linux/drivers/usb/host/ohci-nxp.c
<<
>>
Prefs
   1/*
   2 * driver for NXP USB Host devices
   3 *
   4 * Currently supported OHCI host devices:
   5 * - NXP LPC32xx
   6 *
   7 * Authors: Dmitry Chigirev <source@mvista.com>
   8 *          Vitaly Wool <vitalywool@gmail.com>
   9 *
  10 * register initialization is based on code examples provided by Philips
  11 * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
  12 *
  13 * NOTE: This driver does not have suspend/resume functionality
  14 * This driver is intended for engineering development purposes only
  15 *
  16 * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
  17 * the terms of the GNU General Public License version 2. This program
  18 * is licensed "as is" without any warranty of any kind, whether express
  19 * or implied.
  20 */
  21#include <linux/clk.h>
  22#include <linux/dma-mapping.h>
  23#include <linux/io.h>
  24#include <linux/i2c.h>
  25#include <linux/kernel.h>
  26#include <linux/module.h>
  27#include <linux/of.h>
  28#include <linux/platform_device.h>
  29#include <linux/usb/isp1301.h>
  30#include <linux/usb.h>
  31#include <linux/usb/hcd.h>
  32
  33#include "ohci.h"
  34
  35
  36#include <mach/hardware.h>
  37#include <asm/mach-types.h>
  38#include <asm/io.h>
  39
  40#include <mach/platform.h>
  41#include <mach/irqs.h>
  42
  43#define USB_CONFIG_BASE         0x31020000
  44#define PWRMAN_BASE             0x40004000
  45
  46#define USB_CTRL                IO_ADDRESS(PWRMAN_BASE + 0x64)
  47
  48/* USB_CTRL bit defines */
  49#define USB_SLAVE_HCLK_EN       (1 << 24)
  50#define USB_DEV_NEED_CLK_EN     (1 << 22)
  51#define USB_HOST_NEED_CLK_EN    (1 << 21)
  52#define PAD_CONTROL_LAST_DRIVEN (1 << 19)
  53
  54#define USB_OTG_STAT_CONTROL    IO_ADDRESS(USB_CONFIG_BASE + 0x110)
  55
  56/* USB_OTG_STAT_CONTROL bit defines */
  57#define TRANSPARENT_I2C_EN      (1 << 7)
  58#define HOST_EN                 (1 << 0)
  59
  60/* On LPC32xx, those are undefined */
  61#ifndef start_int_set_falling_edge
  62#define start_int_set_falling_edge(irq)
  63#define start_int_set_rising_edge(irq)
  64#define start_int_ack(irq)
  65#define start_int_mask(irq)
  66#define start_int_umask(irq)
  67#endif
  68
  69#define DRIVER_DESC "OHCI NXP driver"
  70
  71static const char hcd_name[] = "ohci-nxp";
  72static struct hc_driver __read_mostly ohci_nxp_hc_driver;
  73
  74static struct i2c_client *isp1301_i2c_client;
  75
  76extern int usb_disabled(void);
  77
  78static struct clk *usb_pll_clk;
  79static struct clk *usb_dev_clk;
  80static struct clk *usb_otg_clk;
  81
  82static void isp1301_configure_lpc32xx(void)
  83{
  84        /* LPC32XX only supports DAT_SE0 USB mode */
  85        /* This sequence is important */
  86
  87        /* Disable transparent UART mode first */
  88        i2c_smbus_write_byte_data(isp1301_i2c_client,
  89                (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
  90                MC1_UART_EN);
  91        i2c_smbus_write_byte_data(isp1301_i2c_client,
  92                (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
  93                ~MC1_SPEED_REG);
  94        i2c_smbus_write_byte_data(isp1301_i2c_client,
  95                                  ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
  96        i2c_smbus_write_byte_data(isp1301_i2c_client,
  97                  (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
  98                  ~0);
  99        i2c_smbus_write_byte_data(isp1301_i2c_client,
 100                ISP1301_I2C_MODE_CONTROL_2,
 101                (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
 102        i2c_smbus_write_byte_data(isp1301_i2c_client,
 103                (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
 104        i2c_smbus_write_byte_data(isp1301_i2c_client,
 105                ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
 106        i2c_smbus_write_byte_data(isp1301_i2c_client,
 107                ISP1301_I2C_OTG_CONTROL_1,
 108                (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
 109        i2c_smbus_write_byte_data(isp1301_i2c_client,
 110                (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
 111                (OTG1_DM_PULLUP | OTG1_DP_PULLUP));
 112        i2c_smbus_write_byte_data(isp1301_i2c_client,
 113                ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
 114        i2c_smbus_write_byte_data(isp1301_i2c_client,
 115                ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
 116                ~0);
 117        i2c_smbus_write_byte_data(isp1301_i2c_client,
 118                ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
 119
 120        /* Enable usb_need_clk clock after transceiver is initialized */
 121        __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
 122
 123        printk(KERN_INFO "ISP1301 Vendor ID  : 0x%04x\n",
 124              i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
 125        printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
 126              i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
 127        printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
 128              i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
 129}
 130
 131static void isp1301_configure(void)
 132{
 133        isp1301_configure_lpc32xx();
 134}
 135
 136static inline void isp1301_vbus_on(void)
 137{
 138        i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
 139                                  OTG1_VBUS_DRV);
 140}
 141
 142static inline void isp1301_vbus_off(void)
 143{
 144        i2c_smbus_write_byte_data(isp1301_i2c_client,
 145                ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
 146                OTG1_VBUS_DRV);
 147}
 148
 149static void ohci_nxp_start_hc(void)
 150{
 151        unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
 152        __raw_writel(tmp, USB_OTG_STAT_CONTROL);
 153        isp1301_vbus_on();
 154}
 155
 156static void ohci_nxp_stop_hc(void)
 157{
 158        unsigned long tmp;
 159        isp1301_vbus_off();
 160        tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
 161        __raw_writel(tmp, USB_OTG_STAT_CONTROL);
 162}
 163
 164static int ohci_hcd_nxp_probe(struct platform_device *pdev)
 165{
 166        struct usb_hcd *hcd = 0;
 167        const struct hc_driver *driver = &ohci_nxp_hc_driver;
 168        struct resource *res;
 169        int ret = 0, irq;
 170        struct device_node *isp1301_node;
 171
 172        if (pdev->dev.of_node) {
 173                isp1301_node = of_parse_phandle(pdev->dev.of_node,
 174                                                "transceiver", 0);
 175        } else {
 176                isp1301_node = NULL;
 177        }
 178
 179        isp1301_i2c_client = isp1301_get_client(isp1301_node);
 180        if (!isp1301_i2c_client) {
 181                return -EPROBE_DEFER;
 182        }
 183
 184        ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 185        if (ret)
 186                goto fail_disable;
 187
 188        dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
 189        if (usb_disabled()) {
 190                dev_err(&pdev->dev, "USB is disabled\n");
 191                ret = -ENODEV;
 192                goto fail_disable;
 193        }
 194
 195        /* Enable AHB slave USB clock, needed for further USB clock control */
 196        __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL);
 197
 198        /* Enable USB PLL */
 199        usb_pll_clk = devm_clk_get(&pdev->dev, "ck_pll5");
 200        if (IS_ERR(usb_pll_clk)) {
 201                dev_err(&pdev->dev, "failed to acquire USB PLL\n");
 202                ret = PTR_ERR(usb_pll_clk);
 203                goto fail_disable;
 204        }
 205
 206        ret = clk_enable(usb_pll_clk);
 207        if (ret < 0) {
 208                dev_err(&pdev->dev, "failed to start USB PLL\n");
 209                goto fail_disable;
 210        }
 211
 212        ret = clk_set_rate(usb_pll_clk, 48000);
 213        if (ret < 0) {
 214                dev_err(&pdev->dev, "failed to set USB clock rate\n");
 215                goto fail_rate;
 216        }
 217
 218        /* Enable USB device clock */
 219        usb_dev_clk = devm_clk_get(&pdev->dev, "ck_usbd");
 220        if (IS_ERR(usb_dev_clk)) {
 221                dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
 222                ret = PTR_ERR(usb_dev_clk);
 223                goto fail_rate;
 224        }
 225
 226        ret = clk_enable(usb_dev_clk);
 227        if (ret < 0) {
 228                dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
 229                goto fail_rate;
 230        }
 231
 232        /* Enable USB otg clocks */
 233        usb_otg_clk = devm_clk_get(&pdev->dev, "ck_usb_otg");
 234        if (IS_ERR(usb_otg_clk)) {
 235                dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
 236                ret = PTR_ERR(usb_otg_clk);
 237                goto fail_otg;
 238        }
 239
 240        __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
 241
 242        ret = clk_enable(usb_otg_clk);
 243        if (ret < 0) {
 244                dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
 245                goto fail_otg;
 246        }
 247
 248        isp1301_configure();
 249
 250        hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 251        if (!hcd) {
 252                dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
 253                ret = -ENOMEM;
 254                goto fail_hcd;
 255        }
 256
 257        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 258        hcd->regs = devm_ioremap_resource(&pdev->dev, res);
 259        if (IS_ERR(hcd->regs)) {
 260                ret = PTR_ERR(hcd->regs);
 261                goto fail_resource;
 262        }
 263        hcd->rsrc_start = res->start;
 264        hcd->rsrc_len = resource_size(res);
 265
 266        irq = platform_get_irq(pdev, 0);
 267        if (irq < 0) {
 268                ret = -ENXIO;
 269                goto fail_resource;
 270        }
 271
 272        ohci_nxp_start_hc();
 273        platform_set_drvdata(pdev, hcd);
 274
 275        dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
 276        ret = usb_add_hcd(hcd, irq, 0);
 277        if (ret == 0) {
 278                device_wakeup_enable(hcd->self.controller);
 279                return ret;
 280        }
 281
 282        ohci_nxp_stop_hc();
 283fail_resource:
 284        usb_put_hcd(hcd);
 285fail_hcd:
 286        clk_disable(usb_otg_clk);
 287fail_otg:
 288        clk_disable(usb_dev_clk);
 289fail_rate:
 290        clk_disable(usb_pll_clk);
 291fail_disable:
 292        isp1301_i2c_client = NULL;
 293        return ret;
 294}
 295
 296static int ohci_hcd_nxp_remove(struct platform_device *pdev)
 297{
 298        struct usb_hcd *hcd = platform_get_drvdata(pdev);
 299
 300        usb_remove_hcd(hcd);
 301        ohci_nxp_stop_hc();
 302        usb_put_hcd(hcd);
 303        clk_disable(usb_pll_clk);
 304        clk_disable(usb_dev_clk);
 305        i2c_unregister_device(isp1301_i2c_client);
 306        isp1301_i2c_client = NULL;
 307
 308        return 0;
 309}
 310
 311/* work with hotplug and coldplug */
 312MODULE_ALIAS("platform:usb-ohci");
 313
 314#ifdef CONFIG_OF
 315static const struct of_device_id ohci_hcd_nxp_match[] = {
 316        { .compatible = "nxp,ohci-nxp" },
 317        {},
 318};
 319MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
 320#endif
 321
 322static struct platform_driver ohci_hcd_nxp_driver = {
 323        .driver = {
 324                .name = "usb-ohci",
 325                .of_match_table = of_match_ptr(ohci_hcd_nxp_match),
 326        },
 327        .probe = ohci_hcd_nxp_probe,
 328        .remove = ohci_hcd_nxp_remove,
 329};
 330
 331static int __init ohci_nxp_init(void)
 332{
 333        if (usb_disabled())
 334                return -ENODEV;
 335
 336        pr_info("%s: " DRIVER_DESC "\n", hcd_name);
 337
 338        ohci_init_driver(&ohci_nxp_hc_driver, NULL);
 339        return platform_driver_register(&ohci_hcd_nxp_driver);
 340}
 341module_init(ohci_nxp_init);
 342
 343static void __exit ohci_nxp_cleanup(void)
 344{
 345        platform_driver_unregister(&ohci_hcd_nxp_driver);
 346}
 347module_exit(ohci_nxp_cleanup);
 348
 349MODULE_DESCRIPTION(DRIVER_DESC);
 350MODULE_LICENSE("GPL v2");
 351