linux/net/mac80211/mesh.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2008, 2009 open80211s Ltd.
   3 * Copyright (C) 2018 Intel Corporation
   4 * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
   5 *             Javier Cardona <javier@cozybit.com>
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License version 2 as
   9 * published by the Free Software Foundation.
  10 */
  11
  12#include <linux/slab.h>
  13#include <asm/unaligned.h>
  14#include "ieee80211_i.h"
  15#include "mesh.h"
  16#include "driver-ops.h"
  17
  18static int mesh_allocated;
  19static struct kmem_cache *rm_cache;
  20
  21bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
  22{
  23        return (mgmt->u.action.u.mesh_action.action_code ==
  24                        WLAN_MESH_ACTION_HWMP_PATH_SELECTION);
  25}
  26
  27void ieee80211s_init(void)
  28{
  29        mesh_allocated = 1;
  30        rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
  31                                     0, 0, NULL);
  32}
  33
  34void ieee80211s_stop(void)
  35{
  36        if (!mesh_allocated)
  37                return;
  38        kmem_cache_destroy(rm_cache);
  39}
  40
  41static void ieee80211_mesh_housekeeping_timer(struct timer_list *t)
  42{
  43        struct ieee80211_sub_if_data *sdata =
  44                from_timer(sdata, t, u.mesh.housekeeping_timer);
  45        struct ieee80211_local *local = sdata->local;
  46        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  47
  48        set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
  49
  50        ieee80211_queue_work(&local->hw, &sdata->work);
  51}
  52
  53/**
  54 * mesh_matches_local - check if the config of a mesh point matches ours
  55 *
  56 * @sdata: local mesh subif
  57 * @ie: information elements of a management frame from the mesh peer
  58 *
  59 * This function checks if the mesh configuration of a mesh point matches the
  60 * local mesh configuration, i.e. if both nodes belong to the same mesh network.
  61 */
  62bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
  63                        struct ieee802_11_elems *ie)
  64{
  65        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  66        u32 basic_rates = 0;
  67        struct cfg80211_chan_def sta_chan_def;
  68        struct ieee80211_supported_band *sband;
  69
  70        /*
  71         * As support for each feature is added, check for matching
  72         * - On mesh config capabilities
  73         *   - Power Save Support En
  74         *   - Sync support enabled
  75         *   - Sync support active
  76         *   - Sync support required from peer
  77         *   - MDA enabled
  78         * - Power management control on fc
  79         */
  80        if (!(ifmsh->mesh_id_len == ie->mesh_id_len &&
  81             memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
  82             (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
  83             (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
  84             (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
  85             (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
  86             (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
  87                return false;
  88
  89        sband = ieee80211_get_sband(sdata);
  90        if (!sband)
  91                return false;
  92
  93        ieee80211_sta_get_rates(sdata, ie, sband->band,
  94                                &basic_rates);
  95
  96        if (sdata->vif.bss_conf.basic_rates != basic_rates)
  97                return false;
  98
  99        cfg80211_chandef_create(&sta_chan_def, sdata->vif.bss_conf.chandef.chan,
 100                                NL80211_CHAN_NO_HT);
 101        ieee80211_chandef_ht_oper(ie->ht_operation, &sta_chan_def);
 102        ieee80211_chandef_vht_oper(&sdata->local->hw,
 103                                   ie->vht_operation, ie->ht_operation,
 104                                   &sta_chan_def);
 105
 106        if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef,
 107                                         &sta_chan_def))
 108                return false;
 109
 110        return true;
 111}
 112
 113/**
 114 * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
 115 *
 116 * @ie: information elements of a management frame from the mesh peer
 117 */
 118bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
 119{
 120        return (ie->mesh_config->meshconf_cap &
 121                        IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
 122}
 123
 124/**
 125 * mesh_accept_plinks_update - update accepting_plink in local mesh beacons
 126 *
 127 * @sdata: mesh interface in which mesh beacons are going to be updated
 128 *
 129 * Returns: beacon changed flag if the beacon content changed.
 130 */
 131u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
 132{
 133        bool free_plinks;
 134        u32 changed = 0;
 135
 136        /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
 137         * the mesh interface might be able to establish plinks with peers that
 138         * are already on the table but are not on PLINK_ESTAB state. However,
 139         * in general the mesh interface is not accepting peer link requests
 140         * from new peers, and that must be reflected in the beacon
 141         */
 142        free_plinks = mesh_plink_availables(sdata);
 143
 144        if (free_plinks != sdata->u.mesh.accepting_plinks) {
 145                sdata->u.mesh.accepting_plinks = free_plinks;
 146                changed = BSS_CHANGED_BEACON;
 147        }
 148
 149        return changed;
 150}
 151
 152/*
 153 * mesh_sta_cleanup - clean up any mesh sta state
 154 *
 155 * @sta: mesh sta to clean up.
 156 */
 157void mesh_sta_cleanup(struct sta_info *sta)
 158{
 159        struct ieee80211_sub_if_data *sdata = sta->sdata;
 160        u32 changed = mesh_plink_deactivate(sta);
 161
 162        if (changed)
 163                ieee80211_mbss_info_change_notify(sdata, changed);
 164}
 165
 166int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
 167{
 168        int i;
 169
 170        sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
 171        if (!sdata->u.mesh.rmc)
 172                return -ENOMEM;
 173        sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
 174        for (i = 0; i < RMC_BUCKETS; i++)
 175                INIT_HLIST_HEAD(&sdata->u.mesh.rmc->bucket[i]);
 176        return 0;
 177}
 178
 179void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
 180{
 181        struct mesh_rmc *rmc = sdata->u.mesh.rmc;
 182        struct rmc_entry *p;
 183        struct hlist_node *n;
 184        int i;
 185
 186        if (!sdata->u.mesh.rmc)
 187                return;
 188
 189        for (i = 0; i < RMC_BUCKETS; i++) {
 190                hlist_for_each_entry_safe(p, n, &rmc->bucket[i], list) {
 191                        hlist_del(&p->list);
 192                        kmem_cache_free(rm_cache, p);
 193                }
 194        }
 195
 196        kfree(rmc);
 197        sdata->u.mesh.rmc = NULL;
 198}
 199
 200/**
 201 * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
 202 *
 203 * @sdata:      interface
 204 * @sa:         source address
 205 * @mesh_hdr:   mesh_header
 206 *
 207 * Returns: 0 if the frame is not in the cache, nonzero otherwise.
 208 *
 209 * Checks using the source address and the mesh sequence number if we have
 210 * received this frame lately. If the frame is not in the cache, it is added to
 211 * it.
 212 */
 213int mesh_rmc_check(struct ieee80211_sub_if_data *sdata,
 214                   const u8 *sa, struct ieee80211s_hdr *mesh_hdr)
 215{
 216        struct mesh_rmc *rmc = sdata->u.mesh.rmc;
 217        u32 seqnum = 0;
 218        int entries = 0;
 219        u8 idx;
 220        struct rmc_entry *p;
 221        struct hlist_node *n;
 222
 223        if (!rmc)
 224                return -1;
 225
 226        /* Don't care about endianness since only match matters */
 227        memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
 228        idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
 229        hlist_for_each_entry_safe(p, n, &rmc->bucket[idx], list) {
 230                ++entries;
 231                if (time_after(jiffies, p->exp_time) ||
 232                    entries == RMC_QUEUE_MAX_LEN) {
 233                        hlist_del(&p->list);
 234                        kmem_cache_free(rm_cache, p);
 235                        --entries;
 236                } else if ((seqnum == p->seqnum) && ether_addr_equal(sa, p->sa))
 237                        return -1;
 238        }
 239
 240        p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
 241        if (!p)
 242                return 0;
 243
 244        p->seqnum = seqnum;
 245        p->exp_time = jiffies + RMC_TIMEOUT;
 246        memcpy(p->sa, sa, ETH_ALEN);
 247        hlist_add_head(&p->list, &rmc->bucket[idx]);
 248        return 0;
 249}
 250
 251int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata,
 252                         struct sk_buff *skb)
 253{
 254        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 255        u8 *pos, neighbors;
 256        u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie);
 257        bool is_connected_to_gate = ifmsh->num_gates > 0 ||
 258                ifmsh->mshcfg.dot11MeshGateAnnouncementProtocol ||
 259                ifmsh->mshcfg.dot11MeshConnectedToMeshGate;
 260
 261        if (skb_tailroom(skb) < 2 + meshconf_len)
 262                return -ENOMEM;
 263
 264        pos = skb_put(skb, 2 + meshconf_len);
 265        *pos++ = WLAN_EID_MESH_CONFIG;
 266        *pos++ = meshconf_len;
 267
 268        /* save a pointer for quick updates in pre-tbtt */
 269        ifmsh->meshconf_offset = pos - skb->data;
 270
 271        /* Active path selection protocol ID */
 272        *pos++ = ifmsh->mesh_pp_id;
 273        /* Active path selection metric ID   */
 274        *pos++ = ifmsh->mesh_pm_id;
 275        /* Congestion control mode identifier */
 276        *pos++ = ifmsh->mesh_cc_id;
 277        /* Synchronization protocol identifier */
 278        *pos++ = ifmsh->mesh_sp_id;
 279        /* Authentication Protocol identifier */
 280        *pos++ = ifmsh->mesh_auth_id;
 281        /* Mesh Formation Info - number of neighbors */
 282        neighbors = atomic_read(&ifmsh->estab_plinks);
 283        neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS);
 284        *pos++ = (neighbors << 1) | is_connected_to_gate;
 285        /* Mesh capability */
 286        *pos = 0x00;
 287        *pos |= ifmsh->mshcfg.dot11MeshForwarding ?
 288                        IEEE80211_MESHCONF_CAPAB_FORWARDING : 0x00;
 289        *pos |= ifmsh->accepting_plinks ?
 290                        IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
 291        /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
 292        *pos |= ifmsh->ps_peers_deep_sleep ?
 293                        IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00;
 294        return 0;
 295}
 296
 297int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
 298{
 299        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 300        u8 *pos;
 301
 302        if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len)
 303                return -ENOMEM;
 304
 305        pos = skb_put(skb, 2 + ifmsh->mesh_id_len);
 306        *pos++ = WLAN_EID_MESH_ID;
 307        *pos++ = ifmsh->mesh_id_len;
 308        if (ifmsh->mesh_id_len)
 309                memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len);
 310
 311        return 0;
 312}
 313
 314static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data *sdata,
 315                                    struct sk_buff *skb)
 316{
 317        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 318        u8 *pos;
 319
 320        /* see IEEE802.11-2012 13.14.6 */
 321        if (ifmsh->ps_peers_light_sleep == 0 &&
 322            ifmsh->ps_peers_deep_sleep == 0 &&
 323            ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE)
 324                return 0;
 325
 326        if (skb_tailroom(skb) < 4)
 327                return -ENOMEM;
 328
 329        pos = skb_put(skb, 2 + 2);
 330        *pos++ = WLAN_EID_MESH_AWAKE_WINDOW;
 331        *pos++ = 2;
 332        put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos);
 333
 334        return 0;
 335}
 336
 337int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata,
 338                        struct sk_buff *skb)
 339{
 340        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 341        u8 offset, len;
 342        const u8 *data;
 343
 344        if (!ifmsh->ie || !ifmsh->ie_len)
 345                return 0;
 346
 347        /* fast-forward to vendor IEs */
 348        offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0);
 349
 350        if (offset < ifmsh->ie_len) {
 351                len = ifmsh->ie_len - offset;
 352                data = ifmsh->ie + offset;
 353                if (skb_tailroom(skb) < len)
 354                        return -ENOMEM;
 355                skb_put_data(skb, data, len);
 356        }
 357
 358        return 0;
 359}
 360
 361int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
 362{
 363        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 364        u8 len = 0;
 365        const u8 *data;
 366
 367        if (!ifmsh->ie || !ifmsh->ie_len)
 368                return 0;
 369
 370        /* find RSN IE */
 371        data = cfg80211_find_ie(WLAN_EID_RSN, ifmsh->ie, ifmsh->ie_len);
 372        if (!data)
 373                return 0;
 374
 375        len = data[1] + 2;
 376
 377        if (skb_tailroom(skb) < len)
 378                return -ENOMEM;
 379        skb_put_data(skb, data, len);
 380
 381        return 0;
 382}
 383
 384static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data *sdata,
 385                                 struct sk_buff *skb)
 386{
 387        struct ieee80211_chanctx_conf *chanctx_conf;
 388        struct ieee80211_channel *chan;
 389        u8 *pos;
 390
 391        if (skb_tailroom(skb) < 3)
 392                return -ENOMEM;
 393
 394        rcu_read_lock();
 395        chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 396        if (WARN_ON(!chanctx_conf)) {
 397                rcu_read_unlock();
 398                return -EINVAL;
 399        }
 400        chan = chanctx_conf->def.chan;
 401        rcu_read_unlock();
 402
 403        pos = skb_put(skb, 2 + 1);
 404        *pos++ = WLAN_EID_DS_PARAMS;
 405        *pos++ = 1;
 406        *pos++ = ieee80211_frequency_to_channel(chan->center_freq);
 407
 408        return 0;
 409}
 410
 411int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
 412                       struct sk_buff *skb)
 413{
 414        struct ieee80211_supported_band *sband;
 415        u8 *pos;
 416
 417        sband = ieee80211_get_sband(sdata);
 418        if (!sband)
 419                return -EINVAL;
 420
 421        if (!sband->ht_cap.ht_supported ||
 422            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 423            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 424            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 425                return 0;
 426
 427        if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
 428                return -ENOMEM;
 429
 430        pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
 431        ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
 432
 433        return 0;
 434}
 435
 436int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata,
 437                        struct sk_buff *skb)
 438{
 439        struct ieee80211_local *local = sdata->local;
 440        struct ieee80211_chanctx_conf *chanctx_conf;
 441        struct ieee80211_channel *channel;
 442        struct ieee80211_supported_band *sband;
 443        struct ieee80211_sta_ht_cap *ht_cap;
 444        u8 *pos;
 445
 446        rcu_read_lock();
 447        chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 448        if (WARN_ON(!chanctx_conf)) {
 449                rcu_read_unlock();
 450                return -EINVAL;
 451        }
 452        channel = chanctx_conf->def.chan;
 453        rcu_read_unlock();
 454
 455        sband = local->hw.wiphy->bands[channel->band];
 456        ht_cap = &sband->ht_cap;
 457
 458        if (!ht_cap->ht_supported ||
 459            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 460            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 461            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 462                return 0;
 463
 464        if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation))
 465                return -ENOMEM;
 466
 467        pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation));
 468        ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chandef,
 469                                   sdata->vif.bss_conf.ht_operation_mode,
 470                                   false);
 471
 472        return 0;
 473}
 474
 475int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata,
 476                        struct sk_buff *skb)
 477{
 478        struct ieee80211_supported_band *sband;
 479        u8 *pos;
 480
 481        sband = ieee80211_get_sband(sdata);
 482        if (!sband)
 483                return -EINVAL;
 484
 485        if (!sband->vht_cap.vht_supported ||
 486            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 487            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 488            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 489                return 0;
 490
 491        if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_cap))
 492                return -ENOMEM;
 493
 494        pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_cap));
 495        ieee80211_ie_build_vht_cap(pos, &sband->vht_cap, sband->vht_cap.cap);
 496
 497        return 0;
 498}
 499
 500int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata,
 501                         struct sk_buff *skb)
 502{
 503        struct ieee80211_local *local = sdata->local;
 504        struct ieee80211_chanctx_conf *chanctx_conf;
 505        struct ieee80211_channel *channel;
 506        struct ieee80211_supported_band *sband;
 507        struct ieee80211_sta_vht_cap *vht_cap;
 508        u8 *pos;
 509
 510        rcu_read_lock();
 511        chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 512        if (WARN_ON(!chanctx_conf)) {
 513                rcu_read_unlock();
 514                return -EINVAL;
 515        }
 516        channel = chanctx_conf->def.chan;
 517        rcu_read_unlock();
 518
 519        sband = local->hw.wiphy->bands[channel->band];
 520        vht_cap = &sband->vht_cap;
 521
 522        if (!vht_cap->vht_supported ||
 523            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 524            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 525            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 526                return 0;
 527
 528        if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_operation))
 529                return -ENOMEM;
 530
 531        pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_operation));
 532        ieee80211_ie_build_vht_oper(pos, vht_cap,
 533                                    &sdata->vif.bss_conf.chandef);
 534
 535        return 0;
 536}
 537
 538static void ieee80211_mesh_path_timer(struct timer_list *t)
 539{
 540        struct ieee80211_sub_if_data *sdata =
 541                from_timer(sdata, t, u.mesh.mesh_path_timer);
 542
 543        ieee80211_queue_work(&sdata->local->hw, &sdata->work);
 544}
 545
 546static void ieee80211_mesh_path_root_timer(struct timer_list *t)
 547{
 548        struct ieee80211_sub_if_data *sdata =
 549                from_timer(sdata, t, u.mesh.mesh_path_root_timer);
 550        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 551
 552        set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
 553
 554        ieee80211_queue_work(&sdata->local->hw, &sdata->work);
 555}
 556
 557void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
 558{
 559        if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)
 560                set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
 561        else {
 562                clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
 563                /* stop running timer */
 564                del_timer_sync(&ifmsh->mesh_path_root_timer);
 565        }
 566}
 567
 568/**
 569 * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
 570 * @hdr:        802.11 frame header
 571 * @fc:         frame control field
 572 * @meshda:     destination address in the mesh
 573 * @meshsa:     source address address in the mesh.  Same as TA, as frame is
 574 *              locally originated.
 575 *
 576 * Return the length of the 802.11 (does not include a mesh control header)
 577 */
 578int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
 579                                  const u8 *meshda, const u8 *meshsa)
 580{
 581        if (is_multicast_ether_addr(meshda)) {
 582                *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
 583                /* DA TA SA */
 584                memcpy(hdr->addr1, meshda, ETH_ALEN);
 585                memcpy(hdr->addr2, meshsa, ETH_ALEN);
 586                memcpy(hdr->addr3, meshsa, ETH_ALEN);
 587                return 24;
 588        } else {
 589                *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
 590                /* RA TA DA SA */
 591                eth_zero_addr(hdr->addr1);   /* RA is resolved later */
 592                memcpy(hdr->addr2, meshsa, ETH_ALEN);
 593                memcpy(hdr->addr3, meshda, ETH_ALEN);
 594                memcpy(hdr->addr4, meshsa, ETH_ALEN);
 595                return 30;
 596        }
 597}
 598
 599/**
 600 * ieee80211_new_mesh_header - create a new mesh header
 601 * @sdata:      mesh interface to be used
 602 * @meshhdr:    uninitialized mesh header
 603 * @addr4or5:   1st address in the ae header, which may correspond to address 4
 604 *              (if addr6 is NULL) or address 5 (if addr6 is present). It may
 605 *              be NULL.
 606 * @addr6:      2nd address in the ae header, which corresponds to addr6 of the
 607 *              mesh frame
 608 *
 609 * Return the header length.
 610 */
 611unsigned int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata,
 612                                       struct ieee80211s_hdr *meshhdr,
 613                                       const char *addr4or5, const char *addr6)
 614{
 615        if (WARN_ON(!addr4or5 && addr6))
 616                return 0;
 617
 618        memset(meshhdr, 0, sizeof(*meshhdr));
 619
 620        meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
 621
 622        /* FIXME: racy -- TX on multiple queues can be concurrent */
 623        put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
 624        sdata->u.mesh.mesh_seqnum++;
 625
 626        if (addr4or5 && !addr6) {
 627                meshhdr->flags |= MESH_FLAGS_AE_A4;
 628                memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
 629                return 2 * ETH_ALEN;
 630        } else if (addr4or5 && addr6) {
 631                meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
 632                memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
 633                memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
 634                return 3 * ETH_ALEN;
 635        }
 636
 637        return ETH_ALEN;
 638}
 639
 640static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata)
 641{
 642        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 643        u32 changed;
 644
 645        if (ifmsh->mshcfg.plink_timeout > 0)
 646                ieee80211_sta_expire(sdata, ifmsh->mshcfg.plink_timeout * HZ);
 647        mesh_path_expire(sdata);
 648
 649        changed = mesh_accept_plinks_update(sdata);
 650        ieee80211_mbss_info_change_notify(sdata, changed);
 651
 652        mod_timer(&ifmsh->housekeeping_timer,
 653                  round_jiffies(jiffies +
 654                                IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
 655}
 656
 657static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
 658{
 659        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 660        u32 interval;
 661
 662        mesh_path_tx_root_frame(sdata);
 663
 664        if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN)
 665                interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval;
 666        else
 667                interval = ifmsh->mshcfg.dot11MeshHWMProotInterval;
 668
 669        mod_timer(&ifmsh->mesh_path_root_timer,
 670                  round_jiffies(TU_TO_EXP_TIME(interval)));
 671}
 672
 673static int
 674ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
 675{
 676        struct beacon_data *bcn;
 677        int head_len, tail_len;
 678        struct sk_buff *skb;
 679        struct ieee80211_mgmt *mgmt;
 680        struct ieee80211_chanctx_conf *chanctx_conf;
 681        struct mesh_csa_settings *csa;
 682        enum nl80211_band band;
 683        u8 *pos;
 684        struct ieee80211_sub_if_data *sdata;
 685        int hdr_len = offsetofend(struct ieee80211_mgmt, u.beacon);
 686
 687        sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh);
 688        rcu_read_lock();
 689        chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 690        band = chanctx_conf->def.chan->band;
 691        rcu_read_unlock();
 692
 693        head_len = hdr_len +
 694                   2 + /* NULL SSID */
 695                   /* Channel Switch Announcement */
 696                   2 + sizeof(struct ieee80211_channel_sw_ie) +
 697                   /* Mesh Channel Switch Parameters */
 698                   2 + sizeof(struct ieee80211_mesh_chansw_params_ie) +
 699                   /* Channel Switch Wrapper + Wide Bandwidth CSA IE */
 700                   2 + 2 + sizeof(struct ieee80211_wide_bw_chansw_ie) +
 701                   2 + sizeof(struct ieee80211_sec_chan_offs_ie) +
 702                   2 + 8 + /* supported rates */
 703                   2 + 3; /* DS params */
 704        tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
 705                   2 + sizeof(struct ieee80211_ht_cap) +
 706                   2 + sizeof(struct ieee80211_ht_operation) +
 707                   2 + ifmsh->mesh_id_len +
 708                   2 + sizeof(struct ieee80211_meshconf_ie) +
 709                   2 + sizeof(__le16) + /* awake window */
 710                   2 + sizeof(struct ieee80211_vht_cap) +
 711                   2 + sizeof(struct ieee80211_vht_operation) +
 712                   ifmsh->ie_len;
 713
 714        bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL);
 715        /* need an skb for IE builders to operate on */
 716        skb = dev_alloc_skb(max(head_len, tail_len));
 717
 718        if (!bcn || !skb)
 719                goto out_free;
 720
 721        /*
 722         * pointers go into the block we allocated,
 723         * memory is | beacon_data | head | tail |
 724         */
 725        bcn->head = ((u8 *) bcn) + sizeof(*bcn);
 726
 727        /* fill in the head */
 728        mgmt = skb_put_zero(skb, hdr_len);
 729        mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 730                                          IEEE80211_STYPE_BEACON);
 731        eth_broadcast_addr(mgmt->da);
 732        memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
 733        memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
 734        ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt);
 735        mgmt->u.beacon.beacon_int =
 736                cpu_to_le16(sdata->vif.bss_conf.beacon_int);
 737        mgmt->u.beacon.capab_info |= cpu_to_le16(
 738                sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0);
 739
 740        pos = skb_put(skb, 2);
 741        *pos++ = WLAN_EID_SSID;
 742        *pos++ = 0x0;
 743
 744        rcu_read_lock();
 745        csa = rcu_dereference(ifmsh->csa);
 746        if (csa) {
 747                enum nl80211_channel_type ct;
 748                struct cfg80211_chan_def *chandef;
 749                int ie_len = 2 + sizeof(struct ieee80211_channel_sw_ie) +
 750                             2 + sizeof(struct ieee80211_mesh_chansw_params_ie);
 751
 752                pos = skb_put_zero(skb, ie_len);
 753                *pos++ = WLAN_EID_CHANNEL_SWITCH;
 754                *pos++ = 3;
 755                *pos++ = 0x0;
 756                *pos++ = ieee80211_frequency_to_channel(
 757                                csa->settings.chandef.chan->center_freq);
 758                bcn->csa_current_counter = csa->settings.count;
 759                bcn->csa_counter_offsets[0] = hdr_len + 6;
 760                *pos++ = csa->settings.count;
 761                *pos++ = WLAN_EID_CHAN_SWITCH_PARAM;
 762                *pos++ = 6;
 763                if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) {
 764                        *pos++ = ifmsh->mshcfg.dot11MeshTTL;
 765                        *pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
 766                } else {
 767                        *pos++ = ifmsh->chsw_ttl;
 768                }
 769                *pos++ |= csa->settings.block_tx ?
 770                          WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00;
 771                put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos);
 772                pos += 2;
 773                put_unaligned_le16(ifmsh->pre_value, pos);
 774                pos += 2;
 775
 776                switch (csa->settings.chandef.width) {
 777                case NL80211_CHAN_WIDTH_40:
 778                        ie_len = 2 + sizeof(struct ieee80211_sec_chan_offs_ie);
 779                        pos = skb_put_zero(skb, ie_len);
 780
 781                        *pos++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET; /* EID */
 782                        *pos++ = 1;                                 /* len */
 783                        ct = cfg80211_get_chandef_type(&csa->settings.chandef);
 784                        if (ct == NL80211_CHAN_HT40PLUS)
 785                                *pos++ = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
 786                        else
 787                                *pos++ = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
 788                        break;
 789                case NL80211_CHAN_WIDTH_80:
 790                case NL80211_CHAN_WIDTH_80P80:
 791                case NL80211_CHAN_WIDTH_160:
 792                        /* Channel Switch Wrapper + Wide Bandwidth CSA IE */
 793                        ie_len = 2 + 2 +
 794                                 sizeof(struct ieee80211_wide_bw_chansw_ie);
 795                        pos = skb_put_zero(skb, ie_len);
 796
 797                        *pos++ = WLAN_EID_CHANNEL_SWITCH_WRAPPER; /* EID */
 798                        *pos++ = 5;                               /* len */
 799                        /* put sub IE */
 800                        chandef = &csa->settings.chandef;
 801                        ieee80211_ie_build_wide_bw_cs(pos, chandef);
 802                        break;
 803                default:
 804                        break;
 805                }
 806        }
 807        rcu_read_unlock();
 808
 809        if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
 810            mesh_add_ds_params_ie(sdata, skb))
 811                goto out_free;
 812
 813        bcn->head_len = skb->len;
 814        memcpy(bcn->head, skb->data, bcn->head_len);
 815
 816        /* now the tail */
 817        skb_trim(skb, 0);
 818        bcn->tail = bcn->head + bcn->head_len;
 819
 820        if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
 821            mesh_add_rsn_ie(sdata, skb) ||
 822            mesh_add_ht_cap_ie(sdata, skb) ||
 823            mesh_add_ht_oper_ie(sdata, skb) ||
 824            mesh_add_meshid_ie(sdata, skb) ||
 825            mesh_add_meshconf_ie(sdata, skb) ||
 826            mesh_add_awake_window_ie(sdata, skb) ||
 827            mesh_add_vht_cap_ie(sdata, skb) ||
 828            mesh_add_vht_oper_ie(sdata, skb) ||
 829            mesh_add_vendor_ies(sdata, skb))
 830                goto out_free;
 831
 832        bcn->tail_len = skb->len;
 833        memcpy(bcn->tail, skb->data, bcn->tail_len);
 834        bcn->meshconf = (struct ieee80211_meshconf_ie *)
 835                                        (bcn->tail + ifmsh->meshconf_offset);
 836
 837        dev_kfree_skb(skb);
 838        rcu_assign_pointer(ifmsh->beacon, bcn);
 839        return 0;
 840out_free:
 841        kfree(bcn);
 842        dev_kfree_skb(skb);
 843        return -ENOMEM;
 844}
 845
 846static int
 847ieee80211_mesh_rebuild_beacon(struct ieee80211_sub_if_data *sdata)
 848{
 849        struct beacon_data *old_bcn;
 850        int ret;
 851
 852        old_bcn = rcu_dereference_protected(sdata->u.mesh.beacon,
 853                                            lockdep_is_held(&sdata->wdev.mtx));
 854        ret = ieee80211_mesh_build_beacon(&sdata->u.mesh);
 855        if (ret)
 856                /* just reuse old beacon */
 857                return ret;
 858
 859        if (old_bcn)
 860                kfree_rcu(old_bcn, rcu_head);
 861        return 0;
 862}
 863
 864void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 865                                       u32 changed)
 866{
 867        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 868        unsigned long bits = changed;
 869        u32 bit;
 870
 871        if (!bits)
 872                return;
 873
 874        /* if we race with running work, worst case this work becomes a noop */
 875        for_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE)
 876                set_bit(bit, &ifmsh->mbss_changed);
 877        set_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags);
 878        ieee80211_queue_work(&sdata->local->hw, &sdata->work);
 879}
 880
 881int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 882{
 883        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 884        struct ieee80211_local *local = sdata->local;
 885        u32 changed = BSS_CHANGED_BEACON |
 886                      BSS_CHANGED_BEACON_ENABLED |
 887                      BSS_CHANGED_HT |
 888                      BSS_CHANGED_BASIC_RATES |
 889                      BSS_CHANGED_BEACON_INT |
 890                      BSS_CHANGED_MCAST_RATE;
 891
 892        local->fif_other_bss++;
 893        /* mesh ifaces must set allmulti to forward mcast traffic */
 894        atomic_inc(&local->iff_allmultis);
 895        ieee80211_configure_filter(local);
 896
 897        ifmsh->mesh_cc_id = 0;  /* Disabled */
 898        /* register sync ops from extensible synchronization framework */
 899        ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id);
 900        ifmsh->sync_offset_clockdrift_max = 0;
 901        set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
 902        ieee80211_mesh_root_setup(ifmsh);
 903        ieee80211_queue_work(&local->hw, &sdata->work);
 904        sdata->vif.bss_conf.ht_operation_mode =
 905                                ifmsh->mshcfg.ht_opmode;
 906        sdata->vif.bss_conf.enable_beacon = true;
 907
 908        changed |= ieee80211_mps_local_status_update(sdata);
 909
 910        if (ieee80211_mesh_build_beacon(ifmsh)) {
 911                ieee80211_stop_mesh(sdata);
 912                return -ENOMEM;
 913        }
 914
 915        ieee80211_recalc_dtim(local, sdata);
 916        ieee80211_bss_info_change_notify(sdata, changed);
 917
 918        netif_carrier_on(sdata->dev);
 919        return 0;
 920}
 921
 922void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 923{
 924        struct ieee80211_local *local = sdata->local;
 925        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 926        struct beacon_data *bcn;
 927
 928        netif_carrier_off(sdata->dev);
 929
 930        /* flush STAs and mpaths on this iface */
 931        sta_info_flush(sdata);
 932        mesh_path_flush_by_iface(sdata);
 933
 934        /* stop the beacon */
 935        ifmsh->mesh_id_len = 0;
 936        sdata->vif.bss_conf.enable_beacon = false;
 937        clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
 938        ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
 939
 940        /* remove beacon */
 941        bcn = rcu_dereference_protected(ifmsh->beacon,
 942                                        lockdep_is_held(&sdata->wdev.mtx));
 943        RCU_INIT_POINTER(ifmsh->beacon, NULL);
 944        kfree_rcu(bcn, rcu_head);
 945
 946        /* free all potentially still buffered group-addressed frames */
 947        local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf);
 948        skb_queue_purge(&ifmsh->ps.bc_buf);
 949
 950        del_timer_sync(&sdata->u.mesh.housekeeping_timer);
 951        del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
 952        del_timer_sync(&sdata->u.mesh.mesh_path_timer);
 953
 954        /* clear any mesh work (for next join) we may have accrued */
 955        ifmsh->wrkq_flags = 0;
 956        ifmsh->mbss_changed = 0;
 957
 958        local->fif_other_bss--;
 959        atomic_dec(&local->iff_allmultis);
 960        ieee80211_configure_filter(local);
 961}
 962
 963static void ieee80211_mesh_csa_mark_radar(struct ieee80211_sub_if_data *sdata)
 964{
 965        int err;
 966
 967        /* if the current channel is a DFS channel, mark the channel as
 968         * unavailable.
 969         */
 970        err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy,
 971                                            &sdata->vif.bss_conf.chandef,
 972                                            NL80211_IFTYPE_MESH_POINT);
 973        if (err > 0)
 974                cfg80211_radar_event(sdata->local->hw.wiphy,
 975                                     &sdata->vif.bss_conf.chandef, GFP_ATOMIC);
 976}
 977
 978static bool
 979ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
 980                                 struct ieee802_11_elems *elems, bool beacon)
 981{
 982        struct cfg80211_csa_settings params;
 983        struct ieee80211_csa_ie csa_ie;
 984        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 985        struct ieee80211_supported_band *sband;
 986        int err;
 987        u32 sta_flags;
 988
 989        sdata_assert_lock(sdata);
 990
 991        sband = ieee80211_get_sband(sdata);
 992        if (!sband)
 993                return false;
 994
 995        sta_flags = 0;
 996        switch (sdata->vif.bss_conf.chandef.width) {
 997        case NL80211_CHAN_WIDTH_20_NOHT:
 998                sta_flags |= IEEE80211_STA_DISABLE_HT;
 999                /* fall through */
1000        case NL80211_CHAN_WIDTH_20:
1001                sta_flags |= IEEE80211_STA_DISABLE_40MHZ;
1002                /* fall through */
1003        case NL80211_CHAN_WIDTH_40:
1004                sta_flags |= IEEE80211_STA_DISABLE_VHT;
1005                break;
1006        default:
1007                break;
1008        }
1009
1010        memset(&params, 0, sizeof(params));
1011        err = ieee80211_parse_ch_switch_ie(sdata, elems, sband->band,
1012                                           sta_flags, sdata->vif.addr,
1013                                           &csa_ie);
1014        if (err < 0)
1015                return false;
1016        if (err)
1017                return false;
1018
1019        /* Mark the channel unavailable if the reason for the switch is
1020         * regulatory.
1021         */
1022        if (csa_ie.reason_code == WLAN_REASON_MESH_CHAN_REGULATORY)
1023                ieee80211_mesh_csa_mark_radar(sdata);
1024
1025        params.chandef = csa_ie.chandef;
1026        params.count = csa_ie.count;
1027
1028        if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, &params.chandef,
1029                                     IEEE80211_CHAN_DISABLED) ||
1030            !cfg80211_reg_can_beacon(sdata->local->hw.wiphy, &params.chandef,
1031                                     NL80211_IFTYPE_MESH_POINT)) {
1032                sdata_info(sdata,
1033                           "mesh STA %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
1034                           sdata->vif.addr,
1035                           params.chandef.chan->center_freq,
1036                           params.chandef.width,
1037                           params.chandef.center_freq1,
1038                           params.chandef.center_freq2);
1039                return false;
1040        }
1041
1042        err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy,
1043                                            &params.chandef,
1044                                            NL80211_IFTYPE_MESH_POINT);
1045        if (err < 0)
1046                return false;
1047        if (err > 0 && !ifmsh->userspace_handles_dfs) {
1048                sdata_info(sdata,
1049                           "mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
1050                           sdata->vif.addr,
1051                           params.chandef.chan->center_freq,
1052                           params.chandef.width,
1053                           params.chandef.center_freq1,
1054                           params.chandef.center_freq2);
1055                return false;
1056        }
1057
1058        params.radar_required = err;
1059
1060        if (cfg80211_chandef_identical(&params.chandef,
1061                                       &sdata->vif.bss_conf.chandef)) {
1062                mcsa_dbg(sdata,
1063                         "received csa with an identical chandef, ignoring\n");
1064                return true;
1065        }
1066
1067        mcsa_dbg(sdata,
1068                 "received channel switch announcement to go to channel %d MHz\n",
1069                 params.chandef.chan->center_freq);
1070
1071        params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT;
1072        if (beacon) {
1073                ifmsh->chsw_ttl = csa_ie.ttl - 1;
1074                if (ifmsh->pre_value >= csa_ie.pre_value)
1075                        return false;
1076                ifmsh->pre_value = csa_ie.pre_value;
1077        }
1078
1079        if (ifmsh->chsw_ttl >= ifmsh->mshcfg.dot11MeshTTL)
1080                return false;
1081
1082        ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER;
1083
1084        if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev,
1085                                     &params) < 0)
1086                return false;
1087
1088        return true;
1089}
1090
1091static void
1092ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata,
1093                            struct ieee80211_mgmt *mgmt, size_t len)
1094{
1095        struct ieee80211_local *local = sdata->local;
1096        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1097        struct sk_buff *presp;
1098        struct beacon_data *bcn;
1099        struct ieee80211_mgmt *hdr;
1100        struct ieee802_11_elems elems;
1101        size_t baselen;
1102        u8 *pos;
1103
1104        pos = mgmt->u.probe_req.variable;
1105        baselen = (u8 *) pos - (u8 *) mgmt;
1106        if (baselen > len)
1107                return;
1108
1109        ieee802_11_parse_elems(pos, len - baselen, false, &elems);
1110
1111        if (!elems.mesh_id)
1112                return;
1113
1114        /* 802.11-2012 10.1.4.3.2 */
1115        if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
1116             !is_broadcast_ether_addr(mgmt->da)) ||
1117            elems.ssid_len != 0)
1118                return;
1119
1120        if (elems.mesh_id_len != 0 &&
1121            (elems.mesh_id_len != ifmsh->mesh_id_len ||
1122             memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len)))
1123                return;
1124
1125        rcu_read_lock();
1126        bcn = rcu_dereference(ifmsh->beacon);
1127
1128        if (!bcn)
1129                goto out;
1130
1131        presp = dev_alloc_skb(local->tx_headroom +
1132                              bcn->head_len + bcn->tail_len);
1133        if (!presp)
1134                goto out;
1135
1136        skb_reserve(presp, local->tx_headroom);
1137        skb_put_data(presp, bcn->head, bcn->head_len);
1138        skb_put_data(presp, bcn->tail, bcn->tail_len);
1139        hdr = (struct ieee80211_mgmt *) presp->data;
1140        hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1141                                         IEEE80211_STYPE_PROBE_RESP);
1142        memcpy(hdr->da, mgmt->sa, ETH_ALEN);
1143        IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1144        ieee80211_tx_skb(sdata, presp);
1145out:
1146        rcu_read_unlock();
1147}
1148
1149static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
1150                                        u16 stype,
1151                                        struct ieee80211_mgmt *mgmt,
1152                                        size_t len,
1153                                        struct ieee80211_rx_status *rx_status)
1154{
1155        struct ieee80211_local *local = sdata->local;
1156        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1157        struct ieee802_11_elems elems;
1158        struct ieee80211_channel *channel;
1159        size_t baselen;
1160        int freq;
1161        enum nl80211_band band = rx_status->band;
1162
1163        /* ignore ProbeResp to foreign address */
1164        if (stype == IEEE80211_STYPE_PROBE_RESP &&
1165            !ether_addr_equal(mgmt->da, sdata->vif.addr))
1166                return;
1167
1168        baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
1169        if (baselen > len)
1170                return;
1171
1172        ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
1173                               false, &elems);
1174
1175        /* ignore non-mesh or secure / unsecure mismatch */
1176        if ((!elems.mesh_id || !elems.mesh_config) ||
1177            (elems.rsn && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) ||
1178            (!elems.rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE))
1179                return;
1180
1181        if (elems.ds_params)
1182                freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
1183        else
1184                freq = rx_status->freq;
1185
1186        channel = ieee80211_get_channel(local->hw.wiphy, freq);
1187
1188        if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
1189                return;
1190
1191        if (mesh_matches_local(sdata, &elems)) {
1192                mpl_dbg(sdata, "rssi_threshold=%d,rx_status->signal=%d\n",
1193                        sdata->u.mesh.mshcfg.rssi_threshold, rx_status->signal);
1194                if (!sdata->u.mesh.user_mpm ||
1195                    sdata->u.mesh.mshcfg.rssi_threshold == 0 ||
1196                    sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal)
1197                        mesh_neighbour_update(sdata, mgmt->sa, &elems,
1198                                              rx_status);
1199        }
1200
1201        if (ifmsh->sync_ops)
1202                ifmsh->sync_ops->rx_bcn_presp(sdata,
1203                        stype, mgmt, &elems, rx_status);
1204
1205        if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
1206            !sdata->vif.csa_active)
1207                ieee80211_mesh_process_chnswitch(sdata, &elems, true);
1208}
1209
1210int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
1211{
1212        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1213        struct mesh_csa_settings *tmp_csa_settings;
1214        int ret = 0;
1215        int changed = 0;
1216
1217        /* Reset the TTL value and Initiator flag */
1218        ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
1219        ifmsh->chsw_ttl = 0;
1220
1221        /* Remove the CSA and MCSP elements from the beacon */
1222        tmp_csa_settings = rcu_dereference(ifmsh->csa);
1223        RCU_INIT_POINTER(ifmsh->csa, NULL);
1224        if (tmp_csa_settings)
1225                kfree_rcu(tmp_csa_settings, rcu_head);
1226        ret = ieee80211_mesh_rebuild_beacon(sdata);
1227        if (ret)
1228                return -EINVAL;
1229
1230        changed |= BSS_CHANGED_BEACON;
1231
1232        mcsa_dbg(sdata, "complete switching to center freq %d MHz",
1233                 sdata->vif.bss_conf.chandef.chan->center_freq);
1234        return changed;
1235}
1236
1237int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
1238                              struct cfg80211_csa_settings *csa_settings)
1239{
1240        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1241        struct mesh_csa_settings *tmp_csa_settings;
1242        int ret = 0;
1243
1244        tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings),
1245                                   GFP_ATOMIC);
1246        if (!tmp_csa_settings)
1247                return -ENOMEM;
1248
1249        memcpy(&tmp_csa_settings->settings, csa_settings,
1250               sizeof(struct cfg80211_csa_settings));
1251
1252        rcu_assign_pointer(ifmsh->csa, tmp_csa_settings);
1253
1254        ret = ieee80211_mesh_rebuild_beacon(sdata);
1255        if (ret) {
1256                tmp_csa_settings = rcu_dereference(ifmsh->csa);
1257                RCU_INIT_POINTER(ifmsh->csa, NULL);
1258                kfree_rcu(tmp_csa_settings, rcu_head);
1259                return ret;
1260        }
1261
1262        return BSS_CHANGED_BEACON;
1263}
1264
1265static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata,
1266                               struct ieee80211_mgmt *mgmt, size_t len,
1267                               struct ieee802_11_elems *elems)
1268{
1269        struct ieee80211_mgmt *mgmt_fwd;
1270        struct sk_buff *skb;
1271        struct ieee80211_local *local = sdata->local;
1272
1273        skb = dev_alloc_skb(local->tx_headroom + len);
1274        if (!skb)
1275                return -ENOMEM;
1276        skb_reserve(skb, local->tx_headroom);
1277        mgmt_fwd = skb_put(skb, len);
1278
1279        elems->mesh_chansw_params_ie->mesh_ttl--;
1280        elems->mesh_chansw_params_ie->mesh_flags &=
1281                ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
1282
1283        memcpy(mgmt_fwd, mgmt, len);
1284        eth_broadcast_addr(mgmt_fwd->da);
1285        memcpy(mgmt_fwd->sa, sdata->vif.addr, ETH_ALEN);
1286        memcpy(mgmt_fwd->bssid, sdata->vif.addr, ETH_ALEN);
1287
1288        ieee80211_tx_skb(sdata, skb);
1289        return 0;
1290}
1291
1292static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
1293                              struct ieee80211_mgmt *mgmt, size_t len)
1294{
1295        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1296        struct ieee802_11_elems elems;
1297        u16 pre_value;
1298        bool fwd_csa = true;
1299        size_t baselen;
1300        u8 *pos;
1301
1302        if (mgmt->u.action.u.measurement.action_code !=
1303            WLAN_ACTION_SPCT_CHL_SWITCH)
1304                return;
1305
1306        pos = mgmt->u.action.u.chan_switch.variable;
1307        baselen = offsetof(struct ieee80211_mgmt,
1308                           u.action.u.chan_switch.variable);
1309        ieee802_11_parse_elems(pos, len - baselen, true, &elems);
1310
1311        ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl;
1312        if (!--ifmsh->chsw_ttl)
1313                fwd_csa = false;
1314
1315        pre_value = le16_to_cpu(elems.mesh_chansw_params_ie->mesh_pre_value);
1316        if (ifmsh->pre_value >= pre_value)
1317                return;
1318
1319        ifmsh->pre_value = pre_value;
1320
1321        if (!sdata->vif.csa_active &&
1322            !ieee80211_mesh_process_chnswitch(sdata, &elems, false)) {
1323                mcsa_dbg(sdata, "Failed to process CSA action frame");
1324                return;
1325        }
1326
1327        /* forward or re-broadcast the CSA frame */
1328        if (fwd_csa) {
1329                if (mesh_fwd_csa_frame(sdata, mgmt, len, &elems) < 0)
1330                        mcsa_dbg(sdata, "Failed to forward the CSA frame");
1331        }
1332}
1333
1334static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
1335                                          struct ieee80211_mgmt *mgmt,
1336                                          size_t len,
1337                                          struct ieee80211_rx_status *rx_status)
1338{
1339        switch (mgmt->u.action.category) {
1340        case WLAN_CATEGORY_SELF_PROTECTED:
1341                switch (mgmt->u.action.u.self_prot.action_code) {
1342                case WLAN_SP_MESH_PEERING_OPEN:
1343                case WLAN_SP_MESH_PEERING_CLOSE:
1344                case WLAN_SP_MESH_PEERING_CONFIRM:
1345                        mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
1346                        break;
1347                }
1348                break;
1349        case WLAN_CATEGORY_MESH_ACTION:
1350                if (mesh_action_is_path_sel(mgmt))
1351                        mesh_rx_path_sel_frame(sdata, mgmt, len);
1352                break;
1353        case WLAN_CATEGORY_SPECTRUM_MGMT:
1354                mesh_rx_csa_frame(sdata, mgmt, len);
1355                break;
1356        }
1357}
1358
1359void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
1360                                   struct sk_buff *skb)
1361{
1362        struct ieee80211_rx_status *rx_status;
1363        struct ieee80211_mgmt *mgmt;
1364        u16 stype;
1365
1366        sdata_lock(sdata);
1367
1368        /* mesh already went down */
1369        if (!sdata->u.mesh.mesh_id_len)
1370                goto out;
1371
1372        rx_status = IEEE80211_SKB_RXCB(skb);
1373        mgmt = (struct ieee80211_mgmt *) skb->data;
1374        stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
1375
1376        switch (stype) {
1377        case IEEE80211_STYPE_PROBE_RESP:
1378        case IEEE80211_STYPE_BEACON:
1379                ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
1380                                            rx_status);
1381                break;
1382        case IEEE80211_STYPE_PROBE_REQ:
1383                ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len);
1384                break;
1385        case IEEE80211_STYPE_ACTION:
1386                ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
1387                break;
1388        }
1389out:
1390        sdata_unlock(sdata);
1391}
1392
1393static void mesh_bss_info_changed(struct ieee80211_sub_if_data *sdata)
1394{
1395        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1396        u32 bit, changed = 0;
1397
1398        for_each_set_bit(bit, &ifmsh->mbss_changed,
1399                         sizeof(changed) * BITS_PER_BYTE) {
1400                clear_bit(bit, &ifmsh->mbss_changed);
1401                changed |= BIT(bit);
1402        }
1403
1404        if (sdata->vif.bss_conf.enable_beacon &&
1405            (changed & (BSS_CHANGED_BEACON |
1406                        BSS_CHANGED_HT |
1407                        BSS_CHANGED_BASIC_RATES |
1408                        BSS_CHANGED_BEACON_INT)))
1409                if (ieee80211_mesh_rebuild_beacon(sdata))
1410                        return;
1411
1412        ieee80211_bss_info_change_notify(sdata, changed);
1413}
1414
1415void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
1416{
1417        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1418
1419        sdata_lock(sdata);
1420
1421        /* mesh already went down */
1422        if (!sdata->u.mesh.mesh_id_len)
1423                goto out;
1424
1425        if (ifmsh->preq_queue_len &&
1426            time_after(jiffies,
1427                       ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
1428                mesh_path_start_discovery(sdata);
1429
1430        if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
1431                ieee80211_mesh_housekeeping(sdata);
1432
1433        if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
1434                ieee80211_mesh_rootpath(sdata);
1435
1436        if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags))
1437                mesh_sync_adjust_tsf(sdata);
1438
1439        if (test_and_clear_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags))
1440                mesh_bss_info_changed(sdata);
1441out:
1442        sdata_unlock(sdata);
1443}
1444
1445
1446void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
1447{
1448        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1449        static u8 zero_addr[ETH_ALEN] = {};
1450
1451        timer_setup(&ifmsh->housekeeping_timer,
1452                    ieee80211_mesh_housekeeping_timer, 0);
1453
1454        ifmsh->accepting_plinks = true;
1455        atomic_set(&ifmsh->mpaths, 0);
1456        mesh_rmc_init(sdata);
1457        ifmsh->last_preq = jiffies;
1458        ifmsh->next_perr = jiffies;
1459        ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
1460        /* Allocate all mesh structures when creating the first mesh interface. */
1461        if (!mesh_allocated)
1462                ieee80211s_init();
1463
1464        mesh_pathtbl_init(sdata);
1465
1466        timer_setup(&ifmsh->mesh_path_timer, ieee80211_mesh_path_timer, 0);
1467        timer_setup(&ifmsh->mesh_path_root_timer,
1468                    ieee80211_mesh_path_root_timer, 0);
1469        INIT_LIST_HEAD(&ifmsh->preq_queue.list);
1470        skb_queue_head_init(&ifmsh->ps.bc_buf);
1471        spin_lock_init(&ifmsh->mesh_preq_queue_lock);
1472        spin_lock_init(&ifmsh->sync_offset_lock);
1473        RCU_INIT_POINTER(ifmsh->beacon, NULL);
1474
1475        sdata->vif.bss_conf.bssid = zero_addr;
1476}
1477
1478void ieee80211_mesh_teardown_sdata(struct ieee80211_sub_if_data *sdata)
1479{
1480        mesh_rmc_free(sdata);
1481        mesh_pathtbl_unregister(sdata);
1482}
1483