1/* 2 * Copyright (c) 2015 MediaTek Inc. 3 * Author: 4 * Zhigang.Wei <zhigang.wei@mediatek.com> 5 * Chunfeng.Yun <chunfeng.yun@mediatek.com> 6 * 7 * This software is licensed under the terms of the GNU General Public 8 * License version 2, as published by the Free Software Foundation, and 9 * may be copied, distributed, and modified under those terms. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 */ 17 18#ifndef _XHCI_MTK_H_ 19#define _XHCI_MTK_H_ 20 21#include "xhci.h" 22 23/** 24 * To simplify scheduler algorithm, set a upper limit for ESIT, 25 * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, 26 * round down to the limit value, that means allocating more 27 * bandwidth to it. 28 */ 29#define XHCI_MTK_MAX_ESIT 64 30 31/** 32 * struct mu3h_sch_bw_info: schedule information for bandwidth domain 33 * 34 * @bus_bw: array to keep track of bandwidth already used at each uframes 35 * @bw_ep_list: eps in the bandwidth domain 36 * 37 * treat a HS root port as a bandwidth domain, but treat a SS root port as 38 * two bandwidth domains, one for IN eps and another for OUT eps. 39 */ 40struct mu3h_sch_bw_info { 41 u32 bus_bw[XHCI_MTK_MAX_ESIT]; 42 struct list_head bw_ep_list; 43}; 44 45/** 46 * struct mu3h_sch_ep_info: schedule information for endpoint 47 * 48 * @esit: unit is 125us, equal to 2 << Interval field in ep-context 49 * @num_budget_microframes: number of continuous uframes 50 * (@repeat==1) scheduled within the interval 51 * @bw_cost_per_microframe: bandwidth cost per microframe 52 * @endpoint: linked into bandwidth domain which it belongs to 53 * @ep: address of usb_host_endpoint struct 54 * @offset: which uframe of the interval that transfer should be 55 * scheduled first time within the interval 56 * @repeat: the time gap between two uframes that transfers are 57 * scheduled within a interval. in the simple algorithm, only 58 * assign 0 or 1 to it; 0 means using only one uframe in a 59 * interval, and 1 means using @num_budget_microframes 60 * continuous uframes 61 * @pkts: number of packets to be transferred in the scheduled uframes 62 * @cs_count: number of CS that host will trigger 63 * @burst_mode: burst mode for scheduling. 0: normal burst mode, 64 * distribute the bMaxBurst+1 packets for a single burst 65 * according to @pkts and @repeat, repeate the burst multiple 66 * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets 67 * according to @pkts and @repeat. normal mode is used by 68 * default 69 */ 70struct mu3h_sch_ep_info { 71 u32 esit; 72 u32 num_budget_microframes; 73 u32 bw_cost_per_microframe; 74 struct list_head endpoint; 75 void *ep; 76 /* 77 * mtk xHCI scheduling information put into reserved DWs 78 * in ep context 79 */ 80 u32 offset; 81 u32 repeat; 82 u32 pkts; 83 u32 cs_count; 84 u32 burst_mode; 85}; 86 87#define MU3C_U3_PORT_MAX 4 88#define MU3C_U2_PORT_MAX 5 89 90/** 91 * struct mu3c_ippc_regs: MTK ssusb ip port control registers 92 * @ip_pw_ctr0~3: ip power and clock control registers 93 * @ip_pw_sts1~2: ip power and clock status registers 94 * @ip_xhci_cap: ip xHCI capability register 95 * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used 96 * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used 97 * @u2_phy_pll: usb2 phy pll control register 98 */ 99struct mu3c_ippc_regs { 100 __le32 ip_pw_ctr0; 101 __le32 ip_pw_ctr1; 102 __le32 ip_pw_ctr2; 103 __le32 ip_pw_ctr3; 104 __le32 ip_pw_sts1; 105 __le32 ip_pw_sts2; 106 __le32 reserved0[3]; 107 __le32 ip_xhci_cap; 108 __le32 reserved1[2]; 109 __le64 u3_ctrl_p[MU3C_U3_PORT_MAX]; 110 __le64 u2_ctrl_p[MU3C_U2_PORT_MAX]; 111 __le32 reserved2; 112 __le32 u2_phy_pll; 113 __le32 reserved3[33]; /* 0x80 ~ 0xff */ 114}; 115 116struct xhci_hcd_mtk { 117 struct device *dev; 118 struct usb_hcd *hcd; 119 struct mu3h_sch_bw_info *sch_array; 120 struct mu3c_ippc_regs __iomem *ippc_regs; 121 int num_u2_ports; 122 int num_u3_ports; 123 struct regulator *vusb33; 124 struct regulator *vbus; 125 struct clk *sys_clk; /* sys and mac clock */ 126 struct clk *wk_deb_p0; /* port0's wakeup debounce clock */ 127 struct clk *wk_deb_p1; 128 struct regmap *pericfg; 129 struct phy **phys; 130 int num_phys; 131 int wakeup_src; 132 bool lpm_support; 133}; 134 135static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) 136{ 137 return dev_get_drvdata(hcd->self.controller); 138} 139 140#if IS_ENABLED(CONFIG_USB_XHCI_MTK) 141int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk); 142void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk); 143int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, 144 struct usb_host_endpoint *ep); 145void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, 146 struct usb_host_endpoint *ep); 147 148#else 149static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, 150 struct usb_device *udev, struct usb_host_endpoint *ep) 151{ 152 return 0; 153} 154 155static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, 156 struct usb_device *udev, struct usb_host_endpoint *ep) 157{ 158} 159 160#endif 161 162#endif /* _XHCI_MTK_H_ */ 163