/*
 * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
 *
 * Copyright (C) 2000-2002 Lineo
 *      by Stuart Lynne, Tom Rushworth, and Bruce Balden
 * Copyright (C) 2002 Toshiba Corporation
 * Copyright (C) 2003 MontaVista Software (source@mvista.com)
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

/*
 * This device has ep0 and three semi-configurable bulk/interrupt endpoints.
 *
 *  - Endpoint numbering is fixed: ep{1,2,3}-bulk
 *  - Gadget drivers can choose ep maxpacket (8/16/32/64)
 *  - Gadget drivers can choose direction (IN, OUT)
 *  - DMA works with ep1 (OUT transfers) and ep2 (IN transfers).
 */

// #define      VERBOSE         /* extra debug messages (success too) */
// #define      USB_TRACE       /* packet-level success messages */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/prefetch.h>

#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/unaligned.h>


#include "goku_udc.h"

#define DRIVER_DESC             "TC86C001 USB Device Controller"
#define DRIVER_VERSION          "30-Oct 2003"

static const char driver_name [] = "goku_udc";
static const char driver_desc [] = DRIVER_DESC;

MODULE_AUTHOR("source@mvista.com");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");


/*
 * IN dma behaves ok under testing, though the IN-dma abort paths don't
 * seem to behave quite as expected.  Used by default.
 *
 * OUT dma documents design problems handling the common "short packet"
 * transfer termination policy; it couldn't be enabled by default, even
 * if the OUT-dma abort problems had a resolution.
 */
static unsigned use_dma = 1;

#if 0
//#include <linux/moduleparam.h>
/* "modprobe goku_udc use_dma=1" etc
 *      0 to disable dma
 *      1 to use IN dma only (normal operation)
 *      2 to use IN and OUT dma
 */
module_param(use_dma, uint, S_IRUGO);
#endif

/*-------------------------------------------------------------------------*/

static void nuke(struct goku_ep *, int status);

static inline void
command(struct goku_udc_regs __iomem *regs, int command, unsigned epnum)
{
        writel(COMMAND_EP(epnum) | command, &regs->Command);
        udelay(300);
}

static int
goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
{
        struct goku_udc *dev;
        struct goku_ep  *ep;
        u32             mode;
        u16             max;
        unsigned long   flags;

        ep = container_of(_ep, struct goku_ep, ep);
        if (!_ep || !desc
                        || desc->bDescriptorType != USB_DT_ENDPOINT)
                return -EINVAL;
        dev = ep->dev;
        if (ep == &dev->ep[0])
                return -EINVAL;
        if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
                return -ESHUTDOWN;
        if (ep->num != usb_endpoint_num(desc))
                return -EINVAL;

        switch (usb_endpoint_type(desc)) {
        case USB_ENDPOINT_XFER_BULK:
        case USB_ENDPOINT_XFER_INT:
                break;
        default:
                return -EINVAL;
        }

        if ((readl(ep->reg_status) & EPxSTATUS_EP_MASK)
                        != EPxSTATUS_EP_INVALID)
                return -EBUSY;

        /* enabling the no-toggle interrupt mode would need an api hook */
        mode = 0;
        max = get_unaligned_le16(&desc->wMaxPacketSize);
        switch (max) {
        case 64:        mode++;
        case 32:        mode++;
        case 16:        mode++;
        case 8:         mode <<= 3;
                        break;
        default:
                return -EINVAL;
        }
        mode |= 2 << 1;         /* bulk, or intr-with-toggle */

        /* ep1/ep2 dma direction is chosen early; it works in the other
         * direction, with pio.  be cautious with out-dma.
         */
        ep->is_in = usb_endpoint_dir_in(desc);
        if (ep->is_in) {
                mode |= 1;
                ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT);
        } else {
                ep->dma = (use_dma == 2) && (ep->num == UDC_MSTWR_ENDPOINT);
                if (ep->dma)
                        DBG(dev, "%s out-dma hides short packets\n",
                                ep->ep.name);
        }

        spin_lock_irqsave(&ep->dev->lock, flags);

        /* ep1 and ep2 can do double buffering and/or dma */
        if (ep->num < 3) {
                struct goku_udc_regs __iomem    *regs = ep->dev->regs;
                u32                             tmp;

                /* double buffer except (for now) with pio in */
                tmp = ((ep->dma || !ep->is_in)
                                ? 0x10  /* double buffered */
                                : 0x11  /* single buffer */
                        ) << ep->num;
                tmp |= readl(&regs->EPxSingle);
                writel(tmp, &regs->EPxSingle);

                tmp = (ep->dma ? 0x10/*dma*/ : 0x11/*pio*/) << ep->num;
                tmp |= readl(&regs->EPxBCS);
                writel(tmp, &regs->EPxBCS);
        }
        writel(mode, ep->reg_mode);
        command(ep->dev->regs, COMMAND_RESET, ep->num);
        ep->ep.maxpacket = max;
        ep->stopped = 0;
        ep->ep.desc = desc;
        spin_unlock_irqrestore(&ep->dev->lock, flags);

        DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name,
                ep->is_in ? "IN" : "OUT",
                ep->dma ? "dma" : "pio",
                max);

        return 0;
}

static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep)
{
        struct goku_udc         *dev = ep->dev;

        if (regs) {
                command(regs, COMMAND_INVALID, ep->num);
                if (ep->num) {
                        if (ep->num == UDC_MSTWR_ENDPOINT)
                                dev->int_enable &= ~(INT_MSTWREND
                                                        |INT_MSTWRTMOUT);
                        else if (ep->num == UDC_MSTRD_ENDPOINT)
                                dev->int_enable &= ~INT_MSTRDEND;
                        dev->int_enable &= ~INT_EPxDATASET (ep->num);
                } else
                        dev->int_enable &= ~INT_EP0;
                writel(dev->int_enable, &regs->int_enable);
                readl(&regs->int_enable);
                if (ep->num < 3) {
                        struct goku_udc_regs __iomem    *r = ep->dev->regs;
                        u32                             tmp;

                        tmp = readl(&r->EPxSingle);
                        tmp &= ~(0x11 << ep->num);
                        writel(tmp, &r->EPxSingle);

                        tmp = readl(&r->EPxBCS);
                        tmp &= ~(0x11 << ep->num);
                        writel(tmp, &r->EPxBCS);
                }
                /* reset dma in case we're still using it */
                if (ep->dma) {
                        u32     master;

                        master = readl(&regs->dma_master) & MST_RW_BITS;
                        if (ep->num == UDC_MSTWR_ENDPOINT) {
                                master &= ~MST_W_BITS;
                                master |= MST_WR_RESET;
                        } else {
                                master &= ~MST_R_BITS;
                                master |= MST_RD_RESET;
                        }
                        writel(master, &regs->dma_master);
                }
        }

        usb_ep_set_maxpacket_limit(&ep->ep, MAX_FIFO_SIZE);
        ep->ep.desc = NULL;
        ep->stopped = 1;
        ep->irqs = 0;
        ep->dma = 0;
}

static int goku_ep_disable(struct usb_ep *_ep)
{
        struct goku_ep  *ep;
        struct goku_udc *dev;
        unsigned long   flags;

        ep = container_of(_ep, struct goku_ep, ep);
        if (!_ep || !ep->ep.desc)
                return -ENODEV;
        dev = ep->dev;
        if (dev->ep0state == EP0_SUSPEND)
                return -EBUSY;

        VDBG(dev, "disable %s\n", _ep->name);

        spin_lock_irqsave(&dev->lock, flags);
        nuke(ep, -ESHUTDOWN);
        ep_reset(dev->regs, ep);
        spin_unlock_irqrestore(&dev->lock, flags);

        return 0;
}

/*-------------------------------------------------------------------------*/

static struct usb_request *
goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
{
        struct goku_request     *req;

        if (!_ep)
                return NULL;
        req = kzalloc(sizeof *req, gfp_flags);
        if (!req)
                return NULL;

        INIT_LIST_HEAD(&req->queue);
        return &req->req;
}

static void
goku_free_request(struct usb_ep *_ep, struct usb_request *_req)
{
        struct goku_request     *req;

        if (!_ep || !_req)
                return;

        req = container_of(_req, struct goku_request, req);
        WARN_ON(!list_empty(&req->queue));
        kfree(req);
}

/*-------------------------------------------------------------------------*/

static void
done(struct goku_ep *ep, struct goku_request *req, int status)
{
        struct goku_udc         *dev;
        unsigned                stopped = ep->stopped;

        list_del_init(&req->queue);

        if (likely(req->req.status == -EINPROGRESS))
                req->req.status = status;
        else
                status = req->req.status;

        dev = ep->dev;

        if (ep->dma)
                usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in);

#ifndef USB_TRACE
        if (status && status != -ESHUTDOWN)
#endif
                VDBG(dev, "complete %s req %p stat %d len %u/%u\n",
                        ep->ep.name, &req->req, status,
                        req->req.actual, req->req.length);

        /* don't modify queue heads during completion callback */
        ep->stopped = 1;
        spin_unlock(&dev->lock);
        usb_gadget_giveback_request(&ep->ep, &req->req);
        spin_lock(&dev->lock);
        ep->stopped = stopped;
}

/*-------------------------------------------------------------------------*/

static inline int
write_packet(u32 __iomem *fifo, u8 *buf, struct goku_request *req, unsigned max)
{
        unsigned        length, count;

        length = min(req->req.length - req->req.actual, max);
        req->req.actual += length;

        count = length;
        while (likely(count--))
                writel(*buf++, fifo);
        return length;
}

// return:  0 = still running, 1 = completed, negative = errno
static int write_fifo(struct goku_ep *ep, struct goku_request *req)
{
        struct goku_udc *dev = ep->dev;
        u32             tmp;
        u8              *buf;
        unsigned        count;
        int             is_last;

        tmp = readl(&dev->regs->DataSet);
        buf = req->req.buf + req->req.actual;
        prefetch(buf);

        dev = ep->dev;
        if (unlikely(ep->num == 0 && dev->ep0state != EP0_IN))
                return -EL2HLT;

        /* NOTE:  just single-buffered PIO-IN for now.  */
        if (unlikely((tmp & DATASET_A(ep->num)) != 0))
                return 0;

        /* clear our "packet available" irq */
        if (ep->num != 0)
                writel(~INT_EPxDATASET(ep->num), &dev->regs->int_status);

        count = write_packet(ep->reg_fifo, buf, req, ep->ep.maxpacket);

        /* last packet often short (sometimes a zlp, especially on ep0) */
        if (unlikely(count != ep->ep.maxpacket)) {
                writel(~(1<<ep->num), &dev->regs->EOP);
                if (ep->num == 0) {
                        dev->ep[0].stopped = 1;
                        dev->ep0state = EP0_STATUS;
                }
                is_last = 1;
        } else {
                if (likely(req->req.length != req->req.actual)
                                || req->req.zero)
                        is_last = 0;
                else
                        is_last = 1;
        }
#if 0           /* printk seemed to trash is_last...*/
//#ifdef USB_TRACE
        VDBG(dev, "wrote %s %u bytes%s IN %u left %p\n",
                ep->ep.name, count, is_last ? "/last" : "",
                req->req.length - req->req.actual, req);
#endif

        /* requests complete when all IN data is in the FIFO,
         * or sometimes later, if a zlp was needed.
         */
        if (is_last) {
                done(ep, req, 0);
                return 1;
        }

        return 0;
}

static int read_fifo(struct goku_ep *ep, struct goku_request *req)
{
        struct goku_udc_regs __iomem    *regs;
        u32                             size, set;
        u8                              *buf;
        unsigned                        bufferspace, is_short, dbuff;

        regs = ep->dev->regs;
top:
        buf = req->req.buf + req->req.actual;
        prefetchw(buf);

        if (unlikely(ep->num == 0 && ep->dev->ep0state != EP0_OUT))
                return -EL2HLT;

        dbuff = (ep->num == 1 || ep->num == 2);
        do {
                /* ack dataset irq matching the status we'll handle */
                if (ep->num != 0)
                        writel(~INT_EPxDATASET(ep->num), &regs->int_status);

                set = readl(&regs->DataSet) & DATASET_AB(ep->num);
                size = readl(&regs->EPxSizeLA[ep->num]);
                bufferspace = req->req.length - req->req.actual;

                /* usually do nothing without an OUT packet */
                if (likely(ep->num != 0 || bufferspace != 0)) {
                        if (unlikely(set == 0))
                                break;
                        /* use ep1/ep2 double-buffering for OUT */
                        if (!(size & PACKET_ACTIVE))
                                size = readl(&regs->EPxSizeLB[ep->num]);
                        if (!(size & PACKET_ACTIVE))    /* "can't happen" */
                                break;
                        size &= DATASIZE;       /* EPxSizeH == 0 */

                /* ep0out no-out-data case for set_config, etc */
                } else
                        size = 0;

                /* read all bytes from this packet */
                req->req.actual += size;
                is_short = (size < ep->ep.maxpacket);
#ifdef USB_TRACE
                VDBG(ep->dev, "read %s %u bytes%s OUT req %p %u/%u\n",
                        ep->ep.name, size, is_short ? "/S" : "",
                        req, req->req.actual, req->req.length);
#endif
                while (likely(size-- != 0)) {
                        u8      byte = (u8) readl(ep->reg_fifo);

                        if (unlikely(bufferspace == 0)) {
                                /* this happens when the driver's buffer
                                 * is smaller than what the host sent.
                                 * discard the extra data in this packet.
                                 */
                                if (req->req.status != -EOVERFLOW)
                                        DBG(ep->dev, "%s overflow %u\n",
                                                ep->ep.name, size);
                                req->req.status = -EOVERFLOW;
                        } else {
                                *buf++ = byte;
                                bufferspace--;
                        }
                }

                /* completion */
                if (unlikely(is_short || req->req.actual == req->req.length)) {
                        if (unlikely(ep->num == 0)) {
                                /* non-control endpoints now usable? */
                                if (ep->dev->req_config)
                                        writel(ep->dev->configured
                                                        ? USBSTATE_CONFIGURED
                                                        : 0,
                                                &regs->UsbState);
                                /* ep0out status stage */
                                writel(~(1<<0), &regs->EOP);
                                ep->stopped = 1;
                                ep->dev->ep0state = EP0_STATUS;
                        }
                        done(ep, req, 0);

                        /* empty the second buffer asap */
                        if (dbuff && !list_empty(&ep->queue)) {
                                req = list_entry(ep->queue.next,
                                                struct goku_request, queue);
                                goto top;
                        }
                        return 1;
                }
        } while (dbuff);
        return 0;
}

static inline void
pio_irq_enable(struct goku_udc *dev,
                struct goku_udc_regs __iomem *regs, int epnum)
{
        dev->int_enable |= INT_EPxDATASET (epnum);
        writel(dev->int_enable, &regs->int_enable);
        /* write may still be posted */
}

static inline void
pio_irq_disable(struct goku_udc *dev,
                struct goku_udc_regs __iomem *regs, int epnum)
{
        dev->int_enable &= ~INT_EPxDATASET (epnum);
        writel(dev->int_enable, &regs->int_enable);
        /* write may still be posted */
}

static inline void
pio_advance(struct goku_ep *ep)
{
        struct goku_request     *req;

        if (unlikely(list_empty (&ep->queue)))
                return;
        req = list_entry(ep->queue.next, struct goku_request, queue);
        (ep->is_in ? write_fifo : read_fifo)(ep, req);
}


/*-------------------------------------------------------------------------*/

// return:  0 = q running, 1 = q stopped, negative = errno
static int start_dma(struct goku_ep *ep, struct goku_request *req)
{
        struct goku_udc_regs __iomem    *regs = ep->dev->regs;
        u32                             master;
        u32                             start = req->req.dma;
        u32                             end = start + req->req.length - 1;

        master = readl(&regs->dma_master) & MST_RW_BITS;

        /* re-init the bits affecting IN dma; careful with zlps */
        if (likely(ep->is_in)) {
                if (unlikely(master & MST_RD_ENA)) {
                        DBG (ep->dev, "start, IN active dma %03x!!\n",
                                master);
//                      return -EL2HLT;
                }
                writel(end, &regs->in_dma_end);
                writel(start, &regs->in_dma_start);

                master &= ~MST_R_BITS;
                if (unlikely(req->req.length == 0))
                        master = MST_RD_ENA | MST_RD_EOPB;
                else if ((req->req.length % ep->ep.maxpacket) != 0
                                        || req->req.zero)
                        master = MST_RD_ENA | MST_EOPB_ENA;
                else
                        master = MST_RD_ENA | MST_EOPB_DIS;

                ep->dev->int_enable |= INT_MSTRDEND;

        /* Goku DMA-OUT merges short packets, which plays poorly with
         * protocols where short packets mark the transfer boundaries.
         * The chip supports a nonstandard policy with INT_MSTWRTMOUT,
         * ending transfers after 3 SOFs; we don't turn it on.
         */
        } else {
                if (unlikely(master & MST_WR_ENA)) {
                        DBG (ep->dev, "start, OUT active dma %03x!!\n",
                                master);
//                      return -EL2HLT;
                }
                writel(end, &regs->out_dma_end);
                writel(start, &regs->out_dma_start);

                master &= ~MST_W_BITS;
                master |= MST_WR_ENA | MST_TIMEOUT_DIS;

                ep->dev->int_enable |= INT_MSTWREND|INT_MSTWRTMOUT;
        }

        writel(master, &regs->dma_master);
        writel(ep->dev->int_enable, &regs->int_enable);
        return 0;
}

static void dma_advance(struct goku_udc *dev, struct goku_ep *ep)
{
        struct goku_request             *req;
        struct goku_udc_regs __iomem    *regs = ep->dev->regs;
        u32                             master;

        master = readl(&regs->dma_master);

        if (unlikely(list_empty(&ep->queue))) {
stop:
                if (ep->is_in)
                        dev->int_enable &= ~INT_MSTRDEND;
                else
                        dev->int_enable &= ~(INT_MSTWREND|INT_MSTWRTMOUT);
                writel(dev->int_enable, &regs->int_enable);
                return;
        }
        req = list_entry(ep->queue.next, struct goku_request, queue);

        /* normal hw dma completion (not abort) */
        if (likely(ep->is_in)) {
                if (unlikely(master & MST_RD_ENA))
                        return;
                req->req.actual = readl(&regs->in_dma_current);
        } else {
                if (unlikely(master & MST_WR_ENA))
                        return;

                /* hardware merges short packets, and also hides packet
                 * overruns.  a partial packet MAY be in the fifo here.
                 */
                req->req.actual = readl(&regs->out_dma_current);
        }
        req->req.actual -= req->req.dma;
        req->req.actual++;

#ifdef USB_TRACE
        VDBG(dev, "done %s %s dma, %u/%u bytes, req %p\n",
                ep->ep.name, ep->is_in ? "IN" : "OUT",
                req->req.actual, req->req.length, req);
#endif
        done(ep, req, 0);
        if (list_empty(&ep->queue))
                goto stop;
        req = list_entry(ep->queue.next, struct goku_request, queue);
        (void) start_dma(ep, req);
}

static void abort_dma(struct goku_ep *ep, int status)
{
        struct goku_udc_regs __iomem    *regs = ep->dev->regs;
        struct goku_request             *req;
        u32                             curr, master;

        /* NAK future host requests, hoping the implicit delay lets the
         * dma engine finish reading (or writing) its latest packet and
         * empty the dma buffer (up to 16 bytes).
         *
         * This avoids needing to clean up a partial packet in the fifo;
         * we can't do that for IN without side effects to HALT and TOGGLE.
         */
        command(regs, COMMAND_FIFO_DISABLE, ep->num);
        req = list_entry(ep->queue.next, struct goku_request, queue);
        master = readl(&regs->dma_master) & MST_RW_BITS;

        /* FIXME using these resets isn't usably documented. this may
         * not work unless it's followed by disabling the endpoint.
         *
         * FIXME the OUT reset path doesn't even behave consistently.
         */
        if (ep->is_in) {
                if (unlikely((readl(&regs->dma_master) & MST_RD_ENA) == 0))
                        goto finished;
                curr = readl(&regs->in_dma_current);

                writel(curr, &regs->in_dma_end);
                writel(curr, &regs->in_dma_start);

                master &= ~MST_R_BITS;
                master |= MST_RD_RESET;
                writel(master, &regs->dma_master);

                if (readl(&regs->dma_master) & MST_RD_ENA)
                        DBG(ep->dev, "IN dma active after reset!\n");

        } else {
                if (unlikely((readl(&regs->dma_master) & MST_WR_ENA) == 0))
                        goto finished;
                curr = readl(&regs->out_dma_current);

                writel(curr, &regs->out_dma_end);
                writel(curr, &regs->out_dma_start);

                master &= ~MST_W_BITS;
                master |= MST_WR_RESET;
                writel(master, &regs->dma_master);

                if (readl(&regs->dma_master) & MST_WR_ENA)
                        DBG(ep->dev, "OUT dma active after reset!\n");
        }
        req->req.actual = (curr - req->req.dma) + 1;
        req->req.status = status;

        VDBG(ep->dev, "%s %s %s %d/%d\n", __func__, ep->ep.name,
                ep->is_in ? "IN" : "OUT",
                req->req.actual, req->req.length);

        command(regs, COMMAND_FIFO_ENABLE, ep->num);

        return;

finished:
        /* dma already completed; no abort needed */
        command(regs, COMMAND_FIFO_ENABLE, ep->num);
        req->req.actual = req->req.length;
        req->req.status = 0;
}

/*-------------------------------------------------------------------------*/

static int
goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
        struct goku_request     *req;
        struct goku_ep          *ep;
        struct goku_udc         *dev;
        unsigned long           flags;
        int                     status;

        /* always require a cpu-view buffer so pio works */
        req = container_of(_req, struct goku_request, req);
        if (unlikely(!_req || !_req->complete
                        || !_req->buf || !list_empty(&req->queue)))
                return -EINVAL;
        ep = container_of(_ep, struct goku_ep, ep);
        if (unlikely(!_ep || (!ep->ep.desc && ep->num != 0)))
                return -EINVAL;
        dev = ep->dev;
        if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
                return -ESHUTDOWN;

        /* can't touch registers when suspended */
        if (dev->ep0state == EP0_SUSPEND)
                return -EBUSY;

        /* set up dma mapping in case the caller didn't */
        if (ep->dma) {
                status = usb_gadget_map_request(&dev->gadget, &req->req,
                                ep->is_in);
                if (status)
                        return status;
        }

#ifdef USB_TRACE
        VDBG(dev, "%s queue req %p, len %u buf %p\n",
                        _ep->name, _req, _req->length, _req->buf);
#endif

        spin_lock_irqsave(&dev->lock, flags);

        _req->status = -EINPROGRESS;
        _req->actual = 0;

        /* for ep0 IN without premature status, zlp is required and
         * writing EOP starts the status stage (OUT).
         */
        if (unlikely(ep->num == 0 && ep->is_in))
                _req->zero = 1;

        /* kickstart this i/o queue? */
        status = 0;
        if (list_empty(&ep->queue) && likely(!ep->stopped)) {
                /* dma:  done after dma completion IRQ (or error)
                 * pio:  done after last fifo operation
                 */
                if (ep->dma)
                        status = start_dma(ep, req);
                else
                        status = (ep->is_in ? write_fifo : read_fifo)(ep, req);

                if (unlikely(status != 0)) {
                        if (status > 0)
                                status = 0;
                        req = NULL;
                }

        } /* else pio or dma irq handler advances the queue. */

        if (likely(req != NULL))
                list_add_tail(&req->queue, &ep->queue);

        if (likely(!list_empty(&ep->queue))
                        && likely(ep->num != 0)
                        && !ep->dma
                        && !(dev->int_enable & INT_EPxDATASET (ep->num)))
                pio_irq_enable(dev, dev->regs, ep->num);

        spin_unlock_irqrestore(&dev->lock, flags);

        /* pci writes may still be posted */
        return status;
}

/* dequeue ALL requests */
static void nuke(struct goku_ep *ep, int status)
{
        struct goku_request     *req;

        ep->stopped = 1;
        if (list_empty(&ep->queue))
                return;
        if (ep->dma)
                abort_dma(ep, status);
        while (!list_empty(&ep->queue)) {
                req = list_entry(ep->queue.next, struct goku_request, queue);
                done(ep, req, status);
        }
}

/* dequeue JUST ONE request */
static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
        struct goku_request     *req;
        struct goku_ep          *ep;
        struct goku_udc         *dev;
        unsigned long           flags;

        ep = container_of(_ep, struct goku_ep, ep);
        if (!_ep || !_req || (!ep->ep.desc && ep->num != 0))
                return -EINVAL;
        dev = ep->dev;
        if (!dev->driver)
                return -ESHUTDOWN;

        /* we can't touch (dma) registers when suspended */
        if (dev->ep0state == EP0_SUSPEND)
                return -EBUSY;

        VDBG(dev, "%s %s %s %s %p\n", __func__, _ep->name,
                ep->is_in ? "IN" : "OUT",
                ep->dma ? "dma" : "pio",
                _req);

        spin_lock_irqsave(&dev->lock, flags);

        /* make sure it's actually queued on this endpoint */
        list_for_each_entry (req, &ep->queue, queue) {
                if (&req->req == _req)
                        break;
        }
        if (&req->req != _req) {
                spin_unlock_irqrestore (&dev->lock, flags);
                return -EINVAL;
        }

        if (ep->dma && ep->queue.next == &req->queue && !ep->stopped) {
                abort_dma(ep, -ECONNRESET);
                done(ep, req, -ECONNRESET);
                dma_advance(dev, ep);
        } else if (!list_empty(&req->queue))
                done(ep, req, -ECONNRESET);
        else
                req = NULL;
        spin_unlock_irqrestore(&dev->lock, flags);

        return req ? 0 : -EOPNOTSUPP;
}

/*-------------------------------------------------------------------------*/

static void goku_clear_halt(struct goku_ep *ep)
{
        // assert (ep->num !=0)
        VDBG(ep->dev, "%s clear halt\n", ep->ep.name);
        command(ep->dev->regs, COMMAND_SETDATA0, ep->num);
        command(ep->dev->regs, COMMAND_STALL_CLEAR, ep->num);
        if (ep->stopped) {
                ep->stopped = 0;
                if (ep->dma) {
                        struct goku_request     *req;

                        if (list_empty(&ep->queue))
                                return;
                        req = list_entry(ep->queue.next, struct goku_request,
                                                queue);
                        (void) start_dma(ep, req);
                } else
                        pio_advance(ep);
        }
}

static int goku_set_halt(struct usb_ep *_ep, int value)
{
        struct goku_ep  *ep;
        unsigned long   flags;
        int             retval = 0;

        if (!_ep)
                return -ENODEV;
        ep = container_of (_ep, struct goku_ep, ep);

        if (ep->num == 0) {
                if (value) {
                        ep->dev->ep0state = EP0_STALL;
                        ep->dev->ep[0].stopped = 1;
                } else
                        return -EINVAL;

        /* don't change EPxSTATUS_EP_INVALID to READY */
        } else if (!ep->ep.desc) {
                DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
                return -EINVAL;
        }

        spin_lock_irqsave(&ep->dev->lock, flags);
        if (!list_empty(&ep->queue))
                retval = -EAGAIN;
        else if (ep->is_in && value
                        /* data in (either) packet buffer? */
                        && (readl(&ep->dev->regs->DataSet)
                                        & DATASET_AB(ep->num)))
                retval = -EAGAIN;
        else if (!value)
                goku_clear_halt(ep);
        else {
                ep->stopped = 1;
                VDBG(ep->dev, "%s set halt\n", ep->ep.name);
                command(ep->dev->regs, COMMAND_STALL, ep->num);
                readl(ep->reg_status);
        }
        spin_unlock_irqrestore(&ep->dev->lock, flags);
        return retval;
}

static int goku_fifo_status(struct usb_ep *_ep)
{
        struct goku_ep                  *ep;
        struct goku_udc_regs __iomem    *regs;
        u32                             size;

        if (!_ep)
                return -ENODEV;
        ep = container_of(_ep, struct goku_ep, ep);

        /* size is only reported sanely for OUT */
        if (ep->is_in)
                return -EOPNOTSUPP;

        /* ignores 16-byte dma buffer; SizeH == 0 */
        regs = ep->dev->regs;
        size = readl(&regs->EPxSizeLA[ep->num]) & DATASIZE;
        size += readl(&regs->EPxSizeLB[ep->num]) & DATASIZE;
        VDBG(ep->dev, "%s %s %u\n", __func__, ep->ep.name, size);
        return size;
}

static void goku_fifo_flush(struct usb_ep *_ep)
{
        struct goku_ep                  *ep;
        struct goku_udc_regs __iomem    *regs;
        u32                             size;

        if (!_ep)
                return;
        ep = container_of(_ep, struct goku_ep, ep);
        VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name);

        /* don't change EPxSTATUS_EP_INVALID to READY */
        if (!ep->ep.desc && ep->num != 0) {
                DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
                return;
        }

        regs = ep->dev->regs;
        size = readl(&regs->EPxSizeLA[ep->num]);
        size &= DATASIZE;

        /* Non-desirable behavior:  FIFO_CLEAR also clears the
         * endpoint halt feature.  For OUT, we _could_ just read
         * the bytes out (PIO, if !ep->dma); for in, no choice.
         */
        if (size)
                command(regs, COMMAND_FIFO_CLEAR, ep->num);
}

static struct usb_ep_ops goku_ep_ops = {
        .enable         = goku_ep_enable,
        .disable        = goku_ep_disable,

        .alloc_request  = goku_alloc_request,
        .free_request   = goku_free_request,

        .queue          = goku_queue,
        .dequeue        = goku_dequeue,

        .set_halt       = goku_set_halt,
        .fifo_status    = goku_fifo_status,
        .fifo_flush     = goku_fifo_flush,
};

/*-------------------------------------------------------------------------*/

static int goku_get_frame(struct usb_gadget *_gadget)
{
        return -EOPNOTSUPP;
}

static struct usb_ep *goku_match_ep(struct usb_gadget *g,
                struct usb_endpoint_descriptor *desc,
                struct usb_ss_ep_comp_descriptor *ep_comp)
{
        struct goku_udc *dev = to_goku_udc(g);
        struct usb_ep *ep;

        switch (usb_endpoint_type(desc)) {

        case USB_ENDPOINT_XFER_INT:
                /* single buffering is enough */
                ep = &dev->ep[3].ep;
                if (usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
                        return ep;
                break;
        case USB_ENDPOINT_XFER_BULK:
                if (usb_endpoint_dir_in(desc)) {
                        /* DMA may be available */
                        ep = &dev->ep[2].ep;
                        if (usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
                                return ep;
                }
                break;
        default:
                /* nothing */ ;
        }

        return NULL;
}

static int goku_udc_start(struct usb_gadget *g,
                struct usb_gadget_driver *driver);
static int goku_udc_stop(struct usb_gadget *g);

static const struct usb_gadget_ops goku_ops = {
        .get_frame      = goku_get_frame,
        .udc_start      = goku_udc_start,
        .udc_stop       = goku_udc_stop,
        .match_ep       = goku_match_ep,
        // no remote wakeup
        // not selfpowered
};

/*-------------------------------------------------------------------------*/

static inline const char *dmastr(void)
{
        if (use_dma == 0)
                return "(dma disabled)";
        else if (use_dma == 2)
                return "(dma IN and OUT)";
        else
                return "(dma IN)";
}

#ifdef CONFIG_USB_GADGET_DEBUG_FILES

static const char proc_node_name [] = "driver/udc";

#define FOURBITS "%s%s%s%s"
#define EIGHTBITS FOURBITS FOURBITS

static void dump_intmask(struct seq_file *m, const char *label, u32 mask)
{
        /* int_status is the same format ... */
        seq_printf(m, "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
                   label, mask,
                   (mask & INT_PWRDETECT) ? " power" : "",
                   (mask & INT_SYSERROR) ? " sys" : "",
                   (mask & INT_MSTRDEND) ? " in-dma" : "",
                   (mask & INT_MSTWRTMOUT) ? " wrtmo" : "",

                   (mask & INT_MSTWREND) ? " out-dma" : "",
                   (mask & INT_MSTWRSET) ? " wrset" : "",
                   (mask & INT_ERR) ? " err" : "",
                   (mask & INT_SOF) ? " sof" : "",

                   (mask & INT_EP3NAK) ? " ep3nak" : "",
                   (mask & INT_EP2NAK) ? " ep2nak" : "",
                   (mask & INT_EP1NAK) ? " ep1nak" : "",
                   (mask & INT_EP3DATASET) ? " ep3" : "",

                   (mask & INT_EP2DATASET) ? " ep2" : "",
                   (mask & INT_EP1DATASET) ? " ep1" : "",
                   (mask & INT_STATUSNAK) ? " ep0snak" : "",
                   (mask & INT_STATUS) ? " ep0status" : "",

                   (mask & INT_SETUP) ? " setup" : "",
                   (mask & INT_ENDPOINT0) ? " ep0" : "",
                   (mask & INT_USBRESET) ? " reset" : "",
                   (mask & INT_SUSPEND) ? " suspend" : "");
}

static const char *udc_ep_state(enum ep0state state)
{
        switch (state) {
        case EP0_DISCONNECT:
                return "ep0_disconnect";
        case EP0_IDLE:
                return "ep0_idle";
        case EP0_IN:
                return "ep0_in";
        case EP0_OUT:
                return "ep0_out";
        case EP0_STATUS:
                return "ep0_status";
        case EP0_STALL:
                return "ep0_stall";
        case EP0_SUSPEND:
                return "ep0_suspend";
        }

        return "ep0_?";
}

static const char *udc_ep_status(u32 status)
{
        switch (status & EPxSTATUS_EP_MASK) {
        case EPxSTATUS_EP_READY:
                return "ready";
        case EPxSTATUS_EP_DATAIN:
                return "packet";
        case EPxSTATUS_EP_FULL:
                return "full";
        case EPxSTATUS_EP_TX_ERR:       /* host will retry */
                return "tx_err";
        case EPxSTATUS_EP_RX_ERR:
                return "rx_err";
        case EPxSTATUS_EP_BUSY:         /* ep0 only */
                return "busy";
        case EPxSTATUS_EP_STALL:
                return "stall";
        case EPxSTATUS_EP_INVALID:      /* these "can't happen" */
                return "invalid";
        }

        return "?";
}

static int udc_proc_read(struct seq_file *m, void *v)
{
        struct goku_udc                 *dev = m->private;
        struct goku_udc_regs __iomem    *regs = dev->regs;
        unsigned long                   flags;
        int                             i, is_usb_connected;
        u32                             tmp;

        local_irq_save(flags);

        /* basic device status */
        tmp = readl(&regs->power_detect);
        is_usb_connected = tmp & PW_DETECT;
        seq_printf(m,
                   "%s - %s\n"
                   "%s version: %s %s\n"
                   "Gadget driver: %s\n"
                   "Host %s, %s\n"
                   "\n",
                   pci_name(dev->pdev), driver_desc,
                   driver_name, DRIVER_VERSION, dmastr(),
                   dev->driver ? dev->driver->driver.name : "(none)",
                   is_usb_connected
                           ? ((tmp & PW_PULLUP) ? "full speed" : "powered")
                           : "disconnected",
                   udc_ep_state(dev->ep0state));

        dump_intmask(m, "int_status", readl(&regs->int_status));
        dump_intmask(m, "int_enable", readl(&regs->int_enable));

        if (!is_usb_connected || !dev->driver || (tmp & PW_PULLUP) == 0)
                goto done;

        /* registers for (active) device and ep0 */
        seq_printf(m, "\nirqs %lu\ndataset %02x single.bcs %02x.%02x state %x addr %u\n",
                   dev->irqs, readl(&regs->DataSet),
                   readl(&regs->EPxSingle), readl(&regs->EPxBCS),
                   readl(&regs->UsbState),
                   readl(&regs->address));
        if (seq_has_overflowed(m))
                goto done;

        tmp = readl(&regs->dma_master);
        seq_printf(m, "dma %03X =" EIGHTBITS "%s %s\n",
                   tmp,
                   (tmp & MST_EOPB_DIS) ? " eopb-" : "",
                   (tmp & MST_EOPB_ENA) ? " eopb+" : "",
                   (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
                   (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",

                   (tmp & MST_RD_EOPB) ? " eopb" : "",
                   (tmp & MST_RD_RESET) ? " in_reset" : "",
                   (tmp & MST_WR_RESET) ? " out_reset" : "",
                   (tmp & MST_RD_ENA) ? " IN" : "",

                   (tmp & MST_WR_ENA) ? " OUT" : "",
                   (tmp & MST_CONNECTION) ? "ep1in/ep2out" : "ep1out/ep2in");
        if (seq_has_overflowed(m))
                goto done;

        /* dump endpoint queues */
        for (i = 0; i < 4; i++) {
                struct goku_ep          *ep = &dev->ep [i];
                struct goku_request     *req;

                if (i && !ep->ep.desc)
                        continue;

                tmp = readl(ep->reg_status);
                seq_printf(m, "%s %s max %u %s, irqs %lu, status %02x (%s) " FOURBITS "\n",
                           ep->ep.name,
                           ep->is_in ? "in" : "out",
                           ep->ep.maxpacket,
                           ep->dma ? "dma" : "pio",
                           ep->irqs,
                           tmp, udc_ep_status(tmp),
                           (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
                           (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
                           (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
                           (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : "");
                if (seq_has_overflowed(m))
                        goto done;

                if (list_empty(&ep->queue)) {
                        seq_puts(m, "\t(nothing queued)\n");
                        if (seq_has_overflowed(m))
                                goto done;
                        continue;
                }
                list_for_each_entry(req, &ep->queue, queue) {
                        if (ep->dma && req->queue.prev == &ep->queue) {
                                if (i == UDC_MSTRD_ENDPOINT)
                                        tmp = readl(&regs->in_dma_current);
                                else
                                        tmp = readl(&regs->out_dma_current);
                                tmp -= req->req.dma;
                                tmp++;
                        } else
                                tmp = req->req.actual;

                        seq_printf(m, "\treq %p len %u/%u buf %p\n",
                                   &req->req, tmp, req->req.length,
                                   req->req.buf);
                        if (seq_has_overflowed(m))
                                goto done;
                }
        }

done:
        local_irq_restore(flags);
        return 0;
}

/*
 * seq_file wrappers for procfile show routines.
 */
static int udc_proc_open(struct inode *inode, struct file *file)
{
        return single_open(file, udc_proc_read, PDE_DATA(file_inode(file)));
}

static const struct file_operations udc_proc_fops = {
        .open           = udc_proc_open,
        .read           = seq_read,
        .llseek         = seq_lseek,
        .release        = single_release,
};

#endif  /* CONFIG_USB_GADGET_DEBUG_FILES */

/*-------------------------------------------------------------------------*/

static void udc_reinit (struct goku_udc *dev)
{
        static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" };

        unsigned i;

        INIT_LIST_HEAD (&dev->gadget.ep_list);
        dev->gadget.ep0 = &dev->ep [0].ep;
        dev->gadget.speed = USB_SPEED_UNKNOWN;
        dev->ep0state = EP0_DISCONNECT;
        dev->irqs = 0;

        for (i = 0; i < 4; i++) {
                struct goku_ep  *ep = &dev->ep[i];

                ep->num = i;
                ep->ep.name = names[i];
                ep->reg_fifo = &dev->regs->ep_fifo [i];
                ep->reg_status = &dev->regs->ep_status [i];
                ep->reg_mode = &dev->regs->ep_mode[i];

                ep->ep.ops = &goku_ep_ops;
                list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
                ep->dev = dev;
                INIT_LIST_HEAD (&ep->queue);

                ep_reset(NULL, ep);

                if (i == 0)
                        ep->ep.caps.type_control = true;
                else
                        ep->ep.caps.type_bulk = true;

                ep->ep.caps.dir_in = true;
                ep->ep.caps.dir_out = true;
        }

        dev->ep[0].reg_mode = NULL;
        usb_ep_set_maxpacket_limit(&dev->ep[0].ep, MAX_EP0_SIZE);
        list_del_init (&dev->ep[0].ep.ep_list);
}

static void udc_reset(struct goku_udc *dev)
{
        struct goku_udc_regs __iomem    *regs = dev->regs;

        writel(0, &regs->power_detect);
        writel(0, &regs->int_enable);
        readl(&regs->int_enable);
        dev->int_enable = 0;

        /* deassert reset, leave USB D+ at hi-Z (no pullup)
         * don't let INT_PWRDETECT sequence begin
         */
        udelay(250);
        writel(PW_RESETB, &regs->power_detect);
        readl(&regs->int_enable);
}

static void ep0_start(struct goku_udc *dev)
{
        struct goku_udc_regs __iomem    *regs = dev->regs;
        unsigned                        i;

        VDBG(dev, "%s\n", __func__);

        udc_reset(dev);
        udc_reinit (dev);
        //writel(MST_EOPB_ENA | MST_TIMEOUT_ENA, &regs->dma_master);

        /* hw handles set_address, set_feature, get_status; maybe more */
        writel(   G_REQMODE_SET_INTF | G_REQMODE_GET_INTF
                | G_REQMODE_SET_CONF | G_REQMODE_GET_CONF
                | G_REQMODE_GET_DESC
                | G_REQMODE_CLEAR_FEAT
                , &regs->reqmode);

        for (i = 0; i < 4; i++)
                dev->ep[i].irqs = 0;

        /* can't modify descriptors after writing UsbReady */
        for (i = 0; i < DESC_LEN; i++)
                writel(0, &regs->descriptors[i]);
        writel(0, &regs->UsbReady);

        /* expect ep0 requests when the host drops reset */
        writel(PW_RESETB | PW_PULLUP, &regs->power_detect);
        dev->int_enable = INT_DEVWIDE | INT_EP0;
        writel(dev->int_enable, &dev->regs->int_enable);
        readl(&regs->int_enable);
        dev->gadget.speed = USB_SPEED_FULL;
        dev->ep0state = EP0_IDLE;
}

static void udc_enable(struct goku_udc *dev)
{
        /* start enumeration now, or after power detect irq */
        if (readl(&dev->regs->power_detect) & PW_DETECT)
                ep0_start(dev);
        else {
                DBG(dev, "%s\n", __func__);
                dev->int_enable = INT_PWRDETECT;
                writel(dev->int_enable, &dev->regs->int_enable);
        }
}

/*-------------------------------------------------------------------------*/

/* keeping it simple:
 * - one bus driver, initted first;
 * - one function driver, initted second
 */

/* when a driver is successfully registered, it will receive
 * control requests including set_configuration(), which enables
 * non-control requests.  then usb traffic follows until a
 * disconnect is reported.  then a host may connect again, or
 * the driver might get unbound.
 */
static int goku_udc_start(struct usb_gadget *g,
                struct usb_gadget_driver *driver)
{
        struct goku_udc *dev = to_goku_udc(g);

        /* hook up the driver */
        driver->driver.bus = NULL;
        dev->driver = driver;

        /*
         * then enable host detection and ep0; and we're ready
         * for set_configuration as well as eventual disconnect.
         */
        udc_enable(dev);

        return 0;
}

static void stop_activity(struct goku_udc *dev)
{
        unsigned        i;

        DBG (dev, "%s\n", __func__);

        /* disconnect gadget driver after quiesceing hw and the driver */
        udc_reset (dev);
        for (i = 0; i < 4; i++)
                nuke(&dev->ep [i], -ESHUTDOWN);

        if (dev->driver)
                udc_enable(dev);
}

static int goku_udc_stop(struct usb_gadget *g)
{
        struct goku_udc *dev = to_goku_udc(g);
        unsigned long   flags;

        spin_lock_irqsave(&dev->lock, flags);
        dev->driver = NULL;
        stop_activity(dev);
        spin_unlock_irqrestore(&dev->lock, flags);

        return 0;
}

/*-------------------------------------------------------------------------*/

static void ep0_setup(struct goku_udc *dev)
{
        struct goku_udc_regs __iomem    *regs = dev->regs;
        struct usb_ctrlrequest          ctrl;
        int                             tmp;

        /* read SETUP packet and enter DATA stage */
        ctrl.bRequestType = readl(&regs->bRequestType);
        ctrl.bRequest = readl(&regs->bRequest);
        ctrl.wValue  = cpu_to_le16((readl(&regs->wValueH)  << 8)
                                        | readl(&regs->wValueL));
        ctrl.wIndex  = cpu_to_le16((readl(&regs->wIndexH)  << 8)
                                        | readl(&regs->wIndexL));
        ctrl.wLength = cpu_to_le16((readl(&regs->wLengthH) << 8)
                                        | readl(&regs->wLengthL));
        writel(0, &regs->SetupRecv);

        nuke(&dev->ep[0], 0);
        dev->ep[0].stopped = 0;
        if (likely(ctrl.bRequestType & USB_DIR_IN)) {
                dev->ep[0].is_in = 1;
                dev->ep0state = EP0_IN;
                /* detect early status stages */
                writel(ICONTROL_STATUSNAK, &dev->regs->IntControl);
        } else {
                dev->ep[0].is_in = 0;
                dev->ep0state = EP0_OUT;

                /* NOTE:  CLEAR_FEATURE is done in software so that we can
                 * synchronize transfer restarts after bulk IN stalls.  data
                 * won't even enter the fifo until the halt is cleared.
                 */
                switch (ctrl.bRequest) {
                case USB_REQ_CLEAR_FEATURE:
                        switch (ctrl.bRequestType) {
                        case USB_RECIP_ENDPOINT:
                                tmp = le16_to_cpu(ctrl.wIndex) & 0x0f;
                                /* active endpoint */
                                if (tmp > 3 ||
                                    (!dev->ep[tmp].ep.desc && tmp != 0))
                                        goto stall;
                                if (ctrl.wIndex & cpu_to_le16(
                                                USB_DIR_IN)) {
                                        if (!dev->ep[tmp].is_in)
                                                goto stall;
                                } else {
                                        if (dev->ep[tmp].is_in)
                                                goto stall;
                                }
                                if (ctrl.wValue != cpu_to_le16(
                                                USB_ENDPOINT_HALT))
                                        goto stall;
                                if (tmp)
                                        goku_clear_halt(&dev->ep[tmp]);
succeed:
                                /* start ep0out status stage */
                                writel(~(1<<0), &regs->EOP);
                                dev->ep[0].stopped = 1;
                                dev->ep0state = EP0_STATUS;
                                return;
                        case USB_RECIP_DEVICE:
                                /* device remote wakeup: always clear */
                                if (ctrl.wValue != cpu_to_le16(1))
                                        goto stall;
                                VDBG(dev, "clear dev remote wakeup\n");
                                goto succeed;
                        case USB_RECIP_INTERFACE:
                                goto stall;
                        default:                /* pass to gadget driver */
                                break;
                        }
                        break;
                default:
                        break;
                }
        }

#ifdef USB_TRACE
        VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
                ctrl.bRequestType, ctrl.bRequest,
                le16_to_cpu(ctrl.wValue), le16_to_cpu(ctrl.wIndex),
                le16_to_cpu(ctrl.wLength));
#endif

        /* hw wants to know when we're configured (or not) */
        dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION
                                && ctrl.bRequestType == USB_RECIP_DEVICE);
        if (unlikely(dev->req_config))
                dev->configured = (ctrl.wValue != cpu_to_le16(0));

        /* delegate everything to the gadget driver.
         * it may respond after this irq handler returns.
         */
        spin_unlock (&dev->lock);
        tmp = dev->driver->setup(&dev->gadget, &ctrl);
        spin_lock (&dev->lock);
        if (unlikely(tmp < 0)) {
stall:
#ifdef USB_TRACE
                VDBG(dev, "req %02x.%02x protocol STALL; err %d\n",
                                ctrl.bRequestType, ctrl.bRequest, tmp);
#endif
                command(regs, COMMAND_STALL, 0);
                dev->ep[0].stopped = 1;
                dev->ep0state = EP0_STALL;
        }

        /* expect at least one data or status stage irq */
}

#define ACK(irqbit) { \
                stat &= ~irqbit; \
                writel(~irqbit, &regs->int_status); \
                handled = 1; \
                }

static irqreturn_t goku_irq(int irq, void *_dev)
{
        struct goku_udc                 *dev = _dev;
        struct goku_udc_regs __iomem    *regs = dev->regs;
        struct goku_ep                  *ep;
        u32                             stat, handled = 0;
        unsigned                        i, rescans = 5;

        spin_lock(&dev->lock);

rescan:
        stat = readl(&regs->int_status) & dev->int_enable;
        if (!stat)
                goto done;
        dev->irqs++;

        /* device-wide irqs */
        if (unlikely(stat & INT_DEVWIDE)) {
                if (stat & INT_SYSERROR) {
                        ERROR(dev, "system error\n");
                        stop_activity(dev);
                        stat = 0;
                        handled = 1;
                        // FIXME have a neater way to prevent re-enumeration
                        dev->driver = NULL;
                        goto done;
                }
                if (stat & INT_PWRDETECT) {
                        writel(~stat, &regs->int_status);
                        if (readl(&dev->regs->power_detect) & PW_DETECT) {
                                VDBG(dev, "connect\n");
                                ep0_start(dev);
                        } else {
                                DBG(dev, "disconnect\n");
                                if (dev->gadget.speed == USB_SPEED_FULL)
                                        stop_activity(dev);
                                dev->ep0state = EP0_DISCONNECT;
                                dev->int_enable = INT_DEVWIDE;
                                writel(dev->int_enable, &dev->regs->int_enable);
                        }
                        stat = 0;
                        handled = 1;
                        goto done;
                }
                if (stat & INT_SUSPEND) {
                        ACK(INT_SUSPEND);
                        if (readl(&regs->ep_status[0]) & EPxSTATUS_SUSPEND) {
                                switch (dev->ep0state) {
                                case EP0_DISCONNECT:
                                case EP0_SUSPEND:
                                        goto pm_next;
                                default:
                                        break;
                                }
                                DBG(dev, "USB suspend\n");
                                dev->ep0state = EP0_SUSPEND;
                                if (dev->gadget.speed != USB_SPEED_UNKNOWN
                                                && dev->driver
                                                && dev->driver->suspend) {
                                        spin_unlock(&dev->lock);
                                        dev->driver->suspend(&dev->gadget);
                                        spin_lock(&dev->lock);
                                }
                        } else {
                                if (dev->ep0state != EP0_SUSPEND) {
                                        DBG(dev, "bogus USB resume %d\n",
                                                dev->ep0state);
                                        goto pm_next;
                                }
                                DBG(dev, "USB resume\n");
                                dev->ep0state = EP0_IDLE;
                                if (dev->gadget.speed != USB_SPEED_UNKNOWN
                                                && dev->driver
                                                && dev->driver->resume) {
                                        spin_unlock(&dev->lock);
                                        dev->driver->resume(&dev->gadget);
                                        spin_lock(&dev->lock);
                                }
                        }
                }
pm_next:
                if (stat & INT_USBRESET) {              /* hub reset done */
                        ACK(INT_USBRESET);
                        INFO(dev, "USB reset done, gadget %s\n",
                                dev->driver->driver.name);
                }
                // and INT_ERR on some endpoint's crc/bitstuff/... problem
        }

        /* progress ep0 setup, data, or status stages.
         * no transition {EP0_STATUS, EP0_STALL} --> EP0_IDLE; saves irqs
         */
        if (stat & INT_SETUP) {
                ACK(INT_SETUP);
                dev->ep[0].irqs++;
                ep0_setup(dev);
        }
        if (stat & INT_STATUSNAK) {
                ACK(INT_STATUSNAK|INT_ENDPOINT0);
                if (dev->ep0state == EP0_IN) {
                        ep = &dev->ep[0];
                        ep->irqs++;
                        nuke(ep, 0);
                        writel(~(1<<0), &regs->EOP);
                        dev->ep0state = EP0_STATUS;
                }
        }
        if (stat & INT_ENDPOINT0) {
                ACK(INT_ENDPOINT0);
                ep = &dev->ep[0];
                ep->irqs++;
                pio_advance(ep);
        }

        /* dma completion */
        if (stat & INT_MSTRDEND) {      /* IN */
                ACK(INT_MSTRDEND);
                ep = &dev->ep[UDC_MSTRD_ENDPOINT];
                ep->irqs++;
                dma_advance(dev, ep);
        }
        if (stat & INT_MSTWREND) {      /* OUT */
                ACK(INT_MSTWREND);
                ep = &dev->ep[UDC_MSTWR_ENDPOINT];
                ep->irqs++;
                dma_advance(dev, ep);
        }
        if (stat & INT_MSTWRTMOUT) {    /* OUT */
                ACK(INT_MSTWRTMOUT);
                ep = &dev->ep[UDC_MSTWR_ENDPOINT];
                ep->irqs++;
                ERROR(dev, "%s write timeout ?\n", ep->ep.name);
                // reset dma? then dma_advance()
        }

        /* pio */
        for (i = 1; i < 4; i++) {
                u32             tmp = INT_EPxDATASET(i);

                if (!(stat & tmp))
                        continue;
                ep = &dev->ep[i];
                pio_advance(ep);
                if (list_empty (&ep->queue))
                        pio_irq_disable(dev, regs, i);
                stat &= ~tmp;
                handled = 1;
                ep->irqs++;
        }

        if (rescans--)
                goto rescan;

done:
        (void)readl(&regs->int_enable);
        spin_unlock(&dev->lock);
        if (stat)
                DBG(dev, "unhandled irq status: %05x (%05x, %05x)\n", stat,
                                readl(&regs->int_status), dev->int_enable);
        return IRQ_RETVAL(handled);
}

#undef ACK

/*-------------------------------------------------------------------------*/

static void gadget_release(struct device *_dev)
{
        struct goku_udc *dev = dev_get_drvdata(_dev);

        kfree(dev);
}

/* tear down the binding between this driver and the pci device */

static void goku_remove(struct pci_dev *pdev)
{
        struct goku_udc         *dev = pci_get_drvdata(pdev);

        DBG(dev, "%s\n", __func__);

        usb_del_gadget_udc(&dev->gadget);

        BUG_ON(dev->driver);

#ifdef CONFIG_USB_GADGET_DEBUG_FILES
        remove_proc_entry(proc_node_name, NULL);
#endif
        if (dev->regs)
                udc_reset(dev);
        if (dev->got_irq)
                free_irq(pdev->irq, dev);
        if (dev->regs)
                iounmap(dev->regs);
        if (dev->got_region)
                release_mem_region(pci_resource_start (pdev, 0),
                                pci_resource_len (pdev, 0));
        if (dev->enabled)
                pci_disable_device(pdev);

        dev->regs = NULL;

        INFO(dev, "unbind\n");
}

/* wrap this driver around the specified pci device, but
 * don't respond over USB until a gadget driver binds to us.
 */

static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
        struct goku_udc         *dev = NULL;
        unsigned long           resource, len;
        void __iomem            *base = NULL;
        int                     retval;

        if (!pdev->irq) {
                printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev));
                retval = -ENODEV;
                goto err;
        }

        /* alloc, and start init */
        dev = kzalloc (sizeof *dev, GFP_KERNEL);
        if (dev == NULL){
                pr_debug("enomem %s\n", pci_name(pdev));
                retval = -ENOMEM;
                goto err;
        }

        spin_lock_init(&dev->lock);
        dev->pdev = pdev;
        dev->gadget.ops = &goku_ops;
        dev->gadget.max_speed = USB_SPEED_FULL;

        /* the "gadget" abstracts/virtualizes the controller */
        dev->gadget.name = driver_name;

        /* now all the pci goodies ... */
        retval = pci_enable_device(pdev);
        if (retval < 0) {
                DBG(dev, "can't enable, %d\n", retval);
                goto err;
        }
        dev->enabled = 1;

        resource = pci_resource_start(pdev, 0);
        len = pci_resource_len(pdev, 0);
        if (!request_mem_region(resource, len, driver_name)) {
                DBG(dev, "controller already in use\n");
                retval = -EBUSY;
                goto err;
        }
        dev->got_region = 1;

        base = ioremap_nocache(resource, len);
        if (base == NULL) {
                DBG(dev, "can't map memory\n");
                retval = -EFAULT;
                goto err;
        }
        dev->regs = (struct goku_udc_regs __iomem *) base;

        pci_set_drvdata(pdev, dev);
        INFO(dev, "%s\n", driver_desc);
        INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr());
        INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);

        /* init to known state, then setup irqs */
        udc_reset(dev);
        udc_reinit (dev);
        if (request_irq(pdev->irq, goku_irq, IRQF_SHARED,
                        driver_name, dev) != 0) {
                DBG(dev, "request interrupt %d failed\n", pdev->irq);
                retval = -EBUSY;
                goto err;
        }
        dev->got_irq = 1;
        if (use_dma)
                pci_set_master(pdev);


#ifdef CONFIG_USB_GADGET_DEBUG_FILES
        proc_create_data(proc_node_name, 0, NULL, &udc_proc_fops, dev);
#endif

        retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget,
                        gadget_release);
        if (retval)
                goto err;

        return 0;

err:
        if (dev)
                goku_remove (pdev);
        return retval;
}


/*-------------------------------------------------------------------------*/

static const struct pci_device_id pci_ids[] = { {
        .class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
        .class_mask =   ~0,
        .vendor =       0x102f,         /* Toshiba */
        .device =       0x0107,         /* this UDC */
        .subvendor =    PCI_ANY_ID,
        .subdevice =    PCI_ANY_ID,

}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE (pci, pci_ids);

static struct pci_driver goku_pci_driver = {
        .name =         (char *) driver_name,
        .id_table =     pci_ids,

        .probe =        goku_probe,
        .remove =       goku_remove,

        /* FIXME add power management support */
};

module_pci_driver(goku_pci_driver);