/*
 *      Adaptec AAC series RAID controller driver
 *      (c) Copyright 2001 Red Hat Inc.
 *
 * based on the old aacraid driver that is..
 * Adaptec aacraid device driver for Linux.
 *
 * Copyright (c) 2000-2010 Adaptec, Inc.
 *               2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Module Name:
 *  src.c
 *
 * Abstract: Hardware Device Interface for PMC SRC based controllers
 *
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/completion.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <scsi/scsi_host.h>

#include "aacraid.h"

static int aac_src_get_sync_status(struct aac_dev *dev);

static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
{
        struct aac_msix_ctx *ctx;
        struct aac_dev *dev;
        unsigned long bellbits, bellbits_shifted;
        int vector_no;
        int isFastResponse, mode;
        u32 index, handle;

        ctx = (struct aac_msix_ctx *)dev_id;
        dev = ctx->dev;
        vector_no = ctx->vector_no;

        if (dev->msi_enabled) {
                mode = AAC_INT_MODE_MSI;
                if (vector_no == 0) {
                        bellbits = src_readl(dev, MUnit.ODR_MSI);
                        if (bellbits & 0x40000)
                                mode |= AAC_INT_MODE_AIF;
                        if (bellbits & 0x1000)
                                mode |= AAC_INT_MODE_SYNC;
                }
        } else {
                mode = AAC_INT_MODE_INTX;
                bellbits = src_readl(dev, MUnit.ODR_R);
                if (bellbits & PmDoorBellResponseSent) {
                        bellbits = PmDoorBellResponseSent;
                        src_writel(dev, MUnit.ODR_C, bellbits);
                        src_readl(dev, MUnit.ODR_C);
                } else {
                        bellbits_shifted = (bellbits >> SRC_ODR_SHIFT);
                        src_writel(dev, MUnit.ODR_C, bellbits);
                        src_readl(dev, MUnit.ODR_C);

                        if (bellbits_shifted & DoorBellAifPending)
                                mode |= AAC_INT_MODE_AIF;
                        else if (bellbits_shifted & OUTBOUNDDOORBELL_0)
                                mode |= AAC_INT_MODE_SYNC;
                }
        }

        if (mode & AAC_INT_MODE_SYNC) {
                unsigned long sflags;
                struct list_head *entry;
                int send_it = 0;
                extern int aac_sync_mode;

                if (!aac_sync_mode && !dev->msi_enabled) {
                        src_writel(dev, MUnit.ODR_C, bellbits);
                        src_readl(dev, MUnit.ODR_C);
                }

                if (dev->sync_fib) {
                        if (dev->sync_fib->callback)
                                dev->sync_fib->callback(dev->sync_fib->callback_data,
                                        dev->sync_fib);
                        spin_lock_irqsave(&dev->sync_fib->event_lock, sflags);
                        if (dev->sync_fib->flags & FIB_CONTEXT_FLAG_WAIT) {
                                dev->management_fib_count--;
                                up(&dev->sync_fib->event_wait);
                        }
                        spin_unlock_irqrestore(&dev->sync_fib->event_lock,
                                                sflags);
                        spin_lock_irqsave(&dev->sync_lock, sflags);
                        if (!list_empty(&dev->sync_fib_list)) {
                                entry = dev->sync_fib_list.next;
                                dev->sync_fib = list_entry(entry,
                                                           struct fib,
                                                           fiblink);
                                list_del(entry);
                                send_it = 1;
                        } else {
                                dev->sync_fib = NULL;
                        }
                        spin_unlock_irqrestore(&dev->sync_lock, sflags);
                        if (send_it) {
                                aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB,
                                        (u32)dev->sync_fib->hw_fib_pa,
                                        0, 0, 0, 0, 0,
                                        NULL, NULL, NULL, NULL, NULL);
                        }
                }
                if (!dev->msi_enabled)
                        mode = 0;

        }

        if (mode & AAC_INT_MODE_AIF) {
                /* handle AIF */
                aac_intr_normal(dev, 0, 2, 0, NULL);
                if (dev->msi_enabled)
                        aac_src_access_devreg(dev, AAC_CLEAR_AIF_BIT);
                mode = 0;
        }

        if (mode) {
                index = dev->host_rrq_idx[vector_no];

                for (;;) {
                        isFastResponse = 0;
                        /* remove toggle bit (31) */
                        handle = (dev->host_rrq[index] & 0x7fffffff);
                        /* check fast response bit (30) */
                        if (handle & 0x40000000)
                                isFastResponse = 1;
                        handle &= 0x0000ffff;
                        if (handle == 0)
                                break;
                        if (dev->msi_enabled && dev->max_msix > 1)
                                atomic_dec(&dev->rrq_outstanding[vector_no]);
                        aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
                        dev->host_rrq[index++] = 0;
                        if (index == (vector_no + 1) * dev->vector_cap)
                                index = vector_no * dev->vector_cap;
                        dev->host_rrq_idx[vector_no] = index;
                }
                mode = 0;
        }

        return IRQ_HANDLED;
}

/**
 *      aac_src_disable_interrupt       -       Disable interrupts
 *      @dev: Adapter
 */

static void aac_src_disable_interrupt(struct aac_dev *dev)
{
        src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
}

/**
 *      aac_src_enable_interrupt_message        -       Enable interrupts
 *      @dev: Adapter
 */

static void aac_src_enable_interrupt_message(struct aac_dev *dev)
{
        aac_src_access_devreg(dev, AAC_ENABLE_INTERRUPT);
}

/**
 *      src_sync_cmd    -       send a command and wait
 *      @dev: Adapter
 *      @command: Command to execute
 *      @p1: first parameter
 *      @ret: adapter status
 *
 *      This routine will send a synchronous command to the adapter and wait
 *      for its completion.
 */

static int src_sync_cmd(struct aac_dev *dev, u32 command,
        u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
        u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
{
        unsigned long start;
        unsigned long delay;
        int ok;

        /*
         *      Write the command into Mailbox 0
         */
        writel(command, &dev->IndexRegs->Mailbox[0]);
        /*
         *      Write the parameters into Mailboxes 1 - 6
         */
        writel(p1, &dev->IndexRegs->Mailbox[1]);
        writel(p2, &dev->IndexRegs->Mailbox[2]);
        writel(p3, &dev->IndexRegs->Mailbox[3]);
        writel(p4, &dev->IndexRegs->Mailbox[4]);

        /*
         *      Clear the synch command doorbell to start on a clean slate.
         */
        if (!dev->msi_enabled)
                src_writel(dev,
                           MUnit.ODR_C,
                           OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);

        /*
         *      Disable doorbell interrupts
         */
        src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);

        /*
         *      Force the completion of the mask register write before issuing
         *      the interrupt.
         */
        src_readl(dev, MUnit.OIMR);

        /*
         *      Signal that there is a new synch command
         */
        src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);

        if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) {
                ok = 0;
                start = jiffies;

                if (command == IOP_RESET_ALWAYS) {
                        /* Wait up to 10 sec */
                        delay = 10*HZ;
                } else {
                        /* Wait up to 5 minutes */
                        delay = 300*HZ;
                }
                while (time_before(jiffies, start+delay)) {
                        udelay(5);      /* Delay 5 microseconds to let Mon960 get info. */
                        /*
                         *      Mon960 will set doorbell0 bit when it has completed the command.
                         */
                        if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) {
                                /*
                                 *      Clear the doorbell.
                                 */
                                if (dev->msi_enabled)
                                        aac_src_access_devreg(dev,
                                                AAC_CLEAR_SYNC_BIT);
                                else
                                        src_writel(dev,
                                                MUnit.ODR_C,
                                                OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
                                ok = 1;
                                break;
                        }
                        /*
                         *      Yield the processor in case we are slow
                         */
                        msleep(1);
                }
                if (unlikely(ok != 1)) {
                        /*
                         *      Restore interrupt mask even though we timed out
                         */
                        aac_adapter_enable_int(dev);
                        return -ETIMEDOUT;
                }
                /*
                 *      Pull the synch status from Mailbox 0.
                 */
                if (status)
                        *status = readl(&dev->IndexRegs->Mailbox[0]);
                if (r1)
                        *r1 = readl(&dev->IndexRegs->Mailbox[1]);
                if (r2)
                        *r2 = readl(&dev->IndexRegs->Mailbox[2]);
                if (r3)
                        *r3 = readl(&dev->IndexRegs->Mailbox[3]);
                if (r4)
                        *r4 = readl(&dev->IndexRegs->Mailbox[4]);
                if (command == GET_COMM_PREFERRED_SETTINGS)
                        dev->max_msix =
                                readl(&dev->IndexRegs->Mailbox[5]) & 0xFFFF;
                /*
                 *      Clear the synch command doorbell.
                 */
                if (!dev->msi_enabled)
                        src_writel(dev,
                                MUnit.ODR_C,
                                OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
        }

        /*
         *      Restore interrupt mask
         */
        aac_adapter_enable_int(dev);
        return 0;
}

/**
 *      aac_src_interrupt_adapter       -       interrupt adapter
 *      @dev: Adapter
 *
 *      Send an interrupt to the i960 and breakpoint it.
 */

static void aac_src_interrupt_adapter(struct aac_dev *dev)
{
        src_sync_cmd(dev, BREAKPOINT_REQUEST,
                0, 0, 0, 0, 0, 0,
                NULL, NULL, NULL, NULL, NULL);
}

/**
 *      aac_src_notify_adapter          -       send an event to the adapter
 *      @dev: Adapter
 *      @event: Event to send
 *
 *      Notify the i960 that something it probably cares about has
 *      happened.
 */

static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
{
        switch (event) {

        case AdapNormCmdQue:
                src_writel(dev, MUnit.ODR_C,
                        INBOUNDDOORBELL_1 << SRC_ODR_SHIFT);
                break;
        case HostNormRespNotFull:
                src_writel(dev, MUnit.ODR_C,
                        INBOUNDDOORBELL_4 << SRC_ODR_SHIFT);
                break;
        case AdapNormRespQue:
                src_writel(dev, MUnit.ODR_C,
                        INBOUNDDOORBELL_2 << SRC_ODR_SHIFT);
                break;
        case HostNormCmdNotFull:
                src_writel(dev, MUnit.ODR_C,
                        INBOUNDDOORBELL_3 << SRC_ODR_SHIFT);
                break;
        case FastIo:
                src_writel(dev, MUnit.ODR_C,
                        INBOUNDDOORBELL_6 << SRC_ODR_SHIFT);
                break;
        case AdapPrintfDone:
                src_writel(dev, MUnit.ODR_C,
                        INBOUNDDOORBELL_5 << SRC_ODR_SHIFT);
                break;
        default:
                BUG();
                break;
        }
}

/**
 *      aac_src_start_adapter           -       activate adapter
 *      @dev:   Adapter
 *
 *      Start up processing on an i960 based AAC adapter
 */

static void aac_src_start_adapter(struct aac_dev *dev)
{
        struct aac_init *init;
        int i;

         /* reset host_rrq_idx first */
        for (i = 0; i < dev->max_msix; i++) {
                dev->host_rrq_idx[i] = i * dev->vector_cap;
                atomic_set(&dev->rrq_outstanding[i], 0);
        }
        dev->fibs_pushed_no = 0;

        init = dev->init;
        init->HostElapsedSeconds = cpu_to_le32(get_seconds());

        /* We can only use a 32 bit address here */
        src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
          0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}

/**
 *      aac_src_check_health
 *      @dev: device to check if healthy
 *
 *      Will attempt to determine if the specified adapter is alive and
 *      capable of handling requests, returning 0 if alive.
 */
static int aac_src_check_health(struct aac_dev *dev)
{
        u32 status = src_readl(dev, MUnit.OMR);

        /*
         *      Check to see if the board failed any self tests.
         */
        if (unlikely(status & SELF_TEST_FAILED))
                return -1;

        /*
         *      Check to see if the board panic'd.
         */
        if (unlikely(status & KERNEL_PANIC))
                return (status >> 16) & 0xFF;
        /*
         *      Wait for the adapter to be up and running.
         */
        if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
                return -3;
        /*
         *      Everything is OK
         */
        return 0;
}

/**
 *      aac_src_deliver_message
 *      @fib: fib to issue
 *
 *      Will send a fib, returning 0 if successful.
 */
static int aac_src_deliver_message(struct fib *fib)
{
        struct aac_dev *dev = fib->dev;
        struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
        u32 fibsize;
        dma_addr_t address;
        struct aac_fib_xporthdr *pFibX;
#if !defined(writeq)
        unsigned long flags;
#endif

        u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);

        atomic_inc(&q->numpending);

        if (dev->msi_enabled && fib->hw_fib_va->header.Command != AifRequest &&
            dev->max_msix > 1) {
                u_int16_t vector_no, first_choice = 0xffff;

                vector_no = dev->fibs_pushed_no % dev->max_msix;
                do {
                        vector_no += 1;
                        if (vector_no == dev->max_msix)
                                vector_no = 1;
                        if (atomic_read(&dev->rrq_outstanding[vector_no]) <
                            dev->vector_cap)
                                break;
                        if (0xffff == first_choice)
                                first_choice = vector_no;
                        else if (vector_no == first_choice)
                                break;
                } while (1);
                if (vector_no == first_choice)
                        vector_no = 0;
                atomic_inc(&dev->rrq_outstanding[vector_no]);
                if (dev->fibs_pushed_no == 0xffffffff)
                        dev->fibs_pushed_no = 0;
                else
                        dev->fibs_pushed_no++;
                fib->hw_fib_va->header.Handle += (vector_no << 16);
        }

        if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
                /* Calculate the amount to the fibsize bits */
                fibsize = (hdr_size + 127) / 128 - 1;
                if (fibsize > (ALIGN32 - 1))
                        return -EMSGSIZE;
                /* New FIB header, 32-bit */
                address = fib->hw_fib_pa;
                fib->hw_fib_va->header.StructType = FIB_MAGIC2;
                fib->hw_fib_va->header.SenderFibAddress = (u32)address;
                fib->hw_fib_va->header.u.TimeStamp = 0;
                BUG_ON(upper_32_bits(address) != 0L);
                address |= fibsize;
        } else {
                /* Calculate the amount to the fibsize bits */
                fibsize = (sizeof(struct aac_fib_xporthdr) + hdr_size + 127) / 128 - 1;
                if (fibsize > (ALIGN32 - 1))
                        return -EMSGSIZE;

                /* Fill XPORT header */
                pFibX = (void *)fib->hw_fib_va - sizeof(struct aac_fib_xporthdr);
                pFibX->Handle = cpu_to_le32(fib->hw_fib_va->header.Handle);
                pFibX->HostAddress = cpu_to_le64(fib->hw_fib_pa);
                pFibX->Size = cpu_to_le32(hdr_size);

                /*
                 * The xport header has been 32-byte aligned for us so that fibsize
                 * can be masked out of this address by hardware. -- BenC
                 */
                address = fib->hw_fib_pa - sizeof(struct aac_fib_xporthdr);
                if (address & (ALIGN32 - 1))
                        return -EINVAL;
                address |= fibsize;
        }
#if defined(writeq)
        src_writeq(dev, MUnit.IQ_L, (u64)address);
#else
        spin_lock_irqsave(&fib->dev->iq_lock, flags);
        src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
        src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
        spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
#endif
        return 0;
}

/**
 *      aac_src_ioremap
 *      @size: mapping resize request
 *
 */
static int aac_src_ioremap(struct aac_dev *dev, u32 size)
{
        if (!size) {
                iounmap(dev->regs.src.bar1);
                dev->regs.src.bar1 = NULL;
                iounmap(dev->regs.src.bar0);
                dev->base = dev->regs.src.bar0 = NULL;
                return 0;
        }
        dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2),
                AAC_MIN_SRC_BAR1_SIZE);
        dev->base = NULL;
        if (dev->regs.src.bar1 == NULL)
                return -1;
        dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
        if (dev->base == NULL) {
                iounmap(dev->regs.src.bar1);
                dev->regs.src.bar1 = NULL;
                return -1;
        }
        dev->IndexRegs = &((struct src_registers __iomem *)
                dev->base)->u.tupelo.IndexRegs;
        return 0;
}

/**
 *  aac_srcv_ioremap
 *      @size: mapping resize request
 *
 */
static int aac_srcv_ioremap(struct aac_dev *dev, u32 size)
{
        if (!size) {
                iounmap(dev->regs.src.bar0);
                dev->base = dev->regs.src.bar0 = NULL;
                return 0;
        }
        dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
        if (dev->base == NULL)
                return -1;
        dev->IndexRegs = &((struct src_registers __iomem *)
                dev->base)->u.denali.IndexRegs;
        return 0;
}

static int aac_src_restart_adapter(struct aac_dev *dev, int bled)
{
        u32 var, reset_mask;

        if (bled >= 0) {
                if (bled)
                        printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
                                dev->name, dev->id, bled);
                dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
                bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
                        0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL);
                if ((bled || (var != 0x00000001)) &&
                    !dev->doorbell_mask)
                        return -EINVAL;
                else if (dev->doorbell_mask) {
                        reset_mask = dev->doorbell_mask;
                        bled = 0;
                        var = 0x00000001;
                }

                if ((dev->pdev->device == PMC_DEVICE_S7 ||
                    dev->pdev->device == PMC_DEVICE_S8 ||
                    dev->pdev->device == PMC_DEVICE_S9) && dev->msi_enabled) {
                        aac_src_access_devreg(dev, AAC_ENABLE_INTX);
                        dev->msi_enabled = 0;
                        msleep(5000); /* Delay 5 seconds */
                }

                if (!bled && (dev->supplement_adapter_info.SupportedOptions2 &
                    AAC_OPTION_DOORBELL_RESET)) {
                        src_writel(dev, MUnit.IDR, reset_mask);
                        ssleep(45);
                } else {
                        src_writel(dev, MUnit.IDR, 0x100);
                        ssleep(45);
                }
        }

        if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
                return -ENODEV;

        if (startup_timeout < 300)
                startup_timeout = 300;

        return 0;
}

/**
 *      aac_src_select_comm     -       Select communications method
 *      @dev: Adapter
 *      @comm: communications method
 */
int aac_src_select_comm(struct aac_dev *dev, int comm)
{
        switch (comm) {
        case AAC_COMM_MESSAGE:
                dev->a_ops.adapter_intr = aac_src_intr_message;
                dev->a_ops.adapter_deliver = aac_src_deliver_message;
                break;
        default:
                return 1;
        }
        return 0;
}

/**
 *  aac_src_init        -       initialize an Cardinal Frey Bar card
 *  @dev: device to configure
 *
 */

int aac_src_init(struct aac_dev *dev)
{
        unsigned long start;
        unsigned long status;
        int restart = 0;
        int instance = dev->id;
        const char *name = dev->name;

        dev->a_ops.adapter_ioremap = aac_src_ioremap;
        dev->a_ops.adapter_comm = aac_src_select_comm;

        dev->base_size = AAC_MIN_SRC_BAR0_SIZE;
        if (aac_adapter_ioremap(dev, dev->base_size)) {
                printk(KERN_WARNING "%s: unable to map adapter.\n", name);
                goto error_iounmap;
        }

        /* Failure to reset here is an option ... */
        dev->a_ops.adapter_sync_cmd = src_sync_cmd;
        dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
        if ((aac_reset_devices || reset_devices) &&
                !aac_src_restart_adapter(dev, 0))
                ++restart;
        /*
         *      Check to see if the board panic'd while booting.
         */
        status = src_readl(dev, MUnit.OMR);
        if (status & KERNEL_PANIC) {
                if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
                        goto error_iounmap;
                ++restart;
        }
        /*
         *      Check to see if the board failed any self tests.
         */
        status = src_readl(dev, MUnit.OMR);
        if (status & SELF_TEST_FAILED) {
                printk(KERN_ERR "%s%d: adapter self-test failed.\n",
                        dev->name, instance);
                goto error_iounmap;
        }
        /*
         *      Check to see if the monitor panic'd while booting.
         */
        if (status & MONITOR_PANIC) {
                printk(KERN_ERR "%s%d: adapter monitor panic.\n",
                        dev->name, instance);
                goto error_iounmap;
        }
        start = jiffies;
        /*
         *      Wait for the adapter to be up and running. Wait up to 3 minutes
         */
        while (!((status = src_readl(dev, MUnit.OMR)) &
                KERNEL_UP_AND_RUNNING)) {
                if ((restart &&
                  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
                  time_after(jiffies, start+HZ*startup_timeout)) {
                        printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
                                        dev->name, instance, status);
                        goto error_iounmap;
                }
                if (!restart &&
                  ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
                  time_after(jiffies, start + HZ *
                  ((startup_timeout > 60)
                    ? (startup_timeout - 60)
                    : (startup_timeout / 2))))) {
                        if (likely(!aac_src_restart_adapter(dev,
                            aac_src_check_health(dev))))
                                start = jiffies;
                        ++restart;
                }
                msleep(1);
        }
        if (restart && aac_commit)
                aac_commit = 1;
        /*
         *      Fill in the common function dispatch table.
         */
        dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
        dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
        dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
        dev->a_ops.adapter_notify = aac_src_notify_adapter;
        dev->a_ops.adapter_sync_cmd = src_sync_cmd;
        dev->a_ops.adapter_check_health = aac_src_check_health;
        dev->a_ops.adapter_restart = aac_src_restart_adapter;
        dev->a_ops.adapter_start = aac_src_start_adapter;

        /*
         *      First clear out all interrupts.  Then enable the one's that we
         *      can handle.
         */
        aac_adapter_comm(dev, AAC_COMM_MESSAGE);
        aac_adapter_disable_int(dev);
        src_writel(dev, MUnit.ODR_C, 0xffffffff);
        aac_adapter_enable_int(dev);

        if (aac_init_adapter(dev) == NULL)
                goto error_iounmap;
        if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
                goto error_iounmap;

        dev->msi = !pci_enable_msi(dev->pdev);

        dev->aac_msix[0].vector_no = 0;
        dev->aac_msix[0].dev = dev;

        if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
                        IRQF_SHARED, "aacraid", &(dev->aac_msix[0]))  < 0) {

                if (dev->msi)
                        pci_disable_msi(dev->pdev);

                printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
                        name, instance);
                goto error_iounmap;
        }
        dev->dbg_base = pci_resource_start(dev->pdev, 2);
        dev->dbg_base_mapped = dev->regs.src.bar1;
        dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE;
        dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;

        aac_adapter_enable_int(dev);

        if (!dev->sync_mode) {
                /*
                 * Tell the adapter that all is configured, and it can
                 * start accepting requests
                 */
                aac_src_start_adapter(dev);
        }
        return 0;

error_iounmap:

        return -1;
}

/**
 *  aac_srcv_init       -       initialize an SRCv card
 *  @dev: device to configure
 *
 */

int aac_srcv_init(struct aac_dev *dev)
{
        unsigned long start;
        unsigned long status;
        int restart = 0;
        int instance = dev->id;
        const char *name = dev->name;

        dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
        dev->a_ops.adapter_comm = aac_src_select_comm;

        dev->base_size = AAC_MIN_SRCV_BAR0_SIZE;
        if (aac_adapter_ioremap(dev, dev->base_size)) {
                printk(KERN_WARNING "%s: unable to map adapter.\n", name);
                goto error_iounmap;
        }

        /* Failure to reset here is an option ... */
        dev->a_ops.adapter_sync_cmd = src_sync_cmd;
        dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
        if ((aac_reset_devices || reset_devices) &&
                !aac_src_restart_adapter(dev, 0))
                ++restart;
        /*
         *      Check to see if flash update is running.
         *      Wait for the adapter to be up and running. Wait up to 5 minutes
         */
        status = src_readl(dev, MUnit.OMR);
        if (status & FLASH_UPD_PENDING) {
                start = jiffies;
                do {
                        status = src_readl(dev, MUnit.OMR);
                        if (time_after(jiffies, start+HZ*FWUPD_TIMEOUT)) {
                                printk(KERN_ERR "%s%d: adapter flash update failed.\n",
                                        dev->name, instance);
                                goto error_iounmap;
                        }
                } while (!(status & FLASH_UPD_SUCCESS) &&
                         !(status & FLASH_UPD_FAILED));
                /* Delay 10 seconds.
                 * Because right now FW is doing a soft reset,
                 * do not read scratch pad register at this time
                 */
                ssleep(10);
        }
        /*
         *      Check to see if the board panic'd while booting.
         */
        status = src_readl(dev, MUnit.OMR);
        if (status & KERNEL_PANIC) {
                if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
                        goto error_iounmap;
                ++restart;
        }
        /*
         *      Check to see if the board failed any self tests.
         */
        status = src_readl(dev, MUnit.OMR);
        if (status & SELF_TEST_FAILED) {
                printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
                goto error_iounmap;
        }
        /*
         *      Check to see if the monitor panic'd while booting.
         */
        if (status & MONITOR_PANIC) {
                printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
                goto error_iounmap;
        }
        start = jiffies;
        /*
         *      Wait for the adapter to be up and running. Wait up to 3 minutes
         */
        while (!((status = src_readl(dev, MUnit.OMR)) &
                KERNEL_UP_AND_RUNNING) ||
                status == 0xffffffff) {
                if ((restart &&
                  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
                  time_after(jiffies, start+HZ*startup_timeout)) {
                        printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
                                        dev->name, instance, status);
                        goto error_iounmap;
                }
                if (!restart &&
                  ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
                  time_after(jiffies, start + HZ *
                  ((startup_timeout > 60)
                    ? (startup_timeout - 60)
                    : (startup_timeout / 2))))) {
                        if (likely(!aac_src_restart_adapter(dev, aac_src_check_health(dev))))
                                start = jiffies;
                        ++restart;
                }
                msleep(1);
        }
        if (restart && aac_commit)
                aac_commit = 1;
        /*
         *      Fill in the common function dispatch table.
         */
        dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
        dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
        dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
        dev->a_ops.adapter_notify = aac_src_notify_adapter;
        dev->a_ops.adapter_sync_cmd = src_sync_cmd;
        dev->a_ops.adapter_check_health = aac_src_check_health;
        dev->a_ops.adapter_restart = aac_src_restart_adapter;
        dev->a_ops.adapter_start = aac_src_start_adapter;

        /*
         *      First clear out all interrupts.  Then enable the one's that we
         *      can handle.
         */
        aac_adapter_comm(dev, AAC_COMM_MESSAGE);
        aac_adapter_disable_int(dev);
        src_writel(dev, MUnit.ODR_C, 0xffffffff);
        aac_adapter_enable_int(dev);

        if (aac_init_adapter(dev) == NULL)
                goto error_iounmap;
        if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE2)
                goto error_iounmap;
        if (dev->msi_enabled)
                aac_src_access_devreg(dev, AAC_ENABLE_MSIX);

        if (aac_acquire_irq(dev))
                goto error_iounmap;

        dev->dbg_base = dev->base_start;
        dev->dbg_base_mapped = dev->base;
        dev->dbg_size = dev->base_size;
        dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;

        aac_adapter_enable_int(dev);

        if (!dev->sync_mode) {
                /*
                 * Tell the adapter that all is configured, and it can
                 * start accepting requests
                 */
                aac_src_start_adapter(dev);
        }
        return 0;

error_iounmap:

        return -1;
}

void aac_src_access_devreg(struct aac_dev *dev, int mode)
{
        u_int32_t val;

        switch (mode) {
        case AAC_ENABLE_INTERRUPT:
                src_writel(dev,
                           MUnit.OIMR,
                           dev->OIMR = (dev->msi_enabled ?
                                        AAC_INT_ENABLE_TYPE1_MSIX :
                                        AAC_INT_ENABLE_TYPE1_INTX));
                break;

        case AAC_DISABLE_INTERRUPT:
                src_writel(dev,
                           MUnit.OIMR,
                           dev->OIMR = AAC_INT_DISABLE_ALL);
                break;

        case AAC_ENABLE_MSIX:
                /* set bit 6 */
                val = src_readl(dev, MUnit.IDR);
                val |= 0x40;
                src_writel(dev,  MUnit.IDR, val);
                src_readl(dev, MUnit.IDR);
                /* unmask int. */
                val = PMC_ALL_INTERRUPT_BITS;
                src_writel(dev, MUnit.IOAR, val);
                val = src_readl(dev, MUnit.OIMR);
                src_writel(dev,
                           MUnit.OIMR,
                           val & (~(PMC_GLOBAL_INT_BIT2 | PMC_GLOBAL_INT_BIT0)));
                break;

        case AAC_DISABLE_MSIX:
                /* reset bit 6 */
                val = src_readl(dev, MUnit.IDR);
                val &= ~0x40;
                src_writel(dev, MUnit.IDR, val);
                src_readl(dev, MUnit.IDR);
                break;

        case AAC_CLEAR_AIF_BIT:
                /* set bit 5 */
                val = src_readl(dev, MUnit.IDR);
                val |= 0x20;
                src_writel(dev, MUnit.IDR, val);
                src_readl(dev, MUnit.IDR);
                break;

        case AAC_CLEAR_SYNC_BIT:
                /* set bit 4 */
                val = src_readl(dev, MUnit.IDR);
                val |= 0x10;
                src_writel(dev, MUnit.IDR, val);
                src_readl(dev, MUnit.IDR);
                break;

        case AAC_ENABLE_INTX:
                /* set bit 7 */
                val = src_readl(dev, MUnit.IDR);
                val |= 0x80;
                src_writel(dev, MUnit.IDR, val);
                src_readl(dev, MUnit.IDR);
                /* unmask int. */
                val = PMC_ALL_INTERRUPT_BITS;
                src_writel(dev, MUnit.IOAR, val);
                src_readl(dev, MUnit.IOAR);
                val = src_readl(dev, MUnit.OIMR);
                src_writel(dev, MUnit.OIMR,
                                val & (~(PMC_GLOBAL_INT_BIT2)));
                break;

        default:
                break;
        }
}

static int aac_src_get_sync_status(struct aac_dev *dev)
{

        int val;

        if (dev->msi_enabled)
                val = src_readl(dev, MUnit.ODR_MSI) & 0x1000 ? 1 : 0;
        else
                val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;

        return val;
}