linux/drivers/net/ethernet/seeq/ether3.c
<<
>>
Prefs
   1/*
   2 *  linux/drivers/acorn/net/ether3.c
   3 *
   4 *  Copyright (C) 1995-2000 Russell King
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License version 2 as
   8 * published by the Free Software Foundation.
   9 *
  10 * SEEQ nq8005 ethernet driver for Acorn/ANT Ether3 card
  11 *  for Acorn machines
  12 *
  13 * By Russell King, with some suggestions from borris@ant.co.uk
  14 *
  15 * Changelog:
  16 * 1.04 RMK     29/02/1996      Won't pass packets that are from our ethernet
  17 *                              address up to the higher levels - they're
  18 *                              silently ignored.  I/F can now be put into
  19 *                              multicast mode.  Receiver routine optimised.
  20 * 1.05 RMK     30/02/1996      Now claims interrupt at open when part of
  21 *                              the kernel rather than when a module.
  22 * 1.06 RMK     02/03/1996      Various code cleanups
  23 * 1.07 RMK     13/10/1996      Optimised interrupt routine and transmit
  24 *                              routines.
  25 * 1.08 RMK     14/10/1996      Fixed problem with too many packets,
  26 *                              prevented the kernel message about dropped
  27 *                              packets appearing too many times a second.
  28 *                              Now does not disable all IRQs, only the IRQ
  29 *                              used by this card.
  30 * 1.09 RMK     10/11/1996      Only enables TX irq when buffer space is low,
  31 *                              but we still service the TX queue if we get a
  32 *                              RX interrupt.
  33 * 1.10 RMK     15/07/1997      Fixed autoprobing of NQ8004.
  34 * 1.11 RMK     16/11/1997      Fixed autoprobing of NQ8005A.
  35 * 1.12 RMK     31/12/1997      Removed reference to dev_tint for Linux 2.1.
  36 *      RMK     27/06/1998      Changed asm/delay.h to linux/delay.h.
  37 * 1.13 RMK     29/06/1998      Fixed problem with transmission of packets.
  38 *                              Chip seems to have a bug in, whereby if the
  39 *                              packet starts two bytes from the end of the
  40 *                              buffer, it corrupts the receiver chain, and
  41 *                              never updates the transmit status correctly.
  42 * 1.14 RMK     07/01/1998      Added initial code for ETHERB addressing.
  43 * 1.15 RMK     30/04/1999      More fixes to the transmit routine for buggy
  44 *                              hardware.
  45 * 1.16 RMK     10/02/2000      Updated for 2.3.43
  46 * 1.17 RMK     13/05/2000      Updated for 2.3.99-pre8
  47 */
  48
  49#include <linux/module.h>
  50#include <linux/kernel.h>
  51#include <linux/types.h>
  52#include <linux/fcntl.h>
  53#include <linux/interrupt.h>
  54#include <linux/ioport.h>
  55#include <linux/in.h>
  56#include <linux/slab.h>
  57#include <linux/string.h>
  58#include <linux/errno.h>
  59#include <linux/netdevice.h>
  60#include <linux/etherdevice.h>
  61#include <linux/skbuff.h>
  62#include <linux/device.h>
  63#include <linux/init.h>
  64#include <linux/delay.h>
  65#include <linux/bitops.h>
  66
  67#include <asm/ecard.h>
  68#include <asm/io.h>
  69
  70static char version[] = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n";
  71
  72#include "ether3.h"
  73
  74static unsigned int net_debug = NET_DEBUG;
  75
  76static void     ether3_setmulticastlist(struct net_device *dev);
  77static int      ether3_rx(struct net_device *dev, unsigned int maxcnt);
  78static void     ether3_tx(struct net_device *dev);
  79static int      ether3_open (struct net_device *dev);
  80static int      ether3_sendpacket (struct sk_buff *skb, struct net_device *dev);
  81static irqreturn_t ether3_interrupt (int irq, void *dev_id);
  82static int      ether3_close (struct net_device *dev);
  83static void     ether3_setmulticastlist (struct net_device *dev);
  84static void     ether3_timeout(struct net_device *dev);
  85
  86#define BUS_16          2
  87#define BUS_8           1
  88#define BUS_UNKNOWN     0
  89
  90/* --------------------------------------------------------------------------- */
  91
  92typedef enum {
  93        buffer_write,
  94        buffer_read
  95} buffer_rw_t;
  96
  97/*
  98 * ether3 read/write.  Slow things down a bit...
  99 * The SEEQ8005 doesn't like us writing to its registers
 100 * too quickly.
 101 */
 102static inline void ether3_outb(int v, void __iomem *r)
 103{
 104        writeb(v, r);
 105        udelay(1);
 106}
 107
 108static inline void ether3_outw(int v, void __iomem *r)
 109{
 110        writew(v, r);
 111        udelay(1);
 112}
 113#define ether3_inb(r)           ({ unsigned int __v = readb((r)); udelay(1); __v; })
 114#define ether3_inw(r)           ({ unsigned int __v = readw((r)); udelay(1); __v; })
 115
 116static int
 117ether3_setbuffer(struct net_device *dev, buffer_rw_t read, int start)
 118{
 119        int timeout = 1000;
 120
 121        ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
 122        ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND);
 123
 124        while ((ether3_inw(REG_STATUS) & STAT_FIFOEMPTY) == 0) {
 125                if (!timeout--) {
 126                        printk("%s: setbuffer broken\n", dev->name);
 127                        priv(dev)->broken = 1;
 128                        return 1;
 129                }
 130                udelay(1);
 131        }
 132
 133        if (read == buffer_read) {
 134                ether3_outw(start, REG_DMAADDR);
 135                ether3_outw(priv(dev)->regs.command | CMD_FIFOREAD, REG_COMMAND);
 136        } else {
 137                ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND);
 138                ether3_outw(start, REG_DMAADDR);
 139        }
 140        return 0;
 141}
 142
 143/*
 144 * write data to the buffer memory
 145 */
 146#define ether3_writebuffer(dev,data,length)                     \
 147        writesw(REG_BUFWIN, (data), (length) >> 1)
 148
 149#define ether3_writeword(dev,data)                              \
 150        writew((data), REG_BUFWIN)
 151
 152#define ether3_writelong(dev,data)      {                       \
 153        void __iomem *reg_bufwin = REG_BUFWIN;                  \
 154        writew((data), reg_bufwin);                             \
 155        writew((data) >> 16, reg_bufwin);                       \
 156}
 157
 158/*
 159 * read data from the buffer memory
 160 */
 161#define ether3_readbuffer(dev,data,length)                      \
 162        readsw(REG_BUFWIN, (data), (length) >> 1)
 163
 164#define ether3_readword(dev)                                    \
 165        readw(REG_BUFWIN)
 166
 167#define ether3_readlong(dev)                                    \
 168        readw(REG_BUFWIN) | (readw(REG_BUFWIN) << 16)
 169
 170/*
 171 * Switch LED off...
 172 */
 173static void ether3_ledoff(unsigned long data)
 174{
 175        struct net_device *dev = (struct net_device *)data;
 176        ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
 177}
 178
 179/*
 180 * switch LED on...
 181 */
 182static inline void ether3_ledon(struct net_device *dev)
 183{
 184        del_timer(&priv(dev)->timer);
 185        priv(dev)->timer.expires = jiffies + HZ / 50; /* leave on for 1/50th second */
 186        priv(dev)->timer.data = (unsigned long)dev;
 187        priv(dev)->timer.function = ether3_ledoff;
 188        add_timer(&priv(dev)->timer);
 189        if (priv(dev)->regs.config2 & CFG2_CTRLO)
 190                ether3_outw(priv(dev)->regs.config2 &= ~CFG2_CTRLO, REG_CONFIG2);
 191}
 192
 193/*
 194 * Read the ethernet address string from the on board rom.
 195 * This is an ascii string!!!
 196 */
 197static int
 198ether3_addr(char *addr, struct expansion_card *ec)
 199{
 200        struct in_chunk_dir cd;
 201        char *s;
 202        
 203        if (ecard_readchunk(&cd, ec, 0xf5, 0) && (s = strchr(cd.d.string, '('))) {
 204                int i;
 205                for (i = 0; i<6; i++) {
 206                        addr[i] = simple_strtoul(s + 1, &s, 0x10);
 207                        if (*s != (i==5?')' : ':' ))
 208                                break;
 209                }
 210                if (i == 6)
 211                        return 0;
 212        }
 213        /* I wonder if we should even let the user continue in this case
 214         *   - no, it would be better to disable the device
 215         */
 216        printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n");
 217        return -ENODEV;
 218}
 219
 220/* --------------------------------------------------------------------------- */
 221
 222static int
 223ether3_ramtest(struct net_device *dev, unsigned char byte)
 224{
 225        unsigned char *buffer = kmalloc(RX_END, GFP_KERNEL);
 226        int i,ret = 0;
 227        int max_errors = 4;
 228        int bad = -1;
 229
 230        if (!buffer)
 231                return 1;
 232
 233        memset(buffer, byte, RX_END);
 234        ether3_setbuffer(dev, buffer_write, 0);
 235        ether3_writebuffer(dev, buffer, TX_END);
 236        ether3_setbuffer(dev, buffer_write, RX_START);
 237        ether3_writebuffer(dev, buffer + RX_START, RX_LEN);
 238        memset(buffer, byte ^ 0xff, RX_END);
 239        ether3_setbuffer(dev, buffer_read, 0);
 240        ether3_readbuffer(dev, buffer, TX_END);
 241        ether3_setbuffer(dev, buffer_read, RX_START);
 242        ether3_readbuffer(dev, buffer + RX_START, RX_LEN);
 243
 244        for (i = 0; i < RX_END; i++) {
 245                if (buffer[i] != byte) {
 246                        if (max_errors > 0 && bad != buffer[i]) {
 247                                printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X",
 248                                       dev->name, buffer[i], byte, i);
 249                                ret = 2;
 250                                max_errors--;
 251                                bad = i;
 252                        }
 253                } else {
 254                        if (bad != -1) {
 255                                if (bad != i - 1)
 256                                        printk(" - 0x%04X\n", i - 1);
 257                                printk("\n");
 258                                bad = -1;
 259                        }
 260                }
 261        }
 262        if (bad != -1)
 263                printk(" - 0xffff\n");
 264        kfree(buffer);
 265
 266        return ret;
 267}
 268
 269/* ------------------------------------------------------------------------------- */
 270
 271static int ether3_init_2(struct net_device *dev)
 272{
 273        int i;
 274
 275        priv(dev)->regs.config1 = CFG1_RECVCOMPSTAT0|CFG1_DMABURST8;
 276        priv(dev)->regs.config2 = CFG2_CTRLO|CFG2_RECVCRC|CFG2_ERRENCRC;
 277        priv(dev)->regs.command = 0;
 278
 279        /*
 280         * Set up our hardware address
 281         */
 282        ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1);
 283        for (i = 0; i < 6; i++)
 284                ether3_outb(dev->dev_addr[i], REG_BUFWIN);
 285
 286        if (dev->flags & IFF_PROMISC)
 287                priv(dev)->regs.config1 |= CFG1_RECVPROMISC;
 288        else if (dev->flags & IFF_MULTICAST)
 289                priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI;
 290        else
 291                priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD;
 292
 293        /*
 294         * There is a problem with the NQ8005 in that it occasionally loses the
 295         * last two bytes.  To get round this problem, we receive the CRC as
 296         * well.  That way, if we do lose the last two, then it doesn't matter.
 297         */
 298        ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1);
 299        ether3_outw((TX_END>>8) - 1, REG_BUFWIN);
 300        ether3_outw(priv(dev)->rx_head, REG_RECVPTR);
 301        ether3_outw(0, REG_TRANSMITPTR);
 302        ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND);
 303        ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
 304        ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
 305        ether3_outw(priv(dev)->regs.command, REG_COMMAND);
 306
 307        i = ether3_ramtest(dev, 0x5A);
 308        if(i)
 309                return i;
 310        i = ether3_ramtest(dev, 0x1E);
 311        if(i)
 312                return i;
 313
 314        ether3_setbuffer(dev, buffer_write, 0);
 315        ether3_writelong(dev, 0);
 316        return 0;
 317}
 318
 319static void
 320ether3_init_for_open(struct net_device *dev)
 321{
 322        int i;
 323
 324        /* Reset the chip */
 325        ether3_outw(CFG2_RESET, REG_CONFIG2);
 326        udelay(4);
 327
 328        priv(dev)->regs.command = 0;
 329        ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND);
 330        while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON))
 331                barrier();
 332
 333        ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1);
 334        for (i = 0; i < 6; i++)
 335                ether3_outb(dev->dev_addr[i], REG_BUFWIN);
 336
 337        priv(dev)->tx_head      = 0;
 338        priv(dev)->tx_tail      = 0;
 339        priv(dev)->regs.config2 |= CFG2_CTRLO;
 340        priv(dev)->rx_head      = RX_START;
 341
 342        ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1);
 343        ether3_outw((TX_END>>8) - 1, REG_BUFWIN);
 344        ether3_outw(priv(dev)->rx_head, REG_RECVPTR);
 345        ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND);
 346        ether3_outw(0, REG_TRANSMITPTR);
 347        ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
 348        ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
 349
 350        ether3_setbuffer(dev, buffer_write, 0);
 351        ether3_writelong(dev, 0);
 352
 353        priv(dev)->regs.command = CMD_ENINTRX | CMD_ENINTTX;
 354        ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND);
 355}
 356
 357static inline int
 358ether3_probe_bus_8(struct net_device *dev, int val)
 359{
 360        int write_low, write_high, read_low, read_high;
 361
 362        write_low = val & 255;
 363        write_high = val >> 8;
 364
 365        printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low);
 366
 367        ether3_outb(write_low, REG_RECVPTR);
 368        ether3_outb(write_high, REG_RECVPTR + 4);
 369
 370        read_low = ether3_inb(REG_RECVPTR);
 371        read_high = ether3_inb(REG_RECVPTR + 4);
 372
 373        printk(", read8 [%02X:%02X]\n", read_high, read_low);
 374
 375        return read_low == write_low && read_high == write_high;
 376}
 377
 378static inline int
 379ether3_probe_bus_16(struct net_device *dev, int val)
 380{
 381        int read_val;
 382
 383        ether3_outw(val, REG_RECVPTR);
 384        read_val = ether3_inw(REG_RECVPTR);
 385
 386        printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val);
 387
 388        return read_val == val;
 389}
 390
 391/*
 392 * Open/initialize the board.  This is called (in the current kernel)
 393 * sometime after booting when the 'ifconfig' program is run.
 394 *
 395 * This routine should set everything up anew at each open, even
 396 * registers that "should" only need to be set once at boot, so that
 397 * there is non-reboot way to recover if something goes wrong.
 398 */
 399static int
 400ether3_open(struct net_device *dev)
 401{
 402        if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev))
 403                return -EAGAIN;
 404
 405        ether3_init_for_open(dev);
 406
 407        netif_start_queue(dev);
 408
 409        return 0;
 410}
 411
 412/*
 413 * The inverse routine to ether3_open().
 414 */
 415static int
 416ether3_close(struct net_device *dev)
 417{
 418        netif_stop_queue(dev);
 419
 420        disable_irq(dev->irq);
 421
 422        ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND);
 423        priv(dev)->regs.command = 0;
 424        while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON))
 425                barrier();
 426        ether3_outb(0x80, REG_CONFIG2 + 4);
 427        ether3_outw(0, REG_COMMAND);
 428
 429        free_irq(dev->irq, dev);
 430
 431        return 0;
 432}
 433
 434/*
 435 * Set or clear promiscuous/multicast mode filter for this adaptor.
 436 *
 437 * We don't attempt any packet filtering.  The card may have a SEEQ 8004
 438 * in which does not have the other ethernet address registers present...
 439 */
 440static void ether3_setmulticastlist(struct net_device *dev)
 441{
 442        priv(dev)->regs.config1 &= ~CFG1_RECVPROMISC;
 443
 444        if (dev->flags & IFF_PROMISC) {
 445                /* promiscuous mode */
 446                priv(dev)->regs.config1 |= CFG1_RECVPROMISC;
 447        } else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) {
 448                priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI;
 449        } else
 450                priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD;
 451
 452        ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
 453}
 454
 455static void ether3_timeout(struct net_device *dev)
 456{
 457        unsigned long flags;
 458
 459        del_timer(&priv(dev)->timer);
 460
 461        local_irq_save(flags);
 462        printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name);
 463        printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name,
 464                ether3_inw(REG_STATUS), ether3_inw(REG_CONFIG1), ether3_inw(REG_CONFIG2));
 465        printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name,
 466                ether3_inw(REG_RECVPTR), ether3_inw(REG_RECVEND), ether3_inw(REG_TRANSMITPTR));
 467        printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name,
 468                priv(dev)->tx_head, priv(dev)->tx_tail);
 469        ether3_setbuffer(dev, buffer_read, priv(dev)->tx_tail);
 470        printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev));
 471        local_irq_restore(flags);
 472
 473        priv(dev)->regs.config2 |= CFG2_CTRLO;
 474        dev->stats.tx_errors += 1;
 475        ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
 476        priv(dev)->tx_head = priv(dev)->tx_tail = 0;
 477
 478        netif_wake_queue(dev);
 479}
 480
 481/*
 482 * Transmit a packet
 483 */
 484static int
 485ether3_sendpacket(struct sk_buff *skb, struct net_device *dev)
 486{
 487        unsigned long flags;
 488        unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
 489        unsigned int ptr, next_ptr;
 490
 491        if (priv(dev)->broken) {
 492                dev_kfree_skb(skb);
 493                dev->stats.tx_dropped++;
 494                netif_start_queue(dev);
 495                return NETDEV_TX_OK;
 496        }
 497
 498        length = (length + 1) & ~1;
 499        if (length != skb->len) {
 500                if (skb_padto(skb, length))
 501                        goto out;
 502        }
 503
 504        next_ptr = (priv(dev)->tx_head + 1) & 15;
 505
 506        local_irq_save(flags);
 507
 508        if (priv(dev)->tx_tail == next_ptr) {
 509                local_irq_restore(flags);
 510                return NETDEV_TX_BUSY;  /* unable to queue */
 511        }
 512
 513        ptr              = 0x600 * priv(dev)->tx_head;
 514        priv(dev)->tx_head = next_ptr;
 515        next_ptr        *= 0x600;
 516
 517#define TXHDR_FLAGS (TXHDR_TRANSMIT|TXHDR_CHAINCONTINUE|TXHDR_DATAFOLLOWS|TXHDR_ENSUCCESS)
 518
 519        ether3_setbuffer(dev, buffer_write, next_ptr);
 520        ether3_writelong(dev, 0);
 521        ether3_setbuffer(dev, buffer_write, ptr);
 522        ether3_writelong(dev, 0);
 523        ether3_writebuffer(dev, skb->data, length);
 524        ether3_writeword(dev, htons(next_ptr));
 525        ether3_writeword(dev, TXHDR_CHAINCONTINUE >> 16);
 526        ether3_setbuffer(dev, buffer_write, ptr);
 527        ether3_writeword(dev, htons((ptr + length + 4)));
 528        ether3_writeword(dev, TXHDR_FLAGS >> 16);
 529        ether3_ledon(dev);
 530
 531        if (!(ether3_inw(REG_STATUS) & STAT_TXON)) {
 532                ether3_outw(ptr, REG_TRANSMITPTR);
 533                ether3_outw(priv(dev)->regs.command | CMD_TXON, REG_COMMAND);
 534        }
 535
 536        next_ptr = (priv(dev)->tx_head + 1) & 15;
 537        local_irq_restore(flags);
 538
 539        dev_kfree_skb(skb);
 540
 541        if (priv(dev)->tx_tail == next_ptr)
 542                netif_stop_queue(dev);
 543
 544 out:
 545        return NETDEV_TX_OK;
 546}
 547
 548static irqreturn_t
 549ether3_interrupt(int irq, void *dev_id)
 550{
 551        struct net_device *dev = (struct net_device *)dev_id;
 552        unsigned int status, handled = IRQ_NONE;
 553
 554#if NET_DEBUG > 1
 555        if(net_debug & DEBUG_INT)
 556                printk("eth3irq: %d ", irq);
 557#endif
 558
 559        status = ether3_inw(REG_STATUS);
 560
 561        if (status & STAT_INTRX) {
 562                ether3_outw(CMD_ACKINTRX | priv(dev)->regs.command, REG_COMMAND);
 563                ether3_rx(dev, 12);
 564                handled = IRQ_HANDLED;
 565        }
 566
 567        if (status & STAT_INTTX) {
 568                ether3_outw(CMD_ACKINTTX | priv(dev)->regs.command, REG_COMMAND);
 569                ether3_tx(dev);
 570                handled = IRQ_HANDLED;
 571        }
 572
 573#if NET_DEBUG > 1
 574        if(net_debug & DEBUG_INT)
 575                printk("done\n");
 576#endif
 577        return handled;
 578}
 579
 580/*
 581 * If we have a good packet(s), get it/them out of the buffers.
 582 */
 583static int ether3_rx(struct net_device *dev, unsigned int maxcnt)
 584{
 585        unsigned int next_ptr = priv(dev)->rx_head, received = 0;
 586
 587        ether3_ledon(dev);
 588
 589        do {
 590                unsigned int this_ptr, status;
 591                unsigned char addrs[16];
 592
 593                /*
 594                 * read the first 16 bytes from the buffer.
 595                 * This contains the status bytes etc and ethernet addresses,
 596                 * and we also check the source ethernet address to see if
 597                 * it originated from us.
 598                 */
 599                {
 600                        unsigned int temp_ptr;
 601                        ether3_setbuffer(dev, buffer_read, next_ptr);
 602                        temp_ptr = ether3_readword(dev);
 603                        status = ether3_readword(dev);
 604                        if ((status & (RXSTAT_DONE | RXHDR_CHAINCONTINUE | RXHDR_RECEIVE)) !=
 605                                (RXSTAT_DONE | RXHDR_CHAINCONTINUE) || !temp_ptr)
 606                                break;
 607
 608                        this_ptr = next_ptr + 4;
 609                        next_ptr = ntohs(temp_ptr);
 610                }
 611                ether3_setbuffer(dev, buffer_read, this_ptr);
 612                ether3_readbuffer(dev, addrs+2, 12);
 613
 614if (next_ptr < RX_START || next_ptr >= RX_END) {
 615 int i;
 616 printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head);
 617 printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8);
 618 for (i = 2; i < 14; i++)
 619   printk("%02X ", addrs[i]);
 620 printk("\n");
 621 next_ptr = priv(dev)->rx_head;
 622 break;
 623}
 624                /*
 625                 * ignore our own packets...
 626                 */
 627                if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) &&
 628                    !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) {
 629                        maxcnt ++; /* compensate for loopedback packet */
 630                        ether3_outw(next_ptr >> 8, REG_RECVEND);
 631                } else
 632                if (!(status & (RXSTAT_OVERSIZE|RXSTAT_CRCERROR|RXSTAT_DRIBBLEERROR|RXSTAT_SHORTPACKET))) {
 633                        unsigned int length = next_ptr - this_ptr;
 634                        struct sk_buff *skb;
 635
 636                        if (next_ptr <= this_ptr)
 637                                length += RX_END - RX_START;
 638
 639                        skb = netdev_alloc_skb(dev, length + 2);
 640                        if (skb) {
 641                                unsigned char *buf;
 642
 643                                skb_reserve(skb, 2);
 644                                buf = skb_put(skb, length);
 645                                ether3_readbuffer(dev, buf + 12, length - 12);
 646                                ether3_outw(next_ptr >> 8, REG_RECVEND);
 647                                *(unsigned short *)(buf + 0)    = *(unsigned short *)(addrs + 2);
 648                                *(unsigned long *)(buf + 2)     = *(unsigned long *)(addrs + 4);
 649                                *(unsigned long *)(buf + 6)     = *(unsigned long *)(addrs + 8);
 650                                *(unsigned short *)(buf + 10)   = *(unsigned short *)(addrs + 12);
 651                                skb->protocol = eth_type_trans(skb, dev);
 652                                netif_rx(skb);
 653                                received ++;
 654                        } else {
 655                                ether3_outw(next_ptr >> 8, REG_RECVEND);
 656                                dev->stats.rx_dropped++;
 657                                goto done;
 658                        }
 659                } else {
 660                        struct net_device_stats *stats = &dev->stats;
 661                        ether3_outw(next_ptr >> 8, REG_RECVEND);
 662                        if (status & RXSTAT_OVERSIZE)     stats->rx_over_errors ++;
 663                        if (status & RXSTAT_CRCERROR)     stats->rx_crc_errors ++;
 664                        if (status & RXSTAT_DRIBBLEERROR) stats->rx_fifo_errors ++;
 665                        if (status & RXSTAT_SHORTPACKET)  stats->rx_length_errors ++;
 666                        stats->rx_errors++;
 667                }
 668        }
 669        while (-- maxcnt);
 670
 671done:
 672        dev->stats.rx_packets += received;
 673        priv(dev)->rx_head = next_ptr;
 674        /*
 675         * If rx went off line, then that means that the buffer may be full.  We
 676         * have dropped at least one packet.
 677         */
 678        if (!(ether3_inw(REG_STATUS) & STAT_RXON)) {
 679                dev->stats.rx_dropped++;
 680                ether3_outw(next_ptr, REG_RECVPTR);
 681                ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND);
 682        }
 683
 684        return maxcnt;
 685}
 686
 687/*
 688 * Update stats for the transmitted packet(s)
 689 */
 690static void ether3_tx(struct net_device *dev)
 691{
 692        unsigned int tx_tail = priv(dev)->tx_tail;
 693        int max_work = 14;
 694
 695        do {
 696                unsigned long status;
 697
 698                /*
 699                 * Read the packet header
 700                 */
 701                ether3_setbuffer(dev, buffer_read, tx_tail * 0x600);
 702                status = ether3_readlong(dev);
 703
 704                /*
 705                 * Check to see if this packet has been transmitted
 706                 */
 707                if ((status & (TXSTAT_DONE | TXHDR_TRANSMIT)) !=
 708                    (TXSTAT_DONE | TXHDR_TRANSMIT))
 709                        break;
 710
 711                /*
 712                 * Update errors
 713                 */
 714                if (!(status & (TXSTAT_BABBLED | TXSTAT_16COLLISIONS)))
 715                        dev->stats.tx_packets++;
 716                else {
 717                        dev->stats.tx_errors++;
 718                        if (status & TXSTAT_16COLLISIONS)
 719                                dev->stats.collisions += 16;
 720                        if (status & TXSTAT_BABBLED)
 721                                dev->stats.tx_fifo_errors++;
 722                }
 723
 724                tx_tail = (tx_tail + 1) & 15;
 725        } while (--max_work);
 726
 727        if (priv(dev)->tx_tail != tx_tail) {
 728                priv(dev)->tx_tail = tx_tail;
 729                netif_wake_queue(dev);
 730        }
 731}
 732
 733static void ether3_banner(void)
 734{
 735        static unsigned version_printed = 0;
 736
 737        if (net_debug && version_printed++ == 0)
 738                printk(KERN_INFO "%s", version);
 739}
 740
 741static const struct net_device_ops ether3_netdev_ops = {
 742        .ndo_open               = ether3_open,
 743        .ndo_stop               = ether3_close,
 744        .ndo_start_xmit         = ether3_sendpacket,
 745        .ndo_set_rx_mode        = ether3_setmulticastlist,
 746        .ndo_tx_timeout         = ether3_timeout,
 747        .ndo_validate_addr      = eth_validate_addr,
 748        .ndo_change_mtu         = eth_change_mtu,
 749        .ndo_set_mac_address    = eth_mac_addr,
 750};
 751
 752static int
 753ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
 754{
 755        const struct ether3_data *data = id->data;
 756        struct net_device *dev;
 757        int bus_type, ret;
 758
 759        ether3_banner();
 760
 761        ret = ecard_request_resources(ec);
 762        if (ret)
 763                goto out;
 764
 765        dev = alloc_etherdev(sizeof(struct dev_priv));
 766        if (!dev) {
 767                ret = -ENOMEM;
 768                goto release;
 769        }
 770
 771        SET_NETDEV_DEV(dev, &ec->dev);
 772
 773        priv(dev)->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
 774        if (!priv(dev)->base) {
 775                ret = -ENOMEM;
 776                goto free;
 777        }
 778
 779        ec->irqaddr = priv(dev)->base + data->base_offset;
 780        ec->irqmask = 0xf0;
 781
 782        priv(dev)->seeq = priv(dev)->base + data->base_offset;
 783        dev->irq = ec->irq;
 784
 785        ether3_addr(dev->dev_addr, ec);
 786
 787        init_timer(&priv(dev)->timer);
 788
 789        /* Reset card...
 790         */
 791        ether3_outb(0x80, REG_CONFIG2 + 4);
 792        bus_type = BUS_UNKNOWN;
 793        udelay(4);
 794
 795        /* Test using Receive Pointer (16-bit register) to find out
 796         * how the ether3 is connected to the bus...
 797         */
 798        if (ether3_probe_bus_8(dev, 0x100) &&
 799            ether3_probe_bus_8(dev, 0x201))
 800                bus_type = BUS_8;
 801
 802        if (bus_type == BUS_UNKNOWN &&
 803            ether3_probe_bus_16(dev, 0x101) &&
 804            ether3_probe_bus_16(dev, 0x201))
 805                bus_type = BUS_16;
 806
 807        switch (bus_type) {
 808        case BUS_UNKNOWN:
 809                printk(KERN_ERR "%s: unable to identify bus width\n", dev->name);
 810                ret = -ENODEV;
 811                goto free;
 812
 813        case BUS_8:
 814                printk(KERN_ERR "%s: %s found, but is an unsupported "
 815                        "8-bit card\n", dev->name, data->name);
 816                ret = -ENODEV;
 817                goto free;
 818
 819        default:
 820                break;
 821        }
 822
 823        if (ether3_init_2(dev)) {
 824                ret = -ENODEV;
 825                goto free;
 826        }
 827
 828        dev->netdev_ops         = &ether3_netdev_ops;
 829        dev->watchdog_timeo     = 5 * HZ / 100;
 830
 831        ret = register_netdev(dev);
 832        if (ret)
 833                goto free;
 834
 835        printk("%s: %s in slot %d, %pM\n",
 836               dev->name, data->name, ec->slot_no, dev->dev_addr);
 837
 838        ecard_set_drvdata(ec, dev);
 839        return 0;
 840
 841 free:
 842        free_netdev(dev);
 843 release:
 844        ecard_release_resources(ec);
 845 out:
 846        return ret;
 847}
 848
 849static void ether3_remove(struct expansion_card *ec)
 850{
 851        struct net_device *dev = ecard_get_drvdata(ec);
 852
 853        ecard_set_drvdata(ec, NULL);
 854
 855        unregister_netdev(dev);
 856        free_netdev(dev);
 857        ecard_release_resources(ec);
 858}
 859
 860static struct ether3_data ether3 = {
 861        .name           = "ether3",
 862        .base_offset    = 0,
 863};
 864
 865static struct ether3_data etherb = {
 866        .name           = "etherb",
 867        .base_offset    = 0x800,
 868};
 869
 870static const struct ecard_id ether3_ids[] = {
 871        { MANU_ANT2, PROD_ANT_ETHER3, &ether3 },
 872        { MANU_ANT,  PROD_ANT_ETHER3, &ether3 },
 873        { MANU_ANT,  PROD_ANT_ETHERB, &etherb },
 874        { 0xffff, 0xffff }
 875};
 876
 877static struct ecard_driver ether3_driver = {
 878        .probe          = ether3_probe,
 879        .remove         = ether3_remove,
 880        .id_table       = ether3_ids,
 881        .drv = {
 882                .name   = "ether3",
 883        },
 884};
 885
 886static int __init ether3_init(void)
 887{
 888        return ecard_register_driver(&ether3_driver);
 889}
 890
 891static void __exit ether3_exit(void)
 892{
 893        ecard_remove_driver(&ether3_driver);
 894}
 895
 896module_init(ether3_init);
 897module_exit(ether3_exit);
 898
 899MODULE_LICENSE("GPL");
 900