LXR linux/drivers/net/arcnet/com90io.c

   1/*
   2 * Linux ARCnet driver - COM90xx chipset (IO-mapped buffers)
   3 *
   4 * Written 1997 by David Woodhouse.
   5 * Written 1994-1999 by Avery Pennarun.
   6 * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
   7 * Derived from skeleton.c by Donald Becker.
   8 *
   9 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
  10 *  for sponsoring the further development of this driver.
  11 *
  12 * **********************
  13 *
  14 * The original copyright of skeleton.c was as follows:
  15 *
  16 * skeleton.c Written 1993 by Donald Becker.
  17 * Copyright 1993 United States Government as represented by the
  18 * Director, National Security Agency.  This software may only be used
  19 * and distributed according to the terms of the GNU General Public License as
  20 * modified by SRC, incorporated herein by reference.
  21 *
  22 * **********************
  23 *
  24 * For more details, see drivers/net/arcnet.c
  25 *
  26 * **********************
  27 */
  28
  29#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
  30
  31#include <linux/kernel.h>
  32#include <linux/module.h>
  33#include <linux/moduleparam.h>
  34#include <linux/ioport.h>
  35#include <linux/delay.h>
  36#include <linux/netdevice.h>
  37#include <linux/bootmem.h>
  38#include <linux/init.h>
  39#include <linux/interrupt.h>
  40#include <linux/io.h>
  41
  42#include "arcdevice.h"
  43#include "com9026.h"
  44
  45/* Internal function declarations */
  46
  47static int com90io_found(struct net_device *dev);
  48static void com90io_command(struct net_device *dev, int command);
  49static int com90io_status(struct net_device *dev);
  50static void com90io_setmask(struct net_device *dev, int mask);
  51static int com90io_reset(struct net_device *dev, int really_reset);
  52static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset,
  53                                 void *buf, int count);
  54static void com90io_copy_from_card(struct net_device *dev, int bufnum,
  55                                   int offset, void *buf, int count);
  56
  57/* Handy defines for ARCnet specific stuff */
  58
  59/* The number of low I/O ports used by the card. */
  60#define ARCNET_TOTAL_SIZE 16
  61
  62/****************************************************************************
  63 *                                                                          *
  64 * IO-mapped operation routines                                             *
  65 *                                                                          *
  66 ****************************************************************************/
  67
  68#undef ONE_AT_A_TIME_TX
  69#undef ONE_AT_A_TIME_RX
  70
  71static u_char get_buffer_byte(struct net_device *dev, unsigned offset)
  72{
  73        int ioaddr = dev->base_addr;
  74
  75        arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
  76        arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
  77
  78        return arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
  79}
  80
  81#ifdef ONE_AT_A_TIME_TX
  82static void put_buffer_byte(struct net_device *dev, unsigned offset,
  83                            u_char datum)
  84{
  85        int ioaddr = dev->base_addr;
  86
  87        arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
  88        arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
  89
  90        arcnet_outb(datum, ioaddr, COM9026_REG_RW_MEMDATA);
  91}
  92
  93#endif
  94
  95static void get_whole_buffer(struct net_device *dev, unsigned offset,
  96                             unsigned length, char *dest)
  97{
  98        int ioaddr = dev->base_addr;
  99
 100        arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
 101        arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
 102
 103        while (length--)
 104#ifdef ONE_AT_A_TIME_RX
 105                *(dest++) = get_buffer_byte(dev, offset++);
 106#else
 107                *(dest++) = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
 108#endif
 109}
 110
 111static void put_whole_buffer(struct net_device *dev, unsigned offset,
 112                             unsigned length, char *dest)
 113{
 114        int ioaddr = dev->base_addr;
 115
 116        arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
 117        arcnet_outb(offset & 0xff, ioaddr,COM9026_REG_W_ADDR_LO);
 118
 119        while (length--)
 120#ifdef ONE_AT_A_TIME_TX
 121                put_buffer_byte(dev, offset++, *(dest++));
 122#else
 123                arcnet_outb(*(dest++), ioaddr, COM9026_REG_RW_MEMDATA);
 124#endif
 125}
 126
 127/* We cannot probe for an IO mapped card either, although we can check that
 128 * it's where we were told it was, and even autoirq
 129 */
 130static int __init com90io_probe(struct net_device *dev)
 131{
 132        int ioaddr = dev->base_addr, status;
 133        unsigned long airqmask;
 134
 135        if (BUGLVL(D_NORMAL)) {
 136                pr_info("%s\n", "COM90xx IO-mapped mode support (by David Woodhouse et el.)");
 137                pr_info("E-mail me if you actually test this driver, please!\n");
 138        }
 139
 140        if (!ioaddr) {
 141                arc_printk(D_NORMAL, dev, "No autoprobe for IO mapped cards; you must specify the base address!\n");
 142                return -ENODEV;
 143        }
 144        if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com90io probe")) {
 145                arc_printk(D_INIT_REASONS, dev, "IO request_region %x-%x failed\n",
 146                           ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
 147                return -ENXIO;
 148        }
 149        if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) {
 150                arc_printk(D_INIT_REASONS, dev, "IO address %x empty\n",
 151                           ioaddr);
 152                goto err_out;
 153        }
 154        arcnet_inb(ioaddr, COM9026_REG_R_RESET);
 155        mdelay(RESETtime);
 156
 157        status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 158
 159        if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
 160                arc_printk(D_INIT_REASONS, dev, "Status invalid (%Xh)\n",
 161                           status);
 162                goto err_out;
 163        }
 164        arc_printk(D_INIT_REASONS, dev, "Status after reset: %X\n", status);
 165
 166        arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
 167                    ioaddr, COM9026_REG_W_COMMAND);
 168
 169        arc_printk(D_INIT_REASONS, dev, "Status after reset acknowledged: %X\n",
 170                   status);
 171
 172        status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 173
 174        if (status & RESETflag) {
 175                arc_printk(D_INIT_REASONS, dev, "Eternal reset (status=%Xh)\n",
 176                           status);
 177                goto err_out;
 178        }
 179        arcnet_outb((0x16 | IOMAPflag) & ~ENABLE16flag,
 180                    ioaddr, COM9026_REG_RW_CONFIG);
 181
 182        /* Read first loc'n of memory */
 183
 184        arcnet_outb(AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
 185        arcnet_outb(0, ioaddr,  COM9026_REG_W_ADDR_LO);
 186
 187        status = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
 188        if (status != 0xd1) {
 189                arc_printk(D_INIT_REASONS, dev, "Signature byte not found (%Xh instead).\n",
 190                           status);
 191                goto err_out;
 192        }
 193        if (!dev->irq) {
 194                /* if we do this, we're sure to get an IRQ since the
 195                 * card has just reset and the NORXflag is on until
 196                 * we tell it to start receiving.
 197                 */
 198
 199                airqmask = probe_irq_on();
 200                arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK);
 201                udelay(1);
 202                arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK);
 203                dev->irq = probe_irq_off(airqmask);
 204
 205                if ((int)dev->irq <= 0) {
 206                        arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed\n");
 207                        goto err_out;
 208                }
 209        }
 210        release_region(ioaddr, ARCNET_TOTAL_SIZE); /* end of probing */
 211        return com90io_found(dev);
 212
 213err_out:
 214        release_region(ioaddr, ARCNET_TOTAL_SIZE);
 215        return -ENODEV;
 216}
 217
 218/* Set up the struct net_device associated with this card.  Called after
 219 * probing succeeds.
 220 */
 221static int __init com90io_found(struct net_device *dev)
 222{
 223        struct arcnet_local *lp;
 224        int ioaddr = dev->base_addr;
 225        int err;
 226
 227        /* Reserve the irq */
 228        if (request_irq(dev->irq, arcnet_interrupt, 0,
 229                        "arcnet (COM90xx-IO)", dev)) {
 230                arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
 231                return -ENODEV;
 232        }
 233        /* Reserve the I/O region */
 234        if (!request_region(dev->base_addr, ARCNET_TOTAL_SIZE,
 235                            "arcnet (COM90xx-IO)")) {
 236                free_irq(dev->irq, dev);
 237                return -EBUSY;
 238        }
 239
 240        lp = netdev_priv(dev);
 241        lp->card_name = "COM90xx I/O";
 242        lp->hw.command = com90io_command;
 243        lp->hw.status = com90io_status;
 244        lp->hw.intmask = com90io_setmask;
 245        lp->hw.reset = com90io_reset;
 246        lp->hw.owner = THIS_MODULE;
 247        lp->hw.copy_to_card = com90io_copy_to_card;
 248        lp->hw.copy_from_card = com90io_copy_from_card;
 249
 250        lp->config = (0x16 | IOMAPflag) & ~ENABLE16flag;
 251        arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
 252
 253        /* get and check the station ID from offset 1 in shmem */
 254
 255        dev->dev_addr[0] = get_buffer_byte(dev, 1);
 256
 257        err = register_netdev(dev);
 258        if (err) {
 259                arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
 260                            ioaddr, COM9026_REG_RW_CONFIG);
 261                free_irq(dev->irq, dev);
 262                release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
 263                return err;
 264        }
 265
 266        arc_printk(D_NORMAL, dev, "COM90IO: station %02Xh found at %03lXh, IRQ %d.\n",
 267                   dev->dev_addr[0], dev->base_addr, dev->irq);
 268
 269        return 0;
 270}
 271
 272/* Do a hardware reset on the card, and set up necessary registers.
 273 *
 274 * This should be called as little as possible, because it disrupts the
 275 * token on the network (causes a RECON) and requires a significant delay.
 276 *
 277 * However, it does make sure the card is in a defined state.
 278 */
 279static int com90io_reset(struct net_device *dev, int really_reset)
 280{
 281        struct arcnet_local *lp = netdev_priv(dev);
 282        short ioaddr = dev->base_addr;
 283
 284        arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
 285                   dev->name, arcnet_inb(ioaddr, COM9026_REG_R_STATUS));
 286
 287        if (really_reset) {
 288                /* reset the card */
 289                arcnet_inb(ioaddr, COM9026_REG_R_RESET);
 290                mdelay(RESETtime);
 291        }
 292        /* Set the thing to IO-mapped, 8-bit  mode */
 293        lp->config = (0x1C | IOMAPflag) & ~ENABLE16flag;
 294        arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
 295
 296        arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
 297                                        /* clear flags & end reset */
 298        arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
 299
 300        /* verify that the ARCnet signature byte is present */
 301        if (get_buffer_byte(dev, 0) != TESTvalue) {
 302                arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
 303                return 1;
 304        }
 305        /* enable extended (512-byte) packets */
 306        arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
 307        /* done!  return success. */
 308        return 0;
 309}
 310
 311static void com90io_command(struct net_device *dev, int cmd)
 312{
 313        short ioaddr = dev->base_addr;
 314
 315        arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND);
 316}
 317
 318static int com90io_status(struct net_device *dev)
 319{
 320        short ioaddr = dev->base_addr;
 321
 322        return arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 323}
 324
 325static void com90io_setmask(struct net_device *dev, int mask)
 326{
 327        short ioaddr = dev->base_addr;
 328
 329        arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK);
 330}
 331
 332static void com90io_copy_to_card(struct net_device *dev, int bufnum,
 333                                 int offset, void *buf, int count)
 334{
 335        TIME(dev, "put_whole_buffer", count,
 336             put_whole_buffer(dev, bufnum * 512 + offset, count, buf));
 337}
 338
 339static void com90io_copy_from_card(struct net_device *dev, int bufnum,
 340                                   int offset, void *buf, int count)
 341{
 342        TIME(dev, "get_whole_buffer", count,
 343             get_whole_buffer(dev, bufnum * 512 + offset, count, buf));
 344}
 345
 346static int io;                  /* use the insmod io= irq= shmem= options */
 347static int irq;
 348static char device[9];          /* use eg. device=arc1 to change name */
 349
 350module_param(io, int, 0);
 351module_param(irq, int, 0);
 352module_param_string(device, device, sizeof(device), 0);
 353MODULE_LICENSE("GPL");
 354
 355#ifndef MODULE
 356static int __init com90io_setup(char *s)
 357{
 358        int ints[4];
 359
 360        s = get_options(s, 4, ints);
 361        if (!ints[0])
 362                return 0;
 363        switch (ints[0]) {
 364        default:                /* ERROR */
 365                pr_err("Too many arguments\n");
 366        case 2:         /* IRQ */
 367                irq = ints[2];
 368        case 1:         /* IO address */
 369                io = ints[1];
 370        }
 371        if (*s)
 372                snprintf(device, sizeof(device), "%s", s);
 373        return 1;
 374}
 375__setup("com90io=", com90io_setup);
 376#endif
 377
 378static struct net_device *my_dev;
 379
 380static int __init com90io_init(void)
 381{
 382        struct net_device *dev;
 383        int err;
 384
 385        dev = alloc_arcdev(device);
 386        if (!dev)
 387                return -ENOMEM;
 388
 389        dev->base_addr = io;
 390        dev->irq = irq;
 391        if (dev->irq == 2)
 392                dev->irq = 9;
 393
 394        err = com90io_probe(dev);
 395
 396        if (err) {
 397                free_netdev(dev);
 398                return err;
 399        }
 400
 401        my_dev = dev;
 402        return 0;
 403}
 404
 405static void __exit com90io_exit(void)
 406{
 407        struct net_device *dev = my_dev;
 408        int ioaddr = dev->base_addr;
 409
 410        unregister_netdev(dev);
 411
 412        /* In case the old driver is loaded later,
 413         * set the thing back to MMAP mode
 414         */
 415        arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
 416                    ioaddr, COM9026_REG_RW_CONFIG);
 417
 418        free_irq(dev->irq, dev);
 419        release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
 420        free_netdev(dev);
 421}
 422
 423module_init(com90io_init)
 424module_exit(com90io_exit)
 425