||
2724                         dsp == SCRIPTB_BA(np, send_sdtr) ||
2725                         dsp == SCRIPTB_BA(np, send_ppr)) {
2726                        nxtdsp = SCRIPTB_BA(np, nego_bad_phase);
2727                        if (dsp == SCRIPTB_BA(np, send_ppr)) {
2728                                struct scsi_device *dev = cp->cmd->device;
2729                                dev->ppr = 0;
2730                        }
2731                }
2732                break;
2733#if 0
2734        case 7: /* MSG IN  phase */
2735                nxtdsp = SCRIPTA_BA(np, clrack);
2736                break;
2737#endif
2738        }
2739
2740        if (nxtdsp) {
2741                OUTL_DSP(np, nxtdsp);
2742                return;
2743        }
2744
2745reset_all:
2746        sym_start_reset(np);
2747}
2748
2749/*
2750 *  chip interrupt handler
2751 *
2752 *  In normal situations, interrupt conditions occur one at 
2753 *  a time. But when something bad happens on the SCSI BUS, 
2754 *  the chip may raise several interrupt flags before 
2755 *  stopping and interrupting the CPU. The additionnal 
2756 *  interrupt flags are stacked in some extra registers 
2757 *  after the SIP and/or DIP flag has been raised in the 
2758 *  ISTAT. After the CPU has read the interrupt condition 
2759 *  flag from SIST or DSTAT, the chip unstacks the other 
2760 *  interrupt flags and sets the corresponding bits in 
2761 *  SIST or DSTAT. Since the chip starts stacking once the 
2762 *  SIP or DIP flag is set, there is a small window of time 
2763 *  where the stacking does not occur.
2764 *
2765 *  Typically, multiple interrupt conditions may happen in 
2766 *  the following situations:
2767 *
2768 *  - SCSI parity error + Phase mismatch  (PAR|MA)
2769 *    When an parity error is detected in input phase 
2770 *    and the device switches to msg-in phase inside a 
2771 *    block MOV.
2772 *  - SCSI parity error + Unexpected disconnect (PAR|UDC)
2773 *    When a stupid device does not want to handle the 
2774 *    recovery of an SCSI parity error.
2775 *  - Some combinations of STO, PAR, UDC, ...
2776 *    When using non compliant SCSI stuff, when user is 
2777 *    doing non compliant hot tampering on the BUS, when 
2778 *    something really bad happens to a device, etc ...
2779 *
2780 *  The heuristic suggested by SYMBIOS to handle 
2781 *  multiple interrupts is to try unstacking all 
2782 *  interrupts conditions and to handle them on some 
2783 *  priority based on error severity.
2784 *  This will work when the unstacking has been 
2785 *  successful, but we cannot be 100 % sure of that, 
2786 *  since the CPU may have been faster to unstack than 
2787 *  the chip is able to stack. Hmmm ... But it seems that 
2788 *  such a situation is very unlikely to happen.
2789 *
2790 *  If this happen, for example STO caught by the CPU 
2791 *  then UDC happenning before the CPU have restarted 
2792 *  the SCRIPTS, the driver may wrongly complete the 
2793 *  same command on UDC, since the SCRIPTS didn't restart 
2794 *  and the DSA still points to the same command.
2795 *  We avoid this situation by setting the DSA to an 
2796 *  invalid value when the CCB is completed and before 
2797 *  restarting the SCRIPTS.
2798 *
2799 *  Another issue is that we need some section of our 
2800 *  recovery procedures to be somehow uninterruptible but 
2801 *  the SCRIPTS processor does not provides such a 
2802 *  feature. For this reason, we handle recovery preferently 
2803 *  from the C code and check against some SCRIPTS critical 
2804 *  sections from the C code.
2805 *
2806 *  Hopefully, the interrupt handling of the driver is now 
2807 *  able to resist to weird BUS error conditions, but donnot 
2808 *  ask me for any guarantee that it will never fail. :-)
2809 *  Use at your own decision and risk.
2810 */
2811
2812irqreturn_t sym_interrupt(struct Scsi_Host *shost)
2813{
2814        struct sym_data *sym_data = shost_priv(shost);
2815        struct sym_hcb *np = sym_data->ncb;
2816        struct pci_dev *pdev = sym_data->pdev;
2817        u_char  istat, istatc;
2818        u_char  dstat;
2819        u_short sist;
2820
2821        /*
2822         *  interrupt on the fly ?
2823         *  (SCRIPTS may still be running)
2824         *
2825         *  A `dummy read' is needed to ensure that the 
2826         *  clear of the INTF flag reaches the device 
2827         *  and that posted writes are flushed to memory
2828         *  before the scanning of the DONE queue.
2829         *  Note that SCRIPTS also (dummy) read to memory 
2830         *  prior to deliver the INTF interrupt condition.
2831         */
2832        istat = INB(np, nc_istat);
2833        if (istat & INTF) {
2834                OUTB(np, nc_istat, (istat & SIGP) | INTF | np->istat_sem);
2835                istat |= INB(np, nc_istat);             /* DUMMY READ */
2836                if (DEBUG_FLAGS & DEBUG_TINY) printf ("F ");
2837                sym_wakeup_done(np);
2838        }
2839
2840        if (!(istat & (SIP|DIP)))
2841                return (istat & INTF) ? IRQ_HANDLED : IRQ_NONE;
2842
2843#if 0   /* We should never get this one */
2844        if (istat & CABRT)
2845                OUTB(np, nc_istat, CABRT);
2846#endif
2847
2848        /*
2849         *  PAR and MA interrupts may occur at the same time,
2850         *  and we need to know of both in order to handle 
2851         *  this situation properly. We try to unstack SCSI 
2852         *  interrupts for that reason. BTW, I dislike a LOT 
2853         *  such a loop inside the interrupt routine.
2854         *  Even if DMA interrupt stacking is very unlikely to 
2855         *  happen, we also try unstacking these ones, since 
2856         *  this has no performance impact.
2857         */
2858        sist    = 0;
2859        dstat   = 0;
2860        istatc  = istat;
2861        do {
2862                if (istatc & SIP)
2863                        sist  |= INW(np, nc_sist);
2864                if (istatc & DIP)
2865                        dstat |= INB(np, nc_dstat);
2866                istatc = INB(np, nc_istat);
2867                istat |= istatc;
2868
2869                /* Prevent deadlock waiting on a condition that may
2870                 * never clear. */
2871                if (unlikely(sist == 0xffff && dstat == 0xff)) {
2872                        if (pci_channel_offline(pdev))
2873                                return IRQ_NONE;
2874                }
2875        } while (istatc & (SIP|DIP));
2876
2877        if (DEBUG_FLAGS & DEBUG_TINY)
2878                printf ("<%d|%x:%x|%x:%x>",
2879                        (int)INB(np, nc_scr0),
2880                        dstat,sist,
2881                        (unsigned)INL(np, nc_dsp),
2882                        (unsigned)INL(np, nc_dbc));
2883        /*
2884         *  On paper, a memory read barrier may be needed here to 
2885         *  prevent out of order LOADs by the CPU from having 
2886         *  prefetched stale data prior to DMA having occurred.
2887         *  And since we are paranoid ... :)
2888         */
2889        MEMORY_READ_BARRIER();
2890
2891        /*
2892         *  First, interrupts we want to service cleanly.
2893         *
2894         *  Phase mismatch (MA) is the most frequent interrupt 
2895         *  for chip earlier than the 896 and so we have to service 
2896         *  it as quickly as possible.
2897         *  A SCSI parity error (PAR) may be combined with a phase 
2898         *  mismatch condition (MA).
2899         *  Programmed interrupts (SIR) are used to call the C code 
2900         *  from SCRIPTS.
2901         *  The single step interrupt (SSI) is not used in this 
2902         *  driver.
2903         */
2904        if (!(sist  & (STO|GEN|HTH|SGE|UDC|SBMC|RST)) &&
2905            !(dstat & (MDPE|BF|ABRT|IID))) {
2906                if      (sist & PAR)    sym_int_par (np, sist);
2907                else if (sist & MA)     sym_int_ma (np);
2908                else if (dstat & SIR)   sym_int_sir(np);
2909                else if (dstat & SSI)   OUTONB_STD();
2910                else                    goto unknown_int;
2911                return IRQ_HANDLED;
2912        }
2913
2914        /*
2915         *  Now, interrupts that donnot happen in normal 
2916         *  situations and that we may need to recover from.
2917         *
2918         *  On SCSI RESET (RST), we reset everything.
2919         *  On SCSI BUS MODE CHANGE (SBMC), we complete all 
2920         *  active CCBs with RESET status, prepare all devices 
2921         *  for negotiating again and restart the SCRIPTS.
2922         *  On STO and UDC, we complete the CCB with the corres- 
2923         *  ponding status and restart the SCRIPTS.
2924         */
2925        if (sist & RST) {
2926                printf("%s: SCSI BUS reset detected.\n", sym_name(np));
2927                sym_start_up(shost, 1);
2928                return IRQ_HANDLED;
2929        }
2930
2931        OUTB(np, nc_ctest3, np->rv_ctest3 | CLF);       /* clear dma fifo  */
2932        OUTB(np, nc_stest3, TE|CSF);            /* clear scsi fifo */
2933
2934        if (!(sist  & (GEN|HTH|SGE)) &&
2935            !(dstat & (MDPE|BF|ABRT|IID))) {
2936                if      (sist & SBMC)   sym_int_sbmc(shost);
2937                else if (sist & STO)    sym_int_sto (np);
2938                else if (sist & UDC)    sym_int_udc (np);
2939                else                    goto unknown_int;
2940                return IRQ_HANDLED;
2941        }
2942
2943        /*
2944         *  Now, interrupts we are not able to recover cleanly.
2945         *
2946         *  Log message for hard errors.
2947         *  Reset everything.
2948         */
2949
2950        sym_log_hard_error(shost, sist, dstat);
2951
2952        if ((sist & (GEN|HTH|SGE)) ||
2953                (dstat & (MDPE|BF|ABRT|IID))) {
2954                sym_start_reset(np);
2955                return IRQ_HANDLED;
2956        }
2957
2958unknown_int:
2959        /*
2960         *  We just miss the cause of the interrupt. :(
2961         *  Print a message. The timeout will do the real work.
2962         */
2963        printf( "%s: unknown interrupt(s) ignored, "
2964                "ISTAT=0x%x DSTAT=0x%x SIST=0x%x\n",
2965                sym_name(np), istat, dstat, sist);
2966        return IRQ_NONE;
2967}
2968
2969/*
2970 *  Dequeue from the START queue all CCBs that match 
2971 *  a given target/lun/task condition (-1 means all),
2972 *  and move them from the BUSY queue to the COMP queue 
2973 *  with DID_SOFT_ERROR status condition.
2974 *  This function is used during error handling/recovery.
2975 *  It is called with SCRIPTS not running.
2976 */
2977static int 
2978sym_dequeue_from_squeue(struct sym_hcb *np, int i, int target, int lun, int task)
2979{
2980        int j;
2981        struct sym_ccb *cp;
2982
2983        /*
2984         *  Make sure the starting index is within range.
2985         */
2986        assert((i >= 0) && (i < 2*MAX_QUEUE));
2987
2988        /*
2989         *  Walk until end of START queue and dequeue every job 
2990         *  that matches the target/lun/task condition.
2991         */
2992        j = i;
2993        while (i != np->squeueput) {
2994                cp = sym_ccb_from_dsa(np, scr_to_cpu(np->squeue[i]));
2995                assert(cp);
2996#ifdef SYM_CONF_IARB_SUPPORT
2997                /* Forget hints for IARB, they may be no longer relevant */
2998                cp->host_flags &= ~HF_HINT_IARB;
2999#endif
3000                if ((target == -1 || cp->target == target) &&
3001                    (lun    == -1 || cp->lun    == lun)    &&
3002                    (task   == -1 || cp->tag    == task)) {
3003#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
3004                        sym_set_cam_status(cp->cmd, DID_SOFT_ERROR);
3005#else
3006                        sym_set_cam_status(cp->cmd, DID_REQUEUE);
3007#endif
3008                        sym_remque(&cp->link_ccbq);
3009                        sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
3010                }
3011                else {
3012                        if (i != j)
3013                                np->squeue[j] = np->squeue[i];
3014                        if ((j += 2) >= MAX_QUEUE*2) j = 0;
3015                }
3016                if ((i += 2) >= MAX_QUEUE*2) i = 0;
3017        }
3018        if (i != j)             /* Copy back the idle task if needed */
3019                np->squeue[j] = np->squeue[i];
3020        np->squeueput = j;      /* Update our current start queue pointer */
3021
3022        return (i - j) / 2;
3023}
3024
3025/*
3026 *  chip handler for bad SCSI status condition
3027 *
3028 *  In case of bad SCSI status, we unqueue all the tasks 
3029 *  currently queued to the controller but not yet started 
3030 *  and then restart the SCRIPTS processor immediately.
3031 *
3032 *  QUEUE FULL and BUSY conditions are handled the same way.
3033 *  Basically all the not yet started tasks are requeued in 
3034 *  device queue and the queue is frozen until a completion.
3035 *
3036 *  For CHECK CONDITION and COMMAND TERMINATED status, we use 
3037 *  the CCB of the failed command to prepare a REQUEST SENSE 
3038 *  SCSI command and queue it to the controller queue.
3039 *
3040 *  SCRATCHA is assumed to have been loaded with STARTPOS 
3041 *  before the SCRIPTS called the C code.
3042 */
3043static void sym_sir_bad_scsi_status(struct sym_hcb *np, int num, struct sym_ccb *cp)
3044{
3045        u32             startp;
3046        u_char          s_status = cp->ssss_status;
3047        u_char          h_flags  = cp->host_flags;
3048        int             msglen;
3049        int             i;
3050
3051        /*
3052         *  Compute the index of the next job to start from SCRIPTS.
3053         */
3054        i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
3055
3056        /*
3057         *  The last CCB queued used for IARB hint may be 
3058         *  no longer relevant. Forget it.
3059         */
3060#ifdef SYM_CONF_IARB_SUPPORT
3061        if (np->last_cp)
3062                np->last_cp = 0;
3063#endif
3064
3065        /*
3066         *  Now deal with the SCSI status.
3067         */
3068        switch(s_status) {
3069        case S_BUSY:
3070        case S_QUEUE_FULL:
3071                if (sym_verbose >= 2) {
3072                        sym_print_addr(cp->cmd, "%s\n",
3073                                s_status == S_BUSY ? "BUSY" : "QUEUE FULL\n");
3074                }
3075        default:        /* S_INT, S_INT_COND_MET, S_CONFLICT */
3076                sym_complete_error (np, cp);
3077                break;
3078        case S_TERMINATED:
3079        case S_CHECK_COND:
3080                /*
3081                 *  If we get an SCSI error when requesting sense, give up.
3082                 */
3083                if (h_flags & HF_SENSE) {
3084                        sym_complete_error (np, cp);
3085                        break;
3086                }
3087
3088                /*
3089                 *  Dequeue all queued CCBs for that device not yet started,
3090                 *  and restart the SCRIPTS processor immediately.
3091                 */
3092                sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1);
3093                OUTL_DSP(np, SCRIPTA_BA(np, start));
3094
3095                /*
3096                 *  Save some info of the actual IO.
3097                 *  Compute the data residual.
3098                 */
3099                cp->sv_scsi_status = cp->ssss_status;
3100                cp->sv_xerr_status = cp->xerr_status;
3101                cp->sv_resid = sym_compute_residual(np, cp);
3102
3103                /*
3104                 *  Prepare all needed data structures for 
3105                 *  requesting sense data.
3106                 */
3107
3108                cp->scsi_smsg2[0] = IDENTIFY(0, cp->lun);
3109                msglen = 1;
3110
3111                /*
3112                 *  If we are currently using anything different from 
3113                 *  async. 8 bit data transfers with that target,
3114                 *  start a negotiation, since the device may want 
3115                 *  to report us a UNIT ATTENTION condition due to 
3116                 *  a cause we currently ignore, and we donnot want 
3117                 *  to be stuck with WIDE and/or SYNC data transfer.
3118                 *
3119                 *  cp->nego_status is filled by sym_prepare_nego().
3120                 */
3121                cp->nego_status = 0;
3122                msglen += sym_prepare_nego(np, cp, &cp->scsi_smsg2[msglen]);
3123                /*
3124                 *  Message table indirect structure.
3125                 */
3126                cp->phys.smsg.addr      = CCB_BA(cp, scsi_smsg2);
3127                cp->phys.smsg.size      = cpu_to_scr(msglen);
3128
3129                /*
3130                 *  sense command
3131                 */
3132                cp->phys.cmd.addr       = CCB_BA(cp, sensecmd);
3133                cp->phys.cmd.size       = cpu_to_scr(6);
3134
3135                /*
3136                 *  patch requested size into sense command
3137                 */
3138                cp->sensecmd[0]         = REQUEST_SENSE;
3139                cp->sensecmd[1]         = 0;
3140                if (cp->cmd->device->scsi_level <= SCSI_2 && cp->lun <= 7)
3141                        cp->sensecmd[1] = cp->lun << 5;
3142                cp->sensecmd[4]         = SYM_SNS_BBUF_LEN;
3143                cp->data_len            = SYM_SNS_BBUF_LEN;
3144
3145                /*
3146                 *  sense data
3147                 */
3148                memset(cp->sns_bbuf, 0, SYM_SNS_BBUF_LEN);
3149                cp->phys.sense.addr     = CCB_BA(cp, sns_bbuf);
3150                cp->phys.sense.size     = cpu_to_scr(SYM_SNS_BBUF_LEN);
3151
3152                /*
3153                 *  requeue the command.
3154                 */
3155                startp = SCRIPTB_BA(np, sdata_in);
3156
3157                cp->phys.head.savep     = cpu_to_scr(startp);
3158                cp->phys.head.lastp     = cpu_to_scr(startp);
3159                cp->startp              = cpu_to_scr(startp);
3160                cp->goalp               = cpu_to_scr(startp + 16);
3161
3162                cp->host_xflags = 0;
3163                cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY;
3164                cp->ssss_status = S_ILLEGAL;
3165                cp->host_flags  = (HF_SENSE|HF_DATA_IN);
3166                cp->xerr_status = 0;
3167                cp->extra_bytes = 0;
3168
3169                cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA(np, select));
3170
3171                /*
3172                 *  Requeue the command.
3173                 */
3174                sym_put_start_queue(np, cp);
3175
3176                /*
3177                 *  Give back to upper layer everything we have dequeued.
3178                 */
3179                sym_flush_comp_queue(np, 0);
3180                break;
3181        }
3182}
3183
3184/*
3185 *  After a device has accepted some management message 
3186 *  as BUS DEVICE RESET, ABORT TASK, etc ..., or when 
3187 *  a device signals a UNIT ATTENTION condition, some 
3188 *  tasks are thrown away by the device. We are required 
3189 *  to reflect that on our tasks list since the device 
3190 *  will never complete these tasks.
3191 *
3192 *  This function move from the BUSY queue to the COMP 
3193 *  queue all disconnected CCBs for a given target that 
3194 *  match the following criteria:
3195 *  - lun=-1  means any logical UNIT otherwise a given one.
3196 *  - task=-1 means any task, otherwise a given one.
3197 */
3198int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int task)
3199{
3200        SYM_QUEHEAD qtmp, *qp;
3201        int i = 0;
3202        struct sym_ccb *cp;
3203
3204        /*
3205         *  Move the entire BUSY queue to our temporary queue.
3206         */
3207        sym_que_init(&qtmp);
3208        sym_que_splice(&np->busy_ccbq, &qtmp);
3209        sym_que_init(&np->busy_ccbq);
3210
3211        /*
3212         *  Put all CCBs that matches our criteria into 
3213         *  the COMP queue and put back other ones into 
3214         *  the BUSY queue.
3215         */
3216        while ((qp = sym_remque_head(&qtmp)) != NULL) {
3217                struct scsi_cmnd *cmd;
3218                cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
3219                cmd = cp->cmd;
3220                if (cp->host_status != HS_DISCONNECT ||
3221                    cp->target != target             ||
3222                    (lun  != -1 && cp->lun != lun)   ||
3223                    (task != -1 && 
3224                        (cp->tag != NO_TAG && cp->scsi_smsg[2] != task))) {
3225                        sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
3226                        continue;
3227                }
3228                sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
3229
3230                /* Preserve the software timeout condition */
3231                if (sym_get_cam_status(cmd) != DID_TIME_OUT)
3232                        sym_set_cam_status(cmd, cam_status);
3233                ++i;
3234#if 0
3235printf("XXXX TASK @%p CLEARED\n", cp);
3236#endif
3237        }
3238        return i;
3239}
3240
3241/*
3242 *  chip handler for TASKS recovery
3243 *
3244 *  We cannot safely abort a command, while the SCRIPTS 
3245 *  processor is running, since we just would be in race 
3246 *  with it.
3247 *
3248 *  As long as we have tasks to abort, we keep the SEM 
3249 *  bit set in the ISTAT. When this bit is set, the 
3250 *  SCRIPTS processor interrupts (SIR_SCRIPT_STOPPED) 
3251 *  each time it enters the scheduler.
3252 *
3253 *  If we have to reset a target, clear tasks of a unit,
3254 *  or to perform the abort of a disconnected job, we 
3255 *  restart the SCRIPTS for selecting the target. Once 
3256 *  selected, the SCRIPTS interrupts (SIR_TARGET_SELECTED).
3257 *  If it loses arbitration, the SCRIPTS will interrupt again 
3258 *  the next time it will enter its scheduler, and so on ...
3259 *
3260 *  On SIR_TARGET_SELECTED, we scan for the more 
3261 *  appropriate thing to do:
3262 *
3263 *  - If nothing, we just sent a M_ABORT message to the 
3264 *    target to get rid of the useless SCSI bus ownership.
3265 *    According to the specs, no tasks shall be affected.
3266 *  - If the target is to be reset, we send it a M_RESET 
3267 *    message.
3268 *  - If a logical UNIT is to be cleared , we send the 
3269 *    IDENTIFY(lun) + M_ABORT.
3270 *  - If an untagged task is to be aborted, we send the 
3271 *    IDENTIFY(lun) + M_ABORT.
3272 *  - If a tagged task is to be aborted, we send the 
3273 *    IDENTIFY(lun) + task attributes + M_ABORT_TAG.
3274 *
3275 *  Once our 'kiss of death' :) message has been accepted 
3276 *  by the target, the SCRIPTS interrupts again 
3277 *  (SIR_ABORT_SENT). On this interrupt, we complete 
3278 *  all the CCBs that should have been aborted by the 
3279 *  target according to our message.
3280 */
3281static void sym_sir_task_recovery(struct sym_hcb *np, int num)
3282{
3283        SYM_QUEHEAD *qp;
3284        struct sym_ccb *cp;
3285        struct sym_tcb *tp = NULL; /* gcc isn't quite smart enough yet */
3286        struct scsi_target *starget;
3287        int target=-1, lun=-1, task;
3288        int i, k;
3289
3290        switch(num) {
3291        /*
3292         *  The SCRIPTS processor stopped before starting
3293         *  the next command in order to allow us to perform 
3294         *  some task recovery.
3295         */
3296        case SIR_SCRIPT_STOPPED:
3297                /*
3298                 *  Do we have any target to reset or unit to clear ?
3299                 */
3300                for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
3301                        tp = &np->target[i];
3302                        if (tp->to_reset || 
3303                            (tp->lun0p && tp->lun0p->to_clear)) {
3304                                target = i;
3305                                break;
3306                        }
3307                        if (!tp->lunmp)
3308                                continue;
3309                        for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) {
3310                                if (tp->lunmp[k] && tp->lunmp[k]->to_clear) {
3311                                        target  = i;
3312                                        break;
3313                                }
3314                        }
3315                        if (target != -1)
3316                                break;
3317                }
3318
3319                /*
3320                 *  If not, walk the busy queue for any 
3321                 *  disconnected CCB to be aborted.
3322                 */
3323                if (target == -1) {
3324                        FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
3325                                cp = sym_que_entry(qp,struct sym_ccb,link_ccbq);
3326                                if (cp->host_status != HS_DISCONNECT)
3327                                        continue;
3328                                if (cp->to_abort) {
3329                                        target = cp->target;
3330                                        break;
3331                                }
3332                        }
3333                }
3334
3335                /*
3336                 *  If some target is to be selected, 
3337                 *  prepare and start the selection.
3338                 */
3339                if (target != -1) {
3340                        tp = &np->target[target];
3341                        np->abrt_sel.sel_id     = target;
3342                        np->abrt_sel.sel_scntl3 = tp->head.wval;
3343                        np->abrt_sel.sel_sxfer  = tp->head.sval;
3344                        OUTL(np, nc_dsa, np->hcb_ba);
3345                        OUTL_DSP(np, SCRIPTB_BA(np, sel_for_abort));
3346                        return;
3347                }
3348
3349                /*
3350                 *  Now look for a CCB to abort that haven't started yet.
3351                 *  Btw, the SCRIPTS processor is still stopped, so 
3352                 *  we are not in race.
3353                 */
3354                i = 0;
3355                cp = NULL;
3356                FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
3357                        cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
3358                        if (cp->host_status != HS_BUSY &&
3359                            cp->host_status != HS_NEGOTIATE)
3360                                continue;
3361                        if (!cp->to_abort)
3362                                continue;
3363#ifdef SYM_CONF_IARB_SUPPORT
3364                        /*
3365                         *    If we are using IMMEDIATE ARBITRATION, we donnot 
3366                         *    want to cancel the last queued CCB, since the 
3367                         *    SCRIPTS may have anticipated the selection.
3368                         */
3369                        if (cp == np->last_cp) {
3370                                cp->to_abort = 0;
3371                                continue;
3372                        }
3373#endif
3374                        i = 1;  /* Means we have found some */
3375                        break;
3376                }
3377                if (!i) {
3378                        /*
3379                         *  We are done, so we donnot need 
3380                         *  to synchronize with the SCRIPTS anylonger.
3381                         *  Remove the SEM flag from the ISTAT.
3382                         */
3383                        np->istat_sem = 0;
3384                        OUTB(np, nc_istat, SIGP);
3385                        break;
3386                }
3387                /*
3388                 *  Compute index of next position in the start 
3389                 *  queue the SCRIPTS intends to start and dequeue 
3390                 *  all CCBs for that device that haven't been started.
3391                 */
3392                i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
3393                i = sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1);
3394
3395                /*
3396                 *  Make sure at least our IO to abort has been dequeued.
3397                 */
3398#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
3399                assert(i && sym_get_cam_status(cp->cmd) == DID_SOFT_ERROR);
3400#else
3401                sym_remque(&cp->link_ccbq);
3402                sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
3403#endif
3404                /*
3405                 *  Keep track in cam status of the reason of the abort.
3406                 */
3407                if (cp->to_abort == 2)
3408                        sym_set_cam_status(cp->cmd, DID_TIME_OUT);
3409                else
3410                        sym_set_cam_status(cp->cmd, DID_ABORT);
3411
3412                /*
3413                 *  Complete with error everything that we have dequeued.
3414                 */
3415                sym_flush_comp_queue(np, 0);
3416                break;
3417        /*
3418         *  The SCRIPTS processor has selected a target 
3419         *  we may have some manual recovery to perform for.
3420         */
3421        case SIR_TARGET_SELECTED:
3422                target = INB(np, nc_sdid) & 0xf;
3423                tp = &np->target[target];
3424
3425                np->abrt_tbl.addr = cpu_to_scr(vtobus(np->abrt_msg));
3426
3427                /*
3428                 *  If the target is to be reset, prepare a 
3429                 *  M_RESET message and clear the to_reset flag 
3430                 *  since we donnot expect this operation to fail.
3431                 */
3432                if (tp->to_reset) {
3433                        np->abrt_msg[0] = M_RESET;
3434                        np->abrt_tbl.size = 1;
3435                        tp->to_reset = 0;
3436                        break;
3437                }
3438
3439                /*
3440                 *  Otherwise, look for some logical unit to be cleared.
3441                 */
3442                if (tp->lun0p && tp->lun0p->to_clear)
3443                        lun = 0;
3444                else if (tp->lunmp) {
3445                        for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) {
3446                                if (tp->lunmp[k] && tp->lunmp[k]->to_clear) {
3447                                        lun = k;
3448                                        break;
3449                                }
3450                        }
3451                }
3452
3453                /*
3454                 *  If a logical unit is to be cleared, prepare 
3455                 *  an IDENTIFY(lun) + ABORT MESSAGE.
3456                 */
3457                if (lun != -1) {
3458                        struct sym_lcb *lp = sym_lp(tp, lun);
3459                        lp->to_clear = 0; /* We don't expect to fail here */
3460                        np->abrt_msg[0] = IDENTIFY(0, lun);
3461                        np->abrt_msg[1] = M_ABORT;
3462                        np->abrt_tbl.size = 2;
3463                        break;
3464                }
3465
3466                /*
3467                 *  Otherwise, look for some disconnected job to 
3468                 *  abort for this target.
3469                 */
3470                i = 0;
3471                cp = NULL;
3472                FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
3473                        cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
3474                        if (cp->host_status != HS_DISCONNECT)
3475                                continue;
3476                        if (cp->target != target)
3477                                continue;
3478                        if (!cp->to_abort)
3479                                continue;
3480                        i = 1;  /* Means we have some */
3481                        break;
3482                }
3483
3484                /*
3485                 *  If we have none, probably since the device has 
3486                 *  completed the command before we won abitration,
3487                 *  send a M_ABORT message without IDENTIFY.
3488                 *  According to the specs, the device must just 
3489                 *  disconnect the BUS and not abort any task.
3490                 */
3491                if (!i) {
3492                        np->abrt_msg[0] = M_ABORT;
3493                        np->abrt_tbl.size = 1;
3494                        break;
3495                }
3496
3497                /*
3498                 *  We have some task to abort.
3499                 *  Set the IDENTIFY(lun)
3500                 */
3501                np->abrt_msg[0] = IDENTIFY(0, cp->lun);
3502
3503                /*
3504                 *  If we want to abort an untagged command, we 
3505                 *  will send a IDENTIFY + M_ABORT.
3506                 *  Otherwise (tagged command), we will send 
3507                 *  a IDENTITFY + task attributes + ABORT TAG.
3508                 */
3509                if (cp->tag == NO_TAG) {
3510                        np->abrt_msg[1] = M_ABORT;
3511                        np->abrt_tbl.size = 2;
3512                } else {
3513                        np->abrt_msg[1] = cp->scsi_smsg[1];
3514                        np->abrt_msg[2] = cp->scsi_smsg[2];
3515                        np->abrt_msg[3] = M_ABORT_TAG;
3516                        np->abrt_tbl.size = 4;
3517                }
3518                /*
3519                 *  Keep track of software timeout condition, since the 
3520                 *  peripheral driver may not count retries on abort 
3521                 *  conditions not due to timeout.
3522                 */
3523                if (cp->to_abort == 2)
3524                        sym_set_cam_status(cp->cmd, DID_TIME_OUT);
3525                cp->to_abort = 0; /* We donnot expect to fail here */
3526                break;
3527
3528        /*
3529         *  The target has accepted our message and switched 
3530         *  to BUS FREE phase as we expected.
3531         */
3532        case SIR_ABORT_SENT:
3533                target = INB(np, nc_sdid) & 0xf;
3534                tp = &np->target[target];
3535                starget = tp->starget;
3536                
3537                /*
3538                **  If we didn't abort anything, leave here.
3539                */
3540                if (np->abrt_msg[0] == M_ABORT)
3541                        break;
3542
3543                /*
3544                 *  If we sent a M_RESET, then a hardware reset has 
3545                 *  been performed by the target.
3546                 *  - Reset everything to async 8 bit
3547                 *  - Tell ourself to negotiate next time :-)
3548                 *  - Prepare to clear all disconnected CCBs for 
3549                 *    this target from our task list (lun=task=-1)
3550                 */
3551                lun = -1;
3552                task = -1;
3553                if (np->abrt_msg[0] == M_RESET) {
3554                        tp->head.sval = 0;
3555                        tp->head.wval = np->rv_scntl3;
3556                        tp->head.uval = 0;
3557                        spi_period(starget) = 0;
3558                        spi_offset(starget) = 0;
3559                        spi_width(starget) = 0;
3560                        spi_iu(starget) = 0;
3561                        spi_dt(starget) = 0;
3562                        spi_qas(starget) = 0;
3563                        tp->tgoal.check_nego = 1;
3564                        tp->tgoal.renego = 0;
3565                }
3566
3567                /*
3568                 *  Otherwise, check for the LUN and TASK(s) 
3569                 *  concerned by the cancelation.
3570                 *  If it is not ABORT_TAG then it is CLEAR_QUEUE 
3571                 *  or an ABORT message :-)
3572                 */
3573                else {
3574                        lun = np->abrt_msg[0] & 0x3f;
3575                        if (np->abrt_msg[1] == M_ABORT_TAG)
3576                                task = np->abrt_msg[2];
3577                }
3578
3579                /*
3580                 *  Complete all the CCBs the device should have 
3581                 *  aborted due to our 'kiss of death' message.
3582                 */
3583                i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
3584                sym_dequeue_from_squeue(np, i, target, lun, -1);
3585                sym_clear_tasks(np, DID_ABORT, target, lun, task);
3586                sym_flush_comp_queue(np, 0);
3587
3588                /*
3589                 *  If we sent a BDR, make upper layer aware of that.
3590                 */
3591                if (np->abrt_msg[0] == M_RESET)
3592                        starget_printk(KERN_NOTICE, starget,
3593                                                        "has been reset\n");
3594                break;
3595        }
3596
3597        /*
3598         *  Print to the log the message we intend to send.
3599         */
3600        if (num == SIR_TARGET_SELECTED) {
3601                dev_info(&tp->starget->dev, "control msgout:");
3602                sym_printl_hex(np->abrt_msg, np->abrt_tbl.size);
3603                np->abrt_tbl.size = cpu_to_scr(np->abrt_tbl.size);
3604        }
3605
3606        /*
3607         *  Let the SCRIPTS processor continue.
3608         */
3609        OUTONB_STD();
3610}
3611
3612/*
3613 *  Gerard's alchemy:) that deals with with the data 
3614 *  pointer for both MDP and the residual calculation.
3615 *
3616 *  I didn't want to bloat the code by more than 200 
3617 *  lines for the handling of both MDP and the residual.
3618 *  This has been achieved by using a data pointer 
3619 *  representation consisting in an index in the data 
3620 *  array (dp_sg) and a negative offset (dp_ofs) that 
3621 *  have the following meaning:
3622 *
3623 *  - dp_sg = SYM_CONF_MAX_SG
3624 *    we are at the end of the data script.
3625 *  - dp_sg < SYM_CONF_MAX_SG
3626 *    dp_sg points to the next entry of the scatter array 
3627 *    we want to transfer.
3628 *  - dp_ofs < 0
3629 *    dp_ofs represents the residual of bytes of the 
3630 *    previous entry scatter entry we will send first.
3631 *  - dp_ofs = 0
3632 *    no residual to send first.
3633 *
3634 *  The function sym_evaluate_dp() accepts an arbitray 
3635 *  offset (basically from the MDP message) and returns 
3636 *  the corresponding values of dp_sg and dp_ofs.
3637 */
3638
3639static int sym_evaluate_dp(struct sym_hcb *np, struct sym_ccb *cp, u32 scr, int *ofs)
3640{
3641        u32     dp_scr;
3642        int     dp_ofs, dp_sg, dp_sgmin;
3643        int     tmp;
3644        struct sym_pmc *pm;
3645
3646        /*
3647         *  Compute the resulted data pointer in term of a script 
3648         *  address within some DATA script and a signed byte offset.
3649         */
3650        dp_scr = scr;
3651        dp_ofs = *ofs;
3652        if      (dp_scr == SCRIPTA_BA(np, pm0_data))
3653                pm = &cp->phys.pm0;
3654        else if (dp_scr == SCRIPTA_BA(np, pm1_data))
3655                pm = &cp->phys.pm1;
3656        else
3657                pm = NULL;
3658
3659        if (pm) {
3660                dp_scr  = scr_to_cpu(pm->ret);
3661                dp_ofs -= scr_to_cpu(pm->sg.size) & 0x00ffffff;
3662        }
3663
3664        /*
3665         *  If we are auto-sensing, then we are done.
3666         */
3667        if (cp->host_flags & HF_SENSE) {
3668                *ofs = dp_ofs;
3669                return 0;
3670        }
3671
3672        /*
3673         *  Deduce the index of the sg entry.
3674         *  Keep track of the index of the first valid entry.
3675         *  If result is dp_sg = SYM_CONF_MAX_SG, then we are at the 
3676         *  end of the data.
3677         */
3678        tmp = scr_to_cpu(cp->goalp);
3679        dp_sg = SYM_CONF_MAX_SG;
3680        if (dp_scr != tmp)
3681                dp_sg -= (tmp - 8 - (int)dp_scr) / (2*4);
3682        dp_sgmin = SYM_CONF_MAX_SG - cp->segments;
3683
3684        /*
3685         *  Move to the sg entry the data pointer belongs to.
3686         *
3687         *  If we are inside the data area, we expect result to be:
3688         *
3689         *  Either,
3690         *      dp_ofs = 0 and dp_sg is the index of the sg entry
3691         *      the data pointer belongs to (or the end of the data)
3692         *  Or,
3693         *      dp_ofs < 0 and dp_sg is the index of the sg entry 
3694         *      the data pointer belongs to + 1.
3695         */
3696        if (dp_ofs < 0) {
3697                int n;
3698                while (dp_sg > dp_sgmin) {
3699                        --dp_sg;
3700                        tmp = scr_to_cpu(cp->phys.data[dp_sg].size);
3701                        n = dp_ofs + (tmp & 0xffffff);
3702                        if (n > 0) {
3703                                ++dp_sg;
3704                                break;
3705                        }
3706                        dp_ofs = n;
3707                }
3708        }
3709        else if (dp_ofs > 0) {
3710                while (dp_sg < SYM_CONF_MAX_SG) {
3711                        tmp = scr_to_cpu(cp->phys.data[dp_sg].size);
3712                        dp_ofs -= (tmp & 0xffffff);
3713                        ++dp_sg;
3714                        if (dp_ofs <= 0)
3715                                break;
3716                }
3717        }
3718
3719        /*
3720         *  Make sure the data pointer is inside the data area.
3721         *  If not, return some error.
3722         */
3723        if      (dp_sg < dp_sgmin || (dp_sg == dp_sgmin && dp_ofs < 0))
3724                goto out_err;
3725        else if (dp_sg > SYM_CONF_MAX_SG ||
3726                 (dp_sg == SYM_CONF_MAX_SG && dp_ofs > 0))
3727                goto out_err;
3728
3729        /*
3730         *  Save the extreme pointer if needed.
3731         */
3732        if (dp_sg > cp->ext_sg ||
3733            (dp_sg == cp->ext_sg && dp_ofs > cp->ext_ofs)) {
3734                cp->ext_sg  = dp_sg;
3735                cp->ext_ofs = dp_ofs;
3736        }
3737
3738        /*
3739         *  Return data.
3740         */
3741        *ofs = dp_ofs;
3742        return dp_sg;
3743
3744out_err:
3745        return -1;
3746}
3747
3748/*
3749 *  chip handler for MODIFY DATA POINTER MESSAGE
3750 *
3751 *  We also call this function on IGNORE WIDE RESIDUE 
3752 *  messages that do not match a SWIDE full condition.
3753 *  Btw, we assume in that situation that such a message 
3754 *  is equivalent to a MODIFY DATA POINTER (offset=-1).
3755 */
3756
3757static void sym_modify_dp(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp, int ofs)
3758{
3759        int dp_ofs      = ofs;
3760        u32     dp_scr  = sym_get_script_dp (np, cp);
3761        u32     dp_ret;
3762        u32     tmp;
3763        u_char  hflags;
3764        int     dp_sg;
3765        struct  sym_pmc *pm;
3766
3767        /*
3768         *  Not supported for auto-sense.
3769         */
3770        if (cp->host_flags & HF_SENSE)
3771                goto out_reject;
3772
3773        /*
3774         *  Apply our alchemy:) (see comments in sym_evaluate_dp()), 
3775         *  to the resulted data pointer.
3776         */
3777        dp_sg = sym_evaluate_dp(np, cp, dp_scr, &dp_ofs);
3778        if (dp_sg < 0)
3779                goto out_reject;
3780
3781        /*
3782         *  And our alchemy:) allows to easily calculate the data 
3783         *  script address we want to return for the next data phase.
3784         */
3785        dp_ret = cpu_to_scr(cp->goalp);
3786        dp_ret = dp_ret - 8 - (SYM_CONF_MAX_SG - dp_sg) * (2*4);
3787
3788        /*
3789         *  If offset / scatter entry is zero we donnot need 
3790         *  a context for the new current data pointer.
3791         */
3792        if (dp_ofs == 0) {
3793                dp_scr = dp_ret;
3794                goto out_ok;
3795        }
3796
3797        /*
3798         *  Get a context for the new current data pointer.
3799         */
3800        hflags = INB(np, HF_PRT);
3801
3802        if (hflags & HF_DP_SAVED)
3803                hflags ^= HF_ACT_PM;
3804
3805        if (!(hflags & HF_ACT_PM)) {
3806                pm  = &cp->phys.pm0;
3807                dp_scr = SCRIPTA_BA(np, pm0_data);
3808        }
3809        else {
3810                pm = &cp->phys.pm1;
3811                dp_scr = SCRIPTA_BA(np, pm1_data);
3812        }
3813
3814        hflags &= ~(HF_DP_SAVED);
3815
3816        OUTB(np, HF_PRT, hflags);
3817
3818        /*
3819         *  Set up the new current data pointer.
3820         *  ofs < 0 there, and for the next data phase, we 
3821         *  want to transfer part of the data of the sg entry 
3822         *  corresponding to index dp_sg-1 prior to returning 
3823         *  to the main data script.
3824         */
3825        pm->ret = cpu_to_scr(dp_ret);
3826        tmp  = scr_to_cpu(cp->phys.data[dp_sg-1].addr);
3827        tmp += scr_to_cpu(cp->phys.data[dp_sg-1].size) + dp_ofs;
3828        pm->sg.addr = cpu_to_scr(tmp);
3829        pm->sg.size = cpu_to_scr(-dp_ofs);
3830
3831out_ok:
3832        sym_set_script_dp (np, cp, dp_scr);
3833        OUTL_DSP(np, SCRIPTA_BA(np, clrack));
3834        return;
3835
3836out_reject:
3837        OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
3838}
3839
3840
3841/*
3842 *  chip calculation of the data residual.
3843 *
3844 *  As I used to say, the requirement of data residual 
3845 *  in SCSI is broken, useless and cannot be achieved 
3846 *  without huge complexity.
3847 *  But most OSes and even the official CAM require it.
3848 *  When stupidity happens to be so widely spread inside 
3849 *  a community, it gets hard to convince.
3850 *
3851 *  Anyway, I don't care, since I am not going to use 
3852 *  any software that considers this data residual as 
3853 *  a relevant information. :)
3854 */
3855
3856int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp)
3857{
3858        int dp_sg, dp_sgmin, resid = 0;
3859        int dp_ofs = 0;
3860
3861        /*
3862         *  Check for some data lost or just thrown away.
3863         *  We are not required to be quite accurate in this 
3864         *  situation. Btw, if we are odd for output and the 
3865         *  device claims some more data, it may well happen 
3866         *  than our residual be zero. :-)
3867         */
3868        if (cp->xerr_status & (XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN)) {
3869                if (cp->xerr_status & XE_EXTRA_DATA)
3870                        resid -= cp->extra_bytes;
3871                if (cp->xerr_status & XE_SODL_UNRUN)
3872                        ++resid;
3873                if (cp->xerr_status & XE_SWIDE_OVRUN)
3874                        --resid;
3875        }
3876
3877        /*
3878         *  If all data has been transferred,
3879         *  there is no residual.
3880         */
3881        if (cp->phys.head.lastp == cp->goalp)
3882                return resid;
3883
3884        /*
3885         *  If no data transfer occurs, or if the data
3886         *  pointer is weird, return full residual.
3887         */
3888        if (cp->startp == cp->phys.head.lastp ||
3889            sym_evaluate_dp(np, cp, scr_to_cpu(cp->phys.head.lastp),
3890                            &dp_ofs) < 0) {
3891                return cp->data_len - cp->odd_byte_adjustment;
3892        }
3893
3894        /*
3895         *  If we were auto-sensing, then we are done.
3896         */
3897        if (cp->host_flags & HF_SENSE) {
3898                return -dp_ofs;
3899        }
3900
3901        /*
3902         *  We are now full comfortable in the computation 
3903         *  of the data residual (2's complement).
3904         */
3905        dp_sgmin = SYM_CONF_MAX_SG - cp->segments;
3906        resid = -cp->ext_ofs;
3907        for (dp_sg = cp->ext_sg; dp_sg < SYM_CONF_MAX_SG; ++dp_sg) {
3908                u_int tmp = scr_to_cpu(cp->phys.data[dp_sg].size);
3909                resid += (tmp & 0xffffff);
3910        }
3911
3912        resid -= cp->odd_byte_adjustment;
3913
3914        /*
3915         *  Hopefully, the result is not too wrong.
3916         */
3917        return resid;
3918}
3919
3920/*
3921 *  Negotiation for WIDE and SYNCHRONOUS DATA TRANSFER.
3922 *
3923 *  When we try to negotiate, we append the negotiation message
3924 *  to the identify and (maybe) simple tag message.
3925 *  The host status field is set to HS_NEGOTIATE to mark this
3926 *  situation.
3927 *
3928 *  If the target doesn't answer this message immediately
3929 *  (as required by the standard), the SIR_NEGO_FAILED interrupt
3930 *  will be raised eventually.
3931 *  The handler removes the HS_NEGOTIATE status, and sets the
3932 *  negotiated value to the default (async / nowide).
3933 *
3934 *  If we receive a matching answer immediately, we check it
3935 *  for validity, and set the values.
3936 *
3937 *  If we receive a Reject message immediately, we assume the
3938 *  negotiation has failed, and fall back to standard values.
3939 *
3940 *  If we receive a negotiation message while not in HS_NEGOTIATE
3941 *  state, it's a target initiated negotiation. We prepare a
3942 *  (hopefully) valid answer, set our parameters, and send back 
3943 *  this answer to the target.
3944 *
3945 *  If the target doesn't fetch the answer (no message out phase),
3946 *  we assume the negotiation has failed, and fall back to default
3947 *  settings (SIR_NEGO_PROTO interrupt).
3948 *
3949 *  When we set the values, we adjust them in all ccbs belonging 
3950 *  to this target, in the controller's register, and in the "phys"
3951 *  field of the controller's struct sym_hcb.
3952 */
3953
3954/*
3955 *  chip handler for SYNCHRONOUS DATA TRANSFER REQUEST (SDTR) message.
3956 */
3957static int  
3958sym_sync_nego_check(struct sym_hcb *np, int req, struct sym_ccb *cp)
3959{
3960        int target = cp->target;
3961        u_char  chg, ofs, per, fak, div;
3962
3963        if (DEBUG_FLAGS & DEBUG_NEGO) {
3964                sym_print_nego_msg(np, target, "sync msgin", np->msgin);
3965        }
3966
3967        /*
3968         *  Get requested values.
3969         */
3970        chg = 0;
3971        per = np->msgin[3];
3972        ofs = np->msgin[4];
3973
3974        /*
3975         *  Check values against our limits.
3976         */
3977        if (ofs) {
3978                if (ofs > np->maxoffs)
3979                        {chg = 1; ofs = np->maxoffs;}
3980        }
3981
3982        if (ofs) {
3983                if (per < np->minsync)
3984                        {chg = 1; per = np->minsync;}
3985        }
3986
3987        /*
3988         *  Get new chip synchronous parameters value.
3989         */
3990        div = fak = 0;
3991        if (ofs && sym_getsync(np, 0, per, &div, &fak) < 0)
3992                goto reject_it;
3993
3994        if (DEBUG_FLAGS & DEBUG_NEGO) {
3995                sym_print_addr(cp->cmd,
3996                                "sdtr: ofs=%d per=%d div=%d fak=%d chg=%d.\n",
3997                                ofs, per, div, fak, chg);
3998        }
3999
4000        /*
4001         *  If it was an answer we want to change, 
4002         *  then it isn't acceptable. Reject it.
4003         */
4004        if (!req && chg)
4005                goto reject_it;
4006
4007        /*
4008         *  Apply new values.
4009         */
4010        sym_setsync (np, target, ofs, per, div, fak);
4011
4012        /*
4013         *  It was an answer. We are done.
4014         */
4015        if (!req)
4016                return 0;
4017
4018        /*
4019         *  It was a request. Prepare an answer message.
4020         */
4021        spi_populate_sync_msg(np->msgout, per, ofs);
4022
4023        if (DEBUG_FLAGS & DEBUG_NEGO) {
4024                sym_print_nego_msg(np, target, "sync msgout", np->msgout);
4025        }
4026
4027        np->msgin [0] = M_NOOP;
4028
4029        return 0;
4030
4031reject_it:
4032        sym_setsync (np, target, 0, 0, 0, 0);
4033        return -1;
4034}
4035
4036static void sym_sync_nego(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4037{
4038        int req = 1;
4039        int result;
4040
4041        /*
4042         *  Request or answer ?
4043         */
4044        if (INB(np, HS_PRT) == HS_NEGOTIATE) {
4045                OUTB(np, HS_PRT, HS_BUSY);
4046                if (cp->nego_status && cp->nego_status != NS_SYNC)
4047                        goto reject_it;
4048                req = 0;
4049        }
4050
4051        /*
4052         *  Check and apply new values.
4053         */
4054        result = sym_sync_nego_check(np, req, cp);
4055        if (result)     /* Not acceptable, reject it */
4056                goto reject_it;
4057        if (req) {      /* Was a request, send response. */
4058                cp->nego_status = NS_SYNC;
4059                OUTL_DSP(np, SCRIPTB_BA(np, sdtr_resp));
4060        }
4061        else            /* Was a response, we are done. */
4062                OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4063        return;
4064
4065reject_it:
4066        OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4067}
4068
4069/*
4070 *  chip handler for PARALLEL PROTOCOL REQUEST (PPR) message.
4071 */
4072static int 
4073sym_ppr_nego_check(struct sym_hcb *np, int req, int target)
4074{
4075        struct sym_tcb *tp = &np->target[target];
4076        unsigned char fak, div;
4077        int dt, chg = 0;
4078
4079        unsigned char per = np->msgin[3];
4080        unsigned char ofs = np->msgin[5];
4081        unsigned char wide = np->msgin[6];
4082        unsigned char opts = np->msgin[7] & PPR_OPT_MASK;
4083
4084        if (DEBUG_FLAGS & DEBUG_NEGO) {
4085                sym_print_nego_msg(np, target, "ppr msgin", np->msgin);
4086        }
4087
4088        /*
4089         *  Check values against our limits.
4090         */
4091        if (wide > np->maxwide) {
4092                chg = 1;
4093                wide = np->maxwide;
4094        }
4095        if (!wide || !(np->features & FE_U3EN))
4096                opts = 0;
4097
4098        if (opts != (np->msgin[7] & PPR_OPT_MASK))
4099                chg = 1;
4100
4101        dt = opts & PPR_OPT_DT;
4102
4103        if (ofs) {
4104                unsigned char maxoffs = dt ? np->maxoffs_dt : np->maxoffs;
4105                if (ofs > maxoffs) {
4106                        chg = 1;
4107                        ofs = maxoffs;
4108                }
4109        }
4110
4111        if (ofs) {
4112                unsigned char minsync = dt ? np->minsync_dt : np->minsync;
4113                if (per < minsync) {
4114                        chg = 1;
4115                        per = minsync;
4116                }
4117        }
4118
4119        /*
4120         *  Get new chip synchronous parameters value.
4121         */
4122        div = fak = 0;
4123        if (ofs && sym_getsync(np, dt, per, &div, &fak) < 0)
4124                goto reject_it;
4125
4126        /*
4127         *  If it was an answer we want to change, 
4128         *  then it isn't acceptable. Reject it.
4129         */
4130        if (!req && chg)
4131                goto reject_it;
4132
4133        /*
4134         *  Apply new values.
4135         */
4136        sym_setpprot(np, target, opts, ofs, per, wide, div, fak);
4137
4138        /*
4139         *  It was an answer. We are done.
4140         */
4141        if (!req)
4142                return 0;
4143
4144        /*
4145         *  It was a request. Prepare an answer message.
4146         */
4147        spi_populate_ppr_msg(np->msgout, per, ofs, wide, opts);
4148
4149        if (DEBUG_FLAGS & DEBUG_NEGO) {
4150                sym_print_nego_msg(np, target, "ppr msgout", np->msgout);
4151        }
4152
4153        np->msgin [0] = M_NOOP;
4154
4155        return 0;
4156
4157reject_it:
4158        sym_setpprot (np, target, 0, 0, 0, 0, 0, 0);
4159        /*
4160         *  If it is a device response that should result in  
4161         *  ST, we may want to try a legacy negotiation later.
4162         */
4163        if (!req && !opts) {
4164                tp->tgoal.period = per;
4165                tp->tgoal.offset = ofs;
4166                tp->tgoal.width = wide;
4167                tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
4168                tp->tgoal.check_nego = 1;
4169        }
4170        return -1;
4171}
4172
4173static void sym_ppr_nego(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4174{
4175        int req = 1;
4176        int result;
4177
4178        /*
4179         *  Request or answer ?
4180         */
4181        if (INB(np, HS_PRT) == HS_NEGOTIATE) {
4182                OUTB(np, HS_PRT, HS_BUSY);
4183                if (cp->nego_status && cp->nego_status != NS_PPR)
4184                        goto reject_it;
4185                req = 0;
4186        }
4187
4188        /*
4189         *  Check and apply new values.
4190         */
4191        result = sym_ppr_nego_check(np, req, cp->target);
4192        if (result)     /* Not acceptable, reject it */
4193                goto reject_it;
4194        if (req) {      /* Was a request, send response. */
4195                cp->nego_status = NS_PPR;
4196                OUTL_DSP(np, SCRIPTB_BA(np, ppr_resp));
4197        }
4198        else            /* Was a response, we are done. */
4199                OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4200        return;
4201
4202reject_it:
4203        OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4204}
4205
4206/*
4207 *  chip handler for WIDE DATA TRANSFER REQUEST (WDTR) message.
4208 */
4209static int  
4210sym_wide_nego_check(struct sym_hcb *np, int req, struct sym_ccb *cp)
4211{
4212        int target = cp->target;
4213        u_char  chg, wide;
4214
4215        if (DEBUG_FLAGS & DEBUG_NEGO) {
4216                sym_print_nego_msg(np, target, "wide msgin", np->msgin);
4217        }
4218
4219        /*
4220         *  Get requested values.
4221         */
4222        chg  = 0;
4223        wide = np->msgin[3];
4224
4225        /*
4226         *  Check values against our limits.
4227         */
4228        if (wide > np->maxwide) {
4229                chg = 1;
4230                wide = np->maxwide;
4231        }
4232
4233        if (DEBUG_FLAGS & DEBUG_NEGO) {
4234                sym_print_addr(cp->cmd, "wdtr: wide=%d chg=%d.\n",
4235                                wide, chg);
4236        }
4237
4238        /*
4239         *  If it was an answer we want to change, 
4240         *  then it isn't acceptable. Reject it.
4241         */
4242        if (!req && chg)
4243                goto reject_it;
4244
4245        /*
4246         *  Apply new values.
4247         */
4248        sym_setwide (np, target, wide);
4249
4250        /*
4251         *  It was an answer. We are done.
4252         */
4253        if (!req)
4254                return 0;
4255
4256        /*
4257         *  It was a request. Prepare an answer message.
4258         */
4259        spi_populate_width_msg(np->msgout, wide);
4260
4261        np->msgin [0] = M_NOOP;
4262
4263        if (DEBUG_FLAGS & DEBUG_NEGO) {
4264                sym_print_nego_msg(np, target, "wide msgout", np->msgout);
4265        }
4266
4267        return 0;
4268
4269reject_it:
4270        return -1;
4271}
4272
4273static void sym_wide_nego(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4274{
4275        int req = 1;
4276        int result;
4277
4278        /*
4279         *  Request or answer ?
4280         */
4281        if (INB(np, HS_PRT) == HS_NEGOTIATE) {
4282                OUTB(np, HS_PRT, HS_BUSY);
4283                if (cp->nego_status && cp->nego_status != NS_WIDE)
4284                        goto reject_it;
4285                req = 0;
4286        }
4287
4288        /*
4289         *  Check and apply new values.
4290         */
4291        result = sym_wide_nego_check(np, req, cp);
4292        if (result)     /* Not acceptable, reject it */
4293                goto reject_it;
4294        if (req) {      /* Was a request, send response. */
4295                cp->nego_status = NS_WIDE;
4296                OUTL_DSP(np, SCRIPTB_BA(np, wdtr_resp));
4297        } else {                /* Was a response. */
4298                /*
4299                 * Negotiate for SYNC immediately after WIDE response.
4300                 * This allows to negotiate for both WIDE and SYNC on 
4301                 * a single SCSI command (Suggested by Justin Gibbs).
4302                 */
4303                if (tp->tgoal.offset) {
4304                        spi_populate_sync_msg(np->msgout, tp->tgoal.period,
4305                                        tp->tgoal.offset);
4306
4307                        if (DEBUG_FLAGS & DEBUG_NEGO) {
4308                                sym_print_nego_msg(np, cp->target,
4309                                                   "sync msgout", np->msgout);
4310                        }
4311
4312                        cp->nego_status = NS_SYNC;
4313                        OUTB(np, HS_PRT, HS_NEGOTIATE);
4314                        OUTL_DSP(np, SCRIPTB_BA(np, sdtr_resp));
4315                        return;
4316                } else
4317                        OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4318        }
4319
4320        return;
4321
4322reject_it:
4323        OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4324}
4325
4326/*
4327 *  Reset DT, SYNC or WIDE to default settings.
4328 *
4329 *  Called when a negotiation does not succeed either 
4330 *  on rejection or on protocol error.
4331 *
4332 *  A target that understands a PPR message should never 
4333 *  reject it, and messing with it is very unlikely.
4334 *  So, if a PPR makes problems, we may just want to 
4335 *  try a legacy negotiation later.
4336 */
4337static void sym_nego_default(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4338{
4339        switch (cp->nego_status) {
4340        case NS_PPR:
4341#if 0
4342                sym_setpprot (np, cp->target, 0, 0, 0, 0, 0, 0);
4343#else
4344                if (tp->tgoal.period < np->minsync)
4345                        tp->tgoal.period = np->minsync;
4346                if (tp->tgoal.offset > np->maxoffs)
4347                        tp->tgoal.offset = np->maxoffs;
4348                tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
4349                tp->tgoal.check_nego = 1;
4350#endif
4351                break;
4352        case NS_SYNC:
4353                sym_setsync (np, cp->target, 0, 0, 0, 0);
4354                break;
4355        case NS_WIDE:
4356                sym_setwide (np, cp->target, 0);
4357                break;
4358        }
4359        np->msgin [0] = M_NOOP;
4360        np->msgout[0] = M_NOOP;
4361        cp->nego_status = 0;
4362}
4363
4364/*
4365 *  chip handler for MESSAGE REJECT received in response to 
4366 *  PPR, WIDE or SYNCHRONOUS negotiation.
4367 */
4368static void sym_nego_rejected(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4369{
4370        sym_nego_default(np, tp, cp);
4371        OUTB(np, HS_PRT, HS_BUSY);
4372}
4373
4374/*
4375 *  chip exception handler for programmed interrupts.
4376 */
4377static void sym_int_sir(struct sym_hcb *np)
4378{
4379        u_char  num     = INB(np, nc_dsps);
4380        u32     dsa     = INL(np, nc_dsa);
4381        struct sym_ccb *cp      = sym_ccb_from_dsa(np, dsa);
4382        u_char  target  = INB(np, nc_sdid) & 0x0f;
4383        struct sym_tcb *tp      = &np->target[target];
4384        int     tmp;
4385
4386        if (DEBUG_FLAGS & DEBUG_TINY) printf ("I#%d", num);
4387
4388        switch (num) {
4389#if   SYM_CONF_DMA_ADDRESSING_MODE == 2
4390        /*
4391         *  SCRIPTS tell us that we may have to update 
4392         *  64 bit DMA segment registers.
4393         */
4394        case SIR_DMAP_DIRTY:
4395                sym_update_dmap_regs(np);
4396                goto out;
4397#endif
4398        /*
4399         *  Command has been completed with error condition 
4400         *  or has been auto-sensed.
4401         */
4402        case SIR_COMPLETE_ERROR:
4403                sym_complete_error(np, cp);
4404                return;
4405        /*
4406         *  The C code is currently trying to recover from something.
4407         *  Typically, user want to abort some command.
4408         */
4409        case SIR_SCRIPT_STOPPED:
4410        case SIR_TARGET_SELECTED:
4411        case SIR_ABORT_SENT:
4412                sym_sir_task_recovery(np, num);
4413                return;
4414        /*
4415         *  The device didn't go to MSG OUT phase after having 
4416         *  been selected with ATN.  We do not want to handle that.
4417         */
4418        case SIR_SEL_ATN_NO_MSG_OUT:
4419                scmd_printk(KERN_WARNING, cp->cmd,
4420                                "No MSG OUT phase after selection with ATN\n");
4421                goto out_stuck;
4422        /*
4423         *  The device didn't switch to MSG IN phase after 
4424         *  having reselected the initiator.
4425         */
4426        case SIR_RESEL_NO_MSG_IN:
4427                scmd_printk(KERN_WARNING, cp->cmd,
4428                                "No MSG IN phase after reselection\n");
4429                goto out_stuck;
4430        /*
4431         *  After reselection, the device sent a message that wasn't 
4432         *  an IDENTIFY.
4433         */
4434        case SIR_RESEL_NO_IDENTIFY:
4435                scmd_printk(KERN_WARNING, cp->cmd,
4436                                "No IDENTIFY after reselection\n");
4437                goto out_stuck;
4438        /*
4439         *  The device reselected a LUN we do not know about.
4440         */
4441        case SIR_RESEL_BAD_LUN:
4442                np->msgout[0] = M_RESET;
4443                goto out;
4444        /*
4445         *  The device reselected for an untagged nexus and we 
4446         *  haven't any.
4447         */
4448        case SIR_RESEL_BAD_I_T_L:
4449                np->msgout[0] = M_ABORT;
4450                goto out;
4451        /*
4452         * The device reselected for a tagged nexus that we do not have.
4453         */
4454        case SIR_RESEL_BAD_I_T_L_Q:
4455                np->msgout[0] = M_ABORT_TAG;
4456                goto out;
4457        /*
4458         *  The SCRIPTS let us know that the device has grabbed 
4459         *  our message and will abort the job.
4460         */
4461        case SIR_RESEL_ABORTED:
4462                np->lastmsg = np->msgout[0];
4463                np->msgout[0] = M_NOOP;
4464                scmd_printk(KERN_WARNING, cp->cmd,
4465                        "message %x sent on bad reselection\n", np->lastmsg);
4466                goto out;
4467        /*
4468         *  The SCRIPTS let us know that a message has been 
4469         *  successfully sent to the device.
4470         */
4471        case SIR_MSG_OUT_DONE:
4472                np->lastmsg = np->msgout[0];
4473                np->msgout[0] = M_NOOP;
4474                /* Should we really care of that */
4475                if (np->lastmsg == M_PARITY || np->lastmsg == M_ID_ERROR) {
4476                        if (cp) {
4477                                cp->xerr_status &= ~XE_PARITY_ERR;
4478                                if (!cp->xerr_status)
4479                                        OUTOFFB(np, HF_PRT, HF_EXT_ERR);
4480                        }
4481                }
4482                goto out;
4483        /*
4484         *  The device didn't send a GOOD SCSI status.
4485         *  We may have some work to do prior to allow 
4486         *  the SCRIPTS processor to continue.
4487         */
4488        case SIR_BAD_SCSI_STATUS:
4489                if (!cp)
4490                        goto out;
4491                sym_sir_bad_scsi_status(np, num, cp);
4492                return;
4493        /*
4494         *  We are asked by the SCRIPTS to prepare a 
4495         *  REJECT message.
4496         */
4497        case SIR_REJECT_TO_SEND:
4498                sym_print_msg(cp, "M_REJECT to send for ", np->msgin);
4499                np->msgout[0] = M_REJECT;
4500                goto out;
4501        /*
4502         *  We have been ODD at the end of a DATA IN 
4503         *  transfer and the device didn't send a 
4504         *  IGNORE WIDE RESIDUE message.
4505         *  It is a data overrun condition.
4506         */
4507        case SIR_SWIDE_OVERRUN:
4508                if (cp) {
4509                        OUTONB(np, HF_PRT, HF_EXT_ERR);
4510                        cp->xerr_status |= XE_SWIDE_OVRUN;
4511                }
4512                goto out;
4513        /*
4514         *  We have been ODD at the end of a DATA OUT 
4515         *  transfer.
4516         *  It is a data underrun condition.
4517         */
4518        case SIR_SODL_UNDERRUN:
4519                if (cp) {
4520                        OUTONB(np, HF_PRT, HF_EXT_ERR);
4521                        cp->xerr_status |= XE_SODL_UNRUN;
4522                }
4523                goto out;
4524        /*
4525         *  The device wants us to tranfer more data than 
4526         *  expected or in the wrong direction.
4527         *  The number of extra bytes is in scratcha.
4528         *  It is a data overrun condition.
4529         */
4530        case SIR_DATA_OVERRUN:
4531                if (cp) {
4532                        OUTONB(np, HF_PRT, HF_EXT_ERR);
4533                        cp->xerr_status |= XE_EXTRA_DATA;
4534                        cp->extra_bytes += INL(np, nc_scratcha);
4535                }
4536                goto out;
4537        /*
4538         *  The device switched to an illegal phase (4/5).
4539         */
4540        case SIR_BAD_PHASE:
4541                if (cp) {
4542                        OUTONB(np, HF_PRT, HF_EXT_ERR);
4543                        cp->xerr_status |= XE_BAD_PHASE;
4544                }
4545                goto out;
4546        /*
4547         *  We received a message.
4548         */
4549        case SIR_MSG_RECEIVED:
4550                if (!cp)
4551                        goto out_stuck;
4552                switch (np->msgin [0]) {
4553                /*
4554                 *  We received an extended message.
4555                 *  We handle MODIFY DATA POINTER, SDTR, WDTR 
4556                 *  and reject all other extended messages.
4557                 */
4558                case M_EXTENDED:
4559                        switch (np->msgin [2]) {
4560                        case M_X_MODIFY_DP:
4561                                if (DEBUG_FLAGS & DEBUG_POINTER)
4562                                        sym_print_msg(cp, "extended msg ",
4563                                                      np->msgin);
4564                                tmp = (np->msgin[3]<<24) + (np->msgin[4]<<16) + 
4565                                      (np->msgin[5]<<8)  + (np->msgin[6]);
4566                                sym_modify_dp(np, tp, cp, tmp);
4567                                return;
4568                        case M_X_SYNC_REQ:
4569                                sym_sync_nego(np, tp, cp);
4570                                return;
4571                        case M_X_PPR_REQ:
4572                                sym_ppr_nego(np, tp, cp);
4573                                return;
4574                        case M_X_WIDE_REQ:
4575                                sym_wide_nego(np, tp, cp);
4576                                return;
4577                        default:
4578                                goto out_reject;
4579                        }
4580                        break;
4581                /*
4582                 *  We received a 1/2 byte message not handled from SCRIPTS.
4583                 *  We are only expecting MESSAGE REJECT and IGNORE WIDE 
4584                 *  RESIDUE messages that haven't been anticipated by 
4585                 *  SCRIPTS on SWIDE full condition. Unanticipated IGNORE 
4586                 *  WIDE RESIDUE messages are aliased as MODIFY DP (-1).
4587                 */
4588                case M_IGN_RESIDUE:
4589                        if (DEBUG_FLAGS & DEBUG_POINTER)
4590                                sym_print_msg(cp, "1 or 2 byte ", np->msgin);
4591                        if (cp->host_flags & HF_SENSE)
4592                                OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4593                        else
4594                                sym_modify_dp(np, tp, cp, -1);
4595                        return;
4596                case M_REJECT:
4597                        if (INB(np, HS_PRT) == HS_NEGOTIATE)
4598                                sym_nego_rejected(np, tp, cp);
4599                        else {
4600                                sym_print_addr(cp->cmd,
4601                                        "M_REJECT received (%x:%x).\n",
4602                                        scr_to_cpu(np->lastmsg), np->msgout[0]);
4603                        }
4604                        goto out_clrack;
4605                        break;
4606                default:
4607                        goto out_reject;
4608                }
4609                break;
4610        /*
4611         *  We received an unknown message.
4612         *  Ignore all MSG IN phases and reject it.
4613         */
4614        case SIR_MSG_WEIRD:
4615                sym_print_msg(cp, "WEIRD message received", np->msgin);
4616                OUTL_DSP(np, SCRIPTB_BA(np, msg_weird));
4617                return;
4618        /*
4619         *  Negotiation failed.
4620         *  Target does not send us the reply.
4621         *  Remove the HS_NEGOTIATE status.
4622         */
4623        case SIR_NEGO_FAILED:
4624                OUTB(np, HS_PRT, HS_BUSY);
4625        /*
4626         *  Negotiation failed.
4627         *  Target does not want answer message.
4628         */
4629        case SIR_NEGO_PROTO:
4630                sym_nego_default(np, tp, cp);
4631                goto out;
4632        }
4633
4634out:
4635        OUTONB_STD();
4636        return;
4637out_reject:
4638        OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4639        return;
4640out_clrack:
4641        OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4642        return;
4643out_stuck:
4644        return;
4645}
4646
4647/*
4648 *  Acquire a control block
4649 */
4650struct sym_ccb *sym_get_ccb (struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order)
4651{
4652        u_char tn = cmd->device->id;
4653        u_char ln = cmd->device->lun;
4654        struct sym_tcb *tp = &np->target[tn];
4655        struct sym_lcb *lp = sym_lp(tp, ln);
4656        u_short tag = NO_TAG;
4657        SYM_QUEHEAD *qp;
4658        struct sym_ccb *cp = NULL;
4659
4660        /*
4661         *  Look for a free CCB
4662         */
4663        if (sym_que_empty(&np->free_ccbq))
4664                sym_alloc_ccb(np);
4665        qp = sym_remque_head(&np->free_ccbq);
4666        if (!qp)
4667                goto out;
4668        cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
4669
4670        {
4671                /*
4672                 *  If we have been asked for a tagged command.
4673                 */
4674                if (tag_order) {
4675                        /*
4676                         *  Debugging purpose.
4677                         */
4678#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4679                        if (lp->busy_itl != 0)
4680                                goto out_free;
4681#endif
4682                        /*
4683                         *  Allocate resources for tags if not yet.
4684                         */
4685                        if (!lp->cb_tags) {
4686                                sym_alloc_lcb_tags(np, tn, ln);
4687                                if (!lp->cb_tags)
4688                                        goto out_free;
4689                        }
4690                        /*
4691                         *  Get a tag for this SCSI IO and set up
4692                         *  the CCB bus address for reselection, 
4693                         *  and count it for this LUN.
4694                         *  Toggle reselect path to tagged.
4695                         */
4696                        if (lp->busy_itlq < SYM_CONF_MAX_TASK) {
4697                                tag = lp->cb_tags[lp->ia_tag];
4698                                if (++lp->ia_tag == SYM_CONF_MAX_TASK)
4699                                        lp->ia_tag = 0;
4700                                ++lp->busy_itlq;
4701#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4702                                lp->itlq_tbl[tag] = cpu_to_scr(cp->ccb_ba);
4703                                lp->head.resel_sa =
4704                                        cpu_to_scr(SCRIPTA_BA(np, resel_tag));
4705#endif
4706#ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
4707                                cp->tags_si = lp->tags_si;
4708                                ++lp->tags_sum[cp->tags_si];
4709                                ++lp->tags_since;
4710#endif
4711                        }
4712                        else
4713                                goto out_free;
4714                }
4715                /*
4716                 *  This command will not be tagged.
4717                 *  If we already have either a tagged or untagged 
4718                 *  one, refuse to overlap this untagged one.
4719                 */
4720                else {
4721                        /*
4722                         *  Debugging purpose.
4723                         */
4724#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4725                        if (lp->busy_itl != 0 || lp->busy_itlq != 0)
4726                                goto out_free;
4727#endif
4728                        /*
4729                         *  Count this nexus for this LUN.
4730                         *  Set up the CCB bus address for reselection.
4731                         *  Toggle reselect path to untagged.
4732                         */
4733                        ++lp->busy_itl;
4734#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4735                        if (lp->busy_itl == 1) {
4736                                lp->head.itl_task_sa = cpu_to_scr(cp->ccb_ba);
4737                                lp->head.resel_sa =
4738                                      cpu_to_scr(SCRIPTA_BA(np, resel_no_tag));
4739                        }
4740                        else
4741                                goto out_free;
4742#endif
4743                }
4744        }
4745        /*
4746         *  Put the CCB into the busy queue.
4747         */
4748        sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
4749#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
4750        if (lp) {
4751                sym_remque(&cp->link2_ccbq);
4752                sym_insque_tail(&cp->link2_ccbq, &lp->waiting_ccbq);
4753        }
4754
4755#endif
4756        cp->to_abort = 0;
4757        cp->odd_byte_adjustment = 0;
4758        cp->tag    = tag;
4759        cp->order  = tag_order;
4760        cp->target = tn;
4761        cp->lun    = ln;
4762
4763        if (DEBUG_FLAGS & DEBUG_TAGS) {
4764                sym_print_addr(cmd, "ccb @%p using tag %d.\n", cp, tag);
4765        }
4766
4767out:
4768        return cp;
4769out_free:
4770        sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
4771        return NULL;
4772}
4773
4774/*
4775 *  Release one control block
4776 */
4777void sym_free_ccb (struct sym_hcb *np, struct sym_ccb *cp)
4778{
4779        struct sym_tcb *tp = &np->target[cp->target];
4780        struct sym_lcb *lp = sym_lp(tp, cp->lun);
4781
4782        if (DEBUG_FLAGS & DEBUG_TAGS) {
4783                sym_print_addr(cp->cmd, "ccb @%p freeing tag %d.\n",
4784                                cp, cp->tag);
4785        }
4786
4787        /*
4788         *  If LCB available,
4789         */
4790        if (lp) {
4791                /*
4792                 *  If tagged, release the tag, set the relect path 
4793                 */
4794                if (cp->tag != NO_TAG) {
4795#ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
4796                        --lp->tags_sum[cp->tags_si];
4797#endif
4798                        /*
4799                         *  Free the tag value.
4800                         */
4801                        lp->cb_tags[lp->if_tag] = cp->tag;
4802                        if (++lp->if_tag == SYM_CONF_MAX_TASK)
4803                                lp->if_tag = 0;
4804                        /*
4805                         *  Make the reselect path invalid, 
4806                         *  and uncount this CCB.
4807                         */
4808                        lp->itlq_tbl[cp->tag] = cpu_to_scr(np->bad_itlq_ba);
4809                        --lp->busy_itlq;
4810                } else {        /* Untagged */
4811                        /*
4812                         *  Make the reselect path invalid, 
4813                         *  and uncount this CCB.
4814                         */
4815                        lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba);
4816                        --lp->busy_itl;
4817                }
4818                /*
4819                 *  If no JOB active, make the LUN reselect path invalid.
4820                 */
4821                if (lp->busy_itlq == 0 && lp->busy_itl == 0)
4822                        lp->head.resel_sa =
4823                                cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun));
4824        }
4825
4826        /*
4827         *  We donnot queue more than 1 ccb per target 
4828         *  with negotiation at any time. If this ccb was 
4829         *  used for negotiation, clear this info in the tcb.
4830         */
4831        if (cp == tp->nego_cp)
4832                tp->nego_cp = NULL;
4833
4834#ifdef SYM_CONF_IARB_SUPPORT
4835        /*
4836         *  If we just complete the last queued CCB,
4837         *  clear this info that is no longer relevant.
4838         */
4839        if (cp == np->last_cp)
4840                np->last_cp = 0;
4841#endif
4842
4843        /*
4844         *  Make this CCB available.
4845         */
4846        cp->cmd = NULL;
4847        cp->host_status = HS_IDLE;
4848        sym_remque(&cp->link_ccbq);
4849        sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
4850
4851#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
4852        if (lp) {
4853                sym_remque(&cp->link2_ccbq);
4854                sym_insque_tail(&cp->link2_ccbq, &np->dummy_ccbq);
4855                if (cp->started) {
4856                        if (cp->tag != NO_TAG)
4857                                --lp->started_tags;
4858                        else
4859                                --lp->started_no_tag;
4860                }
4861        }
4862        cp->started = 0;
4863#endif
4864}
4865
4866/*
4867 *  Allocate a CCB from memory and initialize its fixed part.
4868 */
4869static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np)
4870{
4871        struct sym_ccb *cp = NULL;
4872        int hcode;
4873
4874        /*
4875         *  Prevent from allocating more CCBs than we can 
4876         *  queue to the controller.
4877         */
4878        if (np->actccbs >= SYM_CONF_MAX_START)
4879                return NULL;
4880
4881        /*
4882         *  Allocate memory for this CCB.
4883         */
4884        cp = sym_calloc_dma(sizeof(struct sym_ccb), "CCB");
4885        if (!cp)
4886                goto out_free;
4887
4888        /*
4889         *  Count it.
4890         */
4891        np->actccbs++;
4892
4893        /*
4894         *  Compute the bus address of this ccb.
4895         */
4896        cp->ccb_ba = vtobus(cp);
4897
4898        /*
4899         *  Insert this ccb into the hashed list.
4900         */
4901        hcode = CCB_HASH_CODE(cp->ccb_ba);
4902        cp->link_ccbh = np->ccbh[hcode];
4903        np->ccbh[hcode] = cp;
4904
4905        /*
4906         *  Initialyze the start and restart actions.
4907         */
4908        cp->phys.head.go.start   = cpu_to_scr(SCRIPTA_BA(np, idle));
4909        cp->phys.head.go.restart = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
4910
4911        /*
4912         *  Initilialyze some other fields.
4913         */
4914        cp->phys.smsg_ext.addr = cpu_to_scr(HCB_BA(np, msgin[2]));
4915
4916        /*
4917         *  Chain into free ccb queue.
4918         */
4919        sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
4920
4921        /*
4922         *  Chain into optionnal lists.
4923         */
4924#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
4925        sym_insque_head(&cp->link2_ccbq, &np->dummy_ccbq);
4926#endif
4927        return cp;
4928out_free:
4929        if (cp)
4930                sym_mfree_dma(cp, sizeof(*cp), "CCB");
4931        return NULL;
4932}
4933
4934/*
4935 *  Look up a CCB from a DSA value.
4936 */
4937static struct sym_ccb *sym_ccb_from_dsa(struct sym_hcb *np, u32 dsa)
4938{
4939        int hcode;
4940        struct sym_ccb *cp;
4941
4942        hcode = CCB_HASH_CODE(dsa);
4943        cp = np->ccbh[hcode];
4944        while (cp) {
4945                if (cp->ccb_ba == dsa)
4946                        break;
4947                cp = cp->link_ccbh;
4948        }
4949
4950        return cp;
4951}
4952
4953/*
4954 *  Target control block initialisation.
4955 *  Nothing important to do at the moment.
4956 */
4957static void sym_init_tcb (struct sym_hcb *np, u_char tn)
4958{
4959#if 0   /*  Hmmm... this checking looks paranoid. */
4960        /*
4961         *  Check some alignments required by the chip.
4962         */     
4963        assert (((offsetof(struct sym_reg, nc_sxfer) ^
4964                offsetof(struct sym_tcb, head.sval)) &3) == 0);
4965        assert (((offsetof(struct sym_reg, nc_scntl3) ^
4966                offsetof(struct sym_tcb, head.wval)) &3) == 0);
4967#endif
4968}
4969
4970/*
4971 *  Lun control block allocation and initialization.
4972 */
4973struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln)
4974{
4975        struct sym_tcb *tp = &np->target[tn];
4976        struct sym_lcb *lp = NULL;
4977
4978        /*
4979         *  Initialize the target control block if not yet.
4980         */
4981        sym_init_tcb (np, tn);
4982
4983        /*
4984         *  Allocate the LCB bus address array.
4985         *  Compute the bus address of this table.
4986         */
4987        if (ln && !tp->luntbl) {
4988                int i;
4989
4990                tp->luntbl = sym_calloc_dma(256, "LUNTBL");
4991                if (!tp->luntbl)
4992                        goto fail;
4993                for (i = 0 ; i < 64 ; i++)
4994                        tp->luntbl[i] = cpu_to_scr(vtobus(&np->badlun_sa));
4995                tp->head.luntbl_sa = cpu_to_scr(vtobus(tp->luntbl));
4996        }
4997
4998        /*
4999         *  Allocate the table of pointers for LUN(s) > 0, if needed.
5000         */
5001        if (ln && !tp->lunmp) {
5002                tp->lunmp = kcalloc(SYM_CONF_MAX_LUN, sizeof(struct sym_lcb *),
5003                                GFP_ATOMIC);
5004                if (!tp->lunmp)
5005                        goto fail;
5006        }
5007
5008        /*
5009         *  Allocate the lcb.
5010         *  Make it available to the chip.
5011         */
5012        lp = sym_calloc_dma(sizeof(struct sym_lcb), "LCB");
5013        if (!lp)
5014                goto fail;
5015        if (ln) {
5016                tp->lunmp[ln] = lp;
5017                tp->luntbl[ln] = cpu_to_scr(vtobus(lp));
5018        }
5019        else {
5020                tp->lun0p = lp;
5021                tp->head.lun0_sa = cpu_to_scr(vtobus(lp));
5022        }
5023        tp->nlcb++;
5024
5025        /*
5026         *  Let the itl task point to error handling.
5027         */
5028        lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba);
5029
5030        /*
5031         *  Set the reselect pattern to our default. :)
5032         */
5033        lp->head.resel_sa = cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun));
5034
5035        /*
5036         *  Set user capabilities.
5037         */
5038        lp->user_flags = tp->usrflags & (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
5039
5040#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5041        /*
5042         *  Initialize device queueing.
5043         */
5044        sym_que_init(&lp->waiting_ccbq);
5045        sym_que_init(&lp->started_ccbq);
5046        lp->started_max   = SYM_CONF_MAX_TASK;
5047        lp->started_limit = SYM_CONF_MAX_TASK;
5048#endif
5049
5050fail:
5051        return lp;
5052}
5053
5054/*
5055 *  Allocate LCB resources for tagged command queuing.
5056 */
5057static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln)
5058{
5059        struct sym_tcb *tp = &np->target[tn];
5060        struct sym_lcb *lp = sym_lp(tp, ln);
5061        int i;
5062
5063        /*
5064         *  Allocate the task table and and the tag allocation 
5065         *  circular buffer. We want both or none.
5066         */
5067        lp->itlq_tbl = sym_calloc_dma(SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
5068        if (!lp->itlq_tbl)
5069                goto fail;
5070        lp->cb_tags = kcalloc(SYM_CONF_MAX_TASK, 1, GFP_ATOMIC);
5071        if (!lp->cb_tags) {
5072                sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
5073                lp->itlq_tbl = NULL;
5074                goto fail;
5075        }
5076
5077        /*
5078         *  Initialize the task table with invalid entries.
5079         */
5080        for (i = 0 ; i < SYM_CONF_MAX_TASK ; i++)
5081                lp->itlq_tbl[i] = cpu_to_scr(np->notask_ba);
5082
5083        /*
5084         *  Fill up the tag buffer with tag numbers.
5085         */
5086        for (i = 0 ; i < SYM_CONF_MAX_TASK ; i++)
5087                lp->cb_tags[i] = i;
5088
5089        /*
5090         *  Make the task table available to SCRIPTS, 
5091         *  And accept tagged commands now.
5092         */
5093        lp->head.itlq_tbl_sa = cpu_to_scr(vtobus(lp->itlq_tbl));
5094
5095        return;
5096fail:
5097        return;
5098}
5099
5100/*
5101 *  Lun control block deallocation. Returns the number of valid remaining LCBs
5102 *  for the target.
5103 */
5104int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln)
5105{
5106        struct sym_tcb *tp = &np->target[tn];
5107        struct sym_lcb *lp = sym_lp(tp, ln);
5108
5109        tp->nlcb--;
5110
5111        if (ln) {
5112                if (!tp->nlcb) {
5113                        kfree(tp->lunmp);
5114                        sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
5115                        tp->lunmp = NULL;
5116                        tp->luntbl = NULL;
5117                        tp->head.luntbl_sa = cpu_to_scr(vtobus(np->badluntbl));
5118                } else {
5119                        tp->luntbl[ln] = cpu_to_scr(vtobus(&np->badlun_sa));
5120                        tp->lunmp[ln] = NULL;
5121                }
5122        } else {
5123                tp->lun0p = NULL;
5124                tp->head.lun0_sa = cpu_to_scr(vtobus(&np->badlun_sa));
5125        }
5126
5127        if (lp->itlq_tbl) {
5128                sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
5129                kfree(lp->cb_tags);
5130        }
5131
5132        sym_mfree_dma(lp, sizeof(*lp), "LCB");
5133
5134        return tp->nlcb;
5135}
5136
5137/*
5138 *  Queue a SCSI IO to the controller.
5139 */
5140int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
5141{
5142        struct scsi_device *sdev = cmd->device;
5143        struct sym_tcb *tp;
5144        struct sym_lcb *lp;
5145        u_char  *msgptr;
5146        u_int   msglen;
5147        int can_disconnect;
5148
5149        /*
5150         *  Keep track of the IO in our CCB.
5151         */
5152        cp->cmd = cmd;
5153
5154        /*
5155         *  Retrieve the target descriptor.
5156         */
5157        tp = &np->target[cp->target];
5158
5159        /*
5160         *  Retrieve the lun descriptor.
5161         */
5162        lp = sym_lp(tp, sdev->lun);
5163
5164        can_disconnect = (cp->tag != NO_TAG) ||
5165                (lp && (lp->curr_flags & SYM_DISC_ENABLED));
5166
5167        msgptr = cp->scsi_smsg;
5168        msglen = 0;
5169        msgptr[msglen++] = IDENTIFY(can_disconnect, sdev->lun);
5170
5171        /*
5172         *  Build the tag message if present.
5173         */
5174        if (cp->tag != NO_TAG) {
5175                u_char order = cp->order;
5176
5177                switch(order) {
5178                case M_ORDERED_TAG:
5179                        break;
5180                case M_HEAD_TAG:
5181                        break;
5182                default:
5183                        order = M_SIMPLE_TAG;
5184                }
5185#ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
5186                /*
5187                 *  Avoid too much reordering of SCSI commands.
5188                 *  The algorithm tries to prevent completion of any 
5189                 *  tagged command from being delayed against more 
5190                 *  than 3 times the max number of queued commands.
5191                 */
5192                if (lp && lp->tags_since > 3*SYM_CONF_MAX_TAG) {
5193                        lp->tags_si = !(lp->tags_si);
5194                        if (lp->tags_sum[lp->tags_si]) {
5195                                order = M_ORDERED_TAG;
5196                                if ((DEBUG_FLAGS & DEBUG_TAGS)||sym_verbose>1) {
5197                                        sym_print_addr(cmd,
5198                                                "ordered tag forced.\n");
5199                                }
5200                        }
5201                        lp->tags_since = 0;
5202                }
5203#endif
5204                msgptr[msglen++] = order;
5205
5206                /*
5207                 *  For less than 128 tags, actual tags are numbered 
5208                 *  1,3,5,..2*MAXTAGS+1,since we may have to deal 
5209                 *  with devices that have problems with #TAG 0 or too 
5210                 *  great #TAG numbers. For more tags (up to 256), 
5211                 *  we use directly our tag number.
5212                 */
5213#if SYM_CONF_MAX_TASK > (512/4)
5214                msgptr[msglen++] = cp->tag;
5215#else
5216                msgptr[msglen++] = (cp->tag << 1) + 1;
5217#endif
5218        }
5219
5220        /*
5221         *  Build a negotiation message if needed.
5222         *  (nego_status is filled by sym_prepare_nego())
5223         *
5224         *  Always negotiate on INQUIRY and REQUEST SENSE.
5225         *
5226         */
5227        cp->nego_status = 0;
5228        if ((tp->tgoal.check_nego ||
5229             cmd->cmnd[0] == INQUIRY || cmd->cmnd[0] == REQUEST_SENSE) &&
5230            !tp->nego_cp && lp) {
5231                msglen += sym_prepare_nego(np, cp, msgptr + msglen);
5232        }
5233
5234        /*
5235         *  Startqueue
5236         */
5237        cp->phys.head.go.start   = cpu_to_scr(SCRIPTA_BA(np, select));
5238        cp->phys.head.go.restart = cpu_to_scr(SCRIPTA_BA(np, resel_dsa));
5239
5240        /*
5241         *  select
5242         */
5243        cp->phys.select.sel_id          = cp->target;
5244        cp->phys.select.sel_scntl3      = tp->head.wval;
5245        cp->phys.select.sel_sxfer       = tp->head.sval;
5246        cp->phys.select.sel_scntl4      = tp->head.uval;
5247
5248        /*
5249         *  message
5250         */
5251        cp->phys.smsg.addr      = CCB_BA(cp, scsi_smsg);
5252        cp->phys.smsg.size      = cpu_to_scr(msglen);
5253
5254        /*
5255         *  status
5256         */
5257        cp->host_xflags         = 0;
5258        cp->host_status         = cp->nego_status ? HS_NEGOTIATE : HS_BUSY;
5259        cp->ssss_status         = S_ILLEGAL;
5260        cp->xerr_status         = 0;
5261        cp->host_flags          = 0;
5262        cp->extra_bytes         = 0;
5263
5264        /*
5265         *  extreme data pointer.
5266         *  shall be positive, so -1 is lower than lowest.:)
5267         */
5268        cp->ext_sg  = -1;
5269        cp->ext_ofs = 0;
5270
5271        /*
5272         *  Build the CDB and DATA descriptor block 
5273         *  and start the IO.
5274         */
5275        return sym_setup_data_and_start(np, cmd, cp);
5276}
5277
5278/*
5279 *  Reset a SCSI target (all LUNs of this target).
5280 */
5281int sym_reset_scsi_target(struct sym_hcb *np, int target)
5282{
5283        struct sym_tcb *tp;
5284
5285        if (target == np->myaddr || (u_int)target >= SYM_CONF_MAX_TARGET)
5286                return -1;
5287
5288        tp = &np->target[target];
5289        tp->to_reset = 1;
5290
5291        np->istat_sem = SEM;
5292        OUTB(np, nc_istat, SIGP|SEM);
5293
5294        return 0;
5295}
5296
5297/*
5298 *  Abort a SCSI IO.
5299 */
5300static int sym_abort_ccb(struct sym_hcb *np, struct sym_ccb *cp, int timed_out)
5301{
5302        /*
5303         *  Check that the IO is active.
5304         */
5305        if (!cp || !cp->host_status || cp->host_status == HS_WAIT)
5306                return -1;
5307
5308        /*
5309         *  If a previous abort didn't succeed in time,
5310         *  perform a BUS reset.
5311         */
5312        if (cp->to_abort) {
5313                sym_reset_scsi_bus(np, 1);
5314                return 0;
5315        }
5316
5317        /*
5318         *  Mark the CCB for abort and allow time for.
5319         */
5320        cp->to_abort = timed_out ? 2 : 1;
5321
5322        /*
5323         *  Tell the SCRIPTS processor to stop and synchronize with us.
5324         */
5325        np->istat_sem = SEM;
5326        OUTB(np, nc_istat, SIGP|SEM);
5327        return 0;
5328}
5329
5330int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, int timed_out)
5331{
5332        struct sym_ccb *cp;
5333        SYM_QUEHEAD *qp;
5334
5335        /*
5336         *  Look up our CCB control block.
5337         */
5338        cp = NULL;
5339        FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
5340                struct sym_ccb *cp2 = sym_que_entry(qp, struct sym_ccb, link_ccbq);
5341                if (cp2->cmd == cmd) {
5342                        cp = cp2;
5343                        break;
5344                }
5345        }
5346
5347        return sym_abort_ccb(np, cp, timed_out);
5348}
5349
5350/*
5351 *  Complete execution of a SCSI command with extended 
5352 *  error, SCSI status error, or having been auto-sensed.
5353 *
5354 *  The SCRIPTS processor is not running there, so we 
5355 *  can safely access IO registers and remove JOBs from  
5356 *  the START queue.
5357 *  SCRATCHA is assumed to have been loaded with STARTPOS 
5358 *  before the SCRIPTS called the C code.
5359 */
5360void sym_complete_error(struct sym_hcb *np, struct sym_ccb *cp)
5361{
5362        struct scsi_device *sdev;
5363        struct scsi_cmnd *cmd;
5364        struct sym_tcb *tp;
5365        struct sym_lcb *lp;
5366        int resid;
5367        int i;
5368
5369        /*
5370         *  Paranoid check. :)
5371         */
5372        if (!cp || !cp->cmd)
5373                return;
5374
5375        cmd = cp->cmd;
5376        sdev = cmd->device;
5377        if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_RESULT)) {
5378                dev_info(&sdev->sdev_gendev, "CCB=%p STAT=%x/%x/%x\n", cp,
5379                        cp->host_status, cp->ssss_status, cp->host_flags);
5380        }
5381
5382        /*
5383         *  Get target and lun pointers.
5384         */
5385        tp = &np->target[cp->target];
5386        lp = sym_lp(tp, sdev->lun);
5387
5388        /*
5389         *  Check for extended errors.
5390         */
5391        if (cp->xerr_status) {
5392                if (sym_verbose)
5393                        sym_print_xerr(cmd, cp->xerr_status);
5394                if (cp->host_status == HS_COMPLETE)
5395                        cp->host_status = HS_COMP_ERR;
5396        }
5397
5398        /*
5399         *  Calculate the residual.
5400         */
5401        resid = sym_compute_residual(np, cp);
5402
5403        if (!SYM_SETUP_RESIDUAL_SUPPORT) {/* If user does not want residuals */
5404                resid  = 0;              /* throw them away. :)             */
5405                cp->sv_resid = 0;
5406        }
5407#ifdef DEBUG_2_0_X
5408if (resid)
5409        printf("XXXX RESID= %d - 0x%x\n", resid, resid);
5410#endif
5411
5412        /*
5413         *  Dequeue all queued CCBs for that device 
5414         *  not yet started by SCRIPTS.
5415         */
5416        i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
5417        i = sym_dequeue_from_squeue(np, i, cp->target, sdev->lun, -1);
5418
5419        /*
5420         *  Restart the SCRIPTS processor.
5421         */
5422        OUTL_DSP(np, SCRIPTA_BA(np, start));
5423
5424#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5425        if (cp->host_status == HS_COMPLETE &&
5426            cp->ssss_status == S_QUEUE_FULL) {
5427                if (!lp || lp->started_tags - i < 2)
5428                        goto weirdness;
5429                /*
5430                 *  Decrease queue depth as needed.
5431                 */
5432                lp->started_max = lp->started_tags - i - 1;
5433                lp->num_sgood = 0;
5434
5435                if (sym_verbose >= 2) {
5436                        sym_print_addr(cmd, " queue depth is now %d\n",
5437                                        lp->started_max);
5438                }
5439
5440                /*
5441                 *  Repair the CCB.
5442                 */
5443                cp->host_status = HS_BUSY;
5444                cp->ssss_status = S_ILLEGAL;
5445
5446                /*
5447                 *  Let's requeue it to device.
5448                 */
5449                sym_set_cam_status(cmd, DID_SOFT_ERROR);
5450                goto finish;
5451        }
5452weirdness:
5453#endif
5454        /*
5455         *  Build result in CAM ccb.
5456         */
5457        sym_set_cam_result_error(np, cp, resid);
5458
5459#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5460finish:
5461#endif
5462        /*
5463         *  Add this one to the COMP queue.
5464         */
5465        sym_remque(&cp->link_ccbq);
5466        sym_insque_head(&cp->link_ccbq, &np->comp_ccbq);
5467
5468        /*
5469         *  Complete all those commands with either error 
5470         *  or requeue condition.
5471         */
5472        sym_flush_comp_queue(np, 0);
5473
5474#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5475        /*
5476         *  Donnot start more than 1 command after an error.
5477         */
5478        sym_start_next_ccbs(np, lp, 1);
5479#endif
5480}
5481
5482/*
5483 *  Complete execution of a successful SCSI command.
5484 *
5485 *  Only successful commands go to the DONE queue, 
5486 *  since we need to have the SCRIPTS processor 
5487 *  stopped on any error condition.
5488 *  The SCRIPTS processor is running while we are 
5489 *  completing successful commands.
5490 */
5491void sym_complete_ok (struct sym_hcb *np, struct sym_ccb *cp)
5492{
5493        struct sym_tcb *tp;
5494        struct sym_lcb *lp;
5495        struct scsi_cmnd *cmd;
5496        int resid;
5497
5498        /*
5499         *  Paranoid check. :)
5500         */
5501        if (!cp || !cp->cmd)
5502                return;
5503        assert (cp->host_status == HS_COMPLETE);
5504
5505        /*
5506         *  Get user command.
5507         */
5508        cmd = cp->cmd;
5509
5510        /*
5511         *  Get target and lun pointers.
5512         */
5513        tp = &np->target[cp->target];
5514        lp = sym_lp(tp, cp->lun);
5515
5516        /*
5517         *  If all data have been transferred, given than no
5518         *  extended error did occur, there is no residual.
5519         */
5520        resid = 0;
5521        if (cp->phys.head.lastp != cp->goalp)
5522                resid = sym_compute_residual(np, cp);
5523
5524        /*
5525         *  Wrong transfer residuals may be worse than just always 
5526         *  returning zero. User can disable this feature in 
5527         *  sym53c8xx.h. Residual support is enabled by default.
5528         */
5529        if (!SYM_SETUP_RESIDUAL_SUPPORT)
5530                resid  = 0;
5531#ifdef DEBUG_2_0_X
5532if (resid)
5533        printf("XXXX RESID= %d - 0x%x\n", resid, resid);
5534#endif
5535
5536        /*
5537         *  Build result in CAM ccb.
5538         */
5539        sym_set_cam_result_ok(cp, cmd, resid);
5540
5541#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5542        /*
5543         *  If max number of started ccbs had been reduced,
5544         *  increase it if 200 good status received.
5545         */
5546        if (lp && lp->started_max < lp->started_limit) {
5547                ++lp->num_sgood;
5548                if (lp->num_sgood >= 200) {
5549                        lp->num_sgood = 0;
5550                        ++lp->started_max;
5551                        if (sym_verbose >= 2) {
5552                                sym_print_addr(cmd, " queue depth is now %d\n",
5553                                       lp->started_max);
5554                        }
5555                }
5556        }
5557#endif
5558
5559        /*
5560         *  Free our CCB.
5561         */
5562        sym_free_ccb (np, cp);
5563
5564#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5565        /*
5566         *  Requeue a couple of awaiting scsi commands.
5567         */
5568        if (!sym_que_empty(&lp->waiting_ccbq))
5569                sym_start_next_ccbs(np, lp, 2);
5570#endif
5571        /*
5572         *  Complete the command.
5573         */
5574        sym_xpt_done(np, cmd);
5575}
5576
5577/*
5578 *  Soft-attach the controller.
5579 */
5580int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram *nvram)
5581{
5582        struct sym_hcb *np = sym_get_hcb(shost);
5583        int i;
5584
5585        /*
5586         *  Get some info about the firmware.
5587         */
5588        np->scripta_sz   = fw->a_size;
5589        np->scriptb_sz   = fw->b_size;
5590        np->scriptz_sz   = fw->z_size;
5591        np->fw_setup     = fw->setup;
5592        np->fw_patch     = fw->patch;
5593        np->fw_name      = fw->name;
5594
5595        /*
5596         *  Save setting of some IO registers, so we will 
5597         *  be able to probe specific implementations.
5598         */
5599        sym_save_initial_setting (np);
5600
5601        /*
5602         *  Reset the chip now, since it has been reported 
5603         *  that SCSI clock calibration may not work properly 
5604         *  if the chip is currently active.
5605         */
5606        sym_chip_reset(np);
5607
5608        /*
5609         *  Prepare controller and devices settings, according 
5610         *  to chip features, user set-up and driver set-up.
5611         */
5612        sym_prepare_setting(shost, np, nvram);
5613
5614        /*
5615         *  Check the PCI clock frequency.
5616         *  Must be performed after prepare_setting since it destroys 
5617         *  STEST1 that is used to probe for the clock doubler.
5618         */
5619        i = sym_getpciclock(np);
5620        if (i > 37000 && !(np->features & FE_66MHZ))
5621                printf("%s: PCI BUS clock seems too high: %u KHz.\n",
5622                        sym_name(np), i);
5623
5624        /*
5625         *  Allocate the start queue.
5626         */
5627        np->squeue = sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"SQUEUE");
5628        if (!np->squeue)
5629                goto attach_failed;
5630        np->squeue_ba = vtobus(np->squeue);
5631
5632        /*
5633         *  Allocate the done queue.
5634         */
5635        np->dqueue = sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"DQUEUE");
5636        if (!np->dqueue)
5637                goto attach_failed;
5638        np->dqueue_ba = vtobus(np->dqueue);
5639
5640        /*
5641         *  Allocate the target bus address array.
5642         */
5643        np->targtbl = sym_calloc_dma(256, "TARGTBL");
5644        if (!np->targtbl)
5645                goto attach_failed;
5646        np->targtbl_ba = vtobus(np->targtbl);
5647
5648        /*
5649         *  Allocate SCRIPTS areas.
5650         */
5651        np->scripta0 = sym_calloc_dma(np->scripta_sz, "SCRIPTA0");
5652        np->scriptb0 = sym_calloc_dma(np->scriptb_sz, "SCRIPTB0");
5653        np->scriptz0 = sym_calloc_dma(np->scriptz_sz, "SCRIPTZ0");
5654        if (!np->scripta0 || !np->scriptb0 || !np->scriptz0)
5655                goto attach_failed;
5656
5657        /*
5658         *  Allocate the array of lists of CCBs hashed by DSA.
5659         */
5660        np->ccbh = kcalloc(CCB_HASH_SIZE, sizeof(struct sym_ccb **), GFP_KERNEL);
5661        if (!np->ccbh)
5662                goto attach_failed;
5663
5664        /*
5665         *  Initialyze the CCB free and busy queues.
5666         */
5667        sym_que_init(&np->free_ccbq);
5668        sym_que_init(&np->busy_ccbq);
5669        sym_que_init(&np->comp_ccbq);
5670
5671        /*
5672         *  Initialization for optional handling 
5673         *  of device queueing.
5674         */
5675#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5676        sym_que_init(&np->dummy_ccbq);
5677#endif
5678        /*
5679         *  Allocate some CCB. We need at least ONE.
5680         */
5681        if (!sym_alloc_ccb(np))
5682                goto attach_failed;
5683
5684        /*
5685         *  Calculate BUS addresses where we are going 
5686         *  to load the SCRIPTS.
5687         */
5688        np->scripta_ba  = vtobus(np->scripta0);
5689        np->scriptb_ba  = vtobus(np->scriptb0);
5690        np->scriptz_ba  = vtobus(np->scriptz0);
5691
5692        if (np->ram_ba) {
5693                np->scripta_ba = np->ram_ba;
5694                if (np->features & FE_RAM8K) {
5695                        np->scriptb_ba = np->scripta_ba + 4096;
5696#if 0   /* May get useful for 64 BIT PCI addressing */
5697                        np->scr_ram_seg = cpu_to_scr(np->scripta_ba >> 32);
5698#endif
5699                }
5700        }
5701
5702        /*
5703         *  Copy scripts to controller instance.
5704         */
5705        memcpy(np->scripta0, fw->a_base, np->scripta_sz);
5706        memcpy(np->scriptb0, fw->b_base, np->scriptb_sz);
5707        memcpy(np->scriptz0, fw->z_base, np->scriptz_sz);
5708
5709        /*
5710         *  Setup variable parts in scripts and compute
5711         *  scripts bus addresses used from the C code.
5712         */
5713        np->fw_setup(np, fw);
5714
5715        /*
5716         *  Bind SCRIPTS with physical addresses usable by the 
5717         *  SCRIPTS processor (as seen from the BUS = BUS addresses).
5718         */
5719        sym_fw_bind_script(np, (u32 *) np->scripta0, np->scripta_sz);
5720        sym_fw_bind_script(np, (u32 *) np->scriptb0, np->scriptb_sz);
5721        sym_fw_bind_script(np, (u32 *) np->scriptz0, np->scriptz_sz);
5722
5723#ifdef SYM_CONF_IARB_SUPPORT
5724        /*
5725         *    If user wants IARB to be set when we win arbitration 
5726         *    and have other jobs, compute the max number of consecutive 
5727         *    settings of IARB hints before we leave devices a chance to 
5728         *    arbitrate for reselection.
5729         */
5730#ifdef  SYM_SETUP_IARB_MAX
5731        np->iarb_max = SYM_SETUP_IARB_MAX;
5732#else
5733        np->iarb_max = 4;
5734#endif
5735#endif
5736
5737        /*
5738         *  Prepare the idle and invalid task actions.
5739         */
5740        np->idletask.start      = cpu_to_scr(SCRIPTA_BA(np, idle));
5741        np->idletask.restart    = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
5742        np->idletask_ba         = vtobus(&np->idletask);
5743
5744        np->notask.start        = cpu_to_scr(SCRIPTA_BA(np, idle));
5745        np->notask.restart      = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
5746        np->notask_ba           = vtobus(&np->notask);
5747
5748        np->bad_itl.start       = cpu_to_scr(SCRIPTA_BA(np, idle));
5749        np->bad_itl.restart     = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
5750        np->bad_itl_ba          = vtobus(&np->bad_itl);
5751
5752        np->bad_itlq.start      = cpu_to_scr(SCRIPTA_BA(np, idle));
5753        np->bad_itlq.restart    = cpu_to_scr(SCRIPTB_BA(np,bad_i_t_l_q));
5754        np->bad_itlq_ba         = vtobus(&np->bad_itlq);
5755
5756        /*
5757         *  Allocate and prepare the lun JUMP table that is used 
5758         *  for a target prior the probing of devices (bad lun table).
5759         *  A private table will be allocated for the target on the 
5760         *  first INQUIRY response received.
5761         */
5762        np->badluntbl = sym_calloc_dma(256, "BADLUNTBL");
5763        if (!np->badluntbl)
5764                goto attach_failed;
5765
5766        np->badlun_sa = cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun));
5767        for (i = 0 ; i < 64 ; i++)      /* 64 luns/target, no less */
5768                np->badluntbl[i] = cpu_to_scr(vtobus(&np->badlun_sa));
5769
5770        /*
5771         *  Prepare the bus address array that contains the bus 
5772         *  address of each target control block.
5773         *  For now, assume all logical units are wrong. :)
5774         */
5775        for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
5776                np->targtbl[i] = cpu_to_scr(vtobus(&np->target[i]));
5777                np->target[i].head.luntbl_sa =
5778                                cpu_to_scr(vtobus(np->badluntbl));
5779                np->target[i].head.lun0_sa =
5780                                cpu_to_scr(vtobus(&np->badlun_sa));
5781        }
5782
5783        /*
5784         *  Now check the cache handling of the pci chipset.
5785         */
5786        if (sym_snooptest (np)) {
5787                printf("%s: CACHE INCORRECTLY CONFIGURED.\n", sym_name(np));
5788                goto attach_failed;
5789        }
5790
5791        /*
5792         *  Sigh! we are done.
5793         */
5794        return 0;
5795
5796attach_failed:
5797        return -ENXIO;
5798}
5799
5800/*
5801 *  Free everything that has been allocated for this device.
5802 */
5803void sym_hcb_free(struct sym_hcb *np)
5804{
5805        SYM_QUEHEAD *qp;
5806        struct sym_ccb *cp;
5807        struct sym_tcb *tp;
5808        int target;
5809
5810        if (np->scriptz0)
5811                sym_mfree_dma(np->scriptz0, np->scriptz_sz, "SCRIPTZ0");
5812        if (np->scriptb0)
5813                sym_mfree_dma(np->scriptb0, np->scriptb_sz, "SCRIPTB0");
5814        if (np->scripta0)
5815                sym_mfree_dma(np->scripta0, np->scripta_sz, "SCRIPTA0");
5816        if (np->squeue)
5817                sym_mfree_dma(np->squeue, sizeof(u32)*(MAX_QUEUE*2), "SQUEUE");
5818        if (np->dqueue)
5819                sym_mfree_dma(np->dqueue, sizeof(u32)*(MAX_QUEUE*2), "DQUEUE");
5820
5821        if (np->actccbs) {
5822                while ((qp = sym_remque_head(&np->free_ccbq)) != NULL) {
5823                        cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
5824                        sym_mfree_dma(cp, sizeof(*cp), "CCB");
5825                }
5826        }
5827        kfree(np->ccbh);
5828
5829        if (np->badluntbl)
5830                sym_mfree_dma(np->badluntbl, 256,"BADLUNTBL");
5831
5832        for (target = 0; target < SYM_CONF_MAX_TARGET ; target++) {
5833                tp = &np->target[target];
5834                if (tp->luntbl)
5835                        sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
5836#if SYM_CONF_MAX_LUN > 1
5837                kfree(tp->lunmp);
5838#endif 
5839        }
5840        if (np->targtbl)
5841                sym_mfree_dma(np->targtbl, 256, "TARGTBL");
5842}
5843