linux/drivers/usb/host/bcma-hcd.c
<<
>>
Prefs
   1/*
   2 * Broadcom specific Advanced Microcontroller Bus
   3 * Broadcom USB-core driver (BCMA bus glue)
   4 *
   5 * Copyright 2011-2015 Hauke Mehrtens <hauke@hauke-m.de>
   6 * Copyright 2015 Felix Fietkau <nbd@openwrt.org>
   7 *
   8 * Based on ssb-ohci driver
   9 * Copyright 2007 Michael Buesch <m@bues.ch>
  10 *
  11 * Derived from the OHCI-PCI driver
  12 * Copyright 1999 Roman Weissgaerber
  13 * Copyright 2000-2002 David Brownell
  14 * Copyright 1999 Linus Torvalds
  15 * Copyright 1999 Gregory P. Smith
  16 *
  17 * Derived from the USBcore related parts of Broadcom-SB
  18 * Copyright 2005-2011 Broadcom Corporation
  19 *
  20 * Licensed under the GNU/GPL. See COPYING for details.
  21 */
  22#include <linux/bcma/bcma.h>
  23#include <linux/delay.h>
  24#include <linux/platform_device.h>
  25#include <linux/module.h>
  26#include <linux/slab.h>
  27#include <linux/of.h>
  28#include <linux/of_gpio.h>
  29#include <linux/usb/ehci_pdriver.h>
  30#include <linux/usb/ohci_pdriver.h>
  31
  32MODULE_AUTHOR("Hauke Mehrtens");
  33MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
  34MODULE_LICENSE("GPL");
  35
  36struct bcma_hcd_device {
  37        struct platform_device *ehci_dev;
  38        struct platform_device *ohci_dev;
  39};
  40
  41/* Wait for bitmask in a register to get set or cleared.
  42 * timeout is in units of ten-microseconds.
  43 */
  44static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
  45                          int timeout)
  46{
  47        int i;
  48        u32 val;
  49
  50        for (i = 0; i < timeout; i++) {
  51                val = bcma_read32(dev, reg);
  52                if ((val & bitmask) == bitmask)
  53                        return 0;
  54                udelay(10);
  55        }
  56
  57        return -ETIMEDOUT;
  58}
  59
  60static void bcma_hcd_4716wa(struct bcma_device *dev)
  61{
  62#ifdef CONFIG_BCMA_DRIVER_MIPS
  63        /* Work around for 4716 failures. */
  64        if (dev->bus->chipinfo.id == 0x4716) {
  65                u32 tmp;
  66
  67                tmp = bcma_cpu_clock(&dev->bus->drv_mips);
  68                if (tmp >= 480000000)
  69                        tmp = 0x1846b; /* set CDR to 0x11(fast) */
  70                else if (tmp == 453000000)
  71                        tmp = 0x1046b; /* set CDR to 0x10(slow) */
  72                else
  73                        tmp = 0;
  74
  75                /* Change Shim mdio control reg to fix host not acking at
  76                 * high frequencies
  77                 */
  78                if (tmp) {
  79                        bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
  80                        udelay(500);
  81
  82                        bcma_write32(dev, 0x524, tmp);
  83                        udelay(500);
  84                        bcma_write32(dev, 0x524, 0x4ab);
  85                        udelay(500);
  86                        bcma_read32(dev, 0x528);
  87                        bcma_write32(dev, 0x528, 0x80000000);
  88                }
  89        }
  90#endif /* CONFIG_BCMA_DRIVER_MIPS */
  91}
  92
  93/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
  94static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
  95{
  96        u32 tmp;
  97
  98        /*
  99         * USB 2.0 special considerations:
 100         *
 101         * 1. Since the core supports both OHCI and EHCI functions, it must
 102         *    only be reset once.
 103         *
 104         * 2. In addition to the standard SI reset sequence, the Host Control
 105         *    Register must be programmed to bring the USB core and various
 106         *    phy components out of reset.
 107         */
 108        if (!bcma_core_is_enabled(dev)) {
 109                bcma_core_enable(dev, 0);
 110                mdelay(10);
 111                if (dev->id.rev >= 5) {
 112                        /* Enable Misc PLL */
 113                        tmp = bcma_read32(dev, 0x1e0);
 114                        tmp |= 0x100;
 115                        bcma_write32(dev, 0x1e0, tmp);
 116                        if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
 117                                printk(KERN_EMERG "Failed to enable misc PPL!\n");
 118
 119                        /* Take out of resets */
 120                        bcma_write32(dev, 0x200, 0x4ff);
 121                        udelay(25);
 122                        bcma_write32(dev, 0x200, 0x6ff);
 123                        udelay(25);
 124
 125                        /* Make sure digital and AFE are locked in USB PHY */
 126                        bcma_write32(dev, 0x524, 0x6b);
 127                        udelay(50);
 128                        tmp = bcma_read32(dev, 0x524);
 129                        udelay(50);
 130                        bcma_write32(dev, 0x524, 0xab);
 131                        udelay(50);
 132                        tmp = bcma_read32(dev, 0x524);
 133                        udelay(50);
 134                        bcma_write32(dev, 0x524, 0x2b);
 135                        udelay(50);
 136                        tmp = bcma_read32(dev, 0x524);
 137                        udelay(50);
 138                        bcma_write32(dev, 0x524, 0x10ab);
 139                        udelay(50);
 140                        tmp = bcma_read32(dev, 0x524);
 141
 142                        if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
 143                                tmp = bcma_read32(dev, 0x528);
 144                                printk(KERN_EMERG
 145                                       "USB20H mdio_rddata 0x%08x\n", tmp);
 146                        }
 147                        bcma_write32(dev, 0x528, 0x80000000);
 148                        tmp = bcma_read32(dev, 0x314);
 149                        udelay(265);
 150                        bcma_write32(dev, 0x200, 0x7ff);
 151                        udelay(10);
 152
 153                        /* Take USB and HSIC out of non-driving modes */
 154                        bcma_write32(dev, 0x510, 0);
 155                } else {
 156                        bcma_write32(dev, 0x200, 0x7ff);
 157
 158                        udelay(1);
 159                }
 160
 161                bcma_hcd_4716wa(dev);
 162        }
 163}
 164
 165static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
 166{
 167        struct bcma_device *arm_core;
 168        void __iomem *dmu;
 169
 170        arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
 171        if (!arm_core) {
 172                dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n");
 173                return;
 174        }
 175
 176        dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
 177        if (!dmu) {
 178                dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n");
 179                return;
 180        }
 181
 182        /* Unlock DMU PLL settings */
 183        iowrite32(0x0000ea68, dmu + 0x180);
 184
 185        /* Write USB 2.0 PLL control setting */
 186        iowrite32(0x00dd10c3, dmu + 0x164);
 187
 188        /* Lock DMU PLL settings */
 189        iowrite32(0x00000000, dmu + 0x180);
 190
 191        iounmap(dmu);
 192}
 193
 194static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev)
 195{
 196        u32 val;
 197
 198        /*
 199         * Delay after PHY initialized to ensure HC is ready to be configured
 200         */
 201        usleep_range(1000, 2000);
 202
 203        /* Set packet buffer OUT threshold */
 204        val = bcma_read32(dev, 0x94);
 205        val &= 0xffff;
 206        val |= 0x80 << 16;
 207        bcma_write32(dev, 0x94, val);
 208
 209        /* Enable break memory transfer */
 210        val = bcma_read32(dev, 0x9c);
 211        val |= 1;
 212        bcma_write32(dev, 0x9c, val);
 213}
 214
 215static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
 216{
 217        bcma_core_enable(dev, 0);
 218
 219        if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
 220            dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) {
 221                if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 ||
 222                    dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708)
 223                        bcma_hcd_init_chip_arm_phy(dev);
 224
 225                bcma_hcd_init_chip_arm_hc(dev);
 226        }
 227}
 228
 229static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
 230{
 231        int gpio;
 232
 233        gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
 234        if (!gpio_is_valid(gpio))
 235                return;
 236
 237        if (val) {
 238                gpio_request(gpio, "bcma-hcd-gpio");
 239                gpio_set_value(gpio, 1);
 240        } else {
 241                gpio_set_value(gpio, 0);
 242                gpio_free(gpio);
 243        }
 244}
 245
 246static const struct usb_ehci_pdata ehci_pdata = {
 247};
 248
 249static const struct usb_ohci_pdata ohci_pdata = {
 250};
 251
 252static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
 253{
 254        struct platform_device *hci_dev;
 255        struct resource hci_res[2];
 256        int ret;
 257
 258        memset(hci_res, 0, sizeof(hci_res));
 259
 260        hci_res[0].start = addr;
 261        hci_res[0].end = hci_res[0].start + 0x1000 - 1;
 262        hci_res[0].flags = IORESOURCE_MEM;
 263
 264        hci_res[1].start = dev->irq;
 265        hci_res[1].flags = IORESOURCE_IRQ;
 266
 267        hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
 268                                        "ehci-platform" , 0);
 269        if (!hci_dev)
 270                return ERR_PTR(-ENOMEM);
 271
 272        hci_dev->dev.parent = &dev->dev;
 273        hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
 274
 275        ret = platform_device_add_resources(hci_dev, hci_res,
 276                                            ARRAY_SIZE(hci_res));
 277        if (ret)
 278                goto err_alloc;
 279        if (ohci)
 280                ret = platform_device_add_data(hci_dev, &ohci_pdata,
 281                                               sizeof(ohci_pdata));
 282        else
 283                ret = platform_device_add_data(hci_dev, &ehci_pdata,
 284                                               sizeof(ehci_pdata));
 285        if (ret)
 286                goto err_alloc;
 287        ret = platform_device_add(hci_dev);
 288        if (ret)
 289                goto err_alloc;
 290
 291        return hci_dev;
 292
 293err_alloc:
 294        platform_device_put(hci_dev);
 295        return ERR_PTR(ret);
 296}
 297
 298static int bcma_hcd_probe(struct bcma_device *dev)
 299{
 300        int err;
 301        u32 ohci_addr;
 302        struct bcma_hcd_device *usb_dev;
 303        struct bcma_chipinfo *chipinfo;
 304
 305        chipinfo = &dev->bus->chipinfo;
 306
 307        /* TODO: Probably need checks here; is the core connected? */
 308
 309        if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
 310                return -EOPNOTSUPP;
 311
 312        usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
 313                               GFP_KERNEL);
 314        if (!usb_dev)
 315                return -ENOMEM;
 316
 317        bcma_hci_platform_power_gpio(dev, true);
 318
 319        switch (dev->id.id) {
 320        case BCMA_CORE_NS_USB20:
 321                bcma_hcd_init_chip_arm(dev);
 322                break;
 323        case BCMA_CORE_USB20_HOST:
 324                bcma_hcd_init_chip_mips(dev);
 325                break;
 326        default:
 327                return -ENODEV;
 328        }
 329
 330        /* In AI chips EHCI is addrspace 0, OHCI is 1 */
 331        ohci_addr = dev->addr_s[0];
 332        if ((chipinfo->id == BCMA_CHIP_ID_BCM5357 ||
 333             chipinfo->id == BCMA_CHIP_ID_BCM4749)
 334            && chipinfo->rev == 0)
 335                ohci_addr = 0x18009000;
 336
 337        usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
 338        if (IS_ERR(usb_dev->ohci_dev))
 339                return PTR_ERR(usb_dev->ohci_dev);
 340
 341        usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
 342        if (IS_ERR(usb_dev->ehci_dev)) {
 343                err = PTR_ERR(usb_dev->ehci_dev);
 344                goto err_unregister_ohci_dev;
 345        }
 346
 347        bcma_set_drvdata(dev, usb_dev);
 348        return 0;
 349
 350err_unregister_ohci_dev:
 351        platform_device_unregister(usb_dev->ohci_dev);
 352        return err;
 353}
 354
 355static void bcma_hcd_remove(struct bcma_device *dev)
 356{
 357        struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
 358        struct platform_device *ohci_dev = usb_dev->ohci_dev;
 359        struct platform_device *ehci_dev = usb_dev->ehci_dev;
 360
 361        if (ohci_dev)
 362                platform_device_unregister(ohci_dev);
 363        if (ehci_dev)
 364                platform_device_unregister(ehci_dev);
 365
 366        bcma_core_disable(dev, 0);
 367}
 368
 369static void bcma_hcd_shutdown(struct bcma_device *dev)
 370{
 371        bcma_hci_platform_power_gpio(dev, false);
 372        bcma_core_disable(dev, 0);
 373}
 374
 375#ifdef CONFIG_PM
 376
 377static int bcma_hcd_suspend(struct bcma_device *dev)
 378{
 379        bcma_hci_platform_power_gpio(dev, false);
 380        bcma_core_disable(dev, 0);
 381
 382        return 0;
 383}
 384
 385static int bcma_hcd_resume(struct bcma_device *dev)
 386{
 387        bcma_hci_platform_power_gpio(dev, true);
 388        bcma_core_enable(dev, 0);
 389
 390        return 0;
 391}
 392
 393#else /* !CONFIG_PM */
 394#define bcma_hcd_suspend        NULL
 395#define bcma_hcd_resume NULL
 396#endif /* CONFIG_PM */
 397
 398static const struct bcma_device_id bcma_hcd_table[] = {
 399        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
 400        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
 401        {},
 402};
 403MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
 404
 405static struct bcma_driver bcma_hcd_driver = {
 406        .name           = KBUILD_MODNAME,
 407        .id_table       = bcma_hcd_table,
 408        .probe          = bcma_hcd_probe,
 409        .remove         = bcma_hcd_remove,
 410        .shutdown       = bcma_hcd_shutdown,
 411        .suspend        = bcma_hcd_suspend,
 412        .resume         = bcma_hcd_resume,
 413};
 414
 415static int __init bcma_hcd_init(void)
 416{
 417        return bcma_driver_register(&bcma_hcd_driver);
 418}
 419module_init(bcma_hcd_init);
 420
 421static void __exit bcma_hcd_exit(void)
 422{
 423        bcma_driver_unregister(&bcma_hcd_driver);
 424}
 425module_exit(bcma_hcd_exit);
 426