LXR linux/drivers/message/fusion/lsi/mpi

   1/*
   2 *  Copyright (c) 2004-2008 LSI Corporation.
   3 *
   4 *
   5 *           Name:  mpi_sas.h
   6 *          Title:  MPI Serial Attached SCSI structures and definitions
   7 *  Creation Date:  August 19, 2004
   8 *
   9 *    mpi_sas.h Version:  01.05.05
  10 *
  11 *  Version History
  12 *  ---------------
  13 *
  14 *  Date      Version   Description
  15 *  --------  --------  ------------------------------------------------------
  16 *  08-19-04  01.05.01  Original release.
  17 *  08-30-05  01.05.02  Added DeviceInfo bit for SEP.
  18 *                      Added PrimFlags and Primitive field to SAS IO Unit
  19 *                      Control request, and added a new operation code.
  20 *  03-27-06  01.05.03  Added Force Full Discovery, Transmit Port Select Signal,
  21 *                      and Remove Device operations to SAS IO Unit Control.
  22 *                      Added DevHandle field to SAS IO Unit Control request and
  23 *                      reply.
  24 *  10-11-06  01.05.04  Fixed the name of a define for Operation field of SAS IO
  25 *                      Unit Control request.
  26 *  01-15-08  01.05.05  Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
  27 *                      including adding IOCParameter and IOCParameter value
  28 *                      fields to SAS IO Unit Control Request.
  29 *                      Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
  30 *  --------------------------------------------------------------------------
  31 */
  32
  33#ifndef MPI_SAS_H
  34#define MPI_SAS_H
  35
  36
  37/*
  38 * Values for SASStatus.
  39 */
  40#define MPI_SASSTATUS_SUCCESS                           (0x00)
  41#define MPI_SASSTATUS_UNKNOWN_ERROR                     (0x01)
  42#define MPI_SASSTATUS_INVALID_FRAME                     (0x02)
  43#define MPI_SASSTATUS_UTC_BAD_DEST                      (0x03)
  44#define MPI_SASSTATUS_UTC_BREAK_RECEIVED                (0x04)
  45#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED    (0x05)
  46#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST            (0x06)
  47#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED        (0x07)
  48#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY            (0x08)
  49#define MPI_SASSTATUS_UTC_WRONG_DESTINATION             (0x09)
  50#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT            (0x0A)
  51#define MPI_SASSTATUS_LONG_INFORMATION_UNIT             (0x0B)
  52#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA     (0x0C)
  53#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR     (0x0D)
  54#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED             (0x0E)
  55#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH        (0x0F)
  56#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA           (0x10)
  57#define MPI_SASSTATUS_DATA_OFFSET_ERROR                 (0x11)
  58#define MPI_SASSTATUS_SDSF_NAK_RECEIVED                 (0x12)
  59#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED            (0x13)
  60#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT        (0x14)
  61
  62
  63/*
  64 * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
  65 * data and SAS IO Unit Configuration pages.
  66 */
  67#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC    (0xF0000000)
  68
  69#define MPI_SAS_DEVICE_INFO_SEP                 (0x00004000)
  70#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE        (0x00002000)
  71#define MPI_SAS_DEVICE_INFO_LSI_DEVICE          (0x00001000)
  72#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH       (0x00000800)
  73#define MPI_SAS_DEVICE_INFO_SSP_TARGET          (0x00000400)
  74#define MPI_SAS_DEVICE_INFO_STP_TARGET          (0x00000200)
  75#define MPI_SAS_DEVICE_INFO_SMP_TARGET          (0x00000100)
  76#define MPI_SAS_DEVICE_INFO_SATA_DEVICE         (0x00000080)
  77#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR       (0x00000040)
  78#define MPI_SAS_DEVICE_INFO_STP_INITIATOR       (0x00000020)
  79#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR       (0x00000010)
  80#define MPI_SAS_DEVICE_INFO_SATA_HOST           (0x00000008)
  81
  82#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE    (0x00000007)
  83#define MPI_SAS_DEVICE_INFO_NO_DEVICE           (0x00000000)
  84#define MPI_SAS_DEVICE_INFO_END_DEVICE          (0x00000001)
  85#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER       (0x00000002)
  86#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER     (0x00000003)
  87
  88
  89
  90/*****************************************************************************
  91*
  92*        S e r i a l    A t t a c h e d    S C S I     M e s s a g e s
  93*
  94*****************************************************************************/
  95
  96/****************************************************************************/
  97/* Serial Management Protocol Passthrough Request                           */
  98/****************************************************************************/
  99
 100typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
 101{
 102    U8                      PassthroughFlags;   /* 00h */
 103    U8                      PhysicalPort;       /* 01h */
 104    U8                      ChainOffset;        /* 02h */
 105    U8                      Function;           /* 03h */
 106    U16                     RequestDataLength;  /* 04h */
 107    U8                      ConnectionRate;     /* 06h */
 108    U8                      MsgFlags;           /* 07h */
 109    U32                     MsgContext;         /* 08h */
 110    U32                     Reserved1;          /* 0Ch */
 111    U64                     SASAddress;         /* 10h */
 112    U32                     Reserved2;          /* 18h */
 113    U32                     Reserved3;          /* 1Ch */
 114    SGE_SIMPLE_UNION        SGL;                /* 20h */
 115} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
 116  SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
 117
 118/* values for PassthroughFlags field */
 119#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE       (0x80)
 120
 121/* values for ConnectionRate field */
 122#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED  (0x00)
 123#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5         (0x08)
 124#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0         (0x09)
 125
 126
 127/* Serial Management Protocol Passthrough Reply */
 128typedef struct _MSG_SMP_PASSTHROUGH_REPLY
 129{
 130    U8                      PassthroughFlags;   /* 00h */
 131    U8                      PhysicalPort;       /* 01h */
 132    U8                      MsgLength;          /* 02h */
 133    U8                      Function;           /* 03h */
 134    U16                     ResponseDataLength; /* 04h */
 135    U8                      Reserved1;          /* 06h */
 136    U8                      MsgFlags;           /* 07h */
 137    U32                     MsgContext;         /* 08h */
 138    U8                      Reserved2;          /* 0Ch */
 139    U8                      SASStatus;          /* 0Dh */
 140    U16                     IOCStatus;          /* 0Eh */
 141    U32                     IOCLogInfo;         /* 10h */
 142    U32                     Reserved3;          /* 14h */
 143    U8                      ResponseData[4];    /* 18h */
 144} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
 145  SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;
 146
 147#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE     (0x80)
 148
 149
 150/****************************************************************************/
 151/* SATA Passthrough Request                                                 */
 152/****************************************************************************/
 153
 154typedef struct _MSG_SATA_PASSTHROUGH_REQUEST
 155{
 156    U8                      TargetID;           /* 00h */
 157    U8                      Bus;                /* 01h */
 158    U8                      ChainOffset;        /* 02h */
 159    U8                      Function;           /* 03h */
 160    U16                     PassthroughFlags;   /* 04h */
 161    U8                      ConnectionRate;     /* 06h */
 162    U8                      MsgFlags;           /* 07h */
 163    U32                     MsgContext;         /* 08h */
 164    U32                     Reserved1;          /* 0Ch */
 165    U32                     Reserved2;          /* 10h */
 166    U32                     Reserved3;          /* 14h */
 167    U32                     DataLength;         /* 18h */
 168    U8                      CommandFIS[20];     /* 1Ch */
 169    SGE_SIMPLE_UNION        SGL;                /* 30h */
 170} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST,
 171  SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t;
 172
 173/* values for PassthroughFlags field */
 174#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE   (0x0200)
 175#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG   (0x0100)
 176#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED     (0x0080)
 177#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040)
 178#define MPI_SATA_PT_REQ_PT_FLAGS_DMA            (0x0020)
 179#define MPI_SATA_PT_REQ_PT_FLAGS_PIO            (0x0010)
 180#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
 181#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE          (0x0002)
 182#define MPI_SATA_PT_REQ_PT_FLAGS_READ           (0x0001)
 183
 184/* values for ConnectionRate field */
 185#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
 186#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5        (0x08)
 187#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0        (0x09)
 188
 189
 190/* SATA Passthrough Reply */
 191typedef struct _MSG_SATA_PASSTHROUGH_REPLY
 192{
 193    U8                      TargetID;           /* 00h */
 194    U8                      Bus;                /* 01h */
 195    U8                      MsgLength;          /* 02h */
 196    U8                      Function;           /* 03h */
 197    U16                     PassthroughFlags;   /* 04h */
 198    U8                      Reserved1;          /* 06h */
 199    U8                      MsgFlags;           /* 07h */
 200    U32                     MsgContext;         /* 08h */
 201    U8                      Reserved2;          /* 0Ch */
 202    U8                      SASStatus;          /* 0Dh */
 203    U16                     IOCStatus;          /* 0Eh */
 204    U32                     IOCLogInfo;         /* 10h */
 205    U8                      StatusFIS[20];      /* 14h */
 206    U32                     StatusControlRegisters; /* 28h */
 207    U32                     TransferCount;      /* 2Ch */
 208} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY,
 209  SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t;
 210
 211
 212
 213
 214/****************************************************************************/
 215/* SAS IO Unit Control Request                                              */
 216/****************************************************************************/
 217
 218typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
 219{
 220    U8                      Operation;          /* 00h */
 221    U8                      Reserved1;          /* 01h */
 222    U8                      ChainOffset;        /* 02h */
 223    U8                      Function;           /* 03h */
 224    U16                     DevHandle;          /* 04h */
 225    U8                      IOCParameter;       /* 06h */
 226    U8                      MsgFlags;           /* 07h */
 227    U32                     MsgContext;         /* 08h */
 228    U8                      TargetID;           /* 0Ch */
 229    U8                      Bus;                /* 0Dh */
 230    U8                      PhyNum;             /* 0Eh */
 231    U8                      PrimFlags;          /* 0Fh */
 232    U32                     Primitive;          /* 10h */
 233    U64                     SASAddress;         /* 14h */
 234    U32                     IOCParameterValue;  /* 1Ch */
 235} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
 236  SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
 237
 238/* values for the Operation field */
 239#define MPI_SAS_OP_CLEAR_NOT_PRESENT            (0x01)
 240#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT         (0x02)
 241#define MPI_SAS_OP_PHY_LINK_RESET               (0x06)
 242#define MPI_SAS_OP_PHY_HARD_RESET               (0x07)
 243#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG          (0x08)
 244#define MPI_SAS_OP_MAP_CURRENT                  (0x09)
 245#define MPI_SAS_OP_SEND_PRIMITIVE               (0x0A)
 246#define MPI_SAS_OP_FORCE_FULL_DISCOVERY         (0x0B)
 247#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL  (0x0C)
 248#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE       (0x0D)  /* obsolete name */
 249#define MPI_SAS_OP_REMOVE_DEVICE                (0x0D)
 250#define MPI_SAS_OP_SET_IOC_PARAMETER            (0x0E)
 251#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN         (0x80)
 252
 253/* values for the PrimFlags field */
 254#define MPI_SAS_PRIMFLAGS_SINGLE                (0x08)
 255#define MPI_SAS_PRIMFLAGS_TRIPLE                (0x02)
 256#define MPI_SAS_PRIMFLAGS_REDUNDANT             (0x01)
 257
 258
 259/* SAS IO Unit Control Reply */
 260typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
 261{
 262    U8                      Operation;          /* 00h */
 263    U8                      Reserved1;          /* 01h */
 264    U8                      MsgLength;          /* 02h */
 265    U8                      Function;           /* 03h */
 266    U16                     DevHandle;          /* 04h */
 267    U8                      IOCParameter;       /* 06h */
 268    U8                      MsgFlags;           /* 07h */
 269    U32                     MsgContext;         /* 08h */
 270    U16                     Reserved4;          /* 0Ch */
 271    U16                     IOCStatus;          /* 0Eh */
 272    U32                     IOCLogInfo;         /* 10h */
 273} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
 274  SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
 275
 276#endif
 277
 278
 279