linux/drivers/misc/mei/hw.h
<<
>>
Prefs
   1/*
   2 *
   3 * Intel Management Engine Interface (Intel MEI) Linux driver
   4 * Copyright (c) 2003-2012, Intel Corporation.
   5 *
   6 * This program is free software; you can redistribute it and/or modify it
   7 * under the terms and conditions of the GNU General Public License,
   8 * version 2, as published by the Free Software Foundation.
   9 *
  10 * This program is distributed in the hope it will be useful, but WITHOUT
  11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13 * more details.
  14 *
  15 */
  16
  17#ifndef _MEI_HW_TYPES_H_
  18#define _MEI_HW_TYPES_H_
  19
  20#include <linux/uuid.h>
  21
  22/*
  23 * Timeouts in Seconds
  24 */
  25#define MEI_HW_READY_TIMEOUT        2  /* Timeout on ready message */
  26#define MEI_CONNECT_TIMEOUT         3  /* HPS: at least 2 seconds */
  27
  28#define MEI_CL_CONNECT_TIMEOUT     15  /* HPS: Client Connect Timeout */
  29#define MEI_CLIENTS_INIT_TIMEOUT   15  /* HPS: Clients Enumeration Timeout */
  30
  31#define MEI_IAMTHIF_STALL_TIMER    12  /* HPS */
  32
  33#define MEI_PGI_TIMEOUT             1  /* PG Isolation time response 1 sec */
  34#define MEI_D0I3_TIMEOUT            5  /* D0i3 set/unset max response time */
  35#define MEI_HBM_TIMEOUT             1  /* 1 second */
  36
  37/*
  38 * MEI Version
  39 */
  40#define HBM_MINOR_VERSION                   0
  41#define HBM_MAJOR_VERSION                   2
  42
  43/*
  44 * MEI version with PGI support
  45 */
  46#define HBM_MINOR_VERSION_PGI               1
  47#define HBM_MAJOR_VERSION_PGI               1
  48
  49/*
  50 * MEI version with Dynamic clients support
  51 */
  52#define HBM_MINOR_VERSION_DC               0
  53#define HBM_MAJOR_VERSION_DC               2
  54
  55/*
  56 * MEI version with immediate reply to enum request support
  57 */
  58#define HBM_MINOR_VERSION_IE               0
  59#define HBM_MAJOR_VERSION_IE               2
  60
  61/*
  62 * MEI version with disconnect on connection timeout support
  63 */
  64#define HBM_MINOR_VERSION_DOT              0
  65#define HBM_MAJOR_VERSION_DOT              2
  66
  67/*
  68 * MEI version with notifcation support
  69 */
  70#define HBM_MINOR_VERSION_EV               0
  71#define HBM_MAJOR_VERSION_EV               2
  72
  73/*
  74 * MEI version with fixed address client support
  75 */
  76#define HBM_MINOR_VERSION_FA               0
  77#define HBM_MAJOR_VERSION_FA               2
  78
  79/* Host bus message command opcode */
  80#define MEI_HBM_CMD_OP_MSK                  0x7f
  81/* Host bus message command RESPONSE */
  82#define MEI_HBM_CMD_RES_MSK                 0x80
  83
  84/*
  85 * MEI Bus Message Command IDs
  86 */
  87#define HOST_START_REQ_CMD                  0x01
  88#define HOST_START_RES_CMD                  0x81
  89
  90#define HOST_STOP_REQ_CMD                   0x02
  91#define HOST_STOP_RES_CMD                   0x82
  92
  93#define ME_STOP_REQ_CMD                     0x03
  94
  95#define HOST_ENUM_REQ_CMD                   0x04
  96#define HOST_ENUM_RES_CMD                   0x84
  97
  98#define HOST_CLIENT_PROPERTIES_REQ_CMD      0x05
  99#define HOST_CLIENT_PROPERTIES_RES_CMD      0x85
 100
 101#define CLIENT_CONNECT_REQ_CMD              0x06
 102#define CLIENT_CONNECT_RES_CMD              0x86
 103
 104#define CLIENT_DISCONNECT_REQ_CMD           0x07
 105#define CLIENT_DISCONNECT_RES_CMD           0x87
 106
 107#define MEI_FLOW_CONTROL_CMD                0x08
 108
 109#define MEI_PG_ISOLATION_ENTRY_REQ_CMD      0x0a
 110#define MEI_PG_ISOLATION_ENTRY_RES_CMD      0x8a
 111#define MEI_PG_ISOLATION_EXIT_REQ_CMD       0x0b
 112#define MEI_PG_ISOLATION_EXIT_RES_CMD       0x8b
 113
 114#define MEI_HBM_ADD_CLIENT_REQ_CMD          0x0f
 115#define MEI_HBM_ADD_CLIENT_RES_CMD          0x8f
 116
 117#define MEI_HBM_NOTIFY_REQ_CMD              0x10
 118#define MEI_HBM_NOTIFY_RES_CMD              0x90
 119#define MEI_HBM_NOTIFICATION_CMD            0x11
 120
 121/*
 122 * MEI Stop Reason
 123 * used by hbm_host_stop_request.reason
 124 */
 125enum mei_stop_reason_types {
 126        DRIVER_STOP_REQUEST = 0x00,
 127        DEVICE_D1_ENTRY = 0x01,
 128        DEVICE_D2_ENTRY = 0x02,
 129        DEVICE_D3_ENTRY = 0x03,
 130        SYSTEM_S1_ENTRY = 0x04,
 131        SYSTEM_S2_ENTRY = 0x05,
 132        SYSTEM_S3_ENTRY = 0x06,
 133        SYSTEM_S4_ENTRY = 0x07,
 134        SYSTEM_S5_ENTRY = 0x08
 135};
 136
 137
 138/**
 139 * enum mei_hbm_status  - mei host bus messages return values
 140 *
 141 * @MEI_HBMS_SUCCESS           : status success
 142 * @MEI_HBMS_CLIENT_NOT_FOUND  : client not found
 143 * @MEI_HBMS_ALREADY_EXISTS    : connection already established
 144 * @MEI_HBMS_REJECTED          : connection is rejected
 145 * @MEI_HBMS_INVALID_PARAMETER : invalid parameter
 146 * @MEI_HBMS_NOT_ALLOWED       : operation not allowed
 147 * @MEI_HBMS_ALREADY_STARTED   : system is already started
 148 * @MEI_HBMS_NOT_STARTED       : system not started
 149 *
 150 * @MEI_HBMS_MAX               : sentinel
 151 */
 152enum mei_hbm_status {
 153        MEI_HBMS_SUCCESS           = 0,
 154        MEI_HBMS_CLIENT_NOT_FOUND  = 1,
 155        MEI_HBMS_ALREADY_EXISTS    = 2,
 156        MEI_HBMS_REJECTED          = 3,
 157        MEI_HBMS_INVALID_PARAMETER = 4,
 158        MEI_HBMS_NOT_ALLOWED       = 5,
 159        MEI_HBMS_ALREADY_STARTED   = 6,
 160        MEI_HBMS_NOT_STARTED       = 7,
 161
 162        MEI_HBMS_MAX
 163};
 164
 165
 166/*
 167 * Client Connect Status
 168 * used by hbm_client_connect_response.status
 169 */
 170enum mei_cl_connect_status {
 171        MEI_CL_CONN_SUCCESS          = MEI_HBMS_SUCCESS,
 172        MEI_CL_CONN_NOT_FOUND        = MEI_HBMS_CLIENT_NOT_FOUND,
 173        MEI_CL_CONN_ALREADY_STARTED  = MEI_HBMS_ALREADY_EXISTS,
 174        MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED,
 175        MEI_CL_CONN_MESSAGE_SMALL    = MEI_HBMS_INVALID_PARAMETER,
 176        MEI_CL_CONN_NOT_ALLOWED      = MEI_HBMS_NOT_ALLOWED,
 177};
 178
 179/*
 180 * Client Disconnect Status
 181 */
 182enum  mei_cl_disconnect_status {
 183        MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS
 184};
 185
 186/*
 187 *  MEI BUS Interface Section
 188 */
 189struct mei_msg_hdr {
 190        u32 me_addr:8;
 191        u32 host_addr:8;
 192        u32 length:9;
 193        u32 reserved:5;
 194        u32 internal:1;
 195        u32 msg_complete:1;
 196} __packed;
 197
 198
 199struct mei_bus_message {
 200        u8 hbm_cmd;
 201        u8 data[0];
 202} __packed;
 203
 204/**
 205 * struct hbm_cl_cmd - client specific host bus command
 206 *      CONNECT, DISCONNECT, and FlOW CONTROL
 207 *
 208 * @hbm_cmd: bus message command header
 209 * @me_addr: address of the client in ME
 210 * @host_addr: address of the client in the driver
 211 * @data: generic data
 212 */
 213struct mei_hbm_cl_cmd {
 214        u8 hbm_cmd;
 215        u8 me_addr;
 216        u8 host_addr;
 217        u8 data;
 218};
 219
 220struct hbm_version {
 221        u8 minor_version;
 222        u8 major_version;
 223} __packed;
 224
 225struct hbm_host_version_request {
 226        u8 hbm_cmd;
 227        u8 reserved;
 228        struct hbm_version host_version;
 229} __packed;
 230
 231struct hbm_host_version_response {
 232        u8 hbm_cmd;
 233        u8 host_version_supported;
 234        struct hbm_version me_max_version;
 235} __packed;
 236
 237struct hbm_host_stop_request {
 238        u8 hbm_cmd;
 239        u8 reason;
 240        u8 reserved[2];
 241} __packed;
 242
 243struct hbm_host_stop_response {
 244        u8 hbm_cmd;
 245        u8 reserved[3];
 246} __packed;
 247
 248struct hbm_me_stop_request {
 249        u8 hbm_cmd;
 250        u8 reason;
 251        u8 reserved[2];
 252} __packed;
 253
 254/**
 255 * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0)
 256 *
 257 * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add
 258 * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately
 259 */
 260enum hbm_host_enum_flags {
 261        MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0),
 262        MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1),
 263};
 264
 265/**
 266 * struct hbm_host_enum_request - enumeration request from host to fw
 267 *
 268 * @hbm_cmd : bus message command header
 269 * @flags   : request flags
 270 * @reserved: reserved
 271 */
 272struct hbm_host_enum_request {
 273        u8 hbm_cmd;
 274        u8 flags;
 275        u8 reserved[2];
 276} __packed;
 277
 278struct hbm_host_enum_response {
 279        u8 hbm_cmd;
 280        u8 reserved[3];
 281        u8 valid_addresses[32];
 282} __packed;
 283
 284struct mei_client_properties {
 285        uuid_le protocol_name;
 286        u8 protocol_version;
 287        u8 max_number_of_connections;
 288        u8 fixed_address;
 289        u8 single_recv_buf;
 290        u32 max_msg_length;
 291} __packed;
 292
 293struct hbm_props_request {
 294        u8 hbm_cmd;
 295        u8 me_addr;
 296        u8 reserved[2];
 297} __packed;
 298
 299struct hbm_props_response {
 300        u8 hbm_cmd;
 301        u8 me_addr;
 302        u8 status;
 303        u8 reserved[1];
 304        struct mei_client_properties client_properties;
 305} __packed;
 306
 307/**
 308 * struct hbm_add_client_request - request to add a client
 309 *     might be sent by fw after enumeration has already completed
 310 *
 311 * @hbm_cmd: bus message command header
 312 * @me_addr: address of the client in ME
 313 * @reserved: reserved
 314 * @client_properties: client properties
 315 */
 316struct hbm_add_client_request {
 317        u8 hbm_cmd;
 318        u8 me_addr;
 319        u8 reserved[2];
 320        struct mei_client_properties client_properties;
 321} __packed;
 322
 323/**
 324 * struct hbm_add_client_response - response to add a client
 325 *     sent by the host to report client addition status to fw
 326 *
 327 * @hbm_cmd: bus message command header
 328 * @me_addr: address of the client in ME
 329 * @status: if HBMS_SUCCESS then the client can now accept connections.
 330 * @reserved: reserved
 331 */
 332struct hbm_add_client_response {
 333        u8 hbm_cmd;
 334        u8 me_addr;
 335        u8 status;
 336        u8 reserved[1];
 337} __packed;
 338
 339/**
 340 * struct hbm_power_gate - power gate request/response
 341 *
 342 * @hbm_cmd: bus message command header
 343 * @reserved: reserved
 344 */
 345struct hbm_power_gate {
 346        u8 hbm_cmd;
 347        u8 reserved[3];
 348} __packed;
 349
 350/**
 351 * struct hbm_client_connect_request - connect/disconnect request
 352 *
 353 * @hbm_cmd: bus message command header
 354 * @me_addr: address of the client in ME
 355 * @host_addr: address of the client in the driver
 356 * @reserved: reserved
 357 */
 358struct hbm_client_connect_request {
 359        u8 hbm_cmd;
 360        u8 me_addr;
 361        u8 host_addr;
 362        u8 reserved;
 363} __packed;
 364
 365/**
 366 * struct hbm_client_connect_response - connect/disconnect response
 367 *
 368 * @hbm_cmd: bus message command header
 369 * @me_addr: address of the client in ME
 370 * @host_addr: address of the client in the driver
 371 * @status: status of the request
 372 */
 373struct hbm_client_connect_response {
 374        u8 hbm_cmd;
 375        u8 me_addr;
 376        u8 host_addr;
 377        u8 status;
 378} __packed;
 379
 380
 381#define MEI_FC_MESSAGE_RESERVED_LENGTH           5
 382
 383struct hbm_flow_control {
 384        u8 hbm_cmd;
 385        u8 me_addr;
 386        u8 host_addr;
 387        u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
 388} __packed;
 389
 390#define MEI_HBM_NOTIFICATION_START 1
 391#define MEI_HBM_NOTIFICATION_STOP  0
 392/**
 393 * struct hbm_notification_request - start/stop notification request
 394 *
 395 * @hbm_cmd: bus message command header
 396 * @me_addr: address of the client in ME
 397 * @host_addr: address of the client in the driver
 398 * @start:  start = 1 or stop = 0 asynchronous notifications
 399 */
 400struct hbm_notification_request {
 401        u8 hbm_cmd;
 402        u8 me_addr;
 403        u8 host_addr;
 404        u8 start;
 405} __packed;
 406
 407/**
 408 * struct hbm_notification_response - start/stop notification response
 409 *
 410 * @hbm_cmd: bus message command header
 411 * @me_addr: address of the client in ME
 412 * @host_addr: - address of the client in the driver
 413 * @status: (mei_hbm_status) response status for the request
 414 *  - MEI_HBMS_SUCCESS: successful stop/start
 415 *  - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
 416 *  - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
 417 *                         started notification.
 418 *  - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
 419 *                         asynchronous notifications are currently disabled.
 420 *
 421 * @start:  start = 1 or stop = 0 asynchronous notifications
 422 * @reserved: reserved
 423 */
 424struct hbm_notification_response {
 425        u8 hbm_cmd;
 426        u8 me_addr;
 427        u8 host_addr;
 428        u8 status;
 429        u8 start;
 430        u8 reserved[3];
 431} __packed;
 432
 433/**
 434 * struct hbm_notification - notification event
 435 *
 436 * @hbm_cmd: bus message command header
 437 * @me_addr:  address of the client in ME
 438 * @host_addr:  address of the client in the driver
 439 * @reserved: reserved for alignment
 440 */
 441struct hbm_notification {
 442        u8 hbm_cmd;
 443        u8 me_addr;
 444        u8 host_addr;
 445        u8 reserved[1];
 446} __packed;
 447
 448#endif
 449