1#define SUSBCRequest_SetBaudRateParityAndStopBits 1 2#define SUSBCR_SBR_MASK 0xFF00 3#define SUSBCR_SBR_1200 0x0100 4#define SUSBCR_SBR_9600 0x0200 5#define SUSBCR_SBR_19200 0x0400 6#define SUSBCR_SBR_28800 0x0800 7#define SUSBCR_SBR_38400 0x1000 8#define SUSBCR_SBR_57600 0x2000 9#define SUSBCR_SBR_115200 0x4000 10 11#define SUSBCR_SPASB_MASK 0x0070 12#define SUSBCR_SPASB_NoParity 0x0010 13#define SUSBCR_SPASB_OddParity 0x0020 14#define SUSBCR_SPASB_EvenParity 0x0040 15 16#define SUSBCR_SPASB_STPMASK 0x0003 17#define SUSBCR_SPASB_1StopBit 0x0001 18#define SUSBCR_SPASB_2StopBits 0x0002 19 20#define SUSBCRequest_SetStatusLinesOrQueues 2 21#define SUSBCR_SSL_SETRTS 0x0001 22#define SUSBCR_SSL_CLRRTS 0x0002 23#define SUSBCR_SSL_SETDTR 0x0004 24#define SUSBCR_SSL_CLRDTR 0x0010 25 26/* Kill the pending/current writes to the comm port. */ 27#define SUSBCR_SSL_PURGE_TXABORT 0x0100 28/* Kill the pending/current reads to the comm port. */ 29#define SUSBCR_SSL_PURGE_RXABORT 0x0200 30/* Kill the transmit queue if there. */ 31#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 32/* Kill the typeahead buffer if there. */ 33#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 34 35#define SUSBCRequest_GetStatusLineState 4 36/* Any Character received */ 37#define SUSBCR_GSL_RXCHAR 0x0001 38/* Transmitt Queue Empty */ 39#define SUSBCR_GSL_TXEMPTY 0x0004 40/* CTS changed state */ 41#define SUSBCR_GSL_CTS 0x0008 42/* DSR changed state */ 43#define SUSBCR_GSL_DSR 0x0010 44/* RLSD changed state */ 45#define SUSBCR_GSL_RLSD 0x0020 46/* BREAK received */ 47#define SUSBCR_GSL_BREAK 0x0040 48/* Line status error occurred */ 49#define SUSBCR_GSL_ERR 0x0080 50/* Ring signal detected */ 51#define SUSBCR_GSL_RING 0x0100 52 53#define SUSBCRequest_Misc 8 54/* use a predefined reset sequence */ 55#define SUSBCR_MSC_ResetReader 0x0001 56/* use a predefined sequence to reset the internal queues */ 57#define SUSBCR_MSC_ResetAllQueues 0x0002 58 59#define SUSBCRequest_GetMisc 0x10 60 61/* 62 * get the firmware version from device, coded like this 0xHHLLBBPP with 63 * HH = Firmware Version High Byte 64 * LL = Firmware Version Low Byte 65 * BB = Build Number 66 * PP = Further Attributes 67 */ 68#define SUSBCR_MSC_GetFWVersion 0x0001 69 70/* 71 * get the hardware version from device coded like this 0xHHLLPPRR with 72 * HH = Software Version High Byte 73 * LL = Software Version Low Byte 74 * PP = Further Attributes 75 * RR = Reserved for the hardware ID 76 */ 77#define SUSBCR_MSC_GetHWVersion 0x0002 78