1
2
3
4
5
6
7
8
9
10
11#include <linux/kernel.h>
12#include <linux/module.h>
13#include <linux/interrupt.h>
14#include <linux/input.h>
15#include <linux/leds.h>
16#include <linux/of_irq.h>
17#include <linux/regmap.h>
18#include <linux/i2c.h>
19#include <linux/gpio/consumer.h>
20
21#define CAP11XX_REG_MAIN_CONTROL 0x00
22#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6)
23#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK (0xc0)
24#define CAP11XX_REG_MAIN_CONTROL_DLSEEP BIT(4)
25#define CAP11XX_REG_GENERAL_STATUS 0x02
26#define CAP11XX_REG_SENSOR_INPUT 0x03
27#define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a
28#define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X))
29#define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f
30#define CAP11XX_REG_CONFIG 0x20
31#define CAP11XX_REG_SENSOR_ENABLE 0x21
32#define CAP11XX_REG_SENSOR_CONFIG 0x22
33#define CAP11XX_REG_SENSOR_CONFIG2 0x23
34#define CAP11XX_REG_SAMPLING_CONFIG 0x24
35#define CAP11XX_REG_CALIBRATION 0x26
36#define CAP11XX_REG_INT_ENABLE 0x27
37#define CAP11XX_REG_REPEAT_RATE 0x28
38#define CAP11XX_REG_MT_CONFIG 0x2a
39#define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b
40#define CAP11XX_REG_MT_PATTERN 0x2d
41#define CAP11XX_REG_RECALIB_CONFIG 0x2f
42#define CAP11XX_REG_SENSOR_THRESH(X) (0x30 + (X))
43#define CAP11XX_REG_SENSOR_NOISE_THRESH 0x38
44#define CAP11XX_REG_STANDBY_CHANNEL 0x40
45#define CAP11XX_REG_STANDBY_CONFIG 0x41
46#define CAP11XX_REG_STANDBY_SENSITIVITY 0x42
47#define CAP11XX_REG_STANDBY_THRESH 0x43
48#define CAP11XX_REG_CONFIG2 0x44
49#define CAP11XX_REG_CONFIG2_ALT_POL BIT(6)
50#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X))
51#define CAP11XX_REG_LED_POLARITY 0x73
52#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74
53
54#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90
55#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91
56#define CAP11XX_REG_LED_DUTY_CYCLE_3 0x92
57#define CAP11XX_REG_LED_DUTY_CYCLE_4 0x93
58
59#define CAP11XX_REG_LED_DUTY_MIN_MASK (0x0f)
60#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT (0)
61#define CAP11XX_REG_LED_DUTY_MAX_MASK (0xf0)
62#define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT (4)
63#define CAP11XX_REG_LED_DUTY_MAX_VALUE (15)
64
65#define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X))
66#define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9
67#define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba
68#define CAP11XX_REG_PRODUCT_ID 0xfd
69#define CAP11XX_REG_MANUFACTURER_ID 0xfe
70#define CAP11XX_REG_REVISION 0xff
71
72#define CAP11XX_MANUFACTURER_ID 0x5d
73
74#ifdef CONFIG_LEDS_CLASS
75struct cap11xx_led {
76 struct cap11xx_priv *priv;
77 struct led_classdev cdev;
78 struct work_struct work;
79 u32 reg;
80 enum led_brightness new_brightness;
81};
82#endif
83
84struct cap11xx_priv {
85 struct regmap *regmap;
86 struct input_dev *idev;
87
88 struct cap11xx_led *leds;
89 int num_leds;
90
91
92 u32 keycodes[];
93};
94
95struct cap11xx_hw_model {
96 u8 product_id;
97 unsigned int num_channels;
98 unsigned int num_leds;
99};
100
101enum {
102 CAP1106,
103 CAP1126,
104 CAP1188,
105};
106
107static const struct cap11xx_hw_model cap11xx_devices[] = {
108 [CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0 },
109 [CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2 },
110 [CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8 },
111};
112
113static const struct reg_default cap11xx_reg_defaults[] = {
114 { CAP11XX_REG_MAIN_CONTROL, 0x00 },
115 { CAP11XX_REG_GENERAL_STATUS, 0x00 },
116 { CAP11XX_REG_SENSOR_INPUT, 0x00 },
117 { CAP11XX_REG_NOISE_FLAG_STATUS, 0x00 },
118 { CAP11XX_REG_SENSITIVITY_CONTROL, 0x2f },
119 { CAP11XX_REG_CONFIG, 0x20 },
120 { CAP11XX_REG_SENSOR_ENABLE, 0x3f },
121 { CAP11XX_REG_SENSOR_CONFIG, 0xa4 },
122 { CAP11XX_REG_SENSOR_CONFIG2, 0x07 },
123 { CAP11XX_REG_SAMPLING_CONFIG, 0x39 },
124 { CAP11XX_REG_CALIBRATION, 0x00 },
125 { CAP11XX_REG_INT_ENABLE, 0x3f },
126 { CAP11XX_REG_REPEAT_RATE, 0x3f },
127 { CAP11XX_REG_MT_CONFIG, 0x80 },
128 { CAP11XX_REG_MT_PATTERN_CONFIG, 0x00 },
129 { CAP11XX_REG_MT_PATTERN, 0x3f },
130 { CAP11XX_REG_RECALIB_CONFIG, 0x8a },
131 { CAP11XX_REG_SENSOR_THRESH(0), 0x40 },
132 { CAP11XX_REG_SENSOR_THRESH(1), 0x40 },
133 { CAP11XX_REG_SENSOR_THRESH(2), 0x40 },
134 { CAP11XX_REG_SENSOR_THRESH(3), 0x40 },
135 { CAP11XX_REG_SENSOR_THRESH(4), 0x40 },
136 { CAP11XX_REG_SENSOR_THRESH(5), 0x40 },
137 { CAP11XX_REG_SENSOR_NOISE_THRESH, 0x01 },
138 { CAP11XX_REG_STANDBY_CHANNEL, 0x00 },
139 { CAP11XX_REG_STANDBY_CONFIG, 0x39 },
140 { CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 },
141 { CAP11XX_REG_STANDBY_THRESH, 0x40 },
142 { CAP11XX_REG_CONFIG2, 0x40 },
143 { CAP11XX_REG_LED_POLARITY, 0x00 },
144 { CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 },
145 { CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 },
146};
147
148static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
149{
150 switch (reg) {
151 case CAP11XX_REG_MAIN_CONTROL:
152 case CAP11XX_REG_SENSOR_INPUT:
153 case CAP11XX_REG_SENOR_DELTA(0):
154 case CAP11XX_REG_SENOR_DELTA(1):
155 case CAP11XX_REG_SENOR_DELTA(2):
156 case CAP11XX_REG_SENOR_DELTA(3):
157 case CAP11XX_REG_SENOR_DELTA(4):
158 case CAP11XX_REG_SENOR_DELTA(5):
159 case CAP11XX_REG_PRODUCT_ID:
160 case CAP11XX_REG_MANUFACTURER_ID:
161 case CAP11XX_REG_REVISION:
162 return true;
163 }
164
165 return false;
166}
167
168static const struct regmap_config cap11xx_regmap_config = {
169 .reg_bits = 8,
170 .val_bits = 8,
171
172 .max_register = CAP11XX_REG_REVISION,
173 .reg_defaults = cap11xx_reg_defaults,
174
175 .num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults),
176 .cache_type = REGCACHE_RBTREE,
177 .volatile_reg = cap11xx_volatile_reg,
178};
179
180static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
181{
182 struct cap11xx_priv *priv = data;
183 unsigned int status;
184 int ret, i;
185
186
187
188
189
190 ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0);
191 if (ret < 0)
192 goto out;
193
194 ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status);
195 if (ret < 0)
196 goto out;
197
198 for (i = 0; i < priv->idev->keycodemax; i++)
199 input_report_key(priv->idev, priv->keycodes[i],
200 status & (1 << i));
201
202 input_sync(priv->idev);
203
204out:
205 return IRQ_HANDLED;
206}
207
208static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep)
209{
210
211
212
213 if (IS_ENABLED(CONFIG_LEDS_CLASS) && priv->num_leds)
214 return 0;
215
216 return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
217 CAP11XX_REG_MAIN_CONTROL_DLSEEP,
218 sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0);
219}
220
221static int cap11xx_input_open(struct input_dev *idev)
222{
223 struct cap11xx_priv *priv = input_get_drvdata(idev);
224
225 return cap11xx_set_sleep(priv, false);
226}
227
228static void cap11xx_input_close(struct input_dev *idev)
229{
230 struct cap11xx_priv *priv = input_get_drvdata(idev);
231
232 cap11xx_set_sleep(priv, true);
233}
234
235#ifdef CONFIG_LEDS_CLASS
236static void cap11xx_led_work(struct work_struct *work)
237{
238 struct cap11xx_led *led = container_of(work, struct cap11xx_led, work);
239 struct cap11xx_priv *priv = led->priv;
240 int value = led->new_brightness;
241
242
243
244
245
246 regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL,
247 BIT(led->reg), value ? BIT(led->reg) : 0);
248}
249
250static void cap11xx_led_set(struct led_classdev *cdev,
251 enum led_brightness value)
252{
253 struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
254
255 if (led->new_brightness == value)
256 return;
257
258 led->new_brightness = value;
259 schedule_work(&led->work);
260}
261
262static int cap11xx_init_leds(struct device *dev,
263 struct cap11xx_priv *priv, int num_leds)
264{
265 struct device_node *node = dev->of_node, *child;
266 struct cap11xx_led *led;
267 int cnt = of_get_child_count(node);
268 int error;
269
270 if (!num_leds || !cnt)
271 return 0;
272
273 if (cnt > num_leds)
274 return -EINVAL;
275
276 led = devm_kcalloc(dev, cnt, sizeof(struct cap11xx_led), GFP_KERNEL);
277 if (!led)
278 return -ENOMEM;
279
280 priv->leds = led;
281
282 error = regmap_update_bits(priv->regmap,
283 CAP11XX_REG_LED_OUTPUT_CONTROL, 0xff, 0);
284 if (error)
285 return error;
286
287 error = regmap_update_bits(priv->regmap, CAP11XX_REG_LED_DUTY_CYCLE_4,
288 CAP11XX_REG_LED_DUTY_MAX_MASK,
289 CAP11XX_REG_LED_DUTY_MAX_VALUE <<
290 CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT);
291 if (error)
292 return error;
293
294 for_each_child_of_node(node, child) {
295 u32 reg;
296
297 led->cdev.name =
298 of_get_property(child, "label", NULL) ? : child->name;
299 led->cdev.default_trigger =
300 of_get_property(child, "linux,default-trigger", NULL);
301 led->cdev.flags = 0;
302 led->cdev.brightness_set = cap11xx_led_set;
303 led->cdev.max_brightness = 1;
304 led->cdev.brightness = LED_OFF;
305
306 error = of_property_read_u32(child, "reg", ®);
307 if (error != 0 || reg >= num_leds)
308 return -EINVAL;
309
310 led->reg = reg;
311 led->priv = priv;
312
313 INIT_WORK(&led->work, cap11xx_led_work);
314
315 error = devm_led_classdev_register(dev, &led->cdev);
316 if (error)
317 return error;
318
319 priv->num_leds++;
320 led++;
321 }
322
323 return 0;
324}
325#else
326static int cap11xx_init_leds(struct device *dev,
327 struct cap11xx_priv *priv, int num_leds)
328{
329 return 0;
330}
331#endif
332
333static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
334 const struct i2c_device_id *id)
335{
336 struct device *dev = &i2c_client->dev;
337 struct cap11xx_priv *priv;
338 struct device_node *node;
339 const struct cap11xx_hw_model *cap;
340 int i, error, irq, gain = 0;
341 unsigned int val, rev;
342 u32 gain32;
343
344 if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
345 dev_err(dev, "Invalid device ID %lu\n", id->driver_data);
346 return -EINVAL;
347 }
348
349 cap = &cap11xx_devices[id->driver_data];
350 if (!cap || !cap->num_channels) {
351 dev_err(dev, "Invalid device configuration\n");
352 return -EINVAL;
353 }
354
355 priv = devm_kzalloc(dev,
356 sizeof(*priv) +
357 cap->num_channels * sizeof(priv->keycodes[0]),
358 GFP_KERNEL);
359 if (!priv)
360 return -ENOMEM;
361
362 priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config);
363 if (IS_ERR(priv->regmap))
364 return PTR_ERR(priv->regmap);
365
366 error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val);
367 if (error)
368 return error;
369
370 if (val != cap->product_id) {
371 dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
372 val, cap->product_id);
373 return -ENXIO;
374 }
375
376 error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val);
377 if (error)
378 return error;
379
380 if (val != CAP11XX_MANUFACTURER_ID) {
381 dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
382 val, CAP11XX_MANUFACTURER_ID);
383 return -ENXIO;
384 }
385
386 error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev);
387 if (error < 0)
388 return error;
389
390 dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev);
391 i2c_set_clientdata(i2c_client, priv);
392 node = dev->of_node;
393
394 if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
395 if (is_power_of_2(gain32) && gain32 <= 8)
396 gain = ilog2(gain32);
397 else
398 dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
399 }
400
401 if (of_property_read_bool(node, "microchip,irq-active-high")) {
402 error = regmap_update_bits(priv->regmap, CAP11XX_REG_CONFIG2,
403 CAP11XX_REG_CONFIG2_ALT_POL, 0);
404 if (error)
405 return error;
406 }
407
408
409 for (i = 0; i < cap->num_channels; i++)
410 priv->keycodes[i] = KEY_A + i;
411
412 of_property_read_u32_array(node, "linux,keycodes",
413 priv->keycodes, cap->num_channels);
414
415 error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
416 CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
417 gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
418 if (error)
419 return error;
420
421
422 error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
423 if (error)
424 return error;
425
426 priv->idev = devm_input_allocate_device(dev);
427 if (!priv->idev)
428 return -ENOMEM;
429
430 priv->idev->name = "CAP11XX capacitive touch sensor";
431 priv->idev->id.bustype = BUS_I2C;
432 priv->idev->evbit[0] = BIT_MASK(EV_KEY);
433
434 if (of_property_read_bool(node, "autorepeat"))
435 __set_bit(EV_REP, priv->idev->evbit);
436
437 for (i = 0; i < cap->num_channels; i++)
438 __set_bit(priv->keycodes[i], priv->idev->keybit);
439
440 __clear_bit(KEY_RESERVED, priv->idev->keybit);
441
442 priv->idev->keycode = priv->keycodes;
443 priv->idev->keycodesize = sizeof(priv->keycodes[0]);
444 priv->idev->keycodemax = cap->num_channels;
445
446 priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID;
447 priv->idev->id.product = cap->product_id;
448 priv->idev->id.version = rev;
449
450 priv->idev->open = cap11xx_input_open;
451 priv->idev->close = cap11xx_input_close;
452
453 error = cap11xx_init_leds(dev, priv, cap->num_leds);
454 if (error)
455 return error;
456
457 input_set_drvdata(priv->idev, priv);
458
459
460
461
462
463 cap11xx_set_sleep(priv, true);
464
465 error = input_register_device(priv->idev);
466 if (error)
467 return error;
468
469 irq = irq_of_parse_and_map(node, 0);
470 if (!irq) {
471 dev_err(dev, "Unable to parse or map IRQ\n");
472 return -ENXIO;
473 }
474
475 error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func,
476 IRQF_ONESHOT, dev_name(dev), priv);
477 if (error)
478 return error;
479
480 return 0;
481}
482
483static const struct of_device_id cap11xx_dt_ids[] = {
484 { .compatible = "microchip,cap1106", },
485 { .compatible = "microchip,cap1126", },
486 { .compatible = "microchip,cap1188", },
487 {}
488};
489MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
490
491static const struct i2c_device_id cap11xx_i2c_ids[] = {
492 { "cap1106", CAP1106 },
493 { "cap1126", CAP1126 },
494 { "cap1188", CAP1188 },
495 {}
496};
497MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);
498
499static struct i2c_driver cap11xx_i2c_driver = {
500 .driver = {
501 .name = "cap11xx",
502 .of_match_table = cap11xx_dt_ids,
503 },
504 .id_table = cap11xx_i2c_ids,
505 .probe = cap11xx_i2c_probe,
506};
507
508module_i2c_driver(cap11xx_i2c_driver);
509
510MODULE_DESCRIPTION("Microchip CAP11XX driver");
511MODULE_AUTHOR("Daniel Mack <linux@zonque.org>");
512MODULE_LICENSE("GPL v2");
513
