linux/drivers/scsi/aic7xxx/aic7xxx_proc.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2000-2001 Adaptec Inc.
   3 * All rights reserved.
   4 *
   5 * Redistribution and use in source and binary forms, with or without
   6 * modification, are permitted provided that the following conditions
   7 * are met:
   8 * 1. Redistributions of source code must retain the above copyright
   9 *    notice, this list of conditions, and the following disclaimer,
  10 *    without modification.
  11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  12 *    substantially similar to the "NO WARRANTY" disclaimer below
  13 *    ("Disclaimer") and any redistribution must be conditioned upon
  14 *    including a substantially similar Disclaimer requirement for further
  15 *    binary redistribution.
  16 * 3. Neither the names of the above-listed copyright holders nor the names
  17 *    of any contributors may be used to endorse or promote products derived
  18 *    from this software without specific prior written permission.
  19 *
  20 * Alternatively, this software may be distributed under the terms of the
  21 * GNU General Public License ("GPL") version 2 as published by the Free
  22 * Software Foundation.
  23 *
  24 * NO WARRANTY
  25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  26 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  27 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  28 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  29 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  33 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  34 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  35 * POSSIBILITY OF SUCH DAMAGES.
  36 *
  37 * String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr>
  38 * sym driver.
  39 *
  40 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_proc.c#29 $
  41 */
  42#include "aic7xxx_osm.h"
  43#include "aic7xxx_inline.h"
  44#include "aic7xxx_93cx6.h"
  45
  46static void     ahc_dump_target_state(struct ahc_softc *ahc,
  47                                      struct seq_file *m,
  48                                      u_int our_id, char channel,
  49                                      u_int target_id, u_int target_offset);
  50static void     ahc_dump_device_state(struct seq_file *m,
  51                                      struct scsi_device *dev);
  52
  53/*
  54 * Table of syncrates that don't follow the "divisible by 4"
  55 * rule. This table will be expanded in future SCSI specs.
  56 */
  57static const struct {
  58        u_int period_factor;
  59        u_int period;   /* in 100ths of ns */
  60} scsi_syncrates[] = {
  61        { 0x08, 625 },  /* FAST-160 */
  62        { 0x09, 1250 }, /* FAST-80 */
  63        { 0x0a, 2500 }, /* FAST-40 40MHz */
  64        { 0x0b, 3030 }, /* FAST-40 33MHz */
  65        { 0x0c, 5000 }  /* FAST-20 */
  66};
  67
  68/*
  69 * Return the frequency in kHz corresponding to the given
  70 * sync period factor.
  71 */
  72static u_int
  73ahc_calc_syncsrate(u_int period_factor)
  74{
  75        int i;
  76
  77        /* See if the period is in the "exception" table */
  78        for (i = 0; i < ARRAY_SIZE(scsi_syncrates); i++) {
  79
  80                if (period_factor == scsi_syncrates[i].period_factor) {
  81                        /* Period in kHz */
  82                        return (100000000 / scsi_syncrates[i].period);
  83                }
  84        }
  85
  86        /*
  87         * Wasn't in the table, so use the standard
  88         * 4 times conversion.
  89         */
  90        return (10000000 / (period_factor * 4 * 10));
  91}
  92
  93static void
  94ahc_format_transinfo(struct seq_file *m, struct ahc_transinfo *tinfo)
  95{
  96        u_int speed;
  97        u_int freq;
  98        u_int mb;
  99
 100        speed = 3300;
 101        freq = 0;
 102        if (tinfo->offset != 0) {
 103                freq = ahc_calc_syncsrate(tinfo->period);
 104                speed = freq;
 105        }
 106        speed *= (0x01 << tinfo->width);
 107        mb = speed / 1000;
 108        if (mb > 0)
 109                seq_printf(m, "%d.%03dMB/s transfers", mb, speed % 1000);
 110        else
 111                seq_printf(m, "%dKB/s transfers", speed);
 112
 113        if (freq != 0) {
 114                seq_printf(m, " (%d.%03dMHz%s, offset %d",
 115                         freq / 1000, freq % 1000,
 116                         (tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0
 117                         ? " DT" : "", tinfo->offset);
 118        }
 119
 120        if (tinfo->width > 0) {
 121                if (freq != 0) {
 122                        seq_puts(m, ", ");
 123                } else {
 124                        seq_puts(m, " (");
 125                }
 126                seq_printf(m, "%dbit)", 8 * (0x01 << tinfo->width));
 127        } else if (freq != 0) {
 128                seq_putc(m, ')');
 129        }
 130        seq_putc(m, '\n');
 131}
 132
 133static void
 134ahc_dump_target_state(struct ahc_softc *ahc, struct seq_file *m,
 135                      u_int our_id, char channel, u_int target_id,
 136                      u_int target_offset)
 137{
 138        struct  scsi_target *starget;
 139        struct  ahc_initiator_tinfo *tinfo;
 140        struct  ahc_tmode_tstate *tstate;
 141        int     lun;
 142
 143        tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
 144                                    target_id, &tstate);
 145        if ((ahc->features & AHC_TWIN) != 0)
 146                seq_printf(m, "Channel %c ", channel);
 147        seq_printf(m, "Target %d Negotiation Settings\n", target_id);
 148        seq_puts(m, "\tUser: ");
 149        ahc_format_transinfo(m, &tinfo->user);
 150        starget = ahc->platform_data->starget[target_offset];
 151        if (!starget)
 152                return;
 153
 154        seq_puts(m, "\tGoal: ");
 155        ahc_format_transinfo(m, &tinfo->goal);
 156        seq_puts(m, "\tCurr: ");
 157        ahc_format_transinfo(m, &tinfo->curr);
 158
 159        for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
 160                struct scsi_device *sdev;
 161
 162                sdev = scsi_device_lookup_by_target(starget, lun);
 163
 164                if (sdev == NULL)
 165                        continue;
 166
 167                ahc_dump_device_state(m, sdev);
 168        }
 169}
 170
 171static void
 172ahc_dump_device_state(struct seq_file *m, struct scsi_device *sdev)
 173{
 174        struct ahc_linux_device *dev = scsi_transport_device_data(sdev);
 175
 176        seq_printf(m, "\tChannel %c Target %d Lun %d Settings\n",
 177                  sdev->sdev_target->channel + 'A',
 178                   sdev->sdev_target->id, (u8)sdev->lun);
 179
 180        seq_printf(m, "\t\tCommands Queued %ld\n", dev->commands_issued);
 181        seq_printf(m, "\t\tCommands Active %d\n", dev->active);
 182        seq_printf(m, "\t\tCommand Openings %d\n", dev->openings);
 183        seq_printf(m, "\t\tMax Tagged Openings %d\n", dev->maxtags);
 184        seq_printf(m, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen);
 185}
 186
 187int
 188ahc_proc_write_seeprom(struct Scsi_Host *shost, char *buffer, int length)
 189{
 190        struct  ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata;
 191        struct seeprom_descriptor sd;
 192        int have_seeprom;
 193        u_long s;
 194        int paused;
 195        int written;
 196
 197        /* Default to failure. */
 198        written = -EINVAL;
 199        ahc_lock(ahc, &s);
 200        paused = ahc_is_paused(ahc);
 201        if (!paused)
 202                ahc_pause(ahc);
 203
 204        if (length != sizeof(struct seeprom_config)) {
 205                printk("ahc_proc_write_seeprom: incorrect buffer size\n");
 206                goto done;
 207        }
 208
 209        have_seeprom = ahc_verify_cksum((struct seeprom_config*)buffer);
 210        if (have_seeprom == 0) {
 211                printk("ahc_proc_write_seeprom: cksum verification failed\n");
 212                goto done;
 213        }
 214
 215        sd.sd_ahc = ahc;
 216#if AHC_PCI_CONFIG > 0
 217        if ((ahc->chip & AHC_PCI) != 0) {
 218                sd.sd_control_offset = SEECTL;
 219                sd.sd_status_offset = SEECTL;
 220                sd.sd_dataout_offset = SEECTL;
 221                if (ahc->flags & AHC_LARGE_SEEPROM)
 222                        sd.sd_chip = C56_66;
 223                else
 224                        sd.sd_chip = C46;
 225                sd.sd_MS = SEEMS;
 226                sd.sd_RDY = SEERDY;
 227                sd.sd_CS = SEECS;
 228                sd.sd_CK = SEECK;
 229                sd.sd_DO = SEEDO;
 230                sd.sd_DI = SEEDI;
 231                have_seeprom = ahc_acquire_seeprom(ahc, &sd);
 232        } else
 233#endif
 234        if ((ahc->chip & AHC_VL) != 0) {
 235                sd.sd_control_offset = SEECTL_2840;
 236                sd.sd_status_offset = STATUS_2840;
 237                sd.sd_dataout_offset = STATUS_2840;             
 238                sd.sd_chip = C46;
 239                sd.sd_MS = 0;
 240                sd.sd_RDY = EEPROM_TF;
 241                sd.sd_CS = CS_2840;
 242                sd.sd_CK = CK_2840;
 243                sd.sd_DO = DO_2840;
 244                sd.sd_DI = DI_2840;
 245                have_seeprom = TRUE;
 246        } else {
 247                printk("ahc_proc_write_seeprom: unsupported adapter type\n");
 248                goto done;
 249        }
 250
 251        if (!have_seeprom) {
 252                printk("ahc_proc_write_seeprom: No Serial EEPROM\n");
 253                goto done;
 254        } else {
 255                u_int start_addr;
 256
 257                if (ahc->seep_config == NULL) {
 258                        ahc->seep_config = kmalloc(sizeof(*ahc->seep_config), GFP_ATOMIC);
 259                        if (ahc->seep_config == NULL) {
 260                                printk("aic7xxx: Unable to allocate serial "
 261                                       "eeprom buffer.  Write failing\n");
 262                                goto done;
 263                        }
 264                }
 265                printk("aic7xxx: Writing Serial EEPROM\n");
 266                start_addr = 32 * (ahc->channel - 'A');
 267                ahc_write_seeprom(&sd, (u_int16_t *)buffer, start_addr,
 268                                  sizeof(struct seeprom_config)/2);
 269                ahc_read_seeprom(&sd, (uint16_t *)ahc->seep_config,
 270                                 start_addr, sizeof(struct seeprom_config)/2);
 271#if AHC_PCI_CONFIG > 0
 272                if ((ahc->chip & AHC_VL) == 0)
 273                        ahc_release_seeprom(&sd);
 274#endif
 275                written = length;
 276        }
 277
 278done:
 279        if (!paused)
 280                ahc_unpause(ahc);
 281        ahc_unlock(ahc, &s);
 282        return (written);
 283}
 284
 285/*
 286 * Return information to handle /proc support for the driver.
 287 */
 288int
 289ahc_linux_show_info(struct seq_file *m, struct Scsi_Host *shost)
 290{
 291        struct  ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata;
 292        char    ahc_info[256];
 293        u_int   max_targ;
 294        u_int   i;
 295
 296        seq_printf(m, "Adaptec AIC7xxx driver version: %s\n",
 297                  AIC7XXX_DRIVER_VERSION);
 298        seq_printf(m, "%s\n", ahc->description);
 299        ahc_controller_info(ahc, ahc_info);
 300        seq_printf(m, "%s\n", ahc_info);
 301        seq_printf(m, "Allocated SCBs: %d, SG List Length: %d\n\n",
 302                  ahc->scb_data->numscbs, AHC_NSEG);
 303
 304
 305        if (ahc->seep_config == NULL)
 306                seq_puts(m, "No Serial EEPROM\n");
 307        else {
 308                seq_puts(m, "Serial EEPROM:\n");
 309                for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) {
 310                        if (((i % 8) == 0) && (i != 0)) {
 311                                seq_putc(m, '\n');
 312                        }
 313                        seq_printf(m, "0x%.4x ",
 314                                  ((uint16_t*)ahc->seep_config)[i]);
 315                }
 316                seq_putc(m, '\n');
 317        }
 318        seq_putc(m, '\n');
 319
 320        max_targ = 16;
 321        if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
 322                max_targ = 8;
 323
 324        for (i = 0; i < max_targ; i++) {
 325                u_int our_id;
 326                u_int target_id;
 327                char channel;
 328
 329                channel = 'A';
 330                our_id = ahc->our_id;
 331                target_id = i;
 332                if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
 333                        channel = 'B';
 334                        our_id = ahc->our_id_b;
 335                        target_id = i % 8;
 336                }
 337
 338                ahc_dump_target_state(ahc, m, our_id,
 339                                      channel, target_id, i);
 340        }
 341        return 0;
 342}
 343