/*
 * Copyright 2015 Advanced Micro Devices, Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 *
 */
#include <asm/div64.h>
#include "tonga_thermal.h"
#include "tonga_hwmgr.h"
#include "tonga_smumgr.h"
#include "tonga_ppsmc.h"
#include "smu/smu_7_1_2_d.h"
#include "smu/smu_7_1_2_sh_mask.h"

/**
* Get Fan Speed Control Parameters.
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    pSpeed is the address of the structure where the result is to be placed.
* @exception Always succeeds except if we cannot zero out the output structure.
*/
int tonga_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info)
{

        if (hwmgr->thermal_controller.fanInfo.bNoFan)
                return 0;

        fan_speed_info->supports_percent_read = true;
        fan_speed_info->supports_percent_write = true;
        fan_speed_info->min_percent = 0;
        fan_speed_info->max_percent = 100;

        if (0 != hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) {
                fan_speed_info->supports_rpm_read = true;
                fan_speed_info->supports_rpm_write = true;
                fan_speed_info->min_rpm = hwmgr->thermal_controller.fanInfo.ulMinRPM;
                fan_speed_info->max_rpm = hwmgr->thermal_controller.fanInfo.ulMaxRPM;
        } else {
                fan_speed_info->min_rpm = 0;
                fan_speed_info->max_rpm = 0;
        }

        return 0;
}

/**
* Get Fan Speed in percent.
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    pSpeed is the address of the structure where the result is to be placed.
* @exception Fails is the 100% setting appears to be 0.
*/
int tonga_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t *speed)
{
        uint32_t duty100;
        uint32_t duty;
        uint64_t tmp64;

        if (hwmgr->thermal_controller.fanInfo.bNoFan)
                return 0;

        duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100);
        duty = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_STATUS, FDO_PWM_DUTY);

        if (0 == duty100)
                return -EINVAL;


        tmp64 = (uint64_t)duty * 100;
        do_div(tmp64, duty100);
        *speed = (uint32_t)tmp64;

        if (*speed > 100)
                *speed = 100;

        return 0;
}

/**
* Get Fan Speed in RPM.
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    speed is the address of the structure where the result is to be placed.
* @exception Returns not supported if no fan is found or if pulses per revolution are not set
*/
int tonga_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
{
        return 0;
}

/**
* Set Fan Speed Control to static mode, so that the user can decide what speed to use.
* @param    hwmgr  the address of the powerplay hardware manager.
*           mode    the fan control mode, 0 default, 1 by percent, 5, by RPM
* @exception Should always succeed.
*/
int tonga_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
{

        if (hwmgr->fan_ctrl_is_in_default_mode) {
                hwmgr->fan_ctrl_default_mode = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, FDO_PWM_MODE);
                hwmgr->tmin = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TMIN);
                hwmgr->fan_ctrl_is_in_default_mode = false;
        }

        PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TMIN, 0);
        PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, FDO_PWM_MODE, mode);

        return 0;
}

/**
* Reset Fan Speed Control to default mode.
* @param    hwmgr  the address of the powerplay hardware manager.
* @exception Should always succeed.
*/
int tonga_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
{
        if (!hwmgr->fan_ctrl_is_in_default_mode) {
                PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, FDO_PWM_MODE, hwmgr->fan_ctrl_default_mode);
                PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TMIN, hwmgr->tmin);
                hwmgr->fan_ctrl_is_in_default_mode = true;
        }

        return 0;
}

int tonga_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
{
        int result;

        if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ODFuzzyFanControlSupport)) {
                cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_FUZZY);
                result = (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl) == 0) ?  0 : -EINVAL;
/*
                if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_FanSpeedInTableIsRPM))
                        hwmgr->set_max_fan_rpm_output(hwmgr, hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanRPM);
                else
                        hwmgr->set_max_fan_pwm_output(hwmgr, hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanPWM);
*/
        } else {
                cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_TABLE);
                result = (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl) == 0) ?  0 : -EINVAL;
        }
/* TO DO FOR SOME DEVICE ID 0X692b, send this msg return invalid command.
        if (result == 0 && hwmgr->thermal_controller.advanceFanControlParameters.ucTargetTemperature != 0)
                result = (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanTemperatureTarget, \
                                                                hwmgr->thermal_controller.advanceFanControlParameters.ucTargetTemperature) ? 0 : -EINVAL);
*/
        return result;
}


int tonga_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
{
        return (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StopFanControl) == 0) ?  0 : -EINVAL;
}

/**
* Set Fan Speed in percent.
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    speed is the percentage value (0% - 100%) to be set.
* @exception Fails is the 100% setting appears to be 0.
*/
int tonga_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t speed)
{
        uint32_t duty100;
        uint32_t duty;
        uint64_t tmp64;

        if (hwmgr->thermal_controller.fanInfo.bNoFan)
                return -EINVAL;

        if (speed > 100)
                speed = 100;

        if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl))
                tonga_fan_ctrl_stop_smc_fan_control(hwmgr);

        duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100);

        if (0 == duty100)
                return -EINVAL;

        tmp64 = (uint64_t)speed * duty100;
        do_div(tmp64, 100);
        duty = (uint32_t)tmp64;

        PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL0, FDO_STATIC_DUTY, duty);

        return tonga_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
}

/**
* Reset Fan Speed to default.
* @param    hwmgr  the address of the powerplay hardware manager.
* @exception Always succeeds.
*/
int tonga_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
{
        int result;

        if (hwmgr->thermal_controller.fanInfo.bNoFan)
                return 0;

        if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl)) {
                result = tonga_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
                if (0 == result)
                        result = tonga_fan_ctrl_start_smc_fan_control(hwmgr);
        } else
                result = tonga_fan_ctrl_set_default_mode(hwmgr);

        return result;
}

/**
* Set Fan Speed in RPM.
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    speed is the percentage value (min - max) to be set.
* @exception Fails is the speed not lie between min and max.
*/
int tonga_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
{
        return 0;
}

/**
* Reads the remote temperature from the SIslands thermal controller.
*
* @param    hwmgr The address of the hardware manager.
*/
int tonga_thermal_get_temperature(struct pp_hwmgr *hwmgr)
{
        int temp;

        temp = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_MULT_THERMAL_STATUS, CTF_TEMP);

/* Bit 9 means the reading is lower than the lowest usable value. */
        if (0 != (0x200 & temp))
                temp = TONGA_THERMAL_MAXIMUM_TEMP_READING;
        else
                temp = (temp & 0x1ff);

        temp = temp * PP_TEMPERATURE_UNITS_PER_CENTIGRADES;

        return temp;
}

/**
* Set the requested temperature range for high and low alert signals
*
* @param    hwmgr The address of the hardware manager.
* @param    range Temperature range to be programmed for high and low alert signals
* @exception PP_Result_BadInput if the input data is not valid.
*/
static int tonga_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, uint32_t low_temp, uint32_t high_temp)
{
        uint32_t low = TONGA_THERMAL_MINIMUM_ALERT_TEMP * PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
        uint32_t high = TONGA_THERMAL_MAXIMUM_ALERT_TEMP * PP_TEMPERATURE_UNITS_PER_CENTIGRADES;

        if (low < low_temp)
                low = low_temp;
        if (high > high_temp)
                high = high_temp;

        if (low > high)
                return -EINVAL;

        PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, DIG_THERM_INTH, (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
        PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, DIG_THERM_INTL, (low / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
        PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_CTRL, DIG_THERM_DPM, (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));

        return 0;
}

/**
* Programs thermal controller one-time setting registers
*
* @param    hwmgr The address of the hardware manager.
*/
static int tonga_thermal_initialize(struct pp_hwmgr *hwmgr)
{
        if (0 != hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
                PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
                                                CG_TACH_CTRL, EDGE_PER_REV,
                                                hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution - 1);

        PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TACH_PWM_RESP_RATE, 0x28);

        return 0;
}

/**
* Enable thermal alerts on the RV770 thermal controller.
*
* @param    hwmgr The address of the hardware manager.
*/
static int tonga_thermal_enable_alert(struct pp_hwmgr *hwmgr)
{
        uint32_t alert;

        alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK);
        alert &= ~(TONGA_THERMAL_HIGH_ALERT_MASK | TONGA_THERMAL_LOW_ALERT_MASK);
        PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK, alert);

        /* send message to SMU to enable internal thermal interrupts */
        return (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Enable) == 0) ? 0 : -1;
}

/**
* Disable thermal alerts on the RV770 thermal controller.
* @param    hwmgr The address of the hardware manager.
*/
static int tonga_thermal_disable_alert(struct pp_hwmgr *hwmgr)
{
        uint32_t alert;

        alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK);
        alert |= (TONGA_THERMAL_HIGH_ALERT_MASK | TONGA_THERMAL_LOW_ALERT_MASK);
        PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK, alert);

        /* send message to SMU to disable internal thermal interrupts */
        return (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Disable) == 0) ? 0 : -1;
}

/**
* Uninitialize the thermal controller.
* Currently just disables alerts.
* @param    hwmgr The address of the hardware manager.
*/
int tonga_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
{
        int result = tonga_thermal_disable_alert(hwmgr);

        if (hwmgr->thermal_controller.fanInfo.bNoFan)
                tonga_fan_ctrl_set_default_mode(hwmgr);

        return result;
}

/**
* Set up the fan table to control the fan using the SMC.
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    pInput the pointer to input data
* @param    pOutput the pointer to output data
* @param    pStorage the pointer to temporary storage
* @param    Result the last failure code
* @return   result from set temperature range routine
*/
int tf_tonga_thermal_setup_fan_table(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
{
        struct tonga_hwmgr *data = (struct tonga_hwmgr *)(hwmgr->backend);
        SMU72_Discrete_FanTable fan_table = { FDO_MODE_HARDWARE };
        uint32_t duty100;
        uint32_t t_diff1, t_diff2, pwm_diff1, pwm_diff2;
        uint16_t fdo_min, slope1, slope2;
        uint32_t reference_clock;
        int res;
        uint64_t tmp64;

        if (!phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl))
                return 0;

        if (0 == data->fan_table_start) {
                phm_cap_unset(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl);
                return 0;
        }

        duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100);

        if (0 == duty100) {
                phm_cap_unset(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl);
                return 0;
        }

        tmp64 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin * duty100;
        do_div(tmp64, 10000);
        fdo_min = (uint16_t)tmp64;

        t_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usTMed - hwmgr->thermal_controller.advanceFanControlParameters.usTMin;
        t_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usTHigh - hwmgr->thermal_controller.advanceFanControlParameters.usTMed;

        pwm_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed - hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin;
        pwm_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMHigh - hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed;

        slope1 = (uint16_t)((50 + ((16 * duty100 * pwm_diff1) / t_diff1)) / 100);
        slope2 = (uint16_t)((50 + ((16 * duty100 * pwm_diff2) / t_diff2)) / 100);

        fan_table.TempMin = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMin) / 100);
        fan_table.TempMed = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMed) / 100);
        fan_table.TempMax = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMax) / 100);

        fan_table.Slope1 = cpu_to_be16(slope1);
        fan_table.Slope2 = cpu_to_be16(slope2);

        fan_table.FdoMin = cpu_to_be16(fdo_min);

        fan_table.HystDown = cpu_to_be16(hwmgr->thermal_controller.advanceFanControlParameters.ucTHyst);

        fan_table.HystUp = cpu_to_be16(1);

        fan_table.HystSlope = cpu_to_be16(1);

        fan_table.TempRespLim = cpu_to_be16(5);

        reference_clock = tonga_get_xclk(hwmgr);

        fan_table.RefreshPeriod = cpu_to_be32((hwmgr->thermal_controller.advanceFanControlParameters.ulCycleDelay * reference_clock) / 1600);

        fan_table.FdoMax = cpu_to_be16((uint16_t)duty100);

        fan_table.TempSrc = (uint8_t)PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_MULT_THERMAL_CTRL, TEMP_SEL);

        fan_table.FanControl_GL_Flag = 1;

        res = tonga_copy_bytes_to_smc(hwmgr->smumgr, data->fan_table_start, (uint8_t *)&fan_table, (uint32_t)sizeof(fan_table), data->sram_end);
/* TO DO FOR SOME DEVICE ID 0X692b, send this msg return invalid command.
        if (res == 0 && hwmgr->thermal_controller.advanceFanControlParameters.ucMinimumPWMLimit != 0)
                res = (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanMinPwm, \
                                                hwmgr->thermal_controller.advanceFanControlParameters.ucMinimumPWMLimit) ? 0 : -1);

        if (res == 0 && hwmgr->thermal_controller.advanceFanControlParameters.ulMinFanSCLKAcousticLimit != 0)
                res = (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanSclkTarget, \
                                        hwmgr->thermal_controller.advanceFanControlParameters.ulMinFanSCLKAcousticLimit) ? 0 : -1);

        if (0 != res)
                phm_cap_unset(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl);
*/
        return 0;
}

/**
* Start the fan control on the SMC.
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    pInput the pointer to input data
* @param    pOutput the pointer to output data
* @param    pStorage the pointer to temporary storage
* @param    Result the last failure code
* @return   result from set temperature range routine
*/
int tf_tonga_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
{
/* If the fantable setup has failed we could have disabled PHM_PlatformCaps_MicrocodeFanControl even after this function was included in the table.
 * Make sure that we still think controlling the fan is OK.
*/
        if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl)) {
                tonga_fan_ctrl_start_smc_fan_control(hwmgr);
                tonga_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
        }

        return 0;
}

/**
* Set temperature range for high and low alerts
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    pInput the pointer to input data
* @param    pOutput the pointer to output data
* @param    pStorage the pointer to temporary storage
* @param    Result the last failure code
* @return   result from set temperature range routine
*/
int tf_tonga_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
{
        struct PP_TemperatureRange *range = (struct PP_TemperatureRange *)input;

        if (range == NULL)
                return -EINVAL;

        return tonga_thermal_set_temperature_range(hwmgr, range->min, range->max);
}

/**
* Programs one-time setting registers
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    pInput the pointer to input data
* @param    pOutput the pointer to output data
* @param    pStorage the pointer to temporary storage
* @param    Result the last failure code
* @return   result from initialize thermal controller routine
*/
int tf_tonga_thermal_initialize(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
{
    return tonga_thermal_initialize(hwmgr);
}

/**
* Enable high and low alerts
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    pInput the pointer to input data
* @param    pOutput the pointer to output data
* @param    pStorage the pointer to temporary storage
* @param    Result the last failure code
* @return   result from enable alert routine
*/
int tf_tonga_thermal_enable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
{
        return tonga_thermal_enable_alert(hwmgr);
}

/**
* Disable high and low alerts
* @param    hwmgr  the address of the powerplay hardware manager.
* @param    pInput the pointer to input data
* @param    pOutput the pointer to output data
* @param    pStorage the pointer to temporary storage
* @param    Result the last failure code
* @return   result from disable alert routine
*/
static int tf_tonga_thermal_disable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
{
        return tonga_thermal_disable_alert(hwmgr);
}

static const struct phm_master_table_item tonga_thermal_start_thermal_controller_master_list[] = {
        { NULL, tf_tonga_thermal_initialize },
        { NULL, tf_tonga_thermal_set_temperature_range },
        { NULL, tf_tonga_thermal_enable_alert },
/* We should restrict performance levels to low before we halt the SMC.
 * On the other hand we are still in boot state when we do this so it would be pointless.
 * If this assumption changes we have to revisit this table.
 */
        { NULL, tf_tonga_thermal_setup_fan_table},
        { NULL, tf_tonga_thermal_start_smc_fan_control},
        { NULL, NULL }
};

static const struct phm_master_table_header tonga_thermal_start_thermal_controller_master = {
        0,
        PHM_MasterTableFlag_None,
        tonga_thermal_start_thermal_controller_master_list
};

static const struct phm_master_table_item tonga_thermal_set_temperature_range_master_list[] = {
        { NULL, tf_tonga_thermal_disable_alert},
        { NULL, tf_tonga_thermal_set_temperature_range},
        { NULL, tf_tonga_thermal_enable_alert},
        { NULL, NULL }
};

static const struct phm_master_table_header tonga_thermal_set_temperature_range_master = {
        0,
        PHM_MasterTableFlag_None,
        tonga_thermal_set_temperature_range_master_list
};

int tonga_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr)
{
        if (!hwmgr->thermal_controller.fanInfo.bNoFan)
                tonga_fan_ctrl_set_default_mode(hwmgr);
        return 0;
}

/**
* Initializes the thermal controller related functions in the Hardware Manager structure.
* @param    hwmgr The address of the hardware manager.
* @exception Any error code from the low-level communication.
*/
int pp_tonga_thermal_initialize(struct pp_hwmgr *hwmgr)
{
        int result;

        result = phm_construct_table(hwmgr, &tonga_thermal_set_temperature_range_master, &(hwmgr->set_temperature_range));

        if (0 == result) {
                result = phm_construct_table(hwmgr,
                                                &tonga_thermal_start_thermal_controller_master,
                                                &(hwmgr->start_thermal_controller));
                if (0 != result)
                        phm_destroy_table(hwmgr, &(hwmgr->set_temperature_range));
        }

        if (0 == result)
                hwmgr->fan_ctrl_is_in_default_mode = true;
        return result;
}