/*
 * Intel Wireless WiMAX Connection 2400m
 * Linux driver model glue for USB device, reset & fw upload
 *
 *
 * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com>
 * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 * Yanir Lubetkin <yanirx.lubetkin@intel.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License version
 * 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 * 02110-1301, USA.
 *
 *
 * See i2400m-usb.h for a general description of this driver.
 *
 * This file implements driver model glue, and hook ups for the
 * generic driver to implement the bus-specific functions (device
 * communication setup/tear down, firmware upload and resetting).
 *
 * ROADMAP
 *
 * i2400mu_probe()
 *   alloc_netdev()...
 *     i2400mu_netdev_setup()
 *       i2400mu_init()
 *       i2400m_netdev_setup()
 *   i2400m_setup()...
 *
 * i2400mu_disconnect
 *   i2400m_release()
 *   free_netdev()
 *
 * i2400mu_suspend()
 *   i2400m_cmd_enter_powersave()
 *   i2400mu_notification_release()
 *
 * i2400mu_resume()
 *   i2400mu_notification_setup()
 *
 * i2400mu_bus_dev_start()        Called by i2400m_dev_start() [who is
 *   i2400mu_tx_setup()           called by i2400m_setup()]
 *   i2400mu_rx_setup()
 *   i2400mu_notification_setup()
 *
 * i2400mu_bus_dev_stop()         Called by i2400m_dev_stop() [who is
 *   i2400mu_notification_release()  called by i2400m_release()]
 *   i2400mu_rx_release()
 *   i2400mu_tx_release()
 *
 * i2400mu_bus_reset()            Called by i2400m_reset
 *   __i2400mu_reset()
 *     __i2400mu_send_barker()
 *   usb_reset_device()
 */
#include "i2400m-usb.h"
#include <linux/wimax/i2400m.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
#include <linux/module.h>


#define D_SUBMODULE usb
#include "usb-debug-levels.h"

static char i2400mu_debug_params[128];
module_param_string(debug, i2400mu_debug_params, sizeof(i2400mu_debug_params),
                    0644);
MODULE_PARM_DESC(debug,
                 "String of space-separated NAME:VALUE pairs, where NAMEs "
                 "are the different debug submodules and VALUE are the "
                 "initial debug value to set.");

/* Our firmware file name */
static const char *i2400mu_bus_fw_names_5x50[] = {
#define I2400MU_FW_FILE_NAME_v1_5 "i2400m-fw-usb-1.5.sbcf"
        I2400MU_FW_FILE_NAME_v1_5,
#define I2400MU_FW_FILE_NAME_v1_4 "i2400m-fw-usb-1.4.sbcf"
        I2400MU_FW_FILE_NAME_v1_4,
        NULL,
};


static const char *i2400mu_bus_fw_names_6050[] = {
#define I6050U_FW_FILE_NAME_v1_5 "i6050-fw-usb-1.5.sbcf"
        I6050U_FW_FILE_NAME_v1_5,
        NULL,
};


static
int i2400mu_bus_dev_start(struct i2400m *i2400m)
{
        int result;
        struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m);
        struct device *dev = &i2400mu->usb_iface->dev;

        d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
        result = i2400mu_tx_setup(i2400mu);
        if (result < 0)
                goto error_usb_tx_setup;
        result = i2400mu_rx_setup(i2400mu);
        if (result < 0)
                goto error_usb_rx_setup;
        result = i2400mu_notification_setup(i2400mu);
        if (result < 0)
                goto error_notif_setup;
        d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
        return result;

error_notif_setup:
        i2400mu_rx_release(i2400mu);
error_usb_rx_setup:
        i2400mu_tx_release(i2400mu);
error_usb_tx_setup:
        d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
        return result;
}


static
void i2400mu_bus_dev_stop(struct i2400m *i2400m)
{
        struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m);
        struct device *dev = &i2400mu->usb_iface->dev;

        d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
        i2400mu_notification_release(i2400mu);
        i2400mu_rx_release(i2400mu);
        i2400mu_tx_release(i2400mu);
        d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
}


/*
 * Sends a barker buffer to the device
 *
 * This helper will allocate a kmalloced buffer and use it to transmit
 * (then free it). Reason for this is that other arches cannot use
 * stack/vmalloc/text areas for DMA transfers.
 *
 * Error recovery here is simpler: anything is considered a hard error
 * and will move the reset code to use a last-resort bus-based reset.
 */
static
int __i2400mu_send_barker(struct i2400mu *i2400mu,
                          const __le32 *barker,
                          size_t barker_size,
                          unsigned endpoint)
{
        struct usb_endpoint_descriptor *epd = NULL;
        int pipe, actual_len, ret;
        struct device *dev = &i2400mu->usb_iface->dev;
        void *buffer;
        int do_autopm = 1;

        ret = usb_autopm_get_interface(i2400mu->usb_iface);
        if (ret < 0) {
                dev_err(dev, "RESET: can't get autopm: %d\n", ret);
                do_autopm = 0;
        }
        ret = -ENOMEM;
        buffer = kmalloc(barker_size, GFP_KERNEL);
        if (buffer == NULL)
                goto error_kzalloc;
        epd = usb_get_epd(i2400mu->usb_iface, endpoint);
        pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
        memcpy(buffer, barker, barker_size);
retry:
        ret = usb_bulk_msg(i2400mu->usb_dev, pipe, buffer, barker_size,
                           &actual_len, 200);
        switch (ret) {
        case 0:
                if (actual_len != barker_size) {        /* Too short? drop it */
                        dev_err(dev, "E: %s: short write (%d B vs %zu "
                                "expected)\n",
                                __func__, actual_len, barker_size);
                        ret = -EIO;
                }
                break;
        case -EPIPE:
                /*
                 * Stall -- maybe the device is choking with our
                 * requests. Clear it and give it some time. If they
                 * happen to often, it might be another symptom, so we
                 * reset.
                 *
                 * No error handling for usb_clear_halt(0; if it
                 * works, the retry works; if it fails, this switch
                 * does the error handling for us.
                 */
                if (edc_inc(&i2400mu->urb_edc,
                            10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
                        dev_err(dev, "E: %s: too many stalls in "
                                "URB; resetting device\n", __func__);
                        usb_queue_reset_device(i2400mu->usb_iface);
                        /* fallthrough */
                } else {
                        usb_clear_halt(i2400mu->usb_dev, pipe);
                        msleep(10);     /* give the device some time */
                        goto retry;
                }
        case -EINVAL:                   /* while removing driver */
        case -ENODEV:                   /* dev disconnect ... */
        case -ENOENT:                   /* just ignore it */
        case -ESHUTDOWN:                /* and exit */
        case -ECONNRESET:
                ret = -ESHUTDOWN;
                break;
        default:                        /* Some error? */
                if (edc_inc(&i2400mu->urb_edc,
                            EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
                        dev_err(dev, "E: %s: maximum errors in URB "
                                "exceeded; resetting device\n",
                                __func__);
                        usb_queue_reset_device(i2400mu->usb_iface);
                } else {
                        dev_warn(dev, "W: %s: cannot send URB: %d\n",
                                 __func__, ret);
                        goto retry;
                }
        }
        kfree(buffer);
error_kzalloc:
        if (do_autopm)
                usb_autopm_put_interface(i2400mu->usb_iface);
        return ret;
}


/*
 * Reset a device at different levels (warm, cold or bus)
 *
 * @i2400m: device descriptor
 * @reset_type: soft, warm or bus reset (I2400M_RT_WARM/SOFT/BUS)
 *
 * Warm and cold resets get a USB reset if they fail.
 *
 * Warm reset:
 *
 * The device will be fully reset internally, but won't be
 * disconnected from the USB bus (so no reenumeration will
 * happen). Firmware upload will be necessary.
 *
 * The device will send a reboot barker in the notification endpoint
 * that will trigger the driver to reinitialize the state
 * automatically from notif.c:i2400m_notification_grok() into
 * i2400m_dev_bootstrap_delayed().
 *
 * Cold and bus (USB) reset:
 *
 * The device will be fully reset internally, disconnected from the
 * USB bus an a reenumeration will happen. Firmware upload will be
 * necessary. Thus, we don't do any locking or struct
 * reinitialization, as we are going to be fully disconnected and
 * reenumerated.
 *
 * Note we need to return -ENODEV if a warm reset was requested and we
 * had to resort to a bus reset. See i2400m_op_reset(), wimax_reset()
 * and wimax_dev->op_reset.
 *
 * WARNING: no driver state saved/fixed
 */
static
int i2400mu_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
{
        int result;
        struct i2400mu *i2400mu =
                container_of(i2400m, struct i2400mu, i2400m);
        struct device *dev = i2400m_dev(i2400m);
        static const __le32 i2400m_WARM_BOOT_BARKER[4] = {
                cpu_to_le32(I2400M_WARM_RESET_BARKER),
                cpu_to_le32(I2400M_WARM_RESET_BARKER),
                cpu_to_le32(I2400M_WARM_RESET_BARKER),
                cpu_to_le32(I2400M_WARM_RESET_BARKER),
        };
        static const __le32 i2400m_COLD_BOOT_BARKER[4] = {
                cpu_to_le32(I2400M_COLD_RESET_BARKER),
                cpu_to_le32(I2400M_COLD_RESET_BARKER),
                cpu_to_le32(I2400M_COLD_RESET_BARKER),
                cpu_to_le32(I2400M_COLD_RESET_BARKER),
        };

        d_fnstart(3, dev, "(i2400m %p rt %u)\n", i2400m, rt);
        if (rt == I2400M_RT_WARM)
                result = __i2400mu_send_barker(
                        i2400mu, i2400m_WARM_BOOT_BARKER,
                        sizeof(i2400m_WARM_BOOT_BARKER),
                        i2400mu->endpoint_cfg.bulk_out);
        else if (rt == I2400M_RT_COLD)
                result = __i2400mu_send_barker(
                        i2400mu, i2400m_COLD_BOOT_BARKER,
                        sizeof(i2400m_COLD_BOOT_BARKER),
                        i2400mu->endpoint_cfg.reset_cold);
        else if (rt == I2400M_RT_BUS) {
                result = usb_reset_device(i2400mu->usb_dev);
                switch (result) {
                case 0:
                case -EINVAL:   /* device is gone */
                case -ENODEV:
                case -ENOENT:
                case -ESHUTDOWN:
                        result = 0;
                        break;  /* We assume the device is disconnected */
                default:
                        dev_err(dev, "USB reset failed (%d), giving up!\n",
                                result);
                }
        } else {
                result = -EINVAL;       /* shut gcc up in certain arches */
                BUG();
        }
        if (result < 0
            && result != -EINVAL        /* device is gone */
            && rt != I2400M_RT_BUS) {
                /*
                 * Things failed -- resort to lower level reset, that
                 * we queue in another context; the reason for this is
                 * that the pre and post reset functionality requires
                 * the i2400m->init_mutex; RT_WARM and RT_COLD can
                 * come from areas where i2400m->init_mutex is taken.
                 */
                dev_err(dev, "%s reset failed (%d); trying USB reset\n",
                        rt == I2400M_RT_WARM ? "warm" : "cold", result);
                usb_queue_reset_device(i2400mu->usb_iface);
                result = -ENODEV;
        }
        d_fnend(3, dev, "(i2400m %p rt %u) = %d\n", i2400m, rt, result);
        return result;
}

static void i2400mu_get_drvinfo(struct net_device *net_dev,
                                struct ethtool_drvinfo *info)
{
        struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
        struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m);
        struct usb_device *udev = i2400mu->usb_dev;

        strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
        strlcpy(info->fw_version, i2400m->fw_name ? : "",
                sizeof(info->fw_version));
        usb_make_path(udev, info->bus_info, sizeof(info->bus_info));
}

static const struct ethtool_ops i2400mu_ethtool_ops = {
        .get_drvinfo = i2400mu_get_drvinfo,
        .get_link = ethtool_op_get_link,
};

static
void i2400mu_netdev_setup(struct net_device *net_dev)
{
        struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
        struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m);
        i2400mu_init(i2400mu);
        i2400m_netdev_setup(net_dev);
        net_dev->ethtool_ops = &i2400mu_ethtool_ops;
}


/*
 * Debug levels control; see debug.h
 */
struct d_level D_LEVEL[] = {
        D_SUBMODULE_DEFINE(usb),
        D_SUBMODULE_DEFINE(fw),
        D_SUBMODULE_DEFINE(notif),
        D_SUBMODULE_DEFINE(rx),
        D_SUBMODULE_DEFINE(tx),
};
size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);


#define __debugfs_register(prefix, name, parent)                        \
do {                                                                    \
        result = d_level_register_debugfs(prefix, name, parent);        \
        if (result < 0)                                                 \
                goto error;                                             \
} while (0)


static
int i2400mu_debugfs_add(struct i2400mu *i2400mu)
{
        int result;
        struct device *dev = &i2400mu->usb_iface->dev;
        struct dentry *dentry = i2400mu->i2400m.wimax_dev.debugfs_dentry;
        struct dentry *fd;

        dentry = debugfs_create_dir("i2400m-usb", dentry);
        result = PTR_ERR(dentry);
        if (IS_ERR(dentry)) {
                if (result == -ENODEV)
                        result = 0;     /* No debugfs support */
                goto error;
        }
        i2400mu->debugfs_dentry = dentry;
        __debugfs_register("dl_", usb, dentry);
        __debugfs_register("dl_", fw, dentry);
        __debugfs_register("dl_", notif, dentry);
        __debugfs_register("dl_", rx, dentry);
        __debugfs_register("dl_", tx, dentry);

        /* Don't touch these if you don't know what you are doing */
        fd = debugfs_create_u8("rx_size_auto_shrink", 0600, dentry,
                               &i2400mu->rx_size_auto_shrink);
        result = PTR_ERR(fd);
        if (IS_ERR(fd) && result != -ENODEV) {
                dev_err(dev, "Can't create debugfs entry "
                        "rx_size_auto_shrink: %d\n", result);
                goto error;
        }

        fd = debugfs_create_size_t("rx_size", 0600, dentry,
                                   &i2400mu->rx_size);
        result = PTR_ERR(fd);
        if (IS_ERR(fd) && result != -ENODEV) {
                dev_err(dev, "Can't create debugfs entry "
                        "rx_size: %d\n", result);
                goto error;
        }

        return 0;

error:
        debugfs_remove_recursive(i2400mu->debugfs_dentry);
        return result;
}


static struct device_type i2400mu_type = {
        .name   = "wimax",
};

/*
 * Probe a i2400m interface and register it
 *
 * @iface:   USB interface to link to
 * @id:      USB class/subclass/protocol id
 * @returns: 0 if ok, < 0 errno code on error.
 *
 * Alloc a net device, initialize the bus-specific details and then
 * calls the bus-generic initialization routine. That will register
 * the wimax and netdev devices, upload the firmware [using
 * _bus_bm_*()], call _bus_dev_start() to finalize the setup of the
 * communication with the device and then will start to talk to it to
 * finnish setting it up.
 */
static
int i2400mu_probe(struct usb_interface *iface,
                  const struct usb_device_id *id)
{
        int result;
        struct net_device *net_dev;
        struct device *dev = &iface->dev;
        struct i2400m *i2400m;
        struct i2400mu *i2400mu;
        struct usb_device *usb_dev = interface_to_usbdev(iface);

        if (usb_dev->speed != USB_SPEED_HIGH)
                dev_err(dev, "device not connected as high speed\n");

        /* Allocate instance [calls i2400m_netdev_setup() on it]. */
        result = -ENOMEM;
        net_dev = alloc_netdev(sizeof(*i2400mu), "wmx%d", NET_NAME_UNKNOWN,
                               i2400mu_netdev_setup);
        if (net_dev == NULL) {
                dev_err(dev, "no memory for network device instance\n");
                goto error_alloc_netdev;
        }
        SET_NETDEV_DEV(net_dev, dev);
        SET_NETDEV_DEVTYPE(net_dev, &i2400mu_type);
        i2400m = net_dev_to_i2400m(net_dev);
        i2400mu = container_of(i2400m, struct i2400mu, i2400m);
        i2400m->wimax_dev.net_dev = net_dev;
        i2400mu->usb_dev = usb_get_dev(usb_dev);
        i2400mu->usb_iface = iface;
        usb_set_intfdata(iface, i2400mu);

        i2400m->bus_tx_block_size = I2400MU_BLK_SIZE;
        /*
         * Room required in the Tx queue for USB message to accommodate
         * a smallest payload while allocating header space is 16 bytes.
         * Adding this room  for the new tx message increases the
         * possibilities of including any payload with size <= 16 bytes.
         */
        i2400m->bus_tx_room_min = I2400MU_BLK_SIZE;
        i2400m->bus_pl_size_max = I2400MU_PL_SIZE_MAX;
        i2400m->bus_setup = NULL;
        i2400m->bus_dev_start = i2400mu_bus_dev_start;
        i2400m->bus_dev_stop = i2400mu_bus_dev_stop;
        i2400m->bus_release = NULL;
        i2400m->bus_tx_kick = i2400mu_bus_tx_kick;
        i2400m->bus_reset = i2400mu_bus_reset;
        i2400m->bus_bm_retries = I2400M_USB_BOOT_RETRIES;
        i2400m->bus_bm_cmd_send = i2400mu_bus_bm_cmd_send;
        i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
        i2400m->bus_bm_mac_addr_impaired = 0;

        switch (id->idProduct) {
        case USB_DEVICE_ID_I6050:
        case USB_DEVICE_ID_I6050_2:
        case USB_DEVICE_ID_I6150:
        case USB_DEVICE_ID_I6150_2:
        case USB_DEVICE_ID_I6150_3:
        case USB_DEVICE_ID_I6250:
                i2400mu->i6050 = 1;
                break;
        default:
                break;
        }

        if (i2400mu->i6050) {
                i2400m->bus_fw_names = i2400mu_bus_fw_names_6050;
                i2400mu->endpoint_cfg.bulk_out = 0;
                i2400mu->endpoint_cfg.notification = 3;
                i2400mu->endpoint_cfg.reset_cold = 2;
                i2400mu->endpoint_cfg.bulk_in = 1;
        } else {
                i2400m->bus_fw_names = i2400mu_bus_fw_names_5x50;
                i2400mu->endpoint_cfg.bulk_out = 0;
                i2400mu->endpoint_cfg.notification = 1;
                i2400mu->endpoint_cfg.reset_cold = 2;
                i2400mu->endpoint_cfg.bulk_in = 3;
        }
#ifdef CONFIG_PM
        iface->needs_remote_wakeup = 1;         /* autosuspend (15s delay) */
        device_init_wakeup(dev, 1);
        pm_runtime_set_autosuspend_delay(&usb_dev->dev, 15000);
        usb_enable_autosuspend(usb_dev);
#endif

        result = i2400m_setup(i2400m, I2400M_BRI_MAC_REINIT);
        if (result < 0) {
                dev_err(dev, "cannot setup device: %d\n", result);
                goto error_setup;
        }
        result = i2400mu_debugfs_add(i2400mu);
        if (result < 0) {
                dev_err(dev, "Can't register i2400mu's debugfs: %d\n", result);
                goto error_debugfs_add;
        }
        return 0;

error_debugfs_add:
        i2400m_release(i2400m);
error_setup:
        usb_set_intfdata(iface, NULL);
        usb_put_dev(i2400mu->usb_dev);
        free_netdev(net_dev);
error_alloc_netdev:
        return result;
}


/*
 * Disconect a i2400m from the system.
 *
 * i2400m_stop() has been called before, so al the rx and tx contexts
 * have been taken down already. Make sure the queue is stopped,
 * unregister netdev and i2400m, free and kill.
 */
static
void i2400mu_disconnect(struct usb_interface *iface)
{
        struct i2400mu *i2400mu = usb_get_intfdata(iface);
        struct i2400m *i2400m = &i2400mu->i2400m;
        struct net_device *net_dev = i2400m->wimax_dev.net_dev;
        struct device *dev = &iface->dev;

        d_fnstart(3, dev, "(iface %p i2400m %p)\n", iface, i2400m);

        debugfs_remove_recursive(i2400mu->debugfs_dentry);
        i2400m_release(i2400m);
        usb_set_intfdata(iface, NULL);
        usb_put_dev(i2400mu->usb_dev);
        free_netdev(net_dev);
        d_fnend(3, dev, "(iface %p i2400m %p) = void\n", iface, i2400m);
}


/*
 * Get the device ready for USB port or system standby and hibernation
 *
 * USB port and system standby are handled the same.
 *
 * When the system hibernates, the USB device is powered down and then
 * up, so we don't really have to do much here, as it will be seen as
 * a reconnect. Still for simplicity we consider this case the same as
 * suspend, so that the device has a chance to do notify the base
 * station (if connected).
 *
 * So at the end, the three cases require common handling.
 *
 * If at the time of this call the device's firmware is not loaded,
 * nothing has to be done. Note we can be "loose" about not reading
 * i2400m->updown under i2400m->init_mutex. If it happens to change
 * inmediately, other parts of the call flow will fail and effectively
 * catch it.
 *
 * If the firmware is loaded, we need to:
 *
 *  - tell the device to go into host interface power save mode, wait
 *    for it to ack
 *
 *    This is quite more interesting than it is; we need to execute a
 *    command, but this time, we don't want the code in usb-{tx,rx}.c
 *    to call the usb_autopm_get/put_interface() barriers as it'd
 *    deadlock, so we need to decrement i2400mu->do_autopm, that acts
 *    as a poor man's semaphore. Ugly, but it works.
 *
 *    As well, the device might refuse going to sleep for whichever
 *    reason. In this case we just fail. For system suspend/hibernate,
 *    we *can't* fail. We check PMSG_IS_AUTO to see if the
 *    suspend call comes from the USB stack or from the system and act
 *    in consequence.
 *
 *  - stop the notification endpoint polling
 */
static
int i2400mu_suspend(struct usb_interface *iface, pm_message_t pm_msg)
{
        int result = 0;
        struct device *dev = &iface->dev;
        struct i2400mu *i2400mu = usb_get_intfdata(iface);
        unsigned is_autosuspend = 0;
        struct i2400m *i2400m = &i2400mu->i2400m;

#ifdef CONFIG_PM
        if (PMSG_IS_AUTO(pm_msg))
                is_autosuspend = 1;
#endif

        d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event);
        rmb();          /* see i2400m->updown's documentation  */
        if (i2400m->updown == 0)
                goto no_firmware;
        if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) {
                /* ugh -- the device is connected and this suspend
                 * request is an autosuspend one (not a system standby
                 * / hibernate).
                 *
                 * The only way the device can go to standby is if the
                 * link with the base station is in IDLE mode; that
                 * were the case, we'd be in status
                 * I2400M_SS_CONNECTED_IDLE. But we are not.
                 *
                 * If we *tell* him to go power save now, it'll reset
                 * as a precautionary measure, so if this is an
                 * autosuspend thing, say no and it'll come back
                 * later, when the link is IDLE
                 */
                result = -EBADF;
                d_printf(1, dev, "fw up, link up, not-idle, autosuspend: "
                         "not entering powersave\n");
                goto error_not_now;
        }
        d_printf(1, dev, "fw up: entering powersave\n");
        atomic_dec(&i2400mu->do_autopm);
        result = i2400m_cmd_enter_powersave(i2400m);
        atomic_inc(&i2400mu->do_autopm);
        if (result < 0 && !is_autosuspend) {
                /* System suspend, can't fail */
                dev_err(dev, "failed to suspend, will reset on resume\n");
                result = 0;
        }
        if (result < 0)
                goto error_enter_powersave;
        i2400mu_notification_release(i2400mu);
        d_printf(1, dev, "powersave requested\n");
error_enter_powersave:
error_not_now:
no_firmware:
        d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n",
                iface, pm_msg.event, result);
        return result;
}


static
int i2400mu_resume(struct usb_interface *iface)
{
        int ret = 0;
        struct device *dev = &iface->dev;
        struct i2400mu *i2400mu = usb_get_intfdata(iface);
        struct i2400m *i2400m = &i2400mu->i2400m;

        d_fnstart(3, dev, "(iface %p)\n", iface);
        rmb();          /* see i2400m->updown's documentation  */
        if (i2400m->updown == 0) {
                d_printf(1, dev, "fw was down, no resume needed\n");
                goto out;
        }
        d_printf(1, dev, "fw was up, resuming\n");
        i2400mu_notification_setup(i2400mu);
        /* USB has flow control, so we don't need to give it time to
         * come back; otherwise, we'd use something like a get-state
         * command... */
out:
        d_fnend(3, dev, "(iface %p) = %d\n", iface, ret);
        return ret;
}


static
int i2400mu_reset_resume(struct usb_interface *iface)
{
        int result;
        struct device *dev = &iface->dev;
        struct i2400mu *i2400mu = usb_get_intfdata(iface);
        struct i2400m *i2400m = &i2400mu->i2400m;

        d_fnstart(3, dev, "(iface %p)\n", iface);
        result = i2400m_dev_reset_handle(i2400m, "device reset on resume");
        d_fnend(3, dev, "(iface %p) = %d\n", iface, result);
        return result < 0 ? result : 0;
}


/*
 * Another driver or user space is triggering a reset on the device
 * which contains the interface passed as an argument. Cease IO and
 * save any device state you need to restore.
 *
 * If you need to allocate memory here, use GFP_NOIO or GFP_ATOMIC, if
 * you are in atomic context.
 */
static
int i2400mu_pre_reset(struct usb_interface *iface)
{
        struct i2400mu *i2400mu = usb_get_intfdata(iface);
        return i2400m_pre_reset(&i2400mu->i2400m);
}


/*
 * The reset has completed.  Restore any saved device state and begin
 * using the device again.
 *
 * If you need to allocate memory here, use GFP_NOIO or GFP_ATOMIC, if
 * you are in atomic context.
 */
static
int i2400mu_post_reset(struct usb_interface *iface)
{
        struct i2400mu *i2400mu = usb_get_intfdata(iface);
        return i2400m_post_reset(&i2400mu->i2400m);
}


static
struct usb_device_id i2400mu_id_table[] = {
        { USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
        { USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
        { USB_DEVICE(0x8087, USB_DEVICE_ID_I6150) },
        { USB_DEVICE(0x8087, USB_DEVICE_ID_I6150_2) },
        { USB_DEVICE(0x8087, USB_DEVICE_ID_I6150_3) },
        { USB_DEVICE(0x8086, USB_DEVICE_ID_I6250) },
        { USB_DEVICE(0x8086, 0x0181) },
        { USB_DEVICE(0x8086, 0x1403) },
        { USB_DEVICE(0x8086, 0x1405) },
        { USB_DEVICE(0x8086, 0x0180) },
        { USB_DEVICE(0x8086, 0x0182) },
        { USB_DEVICE(0x8086, 0x1406) },
        { USB_DEVICE(0x8086, 0x1403) },
        { },
};
MODULE_DEVICE_TABLE(usb, i2400mu_id_table);


static
struct usb_driver i2400mu_driver = {
        .name = KBUILD_MODNAME,
        .suspend = i2400mu_suspend,
        .resume = i2400mu_resume,
        .reset_resume = i2400mu_reset_resume,
        .probe = i2400mu_probe,
        .disconnect = i2400mu_disconnect,
        .pre_reset = i2400mu_pre_reset,
        .post_reset = i2400mu_post_reset,
        .id_table = i2400mu_id_table,
        .supports_autosuspend = 1,
};

static
int __init i2400mu_driver_init(void)
{
        d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400mu_debug_params,
                       "i2400m_usb.debug");
        return usb_register(&i2400mu_driver);
}
module_init(i2400mu_driver_init);


static
void __exit i2400mu_driver_exit(void)
{
        usb_deregister(&i2400mu_driver);
}
module_exit(i2400mu_driver_exit);

MODULE_AUTHOR("Intel Corporation <linux-wimax@intel.com>");
MODULE_DESCRIPTION("Driver for USB based Intel Wireless WiMAX Connection 2400M "
                   "(5x50 & 6050)");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(I2400MU_FW_FILE_NAME_v1_5);
MODULE_FIRMWARE(I6050U_FW_FILE_NAME_v1_5);