LXR linux/drivers/ide/ide-scan-pci.c

   1/*
   2 * support for probing IDE PCI devices in the PCI bus order
   3 *
   4 * Copyright (c) 1998-2000  Andre Hedrick <andre@linux-ide.org>
   5 * Copyright (c) 1995-1998  Mark Lord
   6 *
   7 * May be copied or modified under the terms of the GNU General Public License
   8 */
   9
  10#include <linux/kernel.h>
  11#include <linux/init.h>
  12#include <linux/module.h>
  13#include <linux/ide.h>
  14
  15/*
  16 *      Module interfaces
  17 */
  18
  19static int pre_init = 1;                /* Before first ordered IDE scan */
  20static LIST_HEAD(ide_pci_drivers);
  21
  22/*
  23 *      __ide_pci_register_driver       -       attach IDE driver
  24 *      @driver: pci driver
  25 *      @module: owner module of the driver
  26 *
  27 *      Registers a driver with the IDE layer. The IDE layer arranges that
  28 *      boot time setup is done in the expected device order and then
  29 *      hands the controllers off to the core PCI code to do the rest of
  30 *      the work.
  31 *
  32 *      Returns are the same as for pci_register_driver
  33 */
  34
  35int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
  36                              const char *mod_name)
  37{
  38        if (!pre_init)
  39                return __pci_register_driver(driver, module, mod_name);
  40        driver->driver.owner = module;
  41        list_add_tail(&driver->node, &ide_pci_drivers);
  42        return 0;
  43}
  44EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
  45
  46/**
  47 *      ide_scan_pcidev         -       find an IDE driver for a device
  48 *      @dev: PCI device to check
  49 *
  50 *      Look for an IDE driver to handle the device we are considering.
  51 *      This is only used during boot up to get the ordering correct. After
  52 *      boot up the pci layer takes over the job.
  53 */
  54
  55static int __init ide_scan_pcidev(struct pci_dev *dev)
  56{
  57        struct list_head *l;
  58        struct pci_driver *d;
  59
  60        list_for_each(l, &ide_pci_drivers) {
  61                d = list_entry(l, struct pci_driver, node);
  62                if (d->id_table) {
  63                        const struct pci_device_id *id =
  64                                pci_match_id(d->id_table, dev);
  65
  66                        if (id != NULL && d->probe(dev, id) >= 0) {
  67                                dev->driver = d;
  68                                pci_dev_get(dev);
  69                                return 1;
  70                        }
  71                }
  72        }
  73        return 0;
  74}
  75
  76/**
  77 *      ide_scan_pcibus         -       perform the initial IDE driver scan
  78 *
  79 *      Perform the initial bus rather than driver ordered scan of the
  80 *      PCI drivers. After this all IDE pci handling becomes standard
  81 *      module ordering not traditionally ordered.
  82 */
  83
  84static int __init ide_scan_pcibus(void)
  85{
  86        struct pci_dev *dev = NULL;
  87        struct pci_driver *d;
  88        struct list_head *l, *n;
  89
  90        pre_init = 0;
  91        for_each_pci_dev(dev)
  92                ide_scan_pcidev(dev);
  93
  94        /*
  95         *      Hand the drivers over to the PCI layer now we
  96         *      are post init.
  97         */
  98
  99        list_for_each_safe(l, n, &ide_pci_drivers) {
 100                list_del(l);
 101                d = list_entry(l, struct pci_driver, node);
 102                if (__pci_register_driver(d, d->driver.owner,
 103                                          d->driver.mod_name))
 104                        printk(KERN_ERR "%s: failed to register %s driver\n",
 105                                        __func__, d->driver.mod_name);
 106        }
 107
 108        return 0;
 109}
 110device_initcall(ide_scan_pcibus);
 111