/*
 *
 *  Generic Bluetooth USB driver
 *
 *  Copyright (C) 2005-2008  Marcel Holtmann <marcel@holtmann.org>
 *
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#include <linux/module.h>
#include <linux/usb.h>
#include <linux/firmware.h>
#include <asm/unaligned.h>

#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>

#include "btintel.h"
#include "btbcm.h"
#include "btrtl.h"

#define VERSION "0.8"

static bool disable_scofix;
static bool force_scofix;

static bool reset = true;

static struct usb_driver btusb_driver;

#define BTUSB_IGNORE            0x01
#define BTUSB_DIGIANSWER        0x02
#define BTUSB_CSR               0x04
#define BTUSB_SNIFFER           0x08
#define BTUSB_BCM92035          0x10
#define BTUSB_BROKEN_ISOC       0x20
#define BTUSB_WRONG_SCO_MTU     0x40
#define BTUSB_ATH3012           0x80
#define BTUSB_INTEL             0x100
#define BTUSB_INTEL_BOOT        0x200
#define BTUSB_BCM_PATCHRAM      0x400
#define BTUSB_MARVELL           0x800
#define BTUSB_SWAVE             0x1000
#define BTUSB_INTEL_NEW         0x2000
#define BTUSB_AMP               0x4000
#define BTUSB_QCA_ROME          0x8000
#define BTUSB_BCM_APPLE         0x10000
#define BTUSB_REALTEK           0x20000
#define BTUSB_BCM2045           0x40000
#define BTUSB_IFNUM_2           0x80000

static const struct usb_device_id btusb_table[] = {
        /* Generic Bluetooth USB device */
        { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },

        /* Generic Bluetooth AMP device */
        { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },

        /* Generic Bluetooth USB interface */
        { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },

        /* Apple-specific (Broadcom) devices */
        { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
          .driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 },

        /* MediaTek MT76x0E */
        { USB_DEVICE(0x0e8d, 0x763f) },

        /* Broadcom SoftSailing reporting vendor specific */
        { USB_DEVICE(0x0a5c, 0x21e1) },

        /* Apple MacBookPro 7,1 */
        { USB_DEVICE(0x05ac, 0x8213) },

        /* Apple iMac11,1 */
        { USB_DEVICE(0x05ac, 0x8215) },

        /* Apple MacBookPro6,2 */
        { USB_DEVICE(0x05ac, 0x8218) },

        /* Apple MacBookAir3,1, MacBookAir3,2 */
        { USB_DEVICE(0x05ac, 0x821b) },

        /* Apple MacBookAir4,1 */
        { USB_DEVICE(0x05ac, 0x821f) },

        /* Apple MacBookPro8,2 */
        { USB_DEVICE(0x05ac, 0x821a) },

        /* Apple MacMini5,1 */
        { USB_DEVICE(0x05ac, 0x8281) },

        /* AVM BlueFRITZ! USB v2.0 */
        { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },

        /* Bluetooth Ultraport Module from IBM */
        { USB_DEVICE(0x04bf, 0x030a) },

        /* ALPS Modules with non-standard id */
        { USB_DEVICE(0x044e, 0x3001) },
        { USB_DEVICE(0x044e, 0x3002) },

        /* Ericsson with non-standard id */
        { USB_DEVICE(0x0bdb, 0x1002) },

        /* Canyon CN-BTU1 with HID interfaces */
        { USB_DEVICE(0x0c10, 0x0000) },

        /* Broadcom BCM20702A0 */
        { USB_DEVICE(0x413c, 0x8197) },

        /* Broadcom BCM20702B0 (Dynex/Insignia) */
        { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },

        /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
        { USB_DEVICE(0x105b, 0xe065), .driver_info = BTUSB_BCM_PATCHRAM },

        /* Foxconn - Hon Hai */
        { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
          .driver_info = BTUSB_BCM_PATCHRAM },

        /* Lite-On Technology - Broadcom based */
        { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
          .driver_info = BTUSB_BCM_PATCHRAM },

        /* Broadcom devices with vendor specific id */
        { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
          .driver_info = BTUSB_BCM_PATCHRAM },

        /* ASUSTek Computer - Broadcom based */
        { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
          .driver_info = BTUSB_BCM_PATCHRAM },

        /* Belkin F8065bf - Broadcom based */
        { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
          .driver_info = BTUSB_BCM_PATCHRAM },

        /* IMC Networks - Broadcom based */
        { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
          .driver_info = BTUSB_BCM_PATCHRAM },

        /* Toshiba Corp - Broadcom based */
        { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
          .driver_info = BTUSB_BCM_PATCHRAM },

        /* Intel Bluetooth USB Bootloader (RAM module) */
        { USB_DEVICE(0x8087, 0x0a5a),
          .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },

        { }     /* Terminating entry */
};

MODULE_DEVICE_TABLE(usb, btusb_table);

static const struct usb_device_id blacklist_table[] = {
        /* CSR BlueCore devices */
        { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },

        /* Broadcom BCM2033 without firmware */
        { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },

        /* Broadcom BCM2045 devices */
        { USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 },

        /* Atheros 3011 with sflash firmware */
        { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
        { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
        { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
        { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
        { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
        { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
        { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },

        /* Atheros AR9285 Malbec with sflash firmware */
        { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },

        /* Atheros 3012 with sflash firmware */
        { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },

        /* Atheros AR5BBU12 with sflash firmware */
        { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },

        /* Atheros AR5BBU12 with sflash firmware */
        { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },

        /* QCA ROME chipset */
        { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
        { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
        { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },

        /* Broadcom BCM2035 */
        { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
        { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
        { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },

        /* Broadcom BCM2045 */
        { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
        { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },

        /* IBM/Lenovo ThinkPad with Broadcom chip */
        { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
        { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },

        /* HP laptop with Broadcom chip */
        { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },

        /* Dell laptop with Broadcom chip */
        { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },

        /* Dell Wireless 370 and 410 devices */
        { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
        { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },

        /* Belkin F8T012 and F8T013 devices */
        { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
        { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },

        /* Asus WL-BTD202 device */
        { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },

        /* Kensington Bluetooth USB adapter */
        { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },

        /* RTX Telecom based adapters with buggy SCO support */
        { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
        { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },

        /* CONWISE Technology based adapters with buggy SCO support */
        { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },

        /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
        { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },

        /* Digianswer devices */
        { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
        { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },

        /* CSR BlueCore Bluetooth Sniffer */
        { USB_DEVICE(0x0a12, 0x0002),
          .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },

        /* Frontline ComProbe Bluetooth Sniffer */
        { USB_DEVICE(0x16d3, 0x0002),
          .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },

        /* Marvell Bluetooth devices */
        { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
        { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },

        /* Intel Bluetooth devices */
        { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
        { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
        { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
        { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },

        /* Other Intel Bluetooth devices */
        { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
          .driver_info = BTUSB_IGNORE },

        /* Realtek Bluetooth devices */
        { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
          .driver_info = BTUSB_REALTEK },

        /* Additional Realtek 8723AE Bluetooth devices */
        { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
        { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },

        /* Additional Realtek 8723BE Bluetooth devices */
        { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
        { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
        { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
        { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
        { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },

        /* Additional Realtek 8821AE Bluetooth devices */
        { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
        { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
        { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
        { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
        { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },

        /* Silicon Wave based devices */
        { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },

        { }     /* Terminating entry */
};

#define BTUSB_MAX_ISOC_FRAMES   10

#define BTUSB_INTR_RUNNING      0
#define BTUSB_BULK_RUNNING      1
#define BTUSB_ISOC_RUNNING      2
#define BTUSB_SUSPENDING        3
#define BTUSB_DID_ISO_RESUME    4
#define BTUSB_BOOTLOADER        5
#define BTUSB_DOWNLOADING       6
#define BTUSB_FIRMWARE_LOADED   7
#define BTUSB_FIRMWARE_FAILED   8
#define BTUSB_BOOTING           9
#define BTUSB_RESET_RESUME      10
#define BTUSB_DIAG_RUNNING      11

struct btusb_data {
        struct hci_dev       *hdev;
        struct usb_device    *udev;
        struct usb_interface *intf;
        struct usb_interface *isoc;
        struct usb_interface *diag;

        unsigned long flags;

        struct work_struct work;
        struct work_struct waker;

        struct usb_anchor deferred;
        struct usb_anchor tx_anchor;
        int tx_in_flight;
        spinlock_t txlock;

        struct usb_anchor intr_anchor;
        struct usb_anchor bulk_anchor;
        struct usb_anchor isoc_anchor;
        struct usb_anchor diag_anchor;
        spinlock_t rxlock;

        struct sk_buff *evt_skb;
        struct sk_buff *acl_skb;
        struct sk_buff *sco_skb;

        struct usb_endpoint_descriptor *intr_ep;
        struct usb_endpoint_descriptor *bulk_tx_ep;
        struct usb_endpoint_descriptor *bulk_rx_ep;
        struct usb_endpoint_descriptor *isoc_tx_ep;
        struct usb_endpoint_descriptor *isoc_rx_ep;
        struct usb_endpoint_descriptor *diag_tx_ep;
        struct usb_endpoint_descriptor *diag_rx_ep;

        __u8 cmdreq_type;
        __u8 cmdreq;

        unsigned int sco_num;
        int isoc_altsetting;
        int suspend_count;

        int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
        int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);

        int (*setup_on_usb)(struct hci_dev *hdev);
};

static inline void btusb_free_frags(struct btusb_data *data)
{
        unsigned long flags;

        spin_lock_irqsave(&data->rxlock, flags);

        kfree_skb(data->evt_skb);
        data->evt_skb = NULL;

        kfree_skb(data->acl_skb);
        data->acl_skb = NULL;

        kfree_skb(data->sco_skb);
        data->sco_skb = NULL;

        spin_unlock_irqrestore(&data->rxlock, flags);
}

static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
{
        struct sk_buff *skb;
        int err = 0;

        spin_lock(&data->rxlock);
        skb = data->evt_skb;

        while (count) {
                int len;

                if (!skb) {
                        skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
                        if (!skb) {
                                err = -ENOMEM;
                                break;
                        }

                        hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
                        hci_skb_expect(skb) = HCI_EVENT_HDR_SIZE;
                }

                len = min_t(uint, hci_skb_expect(skb), count);
                memcpy(skb_put(skb, len), buffer, len);

                count -= len;
                buffer += len;
                hci_skb_expect(skb) -= len;

                if (skb->len == HCI_EVENT_HDR_SIZE) {
                        /* Complete event header */
                        hci_skb_expect(skb) = hci_event_hdr(skb)->plen;

                        if (skb_tailroom(skb) < hci_skb_expect(skb)) {
                                kfree_skb(skb);
                                skb = NULL;

                                err = -EILSEQ;
                                break;
                        }
                }

                if (!hci_skb_expect(skb)) {
                        /* Complete frame */
                        data->recv_event(data->hdev, skb);
                        skb = NULL;
                }
        }

        data->evt_skb = skb;
        spin_unlock(&data->rxlock);

        return err;
}

static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
{
        struct sk_buff *skb;
        int err = 0;

        spin_lock(&data->rxlock);
        skb = data->acl_skb;

        while (count) {
                int len;

                if (!skb) {
                        skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
                        if (!skb) {
                                err = -ENOMEM;
                                break;
                        }

                        hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT;
                        hci_skb_expect(skb) = HCI_ACL_HDR_SIZE;
                }

                len = min_t(uint, hci_skb_expect(skb), count);
                memcpy(skb_put(skb, len), buffer, len);

                count -= len;
                buffer += len;
                hci_skb_expect(skb) -= len;

                if (skb->len == HCI_ACL_HDR_SIZE) {
                        __le16 dlen = hci_acl_hdr(skb)->dlen;

                        /* Complete ACL header */
                        hci_skb_expect(skb) = __le16_to_cpu(dlen);

                        if (skb_tailroom(skb) < hci_skb_expect(skb)) {
                                kfree_skb(skb);
                                skb = NULL;

                                err = -EILSEQ;
                                break;
                        }
                }

                if (!hci_skb_expect(skb)) {
                        /* Complete frame */
                        hci_recv_frame(data->hdev, skb);
                        skb = NULL;
                }
        }

        data->acl_skb = skb;
        spin_unlock(&data->rxlock);

        return err;
}

static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
{
        struct sk_buff *skb;
        int err = 0;

        spin_lock(&data->rxlock);
        skb = data->sco_skb;

        while (count) {
                int len;

                if (!skb) {
                        skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
                        if (!skb) {
                                err = -ENOMEM;
                                break;
                        }

                        hci_skb_pkt_type(skb) = HCI_SCODATA_PKT;
                        hci_skb_expect(skb) = HCI_SCO_HDR_SIZE;
                }

                len = min_t(uint, hci_skb_expect(skb), count);
                memcpy(skb_put(skb, len), buffer, len);

                count -= len;
                buffer += len;
                hci_skb_expect(skb) -= len;

                if (skb->len == HCI_SCO_HDR_SIZE) {
                        /* Complete SCO header */
                        hci_skb_expect(skb) = hci_sco_hdr(skb)->dlen;

                        if (skb_tailroom(skb) < hci_skb_expect(skb)) {
                                kfree_skb(skb);
                                skb = NULL;

                                err = -EILSEQ;
                                break;
                        }
                }

                if (!hci_skb_expect(skb)) {
                        /* Complete frame */
                        hci_recv_frame(data->hdev, skb);
                        skb = NULL;
                }
        }

        data->sco_skb = skb;
        spin_unlock(&data->rxlock);

        return err;
}

static void btusb_intr_complete(struct urb *urb)
{
        struct hci_dev *hdev = urb->context;
        struct btusb_data *data = hci_get_drvdata(hdev);
        int err;

        BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
               urb->actual_length);

        if (!test_bit(HCI_RUNNING, &hdev->flags))
                return;

        if (urb->status == 0) {
                hdev->stat.byte_rx += urb->actual_length;

                if (btusb_recv_intr(data, urb->transfer_buffer,
                                    urb->actual_length) < 0) {
                        BT_ERR("%s corrupted event packet", hdev->name);
                        hdev->stat.err_rx++;
                }
        } else if (urb->status == -ENOENT) {
                /* Avoid suspend failed when usb_kill_urb */
                return;
        }

        if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
                return;

        usb_mark_last_busy(data->udev);
        usb_anchor_urb(urb, &data->intr_anchor);

        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err < 0) {
                /* -EPERM: urb is being killed;
                 * -ENODEV: device got disconnected */
                if (err != -EPERM && err != -ENODEV)
                        BT_ERR("%s urb %p failed to resubmit (%d)",
                               hdev->name, urb, -err);
                usb_unanchor_urb(urb);
        }
}

static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct urb *urb;
        unsigned char *buf;
        unsigned int pipe;
        int err, size;

        BT_DBG("%s", hdev->name);

        if (!data->intr_ep)
                return -ENODEV;

        urb = usb_alloc_urb(0, mem_flags);
        if (!urb)
                return -ENOMEM;

        size = le16_to_cpu(data->intr_ep->wMaxPacketSize);

        buf = kmalloc(size, mem_flags);
        if (!buf) {
                usb_free_urb(urb);
                return -ENOMEM;
        }

        pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);

        usb_fill_int_urb(urb, data->udev, pipe, buf, size,
                         btusb_intr_complete, hdev, data->intr_ep->bInterval);

        urb->transfer_flags |= URB_FREE_BUFFER;

        usb_anchor_urb(urb, &data->intr_anchor);

        err = usb_submit_urb(urb, mem_flags);
        if (err < 0) {
                if (err != -EPERM && err != -ENODEV)
                        BT_ERR("%s urb %p submission failed (%d)",
                               hdev->name, urb, -err);
                usb_unanchor_urb(urb);
        }

        usb_free_urb(urb);

        return err;
}

static void btusb_bulk_complete(struct urb *urb)
{
        struct hci_dev *hdev = urb->context;
        struct btusb_data *data = hci_get_drvdata(hdev);
        int err;

        BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
               urb->actual_length);

        if (!test_bit(HCI_RUNNING, &hdev->flags))
                return;

        if (urb->status == 0) {
                hdev->stat.byte_rx += urb->actual_length;

                if (data->recv_bulk(data, urb->transfer_buffer,
                                    urb->actual_length) < 0) {
                        BT_ERR("%s corrupted ACL packet", hdev->name);
                        hdev->stat.err_rx++;
                }
        } else if (urb->status == -ENOENT) {
                /* Avoid suspend failed when usb_kill_urb */
                return;
        }

        if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
                return;

        usb_anchor_urb(urb, &data->bulk_anchor);
        usb_mark_last_busy(data->udev);

        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err < 0) {
                /* -EPERM: urb is being killed;
                 * -ENODEV: device got disconnected */
                if (err != -EPERM && err != -ENODEV)
                        BT_ERR("%s urb %p failed to resubmit (%d)",
                               hdev->name, urb, -err);
                usb_unanchor_urb(urb);
        }
}

static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct urb *urb;
        unsigned char *buf;
        unsigned int pipe;
        int err, size = HCI_MAX_FRAME_SIZE;

        BT_DBG("%s", hdev->name);

        if (!data->bulk_rx_ep)
                return -ENODEV;

        urb = usb_alloc_urb(0, mem_flags);
        if (!urb)
                return -ENOMEM;

        buf = kmalloc(size, mem_flags);
        if (!buf) {
                usb_free_urb(urb);
                return -ENOMEM;
        }

        pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);

        usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
                          btusb_bulk_complete, hdev);

        urb->transfer_flags |= URB_FREE_BUFFER;

        usb_mark_last_busy(data->udev);
        usb_anchor_urb(urb, &data->bulk_anchor);

        err = usb_submit_urb(urb, mem_flags);
        if (err < 0) {
                if (err != -EPERM && err != -ENODEV)
                        BT_ERR("%s urb %p submission failed (%d)",
                               hdev->name, urb, -err);
                usb_unanchor_urb(urb);
        }

        usb_free_urb(urb);

        return err;
}

static void btusb_isoc_complete(struct urb *urb)
{
        struct hci_dev *hdev = urb->context;
        struct btusb_data *data = hci_get_drvdata(hdev);
        int i, err;

        BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
               urb->actual_length);

        if (!test_bit(HCI_RUNNING, &hdev->flags))
                return;

        if (urb->status == 0) {
                for (i = 0; i < urb->number_of_packets; i++) {
                        unsigned int offset = urb->iso_frame_desc[i].offset;
                        unsigned int length = urb->iso_frame_desc[i].actual_length;

                        if (urb->iso_frame_desc[i].status)
                                continue;

                        hdev->stat.byte_rx += length;

                        if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
                                            length) < 0) {
                                BT_ERR("%s corrupted SCO packet", hdev->name);
                                hdev->stat.err_rx++;
                        }
                }
        } else if (urb->status == -ENOENT) {
                /* Avoid suspend failed when usb_kill_urb */
                return;
        }

        if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
                return;

        usb_anchor_urb(urb, &data->isoc_anchor);

        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err < 0) {
                /* -EPERM: urb is being killed;
                 * -ENODEV: device got disconnected */
                if (err != -EPERM && err != -ENODEV)
                        BT_ERR("%s urb %p failed to resubmit (%d)",
                               hdev->name, urb, -err);
                usb_unanchor_urb(urb);
        }
}

static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
{
        int i, offset = 0;

        BT_DBG("len %d mtu %d", len, mtu);

        for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
                                        i++, offset += mtu, len -= mtu) {
                urb->iso_frame_desc[i].offset = offset;
                urb->iso_frame_desc[i].length = mtu;
        }

        if (len && i < BTUSB_MAX_ISOC_FRAMES) {
                urb->iso_frame_desc[i].offset = offset;
                urb->iso_frame_desc[i].length = len;
                i++;
        }

        urb->number_of_packets = i;
}

static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct urb *urb;
        unsigned char *buf;
        unsigned int pipe;
        int err, size;

        BT_DBG("%s", hdev->name);

        if (!data->isoc_rx_ep)
                return -ENODEV;

        urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
        if (!urb)
                return -ENOMEM;

        size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
                                                BTUSB_MAX_ISOC_FRAMES;

        buf = kmalloc(size, mem_flags);
        if (!buf) {
                usb_free_urb(urb);
                return -ENOMEM;
        }

        pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);

        usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
                         hdev, data->isoc_rx_ep->bInterval);

        urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;

        __fill_isoc_descriptor(urb, size,
                               le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));

        usb_anchor_urb(urb, &data->isoc_anchor);

        err = usb_submit_urb(urb, mem_flags);
        if (err < 0) {
                if (err != -EPERM && err != -ENODEV)
                        BT_ERR("%s urb %p submission failed (%d)",
                               hdev->name, urb, -err);
                usb_unanchor_urb(urb);
        }

        usb_free_urb(urb);

        return err;
}

static void btusb_diag_complete(struct urb *urb)
{
        struct hci_dev *hdev = urb->context;
        struct btusb_data *data = hci_get_drvdata(hdev);
        int err;

        BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
               urb->actual_length);

        if (urb->status == 0) {
                struct sk_buff *skb;

                skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC);
                if (skb) {
                        memcpy(skb_put(skb, urb->actual_length),
                               urb->transfer_buffer, urb->actual_length);
                        hci_recv_diag(hdev, skb);
                }
        } else if (urb->status == -ENOENT) {
                /* Avoid suspend failed when usb_kill_urb */
                return;
        }

        if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags))
                return;

        usb_anchor_urb(urb, &data->diag_anchor);
        usb_mark_last_busy(data->udev);

        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err < 0) {
                /* -EPERM: urb is being killed;
                 * -ENODEV: device got disconnected */
                if (err != -EPERM && err != -ENODEV)
                        BT_ERR("%s urb %p failed to resubmit (%d)",
                               hdev->name, urb, -err);
                usb_unanchor_urb(urb);
        }
}

static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct urb *urb;
        unsigned char *buf;
        unsigned int pipe;
        int err, size = HCI_MAX_FRAME_SIZE;

        BT_DBG("%s", hdev->name);

        if (!data->diag_rx_ep)
                return -ENODEV;

        urb = usb_alloc_urb(0, mem_flags);
        if (!urb)
                return -ENOMEM;

        buf = kmalloc(size, mem_flags);
        if (!buf) {
                usb_free_urb(urb);
                return -ENOMEM;
        }

        pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress);

        usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
                          btusb_diag_complete, hdev);

        urb->transfer_flags |= URB_FREE_BUFFER;

        usb_mark_last_busy(data->udev);
        usb_anchor_urb(urb, &data->diag_anchor);

        err = usb_submit_urb(urb, mem_flags);
        if (err < 0) {
                if (err != -EPERM && err != -ENODEV)
                        BT_ERR("%s urb %p submission failed (%d)",
                               hdev->name, urb, -err);
                usb_unanchor_urb(urb);
        }

        usb_free_urb(urb);

        return err;
}

static void btusb_tx_complete(struct urb *urb)
{
        struct sk_buff *skb = urb->context;
        struct hci_dev *hdev = (struct hci_dev *)skb->dev;
        struct btusb_data *data = hci_get_drvdata(hdev);

        BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
               urb->actual_length);

        if (!test_bit(HCI_RUNNING, &hdev->flags))
                goto done;

        if (!urb->status)
                hdev->stat.byte_tx += urb->transfer_buffer_length;
        else
                hdev->stat.err_tx++;

done:
        spin_lock(&data->txlock);
        data->tx_in_flight--;
        spin_unlock(&data->txlock);

        kfree(urb->setup_packet);

        kfree_skb(skb);
}

static void btusb_isoc_tx_complete(struct urb *urb)
{
        struct sk_buff *skb = urb->context;
        struct hci_dev *hdev = (struct hci_dev *)skb->dev;

        BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
               urb->actual_length);

        if (!test_bit(HCI_RUNNING, &hdev->flags))
                goto done;

        if (!urb->status)
                hdev->stat.byte_tx += urb->transfer_buffer_length;
        else
                hdev->stat.err_tx++;

done:
        kfree(urb->setup_packet);

        kfree_skb(skb);
}

static int btusb_open(struct hci_dev *hdev)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        int err;

        BT_DBG("%s", hdev->name);

        /* Patching USB firmware files prior to starting any URBs of HCI path
         * It is more safe to use USB bulk channel for downloading USB patch
         */
        if (data->setup_on_usb) {
                err = data->setup_on_usb(hdev);
                if (err < 0)
                        return err;
        }

        err = usb_autopm_get_interface(data->intf);
        if (err < 0)
                return err;

        data->intf->needs_remote_wakeup = 1;

        if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
                goto done;

        err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
        if (err < 0)
                goto failed;

        err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
        if (err < 0) {
                usb_kill_anchored_urbs(&data->intr_anchor);
                goto failed;
        }

        set_bit(BTUSB_BULK_RUNNING, &data->flags);
        btusb_submit_bulk_urb(hdev, GFP_KERNEL);

        if (data->diag) {
                if (!btusb_submit_diag_urb(hdev, GFP_KERNEL))
                        set_bit(BTUSB_DIAG_RUNNING, &data->flags);
        }

done:
        usb_autopm_put_interface(data->intf);
        return 0;

failed:
        clear_bit(BTUSB_INTR_RUNNING, &data->flags);
        usb_autopm_put_interface(data->intf);
        return err;
}

static void btusb_stop_traffic(struct btusb_data *data)
{
        usb_kill_anchored_urbs(&data->intr_anchor);
        usb_kill_anchored_urbs(&data->bulk_anchor);
        usb_kill_anchored_urbs(&data->isoc_anchor);
        usb_kill_anchored_urbs(&data->diag_anchor);
}

static int btusb_close(struct hci_dev *hdev)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        int err;

        BT_DBG("%s", hdev->name);

        cancel_work_sync(&data->work);
        cancel_work_sync(&data->waker);

        clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
        clear_bit(BTUSB_BULK_RUNNING, &data->flags);
        clear_bit(BTUSB_INTR_RUNNING, &data->flags);
        clear_bit(BTUSB_DIAG_RUNNING, &data->flags);

        btusb_stop_traffic(data);
        btusb_free_frags(data);

        err = usb_autopm_get_interface(data->intf);
        if (err < 0)
                goto failed;

        data->intf->needs_remote_wakeup = 0;
        usb_autopm_put_interface(data->intf);

failed:
        usb_scuttle_anchored_urbs(&data->deferred);
        return 0;
}

static int btusb_flush(struct hci_dev *hdev)
{
        struct btusb_data *data = hci_get_drvdata(hdev);

        BT_DBG("%s", hdev->name);

        usb_kill_anchored_urbs(&data->tx_anchor);
        btusb_free_frags(data);

        return 0;
}

static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct usb_ctrlrequest *dr;
        struct urb *urb;
        unsigned int pipe;

        urb = usb_alloc_urb(0, GFP_KERNEL);
        if (!urb)
                return ERR_PTR(-ENOMEM);

        dr = kmalloc(sizeof(*dr), GFP_KERNEL);
        if (!dr) {
                usb_free_urb(urb);
                return ERR_PTR(-ENOMEM);
        }

        dr->bRequestType = data->cmdreq_type;
        dr->bRequest     = data->cmdreq;
        dr->wIndex       = 0;
        dr->wValue       = 0;
        dr->wLength      = __cpu_to_le16(skb->len);

        pipe = usb_sndctrlpipe(data->udev, 0x00);

        usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
                             skb->data, skb->len, btusb_tx_complete, skb);

        skb->dev = (void *)hdev;

        return urb;
}

static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct urb *urb;
        unsigned int pipe;

        if (!data->bulk_tx_ep)
                return ERR_PTR(-ENODEV);

        urb = usb_alloc_urb(0, GFP_KERNEL);
        if (!urb)
                return ERR_PTR(-ENOMEM);

        pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);

        usb_fill_bulk_urb(urb, data->udev, pipe,
                          skb->data, skb->len, btusb_tx_complete, skb);

        skb->dev = (void *)hdev;

        return urb;
}

static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct urb *urb;
        unsigned int pipe;

        if (!data->isoc_tx_ep)
                return ERR_PTR(-ENODEV);

        urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
        if (!urb)
                return ERR_PTR(-ENOMEM);

        pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);

        usb_fill_int_urb(urb, data->udev, pipe,
                         skb->data, skb->len, btusb_isoc_tx_complete,
                         skb, data->isoc_tx_ep->bInterval);

        urb->transfer_flags  = URB_ISO_ASAP;

        __fill_isoc_descriptor(urb, skb->len,
                               le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));

        skb->dev = (void *)hdev;

        return urb;
}

static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        int err;

        usb_anchor_urb(urb, &data->tx_anchor);

        err = usb_submit_urb(urb, GFP_KERNEL);
        if (err < 0) {
                if (err != -EPERM && err != -ENODEV)
                        BT_ERR("%s urb %p submission failed (%d)",
                               hdev->name, urb, -err);
                kfree(urb->setup_packet);
                usb_unanchor_urb(urb);
        } else {
                usb_mark_last_busy(data->udev);
        }

        usb_free_urb(urb);
        return err;
}

static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        unsigned long flags;
        bool suspending;

        spin_lock_irqsave(&data->txlock, flags);
        suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
        if (!suspending)
                data->tx_in_flight++;
        spin_unlock_irqrestore(&data->txlock, flags);

        if (!suspending)
                return submit_tx_urb(hdev, urb);

        usb_anchor_urb(urb, &data->deferred);
        schedule_work(&data->waker);

        usb_free_urb(urb);
        return 0;
}

static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
        struct urb *urb;

        BT_DBG("%s", hdev->name);

        switch (hci_skb_pkt_type(skb)) {
        case HCI_COMMAND_PKT:
                urb = alloc_ctrl_urb(hdev, skb);
                if (IS_ERR(urb))
                        return PTR_ERR(urb);

                hdev->stat.cmd_tx++;
                return submit_or_queue_tx_urb(hdev, urb);

        case HCI_ACLDATA_PKT:
                urb = alloc_bulk_urb(hdev, skb);
                if (IS_ERR(urb))
                        return PTR_ERR(urb);

                hdev->stat.acl_tx++;
                return submit_or_queue_tx_urb(hdev, urb);

        case HCI_SCODATA_PKT:
                if (hci_conn_num(hdev, SCO_LINK) < 1)
                        return -ENODEV;

                urb = alloc_isoc_urb(hdev, skb);
                if (IS_ERR(urb))
                        return PTR_ERR(urb);

                hdev->stat.sco_tx++;
                return submit_tx_urb(hdev, urb);
        }

        return -EILSEQ;
}

static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
{
        struct btusb_data *data = hci_get_drvdata(hdev);

        BT_DBG("%s evt %d", hdev->name, evt);

        if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
                data->sco_num = hci_conn_num(hdev, SCO_LINK);
                schedule_work(&data->work);
        }
}

static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct usb_interface *intf = data->isoc;
        struct usb_endpoint_descriptor *ep_desc;
        int i, err;

        if (!data->isoc)
                return -ENODEV;

        err = usb_set_interface(data->udev, 1, altsetting);
        if (err < 0) {
                BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
                return err;
        }

        data->isoc_altsetting = altsetting;

        data->isoc_tx_ep = NULL;
        data->isoc_rx_ep = NULL;

        for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
                ep_desc = &intf->cur_altsetting->endpoint[i].desc;

                if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
                        data->isoc_tx_ep = ep_desc;
                        continue;
                }

                if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
                        data->isoc_rx_ep = ep_desc;
                        continue;
                }
        }

        if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
                BT_ERR("%s invalid SCO descriptors", hdev->name);
                return -ENODEV;
        }

        return 0;
}

static void btusb_work(struct work_struct *work)
{
        struct btusb_data *data = container_of(work, struct btusb_data, work);
        struct hci_dev *hdev = data->hdev;
        int new_alts;
        int err;

        if (data->sco_num > 0) {
                if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
                        err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
                        if (err < 0) {
                                clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
                                usb_kill_anchored_urbs(&data->isoc_anchor);
                                return;
                        }

                        set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
                }

                if (hdev->voice_setting & 0x0020) {
                        static const int alts[3] = { 2, 4, 5 };

                        new_alts = alts[data->sco_num - 1];
                } else {
                        new_alts = data->sco_num;
                }

                if (data->isoc_altsetting != new_alts) {
                        unsigned long flags;

                        clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
                        usb_kill_anchored_urbs(&data->isoc_anchor);

                        /* When isochronous alternate setting needs to be
                         * changed, because SCO connection has been added
                         * or removed, a packet fragment may be left in the
                         * reassembling state. This could lead to wrongly
                         * assembled fragments.
                         *
                         * Clear outstanding fragment when selecting a new
                         * alternate setting.
                         */
                        spin_lock_irqsave(&data->rxlock, flags);
                        kfree_skb(data->sco_skb);
                        data->sco_skb = NULL;
                        spin_unlock_irqrestore(&data->rxlock, flags);

                        if (__set_isoc_interface(hdev, new_alts) < 0)
                                return;
                }

                if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
                        if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
                                clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
                        else
                                btusb_submit_isoc_urb(hdev, GFP_KERNEL);
                }
        } else {
                clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
                usb_kill_anchored_urbs(&data->isoc_anchor);

                __set_isoc_interface(hdev, 0);
                if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
                        usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
        }
}

static void btusb_waker(struct work_struct *work)
{
        struct btusb_data *data = container_of(work, struct btusb_data, waker);
        int err;

        err = usb_autopm_get_interface(data->intf);
        if (err < 0)
                return;

        usb_autopm_put_interface(data->intf);
}

static int btusb_setup_bcm92035(struct hci_dev *hdev)
{
        struct sk_buff *skb;
        u8 val = 0x00;

        BT_DBG("%s", hdev->name);

        skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
        if (IS_ERR(skb))
                BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
        else
                kfree_skb(skb);

        return 0;
}

static int btusb_setup_csr(struct hci_dev *hdev)
{
        struct hci_rp_read_local_version *rp;
        struct sk_buff *skb;

        BT_DBG("%s", hdev->name);

        skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
                             HCI_INIT_TIMEOUT);
        if (IS_ERR(skb)) {
                int err = PTR_ERR(skb);
                BT_ERR("%s: CSR: Local version failed (%d)", hdev->name, err);
                return err;
        }

        if (skb->len != sizeof(struct hci_rp_read_local_version)) {
                BT_ERR("%s: CSR: Local version length mismatch", hdev->name);
                kfree_skb(skb);
                return -EIO;
        }

        rp = (struct hci_rp_read_local_version *)skb->data;

        /* Detect controllers which aren't real CSR ones. */
        if (le16_to_cpu(rp->manufacturer) != 10 ||
            le16_to_cpu(rp->lmp_subver) == 0x0c5c) {
                /* Clear the reset quirk since this is not an actual
                 * early Bluetooth 1.1 device from CSR.
                 */
                clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);

                /* These fake CSR controllers have all a broken
                 * stored link key handling and so just disable it.
                 */
                set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
        }

        kfree_skb(skb);

        return 0;
}

static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
                                                       struct intel_version *ver)
{
        const struct firmware *fw;
        char fwname[64];
        int ret;

        snprintf(fwname, sizeof(fwname),
                 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
                 ver->hw_platform, ver->hw_variant, ver->hw_revision,
                 ver->fw_variant,  ver->fw_revision, ver->fw_build_num,
                 ver->fw_build_ww, ver->fw_build_yy);

        ret = request_firmware(&fw, fwname, &hdev->dev);
        if (ret < 0) {
                if (ret == -EINVAL) {
                        BT_ERR("%s Intel firmware file request failed (%d)",
                               hdev->name, ret);
                        return NULL;
                }

                BT_ERR("%s failed to open Intel firmware file: %s(%d)",
                       hdev->name, fwname, ret);

                /* If the correct firmware patch file is not found, use the
                 * default firmware patch file instead
                 */
                snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
                         ver->hw_platform, ver->hw_variant);
                if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
                        BT_ERR("%s failed to open default Intel fw file: %s",
                               hdev->name, fwname);
                        return NULL;
                }
        }

        BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname);

        return fw;
}

static int btusb_setup_intel_patching(struct hci_dev *hdev,
                                      const struct firmware *fw,
                                      const u8 **fw_ptr, int *disable_patch)
{
        struct sk_buff *skb;
        struct hci_command_hdr *cmd;
        const u8 *cmd_param;
        struct hci_event_hdr *evt = NULL;
        const u8 *evt_param = NULL;
        int remain = fw->size - (*fw_ptr - fw->data);

        /* The first byte indicates the types of the patch command or event.
         * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
         * in the current firmware buffer doesn't start with 0x01 or
         * the size of remain buffer is smaller than HCI command header,
         * the firmware file is corrupted and it should stop the patching
         * process.
         */
        if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
                BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
                return -EINVAL;
        }
        (*fw_ptr)++;
        remain--;

        cmd = (struct hci_command_hdr *)(*fw_ptr);
        *fw_ptr += sizeof(*cmd);
        remain -= sizeof(*cmd);

        /* Ensure that the remain firmware data is long enough than the length
         * of command parameter. If not, the firmware file is corrupted.
         */
        if (remain < cmd->plen) {
                BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
                return -EFAULT;
        }

        /* If there is a command that loads a patch in the firmware
         * file, then enable the patch upon success, otherwise just
         * disable the manufacturer mode, for example patch activation
         * is not required when the default firmware patch file is used
         * because there are no patch data to load.
         */
        if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
                *disable_patch = 0;

        cmd_param = *fw_ptr;
        *fw_ptr += cmd->plen;
        remain -= cmd->plen;

        /* This reads the expected events when the above command is sent to the
         * device. Some vendor commands expects more than one events, for
         * example command status event followed by vendor specific event.
         * For this case, it only keeps the last expected event. so the command
         * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
         * last expected event.
         */
        while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
                (*fw_ptr)++;
                remain--;

                evt = (struct hci_event_hdr *)(*fw_ptr);
                *fw_ptr += sizeof(*evt);
                remain -= sizeof(*evt);

                if (remain < evt->plen) {
                        BT_ERR("%s Intel fw corrupted: invalid evt len",
                               hdev->name);
                        return -EFAULT;
                }

                evt_param = *fw_ptr;
                *fw_ptr += evt->plen;
                remain -= evt->plen;
        }

        /* Every HCI commands in the firmware file has its correspond event.
         * If event is not found or remain is smaller than zero, the firmware
         * file is corrupted.
         */
        if (!evt || !evt_param || remain < 0) {
                BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
                return -EFAULT;
        }

        skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
                                cmd_param, evt->evt, HCI_INIT_TIMEOUT);
        if (IS_ERR(skb)) {
                BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
                       hdev->name, cmd->opcode, PTR_ERR(skb));
                return PTR_ERR(skb);
        }

        /* It ensures that the returned event matches the event data read from
         * the firmware file. At fist, it checks the length and then
         * the contents of the event.
         */
        if (skb->len != evt->plen) {
                BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
                       le16_to_cpu(cmd->opcode));
                kfree_skb(skb);
                return -EFAULT;
        }

        if (memcmp(skb->data, evt_param, evt->plen)) {
                BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
                       hdev->name, le16_to_cpu(cmd->opcode));
                kfree_skb(skb);
                return -EFAULT;
        }
        kfree_skb(skb);

        return 0;
}

static int btusb_setup_intel(struct hci_dev *hdev)
{
        struct sk_buff *skb;
        const struct firmware *fw;
        const u8 *fw_ptr;
        int disable_patch, err;
        struct intel_version ver;

        BT_DBG("%s", hdev->name);

        /* The controller has a bug with the first HCI command sent to it
         * returning number of completed commands as zero. This would stall the
         * command processing in the Bluetooth core.
         *
         * As a workaround, send HCI Reset command first which will reset the
         * number of completed commands and allow normal command processing
         * from now on.
         */
        skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
        if (IS_ERR(skb)) {
                BT_ERR("%s sending initial HCI reset command failed (%ld)",
                       hdev->name, PTR_ERR(skb));
                return PTR_ERR(skb);
        }
        kfree_skb(skb);

        /* Read Intel specific controller version first to allow selection of
         * which firmware file to load.
         *
         * The returned information are hardware variant and revision plus
         * firmware variant, revision and build number.
         */
        err = btintel_read_version(hdev, &ver);
        if (err)
                return err;

        BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
                hdev->name, ver.hw_platform, ver.hw_variant, ver.hw_revision,
                ver.fw_variant,  ver.fw_revision, ver.fw_build_num,
                ver.fw_build_ww, ver.fw_build_yy, ver.fw_patch_num);

        /* fw_patch_num indicates the version of patch the device currently
         * have. If there is no patch data in the device, it is always 0x00.
         * So, if it is other than 0x00, no need to patch the device again.
         */
        if (ver.fw_patch_num) {
                BT_INFO("%s: Intel device is already patched. patch num: %02x",
                        hdev->name, ver.fw_patch_num);
                goto complete;
        }

        /* Opens the firmware patch file based on the firmware version read
         * from the controller. If it fails to open the matching firmware
         * patch file, it tries to open the default firmware patch file.
         * If no patch file is found, allow the device to operate without
         * a patch.
         */
        fw = btusb_setup_intel_get_fw(hdev, &ver);
        if (!fw)
                goto complete;
        fw_ptr = fw->data;

        /* Enable the manufacturer mode of the controller.
         * Only while this mode is enabled, the driver can download the
         * firmware patch data and configuration parameters.
         */
        err = btintel_enter_mfg(hdev);
        if (err) {
                release_firmware(fw);
                return err;
        }

        disable_patch = 1;

        /* The firmware data file consists of list of Intel specific HCI
         * commands and its expected events. The first byte indicates the
         * type of the message, either HCI command or HCI event.
         *
         * It reads the command and its expected event from the firmware file,
         * and send to the controller. Once __hci_cmd_sync_ev() returns,
         * the returned event is compared with the event read from the firmware
         * file and it will continue until all the messages are downloaded to
         * the controller.
         *
         * Once the firmware patching is completed successfully,
         * the manufacturer mode is disabled with reset and activating the
         * downloaded patch.
         *
         * If the firmware patching fails, the manufacturer mode is
         * disabled with reset and deactivating the patch.
         *
         * If the default patch file is used, no reset is done when disabling
         * the manufacturer.
         */
        while (fw->size > fw_ptr - fw->data) {
                int ret;

                ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
                                                 &disable_patch);
                if (ret < 0)
                        goto exit_mfg_deactivate;
        }

        release_firmware(fw);

        if (disable_patch)
                goto exit_mfg_disable;

        /* Patching completed successfully and disable the manufacturer mode
         * with reset and activate the downloaded firmware patches.
         */
        err = btintel_exit_mfg(hdev, true, true);
        if (err)
                return err;

        BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
                hdev->name);

        goto complete;

exit_mfg_disable:
        /* Disable the manufacturer mode without reset */
        err = btintel_exit_mfg(hdev, false, false);
        if (err)
                return err;

        BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);

        goto complete;

exit_mfg_deactivate:
        release_firmware(fw);

        /* Patching failed. Disable the manufacturer mode with reset and
         * deactivate the downloaded firmware patches.
         */
        err = btintel_exit_mfg(hdev, true, false);
        if (err)
                return err;

        BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
                hdev->name);

complete:
        /* Set the event mask for Intel specific vendor events. This enables
         * a few extra events that are useful during general operation.
         */
        btintel_set_event_mask_mfg(hdev, false);

        btintel_check_bdaddr(hdev);
        return 0;
}

static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
{
        struct sk_buff *skb;
        struct hci_event_hdr *hdr;
        struct hci_ev_cmd_complete *evt;

        skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
        if (!skb)
                return -ENOMEM;

        hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
        hdr->evt = HCI_EV_CMD_COMPLETE;
        hdr->plen = sizeof(*evt) + 1;

        evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
        evt->ncmd = 0x01;
        evt->opcode = cpu_to_le16(opcode);

        *skb_put(skb, 1) = 0x00;

        hci_skb_pkt_type(skb) = HCI_EVENT_PKT;

        return hci_recv_frame(hdev, skb);
}

static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
                                 int count)
{
        /* When the device is in bootloader mode, then it can send
         * events via the bulk endpoint. These events are treated the
         * same way as the ones received from the interrupt endpoint.
         */
        if (test_bit(BTUSB_BOOTLOADER, &data->flags))
                return btusb_recv_intr(data, buffer, count);

        return btusb_recv_bulk(data, buffer, count);
}

static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
                               unsigned int len)
{
        const struct intel_bootup *evt = ptr;

        if (len != sizeof(*evt))
                return;

        if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
                smp_mb__after_atomic();
                wake_up_bit(&data->flags, BTUSB_BOOTING);
        }
}

static void btusb_intel_secure_send_result(struct btusb_data *data,
                                           const void *ptr, unsigned int len)
{
        const struct intel_secure_send_result *evt = ptr;

        if (len != sizeof(*evt))
                return;

        if (evt->result)
                set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);

        if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
            test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
                smp_mb__after_atomic();
                wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
        }
}

static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
{
        struct btusb_data *data = hci_get_drvdata(hdev);

        if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
                struct hci_event_hdr *hdr = (void *)skb->data;

                if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
                    hdr->plen > 0) {
                        const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
                        unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;

                        switch (skb->data[2]) {
                        case 0x02:
                                /* When switching to the operational firmware
                                 * the device sends a vendor specific event
                                 * indicating that the bootup completed.
                                 */
                                btusb_intel_bootup(data, ptr, len);
                                break;
                        case 0x06:
                                /* When the firmware loading completes the
                                 * device sends out a vendor specific event
                                 * indicating the result of the firmware
                                 * loading.
                                 */
                                btusb_intel_secure_send_result(data, ptr, len);
                                break;
                        }
                }
        }

        return hci_recv_frame(hdev, skb);
}

static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct urb *urb;

        BT_DBG("%s", hdev->name);

        switch (hci_skb_pkt_type(skb)) {
        case HCI_COMMAND_PKT:
                if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
                        struct hci_command_hdr *cmd = (void *)skb->data;
                        __u16 opcode = le16_to_cpu(cmd->opcode);

                        /* When in bootloader mode and the command 0xfc09
                         * is received, it needs to be send down the
                         * bulk endpoint. So allocate a bulk URB instead.
                         */
                        if (opcode == 0xfc09)
                                urb = alloc_bulk_urb(hdev, skb);
                        else
                                urb = alloc_ctrl_urb(hdev, skb);

                        /* When the 0xfc01 command is issued to boot into
                         * the operational firmware, it will actually not
                         * send a command complete event. To keep the flow
                         * control working inject that event here.
                         */
                        if (opcode == 0xfc01)
                                inject_cmd_complete(hdev, opcode);
                } else {
                        urb = alloc_ctrl_urb(hdev, skb);
                }
                if (IS_ERR(urb))
                        return PTR_ERR(urb);

                hdev->stat.cmd_tx++;
                return submit_or_queue_tx_urb(hdev, urb);

        case HCI_ACLDATA_PKT:
                urb = alloc_bulk_urb(hdev, skb);
                if (IS_ERR(urb))
                        return PTR_ERR(urb);

                hdev->stat.acl_tx++;
                return submit_or_queue_tx_urb(hdev, urb);

        case HCI_SCODATA_PKT:
                if (hci_conn_num(hdev, SCO_LINK) < 1)
                        return -ENODEV;

                urb = alloc_isoc_urb(hdev, skb);
                if (IS_ERR(urb))
                        return PTR_ERR(urb);

                hdev->stat.sco_tx++;
                return submit_tx_urb(hdev, urb);
        }

        return -EILSEQ;
}

static int btusb_setup_intel_new(struct hci_dev *hdev)
{
        static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
                                          0x00, 0x08, 0x04, 0x00 };
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct sk_buff *skb;
        struct intel_version ver;
        struct intel_boot_params *params;
        const struct firmware *fw;
        const u8 *fw_ptr;
        u32 frag_len;
        char fwname[64];
        ktime_t calltime, delta, rettime;
        unsigned long long duration;
        int err;

        BT_DBG("%s", hdev->name);

        calltime = ktime_get();

        /* Read the Intel version information to determine if the device
         * is in bootloader mode or if it already has operational firmware
         * loaded.
         */
        err = btintel_read_version(hdev, &ver);
        if (err)
                return err;

        /* The hardware platform number has a fixed value of 0x37 and
         * for now only accept this single value.
         */
        if (ver.hw_platform != 0x37) {
                BT_ERR("%s: Unsupported Intel hardware platform (%u)",
                       hdev->name, ver.hw_platform);
                return -EINVAL;
        }

        /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is

         * supported by this firmware loading method. This check has been
         * put in place to ensure correct forward compatibility options
         * when newer hardware variants come along.
         */
        if (ver.hw_variant != 0x0b) {
                BT_ERR("%s: Unsupported Intel hardware variant (%u)",
                       hdev->name, ver.hw_variant);
                return -EINVAL;
        }

        btintel_version_info(hdev, &ver);

        /* The firmware variant determines if the device is in bootloader
         * mode or is running operational firmware. The value 0x06 identifies
         * the bootloader and the value 0x23 identifies the operational
         * firmware.
         *
         * When the operational firmware is already present, then only
         * the check for valid Bluetooth device address is needed. This
         * determines if the device will be added as configured or
         * unconfigured controller.
         *
         * It is not possible to use the Secure Boot Parameters in this
         * case since that command is only available in bootloader mode.
         */
        if (ver.fw_variant == 0x23) {
                clear_bit(BTUSB_BOOTLOADER, &data->flags);
                btintel_check_bdaddr(hdev);
                return 0;
        }

        /* If the device is not in bootloader mode, then the only possible
         * choice is to return an error and abort the device initialization.
         */
        if (ver.fw_variant != 0x06) {
                BT_ERR("%s: Unsupported Intel firmware variant (%u)",
                       hdev->name, ver.fw_variant);
                return -ENODEV;
        }

        /* Read the secure boot parameters to identify the operating
         * details of the bootloader.
         */
        skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
        if (IS_ERR(skb)) {
                BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
                       hdev->name, PTR_ERR(skb));
                return PTR_ERR(skb);
        }

        if (skb->len != sizeof(*params)) {
                BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
                kfree_skb(skb);
                return -EILSEQ;
        }

        params = (struct intel_boot_params *)skb->data;

        BT_INFO("%s: Device revision is %u", hdev->name,
                le16_to_cpu(params->dev_revid));

        BT_INFO("%s: Secure boot is %s", hdev->name,
                params->secure_boot ? "enabled" : "disabled");

        BT_INFO("%s: OTP lock is %s", hdev->name,
                params->otp_lock ? "enabled" : "disabled");

        BT_INFO("%s: API lock is %s", hdev->name,
                params->api_lock ? "enabled" : "disabled");

        BT_INFO("%s: Debug lock is %s", hdev->name,
                params->debug_lock ? "enabled" : "disabled");

        BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
                params->min_fw_build_nn, params->min_fw_build_cw,
                2000 + params->min_fw_build_yy);

        /* It is required that every single firmware fragment is acknowledged
         * with a command complete event. If the boot parameters indicate
         * that this bootloader does not send them, then abort the setup.
         */
        if (params->limited_cce != 0x00) {
                BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
                       hdev->name, params->limited_cce);
                kfree_skb(skb);
                return -EINVAL;
        }

        /* If the OTP has no valid Bluetooth device address, then there will
         * also be no valid address for the operational firmware.
         */
        if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
                BT_INFO("%s: No device address configured", hdev->name);
                set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
        }

        /* With this Intel bootloader only the hardware variant and device
         * revision information are used to select the right firmware.
         *
         * Currently this bootloader support is limited to hardware variant
         * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
         */
        snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
                 le16_to_cpu(params->dev_revid));

        err = request_firmware(&fw, fwname, &hdev->dev);
        if (err < 0) {
                BT_ERR("%s: Failed to load Intel firmware file (%d)",
                       hdev->name, err);
                kfree_skb(skb);
                return err;
        }

        BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);

        /* Save the DDC file name for later use to apply once the firmware
         * downloading is done.
         */
        snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
                 le16_to_cpu(params->dev_revid));

        kfree_skb(skb);

        if (fw->size < 644) {
                BT_ERR("%s: Invalid size of firmware file (%zu)",
                       hdev->name, fw->size);
                err = -EBADF;
                goto done;
        }

        set_bit(BTUSB_DOWNLOADING, &data->flags);

        /* Start the firmware download transaction with the Init fragment
         * represented by the 128 bytes of CSS header.
         */
        err = btintel_secure_send(hdev, 0x00, 128, fw->data);
        if (err < 0) {
                BT_ERR("%s: Failed to send firmware header (%d)",
                       hdev->name, err);
                goto done;
        }

        /* Send the 256 bytes of public key information from the firmware
         * as the PKey fragment.
         */
        err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
        if (err < 0) {
                BT_ERR("%s: Failed to send firmware public key (%d)",
                       hdev->name, err);
                goto done;
        }

        /* Send the 256 bytes of signature information from the firmware
         * as the Sign fragment.
         */
        err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
        if (err < 0) {
                BT_ERR("%s: Failed to send firmware signature (%d)",
                       hdev->name, err);
                goto done;
        }

        fw_ptr = fw->data + 644;
        frag_len = 0;

        while (fw_ptr - fw->data < fw->size) {
                struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);

                frag_len += sizeof(*cmd) + cmd->plen;

                /* The parameter length of the secure send command requires
                 * a 4 byte alignment. It happens so that the firmware file
                 * contains proper Intel_NOP commands to align the fragments
                 * as needed.
                 *
                 * Send set of commands with 4 byte alignment from the
                 * firmware data buffer as a single Data fragement.
                 */
                if (!(frag_len % 4)) {
                        err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
                        if (err < 0) {
                                BT_ERR("%s: Failed to send firmware data (%d)",
                                       hdev->name, err);
                                goto done;
                        }

                        fw_ptr += frag_len;
                        frag_len = 0;
                }
        }

        set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);

        BT_INFO("%s: Waiting for firmware download to complete", hdev->name);

        /* Before switching the device into operational mode and with that
         * booting the loaded firmware, wait for the bootloader notification
         * that all fragments have been successfully received.
         *
         * When the event processing receives the notification, then the
         * BTUSB_DOWNLOADING flag will be cleared.
         *
         * The firmware loading should not take longer than 5 seconds
         * and thus just timeout if that happens and fail the setup
         * of this device.
         */
        err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
                                  TASK_INTERRUPTIBLE,
                                  msecs_to_jiffies(5000));
        if (err == 1) {
                BT_ERR("%s: Firmware loading interrupted", hdev->name);
                err = -EINTR;
                goto done;
        }

        if (err) {
                BT_ERR("%s: Firmware loading timeout", hdev->name);
                err = -ETIMEDOUT;
                goto done;
        }

        if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
                BT_ERR("%s: Firmware loading failed", hdev->name);
                err = -ENOEXEC;
                goto done;
        }

        rettime = ktime_get();
        delta = ktime_sub(rettime, calltime);
        duration = (unsigned long long) ktime_to_ns(delta) >> 10;

        BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);

done:
        release_firmware(fw);

        if (err < 0)
                return err;

        calltime = ktime_get();

        set_bit(BTUSB_BOOTING, &data->flags);

        skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
                             HCI_INIT_TIMEOUT);
        if (IS_ERR(skb))
                return PTR_ERR(skb);

        kfree_skb(skb);

        /* The bootloader will not indicate when the device is ready. This
         * is done by the operational firmware sending bootup notification.
         *
         * Booting into operational firmware should not take longer than
         * 1 second. However if that happens, then just fail the setup
         * since something went wrong.
         */
        BT_INFO("%s: Waiting for device to boot", hdev->name);

        err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
                                  TASK_INTERRUPTIBLE,
                                  msecs_to_jiffies(1000));

        if (err == 1) {
                BT_ERR("%s: Device boot interrupted", hdev->name);
                return -EINTR;
        }

        if (err) {
                BT_ERR("%s: Device boot timeout", hdev->name);
                return -ETIMEDOUT;
        }

        rettime = ktime_get();
        delta = ktime_sub(rettime, calltime);
        duration = (unsigned long long) ktime_to_ns(delta) >> 10;

        BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);

        clear_bit(BTUSB_BOOTLOADER, &data->flags);

        /* Once the device is running in operational mode, it needs to apply
         * the device configuration (DDC) parameters.
         *
         * The device can work without DDC parameters, so even if it fails
         * to load the file, no need to fail the setup.
         */
        btintel_load_ddc_config(hdev, fwname);

        /* Set the event mask for Intel specific vendor events. This enables
         * a few extra events that are useful during general operation. It
         * does not enable any debugging related events.
         *
         * The device will function correctly without these events enabled
         * and thus no need to fail the setup.
         */
        btintel_set_event_mask(hdev, false);

        return 0;
}

static int btusb_shutdown_intel(struct hci_dev *hdev)
{
        struct sk_buff *skb;
        long ret;

        /* Some platforms have an issue with BT LED when the interface is
         * down or BT radio is turned off, which takes 5 seconds to BT LED
         * goes off. This command turns off the BT LED immediately.
         */
        skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
        if (IS_ERR(skb)) {
                ret = PTR_ERR(skb);
                BT_ERR("%s: turning off Intel device LED failed (%ld)",
                       hdev->name, ret);
                return ret;
        }
        kfree_skb(skb);

        return 0;
}

static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
                                    const bdaddr_t *bdaddr)
{
        struct sk_buff *skb;
        u8 buf[8];
        long ret;

        buf[0] = 0xfe;
        buf[1] = sizeof(bdaddr_t);
        memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));

        skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
        if (IS_ERR(skb)) {
                ret = PTR_ERR(skb);
                BT_ERR("%s: changing Marvell device address failed (%ld)",
                       hdev->name, ret);
                return ret;
        }
        kfree_skb(skb);

        return 0;
}

static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
                                    const bdaddr_t *bdaddr)
{
        struct sk_buff *skb;
        u8 buf[10];
        long ret;

        buf[0] = 0x01;
        buf[1] = 0x01;
        buf[2] = 0x00;
        buf[3] = sizeof(bdaddr_t);
        memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));

        skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
        if (IS_ERR(skb)) {
                ret = PTR_ERR(skb);
                BT_ERR("%s: Change address command failed (%ld)",
                       hdev->name, ret);
                return ret;
        }
        kfree_skb(skb);

        return 0;
}

#define QCA_DFU_PACKET_LEN      4096

#define QCA_GET_TARGET_VERSION  0x09
#define QCA_CHECK_STATUS        0x05
#define QCA_DFU_DOWNLOAD        0x01

#define QCA_SYSCFG_UPDATED      0x40
#define QCA_PATCH_UPDATED       0x80
#define QCA_DFU_TIMEOUT         3000

struct qca_version {
        __le32  rom_version;
        __le32  patch_version;
        __le32  ram_version;
        __le32  ref_clock;
        __u8    reserved[4];
} __packed;

struct qca_rampatch_version {
        __le16  rom_version;
        __le16  patch_version;
} __packed;

struct qca_device_info {
        u32     rom_version;
        u8      rampatch_hdr;   /* length of header in rampatch */
        u8      nvm_hdr;        /* length of header in NVM */
        u8      ver_offset;     /* offset of version structure in rampatch */
};

static const struct qca_device_info qca_devices_table[] = {
        { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
        { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
        { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
        { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
        { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
        { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
};

static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request,
                                     void *data, u16 size)
{
        struct btusb_data *btdata = hci_get_drvdata(hdev);
        struct usb_device *udev = btdata->udev;
        int pipe, err;
        u8 *buf;

        buf = kmalloc(size, GFP_KERNEL);
        if (!buf)
                return -ENOMEM;

        /* Found some of USB hosts have IOT issues with ours so that we should
         * not wait until HCI layer is ready.
         */
        pipe = usb_rcvctrlpipe(udev, 0);
        err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
                              0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
        if (err < 0) {
                BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err);
                goto done;
        }

        memcpy(data, buf, size);

done:
        kfree(buf);

        return err;
}

static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
                                       const struct firmware *firmware,
                                       size_t hdr_size)
{
        struct btusb_data *btdata = hci_get_drvdata(hdev);
        struct usb_device *udev = btdata->udev;
        size_t count, size, sent = 0;
        int pipe, len, err;
        u8 *buf;

        buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
        if (!buf)
                return -ENOMEM;

        count = firmware->size;

        size = min_t(size_t, count, hdr_size);
        memcpy(buf, firmware->data, size);

        /* USB patches should go down to controller through USB path
         * because binary format fits to go down through USB channel.
         * USB control path is for patching headers and USB bulk is for
         * patch body.
         */
        pipe = usb_sndctrlpipe(udev, 0);
        err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
                              0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
        if (err < 0) {
                BT_ERR("%s: Failed to send headers (%d)", hdev->name, err);
                goto done;
        }

        sent += size;
        count -= size;

        while (count) {
                size = min_t(size_t, count, QCA_DFU_PACKET_LEN);

                memcpy(buf, firmware->data + sent, size);

                pipe = usb_sndbulkpipe(udev, 0x02);
                err = usb_bulk_msg(udev, pipe, buf, size, &len,
                                   QCA_DFU_TIMEOUT);
                if (err < 0) {
                        BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
                               hdev->name, sent, firmware->size, err);
                        break;
                }

                if (size != len) {
                        BT_ERR("%s: Failed to get bulk buffer", hdev->name);
                        err = -EILSEQ;
                        break;
                }

                sent  += size;
                count -= size;
        }

done:
        kfree(buf);
        return err;
}

static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
                                         struct qca_version *ver,
                                         const struct qca_device_info *info)
{
        struct qca_rampatch_version *rver;
        const struct firmware *fw;
        u32 ver_rom, ver_patch;
        u16 rver_rom, rver_patch;
        char fwname[64];
        int err;

        ver_rom = le32_to_cpu(ver->rom_version);
        ver_patch = le32_to_cpu(ver->patch_version);

        snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);

        err = request_firmware(&fw, fwname, &hdev->dev);
        if (err) {
                BT_ERR("%s: failed to request rampatch file: %s (%d)",
                       hdev->name, fwname, err);
                return err;
        }

        BT_INFO("%s: using rampatch file: %s", hdev->name, fwname);

        rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
        rver_rom = le16_to_cpu(rver->rom_version);
        rver_patch = le16_to_cpu(rver->patch_version);

        BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
                "build 0x%x", hdev->name, rver_rom, rver_patch, ver_rom,
                ver_patch);

        if (rver_rom != ver_rom || rver_patch <= ver_patch) {
                BT_ERR("%s: rampatch file version did not match with firmware",
                       hdev->name);
                err = -EINVAL;
                goto done;
        }

        err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);

done:
        release_firmware(fw);

        return err;
}

static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
                                    struct qca_version *ver,
                                    const struct qca_device_info *info)
{
        const struct firmware *fw;
        char fwname[64];
        int err;

        snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
                 le32_to_cpu(ver->rom_version));

        err = request_firmware(&fw, fwname, &hdev->dev);
        if (err) {
                BT_ERR("%s: failed to request NVM file: %s (%d)",
                       hdev->name, fwname, err);
                return err;
        }

        BT_INFO("%s: using NVM file: %s", hdev->name, fwname);

        err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);

        release_firmware(fw);

        return err;
}

static int btusb_setup_qca(struct hci_dev *hdev)
{
        const struct qca_device_info *info = NULL;
        struct qca_version ver;
        u32 ver_rom;
        u8 status;
        int i, err;

        err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
                                        sizeof(ver));
        if (err < 0)
                return err;

        ver_rom = le32_to_cpu(ver.rom_version);
        for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
                if (ver_rom == qca_devices_table[i].rom_version)
                        info = &qca_devices_table[i];
        }
        if (!info) {
                BT_ERR("%s: don't support firmware rome 0x%x", hdev->name,
                       ver_rom);
                return -ENODEV;
        }

        err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status,
                                        sizeof(status));
        if (err < 0)
                return err;

        if (!(status & QCA_PATCH_UPDATED)) {
                err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
                if (err < 0)
                        return err;
        }

        if (!(status & QCA_SYSCFG_UPDATED)) {
                err = btusb_setup_qca_load_nvm(hdev, &ver, info);
                if (err < 0)
                        return err;
        }

        return 0;
}

#ifdef CONFIG_BT_HCIBTUSB_BCM
static inline int __set_diag_interface(struct hci_dev *hdev)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct usb_interface *intf = data->diag;
        int i;

        if (!data->diag)
                return -ENODEV;

        data->diag_tx_ep = NULL;
        data->diag_rx_ep = NULL;

        for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
                struct usb_endpoint_descriptor *ep_desc;

                ep_desc = &intf->cur_altsetting->endpoint[i].desc;

                if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
                        data->diag_tx_ep = ep_desc;
                        continue;
                }

                if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
                        data->diag_rx_ep = ep_desc;
                        continue;
                }
        }

        if (!data->diag_tx_ep || !data->diag_rx_ep) {
                BT_ERR("%s invalid diagnostic descriptors", hdev->name);
                return -ENODEV;
        }

        return 0;
}

static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct sk_buff *skb;
        struct urb *urb;
        unsigned int pipe;

        if (!data->diag_tx_ep)
                return ERR_PTR(-ENODEV);

        urb = usb_alloc_urb(0, GFP_KERNEL);
        if (!urb)
                return ERR_PTR(-ENOMEM);

        skb = bt_skb_alloc(2, GFP_KERNEL);
        if (!skb) {
                usb_free_urb(urb);
                return ERR_PTR(-ENOMEM);
        }

        *skb_put(skb, 1) = 0xf0;
        *skb_put(skb, 1) = enable;

        pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress);

        usb_fill_bulk_urb(urb, data->udev, pipe,
                          skb->data, skb->len, btusb_tx_complete, skb);

        skb->dev = (void *)hdev;

        return urb;
}

static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
{
        struct btusb_data *data = hci_get_drvdata(hdev);
        struct urb *urb;

        if (!data->diag)
                return -ENODEV;

        if (!test_bit(HCI_RUNNING, &hdev->flags))
                return -ENETDOWN;

        urb = alloc_diag_urb(hdev, enable);
        if (IS_ERR(urb))
                return PTR_ERR(urb);

        return submit_or_queue_tx_urb(hdev, urb);
}
#endif

static int btusb_probe(struct usb_interface *intf,
                       const struct usb_device_id *id)
{
        struct usb_endpoint_descriptor *ep_desc;
        struct btusb_data *data;
        struct hci_dev *hdev;
        unsigned ifnum_base;
        int i, err;

        BT_DBG("intf %p id %p", intf, id);

        /* interface numbers are hardcoded in the spec */
        if (intf->cur_altsetting->desc.bInterfaceNumber != 0) {
                if (!(id->driver_info & BTUSB_IFNUM_2))
                        return -ENODEV;
                if (intf->cur_altsetting->desc.bInterfaceNumber != 2)
                        return -ENODEV;
        }

        ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber;

        if (!id->driver_info) {
                const struct usb_device_id *match;

                match = usb_match_id(intf, blacklist_table);
                if (match)
                        id = match;
        }

        if (id->driver_info == BTUSB_IGNORE)
                return -ENODEV;

        if (id->driver_info & BTUSB_ATH3012) {
                struct usb_device *udev = interface_to_usbdev(intf);

                /* Old firmware would otherwise let ath3k driver load
                 * patch and sysconfig files */
                if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
                        return -ENODEV;
        }

        data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
                ep_desc = &intf->cur_altsetting->endpoint[i].desc;

                if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
                        data->intr_ep = ep_desc;
                        continue;
                }

                if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
                        data->bulk_tx_ep = ep_desc;
                        continue;
                }

                if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
                        data->bulk_rx_ep = ep_desc;
                        continue;
                }
        }

        if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
                return -ENODEV;

        if (id->driver_info & BTUSB_AMP) {
                data->cmdreq_type = USB_TYPE_CLASS | 0x01;
                data->cmdreq = 0x2b;
        } else {
                data->cmdreq_type = USB_TYPE_CLASS;
                data->cmdreq = 0x00;
        }

        data->udev = interface_to_usbdev(intf);
        data->intf = intf;

        INIT_WORK(&data->work, btusb_work);
        INIT_WORK(&data->waker, btusb_waker);
        init_usb_anchor(&data->deferred);
        init_usb_anchor(&data->tx_anchor);
        spin_lock_init(&data->txlock);

        init_usb_anchor(&data->intr_anchor);
        init_usb_anchor(&data->bulk_anchor);
        init_usb_anchor(&data->isoc_anchor);
        init_usb_anchor(&data->diag_anchor);
        spin_lock_init(&data->rxlock);

        if (id->driver_info & BTUSB_INTEL_NEW) {
                data->recv_event = btusb_recv_event_intel;
                data->recv_bulk = btusb_recv_bulk_intel;
                set_bit(BTUSB_BOOTLOADER, &data->flags);
        } else {
                data->recv_event = hci_recv_frame;
                data->recv_bulk = btusb_recv_bulk;
        }

        hdev = hci_alloc_dev();
        if (!hdev)
                return -ENOMEM;

        hdev->bus = HCI_USB;
        hci_set_drvdata(hdev, data);

        if (id->driver_info & BTUSB_AMP)
                hdev->dev_type = HCI_AMP;
        else
                hdev->dev_type = HCI_BREDR;

        data->hdev = hdev;

        SET_HCIDEV_DEV(hdev, &intf->dev);

        hdev->open   = btusb_open;
        hdev->close  = btusb_close;
        hdev->flush  = btusb_flush;
        hdev->send   = btusb_send_frame;
        hdev->notify = btusb_notify;

        if (id->driver_info & BTUSB_BCM2045)
                set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);

        if (id->driver_info & BTUSB_BCM92035)
                hdev->setup = btusb_setup_bcm92035;

#ifdef CONFIG_BT_HCIBTUSB_BCM
        if (id->driver_info & BTUSB_BCM_PATCHRAM) {
                hdev->manufacturer = 15;
                hdev->setup = btbcm_setup_patchram;
                hdev->set_diag = btusb_bcm_set_diag;
                hdev->set_bdaddr = btbcm_set_bdaddr;

                /* Broadcom LM_DIAG Interface numbers are hardcoded */
                data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
        }

        if (id->driver_info & BTUSB_BCM_APPLE) {
                hdev->manufacturer = 15;
                hdev->setup = btbcm_setup_apple;
                hdev->set_diag = btusb_bcm_set_diag;

                /* Broadcom LM_DIAG Interface numbers are hardcoded */
                data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
        }
#endif

        if (id->driver_info & BTUSB_INTEL) {
                hdev->manufacturer = 2;
                hdev->setup = btusb_setup_intel;
                hdev->shutdown = btusb_shutdown_intel;
                hdev->set_diag = btintel_set_diag_mfg;
                hdev->set_bdaddr = btintel_set_bdaddr;
                set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
                set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
                set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
        }

        if (id->driver_info & BTUSB_INTEL_NEW) {
                hdev->manufacturer = 2;
                hdev->send = btusb_send_frame_intel;
                hdev->setup = btusb_setup_intel_new;
                hdev->hw_error = btintel_hw_error;
                hdev->set_diag = btintel_set_diag;
                hdev->set_bdaddr = btintel_set_bdaddr;
                set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
                set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
        }

        if (id->driver_info & BTUSB_MARVELL)
                hdev->set_bdaddr = btusb_set_bdaddr_marvell;

        if (id->driver_info & BTUSB_SWAVE) {
                set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
                set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
        }

        if (id->driver_info & BTUSB_INTEL_BOOT) {
                hdev->manufacturer = 2;
                set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
        }

        if (id->driver_info & BTUSB_ATH3012) {
                hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
                set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
                set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
        }

        if (id->driver_info & BTUSB_QCA_ROME) {
                data->setup_on_usb = btusb_setup_qca;
                hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
        }

#ifdef CONFIG_BT_HCIBTUSB_RTL
        if (id->driver_info & BTUSB_REALTEK) {
                hdev->setup = btrtl_setup_realtek;

                /* Realtek devices lose their updated firmware over suspend,
                 * but the USB hub doesn't notice any status change.
                 * Explicitly request a device reset on resume.
                 */
                set_bit(BTUSB_RESET_RESUME, &data->flags);
        }
#endif

        if (id->driver_info & BTUSB_AMP) {
                /* AMP controllers do not support SCO packets */
                data->isoc = NULL;
        } else {
                /* Interface orders are hardcoded in the specification */
                data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
        }

        if (!reset)
                set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);

        if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
                if (!disable_scofix)
                        set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
        }

        if (id->driver_info & BTUSB_BROKEN_ISOC)
                data->isoc = NULL;

        if (id->driver_info & BTUSB_DIGIANSWER) {
                data->cmdreq_type = USB_TYPE_VENDOR;
                set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
        }

        if (id->driver_info & BTUSB_CSR) {
                struct usb_device *udev = data->udev;
                u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);

                /* Old firmware would otherwise execute USB reset */
                if (bcdDevice < 0x117)
                        set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);

                /* Fake CSR devices with broken commands */
                if (bcdDevice <= 0x100 || bcdDevice == 0x134)
                        hdev->setup = btusb_setup_csr;

                set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
        }

        if (id->driver_info & BTUSB_SNIFFER) {
                struct usb_device *udev = data->udev;

                /* New sniffer firmware has crippled HCI interface */
                if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
                        set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
        }

        if (id->driver_info & BTUSB_INTEL_BOOT) {
                /* A bug in the bootloader causes that interrupt interface is
                 * only enabled after receiving SetInterface(0, AltSetting=0).
                 */
                err = usb_set_interface(data->udev, 0, 0);
                if (err < 0) {
                        BT_ERR("failed to set interface 0, alt 0 %d", err);
                        hci_free_dev(hdev);
                        return err;
                }
        }

        if (data->isoc) {
                err = usb_driver_claim_interface(&btusb_driver,
                                                 data->isoc, data);
                if (err < 0) {
                        hci_free_dev(hdev);
                        return err;
                }
        }

#ifdef CONFIG_BT_HCIBTUSB_BCM
        if (data->diag) {
                if (!usb_driver_claim_interface(&btusb_driver,
                                                data->diag, data))
                        __set_diag_interface(hdev);
                else
                        data->diag = NULL;
        }
#endif

        err = hci_register_dev(hdev);
        if (err < 0) {
                hci_free_dev(hdev);
                return err;