linux/drivers/ata/ata_piix.c
<<
>>
Prefs
   1/*
   2 *    ata_piix.c - Intel PATA/SATA controllers
   3 *
   4 *    Maintained by:  Tejun Heo <tj@kernel.org>
   5 *                  Please ALWAYS copy linux-ide@vger.kernel.org
   6 *                  on emails.
   7 *
   8 *
   9 *      Copyright 2003-2005 Red Hat Inc
  10 *      Copyright 2003-2005 Jeff Garzik
  11 *
  12 *
  13 *      Copyright header from piix.c:
  14 *
  15 *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  16 *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
  17 *  Copyright (C) 2003 Red Hat Inc
  18 *
  19 *
  20 *  This program is free software; you can redistribute it and/or modify
  21 *  it under the terms of the GNU General Public License as published by
  22 *  the Free Software Foundation; either version 2, or (at your option)
  23 *  any later version.
  24 *
  25 *  This program is distributed in the hope that it will be useful,
  26 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  27 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  28 *  GNU General Public License for more details.
  29 *
  30 *  You should have received a copy of the GNU General Public License
  31 *  along with this program; see the file COPYING.  If not, write to
  32 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  33 *
  34 *
  35 *  libata documentation is available via 'make {ps|pdf}docs',
  36 *  as Documentation/driver-api/libata.rst
  37 *
  38 *  Hardware documentation available at http://developer.intel.com/
  39 *
  40 * Documentation
  41 *      Publicly available from Intel web site. Errata documentation
  42 * is also publicly available. As an aide to anyone hacking on this
  43 * driver the list of errata that are relevant is below, going back to
  44 * PIIX4. Older device documentation is now a bit tricky to find.
  45 *
  46 * The chipsets all follow very much the same design. The original Triton
  47 * series chipsets do _not_ support independent device timings, but this
  48 * is fixed in Triton II. With the odd mobile exception the chips then
  49 * change little except in gaining more modes until SATA arrives. This
  50 * driver supports only the chips with independent timing (that is those
  51 * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix
  52 * for the early chip drivers.
  53 *
  54 * Errata of note:
  55 *
  56 * Unfixable
  57 *      PIIX4    errata #9      - Only on ultra obscure hw
  58 *      ICH3     errata #13     - Not observed to affect real hw
  59 *                                by Intel
  60 *
  61 * Things we must deal with
  62 *      PIIX4   errata #10      - BM IDE hang with non UDMA
  63 *                                (must stop/start dma to recover)
  64 *      440MX   errata #15      - As PIIX4 errata #10
  65 *      PIIX4   errata #15      - Must not read control registers
  66 *                                during a PIO transfer
  67 *      440MX   errata #13      - As PIIX4 errata #15
  68 *      ICH2    errata #21      - DMA mode 0 doesn't work right
  69 *      ICH0/1  errata #55      - As ICH2 errata #21
  70 *      ICH2    spec c #9       - Extra operations needed to handle
  71 *                                drive hotswap [NOT YET SUPPORTED]
  72 *      ICH2    spec c #20      - IDE PRD must not cross a 64K boundary
  73 *                                and must be dword aligned
  74 *      ICH2    spec c #24      - UDMA mode 4,5 t85/86 should be 6ns not 3.3
  75 *      ICH7    errata #16      - MWDMA1 timings are incorrect
  76 *
  77 * Should have been BIOS fixed:
  78 *      450NX:  errata #19      - DMA hangs on old 450NX
  79 *      450NX:  errata #20      - DMA hangs on old 450NX
  80 *      450NX:  errata #25      - Corruption with DMA on old 450NX
  81 *      ICH3    errata #15      - IDE deadlock under high load
  82 *                                (BIOS must set dev 31 fn 0 bit 23)
  83 *      ICH3    errata #18      - Don't use native mode
  84 */
  85
  86#include <linux/kernel.h>
  87#include <linux/module.h>
  88#include <linux/pci.h>
  89#include <linux/init.h>
  90#include <linux/blkdev.h>
  91#include <linux/delay.h>
  92#include <linux/device.h>
  93#include <linux/gfp.h>
  94#include <scsi/scsi_host.h>
  95#include <linux/libata.h>
  96#include <linux/dmi.h>
  97
  98#define DRV_NAME        "ata_piix"
  99#define DRV_VERSION     "2.13"
 100
 101enum {
 102        PIIX_IOCFG              = 0x54, /* IDE I/O configuration register */
 103        ICH5_PMR                = 0x90, /* address map register */
 104        ICH5_PCS                = 0x92, /* port control and status */
 105        PIIX_SIDPR_BAR          = 5,
 106        PIIX_SIDPR_LEN          = 16,
 107        PIIX_SIDPR_IDX          = 0,
 108        PIIX_SIDPR_DATA         = 4,
 109
 110        PIIX_FLAG_CHECKINTR     = (1 << 28), /* make sure PCI INTx enabled */
 111        PIIX_FLAG_SIDPR         = (1 << 29), /* SATA idx/data pair regs */
 112
 113        PIIX_PATA_FLAGS         = ATA_FLAG_SLAVE_POSS,
 114        PIIX_SATA_FLAGS         = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
 115
 116        PIIX_FLAG_PIO16         = (1 << 30), /*support 16bit PIO only*/
 117
 118        PIIX_80C_PRI            = (1 << 5) | (1 << 4),
 119        PIIX_80C_SEC            = (1 << 7) | (1 << 6),
 120
 121        /* constants for mapping table */
 122        P0                      = 0,  /* port 0 */
 123        P1                      = 1,  /* port 1 */
 124        P2                      = 2,  /* port 2 */
 125        P3                      = 3,  /* port 3 */
 126        IDE                     = -1, /* IDE */
 127        NA                      = -2, /* not available */
 128        RV                      = -3, /* reserved */
 129
 130        PIIX_AHCI_DEVICE        = 6,
 131
 132        /* host->flags bits */
 133        PIIX_HOST_BROKEN_SUSPEND = (1 << 24),
 134};
 135
 136enum piix_controller_ids {
 137        /* controller IDs */
 138        piix_pata_mwdma,        /* PIIX3 MWDMA only */
 139        piix_pata_33,           /* PIIX4 at 33Mhz */
 140        ich_pata_33,            /* ICH up to UDMA 33 only */
 141        ich_pata_66,            /* ICH up to 66 Mhz */
 142        ich_pata_100,           /* ICH up to UDMA 100 */
 143        ich_pata_100_nomwdma1,  /* ICH up to UDMA 100 but with no MWDMA1*/
 144        ich5_sata,
 145        ich6_sata,
 146        ich6m_sata,
 147        ich8_sata,
 148        ich8_2port_sata,
 149        ich8m_apple_sata,       /* locks up on second port enable */
 150        tolapai_sata,
 151        piix_pata_vmw,                  /* PIIX4 for VMware, spurious DMA_ERR */
 152        ich8_sata_snb,
 153        ich8_2port_sata_snb,
 154        ich8_2port_sata_byt,
 155};
 156
 157struct piix_map_db {
 158        const u32 mask;
 159        const u16 port_enable;
 160        const int map[][4];
 161};
 162
 163struct piix_host_priv {
 164        const int *map;
 165        u32 saved_iocfg;
 166        void __iomem *sidpr;
 167};
 168
 169static unsigned int in_module_init = 1;
 170
 171static const struct pci_device_id piix_pci_tbl[] = {
 172        /* Intel PIIX3 for the 430HX etc */
 173        { 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_mwdma },
 174        /* VMware ICH4 */
 175        { 0x8086, 0x7111, 0x15ad, 0x1976, 0, 0, piix_pata_vmw },
 176        /* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
 177        /* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
 178        { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
 179        /* Intel PIIX4 */
 180        { 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
 181        /* Intel PIIX4 */
 182        { 0x8086, 0x7601, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
 183        /* Intel PIIX */
 184        { 0x8086, 0x84CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
 185        /* Intel ICH (i810, i815, i840) UDMA 66*/
 186        { 0x8086, 0x2411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_66 },
 187        /* Intel ICH0 : UDMA 33*/
 188        { 0x8086, 0x2421, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_33 },
 189        /* Intel ICH2M */
 190        { 0x8086, 0x244A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 191        /* Intel ICH2 (i810E2, i845, 850, 860) UDMA 100 */
 192        { 0x8086, 0x244B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 193        /*  Intel ICH3M */
 194        { 0x8086, 0x248A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 195        /* Intel ICH3 (E7500/1) UDMA 100 */
 196        { 0x8086, 0x248B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 197        /* Intel ICH4-L */
 198        { 0x8086, 0x24C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 199        /* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */
 200        { 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 201        { 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 202        /* Intel ICH5 */
 203        { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 204        /* C-ICH (i810E2) */
 205        { 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 206        /* ESB (855GME/875P + 6300ESB) UDMA 100  */
 207        { 0x8086, 0x25A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 208        /* ICH6 (and 6) (i915) UDMA 100 */
 209        { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 210        /* ICH7/7-R (i945, i975) UDMA 100*/
 211        { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
 212        { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
 213        /* ICH8 Mobile PATA Controller */
 214        { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 215
 216        /* SATA ports */
 217
 218        /* 82801EB (ICH5) */
 219        { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
 220        /* 82801EB (ICH5) */
 221        { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
 222        /* 6300ESB (ICH5 variant with broken PCS present bits) */
 223        { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
 224        /* 6300ESB pretending RAID */
 225        { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
 226        /* 82801FB/FW (ICH6/ICH6W) */
 227        { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
 228        /* 82801FR/FRW (ICH6R/ICH6RW) */
 229        { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
 230        /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented).
 231         * Attach iff the controller is in IDE mode. */
 232        { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID,
 233          PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata },
 234        /* 82801GB/GR/GH (ICH7, identical to ICH6) */
 235        { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
 236        /* 82801GBM/GHM (ICH7M, identical to ICH6M)  */
 237        { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata },
 238        /* Enterprise Southbridge 2 (631xESB/632xESB) */
 239        { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
 240        /* SATA Controller 1 IDE (ICH8) */
 241        { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 242        /* SATA Controller 2 IDE (ICH8) */
 243        { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 244        /* Mobile SATA Controller IDE (ICH8M), Apple */
 245        { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
 246        { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
 247        { 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata },
 248        /* Mobile SATA Controller IDE (ICH8M) */
 249        { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 250        /* SATA Controller IDE (ICH9) */
 251        { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 252        /* SATA Controller IDE (ICH9) */
 253        { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 254        /* SATA Controller IDE (ICH9) */
 255        { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 256        /* SATA Controller IDE (ICH9M) */
 257        { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 258        /* SATA Controller IDE (ICH9M) */
 259        { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 260        /* SATA Controller IDE (ICH9M) */
 261        { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 262        /* SATA Controller IDE (Tolapai) */
 263        { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata },
 264        /* SATA Controller IDE (ICH10) */
 265        { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 266        /* SATA Controller IDE (ICH10) */
 267        { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 268        /* SATA Controller IDE (ICH10) */
 269        { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 270        /* SATA Controller IDE (ICH10) */
 271        { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 272        /* SATA Controller IDE (PCH) */
 273        { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 274        /* SATA Controller IDE (PCH) */
 275        { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 276        /* SATA Controller IDE (PCH) */
 277        { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 278        /* SATA Controller IDE (PCH) */
 279        { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 280        /* SATA Controller IDE (PCH) */
 281        { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 282        /* SATA Controller IDE (PCH) */
 283        { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 284        /* SATA Controller IDE (CPT) */
 285        { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 286        /* SATA Controller IDE (CPT) */
 287        { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 288        /* SATA Controller IDE (CPT) */
 289        { 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 290        /* SATA Controller IDE (CPT) */
 291        { 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 292        /* SATA Controller IDE (PBG) */
 293        { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 294        /* SATA Controller IDE (PBG) */
 295        { 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 296        /* SATA Controller IDE (Panther Point) */
 297        { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 298        /* SATA Controller IDE (Panther Point) */
 299        { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 300        /* SATA Controller IDE (Panther Point) */
 301        { 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 302        /* SATA Controller IDE (Panther Point) */
 303        { 0x8086, 0x1e09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 304        /* SATA Controller IDE (Lynx Point) */
 305        { 0x8086, 0x8c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 306        /* SATA Controller IDE (Lynx Point) */
 307        { 0x8086, 0x8c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 308        /* SATA Controller IDE (Lynx Point) */
 309        { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
 310        /* SATA Controller IDE (Lynx Point) */
 311        { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 312        /* SATA Controller IDE (Lynx Point-LP) */
 313        { 0x8086, 0x9c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 314        /* SATA Controller IDE (Lynx Point-LP) */
 315        { 0x8086, 0x9c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 316        /* SATA Controller IDE (Lynx Point-LP) */
 317        { 0x8086, 0x9c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 318        /* SATA Controller IDE (Lynx Point-LP) */
 319        { 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 320        /* SATA Controller IDE (DH89xxCC) */
 321        { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 322        /* SATA Controller IDE (Avoton) */
 323        { 0x8086, 0x1f20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 324        /* SATA Controller IDE (Avoton) */
 325        { 0x8086, 0x1f21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 326        /* SATA Controller IDE (Avoton) */
 327        { 0x8086, 0x1f30, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 328        /* SATA Controller IDE (Avoton) */
 329        { 0x8086, 0x1f31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 330        /* SATA Controller IDE (Wellsburg) */
 331        { 0x8086, 0x8d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 332        /* SATA Controller IDE (Wellsburg) */
 333        { 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
 334        /* SATA Controller IDE (Wellsburg) */
 335        { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 336        /* SATA Controller IDE (Wellsburg) */
 337        { 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 338        /* SATA Controller IDE (BayTrail) */
 339        { 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
 340        { 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
 341        /* SATA Controller IDE (Coleto Creek) */
 342        { 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 343        /* SATA Controller IDE (9 Series) */
 344        { 0x8086, 0x8c88, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
 345        /* SATA Controller IDE (9 Series) */
 346        { 0x8086, 0x8c89, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
 347        /* SATA Controller IDE (9 Series) */
 348        { 0x8086, 0x8c80, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 349        /* SATA Controller IDE (9 Series) */
 350        { 0x8086, 0x8c81, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 351
 352        { }     /* terminate list */
 353};
 354
 355static const struct piix_map_db ich5_map_db = {
 356        .mask = 0x7,
 357        .port_enable = 0x3,
 358        .map = {
 359                /* PM   PS   SM   SS       MAP  */
 360                {  P0,  NA,  P1,  NA }, /* 000b */
 361                {  P1,  NA,  P0,  NA }, /* 001b */
 362                {  RV,  RV,  RV,  RV },
 363                {  RV,  RV,  RV,  RV },
 364                {  P0,  P1, IDE, IDE }, /* 100b */
 365                {  P1,  P0, IDE, IDE }, /* 101b */
 366                { IDE, IDE,  P0,  P1 }, /* 110b */
 367                { IDE, IDE,  P1,  P0 }, /* 111b */
 368        },
 369};
 370
 371static const struct piix_map_db ich6_map_db = {
 372        .mask = 0x3,
 373        .port_enable = 0xf,
 374        .map = {
 375                /* PM   PS   SM   SS       MAP */
 376                {  P0,  P2,  P1,  P3 }, /* 00b */
 377                { IDE, IDE,  P1,  P3 }, /* 01b */
 378                {  P0,  P2, IDE, IDE }, /* 10b */
 379                {  RV,  RV,  RV,  RV },
 380        },
 381};
 382
 383static const struct piix_map_db ich6m_map_db = {
 384        .mask = 0x3,
 385        .port_enable = 0x5,
 386
 387        /* Map 01b isn't specified in the doc but some notebooks use
 388         * it anyway.  MAP 01b have been spotted on both ICH6M and
 389         * ICH7M.
 390         */
 391        .map = {
 392                /* PM   PS   SM   SS       MAP */
 393                {  P0,  P2,  NA,  NA }, /* 00b */
 394                { IDE, IDE,  P1,  P3 }, /* 01b */
 395                {  P0,  P2, IDE, IDE }, /* 10b */
 396                {  RV,  RV,  RV,  RV },
 397        },
 398};
 399
 400static const struct piix_map_db ich8_map_db = {
 401        .mask = 0x3,
 402        .port_enable = 0xf,
 403        .map = {
 404                /* PM   PS   SM   SS       MAP */
 405                {  P0,  P2,  P1,  P3 }, /* 00b (hardwired when in AHCI) */
 406                {  RV,  RV,  RV,  RV },
 407                {  P0,  P2, IDE, IDE }, /* 10b (IDE mode) */
 408                {  RV,  RV,  RV,  RV },
 409        },
 410};
 411
 412static const struct piix_map_db ich8_2port_map_db = {
 413        .mask = 0x3,
 414        .port_enable = 0x3,
 415        .map = {
 416                /* PM   PS   SM   SS       MAP */
 417                {  P0,  NA,  P1,  NA }, /* 00b */
 418                {  RV,  RV,  RV,  RV }, /* 01b */
 419                {  RV,  RV,  RV,  RV }, /* 10b */
 420                {  RV,  RV,  RV,  RV },
 421        },
 422};
 423
 424static const struct piix_map_db ich8m_apple_map_db = {
 425        .mask = 0x3,
 426        .port_enable = 0x1,
 427        .map = {
 428                /* PM   PS   SM   SS       MAP */
 429                {  P0,  NA,  NA,  NA }, /* 00b */
 430                {  RV,  RV,  RV,  RV },
 431                {  P0,  P2, IDE, IDE }, /* 10b */
 432                {  RV,  RV,  RV,  RV },
 433        },
 434};
 435
 436static const struct piix_map_db tolapai_map_db = {
 437        .mask = 0x3,
 438        .port_enable = 0x3,
 439        .map = {
 440                /* PM   PS   SM   SS       MAP */
 441                {  P0,  NA,  P1,  NA }, /* 00b */
 442                {  RV,  RV,  RV,  RV }, /* 01b */
 443                {  RV,  RV,  RV,  RV }, /* 10b */
 444                {  RV,  RV,  RV,  RV },
 445        },
 446};
 447
 448static const struct piix_map_db *piix_map_db_table[] = {
 449        [ich5_sata]             = &ich5_map_db,
 450        [ich6_sata]             = &ich6_map_db,
 451        [ich6m_sata]            = &ich6m_map_db,
 452        [ich8_sata]             = &ich8_map_db,
 453        [ich8_2port_sata]       = &ich8_2port_map_db,
 454        [ich8m_apple_sata]      = &ich8m_apple_map_db,
 455        [tolapai_sata]          = &tolapai_map_db,
 456        [ich8_sata_snb]         = &ich8_map_db,
 457        [ich8_2port_sata_snb]   = &ich8_2port_map_db,
 458        [ich8_2port_sata_byt]   = &ich8_2port_map_db,
 459};
 460
 461static const struct pci_bits piix_enable_bits[] = {
 462        { 0x41U, 1U, 0x80UL, 0x80UL },  /* port 0 */
 463        { 0x43U, 1U, 0x80UL, 0x80UL },  /* port 1 */
 464};
 465
 466MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik");
 467MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers");
 468MODULE_LICENSE("GPL");
 469MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
 470MODULE_VERSION(DRV_VERSION);
 471
 472struct ich_laptop {
 473        u16 device;
 474        u16 subvendor;
 475        u16 subdevice;
 476};
 477
 478/*
 479 *      List of laptops that use short cables rather than 80 wire
 480 */
 481
 482static const struct ich_laptop ich_laptop[] = {
 483        /* devid, subvendor, subdev */
 484        { 0x27DF, 0x0005, 0x0280 },     /* ICH7 on Acer 5602WLMi */
 485        { 0x27DF, 0x1025, 0x0102 },     /* ICH7 on Acer 5602aWLMi */
 486        { 0x27DF, 0x1025, 0x0110 },     /* ICH7 on Acer 3682WLMi */
 487        { 0x27DF, 0x1028, 0x02b0 },     /* ICH7 on unknown Dell */
 488        { 0x27DF, 0x1043, 0x1267 },     /* ICH7 on Asus W5F */
 489        { 0x27DF, 0x103C, 0x30A1 },     /* ICH7 on HP Compaq nc2400 */
 490        { 0x27DF, 0x103C, 0x361a },     /* ICH7 on unknown HP  */
 491        { 0x27DF, 0x1071, 0xD221 },     /* ICH7 on Hercules EC-900 */
 492        { 0x27DF, 0x152D, 0x0778 },     /* ICH7 on unknown Intel */
 493        { 0x24CA, 0x1025, 0x0061 },     /* ICH4 on ACER Aspire 2023WLMi */
 494        { 0x24CA, 0x1025, 0x003d },     /* ICH4 on ACER TM290 */
 495        { 0x24CA, 0x10CF, 0x11AB },     /* ICH4M on Fujitsu-Siemens Lifebook S6120 */
 496        { 0x266F, 0x1025, 0x0066 },     /* ICH6 on ACER Aspire 1694WLMi */
 497        { 0x2653, 0x1043, 0x82D8 },     /* ICH6M on Asus Eee 701 */
 498        { 0x27df, 0x104d, 0x900e },     /* ICH7 on Sony TZ-90 */
 499        /* end marker */
 500        { 0, }
 501};
 502
 503static int piix_port_start(struct ata_port *ap)
 504{
 505        if (!(ap->flags & PIIX_FLAG_PIO16))
 506                ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
 507
 508        return ata_bmdma_port_start(ap);
 509}
 510
 511/**
 512 *      ich_pata_cable_detect - Probe host controller cable detect info
 513 *      @ap: Port for which cable detect info is desired
 514 *
 515 *      Read 80c cable indicator from ATA PCI device's PCI config
 516 *      register.  This register is normally set by firmware (BIOS).
 517 *
 518 *      LOCKING:
 519 *      None (inherited from caller).
 520 */
 521
 522static int ich_pata_cable_detect(struct ata_port *ap)
 523{
 524        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 525        struct piix_host_priv *hpriv = ap->host->private_data;
 526        const struct ich_laptop *lap = &ich_laptop[0];
 527        u8 mask;
 528
 529        /* Check for specials */
 530        while (lap->device) {
 531                if (lap->device == pdev->device &&
 532                    lap->subvendor == pdev->subsystem_vendor &&
 533                    lap->subdevice == pdev->subsystem_device)
 534                        return ATA_CBL_PATA40_SHORT;
 535
 536                lap++;
 537        }
 538
 539        /* check BIOS cable detect results */
 540        mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
 541        if ((hpriv->saved_iocfg & mask) == 0)
 542                return ATA_CBL_PATA40;
 543        return ATA_CBL_PATA80;
 544}
 545
 546/**
 547 *      piix_pata_prereset - prereset for PATA host controller
 548 *      @link: Target link
 549 *      @deadline: deadline jiffies for the operation
 550 *
 551 *      LOCKING:
 552 *      None (inherited from caller).
 553 */
 554static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
 555{
 556        struct ata_port *ap = link->ap;
 557        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 558
 559        if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
 560                return -ENOENT;
 561        return ata_sff_prereset(link, deadline);
 562}
 563
 564static DEFINE_SPINLOCK(piix_lock);
 565
 566static void piix_set_timings(struct ata_port *ap, struct ata_device *adev,
 567                             u8 pio)
 568{
 569        struct pci_dev *dev     = to_pci_dev(ap->host->dev);
 570        unsigned long flags;
 571        unsigned int is_slave   = (adev->devno != 0);
 572        unsigned int master_port= ap->port_no ? 0x42 : 0x40;
 573        unsigned int slave_port = 0x44;
 574        u16 master_data;
 575        u8 slave_data;
 576        u8 udma_enable;
 577        int control = 0;
 578
 579        /*
 580         *      See Intel Document 298600-004 for the timing programing rules
 581         *      for ICH controllers.
 582         */
 583
 584        static const     /* ISP  RTC */
 585        u8 timings[][2] = { { 0, 0 },
 586                            { 0, 0 },
 587                            { 1, 0 },
 588                            { 2, 1 },
 589                            { 2, 3 }, };
 590
 591        if (pio >= 2)
 592                control |= 1;   /* TIME1 enable */
 593        if (ata_pio_need_iordy(adev))
 594                control |= 2;   /* IE enable */
 595        /* Intel specifies that the PPE functionality is for disk only */
 596        if (adev->class == ATA_DEV_ATA)
 597                control |= 4;   /* PPE enable */
 598        /*
 599         * If the drive MWDMA is faster than it can do PIO then
 600         * we must force PIO into PIO0
 601         */
 602        if (adev->pio_mode < XFER_PIO_0 + pio)
 603                /* Enable DMA timing only */
 604                control |= 8;   /* PIO cycles in PIO0 */
 605
 606        spin_lock_irqsave(&piix_lock, flags);
 607
 608        /* PIO configuration clears DTE unconditionally.  It will be
 609         * programmed in set_dmamode which is guaranteed to be called
 610         * after set_piomode if any DMA mode is available.
 611         */
 612        pci_read_config_word(dev, master_port, &master_data);
 613        if (is_slave) {
 614                /* clear TIME1|IE1|PPE1|DTE1 */
 615                master_data &= 0xff0f;
 616                /* enable PPE1, IE1 and TIME1 as needed */
 617                master_data |= (control << 4);
 618                pci_read_config_byte(dev, slave_port, &slave_data);
 619                slave_data &= (ap->port_no ? 0x0f : 0xf0);
 620                /* Load the timing nibble for this slave */
 621                slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
 622                                                << (ap->port_no ? 4 : 0);
 623        } else {
 624                /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
 625                master_data &= 0xccf0;
 626                /* Enable PPE, IE and TIME as appropriate */
 627                master_data |= control;
 628                /* load ISP and RCT */
 629                master_data |=
 630                        (timings[pio][0] << 12) |
 631                        (timings[pio][1] << 8);
 632        }
 633
 634        /* Enable SITRE (separate slave timing register) */
 635        master_data |= 0x4000;
 636        pci_write_config_word(dev, master_port, master_data);
 637        if (is_slave)
 638                pci_write_config_byte(dev, slave_port, slave_data);
 639
 640        /* Ensure the UDMA bit is off - it will be turned back on if
 641           UDMA is selected */
 642
 643        if (ap->udma_mask) {
 644                pci_read_config_byte(dev, 0x48, &udma_enable);
 645                udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
 646                pci_write_config_byte(dev, 0x48, udma_enable);
 647        }
 648
 649        spin_unlock_irqrestore(&piix_lock, flags);
 650}
 651
 652/**
 653 *      piix_set_piomode - Initialize host controller PATA PIO timings
 654 *      @ap: Port whose timings we are configuring
 655 *      @adev: Drive in question
 656 *
 657 *      Set PIO mode for device, in host controller PCI config space.
 658 *
 659 *      LOCKING:
 660 *      None (inherited from caller).
 661 */
 662
 663static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 664{
 665        piix_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0);
 666}
 667
 668/**
 669 *      do_pata_set_dmamode - Initialize host controller PATA PIO timings
 670 *      @ap: Port whose timings we are configuring
 671 *      @adev: Drive in question
 672 *      @isich: set if the chip is an ICH device
 673 *
 674 *      Set UDMA mode for device, in host controller PCI config space.
 675 *
 676 *      LOCKING:
 677 *      None (inherited from caller).
 678 */
 679
 680static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich)
 681{
 682        struct pci_dev *dev     = to_pci_dev(ap->host->dev);
 683        unsigned long flags;
 684        u8 speed                = adev->dma_mode;
 685        int devid               = adev->devno + 2 * ap->port_no;
 686        u8 udma_enable          = 0;
 687
 688        if (speed >= XFER_UDMA_0) {
 689                unsigned int udma = speed - XFER_UDMA_0;
 690                u16 udma_timing;
 691                u16 ideconf;
 692                int u_clock, u_speed;
 693
 694                spin_lock_irqsave(&piix_lock, flags);
 695
 696                pci_read_config_byte(dev, 0x48, &udma_enable);
 697
 698                /*
 699                 * UDMA is handled by a combination of clock switching and
 700                 * selection of dividers
 701                 *
 702                 * Handy rule: Odd modes are UDMATIMx 01, even are 02
 703                 *             except UDMA0 which is 00
 704                 */
 705                u_speed = min(2 - (udma & 1), udma);
 706                if (udma == 5)
 707                        u_clock = 0x1000;       /* 100Mhz */
 708                else if (udma > 2)
 709                        u_clock = 1;            /* 66Mhz */
 710                else
 711                        u_clock = 0;            /* 33Mhz */
 712
 713                udma_enable |= (1 << devid);
 714
 715                /* Load the CT/RP selection */
 716                pci_read_config_word(dev, 0x4A, &udma_timing);
 717                udma_timing &= ~(3 << (4 * devid));
 718                udma_timing |= u_speed << (4 * devid);
 719                pci_write_config_word(dev, 0x4A, udma_timing);
 720
 721                if (isich) {
 722                        /* Select a 33/66/100Mhz clock */
 723                        pci_read_config_word(dev, 0x54, &ideconf);
 724                        ideconf &= ~(0x1001 << devid);
 725                        ideconf |= u_clock << devid;
 726                        /* For ICH or later we should set bit 10 for better
 727                           performance (WR_PingPong_En) */
 728                        pci_write_config_word(dev, 0x54, ideconf);
 729                }
 730
 731                pci_write_config_byte(dev, 0x48, udma_enable);
 732
 733                spin_unlock_irqrestore(&piix_lock, flags);
 734        } else {
 735                /* MWDMA is driven by the PIO timings. */
 736                unsigned int mwdma = speed - XFER_MW_DMA_0;
 737                const unsigned int needed_pio[3] = {
 738                        XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
 739                };
 740                int pio = needed_pio[mwdma] - XFER_PIO_0;
 741
 742                /* XFER_PIO_0 is never used currently */
 743                piix_set_timings(ap, adev, pio);
 744        }
 745}
 746
 747/**
 748 *      piix_set_dmamode - Initialize host controller PATA DMA timings
 749 *      @ap: Port whose timings we are configuring
 750 *      @adev: um
 751 *
 752 *      Set MW/UDMA mode for device, in host controller PCI config space.
 753 *
 754 *      LOCKING:
 755 *      None (inherited from caller).
 756 */
 757
 758static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 759{
 760        do_pata_set_dmamode(ap, adev, 0);
 761}
 762
 763/**
 764 *      ich_set_dmamode - Initialize host controller PATA DMA timings
 765 *      @ap: Port whose timings we are configuring
 766 *      @adev: um
 767 *
 768 *      Set MW/UDMA mode for device, in host controller PCI config space.
 769 *
 770 *      LOCKING:
 771 *      None (inherited from caller).
 772 */
 773
 774static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 775{
 776        do_pata_set_dmamode(ap, adev, 1);
 777}
 778
 779/*
 780 * Serial ATA Index/Data Pair Superset Registers access
 781 *
 782 * Beginning from ICH8, there's a sane way to access SCRs using index
 783 * and data register pair located at BAR5 which means that we have
 784 * separate SCRs for master and slave.  This is handled using libata
 785 * slave_link facility.
 786 */
 787static const int piix_sidx_map[] = {
 788        [SCR_STATUS]    = 0,
 789        [SCR_ERROR]     = 2,
 790        [SCR_CONTROL]   = 1,
 791};
 792
 793static void piix_sidpr_sel(struct ata_link *link, unsigned int reg)
 794{
 795        struct ata_port *ap = link->ap;
 796        struct piix_host_priv *hpriv = ap->host->private_data;
 797
 798        iowrite32(((ap->port_no * 2 + link->pmp) << 8) | piix_sidx_map[reg],
 799                  hpriv->sidpr + PIIX_SIDPR_IDX);
 800}
 801
 802static int piix_sidpr_scr_read(struct ata_link *link,
 803                               unsigned int reg, u32 *val)
 804{
 805        struct piix_host_priv *hpriv = link->ap->host->private_data;
 806
 807        if (reg >= ARRAY_SIZE(piix_sidx_map))
 808                return -EINVAL;
 809
 810        piix_sidpr_sel(link, reg);
 811        *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
 812        return 0;
 813}
 814
 815static int piix_sidpr_scr_write(struct ata_link *link,
 816                                unsigned int reg, u32 val)
 817{
 818        struct piix_host_priv *hpriv = link->ap->host->private_data;
 819
 820        if (reg >= ARRAY_SIZE(piix_sidx_map))
 821                return -EINVAL;
 822
 823        piix_sidpr_sel(link, reg);
 824        iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
 825        return 0;
 826}
 827
 828static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 829                              unsigned hints)
 830{
 831        return sata_link_scr_lpm(link, policy, false);
 832}
 833
 834static bool piix_irq_check(struct ata_port *ap)
 835{
 836        if (unlikely(!ap->ioaddr.bmdma_addr))
 837                return false;
 838
 839        return ap->ops->bmdma_status(ap) & ATA_DMA_INTR;
 840}
 841
 842#ifdef CONFIG_PM_SLEEP
 843static int piix_broken_suspend(void)
 844{
 845        static const struct dmi_system_id sysids[] = {
 846                {
 847                        .ident = "TECRA M3",
 848                        .matches = {
 849                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 850                                DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"),
 851                        },
 852                },
 853                {
 854                        .ident = "TECRA M3",
 855                        .matches = {
 856                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 857                                DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M3"),
 858                        },
 859                },
 860                {
 861                        .ident = "TECRA M4",
 862                        .matches = {
 863                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 864                                DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"),
 865                        },
 866                },
 867                {
 868                        .ident = "TECRA M4",
 869                        .matches = {
 870                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 871                                DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"),
 872                        },
 873                },
 874                {
 875                        .ident = "TECRA M5",
 876                        .matches = {
 877                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 878                                DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"),
 879                        },
 880                },
 881                {
 882                        .ident = "TECRA M6",
 883                        .matches = {
 884                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 885                                DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M6"),
 886                        },
 887                },
 888                {
 889                        .ident = "TECRA M7",
 890                        .matches = {
 891                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 892                                DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M7"),
 893                        },
 894                },
 895                {
 896                        .ident = "TECRA A8",
 897                        .matches = {
 898                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 899                                DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A8"),
 900                        },
 901                },
 902                {
 903                        .ident = "Satellite R20",
 904                        .matches = {
 905                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 906                                DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R20"),
 907                        },
 908                },
 909                {
 910                        .ident = "Satellite R25",
 911                        .matches = {
 912                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 913                                DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R25"),
 914                        },
 915                },
 916                {
 917                        .ident = "Satellite U200",
 918                        .matches = {
 919                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 920                                DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"),
 921                        },
 922                },
 923                {
 924                        .ident = "Satellite U200",
 925                        .matches = {
 926                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 927                                DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U200"),
 928                        },
 929                },
 930                {
 931                        .ident = "Satellite Pro U200",
 932                        .matches = {
 933                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 934                                DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE PRO U200"),
 935                        },
 936                },
 937                {
 938                        .ident = "Satellite U205",
 939                        .matches = {
 940                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 941                                DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"),
 942                        },
 943                },
 944                {
 945                        .ident = "SATELLITE U205",
 946                        .matches = {
 947                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 948                                DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U205"),
 949                        },
 950                },
 951                {
 952                        .ident = "Satellite Pro A120",
 953                        .matches = {
 954                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 955                                DMI_MATCH(DMI_PRODUCT_NAME, "Satellite Pro A120"),
 956                        },
 957                },
 958                {
 959                        .ident = "Portege M500",
 960                        .matches = {
 961                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 962                                DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
 963                        },
 964                },
 965                {
 966                        .ident = "VGN-BX297XP",
 967                        .matches = {
 968                                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 969                                DMI_MATCH(DMI_PRODUCT_NAME, "VGN-BX297XP"),
 970                        },
 971                },
 972
 973                { }     /* terminate list */
 974        };
 975        static const char *oemstrs[] = {
 976                "Tecra M3,",
 977        };
 978        int i;
 979
 980        if (dmi_check_system(sysids))
 981                return 1;
 982
 983        for (i = 0; i < ARRAY_SIZE(oemstrs); i++)
 984                if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
 985                        return 1;
 986
 987        /* TECRA M4 sometimes forgets its identify and reports bogus
 988         * DMI information.  As the bogus information is a bit
 989         * generic, match as many entries as possible.  This manual
 990         * matching is necessary because dmi_system_id.matches is
 991         * limited to four entries.
 992         */
 993        if (dmi_match(DMI_SYS_VENDOR, "TOSHIBA") &&
 994            dmi_match(DMI_PRODUCT_NAME, "000000") &&
 995            dmi_match(DMI_PRODUCT_VERSION, "000000") &&
 996            dmi_match(DMI_PRODUCT_SERIAL, "000000") &&
 997            dmi_match(DMI_BOARD_VENDOR, "TOSHIBA") &&
 998            dmi_match(DMI_BOARD_NAME, "Portable PC") &&
 999            dmi_match(DMI_BOARD_VERSION, "Version A0"))
1000                return 1;
1001
1002        return 0;
1003}
1004
1005static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
1006{
1007        struct ata_host *host = pci_get_drvdata(pdev);
1008        unsigned long flags;
1009        int rc = 0;
1010
1011        rc = ata_host_suspend(host, mesg);
1012        if (rc)
1013                return rc;
1014
1015        /* Some braindamaged ACPI suspend implementations expect the
1016         * controller to be awake on entry; otherwise, it burns cpu
1017         * cycles and power trying to do something to the sleeping
1018         * beauty.
1019         */
1020        if (piix_broken_suspend() && (mesg.event & PM_EVENT_SLEEP)) {
1021                pci_save_state(pdev);
1022
1023                /* mark its power state as "unknown", since we don't
1024                 * know if e.g. the BIOS will change its device state
1025                 * when we suspend.
1026                 */
1027                if (pdev->current_state == PCI_D0)
1028                        pdev->current_state = PCI_UNKNOWN;
1029
1030                /* tell resume that it's waking up from broken suspend */
1031                spin_lock_irqsave(&host->lock, flags);
1032                host->flags |= PIIX_HOST_BROKEN_SUSPEND;
1033                spin_unlock_irqrestore(&host->lock, flags);
1034        } else
1035                ata_pci_device_do_suspend(pdev, mesg);
1036
1037        return 0;
1038}
1039
1040static int piix_pci_device_resume(struct pci_dev *pdev)
1041{
1042        struct ata_host *host = pci_get_drvdata(pdev);
1043        unsigned long flags;
1044        int rc;
1045
1046        if (host->flags & PIIX_HOST_BROKEN_SUSPEND) {
1047                spin_lock_irqsave(&host->lock, flags);
1048                host->flags &= ~PIIX_HOST_BROKEN_SUSPEND;
1049                spin_unlock_irqrestore(&host->lock, flags);
1050
1051                pci_set_power_state(pdev, PCI_D0);
1052                pci_restore_state(pdev);
1053
1054                /* PCI device wasn't disabled during suspend.  Use
1055                 * pci_reenable_device() to avoid affecting the enable
1056                 * count.
1057                 */
1058                rc = pci_reenable_device(pdev);
1059                if (rc)
1060                        dev_err(&pdev->dev,
1061                                "failed to enable device after resume (%d)\n",
1062                                rc);
1063        } else
1064                rc = ata_pci_device_do_resume(pdev);
1065
1066        if (rc == 0)
1067                ata_host_resume(host);
1068
1069        return rc;
1070}
1071#endif
1072
1073static u8 piix_vmw_bmdma_status(struct ata_port *ap)
1074{
1075        return ata_bmdma_status(ap) & ~ATA_DMA_ERR;
1076}
1077
1078static struct scsi_host_template piix_sht = {
1079        ATA_BMDMA_SHT(DRV_NAME),
1080};
1081
1082static struct ata_port_operations piix_sata_ops = {
1083        .inherits               = &ata_bmdma32_port_ops,
1084        .sff_irq_check          = piix_irq_check,
1085        .port_start             = piix_port_start,
1086};
1087
1088static struct ata_port_operations piix_pata_ops = {
1089        .inherits               = &piix_sata_ops,
1090        .cable_detect           = ata_cable_40wire,
1091        .set_piomode            = piix_set_piomode,
1092        .set_dmamode            = piix_set_dmamode,
1093        .prereset               = piix_pata_prereset,
1094};
1095
1096static struct ata_port_operations piix_vmw_ops = {
1097        .inherits               = &piix_pata_ops,
1098        .bmdma_status           = piix_vmw_bmdma_status,
1099};
1100
1101static struct ata_port_operations ich_pata_ops = {
1102        .inherits               = &piix_pata_ops,
1103        .cable_detect           = ich_pata_cable_detect,
1104        .set_dmamode            = ich_set_dmamode,
1105};
1106
1107static struct device_attribute *piix_sidpr_shost_attrs[] = {
1108        &dev_attr_link_power_management_policy,
1109        NULL
1110};
1111
1112static struct scsi_host_template piix_sidpr_sht = {
1113        ATA_BMDMA_SHT(DRV_NAME),
1114        .shost_attrs            = piix_sidpr_shost_attrs,
1115};
1116
1117static struct ata_port_operations piix_sidpr_sata_ops = {
1118        .inherits               = &piix_sata_ops,
1119        .hardreset              = sata_std_hardreset,
1120        .scr_read               = piix_sidpr_scr_read,
1121        .scr_write              = piix_sidpr_scr_write,
1122        .set_lpm                = piix_sidpr_set_lpm,
1123};
1124
1125static struct ata_port_info piix_port_info[] = {
1126        [piix_pata_mwdma] =     /* PIIX3 MWDMA only */
1127        {
1128                .flags          = PIIX_PATA_FLAGS,
1129                .pio_mask       = ATA_PIO4,
1130                .mwdma_mask     = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
1131                .port_ops       = &piix_pata_ops,
1132        },
1133
1134        [piix_pata_33] =        /* PIIX4 at 33MHz */
1135        {
1136                .flags          = PIIX_PATA_FLAGS,
1137                .pio_mask       = ATA_PIO4,
1138                .mwdma_mask     = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
1139                .udma_mask      = ATA_UDMA2,
1140                .port_ops       = &piix_pata_ops,
1141        },
1142
1143        [ich_pata_33] =         /* ICH0 - ICH at 33Mhz*/
1144        {
1145                .flags          = PIIX_PATA_FLAGS,
1146                .pio_mask       = ATA_PIO4,
1147                .mwdma_mask     = ATA_MWDMA12_ONLY, /* Check: maybe MWDMA0 is ok  */
1148                .udma_mask      = ATA_UDMA2,
1149                .port_ops       = &ich_pata_ops,
1150        },
1151
1152        [ich_pata_66] =         /* ICH controllers up to 66MHz */
1153        {
1154                .flags          = PIIX_PATA_FLAGS,
1155                .pio_mask       = ATA_PIO4,
1156                .mwdma_mask     = ATA_MWDMA12_ONLY, /* MWDMA0 is broken on chip */
1157                .udma_mask      = ATA_UDMA4,
1158                .port_ops       = &ich_pata_ops,
1159        },
1160
1161        [ich_pata_100] =
1162        {
1163                .flags          = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
1164                .pio_mask       = ATA_PIO4,
1165                .mwdma_mask     = ATA_MWDMA12_ONLY,
1166                .udma_mask      = ATA_UDMA5,
1167                .port_ops       = &ich_pata_ops,
1168        },
1169
1170        [ich_pata_100_nomwdma1] =
1171        {
1172                .flags          = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
1173                .pio_mask       = ATA_PIO4,
1174                .mwdma_mask     = ATA_MWDMA2_ONLY,
1175                .udma_mask      = ATA_UDMA5,
1176                .port_ops       = &ich_pata_ops,
1177        },
1178
1179        [ich5_sata] =
1180        {
1181                .flags          = PIIX_SATA_FLAGS,
1182                .pio_mask       = ATA_PIO4,
1183                .mwdma_mask     = ATA_MWDMA2,
1184                .udma_mask      = ATA_UDMA6,
1185                .port_ops       = &piix_sata_ops,
1186        },
1187
1188        [ich6_sata] =
1189        {
1190                .flags          = PIIX_SATA_FLAGS,
1191                .pio_mask       = ATA_PIO4,
1192                .mwdma_mask     = ATA_MWDMA2,
1193                .udma_mask      = ATA_UDMA6,
1194                .port_ops       = &piix_sata_ops,
1195        },
1196
1197        [ich6m_sata] =
1198        {
1199                .flags          = PIIX_SATA_FLAGS,
1200                .pio_mask       = ATA_PIO4,
1201                .mwdma_mask     = ATA_MWDMA2,
1202                .udma_mask      = ATA_UDMA6,
1203                .port_ops       = &piix_sata_ops,
1204        },
1205
1206        [ich8_sata] =
1207        {
1208                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
1209                .pio_mask       = ATA_PIO4,
1210                .mwdma_mask     = ATA_MWDMA2,
1211                .udma_mask      = ATA_UDMA6,
1212                .port_ops       = &piix_sata_ops,
1213        },
1214
1215        [ich8_2port_sata] =
1216        {
1217                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
1218                .pio_mask       = ATA_PIO4,
1219                .mwdma_mask     = ATA_MWDMA2,
1220                .udma_mask      = ATA_UDMA6,
1221                .port_ops       = &piix_sata_ops,
1222        },
1223
1224        [tolapai_sata] =
1225        {
1226                .flags          = PIIX_SATA_FLAGS,
1227                .pio_mask       = ATA_PIO4,
1228                .mwdma_mask     = ATA_MWDMA2,
1229                .udma_mask      = ATA_UDMA6,
1230                .port_ops       = &piix_sata_ops,
1231        },
1232
1233        [ich8m_apple_sata] =
1234        {
1235                .flags          = PIIX_SATA_FLAGS,
1236                .pio_mask       = ATA_PIO4,
1237                .mwdma_mask     = ATA_MWDMA2,
1238                .udma_mask      = ATA_UDMA6,
1239                .port_ops       = &piix_sata_ops,
1240        },
1241
1242        [piix_pata_vmw] =
1243        {
1244                .flags          = PIIX_PATA_FLAGS,
1245                .pio_mask       = ATA_PIO4,
1246                .mwdma_mask     = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
1247                .udma_mask      = ATA_UDMA2,
1248                .port_ops       = &piix_vmw_ops,
1249        },
1250
1251        /*
1252         * some Sandybridge chipsets have broken 32 mode up to now,
1253         * see https://bugzilla.kernel.org/show_bug.cgi?id=40592
1254         */
1255        [ich8_sata_snb] =
1256        {
1257                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16,
1258                .pio_mask       = ATA_PIO4,
1259                .mwdma_mask     = ATA_MWDMA2,
1260                .udma_mask      = ATA_UDMA6,
1261                .port_ops       = &piix_sata_ops,
1262        },
1263
1264        [ich8_2port_sata_snb] =
1265        {
1266                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR
1267                                        | PIIX_FLAG_PIO16,
1268                .pio_mask       = ATA_PIO4,
1269                .mwdma_mask     = ATA_MWDMA2,
1270                .udma_mask      = ATA_UDMA6,
1271                .port_ops       = &piix_sata_ops,
1272        },
1273
1274        [ich8_2port_sata_byt] =
1275        {
1276                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16,
1277                .pio_mask       = ATA_PIO4,
1278                .mwdma_mask     = ATA_MWDMA2,
1279                .udma_mask      = ATA_UDMA6,
1280                .port_ops       = &piix_sata_ops,
1281        },
1282
1283};
1284
1285#define AHCI_PCI_BAR 5
1286#define AHCI_GLOBAL_CTL 0x04
1287#define AHCI_ENABLE (1 << 31)
1288static int piix_disable_ahci(struct pci_dev *pdev)
1289{
1290        void __iomem *mmio;
1291        u32 tmp;
1292        int rc = 0;
1293
1294        /* BUG: pci_enable_device has not yet been called.  This
1295         * works because this device is usually set up by BIOS.
1296         */
1297
1298        if (!pci_resource_start(pdev, AHCI_PCI_BAR) ||
1299            !pci_resource_len(pdev, AHCI_PCI_BAR))
1300                return 0;
1301
1302        mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64);
1303        if (!mmio)
1304                return -ENOMEM;
1305
1306        tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
1307        if (tmp & AHCI_ENABLE) {
1308                tmp &= ~AHCI_ENABLE;
1309                iowrite32(tmp, mmio + AHCI_GLOBAL_CTL);
1310
1311                tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
1312                if (tmp & AHCI_ENABLE)
1313                        rc = -EIO;
1314        }
1315
1316        pci_iounmap(pdev, mmio);
1317        return rc;
1318}
1319
1320/**
1321 *      piix_check_450nx_errata -       Check for problem 450NX setup
1322 *      @ata_dev: the PCI device to check
1323 *
1324 *      Check for the present of 450NX errata #19 and errata #25. If
1325 *      they are found return an error code so we can turn off DMA
1326 */
1327
1328static int piix_check_450nx_errata(struct pci_dev *ata_dev)
1329{
1330        struct pci_dev *pdev = NULL;
1331        u16 cfg;
1332        int no_piix_dma = 0;
1333
1334        while ((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) {
1335                /* Look for 450NX PXB. Check for problem configurations
1336                   A PCI quirk checks bit 6 already */
1337                pci_read_config_word(pdev, 0x41, &cfg);
1338                /* Only on the original revision: IDE DMA can hang */
1339                if (pdev->revision == 0x00)
1340                        no_piix_dma = 1;
1341                /* On all revisions below 5 PXB bus lock must be disabled for IDE */
1342                else if (cfg & (1<<14) && pdev->revision < 5)
1343                        no_piix_dma = 2;
1344        }
1345        if (no_piix_dma)
1346                dev_warn(&ata_dev->dev,
1347                         "450NX errata present, disabling IDE DMA%s\n",
1348                         no_piix_dma == 2 ? " - a BIOS update may resolve this"
1349                         : "");
1350
1351        return no_piix_dma;
1352}
1353
1354static void piix_init_pcs(struct ata_host *host,
1355                          const struct piix_map_db *map_db)
1356{
1357        struct pci_dev *pdev = to_pci_dev(host->dev);
1358        u16 pcs, new_pcs;
1359
1360        pci_read_config_word(pdev, ICH5_PCS, &pcs);
1361
1362        new_pcs = pcs | map_db->port_enable;
1363
1364        if (new_pcs != pcs) {
1365                DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs);
1366                pci_write_config_word(pdev, ICH5_PCS, new_pcs);
1367                msleep(150);
1368        }
1369}
1370
1371static const int *piix_init_sata_map(struct pci_dev *pdev,
1372                                     struct ata_port_info *pinfo,
1373                                     const struct piix_map_db *map_db)
1374{
1375        const int *map;
1376        int i, invalid_map = 0;
1377        u8 map_value;
1378        char buf[32];
1379        char *p = buf, *end = buf + sizeof(buf);
1380
1381        pci_read_config_byte(pdev, ICH5_PMR, &map_value);
1382
1383        map = map_db->map[map_value & map_db->mask];
1384
1385        for (i = 0; i < 4; i++) {
1386                switch (map[i]) {
1387                case RV:
1388                        invalid_map = 1;
1389                        p += scnprintf(p, end - p, " XX");
1390                        break;
1391
1392                case NA:
1393                        p += scnprintf(p, end - p, " --");
1394                        break;
1395
1396                case IDE:
1397                        WARN_ON((i & 1) || map[i + 1] != IDE);
1398                        pinfo[i / 2] = piix_port_info[ich_pata_100];
1399                        i++;
1400                        p += scnprintf(p, end - p, " IDE IDE");
1401                        break;
1402
1403                default:
1404                        p += scnprintf(p, end - p, " P%d", map[i]);
1405                        if (i & 1)
1406                                pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS;
1407                        break;
1408                }
1409        }
1410        dev_info(&pdev->dev, "MAP [%s ]\n", buf);
1411
1412        if (invalid_map)
1413                dev_err(&pdev->dev, "invalid MAP value %u\n", map_value);
1414
1415        return map;
1416}
1417
1418static bool piix_no_sidpr(struct ata_host *host)
1419{
1420        struct pci_dev *pdev = to_pci_dev(host->dev);
1421
1422        /*
1423         * Samsung DB-P70 only has three ATA ports exposed and
1424         * curiously the unconnected first port reports link online
1425         * while not responding to SRST protocol causing excessive
1426         * detection delay.
1427         *
1428         * Unfortunately, the system doesn't carry enough DMI
1429         * information to identify the machine but does have subsystem
1430         * vendor and device set.  As it's unclear whether the
1431         * subsystem vendor/device is used only for this specific
1432         * board, the port can't be disabled solely with the
1433         * information; however, turning off SIDPR access works around
1434         * the problem.  Turn it off.
1435         *
1436         * This problem is reported in bnc#441240.
1437         *
1438         * https://bugzilla.novell.com/show_bug.cgi?id=441420
1439         */
1440        if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
1441            pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
1442            pdev->subsystem_device == 0xb049) {
1443                dev_warn(host->dev,
1444                         "Samsung DB-P70 detected, disabling SIDPR\n");
1445                return true;
1446        }
1447
1448        return false;
1449}
1450
1451static int piix_init_sidpr(struct ata_host *host)
1452{
1453        struct pci_dev *pdev = to_pci_dev(host->dev);
1454        struct piix_host_priv *hpriv = host->private_data;
1455        struct ata_link *link0 = &host->ports[0]->link;
1456        u32 scontrol;
1457        int i, rc;
1458
1459        /* check for availability */
1460        for (i = 0; i < 4; i++)
1461                if (hpriv->map[i] == IDE)
1462                        return 0;
1463
1464        /* is it blacklisted? */
1465        if (piix_no_sidpr(host))
1466                return 0;
1467
1468        if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
1469                return 0;
1470
1471        if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 ||
1472            pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN)
1473                return 0;
1474
1475        if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME))
1476                return 0;
1477
1478        hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR];
1479
1480        /* SCR access via SIDPR doesn't work on some configurations.
1481         * Give it a test drive by inhibiting power save modes which
1482         * we'll do anyway.
1483         */
1484        piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
1485
1486        /* if IPM is already 3, SCR access is probably working.  Don't
1487         * un-inhibit power save modes as BIOS might have inhibited
1488         * them for a reason.
1489         */
1490        if ((scontrol & 0xf00) != 0x300) {
1491                scontrol |= 0x300;
1492                piix_sidpr_scr_write(link0, SCR_CONTROL, scontrol);
1493                piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
1494
1495                if ((scontrol & 0xf00) != 0x300) {
1496                        dev_info(host->dev,
1497                                 "SCR access via SIDPR is available but doesn't work\n");
1498                        return 0;
1499                }
1500        }
1501
1502        /* okay, SCRs available, set ops and ask libata for slave_link */
1503        for (i = 0; i < 2; i++) {
1504                struct ata_port *ap = host->ports[i];
1505
1506                ap->ops = &piix_sidpr_sata_ops;
1507
1508                if (ap->flags & ATA_FLAG_SLAVE_POSS) {
1509                        rc = ata_slave_link_init(ap);
1510                        if (rc)
1511                                return rc;
1512                }
1513        }
1514
1515        return 0;
1516}
1517
1518static void piix_iocfg_bit18_quirk(struct ata_host *host)
1519{
1520        static const struct dmi_system_id sysids[] = {
1521                {
1522                        /* Clevo M570U sets IOCFG bit 18 if the cdrom
1523                         * isn't used to boot the system which
1524                         * disables the channel.
1525                         */
1526                        .ident = "M570U",
1527                        .matches = {
1528                                DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
1529                                DMI_MATCH(DMI_PRODUCT_NAME, "M570U"),
1530                        },
1531                },
1532
1533                { }     /* terminate list */
1534        };
1535        struct pci_dev *pdev = to_pci_dev(host->dev);
1536        struct piix_host_priv *hpriv = host->private_data;
1537
1538        if (!dmi_check_system(sysids))
1539                return;
1540
1541        /* The datasheet says that bit 18 is NOOP but certain systems
1542         * seem to use it to disable a channel.  Clear the bit on the
1543         * affected systems.
1544         */
1545        if (hpriv->saved_iocfg & (1 << 18)) {
1546                dev_info(&pdev->dev, "applying IOCFG bit18 quirk\n");
1547                pci_write_config_dword(pdev, PIIX_IOCFG,
1548                                       hpriv->saved_iocfg & ~(1 << 18));
1549        }
1550}
1551
1552static bool piix_broken_system_poweroff(struct pci_dev *pdev)
1553{
1554        static const struct dmi_system_id broken_systems[] = {
1555                {
1556                        .ident = "HP Compaq 2510p",
1557                        .matches = {
1558                                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1559                                DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"),
1560                        },
1561                        /* PCI slot number of the controller */
1562                        .driver_data = (void *)0x1FUL,
1563                },
1564                {
1565                        .ident = "HP Compaq nc6000",
1566                        .matches = {
1567                                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1568                                DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6000"),
1569                        },
1570                        /* PCI slot number of the controller */
1571                        .driver_data = (void *)0x1FUL,
1572                },
1573
1574                { }     /* terminate list */
1575        };
1576        const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
1577
1578        if (dmi) {
1579                unsigned long slot = (unsigned long)dmi->driver_data;
1580                /* apply the quirk only to on-board controllers */
1581                return slot == PCI_SLOT(pdev->devfn);
1582        }
1583
1584        return false;
1585}
1586
1587static int prefer_ms_hyperv = 1;
1588module_param(prefer_ms_hyperv, int, 0);
1589MODULE_PARM_DESC(prefer_ms_hyperv,
1590        "Prefer Hyper-V paravirtualization drivers instead of ATA, "
1591        "0 - Use ATA drivers, "
1592        "1 (Default) - Use the paravirtualization drivers.");
1593
1594static void piix_ignore_devices_quirk(struct ata_host *host)
1595{
1596#if IS_ENABLED(CONFIG_HYPERV_STORAGE)
1597        static const struct dmi_system_id ignore_hyperv[] = {
1598                {
1599                        /* On Hyper-V hypervisors the disks are exposed on
1600                         * both the emulated SATA controller and on the
1601                         * paravirtualised drivers.  The CD/DVD devices
1602                         * are only exposed on the emulated controller.
1603                         * Request we ignore ATA devices on this host.
1604                         */
1605                        .ident = "Hyper-V Virtual Machine",
1606                        .matches = {
1607                                DMI_MATCH(DMI_SYS_VENDOR,
1608                                                "Microsoft Corporation"),
1609                                DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
1610                        },
1611                },
1612                { }     /* terminate list */
1613        };
1614        static const struct dmi_system_id allow_virtual_pc[] = {
1615                {
1616                        /* In MS Virtual PC guests the DMI ident is nearly
1617                         * identical to a Hyper-V guest. One difference is the
1618                         * product version which is used here to identify
1619                         * a Virtual PC guest. This entry allows ata_piix to
1620                         * drive the emulated hardware.
1621                         */
1622                        .ident = "MS Virtual PC 2007",
1623                        .matches = {
1624                                DMI_MATCH(DMI_SYS_VENDOR,
1625                                                "Microsoft Corporation"),
1626                                DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
1627                                DMI_MATCH(DMI_PRODUCT_VERSION, "VS2005R2"),
1628                        },
1629                },
1630                { }     /* terminate list */
1631        };
1632        const struct dmi_system_id *ignore = dmi_first_match(ignore_hyperv);
1633        const struct dmi_system_id *allow = dmi_first_match(allow_virtual_pc);
1634
1635        if (ignore && !allow && prefer_ms_hyperv) {
1636                host->flags |= ATA_HOST_IGNORE_ATA;
1637                dev_info(host->dev, "%s detected, ATA device ignore set\n",
1638                        ignore->ident);
1639        }
1640#endif
1641}
1642
1643/**
1644 *      piix_init_one - Register PIIX ATA PCI device with kernel services
1645 *      @pdev: PCI device to register
1646 *      @ent: Entry in piix_pci_tbl matching with @pdev
1647 *
1648 *      Called from kernel PCI layer.  We probe for combined mode (sigh),
1649 *      and then hand over control to libata, for it to do the rest.
1650 *
1651 *      LOCKING:
1652 *      Inherited from PCI layer (may sleep).
1653 *
1654 *      RETURNS:
1655 *      Zero on success, or -ERRNO value.
1656 */
1657
1658static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1659{
1660        struct device *dev = &pdev->dev;
1661        struct ata_port_info port_info[2];
1662        const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
1663        struct scsi_host_template *sht = &piix_sht;
1664        unsigned long port_flags;
1665        struct ata_host *host;
1666        struct piix_host_priv *hpriv;
1667        int rc;
1668
1669        ata_print_version_once(&pdev->dev, DRV_VERSION);
1670
1671        /* no hotplugging support for later devices (FIXME) */
1672        if (!in_module_init && ent->driver_data >= ich5_sata)
1673                return -ENODEV;
1674
1675        if (piix_broken_system_poweroff(pdev)) {
1676                piix_port_info[ent->driver_data].flags |=
1677                                ATA_FLAG_NO_POWEROFF_SPINDOWN |
1678                                        ATA_FLAG_NO_HIBERNATE_SPINDOWN;
1679                dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
1680                                "on poweroff and hibernation\n");
1681        }
1682
1683        port_info[0] = piix_port_info[ent->driver_data];
1684        port_info[1] = piix_port_info[ent->driver_data];
1685
1686        port_flags = port_info[0].flags;
1687
1688        /* enable device and prepare host */
1689        rc = pcim_enable_device(pdev);
1690        if (rc)
1691                return rc;
1692
1693        hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
1694        if (!hpriv)
1695                return -ENOMEM;
1696
1697        /* Save IOCFG, this will be used for cable detection, quirk
1698         * detection and restoration on detach.  This is necessary
1699         * because some ACPI implementations mess up cable related
1700         * bits on _STM.  Reported on kernel bz#11879.
1701         */
1702        pci_read_config_dword(pdev, PIIX_IOCFG, &hpriv->saved_iocfg);
1703
1704        /* ICH6R may be driven by either ata_piix or ahci driver
1705         * regardless of BIOS configuration.  Make sure AHCI mode is
1706         * off.
1707         */
1708        if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
1709                rc = piix_disable_ahci(pdev);
1710                if (rc)
1711                        return rc;
1712        }
1713
1714        /* SATA map init can change port_info, do it before prepping host */
1715        if (port_flags & ATA_FLAG_SATA)
1716                hpriv->map = piix_init_sata_map(pdev, port_info,
1717                                        piix_map_db_table[ent->driver_data]);
1718
1719        rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
1720        if (rc)
1721                return rc;
1722        host->private_data = hpriv;
1723
1724        /* initialize controller */
1725        if (port_flags & ATA_FLAG_SATA) {
1726                piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
1727                rc = piix_init_sidpr(host);
1728                if (rc)
1729                        return rc;
1730                if (host->ports[0]->ops == &piix_sidpr_sata_ops)
1731                        sht = &piix_sidpr_sht;
1732        }
1733
1734        /* apply IOCFG bit18 quirk */
1735        piix_iocfg_bit18_quirk(host);
1736
1737        /* On ICH5, some BIOSen disable the interrupt using the
1738         * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
1739         * On ICH6, this bit has the same effect, but only when
1740         * MSI is disabled (and it is disabled, as we don't use
1741         * message-signalled interrupts currently).
1742         */
1743        if (port_flags & PIIX_FLAG_CHECKINTR)
1744                pci_intx(pdev, 1);
1745
1746        if (piix_check_450nx_errata(pdev)) {
1747                /* This writes into the master table but it does not
1748                   really matter for this errata as we will apply it to
1749                   all the PIIX devices on the board */
1750                host->ports[0]->mwdma_mask = 0;
1751                host->ports[0]->udma_mask = 0;
1752                host->ports[1]->mwdma_mask = 0;
1753                host->ports[1]->udma_mask = 0;
1754        }
1755        host->flags |= ATA_HOST_PARALLEL_SCAN;
1756
1757        /* Allow hosts to specify device types to ignore when scanning. */
1758        piix_ignore_devices_quirk(host);
1759
1760        pci_set_master(pdev);
1761        return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
1762}
1763
1764static void piix_remove_one(struct pci_dev *pdev)
1765{
1766        struct ata_host *host = pci_get_drvdata(pdev);
1767        struct piix_host_priv *hpriv = host->private_data;
1768
1769        pci_write_config_dword(pdev, PIIX_IOCFG, hpriv->saved_iocfg);
1770
1771        ata_pci_remove_one(pdev);
1772}
1773
1774static struct pci_driver piix_pci_driver = {
1775        .name                   = DRV_NAME,
1776        .id_table               = piix_pci_tbl,
1777        .probe                  = piix_init_one,
1778        .remove                 = piix_remove_one,
1779#ifdef CONFIG_PM_SLEEP
1780        .suspend                = piix_pci_device_suspend,
1781        .resume                 = piix_pci_device_resume,
1782#endif
1783};
1784
1785static int __init piix_init(void)
1786{
1787        int rc;
1788
1789        DPRINTK("pci_register_driver\n");
1790        rc = pci_register_driver(&piix_pci_driver);
1791        if (rc)
1792                return rc;
1793
1794        in_module_init = 0;
1795
1796        DPRINTK("done\n");
1797        return 0;
1798}
1799
1800static void __exit piix_exit(void)
1801{
1802        pci_unregister_driver(&piix_pci_driver);
1803}
1804
1805module_init(piix_init);
1806module_exit(piix_exit);
1807