/*
 * linux/arch/arm/mach-omap2/usb-tusb6010.c
 *
 * Copyright (C) 2006 Nokia Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/err.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/export.h>
#include <linux/platform_data/usb-omap.h>

#include <linux/usb/musb.h>

#include "gpmc.h"

static u8               async_cs, sync_cs;
static unsigned         refclk_psec;

static struct gpmc_settings tusb_async = {
        .wait_on_read   = true,
        .wait_on_write  = true,
        .device_width   = GPMC_DEVWIDTH_16BIT,
        .mux_add_data   = GPMC_MUX_AD,
};

static struct gpmc_settings tusb_sync = {
        .burst_read     = true,
        .burst_write    = true,
        .sync_read      = true,
        .sync_write     = true,
        .wait_on_read   = true,
        .wait_on_write  = true,
        .burst_len      = GPMC_BURST_16,
        .device_width   = GPMC_DEVWIDTH_16BIT,
        .mux_add_data   = GPMC_MUX_AD,
};

/* NOTE:  timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */

static int tusb_set_async_mode(unsigned sysclk_ps)
{
        struct gpmc_device_timings dev_t;
        struct gpmc_timings     t;
        unsigned                t_acsnh_advnh = sysclk_ps + 3000;

        memset(&dev_t, 0, sizeof(dev_t));

        dev_t.t_ceasu = 8 * 1000;
        dev_t.t_avdasu = t_acsnh_advnh - 7000;
        dev_t.t_ce_avd = 1000;
        dev_t.t_avdp_r = t_acsnh_advnh;
        dev_t.t_oeasu = t_acsnh_advnh + 1000;
        dev_t.t_oe = 300;
        dev_t.t_cez_r = 7000;
        dev_t.t_cez_w = dev_t.t_cez_r;
        dev_t.t_avdp_w = t_acsnh_advnh;
        dev_t.t_weasu = t_acsnh_advnh + 1000;
        dev_t.t_wpl = 300;
        dev_t.cyc_aavdh_we = 1;

        gpmc_calc_timings(&t, &tusb_async, &dev_t);

        return gpmc_cs_set_timings(async_cs, &t, &tusb_async);
}

static int tusb_set_sync_mode(unsigned sysclk_ps)
{
        struct gpmc_device_timings dev_t;
        struct gpmc_timings     t;
        unsigned                t_scsnh_advnh = sysclk_ps + 3000;

        memset(&dev_t, 0, sizeof(dev_t));

        dev_t.clk = 11100;
        dev_t.t_bacc = 1000;
        dev_t.t_ces = 1000;
        dev_t.t_ceasu = 8 * 1000;
        dev_t.t_avdasu = t_scsnh_advnh - 7000;
        dev_t.t_ce_avd = 1000;
        dev_t.t_avdp_r = t_scsnh_advnh;
        dev_t.cyc_aavdh_oe = 3;
        dev_t.cyc_oe = 5;
        dev_t.t_ce_rdyz = 7000;
        dev_t.t_avdp_w = t_scsnh_advnh;
        dev_t.cyc_aavdh_we = 3;
        dev_t.cyc_wpl = 6;

        gpmc_calc_timings(&t, &tusb_sync, &dev_t);

        return gpmc_cs_set_timings(sync_cs, &t, &tusb_sync);
}

/* tusb driver calls this when it changes the chip's clocking */
int tusb6010_platform_retime(unsigned is_refclk)
{
        static const char       error[] =
                KERN_ERR "tusb6010 %s retime error %d\n";

        unsigned        sysclk_ps;
        int             status;

        if (!refclk_psec)
                return -ENODEV;

        sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;

        status = tusb_set_async_mode(sysclk_ps);
        if (status < 0) {
                printk(error, "async", status);
                goto done;
        }
        status = tusb_set_sync_mode(sysclk_ps);
        if (status < 0)
                printk(error, "sync", status);
done:
        return status;
}
EXPORT_SYMBOL_GPL(tusb6010_platform_retime);

static struct resource tusb_resources[] = {
        /* Order is significant!  The start/end fields
         * are updated during setup..
         */
        { /* Asynchronous access */
                .flags  = IORESOURCE_MEM,
        },
        { /* Synchronous access */
                .flags  = IORESOURCE_MEM,
        },
        { /* IRQ */
                .name   = "mc",
                .flags  = IORESOURCE_IRQ,
        },
};

static u64 tusb_dmamask = ~(u32)0;

static struct platform_device tusb_device = {
        .name           = "musb-tusb",
        .id             = -1,
        .dev = {
                .dma_mask               = &tusb_dmamask,
                .coherent_dma_mask      = 0xffffffff,
        },
        .num_resources  = ARRAY_SIZE(tusb_resources),
        .resource       = tusb_resources,
};


/* this may be called only from board-*.c setup code */
int __init
tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
                unsigned ps_refclk, unsigned waitpin,
                unsigned async, unsigned sync,
                unsigned irq, unsigned dmachan)
{
        int             status;
        static char     error[] __initdata =
                KERN_ERR "tusb6010 init error %d, %d\n";

        /* ASYNC region, primarily for PIO */
        status = gpmc_cs_request(async, SZ_16M, (unsigned long *)
                                &tusb_resources[0].start);
        if (status < 0) {
                printk(error, 1, status);
                return status;
        }
        tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
        tusb_async.wait_pin = waitpin;
        async_cs = async;

        status = gpmc_cs_program_settings(async_cs, &tusb_async);
        if (status < 0)
                return status;

        /* SYNC region, primarily for DMA */
        status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
                                &tusb_resources[1].start);
        if (status < 0) {
                printk(error, 2, status);
                return status;
        }
        tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
        tusb_sync.wait_pin = waitpin;
        sync_cs = sync;

        status = gpmc_cs_program_settings(sync_cs, &tusb_sync);
        if (status < 0)
                return status;

        /* IRQ */
        status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
        if (status < 0) {
                printk(error, 3, status);
                return status;
        }
        tusb_resources[2].start = gpio_to_irq(irq);

        /* set up memory timings ... can speed them up later */
        if (!ps_refclk) {
                printk(error, 4, status);
                return -ENODEV;
        }
        refclk_psec = ps_refclk;
        status = tusb6010_platform_retime(1);
        if (status < 0) {
                printk(error, 5, status);
                return status;
        }

        /* finish device setup ... */
        if (!data) {
                printk(error, 6, status);
                return -ENODEV;
        }
        tusb_device.dev.platform_data = data;

        /* so far so good ... register the device */
        status = platform_device_register(&tusb_device);
        if (status < 0) {
                printk(error, 7, status);
                return status;
        }
        return 0;
}