linux/drivers/hwmon/tmp401.c
<<
>>
Prefs
   1/* tmp401.c
   2 *
   3 * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
   4 * Preliminary tmp411 support by:
   5 * Gabriel Konat, Sander Leget, Wouter Willems
   6 * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
   7 *
   8 * Cleanup and support for TMP431 and TMP432 by Guenter Roeck
   9 * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License as published by
  13 * the Free Software Foundation; either version 2 of the License, or
  14 * (at your option) any later version.
  15 *
  16 * This program is distributed in the hope that it will be useful,
  17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19 * GNU General Public License for more details.
  20 *
  21 * You should have received a copy of the GNU General Public License
  22 * along with this program; if not, write to the Free Software
  23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  24 */
  25
  26/*
  27 * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
  28 *
  29 * Note this IC is in some aspect similar to the LM90, but it has quite a
  30 * few differences too, for example the local temp has a higher resolution
  31 * and thus has 16 bits registers for its value and limit instead of 8 bits.
  32 */
  33
  34#include <linux/module.h>
  35#include <linux/init.h>
  36#include <linux/bitops.h>
  37#include <linux/slab.h>
  38#include <linux/jiffies.h>
  39#include <linux/i2c.h>
  40#include <linux/hwmon.h>
  41#include <linux/hwmon-sysfs.h>
  42#include <linux/err.h>
  43#include <linux/mutex.h>
  44#include <linux/sysfs.h>
  45
  46/* Addresses to scan */
  47static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d,
  48        0x4e, 0x4f, I2C_CLIENT_END };
  49
  50enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
  51
  52/*
  53 * The TMP401 registers, note some registers have different addresses for
  54 * reading and writing
  55 */
  56#define TMP401_STATUS                           0x02
  57#define TMP401_CONFIG_READ                      0x03
  58#define TMP401_CONFIG_WRITE                     0x09
  59#define TMP401_CONVERSION_RATE_READ             0x04
  60#define TMP401_CONVERSION_RATE_WRITE            0x0A
  61#define TMP401_TEMP_CRIT_HYST                   0x21
  62#define TMP401_MANUFACTURER_ID_REG              0xFE
  63#define TMP401_DEVICE_ID_REG                    0xFF
  64
  65static const u8 TMP401_TEMP_MSB_READ[6][2] = {
  66        { 0x00, 0x01 }, /* temp */
  67        { 0x06, 0x08 }, /* low limit */
  68        { 0x05, 0x07 }, /* high limit */
  69        { 0x20, 0x19 }, /* therm (crit) limit */
  70        { 0x30, 0x34 }, /* lowest */
  71        { 0x32, 0x36 }, /* highest */
  72};
  73
  74static const u8 TMP401_TEMP_MSB_WRITE[6][2] = {
  75        { 0, 0 },       /* temp (unused) */
  76        { 0x0C, 0x0E }, /* low limit */
  77        { 0x0B, 0x0D }, /* high limit */
  78        { 0x20, 0x19 }, /* therm (crit) limit */
  79        { 0x30, 0x34 }, /* lowest */
  80        { 0x32, 0x36 }, /* highest */
  81};
  82
  83static const u8 TMP401_TEMP_LSB[6][2] = {
  84        { 0x15, 0x10 }, /* temp */
  85        { 0x17, 0x14 }, /* low limit */
  86        { 0x16, 0x13 }, /* high limit */
  87        { 0, 0 },       /* therm (crit) limit (unused) */
  88        { 0x31, 0x35 }, /* lowest */
  89        { 0x33, 0x37 }, /* highest */
  90};
  91
  92static const u8 TMP432_TEMP_MSB_READ[4][3] = {
  93        { 0x00, 0x01, 0x23 },   /* temp */
  94        { 0x06, 0x08, 0x16 },   /* low limit */
  95        { 0x05, 0x07, 0x15 },   /* high limit */
  96        { 0x20, 0x19, 0x1A },   /* therm (crit) limit */
  97};
  98
  99static const u8 TMP432_TEMP_MSB_WRITE[4][3] = {
 100        { 0, 0, 0 },            /* temp  - unused */
 101        { 0x0C, 0x0E, 0x16 },   /* low limit */
 102        { 0x0B, 0x0D, 0x15 },   /* high limit */
 103        { 0x20, 0x19, 0x1A },   /* therm (crit) limit */
 104};
 105
 106static const u8 TMP432_TEMP_LSB[3][3] = {
 107        { 0x29, 0x10, 0x24 },   /* temp */
 108        { 0x3E, 0x14, 0x18 },   /* low limit */
 109        { 0x3D, 0x13, 0x17 },   /* high limit */
 110};
 111
 112/* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
 113static const u8 TMP432_STATUS_REG[] = {
 114        0x1b, 0x36, 0x35, 0x37 };
 115
 116/* Flags */
 117#define TMP401_CONFIG_RANGE                     BIT(2)
 118#define TMP401_CONFIG_SHUTDOWN                  BIT(6)
 119#define TMP401_STATUS_LOCAL_CRIT                BIT(0)
 120#define TMP401_STATUS_REMOTE_CRIT               BIT(1)
 121#define TMP401_STATUS_REMOTE_OPEN               BIT(2)
 122#define TMP401_STATUS_REMOTE_LOW                BIT(3)
 123#define TMP401_STATUS_REMOTE_HIGH               BIT(4)
 124#define TMP401_STATUS_LOCAL_LOW                 BIT(5)
 125#define TMP401_STATUS_LOCAL_HIGH                BIT(6)
 126
 127/* On TMP432, each status has its own register */
 128#define TMP432_STATUS_LOCAL                     BIT(0)
 129#define TMP432_STATUS_REMOTE1                   BIT(1)
 130#define TMP432_STATUS_REMOTE2                   BIT(2)
 131
 132/* Manufacturer / Device ID's */
 133#define TMP401_MANUFACTURER_ID                  0x55
 134#define TMP401_DEVICE_ID                        0x11
 135#define TMP411A_DEVICE_ID                       0x12
 136#define TMP411B_DEVICE_ID                       0x13
 137#define TMP411C_DEVICE_ID                       0x10
 138#define TMP431_DEVICE_ID                        0x31
 139#define TMP432_DEVICE_ID                        0x32
 140#define TMP435_DEVICE_ID                        0x35
 141
 142/*
 143 * Driver data (common to all clients)
 144 */
 145
 146static const struct i2c_device_id tmp401_id[] = {
 147        { "tmp401", tmp401 },
 148        { "tmp411", tmp411 },
 149        { "tmp431", tmp431 },
 150        { "tmp432", tmp432 },
 151        { "tmp435", tmp435 },
 152        { }
 153};
 154MODULE_DEVICE_TABLE(i2c, tmp401_id);
 155
 156/*
 157 * Client data (each client gets its own)
 158 */
 159
 160struct tmp401_data {
 161        struct i2c_client *client;
 162        const struct attribute_group *groups[3];
 163        struct mutex update_lock;
 164        char valid; /* zero until following fields are valid */
 165        unsigned long last_updated; /* in jiffies */
 166        enum chips kind;
 167
 168        unsigned int update_interval;   /* in milliseconds */
 169
 170        /* register values */
 171        u8 status[4];
 172        u8 config;
 173        u16 temp[6][3];
 174        u8 temp_crit_hyst;
 175};
 176
 177/*
 178 * Sysfs attr show / store functions
 179 */
 180
 181static int tmp401_register_to_temp(u16 reg, u8 config)
 182{
 183        int temp = reg;
 184
 185        if (config & TMP401_CONFIG_RANGE)
 186                temp -= 64 * 256;
 187
 188        return DIV_ROUND_CLOSEST(temp * 125, 32);
 189}
 190
 191static u16 tmp401_temp_to_register(long temp, u8 config, int zbits)
 192{
 193        if (config & TMP401_CONFIG_RANGE) {
 194                temp = clamp_val(temp, -64000, 191000);
 195                temp += 64000;
 196        } else
 197                temp = clamp_val(temp, 0, 127000);
 198
 199        return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
 200}
 201
 202static int tmp401_update_device_reg16(struct i2c_client *client,
 203                                      struct tmp401_data *data)
 204{
 205        int i, j, val;
 206        int num_regs = data->kind == tmp411 ? 6 : 4;
 207        int num_sensors = data->kind == tmp432 ? 3 : 2;
 208
 209        for (i = 0; i < num_sensors; i++) {             /* local / r1 / r2 */
 210                for (j = 0; j < num_regs; j++) {        /* temp / low / ... */
 211                        u8 regaddr;
 212                        /*
 213                         * High byte must be read first immediately followed
 214                         * by the low byte
 215                         */
 216                        regaddr = data->kind == tmp432 ?
 217                                                TMP432_TEMP_MSB_READ[j][i] :
 218                                                TMP401_TEMP_MSB_READ[j][i];
 219                        val = i2c_smbus_read_byte_data(client, regaddr);
 220                        if (val < 0)
 221                                return val;
 222                        data->temp[j][i] = val << 8;
 223                        if (j == 3)             /* crit is msb only */
 224                                continue;
 225                        regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i]
 226                                                       : TMP401_TEMP_LSB[j][i];
 227                        val = i2c_smbus_read_byte_data(client, regaddr);
 228                        if (val < 0)
 229                                return val;
 230                        data->temp[j][i] |= val;
 231                }
 232        }
 233        return 0;
 234}
 235
 236static struct tmp401_data *tmp401_update_device(struct device *dev)
 237{
 238        struct tmp401_data *data = dev_get_drvdata(dev);
 239        struct i2c_client *client = data->client;
 240        struct tmp401_data *ret = data;
 241        int i, val;
 242        unsigned long next_update;
 243
 244        mutex_lock(&data->update_lock);
 245
 246        next_update = data->last_updated +
 247                      msecs_to_jiffies(data->update_interval);
 248        if (time_after(jiffies, next_update) || !data->valid) {
 249                if (data->kind != tmp432) {
 250                        /*
 251                         * The driver uses the TMP432 status format internally.
 252                         * Convert status to TMP432 format for other chips.
 253                         */
 254                        val = i2c_smbus_read_byte_data(client, TMP401_STATUS);
 255                        if (val < 0) {
 256                                ret = ERR_PTR(val);
 257                                goto abort;
 258                        }
 259                        data->status[0] =
 260                          (val & TMP401_STATUS_REMOTE_OPEN) >> 1;
 261                        data->status[1] =
 262                          ((val & TMP401_STATUS_REMOTE_LOW) >> 2) |
 263                          ((val & TMP401_STATUS_LOCAL_LOW) >> 5);
 264                        data->status[2] =
 265                          ((val & TMP401_STATUS_REMOTE_HIGH) >> 3) |
 266                          ((val & TMP401_STATUS_LOCAL_HIGH) >> 6);
 267                        data->status[3] = val & (TMP401_STATUS_LOCAL_CRIT
 268                                                | TMP401_STATUS_REMOTE_CRIT);
 269                } else {
 270                        for (i = 0; i < ARRAY_SIZE(data->status); i++) {
 271                                val = i2c_smbus_read_byte_data(client,
 272                                                        TMP432_STATUS_REG[i]);
 273                                if (val < 0) {
 274                                        ret = ERR_PTR(val);
 275                                        goto abort;
 276                                }
 277                                data->status[i] = val;
 278                        }
 279                }
 280
 281                val = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
 282                if (val < 0) {
 283                        ret = ERR_PTR(val);
 284                        goto abort;
 285                }
 286                data->config = val;
 287                val = tmp401_update_device_reg16(client, data);
 288                if (val < 0) {
 289                        ret = ERR_PTR(val);
 290                        goto abort;
 291                }
 292                val = i2c_smbus_read_byte_data(client, TMP401_TEMP_CRIT_HYST);
 293                if (val < 0) {
 294                        ret = ERR_PTR(val);
 295                        goto abort;
 296                }
 297                data->temp_crit_hyst = val;
 298
 299                data->last_updated = jiffies;
 300                data->valid = 1;
 301        }
 302
 303abort:
 304        mutex_unlock(&data->update_lock);
 305        return ret;
 306}
 307
 308static ssize_t show_temp(struct device *dev,
 309                         struct device_attribute *devattr, char *buf)
 310{
 311        int nr = to_sensor_dev_attr_2(devattr)->nr;
 312        int index = to_sensor_dev_attr_2(devattr)->index;
 313        struct tmp401_data *data = tmp401_update_device(dev);
 314
 315        if (IS_ERR(data))
 316                return PTR_ERR(data);
 317
 318        return sprintf(buf, "%d\n",
 319                tmp401_register_to_temp(data->temp[nr][index], data->config));
 320}
 321
 322static ssize_t show_temp_crit_hyst(struct device *dev,
 323        struct device_attribute *devattr, char *buf)
 324{
 325        int temp, index = to_sensor_dev_attr(devattr)->index;
 326        struct tmp401_data *data = tmp401_update_device(dev);
 327
 328        if (IS_ERR(data))
 329                return PTR_ERR(data);
 330
 331        mutex_lock(&data->update_lock);
 332        temp = tmp401_register_to_temp(data->temp[3][index], data->config);
 333        temp -= data->temp_crit_hyst * 1000;
 334        mutex_unlock(&data->update_lock);
 335
 336        return sprintf(buf, "%d\n", temp);
 337}
 338
 339static ssize_t show_status(struct device *dev,
 340        struct device_attribute *devattr, char *buf)
 341{
 342        int nr = to_sensor_dev_attr_2(devattr)->nr;
 343        int mask = to_sensor_dev_attr_2(devattr)->index;
 344        struct tmp401_data *data = tmp401_update_device(dev);
 345
 346        if (IS_ERR(data))
 347                return PTR_ERR(data);
 348
 349        return sprintf(buf, "%d\n", !!(data->status[nr] & mask));
 350}
 351
 352static ssize_t store_temp(struct device *dev, struct device_attribute *devattr,
 353                          const char *buf, size_t count)
 354{
 355        int nr = to_sensor_dev_attr_2(devattr)->nr;
 356        int index = to_sensor_dev_attr_2(devattr)->index;
 357        struct tmp401_data *data = dev_get_drvdata(dev);
 358        struct i2c_client *client = data->client;
 359        long val;
 360        u16 reg;
 361        u8 regaddr;
 362
 363        if (kstrtol(buf, 10, &val))
 364                return -EINVAL;
 365
 366        reg = tmp401_temp_to_register(val, data->config, nr == 3 ? 8 : 4);
 367
 368        mutex_lock(&data->update_lock);
 369
 370        regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index]
 371                                       : TMP401_TEMP_MSB_WRITE[nr][index];
 372        i2c_smbus_write_byte_data(client, regaddr, reg >> 8);
 373        if (nr != 3) {
 374                regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index]
 375                                               : TMP401_TEMP_LSB[nr][index];
 376                i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF);
 377        }
 378        data->temp[nr][index] = reg;
 379
 380        mutex_unlock(&data->update_lock);
 381
 382        return count;
 383}
 384
 385static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
 386        *devattr, const char *buf, size_t count)
 387{
 388        int temp, index = to_sensor_dev_attr(devattr)->index;
 389        struct tmp401_data *data = tmp401_update_device(dev);
 390        long val;
 391        u8 reg;
 392
 393        if (IS_ERR(data))
 394                return PTR_ERR(data);
 395
 396        if (kstrtol(buf, 10, &val))
 397                return -EINVAL;
 398
 399        if (data->config & TMP401_CONFIG_RANGE)
 400                val = clamp_val(val, -64000, 191000);
 401        else
 402                val = clamp_val(val, 0, 127000);
 403
 404        mutex_lock(&data->update_lock);
 405        temp = tmp401_register_to_temp(data->temp[3][index], data->config);
 406        val = clamp_val(val, temp - 255000, temp);
 407        reg = ((temp - val) + 500) / 1000;
 408
 409        i2c_smbus_write_byte_data(data->client, TMP401_TEMP_CRIT_HYST,
 410                                  reg);
 411
 412        data->temp_crit_hyst = reg;
 413
 414        mutex_unlock(&data->update_lock);
 415
 416        return count;
 417}
 418
 419/*
 420 * Resets the historical measurements of minimum and maximum temperatures.
 421 * This is done by writing any value to any of the minimum/maximum registers
 422 * (0x30-0x37).
 423 */
 424static ssize_t reset_temp_history(struct device *dev,
 425        struct device_attribute *devattr, const char *buf, size_t count)
 426{
 427        struct tmp401_data *data = dev_get_drvdata(dev);
 428        struct i2c_client *client = data->client;
 429        long val;
 430
 431        if (kstrtol(buf, 10, &val))
 432                return -EINVAL;
 433
 434        if (val != 1) {
 435                dev_err(dev,
 436                        "temp_reset_history value %ld not supported. Use 1 to reset the history!\n",
 437                        val);
 438                return -EINVAL;
 439        }
 440        mutex_lock(&data->update_lock);
 441        i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val);
 442        data->valid = 0;
 443        mutex_unlock(&data->update_lock);
 444
 445        return count;
 446}
 447
 448static ssize_t show_update_interval(struct device *dev,
 449                                    struct device_attribute *attr, char *buf)
 450{
 451        struct tmp401_data *data = dev_get_drvdata(dev);
 452
 453        return sprintf(buf, "%u\n", data->update_interval);
 454}
 455
 456static ssize_t set_update_interval(struct device *dev,
 457                                   struct device_attribute *attr,
 458                                   const char *buf, size_t count)
 459{
 460        struct tmp401_data *data = dev_get_drvdata(dev);
 461        struct i2c_client *client = data->client;
 462        unsigned long val;
 463        int err, rate;
 464
 465        err = kstrtoul(buf, 10, &val);
 466        if (err)
 467                return err;
 468
 469        /*
 470         * For valid rates, interval can be calculated as
 471         *      interval = (1 << (7 - rate)) * 125;
 472         * Rounded rate is therefore
 473         *      rate = 7 - __fls(interval * 4 / (125 * 3));
 474         * Use clamp_val() to avoid overflows, and to ensure valid input
 475         * for __fls.
 476         */
 477        val = clamp_val(val, 125, 16000);
 478        rate = 7 - __fls(val * 4 / (125 * 3));
 479        mutex_lock(&data->update_lock);
 480        i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, rate);
 481        data->update_interval = (1 << (7 - rate)) * 125;
 482        mutex_unlock(&data->update_lock);
 483
 484        return count;
 485}
 486
 487static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
 488static SENSOR_DEVICE_ATTR_2(temp1_min, S_IWUSR | S_IRUGO, show_temp,
 489                            store_temp, 1, 0);
 490static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp,
 491                            store_temp, 2, 0);
 492static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IWUSR | S_IRUGO, show_temp,
 493                            store_temp, 3, 0);
 494static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
 495                          show_temp_crit_hyst, store_temp_crit_hyst, 0);
 496static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_status, NULL,
 497                            1, TMP432_STATUS_LOCAL);
 498static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_status, NULL,
 499                            2, TMP432_STATUS_LOCAL);
 500static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_status, NULL,
 501                            3, TMP432_STATUS_LOCAL);
 502static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
 503static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp,
 504                            store_temp, 1, 1);
 505static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp,
 506                            store_temp, 2, 1);
 507static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IWUSR | S_IRUGO, show_temp,
 508                            store_temp, 3, 1);
 509static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst,
 510                          NULL, 1);
 511static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_status, NULL,
 512                            0, TMP432_STATUS_REMOTE1);
 513static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_status, NULL,
 514                            1, TMP432_STATUS_REMOTE1);
 515static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_status, NULL,
 516                            2, TMP432_STATUS_REMOTE1);
 517static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_status, NULL,
 518                            3, TMP432_STATUS_REMOTE1);
 519
 520static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
 521                   set_update_interval);
 522
 523static struct attribute *tmp401_attributes[] = {
 524        &sensor_dev_attr_temp1_input.dev_attr.attr,
 525        &sensor_dev_attr_temp1_min.dev_attr.attr,
 526        &sensor_dev_attr_temp1_max.dev_attr.attr,
 527        &sensor_dev_attr_temp1_crit.dev_attr.attr,
 528        &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
 529        &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
 530        &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
 531        &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
 532
 533        &sensor_dev_attr_temp2_input.dev_attr.attr,
 534        &sensor_dev_attr_temp2_min.dev_attr.attr,
 535        &sensor_dev_attr_temp2_max.dev_attr.attr,
 536        &sensor_dev_attr_temp2_crit.dev_attr.attr,
 537        &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
 538        &sensor_dev_attr_temp2_fault.dev_attr.attr,
 539        &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
 540        &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
 541        &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
 542
 543        &dev_attr_update_interval.attr,
 544
 545        NULL
 546};
 547
 548static const struct attribute_group tmp401_group = {
 549        .attrs = tmp401_attributes,
 550};
 551
 552/*
 553 * Additional features of the TMP411 chip.
 554 * The TMP411 stores the minimum and maximum
 555 * temperature measured since power-on, chip-reset, or
 556 * minimum and maximum register reset for both the local
 557 * and remote channels.
 558 */
 559static SENSOR_DEVICE_ATTR_2(temp1_lowest, S_IRUGO, show_temp, NULL, 4, 0);
 560static SENSOR_DEVICE_ATTR_2(temp1_highest, S_IRUGO, show_temp, NULL, 5, 0);
 561static SENSOR_DEVICE_ATTR_2(temp2_lowest, S_IRUGO, show_temp, NULL, 4, 1);
 562static SENSOR_DEVICE_ATTR_2(temp2_highest, S_IRUGO, show_temp, NULL, 5, 1);
 563static SENSOR_DEVICE_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history,
 564                          0);
 565
 566static struct attribute *tmp411_attributes[] = {
 567        &sensor_dev_attr_temp1_highest.dev_attr.attr,
 568        &sensor_dev_attr_temp1_lowest.dev_attr.attr,
 569        &sensor_dev_attr_temp2_highest.dev_attr.attr,
 570        &sensor_dev_attr_temp2_lowest.dev_attr.attr,
 571        &sensor_dev_attr_temp_reset_history.dev_attr.attr,
 572        NULL
 573};
 574
 575static const struct attribute_group tmp411_group = {
 576        .attrs = tmp411_attributes,
 577};
 578
 579static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2);
 580static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp,
 581                            store_temp, 1, 2);
 582static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp,
 583                            store_temp, 2, 2);
 584static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
 585                            store_temp, 3, 2);
 586static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst,
 587                          NULL, 2);
 588static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_status, NULL,
 589                            0, TMP432_STATUS_REMOTE2);
 590static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_status, NULL,
 591                            1, TMP432_STATUS_REMOTE2);
 592static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_status, NULL,
 593                            2, TMP432_STATUS_REMOTE2);
 594static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_status, NULL,
 595                            3, TMP432_STATUS_REMOTE2);
 596
 597static struct attribute *tmp432_attributes[] = {
 598        &sensor_dev_attr_temp3_input.dev_attr.attr,
 599        &sensor_dev_attr_temp3_min.dev_attr.attr,
 600        &sensor_dev_attr_temp3_max.dev_attr.attr,
 601        &sensor_dev_attr_temp3_crit.dev_attr.attr,
 602        &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
 603        &sensor_dev_attr_temp3_fault.dev_attr.attr,
 604        &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
 605        &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
 606        &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
 607
 608        NULL
 609};
 610
 611static const struct attribute_group tmp432_group = {
 612        .attrs = tmp432_attributes,
 613};
 614
 615/*
 616 * Begin non sysfs callback code (aka Real code)
 617 */
 618
 619static int tmp401_init_client(struct tmp401_data *data,
 620                              struct i2c_client *client)
 621{
 622        int config, config_orig, status = 0;
 623
 624        /* Set the conversion rate to 2 Hz */
 625        i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
 626        data->update_interval = 500;
 627
 628        /* Start conversions (disable shutdown if necessary) */
 629        config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
 630        if (config < 0)
 631                return config;
 632
 633        config_orig = config;
 634        config &= ~TMP401_CONFIG_SHUTDOWN;
 635
 636        if (config != config_orig)
 637                status = i2c_smbus_write_byte_data(client,
 638                                                   TMP401_CONFIG_WRITE,
 639                                                   config);
 640
 641        return status;
 642}
 643
 644static int tmp401_detect(struct i2c_client *client,
 645                         struct i2c_board_info *info)
 646{
 647        enum chips kind;
 648        struct i2c_adapter *adapter = client->adapter;
 649        u8 reg;
 650
 651        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 652                return -ENODEV;
 653
 654        /* Detect and identify the chip */
 655        reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
 656        if (reg != TMP401_MANUFACTURER_ID)
 657                return -ENODEV;
 658
 659        reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
 660
 661        switch (reg) {
 662        case TMP401_DEVICE_ID:
 663                if (client->addr != 0x4c)
 664                        return -ENODEV;
 665                kind = tmp401;
 666                break;
 667        case TMP411A_DEVICE_ID:
 668                if (client->addr != 0x4c)
 669                        return -ENODEV;
 670                kind = tmp411;
 671                break;
 672        case TMP411B_DEVICE_ID:
 673                if (client->addr != 0x4d)
 674                        return -ENODEV;
 675                kind = tmp411;
 676                break;
 677        case TMP411C_DEVICE_ID:
 678                if (client->addr != 0x4e)
 679                        return -ENODEV;
 680                kind = tmp411;
 681                break;
 682        case TMP431_DEVICE_ID:
 683                if (client->addr != 0x4c && client->addr != 0x4d)
 684                        return -ENODEV;
 685                kind = tmp431;
 686                break;
 687        case TMP432_DEVICE_ID:
 688                if (client->addr != 0x4c && client->addr != 0x4d)
 689                        return -ENODEV;
 690                kind = tmp432;
 691                break;
 692        case TMP435_DEVICE_ID:
 693                kind = tmp435;
 694                break;
 695        default:
 696                return -ENODEV;
 697        }
 698
 699        reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
 700        if (reg & 0x1b)
 701                return -ENODEV;
 702
 703        reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
 704        /* Datasheet says: 0x1-0x6 */
 705        if (reg > 15)
 706                return -ENODEV;
 707
 708        strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
 709
 710        return 0;
 711}
 712
 713static int tmp401_probe(struct i2c_client *client,
 714                        const struct i2c_device_id *id)
 715{
 716        static const char * const names[] = {
 717                "TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
 718        };
 719        struct device *dev = &client->dev;
 720        struct device *hwmon_dev;
 721        struct tmp401_data *data;
 722        int groups = 0, status;
 723
 724        data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
 725        if (!data)
 726                return -ENOMEM;
 727
 728        data->client = client;
 729        mutex_init(&data->update_lock);
 730        data->kind = id->driver_data;
 731
 732        /* Initialize the TMP401 chip */
 733        status = tmp401_init_client(data, client);
 734        if (status < 0)
 735                return status;
 736
 737        /* Register sysfs hooks */
 738        data->groups[groups++] = &tmp401_group;
 739
 740        /* Register additional tmp411 sysfs hooks */
 741        if (data->kind == tmp411)
 742                data->groups[groups++] = &tmp411_group;
 743
 744        /* Register additional tmp432 sysfs hooks */
 745        if (data->kind == tmp432)
 746                data->groups[groups++] = &tmp432_group;
 747
 748        hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 749                                                           data, data->groups);
 750        if (IS_ERR(hwmon_dev))
 751                return PTR_ERR(hwmon_dev);
 752
 753        dev_info(dev, "Detected TI %s chip\n", names[data->kind]);
 754
 755        return 0;
 756}
 757
 758static struct i2c_driver tmp401_driver = {
 759        .class          = I2C_CLASS_HWMON,
 760        .driver = {
 761                .name   = "tmp401",
 762        },
 763        .probe          = tmp401_probe,
 764        .id_table       = tmp401_id,
 765        .detect         = tmp401_detect,
 766        .address_list   = normal_i2c,
 767};
 768
 769module_i2c_driver(tmp401_driver);
 770
 771MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
 772MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
 773MODULE_LICENSE("GPL");
 774