linux/drivers/misc/sgi-xp/xpc_main.c
<<
>>
Prefs
   1/*
   2 * This file is subject to the terms and conditions of the GNU General Public
   3 * License.  See the file "COPYING" in the main directory of this archive
   4 * for more details.
   5 *
   6 * Copyright (c) 2004-2009 Silicon Graphics, Inc.  All Rights Reserved.
   7 */
   8
   9/*
  10 * Cross Partition Communication (XPC) support - standard version.
  11 *
  12 *      XPC provides a message passing capability that crosses partition
  13 *      boundaries. This module is made up of two parts:
  14 *
  15 *          partition   This part detects the presence/absence of other
  16 *                      partitions. It provides a heartbeat and monitors
  17 *                      the heartbeats of other partitions.
  18 *
  19 *          channel     This part manages the channels and sends/receives
  20 *                      messages across them to/from other partitions.
  21 *
  22 *      There are a couple of additional functions residing in XP, which
  23 *      provide an interface to XPC for its users.
  24 *
  25 *
  26 *      Caveats:
  27 *
  28 *        . Currently on sn2, we have no way to determine which nasid an IRQ
  29 *          came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
  30 *          followed by an IPI. The amo indicates where data is to be pulled
  31 *          from, so after the IPI arrives, the remote partition checks the amo
  32 *          word. The IPI can actually arrive before the amo however, so other
  33 *          code must periodically check for this case. Also, remote amo
  34 *          operations do not reliably time out. Thus we do a remote PIO read
  35 *          solely to know whether the remote partition is down and whether we
  36 *          should stop sending IPIs to it. This remote PIO read operation is
  37 *          set up in a special nofault region so SAL knows to ignore (and
  38 *          cleanup) any errors due to the remote amo write, PIO read, and/or
  39 *          PIO write operations.
  40 *
  41 *          If/when new hardware solves this IPI problem, we should abandon
  42 *          the current approach.
  43 *
  44 */
  45
  46#include <linux/module.h>
  47#include <linux/slab.h>
  48#include <linux/sysctl.h>
  49#include <linux/device.h>
  50#include <linux/delay.h>
  51#include <linux/reboot.h>
  52#include <linux/kdebug.h>
  53#include <linux/kthread.h>
  54#include "xpc.h"
  55
  56#ifdef CONFIG_X86_64
  57#include <asm/traps.h>
  58#endif
  59
  60/* define two XPC debug device structures to be used with dev_dbg() et al */
  61
  62struct device_driver xpc_dbg_name = {
  63        .name = "xpc"
  64};
  65
  66struct device xpc_part_dbg_subname = {
  67        .init_name = "",        /* set to "part" at xpc_init() time */
  68        .driver = &xpc_dbg_name
  69};
  70
  71struct device xpc_chan_dbg_subname = {
  72        .init_name = "",        /* set to "chan" at xpc_init() time */
  73        .driver = &xpc_dbg_name
  74};
  75
  76struct device *xpc_part = &xpc_part_dbg_subname;
  77struct device *xpc_chan = &xpc_chan_dbg_subname;
  78
  79static int xpc_kdebug_ignore;
  80
  81/* systune related variables for /proc/sys directories */
  82
  83static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
  84static int xpc_hb_min_interval = 1;
  85static int xpc_hb_max_interval = 10;
  86
  87static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
  88static int xpc_hb_check_min_interval = 10;
  89static int xpc_hb_check_max_interval = 120;
  90
  91int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
  92static int xpc_disengage_min_timelimit; /* = 0 */
  93static int xpc_disengage_max_timelimit = 120;
  94
  95static struct ctl_table xpc_sys_xpc_hb_dir[] = {
  96        {
  97         .procname = "hb_interval",
  98         .data = &xpc_hb_interval,
  99         .maxlen = sizeof(int),
 100         .mode = 0644,
 101         .proc_handler = proc_dointvec_minmax,
 102         .extra1 = &xpc_hb_min_interval,
 103         .extra2 = &xpc_hb_max_interval},
 104        {
 105         .procname = "hb_check_interval",
 106         .data = &xpc_hb_check_interval,
 107         .maxlen = sizeof(int),
 108         .mode = 0644,
 109         .proc_handler = proc_dointvec_minmax,
 110         .extra1 = &xpc_hb_check_min_interval,
 111         .extra2 = &xpc_hb_check_max_interval},
 112        {}
 113};
 114static struct ctl_table xpc_sys_xpc_dir[] = {
 115        {
 116         .procname = "hb",
 117         .mode = 0555,
 118         .child = xpc_sys_xpc_hb_dir},
 119        {
 120         .procname = "disengage_timelimit",
 121         .data = &xpc_disengage_timelimit,
 122         .maxlen = sizeof(int),
 123         .mode = 0644,
 124         .proc_handler = proc_dointvec_minmax,
 125         .extra1 = &xpc_disengage_min_timelimit,
 126         .extra2 = &xpc_disengage_max_timelimit},
 127        {}
 128};
 129static struct ctl_table xpc_sys_dir[] = {
 130        {
 131         .procname = "xpc",
 132         .mode = 0555,
 133         .child = xpc_sys_xpc_dir},
 134        {}
 135};
 136static struct ctl_table_header *xpc_sysctl;
 137
 138/* non-zero if any remote partition disengage was timed out */
 139int xpc_disengage_timedout;
 140
 141/* #of activate IRQs received and not yet processed */
 142int xpc_activate_IRQ_rcvd;
 143DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock);
 144
 145/* IRQ handler notifies this wait queue on receipt of an IRQ */
 146DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
 147
 148static unsigned long xpc_hb_check_timeout;
 149static struct timer_list xpc_hb_timer;
 150
 151/* notification that the xpc_hb_checker thread has exited */
 152static DECLARE_COMPLETION(xpc_hb_checker_exited);
 153
 154/* notification that the xpc_discovery thread has exited */
 155static DECLARE_COMPLETION(xpc_discovery_exited);
 156
 157static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
 158
 159static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
 160static struct notifier_block xpc_reboot_notifier = {
 161        .notifier_call = xpc_system_reboot,
 162};
 163
 164static int xpc_system_die(struct notifier_block *, unsigned long, void *);
 165static struct notifier_block xpc_die_notifier = {
 166        .notifier_call = xpc_system_die,
 167};
 168
 169struct xpc_arch_operations xpc_arch_ops;
 170
 171/*
 172 * Timer function to enforce the timelimit on the partition disengage.
 173 */
 174static void
 175xpc_timeout_partition_disengage(unsigned long data)
 176{
 177        struct xpc_partition *part = (struct xpc_partition *)data;
 178
 179        DBUG_ON(time_is_after_jiffies(part->disengage_timeout));
 180
 181        (void)xpc_partition_disengaged(part);
 182
 183        DBUG_ON(part->disengage_timeout != 0);
 184        DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part)));
 185}
 186
 187/*
 188 * Timer to produce the heartbeat.  The timer structures function is
 189 * already set when this is initially called.  A tunable is used to
 190 * specify when the next timeout should occur.
 191 */
 192static void
 193xpc_hb_beater(unsigned long dummy)
 194{
 195        xpc_arch_ops.increment_heartbeat();
 196
 197        if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
 198                wake_up_interruptible(&xpc_activate_IRQ_wq);
 199
 200        xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
 201        add_timer(&xpc_hb_timer);
 202}
 203
 204static void
 205xpc_start_hb_beater(void)
 206{
 207        xpc_arch_ops.heartbeat_init();
 208        init_timer(&xpc_hb_timer);
 209        xpc_hb_timer.function = xpc_hb_beater;
 210        xpc_hb_beater(0);
 211}
 212
 213static void
 214xpc_stop_hb_beater(void)
 215{
 216        del_timer_sync(&xpc_hb_timer);
 217        xpc_arch_ops.heartbeat_exit();
 218}
 219
 220/*
 221 * At periodic intervals, scan through all active partitions and ensure
 222 * their heartbeat is still active.  If not, the partition is deactivated.
 223 */
 224static void
 225xpc_check_remote_hb(void)
 226{
 227        struct xpc_partition *part;
 228        short partid;
 229        enum xp_retval ret;
 230
 231        for (partid = 0; partid < xp_max_npartitions; partid++) {
 232
 233                if (xpc_exiting)
 234                        break;
 235
 236                if (partid == xp_partition_id)
 237                        continue;
 238
 239                part = &xpc_partitions[partid];
 240
 241                if (part->act_state == XPC_P_AS_INACTIVE ||
 242                    part->act_state == XPC_P_AS_DEACTIVATING) {
 243                        continue;
 244                }
 245
 246                ret = xpc_arch_ops.get_remote_heartbeat(part);
 247                if (ret != xpSuccess)
 248                        XPC_DEACTIVATE_PARTITION(part, ret);
 249        }
 250}
 251
 252/*
 253 * This thread is responsible for nearly all of the partition
 254 * activation/deactivation.
 255 */
 256static int
 257xpc_hb_checker(void *ignore)
 258{
 259        int force_IRQ = 0;
 260
 261        /* this thread was marked active by xpc_hb_init() */
 262
 263        set_cpus_allowed_ptr(current, cpumask_of(XPC_HB_CHECK_CPU));
 264
 265        /* set our heartbeating to other partitions into motion */
 266        xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
 267        xpc_start_hb_beater();
 268
 269        while (!xpc_exiting) {
 270
 271                dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
 272                        "been received\n",
 273                        (int)(xpc_hb_check_timeout - jiffies),
 274                        xpc_activate_IRQ_rcvd);
 275
 276                /* checking of remote heartbeats is skewed by IRQ handling */
 277                if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
 278                        xpc_hb_check_timeout = jiffies +
 279                            (xpc_hb_check_interval * HZ);
 280
 281                        dev_dbg(xpc_part, "checking remote heartbeats\n");
 282                        xpc_check_remote_hb();
 283
 284                        /*
 285                         * On sn2 we need to periodically recheck to ensure no
 286                         * IRQ/amo pairs have been missed.
 287                         */
 288                        if (is_shub())
 289                                force_IRQ = 1;
 290                }
 291
 292                /* check for outstanding IRQs */
 293                if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) {
 294                        force_IRQ = 0;
 295                        dev_dbg(xpc_part, "processing activate IRQs "
 296                                "received\n");
 297                        xpc_arch_ops.process_activate_IRQ_rcvd();
 298                }
 299
 300                /* wait for IRQ or timeout */
 301                (void)wait_event_interruptible(xpc_activate_IRQ_wq,
 302                                               (time_is_before_eq_jiffies(
 303                                                xpc_hb_check_timeout) ||
 304                                                xpc_activate_IRQ_rcvd > 0 ||
 305                                                xpc_exiting));
 306        }
 307
 308        xpc_stop_hb_beater();
 309
 310        dev_dbg(xpc_part, "heartbeat checker is exiting\n");
 311
 312        /* mark this thread as having exited */
 313        complete(&xpc_hb_checker_exited);
 314        return 0;
 315}
 316
 317/*
 318 * This thread will attempt to discover other partitions to activate
 319 * based on info provided by SAL. This new thread is short lived and
 320 * will exit once discovery is complete.
 321 */
 322static int
 323xpc_initiate_discovery(void *ignore)
 324{
 325        xpc_discovery();
 326
 327        dev_dbg(xpc_part, "discovery thread is exiting\n");
 328
 329        /* mark this thread as having exited */
 330        complete(&xpc_discovery_exited);
 331        return 0;
 332}
 333
 334/*
 335 * The first kthread assigned to a newly activated partition is the one
 336 * created by XPC HB with which it calls xpc_activating(). XPC hangs on to
 337 * that kthread until the partition is brought down, at which time that kthread
 338 * returns back to XPC HB. (The return of that kthread will signify to XPC HB
 339 * that XPC has dismantled all communication infrastructure for the associated
 340 * partition.) This kthread becomes the channel manager for that partition.
 341 *
 342 * Each active partition has a channel manager, who, besides connecting and
 343 * disconnecting channels, will ensure that each of the partition's connected
 344 * channels has the required number of assigned kthreads to get the work done.
 345 */
 346static void
 347xpc_channel_mgr(struct xpc_partition *part)
 348{
 349        while (part->act_state != XPC_P_AS_DEACTIVATING ||
 350               atomic_read(&part->nchannels_active) > 0 ||
 351               !xpc_partition_disengaged(part)) {
 352
 353                xpc_process_sent_chctl_flags(part);
 354
 355                /*
 356                 * Wait until we've been requested to activate kthreads or
 357                 * all of the channel's message queues have been torn down or
 358                 * a signal is pending.
 359                 *
 360                 * The channel_mgr_requests is set to 1 after being awakened,
 361                 * This is done to prevent the channel mgr from making one pass
 362                 * through the loop for each request, since he will
 363                 * be servicing all the requests in one pass. The reason it's
 364                 * set to 1 instead of 0 is so that other kthreads will know
 365                 * that the channel mgr is running and won't bother trying to
 366                 * wake him up.
 367                 */
 368                atomic_dec(&part->channel_mgr_requests);
 369                (void)wait_event_interruptible(part->channel_mgr_wq,
 370                                (atomic_read(&part->channel_mgr_requests) > 0 ||
 371                                 part->chctl.all_flags != 0 ||
 372                                 (part->act_state == XPC_P_AS_DEACTIVATING &&
 373                                 atomic_read(&part->nchannels_active) == 0 &&
 374                                 xpc_partition_disengaged(part))));
 375                atomic_set(&part->channel_mgr_requests, 1);
 376        }
 377}
 378
 379/*
 380 * Guarantee that the kzalloc'd memory is cacheline aligned.
 381 */
 382void *
 383xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
 384{
 385        /* see if kzalloc will give us cachline aligned memory by default */
 386        *base = kzalloc(size, flags);
 387        if (*base == NULL)
 388                return NULL;
 389
 390        if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
 391                return *base;
 392
 393        kfree(*base);
 394
 395        /* nope, we'll have to do it ourselves */
 396        *base = kzalloc(size + L1_CACHE_BYTES, flags);
 397        if (*base == NULL)
 398                return NULL;
 399
 400        return (void *)L1_CACHE_ALIGN((u64)*base);
 401}
 402
 403/*
 404 * Setup the channel structures necessary to support XPartition Communication
 405 * between the specified remote partition and the local one.
 406 */
 407static enum xp_retval
 408xpc_setup_ch_structures(struct xpc_partition *part)
 409{
 410        enum xp_retval ret;
 411        int ch_number;
 412        struct xpc_channel *ch;
 413        short partid = XPC_PARTID(part);
 414
 415        /*
 416         * Allocate all of the channel structures as a contiguous chunk of
 417         * memory.
 418         */
 419        DBUG_ON(part->channels != NULL);
 420        part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS,
 421                                 GFP_KERNEL);
 422        if (part->channels == NULL) {
 423                dev_err(xpc_chan, "can't get memory for channels\n");
 424                return xpNoMemory;
 425        }
 426
 427        /* allocate the remote open and close args */
 428
 429        part->remote_openclose_args =
 430            xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
 431                                          GFP_KERNEL, &part->
 432                                          remote_openclose_args_base);
 433        if (part->remote_openclose_args == NULL) {
 434                dev_err(xpc_chan, "can't get memory for remote connect args\n");
 435                ret = xpNoMemory;
 436                goto out_1;
 437        }
 438
 439        part->chctl.all_flags = 0;
 440        spin_lock_init(&part->chctl_lock);
 441
 442        atomic_set(&part->channel_mgr_requests, 1);
 443        init_waitqueue_head(&part->channel_mgr_wq);
 444
 445        part->nchannels = XPC_MAX_NCHANNELS;
 446
 447        atomic_set(&part->nchannels_active, 0);
 448        atomic_set(&part->nchannels_engaged, 0);
 449
 450        for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
 451                ch = &part->channels[ch_number];
 452
 453                ch->partid = partid;
 454                ch->number = ch_number;
 455                ch->flags = XPC_C_DISCONNECTED;
 456
 457                atomic_set(&ch->kthreads_assigned, 0);
 458                atomic_set(&ch->kthreads_idle, 0);
 459                atomic_set(&ch->kthreads_active, 0);
 460
 461                atomic_set(&ch->references, 0);
 462                atomic_set(&ch->n_to_notify, 0);
 463
 464                spin_lock_init(&ch->lock);
 465                init_completion(&ch->wdisconnect_wait);
 466
 467                atomic_set(&ch->n_on_msg_allocate_wq, 0);
 468                init_waitqueue_head(&ch->msg_allocate_wq);
 469                init_waitqueue_head(&ch->idle_wq);
 470        }
 471
 472        ret = xpc_arch_ops.setup_ch_structures(part);
 473        if (ret != xpSuccess)
 474                goto out_2;
 475
 476        /*
 477         * With the setting of the partition setup_state to XPC_P_SS_SETUP,
 478         * we're declaring that this partition is ready to go.
 479         */
 480        part->setup_state = XPC_P_SS_SETUP;
 481
 482        return xpSuccess;
 483
 484        /* setup of ch structures failed */
 485out_2:
 486        kfree(part->remote_openclose_args_base);
 487        part->remote_openclose_args = NULL;
 488out_1:
 489        kfree(part->channels);
 490        part->channels = NULL;
 491        return ret;
 492}
 493
 494/*
 495 * Teardown the channel structures necessary to support XPartition Communication
 496 * between the specified remote partition and the local one.
 497 */
 498static void
 499xpc_teardown_ch_structures(struct xpc_partition *part)
 500{
 501        DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
 502        DBUG_ON(atomic_read(&part->nchannels_active) != 0);
 503
 504        /*
 505         * Make this partition inaccessible to local processes by marking it
 506         * as no longer setup. Then wait before proceeding with the teardown
 507         * until all existing references cease.
 508         */
 509        DBUG_ON(part->setup_state != XPC_P_SS_SETUP);
 510        part->setup_state = XPC_P_SS_WTEARDOWN;
 511
 512        wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
 513
 514        /* now we can begin tearing down the infrastructure */
 515
 516        xpc_arch_ops.teardown_ch_structures(part);
 517
 518        kfree(part->remote_openclose_args_base);
 519        part->remote_openclose_args = NULL;
 520        kfree(part->channels);
 521        part->channels = NULL;
 522
 523        part->setup_state = XPC_P_SS_TORNDOWN;
 524}
 525
 526/*
 527 * When XPC HB determines that a partition has come up, it will create a new
 528 * kthread and that kthread will call this function to attempt to set up the
 529 * basic infrastructure used for Cross Partition Communication with the newly
 530 * upped partition.
 531 *
 532 * The kthread that was created by XPC HB and which setup the XPC
 533 * infrastructure will remain assigned to the partition becoming the channel
 534 * manager for that partition until the partition is deactivating, at which
 535 * time the kthread will teardown the XPC infrastructure and then exit.
 536 */
 537static int
 538xpc_activating(void *__partid)
 539{
 540        short partid = (u64)__partid;
 541        struct xpc_partition *part = &xpc_partitions[partid];
 542        unsigned long irq_flags;
 543
 544        DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 545
 546        spin_lock_irqsave(&part->act_lock, irq_flags);
 547
 548        if (part->act_state == XPC_P_AS_DEACTIVATING) {
 549                part->act_state = XPC_P_AS_INACTIVE;
 550                spin_unlock_irqrestore(&part->act_lock, irq_flags);
 551                part->remote_rp_pa = 0;
 552                return 0;
 553        }
 554
 555        /* indicate the thread is activating */
 556        DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ);
 557        part->act_state = XPC_P_AS_ACTIVATING;
 558
 559        XPC_SET_REASON(part, 0, 0);
 560        spin_unlock_irqrestore(&part->act_lock, irq_flags);
 561
 562        dev_dbg(xpc_part, "activating partition %d\n", partid);
 563
 564        xpc_arch_ops.allow_hb(partid);
 565
 566        if (xpc_setup_ch_structures(part) == xpSuccess) {
 567                (void)xpc_part_ref(part);       /* this will always succeed */
 568
 569                if (xpc_arch_ops.make_first_contact(part) == xpSuccess) {
 570                        xpc_mark_partition_active(part);
 571                        xpc_channel_mgr(part);
 572                        /* won't return until partition is deactivating */
 573                }
 574
 575                xpc_part_deref(part);
 576                xpc_teardown_ch_structures(part);
 577        }
 578
 579        xpc_arch_ops.disallow_hb(partid);
 580        xpc_mark_partition_inactive(part);
 581
 582        if (part->reason == xpReactivating) {
 583                /* interrupting ourselves results in activating partition */
 584                xpc_arch_ops.request_partition_reactivation(part);
 585        }
 586
 587        return 0;
 588}
 589
 590void
 591xpc_activate_partition(struct xpc_partition *part)
 592{
 593        short partid = XPC_PARTID(part);
 594        unsigned long irq_flags;
 595        struct task_struct *kthread;
 596
 597        spin_lock_irqsave(&part->act_lock, irq_flags);
 598
 599        DBUG_ON(part->act_state != XPC_P_AS_INACTIVE);
 600
 601        part->act_state = XPC_P_AS_ACTIVATION_REQ;
 602        XPC_SET_REASON(part, xpCloneKThread, __LINE__);
 603
 604        spin_unlock_irqrestore(&part->act_lock, irq_flags);
 605
 606        kthread = kthread_run(xpc_activating, (void *)((u64)partid), "xpc%02d",
 607                              partid);
 608        if (IS_ERR(kthread)) {
 609                spin_lock_irqsave(&part->act_lock, irq_flags);
 610                part->act_state = XPC_P_AS_INACTIVE;
 611                XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
 612                spin_unlock_irqrestore(&part->act_lock, irq_flags);
 613        }
 614}
 615
 616void
 617xpc_activate_kthreads(struct xpc_channel *ch, int needed)
 618{
 619        int idle = atomic_read(&ch->kthreads_idle);
 620        int assigned = atomic_read(&ch->kthreads_assigned);
 621        int wakeup;
 622
 623        DBUG_ON(needed <= 0);
 624
 625        if (idle > 0) {
 626                wakeup = (needed > idle) ? idle : needed;
 627                needed -= wakeup;
 628
 629                dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, "
 630                        "channel=%d\n", wakeup, ch->partid, ch->number);
 631
 632                /* only wakeup the requested number of kthreads */
 633                wake_up_nr(&ch->idle_wq, wakeup);
 634        }
 635
 636        if (needed <= 0)
 637                return;
 638
 639        if (needed + assigned > ch->kthreads_assigned_limit) {
 640                needed = ch->kthreads_assigned_limit - assigned;
 641                if (needed <= 0)
 642                        return;
 643        }
 644
 645        dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n",
 646                needed, ch->partid, ch->number);
 647
 648        xpc_create_kthreads(ch, needed, 0);
 649}
 650
 651/*
 652 * This function is where XPC's kthreads wait for messages to deliver.
 653 */
 654static void
 655xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 656{
 657        int (*n_of_deliverable_payloads) (struct xpc_channel *) =
 658                xpc_arch_ops.n_of_deliverable_payloads;
 659
 660        do {
 661                /* deliver messages to their intended recipients */
 662
 663                while (n_of_deliverable_payloads(ch) > 0 &&
 664                       !(ch->flags & XPC_C_DISCONNECTING)) {
 665                        xpc_deliver_payload(ch);
 666                }
 667
 668                if (atomic_inc_return(&ch->kthreads_idle) >
 669                    ch->kthreads_idle_limit) {
 670                        /* too many idle kthreads on this channel */
 671                        atomic_dec(&ch->kthreads_idle);
 672                        break;
 673                }
 674
 675                dev_dbg(xpc_chan, "idle kthread calling "
 676                        "wait_event_interruptible_exclusive()\n");
 677
 678                (void)wait_event_interruptible_exclusive(ch->idle_wq,
 679                                (n_of_deliverable_payloads(ch) > 0 ||
 680                                 (ch->flags & XPC_C_DISCONNECTING)));
 681
 682                atomic_dec(&ch->kthreads_idle);
 683
 684        } while (!(ch->flags & XPC_C_DISCONNECTING));
 685}
 686
 687static int
 688xpc_kthread_start(void *args)
 689{
 690        short partid = XPC_UNPACK_ARG1(args);
 691        u16 ch_number = XPC_UNPACK_ARG2(args);
 692        struct xpc_partition *part = &xpc_partitions[partid];
 693        struct xpc_channel *ch;
 694        int n_needed;
 695        unsigned long irq_flags;
 696        int (*n_of_deliverable_payloads) (struct xpc_channel *) =
 697                xpc_arch_ops.n_of_deliverable_payloads;
 698
 699        dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
 700                partid, ch_number);
 701
 702        ch = &part->channels[ch_number];
 703
 704        if (!(ch->flags & XPC_C_DISCONNECTING)) {
 705
 706                /* let registerer know that connection has been established */
 707
 708                spin_lock_irqsave(&ch->lock, irq_flags);
 709                if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) {
 710                        ch->flags |= XPC_C_CONNECTEDCALLOUT;
 711                        spin_unlock_irqrestore(&ch->lock, irq_flags);
 712
 713                        xpc_connected_callout(ch);
 714
 715                        spin_lock_irqsave(&ch->lock, irq_flags);
 716                        ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE;
 717                        spin_unlock_irqrestore(&ch->lock, irq_flags);
 718
 719                        /*
 720                         * It is possible that while the callout was being
 721                         * made that the remote partition sent some messages.
 722                         * If that is the case, we may need to activate
 723                         * additional kthreads to help deliver them. We only
 724                         * need one less than total #of messages to deliver.
 725                         */
 726                        n_needed = n_of_deliverable_payloads(ch) - 1;
 727                        if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
 728                                xpc_activate_kthreads(ch, n_needed);
 729
 730                } else {
 731                        spin_unlock_irqrestore(&ch->lock, irq_flags);
 732                }
 733
 734                xpc_kthread_waitmsgs(part, ch);
 735        }
 736
 737        /* let registerer know that connection is disconnecting */
 738
 739        spin_lock_irqsave(&ch->lock, irq_flags);
 740        if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
 741            !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
 742                ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
 743                spin_unlock_irqrestore(&ch->lock, irq_flags);
 744
 745                xpc_disconnect_callout(ch, xpDisconnecting);
 746
 747                spin_lock_irqsave(&ch->lock, irq_flags);
 748                ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
 749        }
 750        spin_unlock_irqrestore(&ch->lock, irq_flags);
 751
 752        if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 753            atomic_dec_return(&part->nchannels_engaged) == 0) {
 754                xpc_arch_ops.indicate_partition_disengaged(part);
 755        }
 756
 757        xpc_msgqueue_deref(ch);
 758
 759        dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n",
 760                partid, ch_number);
 761
 762        xpc_part_deref(part);
 763        return 0;
 764}
 765
 766/*
 767 * For each partition that XPC has established communications with, there is
 768 * a minimum of one kernel thread assigned to perform any operation that
 769 * may potentially sleep or block (basically the callouts to the asynchronous
 770 * functions registered via xpc_connect()).
 771 *
 772 * Additional kthreads are created and destroyed by XPC as the workload
 773 * demands.
 774 *
 775 * A kthread is assigned to one of the active channels that exists for a given
 776 * partition.
 777 */
 778void
 779xpc_create_kthreads(struct xpc_channel *ch, int needed,
 780                    int ignore_disconnecting)
 781{
 782        unsigned long irq_flags;
 783        u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
 784        struct xpc_partition *part = &xpc_partitions[ch->partid];
 785        struct task_struct *kthread;
 786        void (*indicate_partition_disengaged) (struct xpc_partition *) =
 787                xpc_arch_ops.indicate_partition_disengaged;
 788
 789        while (needed-- > 0) {
 790
 791                /*
 792                 * The following is done on behalf of the newly created
 793                 * kthread. That kthread is responsible for doing the
 794                 * counterpart to the following before it exits.
 795                 */
 796                if (ignore_disconnecting) {
 797                        if (!atomic_inc_not_zero(&ch->kthreads_assigned)) {
 798                                /* kthreads assigned had gone to zero */
 799                                BUG_ON(!(ch->flags &
 800                                         XPC_C_DISCONNECTINGCALLOUT_MADE));
 801                                break;
 802                        }
 803
 804                } else if (ch->flags & XPC_C_DISCONNECTING) {
 805                        break;
 806
 807                } else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
 808                           atomic_inc_return(&part->nchannels_engaged) == 1) {
 809                        xpc_arch_ops.indicate_partition_engaged(part);
 810                }
 811                (void)xpc_part_ref(part);
 812                xpc_msgqueue_ref(ch);
 813
 814                kthread = kthread_run(xpc_kthread_start, (void *)args,
 815                                      "xpc%02dc%d", ch->partid, ch->number);
 816                if (IS_ERR(kthread)) {
 817                        /* the fork failed */
 818
 819                        /*
 820                         * NOTE: if (ignore_disconnecting &&
 821                         * !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true,
 822                         * then we'll deadlock if all other kthreads assigned
 823                         * to this channel are blocked in the channel's
 824                         * registerer, because the only thing that will unblock
 825                         * them is the xpDisconnecting callout that this
 826                         * failed kthread_run() would have made.
 827                         */
 828
 829                        if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 830                            atomic_dec_return(&part->nchannels_engaged) == 0) {
 831                                indicate_partition_disengaged(part);
 832                        }
 833                        xpc_msgqueue_deref(ch);
 834                        xpc_part_deref(part);
 835
 836                        if (atomic_read(&ch->kthreads_assigned) <
 837                            ch->kthreads_idle_limit) {
 838                                /*
 839                                 * Flag this as an error only if we have an
 840                                 * insufficient #of kthreads for the channel
 841                                 * to function.
 842                                 */
 843                                spin_lock_irqsave(&ch->lock, irq_flags);
 844                                XPC_DISCONNECT_CHANNEL(ch, xpLackOfResources,
 845                                                       &irq_flags);
 846                                spin_unlock_irqrestore(&ch->lock, irq_flags);
 847                        }
 848                        break;
 849                }
 850        }
 851}
 852
 853void
 854xpc_disconnect_wait(int ch_number)
 855{
 856        unsigned long irq_flags;
 857        short partid;
 858        struct xpc_partition *part;
 859        struct xpc_channel *ch;
 860        int wakeup_channel_mgr;
 861
 862        /* now wait for all callouts to the caller's function to cease */
 863        for (partid = 0; partid < xp_max_npartitions; partid++) {
 864                part = &xpc_partitions[partid];
 865
 866                if (!xpc_part_ref(part))
 867                        continue;
 868
 869                ch = &part->channels[ch_number];
 870
 871                if (!(ch->flags & XPC_C_WDISCONNECT)) {
 872                        xpc_part_deref(part);
 873                        continue;
 874                }
 875
 876                wait_for_completion(&ch->wdisconnect_wait);
 877
 878                spin_lock_irqsave(&ch->lock, irq_flags);
 879                DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
 880                wakeup_channel_mgr = 0;
 881
 882                if (ch->delayed_chctl_flags) {
 883                        if (part->act_state != XPC_P_AS_DEACTIVATING) {
 884                                spin_lock(&part->chctl_lock);
 885                                part->chctl.flags[ch->number] |=
 886                                    ch->delayed_chctl_flags;
 887                                spin_unlock(&part->chctl_lock);
 888                                wakeup_channel_mgr = 1;
 889                        }
 890                        ch->delayed_chctl_flags = 0;
 891                }
 892
 893                ch->flags &= ~XPC_C_WDISCONNECT;
 894                spin_unlock_irqrestore(&ch->lock, irq_flags);
 895
 896                if (wakeup_channel_mgr)
 897                        xpc_wakeup_channel_mgr(part);
 898
 899                xpc_part_deref(part);
 900        }
 901}
 902
 903static int
 904xpc_setup_partitions(void)
 905{
 906        short partid;
 907        struct xpc_partition *part;
 908
 909        xpc_partitions = kzalloc(sizeof(struct xpc_partition) *
 910                                 xp_max_npartitions, GFP_KERNEL);
 911        if (xpc_partitions == NULL) {
 912                dev_err(xpc_part, "can't get memory for partition structure\n");
 913                return -ENOMEM;
 914        }
 915
 916        /*
 917         * The first few fields of each entry of xpc_partitions[] need to
 918         * be initialized now so that calls to xpc_connect() and
 919         * xpc_disconnect() can be made prior to the activation of any remote
 920         * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
 921         * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
 922         * PARTITION HAS BEEN ACTIVATED.
 923         */
 924        for (partid = 0; partid < xp_max_npartitions; partid++) {
 925                part = &xpc_partitions[partid];
 926
 927                DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
 928
 929                part->activate_IRQ_rcvd = 0;
 930                spin_lock_init(&part->act_lock);
 931                part->act_state = XPC_P_AS_INACTIVE;
 932                XPC_SET_REASON(part, 0, 0);
 933
 934                init_timer(&part->disengage_timer);
 935                part->disengage_timer.function =
 936                    xpc_timeout_partition_disengage;
 937                part->disengage_timer.data = (unsigned long)part;
 938
 939                part->setup_state = XPC_P_SS_UNSET;
 940                init_waitqueue_head(&part->teardown_wq);
 941                atomic_set(&part->references, 0);
 942        }
 943
 944        return xpc_arch_ops.setup_partitions();
 945}
 946
 947static void
 948xpc_teardown_partitions(void)
 949{
 950        xpc_arch_ops.teardown_partitions();
 951        kfree(xpc_partitions);
 952}
 953
 954static void
 955xpc_do_exit(enum xp_retval reason)
 956{
 957        short partid;
 958        int active_part_count, printed_waiting_msg = 0;
 959        struct xpc_partition *part;
 960        unsigned long printmsg_time, disengage_timeout = 0;
 961
 962        /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
 963        DBUG_ON(xpc_exiting == 1);
 964
 965        /*
 966         * Let the heartbeat checker thread and the discovery thread
 967         * (if one is running) know that they should exit. Also wake up
 968         * the heartbeat checker thread in case it's sleeping.
 969         */
 970        xpc_exiting = 1;
 971        wake_up_interruptible(&xpc_activate_IRQ_wq);
 972
 973        /* wait for the discovery thread to exit */
 974        wait_for_completion(&xpc_discovery_exited);
 975
 976        /* wait for the heartbeat checker thread to exit */
 977        wait_for_completion(&xpc_hb_checker_exited);
 978
 979        /* sleep for a 1/3 of a second or so */
 980        (void)msleep_interruptible(300);
 981
 982        /* wait for all partitions to become inactive */
 983
 984        printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
 985        xpc_disengage_timedout = 0;
 986
 987        do {
 988                active_part_count = 0;
 989
 990                for (partid = 0; partid < xp_max_npartitions; partid++) {
 991                        part = &xpc_partitions[partid];
 992
 993                        if (xpc_partition_disengaged(part) &&
 994                            part->act_state == XPC_P_AS_INACTIVE) {
 995                                continue;
 996                        }
 997
 998                        active_part_count++;
 999
1000                        XPC_DEACTIVATE_PARTITION(part, reason);
1001
1002                        if (part->disengage_timeout > disengage_timeout)
1003                                disengage_timeout = part->disengage_timeout;
1004                }
1005
1006                if (xpc_arch_ops.any_partition_engaged()) {
1007                        if (time_is_before_jiffies(printmsg_time)) {
1008                                dev_info(xpc_part, "waiting for remote "
1009                                         "partitions to deactivate, timeout in "
1010                                         "%ld seconds\n", (disengage_timeout -
1011                                         jiffies) / HZ);
1012                                printmsg_time = jiffies +
1013                                    (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
1014                                printed_waiting_msg = 1;
1015                        }
1016
1017                } else if (active_part_count > 0) {
1018                        if (printed_waiting_msg) {
1019                                dev_info(xpc_part, "waiting for local partition"
1020                                         " to deactivate\n");
1021                                printed_waiting_msg = 0;
1022                        }
1023
1024                } else {
1025                        if (!xpc_disengage_timedout) {
1026                                dev_info(xpc_part, "all partitions have "
1027                                         "deactivated\n");
1028                        }
1029                        break;
1030                }
1031
1032                /* sleep for a 1/3 of a second or so */
1033                (void)msleep_interruptible(300);
1034
1035        } while (1);
1036
1037        DBUG_ON(xpc_arch_ops.any_partition_engaged());
1038
1039        xpc_teardown_rsvd_page();
1040
1041        if (reason == xpUnloading) {
1042                (void)unregister_die_notifier(&xpc_die_notifier);
1043                (void)unregister_reboot_notifier(&xpc_reboot_notifier);
1044        }
1045
1046        /* clear the interface to XPC's functions */
1047        xpc_clear_interface();
1048
1049        if (xpc_sysctl)
1050                unregister_sysctl_table(xpc_sysctl);
1051
1052        xpc_teardown_partitions();
1053
1054        if (is_shub())
1055                xpc_exit_sn2();
1056        else if (is_uv())
1057                xpc_exit_uv();
1058}
1059
1060/*
1061 * This function is called when the system is being rebooted.
1062 */
1063static int
1064xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
1065{
1066        enum xp_retval reason;
1067
1068        switch (event) {
1069        case SYS_RESTART:
1070                reason = xpSystemReboot;
1071                break;
1072        case SYS_HALT:
1073                reason = xpSystemHalt;
1074                break;
1075        case SYS_POWER_OFF:
1076                reason = xpSystemPoweroff;
1077                break;
1078        default:
1079                reason = xpSystemGoingDown;
1080        }
1081
1082        xpc_do_exit(reason);
1083        return NOTIFY_DONE;
1084}
1085
1086/* Used to only allow one cpu to complete disconnect */
1087static unsigned int xpc_die_disconnecting;
1088
1089/*
1090 * Notify other partitions to deactivate from us by first disengaging from all
1091 * references to our memory.
1092 */
1093static void
1094xpc_die_deactivate(void)
1095{
1096        struct xpc_partition *part;
1097        short partid;
1098        int any_engaged;
1099        long keep_waiting;
1100        long wait_to_print;
1101
1102        if (cmpxchg(&xpc_die_disconnecting, 0, 1))
1103                return;
1104
1105        /* keep xpc_hb_checker thread from doing anything (just in case) */
1106        xpc_exiting = 1;
1107
1108        xpc_arch_ops.disallow_all_hbs();   /*indicate we're deactivated */
1109
1110        for (partid = 0; partid < xp_max_npartitions; partid++) {
1111                part = &xpc_partitions[partid];
1112
1113                if (xpc_arch_ops.partition_engaged(partid) ||
1114                    part->act_state != XPC_P_AS_INACTIVE) {
1115                        xpc_arch_ops.request_partition_deactivation(part);
1116                        xpc_arch_ops.indicate_partition_disengaged(part);
1117                }
1118        }
1119
1120        /*
1121         * Though we requested that all other partitions deactivate from us,
1122         * we only wait until they've all disengaged or we've reached the
1123         * defined timelimit.
1124         *
1125         * Given that one iteration through the following while-loop takes
1126         * approximately 200 microseconds, calculate the #of loops to take
1127         * before bailing and the #of loops before printing a waiting message.
1128         */
1129        keep_waiting = xpc_disengage_timelimit * 1000 * 5;
1130        wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
1131
1132        while (1) {
1133                any_engaged = xpc_arch_ops.any_partition_engaged();
1134                if (!any_engaged) {
1135                        dev_info(xpc_part, "all partitions have deactivated\n");
1136                        break;
1137                }
1138
1139                if (!keep_waiting--) {
1140                        for (partid = 0; partid < xp_max_npartitions;
1141                             partid++) {
1142                                if (xpc_arch_ops.partition_engaged(partid)) {
1143                                        dev_info(xpc_part, "deactivate from "
1144                                                 "remote partition %d timed "
1145                                                 "out\n", partid);
1146                                }
1147                        }
1148                        break;
1149                }
1150
1151                if (!wait_to_print--) {
1152                        dev_info(xpc_part, "waiting for remote partitions to "
1153                                 "deactivate, timeout in %ld seconds\n",
1154                                 keep_waiting / (1000 * 5));
1155                        wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL *
1156                            1000 * 5;
1157                }
1158
1159                udelay(200);
1160        }
1161}
1162
1163/*
1164 * This function is called when the system is being restarted or halted due
1165 * to some sort of system failure. If this is the case we need to notify the
1166 * other partitions to disengage from all references to our memory.
1167 * This function can also be called when our heartbeater could be offlined
1168 * for a time. In this case we need to notify other partitions to not worry
1169 * about the lack of a heartbeat.
1170 */
1171static int
1172xpc_system_die(struct notifier_block *nb, unsigned long event, void *_die_args)
1173{
1174#ifdef CONFIG_IA64              /* !!! temporary kludge */
1175        switch (event) {
1176        case DIE_MACHINE_RESTART:
1177        case DIE_MACHINE_HALT:
1178                xpc_die_deactivate();
1179                break;
1180
1181        case DIE_KDEBUG_ENTER:
1182                /* Should lack of heartbeat be ignored by other partitions? */
1183                if (!xpc_kdebug_ignore)
1184                        break;
1185
1186                /* fall through */
1187        case DIE_MCA_MONARCH_ENTER:
1188        case DIE_INIT_MONARCH_ENTER:
1189                xpc_arch_ops.offline_heartbeat();
1190                break;
1191
1192        case DIE_KDEBUG_LEAVE:
1193                /* Is lack of heartbeat being ignored by other partitions? */
1194                if (!xpc_kdebug_ignore)
1195                        break;
1196
1197                /* fall through */
1198        case DIE_MCA_MONARCH_LEAVE:
1199        case DIE_INIT_MONARCH_LEAVE:
1200                xpc_arch_ops.online_heartbeat();
1201                break;
1202        }
1203#else
1204        struct die_args *die_args = _die_args;
1205
1206        switch (event) {
1207        case DIE_TRAP:
1208                if (die_args->trapnr == X86_TRAP_DF)
1209                        xpc_die_deactivate();
1210
1211                if (((die_args->trapnr == X86_TRAP_MF) ||
1212                     (die_args->trapnr == X86_TRAP_XF)) &&
1213                    !user_mode(die_args->regs))
1214                        xpc_die_deactivate();
1215
1216                break;
1217        case DIE_INT3:
1218        case DIE_DEBUG:
1219                break;
1220        case DIE_OOPS:
1221        case DIE_GPF:
1222        default:
1223                xpc_die_deactivate();
1224        }
1225#endif
1226
1227        return NOTIFY_DONE;
1228}
1229
1230int __init
1231xpc_init(void)
1232{
1233        int ret;
1234        struct task_struct *kthread;
1235
1236        dev_set_name(xpc_part, "part");
1237        dev_set_name(xpc_chan, "chan");
1238
1239        if (is_shub()) {
1240                /*
1241                 * The ia64-sn2 architecture supports at most 64 partitions.
1242                 * And the inability to unregister remote amos restricts us
1243                 * further to only support exactly 64 partitions on this
1244                 * architecture, no less.
1245                 */
1246                if (xp_max_npartitions != 64) {
1247                        dev_err(xpc_part, "max #of partitions not set to 64\n");
1248                        ret = -EINVAL;
1249                } else {
1250                        ret = xpc_init_sn2();
1251                }
1252
1253        } else if (is_uv()) {
1254                ret = xpc_init_uv();
1255
1256        } else {
1257                ret = -ENODEV;
1258        }
1259
1260        if (ret != 0)
1261                return ret;
1262
1263        ret = xpc_setup_partitions();
1264        if (ret != 0) {
1265                dev_err(xpc_part, "can't get memory for partition structure\n");
1266                goto out_1;
1267        }
1268
1269        xpc_sysctl = register_sysctl_table(xpc_sys_dir);
1270
1271        /*
1272         * Fill the partition reserved page with the information needed by
1273         * other partitions to discover we are alive and establish initial
1274         * communications.
1275         */
1276        ret = xpc_setup_rsvd_page();
1277        if (ret != 0) {
1278                dev_err(xpc_part, "can't setup our reserved page\n");
1279                goto out_2;
1280        }
1281
1282        /* add ourselves to the reboot_notifier_list */
1283        ret = register_reboot_notifier(&xpc_reboot_notifier);
1284        if (ret != 0)
1285                dev_warn(xpc_part, "can't register reboot notifier\n");
1286
1287        /* add ourselves to the die_notifier list */
1288        ret = register_die_notifier(&xpc_die_notifier);
1289        if (ret != 0)
1290                dev_warn(xpc_part, "can't register die notifier\n");
1291
1292        /*
1293         * The real work-horse behind xpc.  This processes incoming
1294         * interrupts and monitors remote heartbeats.
1295         */
1296        kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
1297        if (IS_ERR(kthread)) {
1298                dev_err(xpc_part, "failed while forking hb check thread\n");
1299                ret = -EBUSY;
1300                goto out_3;
1301        }
1302
1303        /*
1304         * Startup a thread that will attempt to discover other partitions to
1305         * activate based on info provided by SAL. This new thread is short
1306         * lived and will exit once discovery is complete.
1307         */
1308        kthread = kthread_run(xpc_initiate_discovery, NULL,
1309                              XPC_DISCOVERY_THREAD_NAME);
1310        if (IS_ERR(kthread)) {
1311                dev_err(xpc_part, "failed while forking discovery thread\n");
1312
1313                /* mark this new thread as a non-starter */
1314                complete(&xpc_discovery_exited);
1315
1316                xpc_do_exit(xpUnloading);
1317                return -EBUSY;
1318        }
1319
1320        /* set the interface to point at XPC's functions */
1321        xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
1322                          xpc_initiate_send, xpc_initiate_send_notify,
1323                          xpc_initiate_received, xpc_initiate_partid_to_nasids);
1324
1325        return 0;
1326
1327        /* initialization was not successful */
1328out_3:
1329        xpc_teardown_rsvd_page();
1330
1331        (void)unregister_die_notifier(&xpc_die_notifier);
1332        (void)unregister_reboot_notifier(&xpc_reboot_notifier);
1333out_2:
1334        if (xpc_sysctl)
1335                unregister_sysctl_table(xpc_sysctl);
1336
1337        xpc_teardown_partitions();
1338out_1:
1339        if (is_shub())
1340                xpc_exit_sn2();
1341        else if (is_uv())
1342                xpc_exit_uv();
1343        return ret;
1344}
1345
1346module_init(xpc_init);
1347
1348void __exit
1349xpc_exit(void)
1350{
1351        xpc_do_exit(xpUnloading);
1352}
1353
1354module_exit(xpc_exit);
1355
1356MODULE_AUTHOR("Silicon Graphics, Inc.");
1357MODULE_DESCRIPTION("Cross Partition Communication (XPC) support");
1358MODULE_LICENSE("GPL");
1359
1360module_param(xpc_hb_interval, int, 0);
1361MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between "
1362                 "heartbeat increments.");
1363
1364module_param(xpc_hb_check_interval, int, 0);
1365MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
1366                 "heartbeat checks.");
1367
1368module_param(xpc_disengage_timelimit, int, 0);
1369MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait "
1370                 "for disengage to complete.");
1371
1372module_param(xpc_kdebug_ignore, int, 0);
1373MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
1374                 "other partitions when dropping into kdebug.");
1375