/*
 * Driver for TI Dual PLL CDCE925 clock synthesizer
 *
 * This driver always connects the Y1 to the input clock, Y2/Y3 to PLL1
 * and Y4/Y5 to PLL2. PLL frequency is set on a first-come-first-serve
 * basis. Clients can directly request any frequency that the chip can
 * deliver using the standard clk framework. In addition, the device can
 * be configured and activated via the devicetree.
 *
 * Copyright (C) 2014, Topic Embedded Products
 * Licenced under GPL
 */
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/gcd.h>

/* The chip has 2 PLLs which can be routed through dividers to 5 outputs.
 * Model this as 2 PLL clocks which are parents to the outputs.
 */
#define NUMBER_OF_PLLS  2
#define NUMBER_OF_OUTPUTS       5

#define CDCE925_REG_GLOBAL1     0x01
#define CDCE925_REG_Y1SPIPDIVH  0x02
#define CDCE925_REG_PDIVL       0x03
#define CDCE925_REG_XCSEL       0x05
/* PLL parameters start at 0x10, steps of 0x10 */
#define CDCE925_OFFSET_PLL      0x10
/* Add CDCE925_OFFSET_PLL * (pll) to these registers before sending */
#define CDCE925_PLL_MUX_OUTPUTS 0x14
#define CDCE925_PLL_MULDIV      0x18

#define CDCE925_PLL_FREQUENCY_MIN        80000000ul
#define CDCE925_PLL_FREQUENCY_MAX       230000000ul
struct clk_cdce925_chip;

struct clk_cdce925_output {
        struct clk_hw hw;
        struct clk_cdce925_chip *chip;
        u8 index;
        u16 pdiv; /* 1..127 for Y2-Y5; 1..1023 for Y1 */
};
#define to_clk_cdce925_output(_hw) \
        container_of(_hw, struct clk_cdce925_output, hw)

struct clk_cdce925_pll {
        struct clk_hw hw;
        struct clk_cdce925_chip *chip;
        u8 index;
        u16 m;   /* 1..511 */
        u16 n;   /* 1..4095 */
};
#define to_clk_cdce925_pll(_hw) container_of(_hw, struct clk_cdce925_pll, hw)

struct clk_cdce925_chip {
        struct regmap *regmap;
        struct i2c_client *i2c_client;
        struct clk_cdce925_pll pll[NUMBER_OF_PLLS];
        struct clk_cdce925_output clk[NUMBER_OF_OUTPUTS];
        struct clk *dt_clk[NUMBER_OF_OUTPUTS];
        struct clk_onecell_data onecell;
};

/* ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** */

static unsigned long cdce925_pll_calculate_rate(unsigned long parent_rate,
        u16 n, u16 m)
{
        if ((!m || !n) || (m == n))
                return parent_rate; /* In bypass mode runs at same frequency */
        return mult_frac(parent_rate, (unsigned long)n, (unsigned long)m);
}

static unsigned long cdce925_pll_recalc_rate(struct clk_hw *hw,
                unsigned long parent_rate)
{
        /* Output frequency of PLL is Fout = (Fin/Pdiv)*(N/M) */
        struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);

        return cdce925_pll_calculate_rate(parent_rate, data->n, data->m);
}

static void cdce925_pll_find_rate(unsigned long rate,
                unsigned long parent_rate, u16 *n, u16 *m)
{
        unsigned long un;
        unsigned long um;
        unsigned long g;

        if (rate <= parent_rate) {
                /* Can always deliver parent_rate in bypass mode */
                rate = parent_rate;
                *n = 0;
                *m = 0;
        } else {
                /* In PLL mode, need to apply min/max range */
                if (rate < CDCE925_PLL_FREQUENCY_MIN)
                        rate = CDCE925_PLL_FREQUENCY_MIN;
                else if (rate > CDCE925_PLL_FREQUENCY_MAX)
                        rate = CDCE925_PLL_FREQUENCY_MAX;

                g = gcd(rate, parent_rate);
                um = parent_rate / g;
                un = rate / g;
                /* When outside hw range, reduce to fit (rounding errors) */
                while ((un > 4095) || (um > 511)) {
                        un >>= 1;
                        um >>= 1;
                }
                if (un == 0)
                        un = 1;
                if (um == 0)
                        um = 1;

                *n = un;
                *m = um;
        }
}

static long cdce925_pll_round_rate(struct clk_hw *hw, unsigned long rate,
                unsigned long *parent_rate)
{
        u16 n, m;

        cdce925_pll_find_rate(rate, *parent_rate, &n, &m);
        return (long)cdce925_pll_calculate_rate(*parent_rate, n, m);
}

static int cdce925_pll_set_rate(struct clk_hw *hw, unsigned long rate,
                unsigned long parent_rate)
{
        struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);

        if (!rate || (rate == parent_rate)) {
                data->m = 0; /* Bypass mode */
                data->n = 0;
                return 0;
        }

        if ((rate < CDCE925_PLL_FREQUENCY_MIN) ||
                (rate > CDCE925_PLL_FREQUENCY_MAX)) {
                pr_debug("%s: rate %lu outside PLL range.\n", __func__, rate);
                return -EINVAL;
        }

        if (rate < parent_rate) {
                pr_debug("%s: rate %lu less than parent rate %lu.\n", __func__,
                        rate, parent_rate);
                return -EINVAL;
        }

        cdce925_pll_find_rate(rate, parent_rate, &data->n, &data->m);
        return 0;
}


/* calculate p = max(0, 4 - int(log2 (n/m))) */
static u8 cdce925_pll_calc_p(u16 n, u16 m)
{
        u8 p;
        u16 r = n / m;

        if (r >= 16)
                return 0;
        p = 4;
        while (r > 1) {
                r >>= 1;
                --p;
        }
        return p;
}

/* Returns VCO range bits for VCO1_0_RANGE */
static u8 cdce925_pll_calc_range_bits(struct clk_hw *hw, u16 n, u16 m)
{
        struct clk *parent = clk_get_parent(hw->clk);
        unsigned long rate = clk_get_rate(parent);

        rate = mult_frac(rate, (unsigned long)n, (unsigned long)m);
        if (rate >= 175000000)
                return 0x3;
        if (rate >= 150000000)
                return 0x02;
        if (rate >= 125000000)
                return 0x01;
        return 0x00;
}

/* I2C clock, hence everything must happen in (un)prepare because this
 * may sleep */
static int cdce925_pll_prepare(struct clk_hw *hw)
{
        struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
        u16 n = data->n;
        u16 m = data->m;
        u16 r;
        u8 q;
        u8 p;
        u16 nn;
        u8 pll[4]; /* Bits are spread out over 4 byte registers */
        u8 reg_ofs = data->index * CDCE925_OFFSET_PLL;
        unsigned i;

        if ((!m || !n) || (m == n)) {
                /* Set PLL mux to bypass mode, leave the rest as is */
                regmap_update_bits(data->chip->regmap,
                        reg_ofs + CDCE925_PLL_MUX_OUTPUTS, 0x80, 0x80);
        } else {
                /* According to data sheet: */
                /* p = max(0, 4 - int(log2 (n/m))) */
                p = cdce925_pll_calc_p(n, m);
                /* nn = n * 2^p */
                nn = n * BIT(p);
                /* q = int(nn/m) */
                q = nn / m;
                if ((q < 16) || (1 > 64)) {
                        pr_debug("%s invalid q=%d\n", __func__, q);
                        return -EINVAL;
                }
                r = nn - (m*q);
                if (r > 511) {
                        pr_debug("%s invalid r=%d\n", __func__, r);
                        return -EINVAL;
                }
                pr_debug("%s n=%d m=%d p=%d q=%d r=%d\n", __func__,
                        n, m, p, q, r);
                /* encode into register bits */
                pll[0] = n >> 4;
                pll[1] = ((n & 0x0F) << 4) | ((r >> 5) & 0x0F);
                pll[2] = ((r & 0x1F) << 3) | ((q >> 3) & 0x07);
                pll[3] = ((q & 0x07) << 5) | (p << 2) |
                                cdce925_pll_calc_range_bits(hw, n, m);
                /* Write to registers */
                for (i = 0; i < ARRAY_SIZE(pll); ++i)
                        regmap_write(data->chip->regmap,
                                reg_ofs + CDCE925_PLL_MULDIV + i, pll[i]);
                /* Enable PLL */
                regmap_update_bits(data->chip->regmap,
                        reg_ofs + CDCE925_PLL_MUX_OUTPUTS, 0x80, 0x00);
        }

        return 0;
}

static void cdce925_pll_unprepare(struct clk_hw *hw)
{
        struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
        u8 reg_ofs = data->index * CDCE925_OFFSET_PLL;

        regmap_update_bits(data->chip->regmap,
                        reg_ofs + CDCE925_PLL_MUX_OUTPUTS, 0x80, 0x80);
}

static const struct clk_ops cdce925_pll_ops = {
        .prepare = cdce925_pll_prepare,
        .unprepare = cdce925_pll_unprepare,
        .recalc_rate = cdce925_pll_recalc_rate,
        .round_rate = cdce925_pll_round_rate,
        .set_rate = cdce925_pll_set_rate,
};


static void cdce925_clk_set_pdiv(struct clk_cdce925_output *data, u16 pdiv)
{
        switch (data->index) {
        case 0:
                regmap_update_bits(data->chip->regmap,
                        CDCE925_REG_Y1SPIPDIVH,
                        0x03, (pdiv >> 8) & 0x03);
                regmap_write(data->chip->regmap, 0x03, pdiv & 0xFF);
                break;
        case 1:
                regmap_update_bits(data->chip->regmap, 0x16, 0x7F, pdiv);
                break;
        case 2:
                regmap_update_bits(data->chip->regmap, 0x17, 0x7F, pdiv);
                break;
        case 3:
                regmap_update_bits(data->chip->regmap, 0x26, 0x7F, pdiv);
                break;
        case 4:
                regmap_update_bits(data->chip->regmap, 0x27, 0x7F, pdiv);
                break;
        }
}

static void cdce925_clk_activate(struct clk_cdce925_output *data)
{
        switch (data->index) {
        case 0:
                regmap_update_bits(data->chip->regmap,
                        CDCE925_REG_Y1SPIPDIVH, 0x0c, 0x0c);
                break;
        case 1:
        case 2:
                regmap_update_bits(data->chip->regmap, 0x14, 0x03, 0x03);
                break;
        case 3:
        case 4:
                regmap_update_bits(data->chip->regmap, 0x24, 0x03, 0x03);
                break;
        }
}

static int cdce925_clk_prepare(struct clk_hw *hw)
{
        struct clk_cdce925_output *data = to_clk_cdce925_output(hw);

        cdce925_clk_set_pdiv(data, data->pdiv);
        cdce925_clk_activate(data);
        return 0;
}

static void cdce925_clk_unprepare(struct clk_hw *hw)
{
        struct clk_cdce925_output *data = to_clk_cdce925_output(hw);

        /* Disable clock by setting divider to "0" */
        cdce925_clk_set_pdiv(data, 0);
}

static unsigned long cdce925_clk_recalc_rate(struct clk_hw *hw,
                unsigned long parent_rate)
{
        struct clk_cdce925_output *data = to_clk_cdce925_output(hw);

        if (data->pdiv)
                return parent_rate / data->pdiv;
        return 0;
}

static u16 cdce925_calc_divider(unsigned long rate,
                unsigned long parent_rate)
{
        unsigned long divider;

        if (!rate)
                return 0;
        if (rate >= parent_rate)
                return 1;

        divider = DIV_ROUND_CLOSEST(parent_rate, rate);
        if (divider > 0x7F)
                divider = 0x7F;

        return (u16)divider;
}

static unsigned long cdce925_clk_best_parent_rate(
        struct clk_hw *hw, unsigned long rate)
{
        struct clk *pll = clk_get_parent(hw->clk);
        struct clk *root = clk_get_parent(pll);
        unsigned long root_rate = clk_get_rate(root);
        unsigned long best_rate_error = rate;
        u16 pdiv_min;
        u16 pdiv_max;
        u16 pdiv_best;
        u16 pdiv_now;

        if (root_rate % rate == 0)
                return root_rate; /* Don't need the PLL, use bypass */

        pdiv_min = (u16)max(1ul, DIV_ROUND_UP(CDCE925_PLL_FREQUENCY_MIN, rate));
        pdiv_max = (u16)min(127ul, CDCE925_PLL_FREQUENCY_MAX / rate);

        if (pdiv_min > pdiv_max)
                return 0; /* No can do? */

        pdiv_best = pdiv_min;
        for (pdiv_now = pdiv_min; pdiv_now < pdiv_max; ++pdiv_now) {
                unsigned long target_rate = rate * pdiv_now;
                long pll_rate = clk_round_rate(pll, target_rate);
                unsigned long actual_rate;
                unsigned long rate_error;

                if (pll_rate <= 0)
                        continue;
                actual_rate = pll_rate / pdiv_now;
                rate_error = abs((long)actual_rate - (long)rate);
                if (rate_error < best_rate_error) {
                        pdiv_best = pdiv_now;
                        best_rate_error = rate_error;
                }
                /* TODO: Consider PLL frequency based on smaller n/m values
                 * and pick the better one if the error is equal */
        }

        return rate * pdiv_best;
}

static long cdce925_clk_round_rate(struct clk_hw *hw, unsigned long rate,
                unsigned long *parent_rate)
{
        unsigned long l_parent_rate = *parent_rate;
        u16 divider = cdce925_calc_divider(rate, l_parent_rate);

        if (l_parent_rate / divider != rate) {
                l_parent_rate = cdce925_clk_best_parent_rate(hw, rate);
                divider = cdce925_calc_divider(rate, l_parent_rate);
                *parent_rate = l_parent_rate;
        }

        if (divider)
                return (long)(l_parent_rate / divider);
        return 0;
}

static int cdce925_clk_set_rate(struct clk_hw *hw, unsigned long rate,
                unsigned long parent_rate)
{
        struct clk_cdce925_output *data = to_clk_cdce925_output(hw);

        data->pdiv = cdce925_calc_divider(rate, parent_rate);

        return 0;
}

static const struct clk_ops cdce925_clk_ops = {
        .prepare = cdce925_clk_prepare,
        .unprepare = cdce925_clk_unprepare,
        .recalc_rate = cdce925_clk_recalc_rate,
        .round_rate = cdce925_clk_round_rate,
        .set_rate = cdce925_clk_set_rate,
};


static u16 cdce925_y1_calc_divider(unsigned long rate,
                unsigned long parent_rate)
{
        unsigned long divider;

        if (!rate)
                return 0;
        if (rate >= parent_rate)
                return 1;

        divider = DIV_ROUND_CLOSEST(parent_rate, rate);
        if (divider > 0x3FF) /* Y1 has 10-bit divider */
                divider = 0x3FF;

        return (u16)divider;
}

static long cdce925_clk_y1_round_rate(struct clk_hw *hw, unsigned long rate,
                unsigned long *parent_rate)
{
        unsigned long l_parent_rate = *parent_rate;
        u16 divider = cdce925_y1_calc_divider(rate, l_parent_rate);

        if (divider)
                return (long)(l_parent_rate / divider);
        return 0;
}

static int cdce925_clk_y1_set_rate(struct clk_hw *hw, unsigned long rate,
                unsigned long parent_rate)
{
        struct clk_cdce925_output *data = to_clk_cdce925_output(hw);

        data->pdiv = cdce925_y1_calc_divider(rate, parent_rate);

        return 0;
}

static const struct clk_ops cdce925_clk_y1_ops = {
        .prepare = cdce925_clk_prepare,
        .unprepare = cdce925_clk_unprepare,
        .recalc_rate = cdce925_clk_recalc_rate,
        .round_rate = cdce925_clk_y1_round_rate,
        .set_rate = cdce925_clk_y1_set_rate,
};


static struct regmap_config cdce925_regmap_config = {
        .name = "configuration0",
        .reg_bits = 8,
        .val_bits = 8,
        .cache_type = REGCACHE_RBTREE,
        .max_register = 0x2F,
};

#define CDCE925_I2C_COMMAND_BLOCK_TRANSFER      0x00
#define CDCE925_I2C_COMMAND_BYTE_TRANSFER       0x80

static int cdce925_regmap_i2c_write(
        void *context, const void *data, size_t count)
{
        struct device *dev = context;
        struct i2c_client *i2c = to_i2c_client(dev);
        int ret;
        u8 reg_data[2];

        if (count != 2)
                return -ENOTSUPP;

        /* First byte is command code */
        reg_data[0] = CDCE925_I2C_COMMAND_BYTE_TRANSFER | ((u8 *)data)[0];
        reg_data[1] = ((u8 *)data)[1];

        dev_dbg(&i2c->dev, "%s(%zu) %#x %#x\n", __func__, count,
                        reg_data[0], reg_data[1]);

        ret = i2c_master_send(i2c, reg_data, count);
        if (likely(ret == count))
                return 0;
        else if (ret < 0)
                return ret;
        else
                return -EIO;
}

static int cdce925_regmap_i2c_read(void *context,
           const void *reg, size_t reg_size, void *val, size_t val_size)
{
        struct device *dev = context;
        struct i2c_client *i2c = to_i2c_client(dev);
        struct i2c_msg xfer[2];
        int ret;
        u8 reg_data[2];

        if (reg_size != 1)
                return -ENOTSUPP;

        xfer[0].addr = i2c->addr;
        xfer[0].flags = 0;
        xfer[0].buf = reg_data;
        if (val_size == 1) {
                reg_data[0] =
                        CDCE925_I2C_COMMAND_BYTE_TRANSFER | ((u8 *)reg)[0];
                xfer[0].len = 1;
        } else {
                reg_data[0] =
                        CDCE925_I2C_COMMAND_BLOCK_TRANSFER | ((u8 *)reg)[0];
                reg_data[1] = val_size;
                xfer[0].len = 2;
        }

        xfer[1].addr = i2c->addr;
        xfer[1].flags = I2C_M_RD;
        xfer[1].len = val_size;
        xfer[1].buf = val;

        ret = i2c_transfer(i2c->adapter, xfer, 2);
        if (likely(ret == 2)) {
                dev_dbg(&i2c->dev, "%s(%zu, %zu) %#x %#x\n", __func__,
                                reg_size, val_size, reg_data[0], *((u8 *)val));
                return 0;
        } else if (ret < 0)
                return ret;
        else
                return -EIO;
}

/* The CDCE925 uses a funky way to read/write registers. Bulk mode is
 * just weird, so just use the single byte mode exclusively. */
static struct regmap_bus regmap_cdce925_bus = {
        .write = cdce925_regmap_i2c_write,
        .read = cdce925_regmap_i2c_read,
};

static int cdce925_probe(struct i2c_client *client,
                const struct i2c_device_id *id)
{
        struct clk_cdce925_chip *data;
        struct device_node *node = client->dev.of_node;
        const char *parent_name;
        const char *pll_clk_name[NUMBER_OF_PLLS] = {NULL,};
        struct clk_init_data init;
        struct clk *clk;
        u32 value;
        int i;
        int err;
        struct device_node *np_output;
        char child_name[6];

        dev_dbg(&client->dev, "%s\n", __func__);
        data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        data->i2c_client = client;
        data->regmap = devm_regmap_init(&client->dev, &regmap_cdce925_bus,
                        &client->dev, &cdce925_regmap_config);
        if (IS_ERR(data->regmap)) {
                dev_err(&client->dev, "failed to allocate register map\n");
                return PTR_ERR(data->regmap);
        }
        i2c_set_clientdata(client, data);

        parent_name = of_clk_get_parent_name(node, 0);
        if (!parent_name) {
                dev_err(&client->dev, "missing parent clock\n");
                return -ENODEV;
        }
        dev_dbg(&client->dev, "parent is: %s\n", parent_name);

        if (of_property_read_u32(node, "xtal-load-pf", &value) == 0)
                regmap_write(data->regmap,
                        CDCE925_REG_XCSEL, (value << 3) & 0xF8);
        /* PWDN bit */
        regmap_update_bits(data->regmap, CDCE925_REG_GLOBAL1, BIT(4), 0);

        /* Set input source for Y1 to be the XTAL */
        regmap_update_bits(data->regmap, 0x02, BIT(7), 0);

        init.ops = &cdce925_pll_ops;
        init.flags = 0;
        init.parent_names = &parent_name;
        init.num_parents = parent_name ? 1 : 0;

        /* Register PLL clocks */
        for (i = 0; i < NUMBER_OF_PLLS; ++i) {
                pll_clk_name[i] = kasprintf(GFP_KERNEL, "%s.pll%d",
                        client->dev.of_node->name, i);
                init.name = pll_clk_name[i];
                data->pll[i].chip = data;
                data->pll[i].hw.init = &init;
                data->pll[i].index = i;
                clk = devm_clk_register(&client->dev, &data->pll[i].hw);
                if (IS_ERR(clk)) {
                        dev_err(&client->dev, "Failed register PLL %d\n", i);
                        err = PTR_ERR(clk);
                        goto error;
                }
                sprintf(child_name, "PLL%d", i+1);
                np_output = of_get_child_by_name(node, child_name);
                if (!np_output)
                        continue;
                if (!of_property_read_u32(np_output,
                        "clock-frequency", &value)) {
                        err = clk_set_rate(clk, value);
                        if (err)
                                dev_err(&client->dev,
                                        "unable to set PLL frequency %ud\n",
                                        value);
                }
                if (!of_property_read_u32(np_output,
                        "spread-spectrum", &value)) {
                        u8 flag = of_property_read_bool(np_output,
                                "spread-spectrum-center") ? 0x80 : 0x00;
                        regmap_update_bits(data->regmap,
                                0x16 + (i*CDCE925_OFFSET_PLL),
                                0x80, flag);
                        regmap_update_bits(data->regmap,
                                0x12 + (i*CDCE925_OFFSET_PLL),
                                0x07, value & 0x07);
                }
        }

        /* Register output clock Y1 */
        init.ops = &cdce925_clk_y1_ops;
        init.flags = 0;
        init.num_parents = 1;
        init.parent_names = &parent_name; /* Mux Y1 to input */
        init.name = kasprintf(GFP_KERNEL, "%s.Y1", client->dev.of_node->name);
        data->clk[0].chip = data;
        data->clk[0].hw.init = &init;
        data->clk[0].index = 0;
        data->clk[0].pdiv = 1;
        clk = devm_clk_register(&client->dev, &data->clk[0].hw);
        kfree(init.name); /* clock framework made a copy of the name */
        if (IS_ERR(clk)) {
                dev_err(&client->dev, "clock registration Y1 failed\n");
                err = PTR_ERR(clk);
                goto error;
        }
        data->dt_clk[0] = clk;

        /* Register output clocks Y2 .. Y5*/
        init.ops = &cdce925_clk_ops;
        init.flags = CLK_SET_RATE_PARENT;
        init.num_parents = 1;
        for (i = 1; i < NUMBER_OF_OUTPUTS; ++i) {
                init.name = kasprintf(GFP_KERNEL, "%s.Y%d",
                        client->dev.of_node->name, i+1);
                data->clk[i].chip = data;
                data->clk[i].hw.init = &init;
                data->clk[i].index = i;
                data->clk[i].pdiv = 1;
                switch (i) {
                case 1:
                case 2:
                        /* Mux Y2/3 to PLL1 */
                        init.parent_names = &pll_clk_name[0];
                        break;
                case 3:
                case 4:
                        /* Mux Y4/5 to PLL2 */
                        init.parent_names = &pll_clk_name[1];
                        break;
                }
                clk = devm_clk_register(&client->dev, &data->clk[i].hw);
                kfree(init.name); /* clock framework made a copy of the name */
                if (IS_ERR(clk)) {
                        dev_err(&client->dev, "clock registration failed\n");
                        err = PTR_ERR(clk);
                        goto error;
                }
                data->dt_clk[i] = clk;
        }

        /* Register the output clocks */
        data->onecell.clk_num = NUMBER_OF_OUTPUTS;
        data->onecell.clks = data->dt_clk;
        err = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get,
                &data->onecell);
        if (err)
                dev_err(&client->dev, "unable to add OF clock provider\n");

        err = 0;

error:
        for (i = 0; i < NUMBER_OF_PLLS; ++i)
                /* clock framework made a copy of the name */
                kfree(pll_clk_name[i]);

        return err;
}

static const struct i2c_device_id cdce925_id[] = {
        { "cdce925", 0 },
        { }
};
MODULE_DEVICE_TABLE(i2c, cdce925_id);

static const struct of_device_id clk_cdce925_of_match[] = {
        { .compatible = "ti,cdce925" },
        { },
};
MODULE_DEVICE_TABLE(of, clk_cdce925_of_match);

static struct i2c_driver cdce925_driver = {
        .driver = {
                .name = "cdce925",
                .of_match_table = of_match_ptr(clk_cdce925_of_match),
        },
        .probe          = cdce925_probe,
        .id_table       = cdce925_id,
};
module_i2c_driver(cdce925_driver);

MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
MODULE_DESCRIPTION("cdce925 driver");
MODULE_LICENSE("GPL");