1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22#define NCR53C406A_DEBUG 0
23#define VERBOSE_NCR53C406A_DEBUG 0
24
25
26#define USE_PIO 1
27
28#define USE_BIOS 0
29
30
31
32#define DMA_CHAN 5
33
34
35
36#define USE_FAST_PIO 1
37
38
39
40#include <linux/module.h>
41
42#include <linux/errno.h>
43#include <linux/ioport.h>
44#include <linux/interrupt.h>
45#include <linux/proc_fs.h>
46#include <linux/stat.h>
47#include <linux/init.h>
48#include <linux/bitops.h>
49#include <asm/io.h>
50#include <asm/dma.h>
51#include <asm/irq.h>
52
53#include <linux/blkdev.h>
54#include <linux/spinlock.h>
55#include "scsi.h"
56#include <scsi/scsi_host.h>
57
58
59
60#define WATCHDOG 5000000
61
62#define SYNC_MODE 0
63
64#ifdef DEBUG
65#undef NCR53C406A_DEBUG
66#define NCR53C406A_DEBUG 1
67#endif
68
69#if USE_PIO
70#define USE_DMA 0
71#else
72#define USE_DMA 1
73#endif
74
75
76#define C1_IMG 0x07
77#define C2_IMG 0x48
78#if USE_DMA
79#define C3_IMG 0x21
80#else
81#define C3_IMG 0x20
82#endif
83#define C4_IMG 0x04
84#define C5_IMG 0xb6
85
86#define REG0 (outb(C4_IMG, CONFIG4))
87#define REG1 (outb(C5_IMG, CONFIG5))
88
89#if NCR53C406A_DEBUG
90#define DEB(x) x
91#else
92#define DEB(x)
93#endif
94
95#if VERBOSE_NCR53C406A_DEBUG
96#define VDEB(x) x
97#else
98#define VDEB(x)
99#endif
100
101#define LOAD_DMA_COUNT(count) \
102 outb(count & 0xff, TC_LSB); \
103 outb((count >> 8) & 0xff, TC_MSB); \
104 outb((count >> 16) & 0xff, TC_HIGH);
105
106
107#define DMA_OP 0x80
108
109#define SCSI_NOP 0x00
110#define FLUSH_FIFO 0x01
111#define CHIP_RESET 0x02
112#define SCSI_RESET 0x03
113#define RESELECT 0x40
114#define SELECT_NO_ATN 0x41
115#define SELECT_ATN 0x42
116#define SELECT_ATN_STOP 0x43
117#define ENABLE_SEL 0x44
118#define DISABLE_SEL 0x45
119#define SELECT_ATN3 0x46
120#define RESELECT3 0x47
121#define TRANSFER_INFO 0x10
122#define INIT_CMD_COMPLETE 0x11
123#define MSG_ACCEPT 0x12
124#define TRANSFER_PAD 0x18
125#define SET_ATN 0x1a
126#define RESET_ATN 0x1b
127#define SEND_MSG 0x20
128#define SEND_STATUS 0x21
129#define SEND_DATA 0x22
130#define DISCONN_SEQ 0x23
131#define TERMINATE_SEQ 0x24
132#define TARG_CMD_COMPLETE 0x25
133#define DISCONN 0x27
134#define RECV_MSG 0x28
135#define RECV_CMD 0x29
136#define RECV_DATA 0x2a
137#define RECV_CMD_SEQ 0x2b
138#define TARGET_ABORT_DMA 0x04
139
140
141
142
143
144
145
146
147
148
149
150
151
152#if NCR53C406A_DEBUG
153#define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);}
154#else
155#define rtrc(i) {}
156#endif
157
158
159enum Phase {
160 idle,
161 data_out,
162 data_in,
163 command_ph,
164 status_ph,
165 message_out,
166 message_in
167};
168
169
170static void NCR53c406a_intr(void *);
171static irqreturn_t do_NCR53c406a_intr(int, void *);
172static void chip_init(void);
173static void calc_port_addr(void);
174#ifndef IRQ_LEV
175static int irq_probe(void);
176#endif
177
178
179
180#if USE_BIOS
181static void *bios_base;
182#endif
183
184#ifdef PORT_BASE
185static int port_base = PORT_BASE;
186#else
187static int port_base;
188#endif
189
190#ifdef IRQ_LEV
191static int irq_level = IRQ_LEV;
192#else
193static int irq_level = -1;
194#endif
195
196#if USE_DMA
197static int dma_chan;
198#endif
199
200#if USE_PIO
201static int fast_pio = USE_FAST_PIO;
202#endif
203
204static Scsi_Cmnd *current_SC;
205static char info_msg[256];
206
207
208
209
210#if USE_BIOS
211static void *addresses[] = {
212 (void *) 0xd8000,
213 (void *) 0xc8000
214};
215#define ADDRESS_COUNT ARRAY_SIZE(addresses)
216#endif
217
218
219static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 };
220#define PORT_COUNT ARRAY_SIZE(ports)
221
222#ifndef MODULE
223
224static unsigned short intrs[] = { 10, 11, 12, 15 };
225#define INTR_COUNT ARRAY_SIZE(intrs)
226#endif
227
228
229#if USE_BIOS
230struct signature {
231 char *signature;
232 int sig_offset;
233 int sig_length;
234} signatures[] __initdata = {
235
236
237 {
238"Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82},};
239
240#define SIGNATURE_COUNT ARRAY_SIZE(signatures)
241#endif
242
243
244
245
246static int TC_LSB;
247static int TC_MSB;
248static int SCSI_FIFO;
249static int CMD_REG;
250static int STAT_REG;
251static int DEST_ID;
252static int INT_REG;
253static int SRTIMOUT;
254static int SEQ_REG;
255static int SYNCPRD;
256static int FIFO_FLAGS;
257static int SYNCOFF;
258static int CONFIG1;
259static int CLKCONV;
260
261static int CONFIG2;
262static int CONFIG3;
263static int CONFIG4;
264static int TC_HIGH;
265
266
267
268
269
270
271static int PIO_FIFO;
272
273
274
275static int PIO_STATUS;
276
277
278static int PIO_FLAG;
279static int CONFIG5;
280
281
282
283
284
285#if USE_DMA
286static __inline__ int NCR53c406a_dma_setup(unsigned char *ptr, unsigned int count, unsigned char mode)
287{
288 unsigned limit;
289 unsigned long flags = 0;
290
291 VDEB(printk("dma: before count=%d ", count));
292 if (dma_chan <= 3) {
293 if (count > 65536)
294 count = 65536;
295 limit = 65536 - (((unsigned) ptr) & 0xFFFF);
296 } else {
297 if (count > (65536 << 1))
298 count = (65536 << 1);
299 limit = (65536 << 1) - (((unsigned) ptr) & 0x1FFFF);
300 }
301
302 if (count > limit)
303 count = limit;
304
305 VDEB(printk("after count=%d\n", count));
306 if ((count & 1) || (((unsigned) ptr) & 1))
307 panic("NCR53c406a: attempted unaligned DMA transfer\n");
308
309 flags = claim_dma_lock();
310 disable_dma(dma_chan);
311 clear_dma_ff(dma_chan);
312 set_dma_addr(dma_chan, (long) ptr);
313 set_dma_count(dma_chan, count);
314 set_dma_mode(dma_chan, mode);
315 enable_dma(dma_chan);
316 release_dma_lock(flags);
317
318 return count;
319}
320
321static __inline__ int NCR53c406a_dma_write(unsigned char *src, unsigned int count)
322{
323 return NCR53c406a_dma_setup(src, count, DMA_MODE_WRITE);
324}
325
326static __inline__ int NCR53c406a_dma_read(unsigned char *src, unsigned int count)
327{
328 return NCR53c406a_dma_setup(src, count, DMA_MODE_READ);
329}
330
331static __inline__ int NCR53c406a_dma_residual(void)
332{
333 register int tmp;
334 unsigned long flags;
335
336 flags = claim_dma_lock();
337 clear_dma_ff(dma_chan);
338 tmp = get_dma_residue(dma_chan);
339 release_dma_lock(flags);
340
341 return tmp;
342}
343#endif
344
345#if USE_PIO
346static __inline__ int NCR53c406a_pio_read(unsigned char *request, unsigned int reqlen)
347{
348 int i;
349 int len;
350
351 REG1;
352 while (reqlen) {
353 i = inb(PIO_STATUS);
354
355 if (i & 0x80)
356 return 0;
357
358 switch (i & 0x1e) {
359 default:
360 case 0x10:
361 len = 0;
362 break;
363 case 0x0:
364 len = 1;
365 break;
366 case 0x8:
367 len = 42;
368 break;
369 case 0xc:
370 len = 84;
371 break;
372 case 0xe:
373 len = 128;
374 break;
375 }
376
377 if ((i & 0x40) && len == 0) {
378 return 0;
379 }
380
381 if (len) {
382 if (len > reqlen)
383 len = reqlen;
384
385 if (fast_pio && len > 3) {
386 insl(PIO_FIFO, request, len >> 2);
387 request += len & 0xfc;
388 reqlen -= len & 0xfc;
389 } else {
390 while (len--) {
391 *request++ = inb(PIO_FIFO);
392 reqlen--;
393 }
394 }
395 }
396 }
397 return 0;
398}
399
400static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int reqlen)
401{
402 int i = 0;
403 int len;
404
405 REG1;
406 while (reqlen && !(i & 0x40)) {
407 i = inb(PIO_STATUS);
408
409 if (i & 0x80)
410 return 0;
411
412 switch (i & 0x1e) {
413 case 0x10:
414 len = 128;
415 break;
416 case 0x0:
417 len = 84;
418 break;
419 case 0x8:
420 len = 42;
421 break;
422 case 0xc:
423 len = 1;
424 break;
425 default:
426 case 0xe:
427 len = 0;
428 break;
429 }
430
431 if (len) {
432 if (len > reqlen)
433 len = reqlen;
434
435 if (fast_pio && len > 3) {
436 outsl(PIO_FIFO, request, len >> 2);
437 request += len & 0xfc;
438 reqlen -= len & 0xfc;
439 } else {
440 while (len--) {
441 outb(*request++, PIO_FIFO);
442 reqlen--;
443 }
444 }
445 }
446 }
447 return 0;
448}
449#endif
450
451static int __init NCR53c406a_detect(struct scsi_host_template * tpnt)
452{
453 int present = 0;
454 struct Scsi_Host *shpnt = NULL;
455#ifndef PORT_BASE
456 int i;
457#endif
458
459#if USE_BIOS
460 int ii, jj;
461 bios_base = 0;
462
463 for (ii = 0; ii < ADDRESS_COUNT && !bios_base; ii++)
464 for (jj = 0; (jj < SIGNATURE_COUNT) && !bios_base; jj++)
465 if (!memcmp((void *) addresses[ii] + signatures[jj].sig_offset, (void *) signatures[jj].signature, (int) signatures[jj].sig_length))
466 bios_base = addresses[ii];
467
468 if (!bios_base) {
469 printk("NCR53c406a: BIOS signature not found\n");
470 return 0;
471 }
472
473 DEB(printk("NCR53c406a BIOS found at 0x%x\n", (unsigned int) bios_base);
474 );
475#endif
476
477#ifdef PORT_BASE
478 if (!request_region(port_base, 0x10, "NCR53c406a"))
479 port_base = 0;
480
481#else
482 if (port_base) {
483 if (!request_region(port_base, 0x10, "NCR53c406a"))
484 port_base = 0;
485 } else {
486 for (i = 0; i < PORT_COUNT && !port_base; i++) {
487 if (!request_region(ports[i], 0x10, "NCR53c406a")) {
488 DEB(printk("NCR53c406a: port 0x%x in use\n", ports[i]));
489 } else {
490 VDEB(printk("NCR53c406a: port 0x%x available\n", ports[i]));
491 outb(C5_IMG, ports[i] + 0x0d);
492 if ((inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) & 0xf8) == 0x58) {
493 port_base = ports[i];
494 VDEB(printk("NCR53c406a: Sig register valid\n"));
495 VDEB(printk("port_base=0x%x\n", port_base));
496 break;
497 }
498 release_region(ports[i], 0x10);
499 }
500 }
501 }
502#endif
503
504 if (!port_base) {
505 printk("NCR53c406a: no available ports found\n");
506 return 0;
507 }
508
509 DEB(printk("NCR53c406a detected\n"));
510
511 calc_port_addr();
512 chip_init();
513
514#ifndef IRQ_LEV
515 if (irq_level < 0) {
516 irq_level = irq_probe();
517 if (irq_level < 0) {
518 printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level);
519 goto err_release;
520 }
521 }
522#endif
523
524 DEB(printk("NCR53c406a: using port_base 0x%x\n", port_base));
525
526 present = 1;
527 tpnt->proc_name = "NCR53c406a";
528
529 shpnt = scsi_register(tpnt, 0);
530 if (!shpnt) {
531 printk("NCR53c406a: Unable to register host, giving up.\n");
532 goto err_release;
533 }
534
535 if (irq_level > 0) {
536 if (request_irq(irq_level, do_NCR53c406a_intr, 0, "NCR53c406a", shpnt)) {
537 printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level);
538 goto err_free_scsi;
539 }
540 tpnt->can_queue = 1;
541 DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level));
542 } else if (irq_level == 0) {
543 tpnt->can_queue = 0;
544 DEB(printk("NCR53c406a: No interrupts detected\n"));
545 printk("NCR53c406a driver no longer supports polling interface\n");
546 printk("Please email linux-scsi@vger.kernel.org\n");
547
548#if USE_DMA
549 printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");
550#endif
551 goto err_free_scsi;
552 } else {
553 DEB(printk("NCR53c406a: Shouldn't get here!\n"));
554 goto err_free_scsi;
555 }
556
557#if USE_DMA
558 dma_chan = DMA_CHAN;
559 if (request_dma(dma_chan, "NCR53c406a") != 0) {
560 printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan);
561 goto err_free_irq;
562 }
563
564 DEB(printk("Allocated DMA channel %d\n", dma_chan));
565#endif
566
567 shpnt->irq = irq_level;
568 shpnt->io_port = port_base;
569 shpnt->n_io_port = 0x10;
570#if USE_DMA
571 shpnt->dma = dma_chan;
572#endif
573
574#if USE_DMA
575 sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", port_base, irq_level, dma_chan);
576#else
577 sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", port_base, irq_level, fast_pio ? "fast" : "slow");
578#endif
579
580 return (present);
581
582#if USE_DMA
583 err_free_irq:
584 if (irq_level)
585 free_irq(irq_level, shpnt);
586#endif
587 err_free_scsi:
588 scsi_unregister(shpnt);
589 err_release:
590 release_region(port_base, 0x10);
591 return 0;
592}
593
594static int NCR53c406a_release(struct Scsi_Host *shost)
595{
596 if (shost->irq)
597 free_irq(shost->irq, NULL);
598#if USE_DMA
599 if (shost->dma_channel != 0xff)
600 free_dma(shost->dma_channel);
601#endif
602 if (shost->io_port && shost->n_io_port)
603 release_region(shost->io_port, shost->n_io_port);
604
605 scsi_unregister(shost);
606 return 0;
607}
608
609#ifndef MODULE
610
611static int __init NCR53c406a_setup(char *str)
612{
613 static size_t setup_idx = 0;
614 size_t i;
615 int ints[4];
616
617 DEB(printk("NCR53c406a: Setup called\n");
618 );
619
620 if (setup_idx >= PORT_COUNT - 1) {
621 printk("NCR53c406a: Setup called too many times. Bad LILO params?\n");
622 return 0;
623 }
624 get_options(str, 4, ints);
625 if (ints[0] < 1 || ints[0] > 3) {
626 printk("NCR53c406a: Malformed command line\n");
627 printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n");
628 return 0;
629 }
630 for (i = 0; i < PORT_COUNT && !port_base; i++)
631 if (ports[i] == ints[1]) {
632 port_base = ints[1];
633 DEB(printk("NCR53c406a: Specified port_base 0x%x\n", port_base);
634 )
635 }
636 if (!port_base) {
637 printk("NCR53c406a: Invalid PORTBASE 0x%x specified\n", ints[1]);
638 return 0;
639 }
640
641 if (ints[0] > 1) {
642 if (ints[2] == 0) {
643 irq_level = 0;
644 DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);
645 )
646 } else
647 for (i = 0; i < INTR_COUNT && irq_level < 0; i++)
648 if (intrs[i] == ints[2]) {
649 irq_level = ints[2];
650 DEB(printk("NCR53c406a: Specified irq %d\n", port_base);
651 )
652 }
653 if (irq_level < 0)
654 printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]);
655 }
656
657 if (ints[0] > 2)
658 fast_pio = ints[3];
659
660 DEB(printk("NCR53c406a: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);)
661 return 1;
662}
663
664__setup("ncr53c406a=", NCR53c406a_setup);
665
666#endif
667
668static const char *NCR53c406a_info(struct Scsi_Host *SChost)
669{
670 DEB(printk("NCR53c406a_info called\n"));
671 return (info_msg);
672}
673
674#if 0
675static void wait_intr(void)
676{
677 unsigned long i = jiffies + WATCHDOG;
678
679 while (time_after(i, jiffies) && !(inb(STAT_REG) & 0xe0)) {
680 cpu_relax();
681 barrier();
682 }
683
684 if (time_before_eq(i, jiffies)) {
685 rtrc(0);
686 current_SC->result = DID_TIME_OUT << 16;
687 current_SC->SCp.phase = idle;
688 current_SC->scsi_done(current_SC);
689 return;
690 }
691
692 NCR53c406a_intr(NULL);
693}
694#endif
695
696static int NCR53c406a_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
697{
698 int i;
699
700 VDEB(printk("NCR53c406a_queue called\n"));
701 DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->device->target, (u8)SCpnt->device->lun, scsi_bufflen(SCpnt)));
702
703#if 0
704 VDEB(for (i = 0; i < SCpnt->cmd_len; i++)
705 printk("cmd[%d]=%02x ", i, SCpnt->cmnd[i]));
706 VDEB(printk("\n"));
707#endif
708
709 current_SC = SCpnt;
710 current_SC->scsi_done = done;
711 current_SC->SCp.phase = command_ph;
712 current_SC->SCp.Status = 0;
713 current_SC->SCp.Message = 0;
714
715
716 REG0;
717 outb(scmd_id(SCpnt), DEST_ID);
718 outb(FLUSH_FIFO, CMD_REG);
719
720 for (i = 0; i < SCpnt->cmd_len; i++) {
721 outb(SCpnt->cmnd[i], SCSI_FIFO);
722 }
723 outb(SELECT_NO_ATN, CMD_REG);
724
725 rtrc(1);
726 return 0;
727}
728
729static DEF_SCSI_QCMD(NCR53c406a_queue)
730
731static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
732{
733 DEB(printk("NCR53c406a_reset called\n"));
734
735 spin_lock_irq(SCpnt->device->host->host_lock);
736
737 outb(C4_IMG, CONFIG4);
738 outb(CHIP_RESET, CMD_REG);
739 outb(SCSI_NOP, CMD_REG);
740 outb(SCSI_RESET, CMD_REG);
741 chip_init();
742
743 rtrc(2);
744
745 spin_unlock_irq(SCpnt->device->host->host_lock);
746
747 return SUCCESS;
748}
749
750static int NCR53c406a_biosparm(struct scsi_device *disk,
751 struct block_device *dev,
752 sector_t capacity, int *info_array)
753{
754 int size;
755
756 DEB(printk("NCR53c406a_biosparm called\n"));
757
758 size = capacity;
759 info_array[0] = 64;
760 info_array[1] = 32;
761 info_array[2] = size >> 11;
762 if (info_array[2] > 1024) {
763 info_array[0] = 255;
764 info_array[1] = 63;
765 info_array[2] = size / (255 * 63);
766 }
767 return 0;
768}
769
770static irqreturn_t do_NCR53c406a_intr(int unused, void *dev_id)
771{
772 unsigned long flags;
773 struct Scsi_Host *dev = dev_id;
774
775 spin_lock_irqsave(dev->host_lock, flags);
776 NCR53c406a_intr(dev_id);
777 spin_unlock_irqrestore(dev->host_lock, flags);
778 return IRQ_HANDLED;
779}
780
781static void NCR53c406a_intr(void *dev_id)
782{
783 DEB(unsigned char fifo_size;
784 )
785 DEB(unsigned char seq_reg;
786 )
787 unsigned char status, int_reg;
788#if USE_PIO
789 unsigned char pio_status;
790 struct scatterlist *sg;
791 int i;
792#endif
793
794 VDEB(printk("NCR53c406a_intr called\n"));
795
796#if USE_PIO
797 REG1;
798 pio_status = inb(PIO_STATUS);
799#endif
800 REG0;
801 status = inb(STAT_REG);
802 DEB(seq_reg = inb(SEQ_REG));
803 int_reg = inb(INT_REG);
804 DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f);
805
806#if NCR53C406A_DEBUG
807 printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", status, seq_reg, int_reg, fifo_size);
808#if (USE_DMA)
809 printk("\n");
810#else
811 printk(", pio=%02x\n", pio_status);
812#endif
813#endif
814
815 if (int_reg & 0x80) {
816 rtrc(3);
817 DEB(printk("NCR53c406a: reset intr received\n"));
818 current_SC->SCp.phase = idle;
819 current_SC->result = DID_RESET << 16;
820 current_SC->scsi_done(current_SC);
821 return;
822 }
823#if USE_PIO
824 if (pio_status & 0x80) {
825 printk("NCR53C406A: Warning: PIO error!\n");
826 current_SC->SCp.phase = idle;
827 current_SC->result = DID_ERROR << 16;
828 current_SC->scsi_done(current_SC);
829 return;
830 }
831#endif
832
833 if (status & 0x20) {
834 printk("NCR53c406a: Warning: parity error!\n");
835 current_SC->SCp.phase = idle;
836 current_SC->result = DID_PARITY << 16;
837 current_SC->scsi_done(current_SC);
838 return;
839 }
840
841 if (status & 0x40) {
842 printk("NCR53c406a: Warning: gross error!\n");
843 current_SC->SCp.phase = idle;
844 current_SC->result = DID_ERROR << 16;
845 current_SC->scsi_done(current_SC);
846 return;
847 }
848
849 if (int_reg & 0x20) {
850 DEB(printk("NCR53c406a: disconnect intr received\n"));
851 if (current_SC->SCp.phase != message_in) {
852 current_SC->result = DID_NO_CONNECT << 16;
853 } else {
854 current_SC->result = (current_SC->SCp.Status & 0xff)
855 | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16);
856 }
857
858 rtrc(0);
859 current_SC->SCp.phase = idle;
860 current_SC->scsi_done(current_SC);
861 return;
862 }
863
864 switch (status & 0x07) {
865 case 0x00:
866 if (int_reg & 0x10) {
867 rtrc(5);
868 current_SC->SCp.phase = data_out;
869 VDEB(printk("NCR53c406a: Data-Out phase\n"));
870 outb(FLUSH_FIFO, CMD_REG);
871 LOAD_DMA_COUNT(scsi_bufflen(current_SC));
872#if USE_DMA
873 NCR53c406a_dma_write(scsi_sglist(current_SC),
874 scsdi_bufflen(current_SC));
875
876#endif
877 outb(TRANSFER_INFO | DMA_OP, CMD_REG);
878#if USE_PIO
879 scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
880 NCR53c406a_pio_write(sg_virt(sg), sg->length);
881 }
882 REG0;
883#endif
884 }
885 break;
886
887 case 0x01:
888 if (int_reg & 0x10) {
889 rtrc(6);
890 current_SC->SCp.phase = data_in;
891 VDEB(printk("NCR53c406a: Data-In phase\n"));
892 outb(FLUSH_FIFO, CMD_REG);
893 LOAD_DMA_COUNT(scsi_bufflen(current_SC));
894#if USE_DMA
895 NCR53c406a_dma_read(scsi_sglist(current_SC),
896 scsdi_bufflen(current_SC));
897#endif
898 outb(TRANSFER_INFO | DMA_OP, CMD_REG);
899#if USE_PIO
900 scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
901 NCR53c406a_pio_read(sg_virt(sg), sg->length);
902 }
903 REG0;
904#endif
905 }
906 break;
907
908 case 0x02:
909 current_SC->SCp.phase = command_ph;
910 printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n");
911 break;
912
913 case 0x03:
914 rtrc(7);
915 current_SC->SCp.phase = status_ph;
916 VDEB(printk("NCR53c406a: Status phase\n"));
917 outb(FLUSH_FIFO, CMD_REG);
918 outb(INIT_CMD_COMPLETE, CMD_REG);
919 break;
920
921 case 0x04:
922 case 0x05:
923 printk("NCR53c406a: WARNING: Reserved phase!!!\n");
924 break;
925
926 case 0x06:
927 DEB(printk("NCR53c406a: Message-Out phase\n"));
928 current_SC->SCp.phase = message_out;
929 outb(SET_ATN, CMD_REG);
930 outb(MSG_ACCEPT, CMD_REG);
931 break;
932
933 case 0x07:
934 rtrc(4);
935 VDEB(printk("NCR53c406a: Message-In phase\n"));
936 current_SC->SCp.phase = message_in;
937
938 current_SC->SCp.Status = inb(SCSI_FIFO);
939 current_SC->SCp.Message = inb(SCSI_FIFO);
940
941 VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f));
942 DEB(printk("Status = %02x Message = %02x\n", current_SC->SCp.Status, current_SC->SCp.Message));
943
944 if (current_SC->SCp.Message == SAVE_POINTERS || current_SC->SCp.Message == DISCONNECT) {
945 outb(SET_ATN, CMD_REG);
946 DEB(printk("Discarding SAVE_POINTERS message\n"));
947 }
948 outb(MSG_ACCEPT, CMD_REG);
949 break;
950 }
951}
952
953#ifndef IRQ_LEV
954static int irq_probe(void)
955{
956 int irqs, irq;
957 unsigned long i;
958
959 inb(INT_REG);
960 irqs = probe_irq_on();
961
962
963 REG0;
964 outb(0xff, CMD_REG);
965
966
967 i = jiffies + WATCHDOG;
968 while (time_after(i, jiffies) && !(inb(STAT_REG) & 0x80))
969 barrier();
970 if (time_before_eq(i, jiffies)) {
971 probe_irq_off(irqs);
972 return -1;
973 }
974
975 irq = probe_irq_off(irqs);
976
977
978 outb(CHIP_RESET, CMD_REG);
979 outb(SCSI_NOP, CMD_REG);
980 chip_init();
981
982 return irq;
983}
984#endif
985
986static void chip_init(void)
987{
988 REG1;
989#if USE_DMA
990 outb(0x00, PIO_STATUS);
991#else
992 outb(0x01, PIO_STATUS);
993#endif
994 outb(0x00, PIO_FLAG);
995
996 outb(C4_IMG, CONFIG4);
997 outb(C3_IMG, CONFIG3);
998 outb(C2_IMG, CONFIG2);
999 outb(C1_IMG, CONFIG1);
1000
1001 outb(0x05, CLKCONV);
1002 outb(0x9C, SRTIMOUT);
1003 outb(0x05, SYNCPRD);
1004 outb(SYNC_MODE, SYNCOFF);
1005}
1006
1007static void __init calc_port_addr(void)
1008{
1009
1010 TC_LSB = (port_base + 0x00);
1011 TC_MSB = (port_base + 0x01);
1012 SCSI_FIFO = (port_base + 0x02);
1013 CMD_REG = (port_base + 0x03);
1014 STAT_REG = (port_base + 0x04);
1015 DEST_ID = (port_base + 0x04);
1016 INT_REG = (port_base + 0x05);
1017 SRTIMOUT = (port_base + 0x05);
1018 SEQ_REG = (port_base + 0x06);
1019 SYNCPRD = (port_base + 0x06);
1020 FIFO_FLAGS = (port_base + 0x07);
1021 SYNCOFF = (port_base + 0x07);
1022 CONFIG1 = (port_base + 0x08);
1023 CLKCONV = (port_base + 0x09);
1024
1025 CONFIG2 = (port_base + 0x0B);
1026 CONFIG3 = (port_base + 0x0C);
1027 CONFIG4 = (port_base + 0x0D);
1028 TC_HIGH = (port_base + 0x0E);
1029
1030
1031
1032
1033
1034
1035 PIO_FIFO = (port_base + 0x04);
1036
1037
1038
1039 PIO_STATUS = (port_base + 0x08);
1040
1041
1042 PIO_FLAG = (port_base + 0x0B);
1043 CONFIG5 = (port_base + 0x0D);
1044
1045
1046}
1047
1048MODULE_LICENSE("GPL");
1049
1050
1051
1052
1053
1054static struct scsi_host_template driver_template =
1055{
1056 .proc_name = "NCR53c406a" ,
1057 .name = "NCR53c406a" ,
1058 .detect = NCR53c406a_detect ,
1059 .release = NCR53c406a_release,
1060 .info = NCR53c406a_info ,
1061 .queuecommand = NCR53c406a_queue ,
1062 .eh_host_reset_handler = NCR53c406a_host_reset ,
1063 .bios_param = NCR53c406a_biosparm ,
1064 .can_queue = 1 ,
1065 .this_id = 7 ,
1066 .sg_tablesize = 32 ,
1067 .unchecked_isa_dma = 1 ,
1068 .use_clustering = ENABLE_CLUSTERING,
1069};
1070
1071#include "scsi_module.c"
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
