linux/drivers/media/usb/dvb-usb/dibusb-common.c
<<
>>
Prefs
   1/* Common methods for dibusb-based-receivers.
   2 *
   3 * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
   4 *
   5 *      This program is free software; you can redistribute it and/or modify it
   6 *      under the terms of the GNU General Public License as published by the Free
   7 *      Software Foundation, version 2.
   8 *
   9 * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
  10 */
  11
  12#include "dibusb.h"
  13
  14/* Max transfer size done by I2C transfer functions */
  15#define MAX_XFER_SIZE  64
  16
  17static int debug;
  18module_param(debug, int, 0644);
  19MODULE_PARM_DESC(debug, "set debugging level (1=info (|-able))." DVB_USB_DEBUG_STATUS);
  20MODULE_LICENSE("GPL");
  21
  22#define deb_info(args...) dprintk(debug,0x01,args)
  23
  24/* common stuff used by the different dibusb modules */
  25int dibusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
  26{
  27        if (adap->priv != NULL) {
  28                struct dibusb_state *st = adap->priv;
  29                if (st->ops.fifo_ctrl != NULL)
  30                        if (st->ops.fifo_ctrl(adap->fe_adap[0].fe, onoff)) {
  31                                err("error while controlling the fifo of the demod.");
  32                                return -ENODEV;
  33                        }
  34        }
  35        return 0;
  36}
  37EXPORT_SYMBOL(dibusb_streaming_ctrl);
  38
  39int dibusb_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
  40{
  41        if (adap->priv != NULL) {
  42                struct dibusb_state *st = adap->priv;
  43                if (st->ops.pid_ctrl != NULL)
  44                        st->ops.pid_ctrl(adap->fe_adap[0].fe,
  45                                         index, pid, onoff);
  46        }
  47        return 0;
  48}
  49EXPORT_SYMBOL(dibusb_pid_filter);
  50
  51int dibusb_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
  52{
  53        if (adap->priv != NULL) {
  54                struct dibusb_state *st = adap->priv;
  55                if (st->ops.pid_parse != NULL)
  56                        if (st->ops.pid_parse(adap->fe_adap[0].fe, onoff) < 0)
  57                                err("could not handle pid_parser");
  58        }
  59        return 0;
  60}
  61EXPORT_SYMBOL(dibusb_pid_filter_ctrl);
  62
  63int dibusb_power_ctrl(struct dvb_usb_device *d, int onoff)
  64{
  65        u8 *b;
  66        int ret;
  67
  68        b = kmalloc(3, GFP_KERNEL);
  69        if (!b)
  70                return -ENOMEM;
  71
  72        b[0] = DIBUSB_REQ_SET_IOCTL;
  73        b[1] = DIBUSB_IOCTL_CMD_POWER_MODE;
  74        b[2] = onoff ? DIBUSB_IOCTL_POWER_WAKEUP : DIBUSB_IOCTL_POWER_SLEEP;
  75
  76        ret = dvb_usb_generic_write(d, b, 3);
  77
  78        kfree(b);
  79
  80        msleep(10);
  81
  82        return ret;
  83}
  84EXPORT_SYMBOL(dibusb_power_ctrl);
  85
  86int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
  87{
  88        int ret;
  89        u8 *b;
  90
  91        b = kmalloc(3, GFP_KERNEL);
  92        if (!b)
  93                return -ENOMEM;
  94
  95        if ((ret = dibusb_streaming_ctrl(adap,onoff)) < 0)
  96                goto ret;
  97
  98        if (onoff) {
  99                b[0] = DIBUSB_REQ_SET_STREAMING_MODE;
 100                b[1] = 0x00;
 101                ret = dvb_usb_generic_write(adap->dev, b, 2);
 102                if (ret  < 0)
 103                        goto ret;
 104        }
 105
 106        b[0] = DIBUSB_REQ_SET_IOCTL;
 107        b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM;
 108        ret = dvb_usb_generic_write(adap->dev, b, 3);
 109
 110ret:
 111        kfree(b);
 112        return ret;
 113}
 114EXPORT_SYMBOL(dibusb2_0_streaming_ctrl);
 115
 116int dibusb2_0_power_ctrl(struct dvb_usb_device *d, int onoff)
 117{
 118        u8 *b;
 119        int ret;
 120
 121        if (!onoff)
 122                return 0;
 123
 124        b = kmalloc(3, GFP_KERNEL);
 125        if (!b)
 126                return -ENOMEM;
 127
 128        b[0] = DIBUSB_REQ_SET_IOCTL;
 129        b[1] = DIBUSB_IOCTL_CMD_POWER_MODE;
 130        b[2] = DIBUSB_IOCTL_POWER_WAKEUP;
 131
 132        ret = dvb_usb_generic_write(d, b, 3);
 133
 134        kfree(b);
 135
 136        return ret;
 137}
 138EXPORT_SYMBOL(dibusb2_0_power_ctrl);
 139
 140static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr,
 141                          u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
 142{
 143        u8 *sndbuf;
 144        int ret, wo, len;
 145
 146        /* write only ? */
 147        wo = (rbuf == NULL || rlen == 0);
 148
 149        len = 2 + wlen + (wo ? 0 : 2);
 150
 151        sndbuf = kmalloc(MAX_XFER_SIZE, GFP_KERNEL);
 152        if (!sndbuf)
 153                return -ENOMEM;
 154
 155        if (4 + wlen > MAX_XFER_SIZE) {
 156                warn("i2c wr: len=%d is too big!\n", wlen);
 157                ret = -EOPNOTSUPP;
 158                goto ret;
 159        }
 160
 161        sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ;
 162        sndbuf[1] = (addr << 1) | (wo ? 0 : 1);
 163
 164        memcpy(&sndbuf[2], wbuf, wlen);
 165
 166        if (!wo) {
 167                sndbuf[wlen + 2] = (rlen >> 8) & 0xff;
 168                sndbuf[wlen + 3] = rlen & 0xff;
 169        }
 170
 171        ret = dvb_usb_generic_rw(d, sndbuf, len, rbuf, rlen, 0);
 172
 173ret:
 174        kfree(sndbuf);
 175        return ret;
 176}
 177
 178/*
 179 * I2C master xfer function
 180 */
 181static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
 182{
 183        struct dvb_usb_device *d = i2c_get_adapdata(adap);
 184        int i;
 185
 186        if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 187                return -EAGAIN;
 188
 189        for (i = 0; i < num; i++) {
 190                /* write/read request */
 191                if (i+1 < num && (msg[i].flags & I2C_M_RD) == 0
 192                                          && (msg[i+1].flags & I2C_M_RD)) {
 193                        if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,
 194                                                msg[i+1].buf,msg[i+1].len) < 0)
 195                                break;
 196                        i++;
 197                } else if ((msg[i].flags & I2C_M_RD) == 0) {
 198                        if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
 199                                break;
 200                } else if (msg[i].addr != 0x50) {
 201                        /* 0x50 is the address of the eeprom - we need to protect it
 202                         * from dibusb's bad i2c implementation: reads without
 203                         * writing the offset before are forbidden */
 204                        if (dibusb_i2c_msg(d, msg[i].addr, NULL, 0, msg[i].buf, msg[i].len) < 0)
 205                                break;
 206                }
 207        }
 208
 209        mutex_unlock(&d->i2c_mutex);
 210        return i;
 211}
 212
 213static u32 dibusb_i2c_func(struct i2c_adapter *adapter)
 214{
 215        return I2C_FUNC_I2C;
 216}
 217
 218struct i2c_algorithm dibusb_i2c_algo = {
 219        .master_xfer   = dibusb_i2c_xfer,
 220        .functionality = dibusb_i2c_func,
 221};
 222EXPORT_SYMBOL(dibusb_i2c_algo);
 223
 224int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val)
 225{
 226        u8 *buf;
 227        int rc;
 228
 229        buf = kmalloc(2, GFP_KERNEL);
 230        if (!buf)
 231                return -ENOMEM;
 232
 233        buf[0] = offs;
 234
 235        rc = dibusb_i2c_msg(d, 0x50, &buf[0], 1, &buf[1], 1);
 236        *val = buf[1];
 237        kfree(buf);
 238
 239        return rc;
 240}
 241EXPORT_SYMBOL(dibusb_read_eeprom_byte);
 242
 243/*
 244 * common remote control stuff
 245 */
 246struct rc_map_table rc_map_dibusb_table[] = {
 247        /* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
 248        { 0x0016, KEY_POWER },
 249        { 0x0010, KEY_MUTE },
 250        { 0x0003, KEY_1 },
 251        { 0x0001, KEY_2 },
 252        { 0x0006, KEY_3 },
 253        { 0x0009, KEY_4 },
 254        { 0x001d, KEY_5 },
 255        { 0x001f, KEY_6 },
 256        { 0x000d, KEY_7 },
 257        { 0x0019, KEY_8 },
 258        { 0x001b, KEY_9 },
 259        { 0x0015, KEY_0 },
 260        { 0x0005, KEY_CHANNELUP },
 261        { 0x0002, KEY_CHANNELDOWN },
 262        { 0x001e, KEY_VOLUMEUP },
 263        { 0x000a, KEY_VOLUMEDOWN },
 264        { 0x0011, KEY_RECORD },
 265        { 0x0017, KEY_FAVORITES }, /* Heart symbol - Channel list. */
 266        { 0x0014, KEY_PLAY },
 267        { 0x001a, KEY_STOP },
 268        { 0x0040, KEY_REWIND },
 269        { 0x0012, KEY_FASTFORWARD },
 270        { 0x000e, KEY_PREVIOUS }, /* Recall - Previous channel. */
 271        { 0x004c, KEY_PAUSE },
 272        { 0x004d, KEY_SCREEN }, /* Full screen mode. */
 273        { 0x0054, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
 274        /* additional keys TwinHan VisionPlus, the Artec seemingly not have */
 275        { 0x000c, KEY_CANCEL }, /* Cancel */
 276        { 0x001c, KEY_EPG }, /* EPG */
 277        { 0x0000, KEY_TAB }, /* Tab */
 278        { 0x0048, KEY_INFO }, /* Preview */
 279        { 0x0004, KEY_LIST }, /* RecordList */
 280        { 0x000f, KEY_TEXT }, /* Teletext */
 281        /* Key codes for the KWorld/ADSTech/JetWay remote. */
 282        { 0x8612, KEY_POWER },
 283        { 0x860f, KEY_SELECT }, /* source */
 284        { 0x860c, KEY_UNKNOWN }, /* scan */
 285        { 0x860b, KEY_EPG },
 286        { 0x8610, KEY_MUTE },
 287        { 0x8601, KEY_1 },
 288        { 0x8602, KEY_2 },
 289        { 0x8603, KEY_3 },
 290        { 0x8604, KEY_4 },
 291        { 0x8605, KEY_5 },
 292        { 0x8606, KEY_6 },
 293        { 0x8607, KEY_7 },
 294        { 0x8608, KEY_8 },
 295        { 0x8609, KEY_9 },
 296        { 0x860a, KEY_0 },
 297        { 0x8618, KEY_ZOOM },
 298        { 0x861c, KEY_UNKNOWN }, /* preview */
 299        { 0x8613, KEY_UNKNOWN }, /* snap */
 300        { 0x8600, KEY_UNDO },
 301        { 0x861d, KEY_RECORD },
 302        { 0x860d, KEY_STOP },
 303        { 0x860e, KEY_PAUSE },
 304        { 0x8616, KEY_PLAY },
 305        { 0x8611, KEY_BACK },
 306        { 0x8619, KEY_FORWARD },
 307        { 0x8614, KEY_UNKNOWN }, /* pip */
 308        { 0x8615, KEY_ESC },
 309        { 0x861a, KEY_UP },
 310        { 0x861e, KEY_DOWN },
 311        { 0x861f, KEY_LEFT },
 312        { 0x861b, KEY_RIGHT },
 313
 314        /* Key codes for the DiBcom MOD3000 remote. */
 315        { 0x8000, KEY_MUTE },
 316        { 0x8001, KEY_TEXT },
 317        { 0x8002, KEY_HOME },
 318        { 0x8003, KEY_POWER },
 319
 320        { 0x8004, KEY_RED },
 321        { 0x8005, KEY_GREEN },
 322        { 0x8006, KEY_YELLOW },
 323        { 0x8007, KEY_BLUE },
 324
 325        { 0x8008, KEY_DVD },
 326        { 0x8009, KEY_AUDIO },
 327        { 0x800a, KEY_IMAGES },      /* Pictures */
 328        { 0x800b, KEY_VIDEO },
 329
 330        { 0x800c, KEY_BACK },
 331        { 0x800d, KEY_UP },
 332        { 0x800e, KEY_RADIO },
 333        { 0x800f, KEY_EPG },
 334
 335        { 0x8010, KEY_LEFT },
 336        { 0x8011, KEY_OK },
 337        { 0x8012, KEY_RIGHT },
 338        { 0x8013, KEY_UNKNOWN },    /* SAP */
 339
 340        { 0x8014, KEY_TV },
 341        { 0x8015, KEY_DOWN },
 342        { 0x8016, KEY_MENU },       /* DVD Menu */
 343        { 0x8017, KEY_LAST },
 344
 345        { 0x8018, KEY_RECORD },
 346        { 0x8019, KEY_STOP },
 347        { 0x801a, KEY_PAUSE },
 348        { 0x801b, KEY_PLAY },
 349
 350        { 0x801c, KEY_PREVIOUS },
 351        { 0x801d, KEY_REWIND },
 352        { 0x801e, KEY_FASTFORWARD },
 353        { 0x801f, KEY_NEXT},
 354
 355        { 0x8040, KEY_1 },
 356        { 0x8041, KEY_2 },
 357        { 0x8042, KEY_3 },
 358        { 0x8043, KEY_CHANNELUP },
 359
 360        { 0x8044, KEY_4 },
 361        { 0x8045, KEY_5 },
 362        { 0x8046, KEY_6 },
 363        { 0x8047, KEY_CHANNELDOWN },
 364
 365        { 0x8048, KEY_7 },
 366        { 0x8049, KEY_8 },
 367        { 0x804a, KEY_9 },
 368        { 0x804b, KEY_VOLUMEUP },
 369
 370        { 0x804c, KEY_CLEAR },
 371        { 0x804d, KEY_0 },
 372        { 0x804e, KEY_ENTER },
 373        { 0x804f, KEY_VOLUMEDOWN },
 374};
 375EXPORT_SYMBOL(rc_map_dibusb_table);
 376
 377int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 378{
 379        u8 *buf;
 380        int ret;
 381
 382        buf = kmalloc(5, GFP_KERNEL);
 383        if (!buf)
 384                return -ENOMEM;
 385
 386        buf[0] = DIBUSB_REQ_POLL_REMOTE;
 387
 388        ret = dvb_usb_generic_rw(d, buf, 1, buf, 5, 0);
 389        if (ret < 0)
 390                goto ret;
 391
 392        dvb_usb_nec_rc_key_to_event(d, buf, event, state);
 393
 394        if (buf[0] != 0)
 395                deb_info("key: %*ph\n", 5, buf);
 396
 397ret:
 398        kfree(buf);
 399
 400        return ret;
 401}
 402EXPORT_SYMBOL(dibusb_rc_query);
 403