LXR linux/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h

   1/******************************************************************************
   2 *
   3 * Copyright(c) 2009-2012  Realtek Corporation.
   4 *
   5 * This program is free software; you can redistribute it and/or modify it
   6 * under the terms of version 2 of the GNU General Public License as
   7 * published by the Free Software Foundation.
   8 *
   9 * This program is distributed in the hope that it will be useful, but WITHOUT
  10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12 * more details.
  13 *
  14 * The full GNU General Public License is included in this distribution in the
  15 * file called LICENSE.
  16 *
  17 * Contact Information:
  18 * wlanfae <wlanfae@realtek.com>
  19 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  20 * Hsinchu 300, Taiwan.
  21 *
  22 * Larry Finger <Larry.Finger@lwfinger.net>
  23 *
  24 *****************************************************************************/
  25
  26#ifndef __RTL8723E_PWRSEQ_H__
  27#define __RTL8723E_PWRSEQ_H__
  28
  29#include "../pwrseqcmd.h"
  30/*
  31 *      Check document WM-20110607-Paul-RTL8723A_Power_Architecture-R02.vsd
  32 *      There are 6 HW Power States:
  33 *      0: POFF--Power Off
  34 *      1: PDN--Power Down
  35 *      2: CARDEMU--Card Emulation
  36 *      3: ACT--Active Mode
  37 *      4: LPS--Low Power State
  38 *      5: SUS--Suspend
  39 *
  40 *      The transision from different states are defined below
  41 *      TRANS_CARDEMU_TO_ACT
  42 *      TRANS_ACT_TO_CARDEMU
  43 *      TRANS_CARDEMU_TO_SUS
  44 *      TRANS_SUS_TO_CARDEMU
  45 *      TRANS_CARDEMU_TO_PDN
  46 *      TRANS_ACT_TO_LPS
  47 *      TRANS_LPS_TO_ACT
  48 *
  49 *      TRANS_END
  50 */
  51
  52#define RTL8723A_TRANS_CARDEMU_TO_ACT_STEPS     10
  53#define RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS     10
  54#define RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS     10
  55#define RTL8723A_TRANS_SUS_TO_CARDEMU_STEPS     10
  56#define RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS     10
  57#define RTL8723A_TRANS_PDN_TO_CARDEMU_STEPS     10
  58#define RTL8723A_TRANS_ACT_TO_LPS_STEPS         15
  59#define RTL8723A_TRANS_LPS_TO_ACT_STEPS         15
  60#define RTL8723A_TRANS_END_STEPS                1
  61
  62/* format */
  63/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }*/
  64
  65#define RTL8723A_TRANS_CARDEMU_TO_ACT   \
  66        /* disable SW LPS 0x04[10]=0*/  \
  67        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  68                PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(2), 0},\
  69        /* wait till 0x04[17] = 1    power ready*/      \
  70        {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  71                PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},\
  72        /* release WLON reset  0x04[16]=1*/     \
  73        {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  74                PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},\
  75        /* disable HWPDN 0x04[15]=0*/ \
  76        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  77                PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},\
  78        /* disable WL suspend*/ \
  79        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  80                PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0},\
  81        /* polling until return 0*/ \
  82        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  83                PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},\
  84        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  85                PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0},
  86
  87/* format */
  88/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */
  89
  90#define RTL8723A_TRANS_ACT_TO_CARDEMU   \
  91        /*0x1F[7:0] = 0 turn off RF*/ \
  92        {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  93                PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},      \
  94        {0x004E, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  95                PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},\
  96        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  97                PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
  98        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
  99                PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0},
 100
 101/* format */
 102/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/
 103#define RTL8723A_TRANS_CARDEMU_TO_SUS                   \
 104                /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/      \
 105        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
 106                PWR_BASEADDR_MAC, PWR_CMD_WRITE, \
 107                BIT(4)|BIT(3), (BIT(4)|BIT(3))},\
 108/*0x04[12:11] = 2b'01 enable WL suspend*/       \
 109        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK| \
 110                PWR_INTF_SDIO_MSK,\
 111                PWR_BASEADDR_MAC, \
 112                PWR_CMD_WRITE, \
 113                BIT(3)|BIT(4), BIT(3)}, \
 114/*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \
 115        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 116                PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, \
 117                PWR_CMD_WRITE, BIT(3)|BIT(4), \
 118                BIT(3)|BIT(4)}, \
 119/*Set SDIO suspend local register*/     \
 120        {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 121                PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\
 122                PWR_CMD_WRITE, BIT(0), BIT(0)}, \
 123/*wait power state to suspend*/ \
 124        {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 125                PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\
 126                PWR_CMD_POLLING, BIT(1), 0},
 127
 128/* format */
 129/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */
 130
 131#define RTL8723A_TRANS_SUS_TO_CARDEMU   \
 132 /*Set SDIO suspend local register*/    \
 133        {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
 134                PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0},\
 135 /*wait power state to suspend*/ \
 136        {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
 137                PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)},\
 138 /*0x04[12:11] = 2b'01enable WL suspend*/ \
 139        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
 140                PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0},
 141
 142/* format */
 143/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */
 144
 145#define RTL8723A_TRANS_CARDEMU_TO_CARDDIS \
 146 /*0x04[12:11] = 2b'01 enable WL suspend*/       \
 147        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 148                PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
 149                PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
 150/*0x04[10] = 1, enable SW LPS*/ \
 151        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 152                PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC,\
 153                PWR_CMD_WRITE, BIT(2), BIT(2)}, \
 154/*Set SDIO suspend local register*/ \
 155        {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 156                PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\
 157                PWR_CMD_WRITE, BIT(0), BIT(0)}, \
 158 /*wait power state to suspend*/ \
 159        {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 160                PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\
 161                PWR_CMD_POLLING, BIT(1), 0},
 162
 163/* format */
 164/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */
 165
 166#define RTL8723A_TRANS_CARDDIS_TO_CARDEMU\
 167/*Set SDIO suspend local register*/     \
 168        {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 169                PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\
 170                PWR_CMD_WRITE, BIT(0), 0}, \
 171 /*wait power state to suspend*/ \
 172        {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 173                PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\
 174                PWR_CMD_POLLING, BIT(1), BIT(1)},\
 175 /*0x04[12:11] = 2b'00enable WL suspend*/ \
 176        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 177                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 178                PWR_CMD_WRITE, BIT(3)|BIT(4), 0},\
 179/*PCIe DMA start*/ \
 180        {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 181                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 182                PWR_CMD_WRITE, 0xFF, 0},
 183
 184/* format */
 185/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */
 186#define RTL8723A_TRANS_CARDEMU_TO_PDN   \
 187        {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 188                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 189                PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/\
 190        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 191                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 192                PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/
 193
 194/* format */
 195/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */
 196#define RTL8723A_TRANS_PDN_TO_CARDEMU   \
 197        {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 198                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 199                PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/
 200
 201/* format */
 202/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */
 203
 204#define RTL8723A_TRANS_ACT_TO_LPS       \
 205        {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 206                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 207                PWR_CMD_WRITE, 0xFF, 0xFF},/*PCIe DMA stop*/    \
 208        {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 209                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 210                PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
 211        /*Should be zero if no packet is transmitting*/ \
 212        {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 213                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 214                PWR_CMD_POLLING, 0xFF, 0},\
 215        /*Should be zero if no packet is transmitting*/ \
 216        {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 217                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 218                PWR_CMD_POLLING, 0xFF, 0},\
 219        /*Should be zero if no packet is transmitting*/ \
 220        {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 221                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 222                PWR_CMD_POLLING, 0xFF, 0},\
 223        /*Should be zero if no packet is transmitting*/ \
 224        {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 225                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 226                PWR_CMD_POLLING, 0xFF, 0},\
 227        /*CCK and OFDM are disabled,and clock are gated*/ \
 228        {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 229                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 230                PWR_CMD_WRITE, BIT(0), 0},\
 231        {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 232                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 233                PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/\
 234        {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 235                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 236                PWR_CMD_WRITE, BIT(1), 0},/*Whole BB is reset*/ \
 237        {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 238                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 239                PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/    \
 240        {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 241                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 242                PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/    \
 243        /*Respond TxOK to scheduler*/   \
 244        {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 245                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 246                PWR_CMD_WRITE, BIT(5), BIT(5)},\
 247
 248#define RTL8723A_TRANS_LPS_TO_ACT\
 249/* format */    \
 250/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ \
 251        {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 252                PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\
 253                PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/\
 254        {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 255                PWR_INTF_USB_MSK, PWR_BASEADDR_MAC,\
 256                PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/\
 257        {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 258                PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC,\
 259                PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/\
 260        {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 261                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 262                PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/\
 263        /*.     0x08[4] = 0              switch TSF to 40M*/\
 264        {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 265                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 266                PWR_CMD_WRITE, BIT(4), 0},  \
 267        /*Polling 0x109[7]=0  TSF in 40M*/\
 268        {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 269                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 270                PWR_CMD_POLLING, BIT(7), 0}, \
 271        /*.     0x29[7:6] = 2b'00        enable BB clock*/\
 272        {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 273                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 274                PWR_CMD_WRITE, BIT(6)|BIT(7), 0},\
 275         /*.    0x101[1] = 1*/\
 276        {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 277                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 278                PWR_CMD_WRITE, BIT(1), BIT(1)},\
 279         /*.    0x100[7:0] = 0xFF        enable WMAC TRX*/\
 280        {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 281                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 282                PWR_CMD_WRITE, 0xFF, 0xFF},\
 283         /*.    0x02[1:0] = 2b'11        enable BB macro*/\
 284        {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 285                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 286                PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)},\
 287        {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
 288                PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\
 289                PWR_CMD_WRITE, 0xFF, 0}, /*.    0x522 = 0*/
 290
 291/* format */
 292/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */
 293
 294#define RTL8723A_TRANS_END \
 295        {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
 296        0, PWR_CMD_END, 0, 0}
 297
 298extern struct wlan_pwr_cfg rtl8723A_power_on_flow
 299                [RTL8723A_TRANS_CARDEMU_TO_ACT_STEPS +
 300                 RTL8723A_TRANS_END_STEPS];
 301extern struct wlan_pwr_cfg rtl8723A_radio_off_flow
 302                [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
 303                 RTL8723A_TRANS_END_STEPS];
 304extern struct wlan_pwr_cfg rtl8723A_card_disable_flow
 305                [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
 306                 RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS +
 307                 RTL8723A_TRANS_END_STEPS];
 308extern struct wlan_pwr_cfg rtl8723A_card_enable_flow
 309                [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
 310                 RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS +
 311                 RTL8723A_TRANS_END_STEPS];
 312extern struct wlan_pwr_cfg rtl8723A_suspend_flow
 313                [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
 314                 RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS +
 315                 RTL8723A_TRANS_END_STEPS];
 316extern struct wlan_pwr_cfg rtl8723A_resume_flow
 317                [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
 318                 RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS +
 319                 RTL8723A_TRANS_END_STEPS];
 320extern struct wlan_pwr_cfg rtl8723A_hwpdn_flow
 321                [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
 322                 RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS +
 323                 RTL8723A_TRANS_END_STEPS];
 324extern struct wlan_pwr_cfg rtl8723A_enter_lps_flow
 325                [RTL8723A_TRANS_ACT_TO_LPS_STEPS + RTL8723A_TRANS_END_STEPS];
 326extern struct wlan_pwr_cfg rtl8723A_leave_lps_flow
 327                [RTL8723A_TRANS_LPS_TO_ACT_STEPS + RTL8723A_TRANS_END_STEPS];
 328
 329/* RTL8723 Power Configuration CMDs for PCIe interface */
 330#define Rtl8723_NIC_PWR_ON_FLOW         rtl8723A_power_on_flow
 331#define Rtl8723_NIC_RF_OFF_FLOW         rtl8723A_radio_off_flow
 332#define Rtl8723_NIC_DISABLE_FLOW        rtl8723A_card_disable_flow
 333#define Rtl8723_NIC_ENABLE_FLOW         rtl8723A_card_enable_flow
 334#define Rtl8723_NIC_SUSPEND_FLOW        rtl8723A_suspend_flow
 335#define Rtl8723_NIC_RESUME_FLOW         rtl8723A_resume_flow
 336#define Rtl8723_NIC_PDN_FLOW            rtl8723A_hwpdn_flow
 337#define Rtl8723_NIC_LPS_ENTER_FLOW      rtl8723A_enter_lps_flow
 338#define Rtl8723_NIC_LPS_LEAVE_FLOW      rtl8723A_leave_lps_flow
 339
 340#endif
 341