linux/drivers/media/pci/cx25821/cx25821-audio-upstream.c
<<
>>
Prefs
   1/*
   2 *  Driver for the Conexant CX25821 PCIe bridge
   3 *
   4 *  Copyright (C) 2009 Conexant Systems Inc.
   5 *  Authors  <hiep.huynh@conexant.com>, <shu.lin@conexant.com>
   6 *
   7 *  This program is free software; you can redistribute it and/or modify
   8 *  it under the terms of the GNU General Public License as published by
   9 *  the Free Software Foundation; either version 2 of the License, or
  10 *  (at your option) any later version.
  11 *
  12 *  This program is distributed in the hope that it will be useful,
  13 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 *
  16 *  GNU General Public License for more details.
  17 *
  18 *  You should have received a copy of the GNU General Public License
  19 *  along with this program; if not, write to the Free Software
  20 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21 */
  22
  23#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  24
  25#include "cx25821-video.h"
  26#include "cx25821-audio-upstream.h"
  27
  28#include <linux/fs.h>
  29#include <linux/errno.h>
  30#include <linux/kernel.h>
  31#include <linux/init.h>
  32#include <linux/module.h>
  33#include <linux/syscalls.h>
  34#include <linux/file.h>
  35#include <linux/fcntl.h>
  36#include <linux/delay.h>
  37#include <linux/slab.h>
  38#include <linux/uaccess.h>
  39
  40MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards");
  41MODULE_AUTHOR("Hiep Huynh <hiep.huynh@conexant.com>");
  42MODULE_LICENSE("GPL");
  43
  44static int _intr_msk = FLD_AUD_SRC_RISCI1 | FLD_AUD_SRC_OF |
  45                        FLD_AUD_SRC_SYNC | FLD_AUD_SRC_OPC_ERR;
  46
  47static int cx25821_sram_channel_setup_upstream_audio(struct cx25821_dev *dev,
  48                                              const struct sram_channel *ch,
  49                                              unsigned int bpl, u32 risc)
  50{
  51        unsigned int i, lines;
  52        u32 cdt;
  53
  54        if (ch->cmds_start == 0) {
  55                cx_write(ch->ptr1_reg, 0);
  56                cx_write(ch->ptr2_reg, 0);
  57                cx_write(ch->cnt2_reg, 0);
  58                cx_write(ch->cnt1_reg, 0);
  59                return 0;
  60        }
  61
  62        bpl = (bpl + 7) & ~7;   /* alignment */
  63        cdt = ch->cdt;
  64        lines = ch->fifo_size / bpl;
  65
  66        if (lines > 3)
  67                lines = 3;
  68
  69        BUG_ON(lines < 2);
  70
  71        /* write CDT */
  72        for (i = 0; i < lines; i++) {
  73                cx_write(cdt + 16 * i, ch->fifo_start + bpl * i);
  74                cx_write(cdt + 16 * i + 4, 0);
  75                cx_write(cdt + 16 * i + 8, 0);
  76                cx_write(cdt + 16 * i + 12, 0);
  77        }
  78
  79        /* write CMDS */
  80        cx_write(ch->cmds_start + 0, risc);
  81
  82        cx_write(ch->cmds_start + 4, 0);
  83        cx_write(ch->cmds_start + 8, cdt);
  84        cx_write(ch->cmds_start + 12, AUDIO_CDT_SIZE_QW);
  85        cx_write(ch->cmds_start + 16, ch->ctrl_start);
  86
  87        /* IQ size */
  88        cx_write(ch->cmds_start + 20, AUDIO_IQ_SIZE_DW);
  89
  90        for (i = 24; i < 80; i += 4)
  91                cx_write(ch->cmds_start + i, 0);
  92
  93        /* fill registers */
  94        cx_write(ch->ptr1_reg, ch->fifo_start);
  95        cx_write(ch->ptr2_reg, cdt);
  96        cx_write(ch->cnt2_reg, AUDIO_CDT_SIZE_QW);
  97        cx_write(ch->cnt1_reg, AUDIO_CLUSTER_SIZE_QW - 1);
  98
  99        return 0;
 100}
 101
 102static __le32 *cx25821_risc_field_upstream_audio(struct cx25821_dev *dev,
 103                                                 __le32 *rp,
 104                                                 dma_addr_t databuf_phys_addr,
 105                                                 unsigned int bpl,
 106                                                 int fifo_enable)
 107{
 108        unsigned int line;
 109        const struct sram_channel *sram_ch =
 110                dev->channels[dev->_audio_upstream_channel].sram_channels;
 111        int offset = 0;
 112
 113        /* scan lines */
 114        for (line = 0; line < LINES_PER_AUDIO_BUFFER; line++) {
 115                *(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl);
 116                *(rp++) = cpu_to_le32(databuf_phys_addr + offset);
 117                *(rp++) = cpu_to_le32(0);       /* bits 63-32 */
 118
 119                /* Check if we need to enable the FIFO
 120                 * after the first 3 lines.
 121                 * For the upstream audio channel,
 122                 * the risc engine will enable the FIFO */
 123                if (fifo_enable && line == 2) {
 124                        *(rp++) = RISC_WRITECR;
 125                        *(rp++) = sram_ch->dma_ctl;
 126                        *(rp++) = sram_ch->fld_aud_fifo_en;
 127                        *(rp++) = 0x00000020;
 128                }
 129
 130                offset += AUDIO_LINE_SIZE;
 131        }
 132
 133        return rp;
 134}
 135
 136static int cx25821_risc_buffer_upstream_audio(struct cx25821_dev *dev,
 137                                       struct pci_dev *pci,
 138                                       unsigned int bpl, unsigned int lines)
 139{
 140        __le32 *rp;
 141        int fifo_enable = 0;
 142        int frame = 0, i = 0;
 143        int frame_size = AUDIO_DATA_BUF_SZ;
 144        int databuf_offset = 0;
 145        int risc_flag = RISC_CNT_INC;
 146        dma_addr_t risc_phys_jump_addr;
 147
 148        /* Virtual address of Risc buffer program */
 149        rp = dev->_risc_virt_addr;
 150
 151        /* sync instruction */
 152        *(rp++) = cpu_to_le32(RISC_RESYNC | AUDIO_SYNC_LINE);
 153
 154        for (frame = 0; frame < NUM_AUDIO_FRAMES; frame++) {
 155                databuf_offset = frame_size * frame;
 156
 157                if (frame == 0) {
 158                        fifo_enable = 1;
 159                        risc_flag = RISC_CNT_RESET;
 160                } else {
 161                        fifo_enable = 0;
 162                        risc_flag = RISC_CNT_INC;
 163                }
 164
 165                /* Calculate physical jump address */
 166                if ((frame + 1) == NUM_AUDIO_FRAMES) {
 167                        risc_phys_jump_addr =
 168                            dev->_risc_phys_start_addr +
 169                            RISC_SYNC_INSTRUCTION_SIZE;
 170                } else {
 171                        risc_phys_jump_addr =
 172                            dev->_risc_phys_start_addr +
 173                            RISC_SYNC_INSTRUCTION_SIZE +
 174                            AUDIO_RISC_DMA_BUF_SIZE * (frame + 1);
 175                }
 176
 177                rp = cx25821_risc_field_upstream_audio(dev, rp,
 178                                dev->_audiodata_buf_phys_addr + databuf_offset,
 179                                bpl, fifo_enable);
 180
 181                if (USE_RISC_NOOP_AUDIO) {
 182                        for (i = 0; i < NUM_NO_OPS; i++)
 183                                *(rp++) = cpu_to_le32(RISC_NOOP);
 184                }
 185
 186                /* Loop to (Nth)FrameRISC or to Start of Risc program &
 187                 * generate IRQ */
 188                *(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | risc_flag);
 189                *(rp++) = cpu_to_le32(risc_phys_jump_addr);
 190                *(rp++) = cpu_to_le32(0);
 191
 192                /* Recalculate virtual address based on frame index */
 193                rp = dev->_risc_virt_addr + RISC_SYNC_INSTRUCTION_SIZE / 4 +
 194                        (AUDIO_RISC_DMA_BUF_SIZE * (frame + 1) / 4);
 195        }
 196
 197        return 0;
 198}
 199
 200static void cx25821_free_memory_audio(struct cx25821_dev *dev)
 201{
 202        if (dev->_risc_virt_addr) {
 203                pci_free_consistent(dev->pci, dev->_audiorisc_size,
 204                                    dev->_risc_virt_addr, dev->_risc_phys_addr);
 205                dev->_risc_virt_addr = NULL;
 206        }
 207
 208        if (dev->_audiodata_buf_virt_addr) {
 209                pci_free_consistent(dev->pci, dev->_audiodata_buf_size,
 210                                    dev->_audiodata_buf_virt_addr,
 211                                    dev->_audiodata_buf_phys_addr);
 212                dev->_audiodata_buf_virt_addr = NULL;
 213        }
 214}
 215
 216void cx25821_stop_upstream_audio(struct cx25821_dev *dev)
 217{
 218        const struct sram_channel *sram_ch =
 219                dev->channels[AUDIO_UPSTREAM_SRAM_CHANNEL_B].sram_channels;
 220        u32 tmp = 0;
 221
 222        if (!dev->_audio_is_running) {
 223                printk(KERN_DEBUG
 224                       pr_fmt("No audio file is currently running so return!\n"));
 225                return;
 226        }
 227        /* Disable RISC interrupts */
 228        cx_write(sram_ch->int_msk, 0);
 229
 230        /* Turn OFF risc and fifo enable in AUD_DMA_CNTRL */
 231        tmp = cx_read(sram_ch->dma_ctl);
 232        cx_write(sram_ch->dma_ctl,
 233                 tmp & ~(sram_ch->fld_aud_fifo_en | sram_ch->fld_aud_risc_en));
 234
 235        /* Clear data buffer memory */
 236        if (dev->_audiodata_buf_virt_addr)
 237                memset(dev->_audiodata_buf_virt_addr, 0,
 238                       dev->_audiodata_buf_size);
 239
 240        dev->_audio_is_running = 0;
 241        dev->_is_first_audio_frame = 0;
 242        dev->_audioframe_count = 0;
 243        dev->_audiofile_status = END_OF_FILE;
 244
 245        flush_work(&dev->_audio_work_entry);
 246
 247        kfree(dev->_audiofilename);
 248}
 249
 250void cx25821_free_mem_upstream_audio(struct cx25821_dev *dev)
 251{
 252        if (dev->_audio_is_running)
 253                cx25821_stop_upstream_audio(dev);
 254
 255        cx25821_free_memory_audio(dev);
 256}
 257
 258static int cx25821_get_audio_data(struct cx25821_dev *dev,
 259                           const struct sram_channel *sram_ch)
 260{
 261        struct file *file;
 262        int frame_index_temp = dev->_audioframe_index;
 263        int i = 0;
 264        int frame_size = AUDIO_DATA_BUF_SZ;
 265        int frame_offset = frame_size * frame_index_temp;
 266        char mybuf[AUDIO_LINE_SIZE];
 267        loff_t file_offset = dev->_audioframe_count * frame_size;
 268        char *p = NULL;
 269
 270        if (dev->_audiofile_status == END_OF_FILE)
 271                return 0;
 272
 273        file = filp_open(dev->_audiofilename, O_RDONLY | O_LARGEFILE, 0);
 274        if (IS_ERR(file)) {
 275                pr_err("%s(): ERROR opening file(%s) with errno = %ld!\n",
 276                       __func__, dev->_audiofilename, -PTR_ERR(file));
 277                return PTR_ERR(file);
 278        }
 279
 280        if (dev->_audiodata_buf_virt_addr)
 281                p = (char *)dev->_audiodata_buf_virt_addr + frame_offset;
 282
 283        for (i = 0; i < dev->_audio_lines_count; i++) {
 284                int n = kernel_read(file, file_offset, mybuf, AUDIO_LINE_SIZE);
 285                if (n < AUDIO_LINE_SIZE) {
 286                        pr_info("Done: exit %s() since no more bytes to read from Audio file\n",
 287                                __func__);
 288                        dev->_audiofile_status = END_OF_FILE;
 289                        fput(file);
 290                        return 0;
 291                }
 292                dev->_audiofile_status = IN_PROGRESS;
 293                if (p) {
 294                        memcpy(p, mybuf, n);
 295                        p += n;
 296                }
 297                file_offset += n;
 298        }
 299        dev->_audioframe_count++;
 300        fput(file);
 301
 302        return 0;
 303}
 304
 305static void cx25821_audioups_handler(struct work_struct *work)
 306{
 307        struct cx25821_dev *dev = container_of(work, struct cx25821_dev,
 308                        _audio_work_entry);
 309
 310        if (!dev) {
 311                pr_err("ERROR %s(): since container_of(work_struct) FAILED!\n",
 312                        __func__);
 313                return;
 314        }
 315
 316        cx25821_get_audio_data(dev, dev->channels[dev->_audio_upstream_channel].
 317                        sram_channels);
 318}
 319
 320static int cx25821_openfile_audio(struct cx25821_dev *dev,
 321                           const struct sram_channel *sram_ch)
 322{
 323        char *p = (void *)dev->_audiodata_buf_virt_addr;
 324        struct file *file;
 325        loff_t offset;
 326        int i, j;
 327
 328        file = filp_open(dev->_audiofilename, O_RDONLY | O_LARGEFILE, 0);
 329        if (IS_ERR(file)) {
 330                pr_err("%s(): ERROR opening file(%s) with errno = %ld!\n",
 331                        __func__, dev->_audiofilename, PTR_ERR(file));
 332                return PTR_ERR(file);
 333        }
 334
 335        for (j = 0, offset = 0; j < NUM_AUDIO_FRAMES; j++) {
 336                for (i = 0; i < dev->_audio_lines_count; i++) {
 337                        char buf[AUDIO_LINE_SIZE];
 338                        int n = kernel_read(file, offset, buf,
 339                                                AUDIO_LINE_SIZE);
 340
 341                        if (n < AUDIO_LINE_SIZE) {
 342                                pr_info("Done: exit %s() since no more bytes to read from Audio file\n",
 343                                        __func__);
 344                                dev->_audiofile_status = END_OF_FILE;
 345                                fput(file);
 346                                return 0;
 347                        }
 348
 349                        if (p)
 350                                memcpy(p + offset, buf, n);
 351
 352                        offset += n;
 353                }
 354                dev->_audioframe_count++;
 355        }
 356        dev->_audiofile_status = IN_PROGRESS;
 357        fput(file);
 358        return 0;
 359}
 360
 361static int cx25821_audio_upstream_buffer_prepare(struct cx25821_dev *dev,
 362                                                 const struct sram_channel *sram_ch,
 363                                                 int bpl)
 364{
 365        int ret = 0;
 366        dma_addr_t dma_addr;
 367        dma_addr_t data_dma_addr;
 368
 369        cx25821_free_memory_audio(dev);
 370
 371        dev->_risc_virt_addr = pci_alloc_consistent(dev->pci,
 372                        dev->audio_upstream_riscbuf_size, &dma_addr);
 373        dev->_risc_virt_start_addr = dev->_risc_virt_addr;
 374        dev->_risc_phys_start_addr = dma_addr;
 375        dev->_risc_phys_addr = dma_addr;
 376        dev->_audiorisc_size = dev->audio_upstream_riscbuf_size;
 377
 378        if (!dev->_risc_virt_addr) {
 379                printk(KERN_DEBUG
 380                        pr_fmt("ERROR: pci_alloc_consistent() FAILED to allocate memory for RISC program! Returning\n"));
 381                return -ENOMEM;
 382        }
 383        /* Clear out memory at address */
 384        memset(dev->_risc_virt_addr, 0, dev->_audiorisc_size);
 385
 386        /* For Audio Data buffer allocation */
 387        dev->_audiodata_buf_virt_addr = pci_alloc_consistent(dev->pci,
 388                        dev->audio_upstream_databuf_size, &data_dma_addr);
 389        dev->_audiodata_buf_phys_addr = data_dma_addr;
 390        dev->_audiodata_buf_size = dev->audio_upstream_databuf_size;
 391
 392        if (!dev->_audiodata_buf_virt_addr) {
 393                printk(KERN_DEBUG
 394                        pr_fmt("ERROR: pci_alloc_consistent() FAILED to allocate memory for data buffer! Returning\n"));
 395                return -ENOMEM;
 396        }
 397        /* Clear out memory at address */
 398        memset(dev->_audiodata_buf_virt_addr, 0, dev->_audiodata_buf_size);
 399
 400        ret = cx25821_openfile_audio(dev, sram_ch);
 401        if (ret < 0)
 402                return ret;
 403
 404        /* Creating RISC programs */
 405        ret = cx25821_risc_buffer_upstream_audio(dev, dev->pci, bpl,
 406                                                dev->_audio_lines_count);
 407        if (ret < 0) {
 408                printk(KERN_DEBUG
 409                        pr_fmt("ERROR creating audio upstream RISC programs!\n"));
 410                goto error;
 411        }
 412
 413        return 0;
 414
 415error:
 416        return ret;
 417}
 418
 419static int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num,
 420                               u32 status)
 421{
 422        int i = 0;
 423        u32 int_msk_tmp;
 424        const struct sram_channel *channel = dev->channels[chan_num].sram_channels;
 425        dma_addr_t risc_phys_jump_addr;
 426        __le32 *rp;
 427
 428        if (status & FLD_AUD_SRC_RISCI1) {
 429                /* Get interrupt_index of the program that interrupted */
 430                u32 prog_cnt = cx_read(channel->gpcnt);
 431
 432                /* Since we've identified our IRQ, clear our bits from the
 433                 * interrupt mask and interrupt status registers */
 434                cx_write(channel->int_msk, 0);
 435                cx_write(channel->int_stat, cx_read(channel->int_stat));
 436
 437                spin_lock(&dev->slock);
 438
 439                while (prog_cnt != dev->_last_index_irq) {
 440                        /* Update _last_index_irq */
 441                        if (dev->_last_index_irq < (NUMBER_OF_PROGRAMS - 1))
 442                                dev->_last_index_irq++;
 443                        else
 444                                dev->_last_index_irq = 0;
 445
 446                        dev->_audioframe_index = dev->_last_index_irq;
 447
 448                        schedule_work(&dev->_audio_work_entry);
 449                }
 450
 451                if (dev->_is_first_audio_frame) {
 452                        dev->_is_first_audio_frame = 0;
 453
 454                        if (dev->_risc_virt_start_addr != NULL) {
 455                                risc_phys_jump_addr =
 456                                        dev->_risc_phys_start_addr +
 457                                        RISC_SYNC_INSTRUCTION_SIZE +
 458                                        AUDIO_RISC_DMA_BUF_SIZE;
 459
 460                                rp = cx25821_risc_field_upstream_audio(dev,
 461                                                dev->_risc_virt_start_addr + 1,
 462                                                dev->_audiodata_buf_phys_addr,
 463                                                AUDIO_LINE_SIZE, FIFO_DISABLE);
 464
 465                                if (USE_RISC_NOOP_AUDIO) {
 466                                        for (i = 0; i < NUM_NO_OPS; i++) {
 467                                                *(rp++) =
 468                                                    cpu_to_le32(RISC_NOOP);
 469                                        }
 470                                }
 471                                /* Jump to 2nd Audio Frame */
 472                                *(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 |
 473                                                RISC_CNT_RESET);
 474                                *(rp++) = cpu_to_le32(risc_phys_jump_addr);
 475                                *(rp++) = cpu_to_le32(0);
 476                        }
 477                }
 478
 479                spin_unlock(&dev->slock);
 480        } else {
 481                if (status & FLD_AUD_SRC_OF)
 482                        pr_warn("%s(): Audio Received Overflow Error Interrupt!\n",
 483                                __func__);
 484
 485                if (status & FLD_AUD_SRC_SYNC)
 486                        pr_warn("%s(): Audio Received Sync Error Interrupt!\n",
 487                                __func__);
 488
 489                if (status & FLD_AUD_SRC_OPC_ERR)
 490                        pr_warn("%s(): Audio Received OpCode Error Interrupt!\n",
 491                                __func__);
 492
 493                /* Read and write back the interrupt status register to clear
 494                 * our bits */
 495                cx_write(channel->int_stat, cx_read(channel->int_stat));
 496        }
 497
 498        if (dev->_audiofile_status == END_OF_FILE) {
 499                pr_warn("EOF Channel Audio Framecount = %d\n",
 500                        dev->_audioframe_count);
 501                return -1;
 502        }
 503        /* ElSE, set the interrupt mask register, re-enable irq. */
 504        int_msk_tmp = cx_read(channel->int_msk);
 505        cx_write(channel->int_msk, int_msk_tmp |= _intr_msk);
 506
 507        return 0;
 508}
 509
 510static irqreturn_t cx25821_upstream_irq_audio(int irq, void *dev_id)
 511{
 512        struct cx25821_dev *dev = dev_id;
 513        u32 audio_status;
 514        int handled = 0;
 515        const struct sram_channel *sram_ch;
 516
 517        if (!dev)
 518                return -1;
 519
 520        sram_ch = dev->channels[dev->_audio_upstream_channel].sram_channels;
 521
 522        audio_status = cx_read(sram_ch->int_stat);
 523
 524        /* Only deal with our interrupt */
 525        if (audio_status) {
 526                handled = cx25821_audio_upstream_irq(dev,
 527                                dev->_audio_upstream_channel, audio_status);
 528        }
 529
 530        if (handled < 0)
 531                cx25821_stop_upstream_audio(dev);
 532        else
 533                handled += handled;
 534
 535        return IRQ_RETVAL(handled);
 536}
 537
 538static void cx25821_wait_fifo_enable(struct cx25821_dev *dev,
 539                                     const struct sram_channel *sram_ch)
 540{
 541        int count = 0;
 542        u32 tmp;
 543
 544        do {
 545                /* Wait 10 microsecond before checking to see if the FIFO is
 546                 * turned ON. */
 547                udelay(10);
 548
 549                tmp = cx_read(sram_ch->dma_ctl);
 550
 551                /* 10 millisecond timeout */
 552                if (count++ > 1000) {
 553                        pr_err("ERROR: %s() fifo is NOT turned on. Timeout!\n",
 554                                __func__);
 555                        return;
 556                }
 557
 558        } while (!(tmp & sram_ch->fld_aud_fifo_en));
 559
 560}
 561
 562static int cx25821_start_audio_dma_upstream(struct cx25821_dev *dev,
 563                                            const struct sram_channel *sram_ch)
 564{
 565        u32 tmp = 0;
 566        int err = 0;
 567
 568        /* Set the physical start address of the RISC program in the initial
 569         * program counter(IPC) member of the CMDS. */
 570        cx_write(sram_ch->cmds_start + 0, dev->_risc_phys_addr);
 571        /* Risc IPC High 64 bits 63-32 */
 572        cx_write(sram_ch->cmds_start + 4, 0);
 573
 574        /* reset counter */
 575        cx_write(sram_ch->gpcnt_ctl, 3);
 576
 577        /* Set the line length       (It looks like we do not need to set the
 578         * line length) */
 579        cx_write(sram_ch->aud_length, AUDIO_LINE_SIZE & FLD_AUD_DST_LN_LNGTH);
 580
 581        /* Set the input mode to 16-bit */
 582        tmp = cx_read(sram_ch->aud_cfg);
 583        tmp |= FLD_AUD_SRC_ENABLE | FLD_AUD_DST_PK_MODE | FLD_AUD_CLK_ENABLE |
 584                FLD_AUD_MASTER_MODE | FLD_AUD_CLK_SELECT_PLL_D |
 585                FLD_AUD_SONY_MODE;
 586        cx_write(sram_ch->aud_cfg, tmp);
 587
 588        /* Read and write back the interrupt status register to clear it */
 589        tmp = cx_read(sram_ch->int_stat);
 590        cx_write(sram_ch->int_stat, tmp);
 591
 592        /* Clear our bits from the interrupt status register. */
 593        cx_write(sram_ch->int_stat, _intr_msk);
 594
 595        /* Set the interrupt mask register, enable irq. */
 596        cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit));
 597        tmp = cx_read(sram_ch->int_msk);
 598        cx_write(sram_ch->int_msk, tmp |= _intr_msk);
 599
 600        err = request_irq(dev->pci->irq, cx25821_upstream_irq_audio,
 601                        IRQF_SHARED, dev->name, dev);
 602        if (err < 0) {
 603                pr_err("%s: can't get upstream IRQ %d\n", dev->name,
 604                                dev->pci->irq);
 605                goto fail_irq;
 606        }
 607
 608        /* Start the DMA  engine */
 609        tmp = cx_read(sram_ch->dma_ctl);
 610        cx_set(sram_ch->dma_ctl, tmp | sram_ch->fld_aud_risc_en);
 611
 612        dev->_audio_is_running = 1;
 613        dev->_is_first_audio_frame = 1;
 614
 615        /* The fifo_en bit turns on by the first Risc program */
 616        cx25821_wait_fifo_enable(dev, sram_ch);
 617
 618        return 0;
 619
 620fail_irq:
 621        cx25821_dev_unregister(dev);
 622        return err;
 623}
 624
 625int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
 626{
 627        const struct sram_channel *sram_ch;
 628        int err = 0;
 629
 630        if (dev->_audio_is_running) {
 631                pr_warn("Audio Channel is still running so return!\n");
 632                return 0;
 633        }
 634
 635        dev->_audio_upstream_channel = channel_select;
 636        sram_ch = dev->channels[channel_select].sram_channels;
 637
 638        /* Work queue */
 639        INIT_WORK(&dev->_audio_work_entry, cx25821_audioups_handler);
 640
 641        dev->_last_index_irq = 0;
 642        dev->_audio_is_running = 0;
 643        dev->_audioframe_count = 0;
 644        dev->_audiofile_status = RESET_STATUS;
 645        dev->_audio_lines_count = LINES_PER_AUDIO_BUFFER;
 646        _line_size = AUDIO_LINE_SIZE;
 647
 648        if ((dev->input_audiofilename) &&
 649            (strcmp(dev->input_audiofilename, "") != 0))
 650                dev->_audiofilename = kstrdup(dev->input_audiofilename,
 651                                              GFP_KERNEL);
 652        else
 653                dev->_audiofilename = kstrdup(_defaultAudioName,
 654                                              GFP_KERNEL);
 655
 656        if (!dev->_audiofilename) {
 657                err = -ENOMEM;
 658                goto error;
 659        }
 660
 661        cx25821_sram_channel_setup_upstream_audio(dev, sram_ch,
 662                                                  _line_size, 0);
 663
 664        dev->audio_upstream_riscbuf_size =
 665                AUDIO_RISC_DMA_BUF_SIZE * NUM_AUDIO_PROGS +
 666                RISC_SYNC_INSTRUCTION_SIZE;
 667        dev->audio_upstream_databuf_size = AUDIO_DATA_BUF_SZ * NUM_AUDIO_PROGS;
 668
 669        /* Allocating buffers and prepare RISC program */
 670        err = cx25821_audio_upstream_buffer_prepare(dev, sram_ch,
 671                                                        _line_size);
 672        if (err < 0) {
 673                pr_err("%s: Failed to set up Audio upstream buffers!\n",
 674                        dev->name);
 675                goto error;
 676        }
 677        /* Start RISC engine */
 678        cx25821_start_audio_dma_upstream(dev, sram_ch);
 679
 680        return 0;
 681
 682error:
 683        cx25821_dev_unregister(dev);
 684
 685        return err;
 686}
 687