1/* 2 * TI clock drivers support 3 * 4 * Copyright (C) 2013 Texas Instruments, Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 11 * kind, whether express or implied; without even the implied warranty 12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 */ 15#ifndef __LINUX_CLK_TI_H__ 16#define __LINUX_CLK_TI_H__ 17 18#include <linux/clk-provider.h> 19#include <linux/clkdev.h> 20 21/** 22 * struct dpll_data - DPLL registers and integration data 23 * @mult_div1_reg: register containing the DPLL M and N bitfields 24 * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg 25 * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg 26 * @clk_bypass: struct clk pointer to the clock's bypass clock input 27 * @clk_ref: struct clk pointer to the clock's reference clock input 28 * @control_reg: register containing the DPLL mode bitfield 29 * @enable_mask: mask of the DPLL mode bitfield in @control_reg 30 * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() 31 * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() 32 * @last_rounded_m4xen: cache of the last M4X result of 33 * omap4_dpll_regm4xen_round_rate() 34 * @last_rounded_lpmode: cache of the last lpmode result of 35 * omap4_dpll_lpmode_recalc() 36 * @max_multiplier: maximum valid non-bypass multiplier value (actual) 37 * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() 38 * @min_divider: minimum valid non-bypass divider value (actual) 39 * @max_divider: maximum valid non-bypass divider value (actual) 40 * @modes: possible values of @enable_mask 41 * @autoidle_reg: register containing the DPLL autoidle mode bitfield 42 * @idlest_reg: register containing the DPLL idle status bitfield 43 * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg 44 * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg 45 * @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg 46 * @dcc_rate: rate atleast which DCC @dcc_mask must be set 47 * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg 48 * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg 49 * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg 50 * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg 51 * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs 52 * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs 53 * @flags: DPLL type/features (see below) 54 * 55 * Possible values for @flags: 56 * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) 57 * 58 * @freqsel_mask is only used on the OMAP34xx family and AM35xx. 59 * 60 * XXX Some DPLLs have multiple bypass inputs, so it's not technically 61 * correct to only have one @clk_bypass pointer. 62 * 63 * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, 64 * @last_rounded_n) should be separated from the runtime-fixed fields 65 * and placed into a different structure, so that the runtime-fixed data 66 * can be placed into read-only space. 67 */ 68struct dpll_data { 69 void __iomem *mult_div1_reg; 70 u32 mult_mask; 71 u32 div1_mask; 72 struct clk *clk_bypass; 73 struct clk *clk_ref; 74 void __iomem *control_reg; 75 u32 enable_mask; 76 unsigned long last_rounded_rate; 77 u16 last_rounded_m; 78 u8 last_rounded_m4xen; 79 u8 last_rounded_lpmode; 80 u16 max_multiplier; 81 u8 last_rounded_n; 82 u8 min_divider; 83 u16 max_divider; 84 u8 modes; 85 void __iomem *autoidle_reg; 86 void __iomem *idlest_reg; 87 u32 autoidle_mask; 88 u32 freqsel_mask; 89 u32 idlest_mask; 90 u32 dco_mask; 91 u32 sddiv_mask; 92 u32 dcc_mask; 93 unsigned long dcc_rate; 94 u32 lpmode_mask; 95 u32 m4xen_mask; 96 u8 auto_recal_bit; 97 u8 recal_en_bit; 98 u8 recal_st_bit; 99 u8 flags; 100}; 101 102struct clk_hw_omap; 103 104/** 105 * struct clk_hw_omap_ops - OMAP clk ops 106 * @find_idlest: find idlest register information for a clock 107 * @find_companion: find companion clock register information for a clock, 108 * basically converts CM_ICLKEN* <-> CM_FCLKEN* 109 * @allow_idle: enables autoidle hardware functionality for a clock 110 * @deny_idle: prevent autoidle hardware functionality for a clock 111 */ 112struct clk_hw_omap_ops { 113 void (*find_idlest)(struct clk_hw_omap *oclk, 114 void __iomem **idlest_reg, 115 u8 *idlest_bit, u8 *idlest_val); 116 void (*find_companion)(struct clk_hw_omap *oclk, 117 void __iomem **other_reg, 118 u8 *other_bit); 119 void (*allow_idle)(struct clk_hw_omap *oclk); 120 void (*deny_idle)(struct clk_hw_omap *oclk); 121}; 122 123/** 124 * struct clk_hw_omap - OMAP struct clk 125 * @node: list_head connecting this clock into the full clock list 126 * @enable_reg: register to write to enable the clock (see @enable_bit) 127 * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) 128 * @flags: see "struct clk.flags possibilities" above 129 * @clksel_reg: for clksel clks, register va containing src/divisor select 130 * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector 131 * @clksel: for clksel clks, pointer to struct clksel for this clock 132 * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock 133 * @clkdm_name: clockdomain name that this clock is contained in 134 * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime 135 * @ops: clock ops for this clock 136 */ 137struct clk_hw_omap { 138 struct clk_hw hw; 139 struct list_head node; 140 unsigned long fixed_rate; 141 u8 fixed_div; 142 void __iomem *enable_reg; 143 u8 enable_bit; 144 u8 flags; 145 void __iomem *clksel_reg; 146 u32 clksel_mask; 147 const struct clksel *clksel; 148 struct dpll_data *dpll_data; 149 const char *clkdm_name; 150 struct clockdomain *clkdm; 151 const struct clk_hw_omap_ops *ops; 152}; 153 154/* 155 * struct clk_hw_omap.flags possibilities 156 * 157 * XXX document the rest of the clock flags here 158 * 159 * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed 160 * with 32bit ops, by default OMAP1 uses 16bit ops. 161 * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support. 162 * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent 163 * clock is put to no-idle mode. 164 * ENABLE_ON_INIT: Clock is enabled on init. 165 * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0' 166 * disable. This inverts the behavior making '0' enable and '1' disable. 167 * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL 168 * bits share the same register. This flag allows the 169 * omap4_dpllmx*() code to determine which GATE_CTRL bit field 170 * should be used. This is a temporary solution - a better approach 171 * would be to associate clock type-specific data with the clock, 172 * similar to the struct dpll_data approach. 173 * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers. 174 */ 175#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ 176#define CLOCK_IDLE_CONTROL (1 << 1) 177#define CLOCK_NO_IDLE_PARENT (1 << 2) 178#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ 179#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ 180#define CLOCK_CLKOUTX2 (1 << 5) 181#define MEMMAP_ADDRESSING (1 << 6) 182 183/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ 184#define DPLL_LOW_POWER_STOP 0x1 185#define DPLL_LOW_POWER_BYPASS 0x5 186#define DPLL_LOCKED 0x7 187 188/* DPLL Type and DCO Selection Flags */ 189#define DPLL_J_TYPE 0x1 190 191/* Static memmap indices */ 192enum { 193 TI_CLKM_CM = 0, 194 TI_CLKM_CM2, 195 TI_CLKM_PRM, 196 TI_CLKM_SCRM, 197 TI_CLKM_CTRL, 198 CLK_MAX_MEMMAPS 199}; 200 201/** 202 * struct clk_omap_reg - OMAP register declaration 203 * @offset: offset from the master IP module base address 204 * @index: index of the master IP module 205 */ 206struct clk_omap_reg { 207 u16 offset; 208 u16 index; 209}; 210 211/** 212 * struct ti_clk_ll_ops - low-level ops for clocks 213 * @clk_readl: pointer to register read function 214 * @clk_writel: pointer to register write function 215 * @clkdm_clk_enable: pointer to clockdomain enable function 216 * @clkdm_clk_disable: pointer to clockdomain disable function 217 * @cm_wait_module_ready: pointer to CM module wait ready function 218 * @cm_split_idlest_reg: pointer to CM module function to split idlest reg 219 * 220 * Low-level ops are generally used by the basic clock types (clk-gate, 221 * clk-mux, clk-divider etc.) to provide support for various low-level 222 * hadrware interfaces (direct MMIO, regmap etc.), and is initialized 223 * by board code. Low-level ops also contain some other platform specific 224 * operations not provided directly by clock drivers. 225 */ 226struct ti_clk_ll_ops { 227 u32 (*clk_readl)(void __iomem *reg); 228 void (*clk_writel)(u32 val, void __iomem *reg); 229 int (*clkdm_clk_enable)(struct clockdomain *clkdm, struct clk *clk); 230 int (*clkdm_clk_disable)(struct clockdomain *clkdm, 231 struct clk *clk); 232 int (*cm_wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg, 233 u8 idlest_shift); 234 int (*cm_split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst, 235 u8 *idlest_reg_id); 236}; 237 238#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) 239 240void omap2_init_clk_clkdm(struct clk_hw *clk); 241int omap2_clk_disable_autoidle_all(void); 242int omap2_clk_enable_autoidle_all(void); 243int omap2_clk_allow_idle(struct clk *clk); 244int omap2_clk_deny_idle(struct clk *clk); 245unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, 246 unsigned long parent_rate); 247int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, 248 unsigned long parent_rate); 249void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); 250void omap2xxx_clkt_vps_init(void); 251unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk); 252 253void ti_dt_clk_init_retry_clks(void); 254void ti_dt_clockdomains_setup(void); 255int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops); 256 257struct regmap; 258 259int omap2_clk_provider_init(struct device_node *parent, int index, 260 struct regmap *syscon, void __iomem *mem); 261void omap2_clk_legacy_provider_init(int index, void __iomem *mem); 262 263int omap3430_dt_clk_init(void); 264int omap3630_dt_clk_init(void); 265int am35xx_dt_clk_init(void); 266int dm814x_dt_clk_init(void); 267int dm816x_dt_clk_init(void); 268int omap4xxx_dt_clk_init(void); 269int omap5xxx_dt_clk_init(void); 270int dra7xx_dt_clk_init(void); 271int am33xx_dt_clk_init(void); 272int am43xx_dt_clk_init(void); 273int omap2420_dt_clk_init(void); 274int omap2430_dt_clk_init(void); 275 276struct ti_clk_features { 277 u32 flags; 278 long fint_min; 279 long fint_max; 280 long fint_band1_max; 281 long fint_band2_min; 282 u8 dpll_bypass_vals; 283 u8 cm_idlest_val; 284}; 285 286#define TI_CLK_DPLL_HAS_FREQSEL BIT(0) 287#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1) 288#define TI_CLK_DISABLE_CLKDM_CONTROL BIT(2) 289 290void ti_clk_setup_features(struct ti_clk_features *features); 291const struct ti_clk_features *ti_clk_get_features(void); 292 293extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; 294 295#ifdef CONFIG_ATAGS 296int omap3430_clk_legacy_init(void); 297int omap3430es1_clk_legacy_init(void); 298int omap36xx_clk_legacy_init(void); 299int am35xx_clk_legacy_init(void); 300#else 301static inline int omap3430_clk_legacy_init(void) { return -ENXIO; } 302static inline int omap3430es1_clk_legacy_init(void) { return -ENXIO; } 303static inline int omap36xx_clk_legacy_init(void) { return -ENXIO; } 304static inline int am35xx_clk_legacy_init(void) { return -ENXIO; } 305#endif 306 307 308#endif 309