linux/drivers/net/ethernet/smsc/smsc911x.c
<<
>>
Prefs
   1/***************************************************************************
   2 *
   3 * Copyright (C) 2004-2008 SMSC
   4 * Copyright (C) 2005-2008 ARM
   5 *
   6 * This program is free software; you can redistribute it and/or
   7 * modify it under the terms of the GNU General Public License
   8 * as published by the Free Software Foundation; either version 2
   9 * of the License, or (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 *
  16 * You should have received a copy of the GNU General Public License
  17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
  18 *
  19 ***************************************************************************
  20 * Rewritten, heavily based on smsc911x simple driver by SMSC.
  21 * Partly uses io macros from smc91x.c by Nicolas Pitre
  22 *
  23 * Supported devices:
  24 *   LAN9115, LAN9116, LAN9117, LAN9118
  25 *   LAN9215, LAN9216, LAN9217, LAN9218
  26 *   LAN9210, LAN9211
  27 *   LAN9220, LAN9221
  28 *   LAN89218,LAN9250
  29 *
  30 */
  31
  32#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  33
  34#include <linux/crc32.h>
  35#include <linux/clk.h>
  36#include <linux/delay.h>
  37#include <linux/errno.h>
  38#include <linux/etherdevice.h>
  39#include <linux/ethtool.h>
  40#include <linux/init.h>
  41#include <linux/interrupt.h>
  42#include <linux/ioport.h>
  43#include <linux/kernel.h>
  44#include <linux/module.h>
  45#include <linux/netdevice.h>
  46#include <linux/platform_device.h>
  47#include <linux/regulator/consumer.h>
  48#include <linux/sched.h>
  49#include <linux/timer.h>
  50#include <linux/bug.h>
  51#include <linux/bitops.h>
  52#include <linux/irq.h>
  53#include <linux/io.h>
  54#include <linux/swab.h>
  55#include <linux/phy.h>
  56#include <linux/smsc911x.h>
  57#include <linux/device.h>
  58#include <linux/of.h>
  59#include <linux/of_device.h>
  60#include <linux/of_gpio.h>
  61#include <linux/of_net.h>
  62#include <linux/acpi.h>
  63#include <linux/pm_runtime.h>
  64#include <linux/property.h>
  65#include <linux/gpio/consumer.h>
  66
  67#include "smsc911x.h"
  68
  69#define SMSC_CHIPNAME           "smsc911x"
  70#define SMSC_MDIONAME           "smsc911x-mdio"
  71#define SMSC_DRV_VERSION        "2008-10-21"
  72
  73MODULE_LICENSE("GPL");
  74MODULE_VERSION(SMSC_DRV_VERSION);
  75MODULE_ALIAS("platform:smsc911x");
  76
  77#if USE_DEBUG > 0
  78static int debug = 16;
  79#else
  80static int debug = 3;
  81#endif
  82
  83module_param(debug, int, 0);
  84MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
  85
  86struct smsc911x_data;
  87
  88struct smsc911x_ops {
  89        u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg);
  90        void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val);
  91        void (*rx_readfifo)(struct smsc911x_data *pdata,
  92                                unsigned int *buf, unsigned int wordcount);
  93        void (*tx_writefifo)(struct smsc911x_data *pdata,
  94                                unsigned int *buf, unsigned int wordcount);
  95};
  96
  97#define SMSC911X_NUM_SUPPLIES 2
  98
  99struct smsc911x_data {
 100        void __iomem *ioaddr;
 101
 102        unsigned int idrev;
 103
 104        /* used to decide which workarounds apply */
 105        unsigned int generation;
 106
 107        /* device configuration (copied from platform_data during probe) */
 108        struct smsc911x_platform_config config;
 109
 110        /* This needs to be acquired before calling any of below:
 111         * smsc911x_mac_read(), smsc911x_mac_write()
 112         */
 113        spinlock_t mac_lock;
 114
 115        /* spinlock to ensure register accesses are serialised */
 116        spinlock_t dev_lock;
 117
 118        struct mii_bus *mii_bus;
 119        unsigned int using_extphy;
 120        int last_duplex;
 121        int last_carrier;
 122
 123        u32 msg_enable;
 124        unsigned int gpio_setting;
 125        unsigned int gpio_orig_setting;
 126        struct net_device *dev;
 127        struct napi_struct napi;
 128
 129        unsigned int software_irq_signal;
 130
 131#ifdef USE_PHY_WORK_AROUND
 132#define MIN_PACKET_SIZE (64)
 133        char loopback_tx_pkt[MIN_PACKET_SIZE];
 134        char loopback_rx_pkt[MIN_PACKET_SIZE];
 135        unsigned int resetcount;
 136#endif
 137
 138        /* Members for Multicast filter workaround */
 139        unsigned int multicast_update_pending;
 140        unsigned int set_bits_mask;
 141        unsigned int clear_bits_mask;
 142        unsigned int hashhi;
 143        unsigned int hashlo;
 144
 145        /* register access functions */
 146        const struct smsc911x_ops *ops;
 147
 148        /* regulators */
 149        struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES];
 150
 151        /* Reset GPIO */
 152        struct gpio_desc *reset_gpiod;
 153
 154        /* clock */
 155        struct clk *clk;
 156};
 157
 158/* Easy access to information */
 159#define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift))
 160
 161static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 162{
 163        if (pdata->config.flags & SMSC911X_USE_32BIT)
 164                return readl(pdata->ioaddr + reg);
 165
 166        if (pdata->config.flags & SMSC911X_USE_16BIT)
 167                return ((readw(pdata->ioaddr + reg) & 0xFFFF) |
 168                        ((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16));
 169
 170        BUG();
 171        return 0;
 172}
 173
 174static inline u32
 175__smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg)
 176{
 177        if (pdata->config.flags & SMSC911X_USE_32BIT)
 178                return readl(pdata->ioaddr + __smsc_shift(pdata, reg));
 179
 180        if (pdata->config.flags & SMSC911X_USE_16BIT)
 181                return (readw(pdata->ioaddr +
 182                                __smsc_shift(pdata, reg)) & 0xFFFF) |
 183                        ((readw(pdata->ioaddr +
 184                        __smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16);
 185
 186        BUG();
 187        return 0;
 188}
 189
 190static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 191{
 192        u32 data;
 193        unsigned long flags;
 194
 195        spin_lock_irqsave(&pdata->dev_lock, flags);
 196        data = pdata->ops->reg_read(pdata, reg);
 197        spin_unlock_irqrestore(&pdata->dev_lock, flags);
 198
 199        return data;
 200}
 201
 202static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
 203                                        u32 val)
 204{
 205        if (pdata->config.flags & SMSC911X_USE_32BIT) {
 206                writel(val, pdata->ioaddr + reg);
 207                return;
 208        }
 209
 210        if (pdata->config.flags & SMSC911X_USE_16BIT) {
 211                writew(val & 0xFFFF, pdata->ioaddr + reg);
 212                writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2);
 213                return;
 214        }
 215
 216        BUG();
 217}
 218
 219static inline void
 220__smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val)
 221{
 222        if (pdata->config.flags & SMSC911X_USE_32BIT) {
 223                writel(val, pdata->ioaddr + __smsc_shift(pdata, reg));
 224                return;
 225        }
 226
 227        if (pdata->config.flags & SMSC911X_USE_16BIT) {
 228                writew(val & 0xFFFF,
 229                        pdata->ioaddr + __smsc_shift(pdata, reg));
 230                writew((val >> 16) & 0xFFFF,
 231                        pdata->ioaddr + __smsc_shift(pdata, reg + 2));
 232                return;
 233        }
 234
 235        BUG();
 236}
 237
 238static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
 239                                      u32 val)
 240{
 241        unsigned long flags;
 242
 243        spin_lock_irqsave(&pdata->dev_lock, flags);
 244        pdata->ops->reg_write(pdata, reg, val);
 245        spin_unlock_irqrestore(&pdata->dev_lock, flags);
 246}
 247
 248/* Writes a packet to the TX_DATA_FIFO */
 249static inline void
 250smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf,
 251                      unsigned int wordcount)
 252{
 253        unsigned long flags;
 254
 255        spin_lock_irqsave(&pdata->dev_lock, flags);
 256
 257        if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
 258                while (wordcount--)
 259                        __smsc911x_reg_write(pdata, TX_DATA_FIFO,
 260                                             swab32(*buf++));
 261                goto out;
 262        }
 263
 264        if (pdata->config.flags & SMSC911X_USE_32BIT) {
 265                iowrite32_rep(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount);
 266                goto out;
 267        }
 268
 269        if (pdata->config.flags & SMSC911X_USE_16BIT) {
 270                while (wordcount--)
 271                        __smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++);
 272                goto out;
 273        }
 274
 275        BUG();
 276out:
 277        spin_unlock_irqrestore(&pdata->dev_lock, flags);
 278}
 279
 280/* Writes a packet to the TX_DATA_FIFO - shifted version */
 281static inline void
 282smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
 283                      unsigned int wordcount)
 284{
 285        unsigned long flags;
 286
 287        spin_lock_irqsave(&pdata->dev_lock, flags);
 288
 289        if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
 290                while (wordcount--)
 291                        __smsc911x_reg_write_shift(pdata, TX_DATA_FIFO,
 292                                             swab32(*buf++));
 293                goto out;
 294        }
 295
 296        if (pdata->config.flags & SMSC911X_USE_32BIT) {
 297                iowrite32_rep(pdata->ioaddr + __smsc_shift(pdata,
 298                                                TX_DATA_FIFO), buf, wordcount);
 299                goto out;
 300        }
 301
 302        if (pdata->config.flags & SMSC911X_USE_16BIT) {
 303                while (wordcount--)
 304                        __smsc911x_reg_write_shift(pdata,
 305                                                 TX_DATA_FIFO, *buf++);
 306                goto out;
 307        }
 308
 309        BUG();
 310out:
 311        spin_unlock_irqrestore(&pdata->dev_lock, flags);
 312}
 313
 314/* Reads a packet out of the RX_DATA_FIFO */
 315static inline void
 316smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
 317                     unsigned int wordcount)
 318{
 319        unsigned long flags;
 320
 321        spin_lock_irqsave(&pdata->dev_lock, flags);
 322
 323        if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
 324                while (wordcount--)
 325                        *buf++ = swab32(__smsc911x_reg_read(pdata,
 326                                                            RX_DATA_FIFO));
 327                goto out;
 328        }
 329
 330        if (pdata->config.flags & SMSC911X_USE_32BIT) {
 331                ioread32_rep(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount);
 332                goto out;
 333        }
 334
 335        if (pdata->config.flags & SMSC911X_USE_16BIT) {
 336                while (wordcount--)
 337                        *buf++ = __smsc911x_reg_read(pdata, RX_DATA_FIFO);
 338                goto out;
 339        }
 340
 341        BUG();
 342out:
 343        spin_unlock_irqrestore(&pdata->dev_lock, flags);
 344}
 345
 346/* Reads a packet out of the RX_DATA_FIFO - shifted version */
 347static inline void
 348smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
 349                     unsigned int wordcount)
 350{
 351        unsigned long flags;
 352
 353        spin_lock_irqsave(&pdata->dev_lock, flags);
 354
 355        if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
 356                while (wordcount--)
 357                        *buf++ = swab32(__smsc911x_reg_read_shift(pdata,
 358                                                            RX_DATA_FIFO));
 359                goto out;
 360        }
 361
 362        if (pdata->config.flags & SMSC911X_USE_32BIT) {
 363                ioread32_rep(pdata->ioaddr + __smsc_shift(pdata,
 364                                                RX_DATA_FIFO), buf, wordcount);
 365                goto out;
 366        }
 367
 368        if (pdata->config.flags & SMSC911X_USE_16BIT) {
 369                while (wordcount--)
 370                        *buf++ = __smsc911x_reg_read_shift(pdata,
 371                                                                RX_DATA_FIFO);
 372                goto out;
 373        }
 374
 375        BUG();
 376out:
 377        spin_unlock_irqrestore(&pdata->dev_lock, flags);
 378}
 379
 380/*
 381 * enable regulator and clock resources.
 382 */
 383static int smsc911x_enable_resources(struct platform_device *pdev)
 384{
 385        struct net_device *ndev = platform_get_drvdata(pdev);
 386        struct smsc911x_data *pdata = netdev_priv(ndev);
 387        int ret = 0;
 388
 389        ret = regulator_bulk_enable(ARRAY_SIZE(pdata->supplies),
 390                        pdata->supplies);
 391        if (ret)
 392                netdev_err(ndev, "failed to enable regulators %d\n",
 393                                ret);
 394
 395        if (!IS_ERR(pdata->clk)) {
 396                ret = clk_prepare_enable(pdata->clk);
 397                if (ret < 0)
 398                        netdev_err(ndev, "failed to enable clock %d\n", ret);
 399        }
 400
 401        return ret;
 402}
 403
 404/*
 405 * disable resources, currently just regulators.
 406 */
 407static int smsc911x_disable_resources(struct platform_device *pdev)
 408{
 409        struct net_device *ndev = platform_get_drvdata(pdev);
 410        struct smsc911x_data *pdata = netdev_priv(ndev);
 411        int ret = 0;
 412
 413        ret = regulator_bulk_disable(ARRAY_SIZE(pdata->supplies),
 414                        pdata->supplies);
 415
 416        if (!IS_ERR(pdata->clk))
 417                clk_disable_unprepare(pdata->clk);
 418
 419        return ret;
 420}
 421
 422/*
 423 * Request resources, currently just regulators.
 424 *
 425 * The SMSC911x has two power pins: vddvario and vdd33a, in designs where
 426 * these are not always-on we need to request regulators to be turned on
 427 * before we can try to access the device registers.
 428 */
 429static int smsc911x_request_resources(struct platform_device *pdev)
 430{
 431        struct net_device *ndev = platform_get_drvdata(pdev);
 432        struct smsc911x_data *pdata = netdev_priv(ndev);
 433        int ret = 0;
 434
 435        /* Request regulators */
 436        pdata->supplies[0].supply = "vdd33a";
 437        pdata->supplies[1].supply = "vddvario";
 438        ret = regulator_bulk_get(&pdev->dev,
 439                        ARRAY_SIZE(pdata->supplies),
 440                        pdata->supplies);
 441        if (ret) {
 442                /*
 443                 * Retry on deferrals, else just report the error
 444                 * and try to continue.
 445                 */
 446                if (ret == -EPROBE_DEFER)
 447                        return ret;
 448                netdev_err(ndev, "couldn't get regulators %d\n",
 449                                ret);
 450        }
 451
 452        /* Request optional RESET GPIO */
 453        pdata->reset_gpiod = devm_gpiod_get_optional(&pdev->dev,
 454                                                     "reset",
 455                                                     GPIOD_OUT_LOW);
 456
 457        /* Request clock */
 458        pdata->clk = clk_get(&pdev->dev, NULL);
 459        if (IS_ERR(pdata->clk))
 460                dev_dbg(&pdev->dev, "couldn't get clock %li\n",
 461                        PTR_ERR(pdata->clk));
 462
 463        return ret;
 464}
 465
 466/*
 467 * Free resources, currently just regulators.
 468 *
 469 */
 470static void smsc911x_free_resources(struct platform_device *pdev)
 471{
 472        struct net_device *ndev = platform_get_drvdata(pdev);
 473        struct smsc911x_data *pdata = netdev_priv(ndev);
 474
 475        /* Free regulators */
 476        regulator_bulk_free(ARRAY_SIZE(pdata->supplies),
 477                        pdata->supplies);
 478
 479        /* Free clock */
 480        if (!IS_ERR(pdata->clk)) {
 481                clk_put(pdata->clk);
 482                pdata->clk = NULL;
 483        }
 484}
 485
 486/* waits for MAC not busy, with timeout.  Only called by smsc911x_mac_read
 487 * and smsc911x_mac_write, so assumes mac_lock is held */
 488static int smsc911x_mac_complete(struct smsc911x_data *pdata)
 489{
 490        int i;
 491        u32 val;
 492
 493        SMSC_ASSERT_MAC_LOCK(pdata);
 494
 495        for (i = 0; i < 40; i++) {
 496                val = smsc911x_reg_read(pdata, MAC_CSR_CMD);
 497                if (!(val & MAC_CSR_CMD_CSR_BUSY_))
 498                        return 0;
 499        }
 500        SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. "
 501                  "MAC_CSR_CMD: 0x%08X", val);
 502        return -EIO;
 503}
 504
 505/* Fetches a MAC register value. Assumes mac_lock is acquired */
 506static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset)
 507{
 508        unsigned int temp;
 509
 510        SMSC_ASSERT_MAC_LOCK(pdata);
 511
 512        temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
 513        if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
 514                SMSC_WARN(pdata, hw, "MAC busy at entry");
 515                return 0xFFFFFFFF;
 516        }
 517
 518        /* Send the MAC cmd */
 519        smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) |
 520                MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_));
 521
 522        /* Workaround for hardware read-after-write restriction */
 523        temp = smsc911x_reg_read(pdata, BYTE_TEST);
 524
 525        /* Wait for the read to complete */
 526        if (likely(smsc911x_mac_complete(pdata) == 0))
 527                return smsc911x_reg_read(pdata, MAC_CSR_DATA);
 528
 529        SMSC_WARN(pdata, hw, "MAC busy after read");
 530        return 0xFFFFFFFF;
 531}
 532
 533/* Set a mac register, mac_lock must be acquired before calling */
 534static void smsc911x_mac_write(struct smsc911x_data *pdata,
 535                               unsigned int offset, u32 val)
 536{
 537        unsigned int temp;
 538
 539        SMSC_ASSERT_MAC_LOCK(pdata);
 540
 541        temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
 542        if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
 543                SMSC_WARN(pdata, hw,
 544                          "smsc911x_mac_write failed, MAC busy at entry");
 545                return;
 546        }
 547
 548        /* Send data to write */
 549        smsc911x_reg_write(pdata, MAC_CSR_DATA, val);
 550
 551        /* Write the actual data */
 552        smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) |
 553                MAC_CSR_CMD_CSR_BUSY_));
 554
 555        /* Workaround for hardware read-after-write restriction */
 556        temp = smsc911x_reg_read(pdata, BYTE_TEST);
 557
 558        /* Wait for the write to complete */
 559        if (likely(smsc911x_mac_complete(pdata) == 0))
 560                return;
 561
 562        SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write");
 563}
 564
 565/* Get a phy register */
 566static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
 567{
 568        struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv;
 569        unsigned long flags;
 570        unsigned int addr;
 571        int i, reg;
 572
 573        spin_lock_irqsave(&pdata->mac_lock, flags);
 574
 575        /* Confirm MII not busy */
 576        if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
 577                SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???");
 578                reg = -EIO;
 579                goto out;
 580        }
 581
 582        /* Set the address, index & direction (read from PHY) */
 583        addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6);
 584        smsc911x_mac_write(pdata, MII_ACC, addr);
 585
 586        /* Wait for read to complete w/ timeout */
 587        for (i = 0; i < 100; i++)
 588                if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
 589                        reg = smsc911x_mac_read(pdata, MII_DATA);
 590                        goto out;
 591                }
 592
 593        SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish");
 594        reg = -EIO;
 595
 596out:
 597        spin_unlock_irqrestore(&pdata->mac_lock, flags);
 598        return reg;
 599}
 600
 601/* Set a phy register */
 602static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
 603                           u16 val)
 604{
 605        struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv;
 606        unsigned long flags;
 607        unsigned int addr;
 608        int i, reg;
 609
 610        spin_lock_irqsave(&pdata->mac_lock, flags);
 611
 612        /* Confirm MII not busy */
 613        if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
 614                SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???");
 615                reg = -EIO;
 616                goto out;
 617        }
 618
 619        /* Put the data to write in the MAC */
 620        smsc911x_mac_write(pdata, MII_DATA, val);
 621
 622        /* Set the address, index & direction (write to PHY) */
 623        addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) |
 624                MII_ACC_MII_WRITE_;
 625        smsc911x_mac_write(pdata, MII_ACC, addr);
 626
 627        /* Wait for write to complete w/ timeout */
 628        for (i = 0; i < 100; i++)
 629                if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
 630                        reg = 0;
 631                        goto out;
 632                }
 633
 634        SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish");
 635        reg = -EIO;
 636
 637out:
 638        spin_unlock_irqrestore(&pdata->mac_lock, flags);
 639        return reg;
 640}
 641
 642/* Switch to external phy. Assumes tx and rx are stopped. */
 643static void smsc911x_phy_enable_external(struct smsc911x_data *pdata)
 644{
 645        unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
 646
 647        /* Disable phy clocks to the MAC */
 648        hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
 649        hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
 650        smsc911x_reg_write(pdata, HW_CFG, hwcfg);
 651        udelay(10);     /* Enough time for clocks to stop */
 652
 653        /* Switch to external phy */
 654        hwcfg |= HW_CFG_EXT_PHY_EN_;
 655        smsc911x_reg_write(pdata, HW_CFG, hwcfg);
 656
 657        /* Enable phy clocks to the MAC */
 658        hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
 659        hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
 660        smsc911x_reg_write(pdata, HW_CFG, hwcfg);
 661        udelay(10);     /* Enough time for clocks to restart */
 662
 663        hwcfg |= HW_CFG_SMI_SEL_;
 664        smsc911x_reg_write(pdata, HW_CFG, hwcfg);
 665}
 666
 667/* Autodetects and enables external phy if present on supported chips.
 668 * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY
 669 * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */
 670static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata)
 671{
 672        unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
 673
 674        if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) {
 675                SMSC_TRACE(pdata, hw, "Forcing internal PHY");
 676                pdata->using_extphy = 0;
 677        } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) {
 678                SMSC_TRACE(pdata, hw, "Forcing external PHY");
 679                smsc911x_phy_enable_external(pdata);
 680                pdata->using_extphy = 1;
 681        } else if (hwcfg & HW_CFG_EXT_PHY_DET_) {
 682                SMSC_TRACE(pdata, hw,
 683                           "HW_CFG EXT_PHY_DET set, using external PHY");
 684                smsc911x_phy_enable_external(pdata);
 685                pdata->using_extphy = 1;
 686        } else {
 687                SMSC_TRACE(pdata, hw,
 688                           "HW_CFG EXT_PHY_DET clear, using internal PHY");
 689                pdata->using_extphy = 0;
 690        }
 691}
 692
 693/* Fetches a tx status out of the status fifo */
 694static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata)
 695{
 696        unsigned int result =
 697            smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_;
 698
 699        if (result != 0)
 700                result = smsc911x_reg_read(pdata, TX_STATUS_FIFO);
 701
 702        return result;
 703}
 704
 705/* Fetches the next rx status */
 706static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata)
 707{
 708        unsigned int result =
 709            smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_;
 710
 711        if (result != 0)
 712                result = smsc911x_reg_read(pdata, RX_STATUS_FIFO);
 713
 714        return result;
 715}
 716
 717#ifdef USE_PHY_WORK_AROUND
 718static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
 719{
 720        unsigned int tries;
 721        u32 wrsz;
 722        u32 rdsz;
 723        ulong bufp;
 724
 725        for (tries = 0; tries < 10; tries++) {
 726                unsigned int txcmd_a;
 727                unsigned int txcmd_b;
 728                unsigned int status;
 729                unsigned int pktlength;
 730                unsigned int i;
 731
 732                /* Zero-out rx packet memory */
 733                memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE);
 734
 735                /* Write tx packet to 118 */
 736                txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16;
 737                txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
 738                txcmd_a |= MIN_PACKET_SIZE;
 739
 740                txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE;
 741
 742                smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a);
 743                smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b);
 744
 745                bufp = (ulong)pdata->loopback_tx_pkt & (~0x3);
 746                wrsz = MIN_PACKET_SIZE + 3;
 747                wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3);
 748                wrsz >>= 2;
 749
 750                pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
 751
 752                /* Wait till transmit is done */
 753                i = 60;
 754                do {
 755                        udelay(5);
 756                        status = smsc911x_tx_get_txstatus(pdata);
 757                } while ((i--) && (!status));
 758
 759                if (!status) {
 760                        SMSC_WARN(pdata, hw,
 761                                  "Failed to transmit during loopback test");
 762                        continue;
 763                }
 764                if (status & TX_STS_ES_) {
 765                        SMSC_WARN(pdata, hw,
 766                                  "Transmit encountered errors during loopback test");
 767                        continue;
 768                }
 769
 770                /* Wait till receive is done */
 771                i = 60;
 772                do {
 773                        udelay(5);
 774                        status = smsc911x_rx_get_rxstatus(pdata);
 775                } while ((i--) && (!status));
 776
 777                if (!status) {
 778                        SMSC_WARN(pdata, hw,
 779                                  "Failed to receive during loopback test");
 780                        continue;
 781                }
 782                if (status & RX_STS_ES_) {
 783                        SMSC_WARN(pdata, hw,
 784                                  "Receive encountered errors during loopback test");
 785                        continue;
 786                }
 787
 788                pktlength = ((status & 0x3FFF0000UL) >> 16);
 789                bufp = (ulong)pdata->loopback_rx_pkt;
 790                rdsz = pktlength + 3;
 791                rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3);
 792                rdsz >>= 2;
 793
 794                pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
 795
 796                if (pktlength != (MIN_PACKET_SIZE + 4)) {
 797                        SMSC_WARN(pdata, hw, "Unexpected packet size "
 798                                  "during loop back test, size=%d, will retry",
 799                                  pktlength);
 800                } else {
 801                        unsigned int j;
 802                        int mismatch = 0;
 803                        for (j = 0; j < MIN_PACKET_SIZE; j++) {
 804                                if (pdata->loopback_tx_pkt[j]
 805                                    != pdata->loopback_rx_pkt[j]) {
 806                                        mismatch = 1;
 807                                        break;
 808                                }
 809                        }
 810                        if (!mismatch) {
 811                                SMSC_TRACE(pdata, hw, "Successfully verified "
 812                                           "loopback packet");
 813                                return 0;
 814                        } else {
 815                                SMSC_WARN(pdata, hw, "Data mismatch "
 816                                          "during loop back test, will retry");
 817                        }
 818                }
 819        }
 820
 821        return -EIO;
 822}
 823
 824static int smsc911x_phy_reset(struct smsc911x_data *pdata)
 825{
 826        unsigned int temp;
 827        unsigned int i = 100000;
 828
 829        temp = smsc911x_reg_read(pdata, PMT_CTRL);
 830        smsc911x_reg_write(pdata, PMT_CTRL, temp | PMT_CTRL_PHY_RST_);
 831        do {
 832                msleep(1);
 833                temp = smsc911x_reg_read(pdata, PMT_CTRL);
 834        } while ((i--) && (temp & PMT_CTRL_PHY_RST_));
 835
 836        if (unlikely(temp & PMT_CTRL_PHY_RST_)) {
 837                SMSC_WARN(pdata, hw, "PHY reset failed to complete");
 838                return -EIO;
 839        }
 840        /* Extra delay required because the phy may not be completed with
 841        * its reset when BMCR_RESET is cleared. Specs say 256 uS is
 842        * enough delay but using 1ms here to be safe */
 843        msleep(1);
 844
 845        return 0;
 846}
 847
 848static int smsc911x_phy_loopbacktest(struct net_device *dev)
 849{
 850        struct smsc911x_data *pdata = netdev_priv(dev);
 851        struct phy_device *phy_dev = dev->phydev;
 852        int result = -EIO;
 853        unsigned int i, val;
 854        unsigned long flags;
 855
 856        /* Initialise tx packet using broadcast destination address */
 857        eth_broadcast_addr(pdata->loopback_tx_pkt);
 858
 859        /* Use incrementing source address */
 860        for (i = 6; i < 12; i++)
 861                pdata->loopback_tx_pkt[i] = (char)i;
 862
 863        /* Set length type field */
 864        pdata->loopback_tx_pkt[12] = 0x00;
 865        pdata->loopback_tx_pkt[13] = 0x00;
 866
 867        for (i = 14; i < MIN_PACKET_SIZE; i++)
 868                pdata->loopback_tx_pkt[i] = (char)i;
 869
 870        val = smsc911x_reg_read(pdata, HW_CFG);
 871        val &= HW_CFG_TX_FIF_SZ_;
 872        val |= HW_CFG_SF_;
 873        smsc911x_reg_write(pdata, HW_CFG, val);
 874
 875        smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_);
 876        smsc911x_reg_write(pdata, RX_CFG,
 877                (u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8);
 878
 879        for (i = 0; i < 10; i++) {
 880                /* Set PHY to 10/FD, no ANEG, and loopback mode */
 881                smsc911x_mii_write(phy_dev->mdio.bus, phy_dev->mdio.addr,
 882                                   MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX);
 883
 884                /* Enable MAC tx/rx, FD */
 885                spin_lock_irqsave(&pdata->mac_lock, flags);
 886                smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_
 887                                   | MAC_CR_TXEN_ | MAC_CR_RXEN_);
 888                spin_unlock_irqrestore(&pdata->mac_lock, flags);
 889
 890                if (smsc911x_phy_check_loopbackpkt(pdata) == 0) {
 891                        result = 0;
 892                        break;
 893                }
 894                pdata->resetcount++;
 895
 896                /* Disable MAC rx */
 897                spin_lock_irqsave(&pdata->mac_lock, flags);
 898                smsc911x_mac_write(pdata, MAC_CR, 0);
 899                spin_unlock_irqrestore(&pdata->mac_lock, flags);
 900
 901                smsc911x_phy_reset(pdata);
 902        }
 903
 904        /* Disable MAC */
 905        spin_lock_irqsave(&pdata->mac_lock, flags);
 906        smsc911x_mac_write(pdata, MAC_CR, 0);
 907        spin_unlock_irqrestore(&pdata->mac_lock, flags);
 908
 909        /* Cancel PHY loopback mode */
 910        smsc911x_mii_write(phy_dev->mdio.bus, phy_dev->mdio.addr, MII_BMCR, 0);
 911
 912        smsc911x_reg_write(pdata, TX_CFG, 0);
 913        smsc911x_reg_write(pdata, RX_CFG, 0);
 914
 915        return result;
 916}
 917#endif                          /* USE_PHY_WORK_AROUND */
 918
 919static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata)
 920{
 921        struct net_device *ndev = pdata->dev;
 922        struct phy_device *phy_dev = ndev->phydev;
 923        u32 afc = smsc911x_reg_read(pdata, AFC_CFG);
 924        u32 flow;
 925        unsigned long flags;
 926
 927        if (phy_dev->duplex == DUPLEX_FULL) {
 928                u16 lcladv = phy_read(phy_dev, MII_ADVERTISE);
 929                u16 rmtadv = phy_read(phy_dev, MII_LPA);
 930                u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
 931
 932                if (cap & FLOW_CTRL_RX)
 933                        flow = 0xFFFF0002;
 934                else
 935                        flow = 0;
 936
 937                if (cap & FLOW_CTRL_TX)
 938                        afc |= 0xF;
 939                else
 940                        afc &= ~0xF;
 941
 942                SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s",
 943                           (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
 944                           (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
 945        } else {
 946                SMSC_TRACE(pdata, hw, "half duplex");
 947                flow = 0;
 948                afc |= 0xF;
 949        }
 950
 951        spin_lock_irqsave(&pdata->mac_lock, flags);
 952        smsc911x_mac_write(pdata, FLOW, flow);
 953        spin_unlock_irqrestore(&pdata->mac_lock, flags);
 954
 955        smsc911x_reg_write(pdata, AFC_CFG, afc);
 956}
 957
 958/* Update link mode if anything has changed.  Called periodically when the
 959 * PHY is in polling mode, even if nothing has changed. */
 960static void smsc911x_phy_adjust_link(struct net_device *dev)
 961{
 962        struct smsc911x_data *pdata = netdev_priv(dev);
 963        struct phy_device *phy_dev = dev->phydev;
 964        unsigned long flags;
 965        int carrier;
 966
 967        if (phy_dev->duplex != pdata->last_duplex) {
 968                unsigned int mac_cr;
 969                SMSC_TRACE(pdata, hw, "duplex state has changed");
 970
 971                spin_lock_irqsave(&pdata->mac_lock, flags);
 972                mac_cr = smsc911x_mac_read(pdata, MAC_CR);
 973                if (phy_dev->duplex) {
 974                        SMSC_TRACE(pdata, hw,
 975                                   "configuring for full duplex mode");
 976                        mac_cr |= MAC_CR_FDPX_;
 977                } else {
 978                        SMSC_TRACE(pdata, hw,
 979                                   "configuring for half duplex mode");
 980                        mac_cr &= ~MAC_CR_FDPX_;
 981                }
 982                smsc911x_mac_write(pdata, MAC_CR, mac_cr);
 983                spin_unlock_irqrestore(&pdata->mac_lock, flags);
 984
 985                smsc911x_phy_update_flowcontrol(pdata);
 986                pdata->last_duplex = phy_dev->duplex;
 987        }
 988
 989        carrier = netif_carrier_ok(dev);
 990        if (carrier != pdata->last_carrier) {
 991                SMSC_TRACE(pdata, hw, "carrier state has changed");
 992                if (carrier) {
 993                        SMSC_TRACE(pdata, hw, "configuring for carrier OK");
 994                        if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) &&
 995                            (!pdata->using_extphy)) {
 996                                /* Restore original GPIO configuration */
 997                                pdata->gpio_setting = pdata->gpio_orig_setting;
 998                                smsc911x_reg_write(pdata, GPIO_CFG,
 999                                        pdata->gpio_setting);
1000                        }
1001                } else {
1002                        SMSC_TRACE(pdata, hw, "configuring for no carrier");
1003                        /* Check global setting that LED1
1004                         * usage is 10/100 indicator */
1005                        pdata->gpio_setting = smsc911x_reg_read(pdata,
1006                                GPIO_CFG);
1007                        if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) &&
1008                            (!pdata->using_extphy)) {
1009                                /* Force 10/100 LED off, after saving
1010                                 * original GPIO configuration */
1011                                pdata->gpio_orig_setting = pdata->gpio_setting;
1012
1013                                pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_;
1014                                pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_
1015                                                        | GPIO_CFG_GPIODIR0_
1016                                                        | GPIO_CFG_GPIOD0_);
1017                                smsc911x_reg_write(pdata, GPIO_CFG,
1018                                        pdata->gpio_setting);
1019                        }
1020                }
1021                pdata->last_carrier = carrier;
1022        }
1023}
1024
1025static int smsc911x_mii_probe(struct net_device *dev)
1026{
1027        struct smsc911x_data *pdata = netdev_priv(dev);
1028        struct phy_device *phydev = NULL;
1029        int ret;
1030
1031        /* find the first phy */
1032        phydev = phy_find_first(pdata->mii_bus);
1033        if (!phydev) {
1034                netdev_err(dev, "no PHY found\n");
1035                return -ENODEV;
1036        }
1037
1038        SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X",
1039                   phydev->mdio.addr, phydev->phy_id);
1040
1041        ret = phy_connect_direct(dev, phydev, &smsc911x_phy_adjust_link,
1042                                 pdata->config.phy_interface);
1043
1044        if (ret) {
1045                netdev_err(dev, "Could not attach to PHY\n");
1046                return ret;
1047        }
1048
1049        phy_attached_info(phydev);
1050
1051        phy_set_max_speed(phydev, SPEED_100);
1052
1053        /* mask with MAC supported features */
1054        phy_support_asym_pause(phydev);
1055
1056        pdata->last_duplex = -1;
1057        pdata->last_carrier = -1;
1058
1059#ifdef USE_PHY_WORK_AROUND
1060        if (smsc911x_phy_loopbacktest(dev) < 0) {
1061                SMSC_WARN(pdata, hw, "Failed Loop Back Test");
1062                phy_disconnect(phydev);
1063                return -ENODEV;
1064        }
1065        SMSC_TRACE(pdata, hw, "Passed Loop Back Test");
1066#endif                          /* USE_PHY_WORK_AROUND */
1067
1068        SMSC_TRACE(pdata, hw, "phy initialised successfully");
1069        return 0;
1070}
1071
1072static int smsc911x_mii_init(struct platform_device *pdev,
1073                             struct net_device *dev)
1074{
1075        struct smsc911x_data *pdata = netdev_priv(dev);
1076        int err = -ENXIO;
1077
1078        pdata->mii_bus = mdiobus_alloc();
1079        if (!pdata->mii_bus) {
1080                err = -ENOMEM;
1081                goto err_out_1;
1082        }
1083
1084        pdata->mii_bus->name = SMSC_MDIONAME;
1085        snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
1086                pdev->name, pdev->id);
1087        pdata->mii_bus->priv = pdata;
1088        pdata->mii_bus->read = smsc911x_mii_read;
1089        pdata->mii_bus->write = smsc911x_mii_write;
1090
1091        pdata->mii_bus->parent = &pdev->dev;
1092
1093        switch (pdata->idrev & 0xFFFF0000) {
1094        case 0x01170000:
1095        case 0x01150000:
1096        case 0x117A0000:
1097        case 0x115A0000:
1098                /* External PHY supported, try to autodetect */
1099                smsc911x_phy_initialise_external(pdata);
1100                break;
1101        default:
1102                SMSC_TRACE(pdata, hw, "External PHY is not supported, "
1103                           "using internal PHY");
1104                pdata->using_extphy = 0;
1105                break;
1106        }
1107
1108        if (!pdata->using_extphy) {
1109                /* Mask all PHYs except ID 1 (internal) */
1110                pdata->mii_bus->phy_mask = ~(1 << 1);
1111        }
1112
1113        if (mdiobus_register(pdata->mii_bus)) {
1114                SMSC_WARN(pdata, probe, "Error registering mii bus");
1115                goto err_out_free_bus_2;
1116        }
1117
1118        return 0;
1119
1120err_out_free_bus_2:
1121        mdiobus_free(pdata->mii_bus);
1122err_out_1:
1123        return err;
1124}
1125
1126/* Gets the number of tx statuses in the fifo */
1127static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata)
1128{
1129        return (smsc911x_reg_read(pdata, TX_FIFO_INF)
1130                & TX_FIFO_INF_TSUSED_) >> 16;
1131}
1132
1133/* Reads tx statuses and increments counters where necessary */
1134static void smsc911x_tx_update_txcounters(struct net_device *dev)
1135{
1136        struct smsc911x_data *pdata = netdev_priv(dev);
1137        unsigned int tx_stat;
1138
1139        while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) {
1140                if (unlikely(tx_stat & 0x80000000)) {
1141                        /* In this driver the packet tag is used as the packet
1142                         * length. Since a packet length can never reach the
1143                         * size of 0x8000, this bit is reserved. It is worth
1144                         * noting that the "reserved bit" in the warning above
1145                         * does not reference a hardware defined reserved bit
1146                         * but rather a driver defined one.
1147                         */
1148                        SMSC_WARN(pdata, hw, "Packet tag reserved bit is high");
1149                } else {
1150                        if (unlikely(tx_stat & TX_STS_ES_)) {
1151                                dev->stats.tx_errors++;
1152                        } else {
1153                                dev->stats.tx_packets++;
1154                                dev->stats.tx_bytes += (tx_stat >> 16);
1155                        }
1156                        if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) {
1157                                dev->stats.collisions += 16;
1158                                dev->stats.tx_aborted_errors += 1;
1159                        } else {
1160                                dev->stats.collisions +=
1161                                    ((tx_stat >> 3) & 0xF);
1162                        }
1163                        if (unlikely(tx_stat & TX_STS_LOST_CARRIER_))
1164                                dev->stats.tx_carrier_errors += 1;
1165                        if (unlikely(tx_stat & TX_STS_LATE_COL_)) {
1166                                dev->stats.collisions++;
1167                                dev->stats.tx_aborted_errors++;
1168                        }
1169                }
1170        }
1171}
1172
1173/* Increments the Rx error counters */
1174static void
1175smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat)
1176{
1177        int crc_err = 0;
1178
1179        if (unlikely(rxstat & RX_STS_ES_)) {
1180                dev->stats.rx_errors++;
1181                if (unlikely(rxstat & RX_STS_CRC_ERR_)) {
1182                        dev->stats.rx_crc_errors++;
1183                        crc_err = 1;
1184                }
1185        }
1186        if (likely(!crc_err)) {
1187                if (unlikely((rxstat & RX_STS_FRAME_TYPE_) &&
1188                             (rxstat & RX_STS_LENGTH_ERR_)))
1189                        dev->stats.rx_length_errors++;
1190                if (rxstat & RX_STS_MCAST_)
1191                        dev->stats.multicast++;
1192        }
1193}
1194
1195/* Quickly dumps bad packets */
1196static void
1197smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords)
1198{
1199        if (likely(pktwords >= 4)) {
1200                unsigned int timeout = 500;
1201                unsigned int val;
1202                smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_);
1203                do {
1204                        udelay(1);
1205                        val = smsc911x_reg_read(pdata, RX_DP_CTRL);
1206                } while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout);
1207
1208                if (unlikely(timeout == 0))
1209                        SMSC_WARN(pdata, hw, "Timed out waiting for "
1210                                  "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val);
1211        } else {
1212                unsigned int temp;
1213                while (pktwords--)
1214                        temp = smsc911x_reg_read(pdata, RX_DATA_FIFO);
1215        }
1216}
1217
1218/* NAPI poll function */
1219static int smsc911x_poll(struct napi_struct *napi, int budget)
1220{
1221        struct smsc911x_data *pdata =
1222                container_of(napi, struct smsc911x_data, napi);
1223        struct net_device *dev = pdata->dev;
1224        int npackets = 0;
1225
1226        while (npackets < budget) {
1227                unsigned int pktlength;
1228                unsigned int pktwords;
1229                struct sk_buff *skb;
1230                unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata);
1231
1232                if (!rxstat) {
1233                        unsigned int temp;
1234                        /* We processed all packets available.  Tell NAPI it can
1235                         * stop polling then re-enable rx interrupts */
1236                        smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_);
1237                        napi_complete(napi);
1238                        temp = smsc911x_reg_read(pdata, INT_EN);
1239                        temp |= INT_EN_RSFL_EN_;
1240                        smsc911x_reg_write(pdata, INT_EN, temp);
1241                        break;
1242                }
1243
1244                /* Count packet for NAPI scheduling, even if it has an error.
1245                 * Error packets still require cycles to discard */
1246                npackets++;
1247
1248                pktlength = ((rxstat & 0x3FFF0000) >> 16);
1249                pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2;
1250                smsc911x_rx_counterrors(dev, rxstat);
1251
1252                if (unlikely(rxstat & RX_STS_ES_)) {
1253                        SMSC_WARN(pdata, rx_err,
1254                                  "Discarding packet with error bit set");
1255                        /* Packet has an error, discard it and continue with
1256                         * the next */
1257                        smsc911x_rx_fastforward(pdata, pktwords);
1258                        dev->stats.rx_dropped++;
1259                        continue;
1260                }
1261
1262                skb = netdev_alloc_skb(dev, pktwords << 2);
1263                if (unlikely(!skb)) {
1264                        SMSC_WARN(pdata, rx_err,
1265                                  "Unable to allocate skb for rx packet");
1266                        /* Drop the packet and stop this polling iteration */
1267                        smsc911x_rx_fastforward(pdata, pktwords);
1268                        dev->stats.rx_dropped++;
1269                        break;
1270                }
1271
1272                pdata->ops->rx_readfifo(pdata,
1273                                 (unsigned int *)skb->data, pktwords);
1274
1275                /* Align IP on 16B boundary */
1276                skb_reserve(skb, NET_IP_ALIGN);
1277                skb_put(skb, pktlength - 4);
1278                skb->protocol = eth_type_trans(skb, dev);
1279                skb_checksum_none_assert(skb);
1280                netif_receive_skb(skb);
1281
1282                /* Update counters */
1283                dev->stats.rx_packets++;
1284                dev->stats.rx_bytes += (pktlength - 4);
1285        }
1286
1287        /* Return total received packets */
1288        return npackets;
1289}
1290
1291/* Returns hash bit number for given MAC address
1292 * Example:
1293 * 01 00 5E 00 00 01 -> returns bit number 31 */
1294static unsigned int smsc911x_hash(char addr[ETH_ALEN])
1295{
1296        return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
1297}
1298
1299static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata)
1300{
1301        /* Performs the multicast & mac_cr update.  This is called when
1302         * safe on the current hardware, and with the mac_lock held */
1303        unsigned int mac_cr;
1304
1305        SMSC_ASSERT_MAC_LOCK(pdata);
1306
1307        mac_cr = smsc911x_mac_read(pdata, MAC_CR);
1308        mac_cr |= pdata->set_bits_mask;
1309        mac_cr &= ~(pdata->clear_bits_mask);
1310        smsc911x_mac_write(pdata, MAC_CR, mac_cr);
1311        smsc911x_mac_write(pdata, HASHH, pdata->hashhi);
1312        smsc911x_mac_write(pdata, HASHL, pdata->hashlo);
1313        SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",
1314                   mac_cr, pdata->hashhi, pdata->hashlo);
1315}
1316
1317static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata)
1318{
1319        unsigned int mac_cr;
1320
1321        /* This function is only called for older LAN911x devices
1322         * (revA or revB), where MAC_CR, HASHH and HASHL should not
1323         * be modified during Rx - newer devices immediately update the
1324         * registers.
1325         *
1326         * This is called from interrupt context */
1327
1328        spin_lock(&pdata->mac_lock);
1329
1330        /* Check Rx has stopped */
1331        if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_)
1332                SMSC_WARN(pdata, drv, "Rx not stopped");
1333
1334        /* Perform the update - safe to do now Rx has stopped */
1335        smsc911x_rx_multicast_update(pdata);
1336
1337        /* Re-enable Rx */
1338        mac_cr = smsc911x_mac_read(pdata, MAC_CR);
1339        mac_cr |= MAC_CR_RXEN_;
1340        smsc911x_mac_write(pdata, MAC_CR, mac_cr);
1341
1342        pdata->multicast_update_pending = 0;
1343
1344        spin_unlock(&pdata->mac_lock);
1345}
1346
1347static int smsc911x_phy_general_power_up(struct smsc911x_data *pdata)
1348{
1349        struct net_device *ndev = pdata->dev;
1350        struct phy_device *phy_dev = ndev->phydev;
1351        int rc = 0;
1352
1353        if (!phy_dev)
1354                return rc;
1355
1356        /* If the internal PHY is in General Power-Down mode, all, except the
1357         * management interface, is powered-down and stays in that condition as
1358         * long as Phy register bit 0.11 is HIGH.
1359         *
1360         * In that case, clear the bit 0.11, so the PHY powers up and we can
1361         * access to the phy registers.
1362         */
1363        rc = phy_read(phy_dev, MII_BMCR);
1364        if (rc < 0) {
1365                SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1366                return rc;
1367        }
1368
1369        /* If the PHY general power-down bit is not set is not necessary to
1370         * disable the general power down-mode.
1371         */
1372        if (rc & BMCR_PDOWN) {
1373                rc = phy_write(phy_dev, MII_BMCR, rc & ~BMCR_PDOWN);
1374                if (rc < 0) {
1375                        SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1376                        return rc;
1377                }
1378
1379                usleep_range(1000, 1500);
1380        }
1381
1382        return 0;
1383}
1384
1385static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata)
1386{
1387        struct net_device *ndev = pdata->dev;
1388        struct phy_device *phy_dev = ndev->phydev;
1389        int rc = 0;
1390
1391        if (!phy_dev)
1392                return rc;
1393
1394        rc = phy_read(phy_dev, MII_LAN83C185_CTRL_STATUS);
1395
1396        if (rc < 0) {
1397                SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1398                return rc;
1399        }
1400
1401        /* Only disable if energy detect mode is already enabled */
1402        if (rc & MII_LAN83C185_EDPWRDOWN) {
1403                /* Disable energy detect mode for this SMSC Transceivers */
1404                rc = phy_write(phy_dev, MII_LAN83C185_CTRL_STATUS,
1405                               rc & (~MII_LAN83C185_EDPWRDOWN));
1406
1407                if (rc < 0) {
1408                        SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1409                        return rc;
1410                }
1411                /* Allow PHY to wakeup */
1412                mdelay(2);
1413        }
1414
1415        return 0;
1416}
1417
1418static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata)
1419{
1420        struct net_device *ndev = pdata->dev;
1421        struct phy_device *phy_dev = ndev->phydev;
1422        int rc = 0;
1423
1424        if (!phy_dev)
1425                return rc;
1426
1427        rc = phy_read(phy_dev, MII_LAN83C185_CTRL_STATUS);
1428
1429        if (rc < 0) {
1430                SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1431                return rc;
1432        }
1433
1434        /* Only enable if energy detect mode is already disabled */
1435        if (!(rc & MII_LAN83C185_EDPWRDOWN)) {
1436                /* Enable energy detect mode for this SMSC Transceivers */
1437                rc = phy_write(phy_dev, MII_LAN83C185_CTRL_STATUS,
1438                               rc | MII_LAN83C185_EDPWRDOWN);
1439
1440                if (rc < 0) {
1441                        SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1442                        return rc;
1443                }
1444        }
1445        return 0;
1446}
1447
1448static int smsc911x_soft_reset(struct smsc911x_data *pdata)
1449{
1450        unsigned int timeout;
1451        unsigned int temp;
1452        int ret;
1453        unsigned int reset_offset = HW_CFG;
1454        unsigned int reset_mask = HW_CFG_SRST_;
1455
1456        /*
1457         * Make sure to power-up the PHY chip before doing a reset, otherwise
1458         * the reset fails.
1459         */
1460        ret = smsc911x_phy_general_power_up(pdata);
1461        if (ret) {
1462                SMSC_WARN(pdata, drv, "Failed to power-up the PHY chip");
1463                return ret;
1464        }
1465
1466        /*
1467         * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that
1468         * are initialized in a Energy Detect Power-Down mode that prevents
1469         * the MAC chip to be software reseted. So we have to wakeup the PHY
1470         * before.
1471         */
1472        if (pdata->generation == 4) {
1473                ret = smsc911x_phy_disable_energy_detect(pdata);
1474
1475                if (ret) {
1476                        SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip");
1477                        return ret;
1478                }
1479        }
1480
1481        if ((pdata->idrev & 0xFFFF0000) == LAN9250) {
1482                /* special reset for  LAN9250 */
1483                reset_offset = RESET_CTL;
1484                reset_mask = RESET_CTL_DIGITAL_RST_;
1485        }
1486
1487        /* Reset the LAN911x */
1488        smsc911x_reg_write(pdata, reset_offset, reset_mask);
1489
1490        /* verify reset bit is cleared */
1491        timeout = 10;
1492        do {
1493                udelay(10);
1494                temp = smsc911x_reg_read(pdata, reset_offset);
1495        } while ((--timeout) && (temp & reset_mask));
1496
1497        if (unlikely(temp & reset_mask)) {
1498                SMSC_WARN(pdata, drv, "Failed to complete reset");
1499                return -EIO;
1500        }
1501
1502        if (pdata->generation == 4) {
1503                ret = smsc911x_phy_enable_energy_detect(pdata);
1504
1505                if (ret) {
1506                        SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip");
1507                        return ret;
1508                }
1509        }
1510
1511        return 0;
1512}
1513
1514/* Sets the device MAC address to dev_addr, called with mac_lock held */
1515static void
1516smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6])
1517{
1518        u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4];
1519        u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) |
1520            (dev_addr[1] << 8) | dev_addr[0];
1521
1522        SMSC_ASSERT_MAC_LOCK(pdata);
1523
1524        smsc911x_mac_write(pdata, ADDRH, mac_high16);
1525        smsc911x_mac_write(pdata, ADDRL, mac_low32);
1526}
1527
1528static void smsc911x_disable_irq_chip(struct net_device *dev)
1529{
1530        struct smsc911x_data *pdata = netdev_priv(dev);
1531
1532        smsc911x_reg_write(pdata, INT_EN, 0);
1533        smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
1534}
1535
1536static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id)
1537{
1538        struct net_device *dev = dev_id;
1539        struct smsc911x_data *pdata = netdev_priv(dev);
1540        u32 intsts = smsc911x_reg_read(pdata, INT_STS);
1541        u32 inten = smsc911x_reg_read(pdata, INT_EN);
1542        int serviced = IRQ_NONE;
1543        u32 temp;
1544
1545        if (unlikely(intsts & inten & INT_STS_SW_INT_)) {
1546                temp = smsc911x_reg_read(pdata, INT_EN);
1547                temp &= (~INT_EN_SW_INT_EN_);
1548                smsc911x_reg_write(pdata, INT_EN, temp);
1549                smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_);
1550                pdata->software_irq_signal = 1;
1551                smp_wmb();
1552                serviced = IRQ_HANDLED;
1553        }
1554
1555        if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) {
1556                /* Called when there is a multicast update scheduled and
1557                 * it is now safe to complete the update */
1558                SMSC_TRACE(pdata, intr, "RX Stop interrupt");
1559                smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_);
1560                if (pdata->multicast_update_pending)
1561                        smsc911x_rx_multicast_update_workaround(pdata);
1562                serviced = IRQ_HANDLED;
1563        }
1564
1565        if (intsts & inten & INT_STS_TDFA_) {
1566                temp = smsc911x_reg_read(pdata, FIFO_INT);
1567                temp |= FIFO_INT_TX_AVAIL_LEVEL_;
1568                smsc911x_reg_write(pdata, FIFO_INT, temp);
1569                smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_);
1570                netif_wake_queue(dev);
1571                serviced = IRQ_HANDLED;
1572        }
1573
1574        if (unlikely(intsts & inten & INT_STS_RXE_)) {
1575                SMSC_TRACE(pdata, intr, "RX Error interrupt");
1576                smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_);
1577                serviced = IRQ_HANDLED;
1578        }
1579
1580        if (likely(intsts & inten & INT_STS_RSFL_)) {
1581                if (likely(napi_schedule_prep(&pdata->napi))) {
1582                        /* Disable Rx interrupts */
1583                        temp = smsc911x_reg_read(pdata, INT_EN);
1584                        temp &= (~INT_EN_RSFL_EN_);
1585                        smsc911x_reg_write(pdata, INT_EN, temp);
1586                        /* Schedule a NAPI poll */
1587                        __napi_schedule(&pdata->napi);
1588                } else {
1589                        SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed");
1590                }
1591                serviced = IRQ_HANDLED;
1592        }
1593
1594        return serviced;
1595}
1596
1597static int smsc911x_open(struct net_device *dev)
1598{
1599        struct smsc911x_data *pdata = netdev_priv(dev);
1600        unsigned int timeout;
1601        unsigned int temp;
1602        unsigned int intcfg;
1603        int retval;
1604        int irq_flags;
1605
1606        /* find and start the given phy */
1607        if (!dev->phydev) {
1608                retval = smsc911x_mii_probe(dev);
1609                if (retval < 0) {
1610                        SMSC_WARN(pdata, probe, "Error starting phy");
1611                        goto out;
1612                }
1613        }
1614
1615        /* Reset the LAN911x */
1616        retval = smsc911x_soft_reset(pdata);
1617        if (retval) {
1618                SMSC_WARN(pdata, hw, "soft reset failed");
1619                goto mii_free_out;
1620        }
1621
1622        smsc911x_reg_write(pdata, HW_CFG, 0x00050000);
1623        smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740);
1624
1625        /* Increase the legal frame size of VLAN tagged frames to 1522 bytes */
1626        spin_lock_irq(&pdata->mac_lock);
1627        smsc911x_mac_write(pdata, VLAN1, ETH_P_8021Q);
1628        spin_unlock_irq(&pdata->mac_lock);
1629
1630        /* Make sure EEPROM has finished loading before setting GPIO_CFG */
1631        timeout = 50;
1632        while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) &&
1633               --timeout) {
1634                udelay(10);
1635        }
1636
1637        if (unlikely(timeout == 0))
1638                SMSC_WARN(pdata, ifup,
1639                          "Timed out waiting for EEPROM busy bit to clear");
1640
1641        smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
1642
1643        /* The soft reset above cleared the device's MAC address,
1644         * restore it from local copy (set in probe) */
1645        spin_lock_irq(&pdata->mac_lock);
1646        smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
1647        spin_unlock_irq(&pdata->mac_lock);
1648
1649        /* Initialise irqs, but leave all sources disabled */
1650        smsc911x_disable_irq_chip(dev);
1651
1652        /* Set interrupt deassertion to 100uS */
1653        intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
1654
1655        if (pdata->config.irq_polarity) {
1656                SMSC_TRACE(pdata, ifup, "irq polarity: active high");
1657                intcfg |= INT_CFG_IRQ_POL_;
1658        } else {
1659                SMSC_TRACE(pdata, ifup, "irq polarity: active low");
1660        }
1661
1662        if (pdata->config.irq_type) {
1663                SMSC_TRACE(pdata, ifup, "irq type: push-pull");
1664                intcfg |= INT_CFG_IRQ_TYPE_;
1665        } else {
1666                SMSC_TRACE(pdata, ifup, "irq type: open drain");
1667        }
1668
1669        smsc911x_reg_write(pdata, INT_CFG, intcfg);
1670
1671        SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq);
1672        pdata->software_irq_signal = 0;
1673        smp_wmb();
1674
1675        irq_flags = irq_get_trigger_type(dev->irq);
1676        retval = request_irq(dev->irq, smsc911x_irqhandler,
1677                             irq_flags | IRQF_SHARED, dev->name, dev);
1678        if (retval) {
1679                SMSC_WARN(pdata, probe,
1680                          "Unable to claim requested irq: %d", dev->irq);
1681                goto mii_free_out;
1682        }
1683
1684        temp = smsc911x_reg_read(pdata, INT_EN);
1685        temp |= INT_EN_SW_INT_EN_;
1686        smsc911x_reg_write(pdata, INT_EN, temp);
1687
1688        timeout = 1000;
1689        while (timeout--) {
1690                if (pdata->software_irq_signal)
1691                        break;
1692                msleep(1);
1693        }
1694
1695        if (!pdata->software_irq_signal) {
1696                netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n",
1697                            dev->irq);
1698                retval = -ENODEV;
1699                goto irq_stop_out;
1700        }
1701        SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d",
1702                   dev->irq);
1703
1704        netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
1705                    (unsigned long)pdata->ioaddr, dev->irq);
1706
1707        /* Reset the last known duplex and carrier */
1708        pdata->last_duplex = -1;
1709        pdata->last_carrier = -1;
1710
1711        /* Bring the PHY up */
1712        phy_start(dev->phydev);
1713
1714        temp = smsc911x_reg_read(pdata, HW_CFG);
1715        /* Preserve TX FIFO size and external PHY configuration */
1716        temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF);
1717        temp |= HW_CFG_SF_;
1718        smsc911x_reg_write(pdata, HW_CFG, temp);
1719
1720        temp = smsc911x_reg_read(pdata, FIFO_INT);
1721        temp |= FIFO_INT_TX_AVAIL_LEVEL_;
1722        temp &= ~(FIFO_INT_RX_STS_LEVEL_);
1723        smsc911x_reg_write(pdata, FIFO_INT, temp);
1724
1725        /* set RX Data offset to 2 bytes for alignment */
1726        smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8));
1727
1728        /* enable NAPI polling before enabling RX interrupts */
1729        napi_enable(&pdata->napi);
1730
1731        temp = smsc911x_reg_read(pdata, INT_EN);
1732        temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_);
1733        smsc911x_reg_write(pdata, INT_EN, temp);
1734
1735        spin_lock_irq(&pdata->mac_lock);
1736        temp = smsc911x_mac_read(pdata, MAC_CR);
1737        temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_);
1738        smsc911x_mac_write(pdata, MAC_CR, temp);
1739        spin_unlock_irq(&pdata->mac_lock);
1740
1741        smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_);
1742
1743        netif_start_queue(dev);
1744        return 0;
1745
1746irq_stop_out:
1747        free_irq(dev->irq, dev);
1748mii_free_out:
1749        phy_disconnect(dev->phydev);
1750        dev->phydev = NULL;
1751out:
1752        return retval;
1753}
1754
1755/* Entry point for stopping the interface */
1756static int smsc911x_stop(struct net_device *dev)
1757{
1758        struct smsc911x_data *pdata = netdev_priv(dev);
1759        unsigned int temp;
1760
1761        /* Disable all device interrupts */
1762        temp = smsc911x_reg_read(pdata, INT_CFG);
1763        temp &= ~INT_CFG_IRQ_EN_;
1764        smsc911x_reg_write(pdata, INT_CFG, temp);
1765
1766        /* Stop Tx and Rx polling */
1767        netif_stop_queue(dev);
1768        napi_disable(&pdata->napi);
1769
1770        /* At this point all Rx and Tx activity is stopped */
1771        dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP);
1772        smsc911x_tx_update_txcounters(dev);
1773
1774        free_irq(dev->irq, dev);
1775
1776        /* Bring the PHY down */
1777        if (dev->phydev) {
1778                phy_stop(dev->phydev);
1779                phy_disconnect(dev->phydev);
1780                dev->phydev = NULL;
1781        }
1782        netif_carrier_off(dev);
1783
1784        SMSC_TRACE(pdata, ifdown, "Interface stopped");
1785        return 0;
1786}
1787
1788/* Entry point for transmitting a packet */
1789static netdev_tx_t
1790smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
1791{
1792        struct smsc911x_data *pdata = netdev_priv(dev);
1793        unsigned int freespace;
1794        unsigned int tx_cmd_a;
1795        unsigned int tx_cmd_b;
1796        unsigned int temp;
1797        u32 wrsz;
1798        ulong bufp;
1799
1800        freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_;
1801
1802        if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD))
1803                SMSC_WARN(pdata, tx_err,
1804                          "Tx data fifo low, space available: %d", freespace);
1805
1806        /* Word alignment adjustment */
1807        tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16;
1808        tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
1809        tx_cmd_a |= (unsigned int)skb->len;
1810
1811        tx_cmd_b = ((unsigned int)skb->len) << 16;
1812        tx_cmd_b |= (unsigned int)skb->len;
1813
1814        smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a);
1815        smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b);
1816
1817        bufp = (ulong)skb->data & (~0x3);
1818        wrsz = (u32)skb->len + 3;
1819        wrsz += (u32)((ulong)skb->data & 0x3);
1820        wrsz >>= 2;
1821
1822        pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
1823        freespace -= (skb->len + 32);
1824        skb_tx_timestamp(skb);
1825        dev_consume_skb_any(skb);
1826
1827        if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30))
1828                smsc911x_tx_update_txcounters(dev);
1829
1830        if (freespace < TX_FIFO_LOW_THRESHOLD) {
1831                netif_stop_queue(dev);
1832                temp = smsc911x_reg_read(pdata, FIFO_INT);
1833                temp &= 0x00FFFFFF;
1834                temp |= 0x32000000;
1835                smsc911x_reg_write(pdata, FIFO_INT, temp);
1836        }
1837
1838        return NETDEV_TX_OK;
1839}
1840
1841/* Entry point for getting status counters */
1842static struct net_device_stats *smsc911x_get_stats(struct net_device *dev)
1843{
1844        struct smsc911x_data *pdata = netdev_priv(dev);
1845        smsc911x_tx_update_txcounters(dev);
1846        dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP);
1847        return &dev->stats;
1848}
1849
1850/* Entry point for setting addressing modes */
1851static void smsc911x_set_multicast_list(struct net_device *dev)
1852{
1853        struct smsc911x_data *pdata = netdev_priv(dev);
1854        unsigned long flags;
1855
1856        if (dev->flags & IFF_PROMISC) {
1857                /* Enabling promiscuous mode */
1858                pdata->set_bits_mask = MAC_CR_PRMS_;
1859                pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
1860                pdata->hashhi = 0;
1861                pdata->hashlo = 0;
1862        } else if (dev->flags & IFF_ALLMULTI) {
1863                /* Enabling all multicast mode */
1864                pdata->set_bits_mask = MAC_CR_MCPAS_;
1865                pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_);
1866                pdata->hashhi = 0;
1867                pdata->hashlo = 0;
1868        } else if (!netdev_mc_empty(dev)) {
1869                /* Enabling specific multicast addresses */
1870                unsigned int hash_high = 0;
1871                unsigned int hash_low = 0;
1872                struct netdev_hw_addr *ha;
1873
1874                pdata->set_bits_mask = MAC_CR_HPFILT_;
1875                pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_);
1876
1877                netdev_for_each_mc_addr(ha, dev) {
1878                        unsigned int bitnum = smsc911x_hash(ha->addr);
1879                        unsigned int mask = 0x01 << (bitnum & 0x1F);
1880
1881                        if (bitnum & 0x20)
1882                                hash_high |= mask;
1883                        else
1884                                hash_low |= mask;
1885                }
1886
1887                pdata->hashhi = hash_high;
1888                pdata->hashlo = hash_low;
1889        } else {
1890                /* Enabling local MAC address only */
1891                pdata->set_bits_mask = 0;
1892                pdata->clear_bits_mask =
1893                    (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
1894                pdata->hashhi = 0;
1895                pdata->hashlo = 0;
1896        }
1897
1898        spin_lock_irqsave(&pdata->mac_lock, flags);
1899
1900        if (pdata->generation <= 1) {
1901                /* Older hardware revision - cannot change these flags while
1902                 * receiving data */
1903                if (!pdata->multicast_update_pending) {
1904                        unsigned int temp;
1905                        SMSC_TRACE(pdata, hw, "scheduling mcast update");
1906                        pdata->multicast_update_pending = 1;
1907
1908                        /* Request the hardware to stop, then perform the
1909                         * update when we get an RX_STOP interrupt */
1910                        temp = smsc911x_mac_read(pdata, MAC_CR);
1911                        temp &= ~(MAC_CR_RXEN_);
1912                        smsc911x_mac_write(pdata, MAC_CR, temp);
1913                } else {
1914                        /* There is another update pending, this should now
1915                         * use the newer values */
1916                }
1917        } else {
1918                /* Newer hardware revision - can write immediately */
1919                smsc911x_rx_multicast_update(pdata);
1920        }
1921
1922        spin_unlock_irqrestore(&pdata->mac_lock, flags);
1923}
1924
1925#ifdef CONFIG_NET_POLL_CONTROLLER
1926static void smsc911x_poll_controller(struct net_device *dev)
1927{
1928        disable_irq(dev->irq);
1929        smsc911x_irqhandler(0, dev);
1930        enable_irq(dev->irq);
1931}
1932#endif                          /* CONFIG_NET_POLL_CONTROLLER */
1933
1934static int smsc911x_set_mac_address(struct net_device *dev, void *p)
1935{
1936        struct smsc911x_data *pdata = netdev_priv(dev);
1937        struct sockaddr *addr = p;
1938
1939        /* On older hardware revisions we cannot change the mac address
1940         * registers while receiving data.  Newer devices can safely change
1941         * this at any time. */
1942        if (pdata->generation <= 1 && netif_running(dev))
1943                return -EBUSY;
1944
1945        if (!is_valid_ether_addr(addr->sa_data))
1946                return -EADDRNOTAVAIL;
1947
1948        memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
1949
1950        spin_lock_irq(&pdata->mac_lock);
1951        smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
1952        spin_unlock_irq(&pdata->mac_lock);
1953
1954        netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
1955
1956        return 0;
1957}
1958
1959/* Standard ioctls for mii-tool */
1960static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1961{
1962        if (!netif_running(dev) || !dev->phydev)
1963                return -EINVAL;
1964
1965        return phy_mii_ioctl(dev->phydev, ifr, cmd);
1966}
1967
1968static void smsc911x_ethtool_getdrvinfo(struct net_device *dev,
1969                                        struct ethtool_drvinfo *info)
1970{
1971        strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver));
1972        strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version));
1973        strlcpy(info->bus_info, dev_name(dev->dev.parent),
1974                sizeof(info->bus_info));
1975}
1976
1977static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev)
1978{
1979        struct smsc911x_data *pdata = netdev_priv(dev);
1980        return pdata->msg_enable;
1981}
1982
1983static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level)
1984{
1985        struct smsc911x_data *pdata = netdev_priv(dev);
1986        pdata->msg_enable = level;
1987}
1988
1989static int smsc911x_ethtool_getregslen(struct net_device *dev)
1990{
1991        return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) *
1992            sizeof(u32);
1993}
1994
1995static void
1996smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs,
1997                         void *buf)
1998{
1999        struct smsc911x_data *pdata = netdev_priv(dev);
2000        struct phy_device *phy_dev = dev->phydev;
2001        unsigned long flags;
2002        unsigned int i;
2003        unsigned int j = 0;
2004        u32 *data = buf;
2005
2006        regs->version = pdata->idrev;
2007        for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32)))
2008                data[j++] = smsc911x_reg_read(pdata, i);
2009
2010        for (i = MAC_CR; i <= WUCSR; i++) {
2011                spin_lock_irqsave(&pdata->mac_lock, flags);
2012                data[j++] = smsc911x_mac_read(pdata, i);
2013                spin_unlock_irqrestore(&pdata->mac_lock, flags);
2014        }
2015
2016        for (i = 0; i <= 31; i++)
2017                data[j++] = smsc911x_mii_read(phy_dev->mdio.bus,
2018                                              phy_dev->mdio.addr, i);
2019}
2020
2021static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata)
2022{
2023        unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG);
2024        temp &= ~GPIO_CFG_EEPR_EN_;
2025        smsc911x_reg_write(pdata, GPIO_CFG, temp);
2026        msleep(1);
2027}
2028
2029static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op)
2030{
2031        int timeout = 100;
2032        u32 e2cmd;
2033
2034        SMSC_TRACE(pdata, drv, "op 0x%08x", op);
2035        if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
2036                SMSC_WARN(pdata, drv, "Busy at start");
2037                return -EBUSY;
2038        }
2039
2040        e2cmd = op | E2P_CMD_EPC_BUSY_;
2041        smsc911x_reg_write(pdata, E2P_CMD, e2cmd);
2042
2043        do {
2044                msleep(1);
2045                e2cmd = smsc911x_reg_read(pdata, E2P_CMD);
2046        } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
2047
2048        if (!timeout) {
2049                SMSC_TRACE(pdata, drv, "TIMED OUT");
2050                return -EAGAIN;
2051        }
2052
2053        if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
2054                SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation");
2055                return -EINVAL;
2056        }
2057
2058        return 0;
2059}
2060
2061static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata,
2062                                         u8 address, u8 *data)
2063{
2064        u32 op = E2P_CMD_EPC_CMD_READ_ | address;
2065        int ret;
2066
2067        SMSC_TRACE(pdata, drv, "address 0x%x", address);
2068        ret = smsc911x_eeprom_send_cmd(pdata, op);
2069
2070        if (!ret)
2071                data[address] = smsc911x_reg_read(pdata, E2P_DATA);
2072
2073        return ret;
2074}
2075
2076static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata,
2077                                          u8 address, u8 data)
2078{
2079        u32 op = E2P_CMD_EPC_CMD_ERASE_ | address;
2080        u32 temp;
2081        int ret;
2082
2083        SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data);
2084        ret = smsc911x_eeprom_send_cmd(pdata, op);
2085
2086        if (!ret) {
2087                op = E2P_CMD_EPC_CMD_WRITE_ | address;
2088                smsc911x_reg_write(pdata, E2P_DATA, (u32)data);
2089
2090                /* Workaround for hardware read-after-write restriction */
2091                temp = smsc911x_reg_read(pdata, BYTE_TEST);
2092
2093                ret = smsc911x_eeprom_send_cmd(pdata, op);
2094        }
2095
2096        return ret;
2097}
2098
2099static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev)
2100{
2101        return SMSC911X_EEPROM_SIZE;
2102}
2103
2104static int smsc911x_ethtool_get_eeprom(struct net_device *dev,
2105                                       struct ethtool_eeprom *eeprom, u8 *data)
2106{
2107        struct smsc911x_data *pdata = netdev_priv(dev);
2108        u8 eeprom_data[SMSC911X_EEPROM_SIZE];
2109        int len;
2110        int i;
2111
2112        smsc911x_eeprom_enable_access(pdata);
2113
2114        len = min(eeprom->len, SMSC911X_EEPROM_SIZE);
2115        for (i = 0; i < len; i++) {
2116                int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data);
2117                if (ret < 0) {
2118                        eeprom->len = 0;
2119                        return ret;
2120                }
2121        }
2122
2123        memcpy(data, &eeprom_data[eeprom->offset], len);
2124        eeprom->len = len;
2125        return 0;
2126}
2127
2128static int smsc911x_ethtool_set_eeprom(struct net_device *dev,
2129                                       struct ethtool_eeprom *eeprom, u8 *data)
2130{
2131        int ret;
2132        struct smsc911x_data *pdata = netdev_priv(dev);
2133
2134        smsc911x_eeprom_enable_access(pdata);
2135        smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_);
2136        ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data);
2137        smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_);
2138
2139        /* Single byte write, according to man page */
2140        eeprom->len = 1;
2141
2142        return ret;
2143}
2144
2145static const struct ethtool_ops smsc911x_ethtool_ops = {
2146        .get_link = ethtool_op_get_link,
2147        .get_drvinfo = smsc911x_ethtool_getdrvinfo,
2148        .nway_reset = phy_ethtool_nway_reset,
2149        .get_msglevel = smsc911x_ethtool_getmsglevel,
2150        .set_msglevel = smsc911x_ethtool_setmsglevel,
2151        .get_regs_len = smsc911x_ethtool_getregslen,
2152        .get_regs = smsc911x_ethtool_getregs,
2153        .get_eeprom_len = smsc911x_ethtool_get_eeprom_len,
2154        .get_eeprom = smsc911x_ethtool_get_eeprom,
2155        .set_eeprom = smsc911x_ethtool_set_eeprom,
2156        .get_ts_info = ethtool_op_get_ts_info,
2157        .get_link_ksettings = phy_ethtool_get_link_ksettings,
2158        .set_link_ksettings = phy_ethtool_set_link_ksettings,
2159};
2160
2161static const struct net_device_ops smsc911x_netdev_ops = {
2162        .ndo_open               = smsc911x_open,
2163        .ndo_stop               = smsc911x_stop,
2164        .ndo_start_xmit         = smsc911x_hard_start_xmit,
2165        .ndo_get_stats          = smsc911x_get_stats,
2166        .ndo_set_rx_mode        = smsc911x_set_multicast_list,
2167        .ndo_do_ioctl           = smsc911x_do_ioctl,
2168        .ndo_validate_addr      = eth_validate_addr,
2169        .ndo_set_mac_address    = smsc911x_set_mac_address,
2170#ifdef CONFIG_NET_POLL_CONTROLLER
2171        .ndo_poll_controller    = smsc911x_poll_controller,
2172#endif
2173};
2174
2175/* copies the current mac address from hardware to dev->dev_addr */
2176static void smsc911x_read_mac_address(struct net_device *dev)
2177{
2178        struct smsc911x_data *pdata = netdev_priv(dev);
2179        u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH);
2180        u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL);
2181
2182        dev->dev_addr[0] = (u8)(mac_low32);
2183        dev->dev_addr[1] = (u8)(mac_low32 >> 8);
2184        dev->dev_addr[2] = (u8)(mac_low32 >> 16);
2185        dev->dev_addr[3] = (u8)(mac_low32 >> 24);
2186        dev->dev_addr[4] = (u8)(mac_high16);
2187        dev->dev_addr[5] = (u8)(mac_high16 >> 8);
2188}
2189
2190/* Initializing private device structures, only called from probe */
2191static int smsc911x_init(struct net_device *dev)
2192{
2193        struct smsc911x_data *pdata = netdev_priv(dev);
2194        unsigned int byte_test, mask;
2195        unsigned int to = 100;
2196
2197        SMSC_TRACE(pdata, probe, "Driver Parameters:");
2198        SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
2199                   (unsigned long)pdata->ioaddr);
2200        SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq);
2201        SMSC_TRACE(pdata, probe, "PHY will be autodetected.");
2202
2203        spin_lock_init(&pdata->dev_lock);
2204        spin_lock_init(&pdata->mac_lock);
2205
2206        if (pdata->ioaddr == NULL) {
2207                SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000");
2208                return -ENODEV;
2209        }
2210
2211        /*
2212         * poll the READY bit in PMT_CTRL. Any other access to the device is
2213         * forbidden while this bit isn't set. Try for 100ms
2214         *
2215         * Note that this test is done before the WORD_SWAP register is
2216         * programmed. So in some configurations the READY bit is at 16 before
2217         * WORD_SWAP is written to. This issue is worked around by waiting
2218         * until either bit 0 or bit 16 gets set in PMT_CTRL.
2219         *
2220         * SMSC has confirmed that checking bit 16 (marked as reserved in
2221         * the datasheet) is fine since these bits "will either never be set
2222         * or can only go high after READY does (so also indicate the device
2223         * is ready)".
2224         */
2225
2226        mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_);
2227        while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to)
2228                udelay(1000);
2229
2230        if (to == 0) {
2231                netdev_err(dev, "Device not READY in 100ms aborting\n");
2232                return -ENODEV;
2233        }
2234
2235        /* Check byte ordering */
2236        byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2237        SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
2238        if (byte_test == 0x43218765) {
2239                SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, "
2240                           "applying WORD_SWAP");
2241                smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff);
2242
2243                /* 1 dummy read of BYTE_TEST is needed after a write to
2244                 * WORD_SWAP before its contents are valid */
2245                byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2246
2247                byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2248        }
2249
2250        if (byte_test != 0x87654321) {
2251                SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test);
2252                if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) {
2253                        SMSC_WARN(pdata, probe,
2254                                  "top 16 bits equal to bottom 16 bits");
2255                        SMSC_TRACE(pdata, probe,
2256                                   "This may mean the chip is set "
2257                                   "for 32 bit while the bus is reading 16 bit");
2258                }
2259                return -ENODEV;
2260        }
2261
2262        /* Default generation to zero (all workarounds apply) */
2263        pdata->generation = 0;
2264
2265        pdata->idrev = smsc911x_reg_read(pdata, ID_REV);
2266        switch (pdata->idrev & 0xFFFF0000) {
2267        case LAN9118:
2268        case LAN9117:
2269        case LAN9116:
2270        case LAN9115:
2271        case LAN89218:
2272                /* LAN911[5678] family */
2273                pdata->generation = pdata->idrev & 0x0000FFFF;
2274                break;
2275
2276        case LAN9218:
2277        case LAN9217:
2278        case LAN9216:
2279        case LAN9215:
2280                /* LAN921[5678] family */
2281                pdata->generation = 3;
2282                break;
2283
2284        case LAN9210:
2285        case LAN9211:
2286        case LAN9220:
2287        case LAN9221:
2288        case LAN9250:
2289                /* LAN9210/LAN9211/LAN9220/LAN9221/LAN9250 */
2290                pdata->generation = 4;
2291                break;
2292
2293        default:
2294                SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X",
2295                          pdata->idrev);
2296                return -ENODEV;
2297        }
2298
2299        SMSC_TRACE(pdata, probe,
2300                   "LAN911x identified, idrev: 0x%08X, generation: %d",
2301                   pdata->idrev, pdata->generation);
2302
2303        if (pdata->generation == 0)
2304                SMSC_WARN(pdata, probe,
2305                          "This driver is not intended for this chip revision");
2306
2307        /* workaround for platforms without an eeprom, where the mac address
2308         * is stored elsewhere and set by the bootloader.  This saves the
2309         * mac address before resetting the device */
2310        if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) {
2311                spin_lock_irq(&pdata->mac_lock);
2312                smsc911x_read_mac_address(dev);
2313                spin_unlock_irq(&pdata->mac_lock);
2314        }
2315
2316        /* Reset the LAN911x */
2317        if (smsc911x_phy_reset(pdata) || smsc911x_soft_reset(pdata))
2318                return -ENODEV;
2319
2320        dev->flags |= IFF_MULTICAST;
2321        netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT);
2322        dev->netdev_ops = &smsc911x_netdev_ops;
2323        dev->ethtool_ops = &smsc911x_ethtool_ops;
2324
2325        return 0;
2326}
2327
2328static int smsc911x_drv_remove(struct platform_device *pdev)
2329{
2330        struct net_device *dev;
2331        struct smsc911x_data *pdata;
2332        struct resource *res;
2333
2334        dev = platform_get_drvdata(pdev);
2335        BUG_ON(!dev);
2336        pdata = netdev_priv(dev);
2337        BUG_ON(!pdata);
2338        BUG_ON(!pdata->ioaddr);
2339
2340        SMSC_TRACE(pdata, ifdown, "Stopping driver");
2341
2342        unregister_netdev(dev);
2343
2344        mdiobus_unregister(pdata->mii_bus);
2345        mdiobus_free(pdata->mii_bus);
2346
2347        res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
2348                                           "smsc911x-memory");
2349        if (!res)
2350                res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2351
2352        release_mem_region(res->start, resource_size(res));
2353
2354        iounmap(pdata->ioaddr);
2355
2356        (void)smsc911x_disable_resources(pdev);
2357        smsc911x_free_resources(pdev);
2358
2359        free_netdev(dev);
2360
2361        pm_runtime_put(&pdev->dev);
2362        pm_runtime_disable(&pdev->dev);
2363
2364        return 0;
2365}
2366
2367/* standard register acces */
2368static const struct smsc911x_ops standard_smsc911x_ops = {
2369        .reg_read = __smsc911x_reg_read,
2370        .reg_write = __smsc911x_reg_write,
2371        .rx_readfifo = smsc911x_rx_readfifo,
2372        .tx_writefifo = smsc911x_tx_writefifo,
2373};
2374
2375/* shifted register access */
2376static const struct smsc911x_ops shifted_smsc911x_ops = {
2377        .reg_read = __smsc911x_reg_read_shift,
2378        .reg_write = __smsc911x_reg_write_shift,
2379        .rx_readfifo = smsc911x_rx_readfifo_shift,
2380        .tx_writefifo = smsc911x_tx_writefifo_shift,
2381};
2382
2383static int smsc911x_probe_config(struct smsc911x_platform_config *config,
2384                                 struct device *dev)
2385{
2386        int phy_interface;
2387        u32 width = 0;
2388        int err;
2389
2390        phy_interface = device_get_phy_mode(dev);
2391        if (phy_interface < 0)
2392                phy_interface = PHY_INTERFACE_MODE_NA;
2393        config->phy_interface = phy_interface;
2394
2395        device_get_mac_address(dev, config->mac, ETH_ALEN);
2396
2397        err = device_property_read_u32(dev, "reg-io-width", &width);
2398        if (err == -ENXIO)
2399                return err;
2400        if (!err && width == 4)
2401                config->flags |= SMSC911X_USE_32BIT;
2402        else
2403                config->flags |= SMSC911X_USE_16BIT;
2404
2405        device_property_read_u32(dev, "reg-shift", &config->shift);
2406
2407        if (device_property_present(dev, "smsc,irq-active-high"))
2408                config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
2409
2410        if (device_property_present(dev, "smsc,irq-push-pull"))
2411                config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
2412
2413        if (device_property_present(dev, "smsc,force-internal-phy"))
2414                config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
2415
2416        if (device_property_present(dev, "smsc,force-external-phy"))
2417                config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
2418
2419        if (device_property_present(dev, "smsc,save-mac-address"))
2420                config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
2421
2422        return 0;
2423}
2424
2425static int smsc911x_drv_probe(struct platform_device *pdev)
2426{
2427        struct net_device *dev;
2428        struct smsc911x_data *pdata;
2429        struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev);
2430        struct resource *res;
2431        int res_size, irq;
2432        int retval;
2433
2434        res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
2435                                           "smsc911x-memory");
2436        if (!res)
2437                res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2438        if (!res) {
2439                pr_warn("Could not allocate resource\n");
2440                retval = -ENODEV;
2441                goto out_0;
2442        }
2443        res_size = resource_size(res);
2444
2445        irq = platform_get_irq(pdev, 0);
2446        if (irq == -EPROBE_DEFER) {
2447                retval = -EPROBE_DEFER;
2448                goto out_0;
2449        } else if (irq <= 0) {
2450                pr_warn("Could not allocate irq resource\n");
2451                retval = -ENODEV;
2452                goto out_0;
2453        }
2454
2455        if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) {
2456                retval = -EBUSY;
2457                goto out_0;
2458        }
2459
2460        dev = alloc_etherdev(sizeof(struct smsc911x_data));
2461        if (!dev) {
2462                retval = -ENOMEM;
2463                goto out_release_io_1;
2464        }
2465
2466        SET_NETDEV_DEV(dev, &pdev->dev);
2467
2468        pdata = netdev_priv(dev);
2469        dev->irq = irq;
2470        pdata->ioaddr = ioremap_nocache(res->start, res_size);
2471        if (!pdata->ioaddr) {
2472                retval = -ENOMEM;
2473                goto out_ioremap_fail;
2474        }
2475
2476        pdata->dev = dev;
2477        pdata->msg_enable = ((1 << debug) - 1);
2478
2479        platform_set_drvdata(pdev, dev);
2480
2481        retval = smsc911x_request_resources(pdev);
2482        if (retval)
2483                goto out_request_resources_fail;
2484
2485        retval = smsc911x_enable_resources(pdev);
2486        if (retval)
2487                goto out_enable_resources_fail;
2488
2489        if (pdata->ioaddr == NULL) {
2490                SMSC_WARN(pdata, probe, "Error smsc911x base address invalid");
2491                retval = -ENOMEM;
2492                goto out_disable_resources;
2493        }
2494
2495        retval = smsc911x_probe_config(&pdata->config, &pdev->dev);
2496        if (retval && config) {
2497                /* copy config parameters across to pdata */
2498                memcpy(&pdata->config, config, sizeof(pdata->config));
2499                retval = 0;
2500        }
2501
2502        if (retval) {
2503                SMSC_WARN(pdata, probe, "Error smsc911x config not found");
2504                goto out_disable_resources;
2505        }
2506
2507        /* assume standard, non-shifted, access to HW registers */
2508        pdata->ops = &standard_smsc911x_ops;
2509        /* apply the right access if shifting is needed */
2510        if (pdata->config.shift)
2511                pdata->ops = &shifted_smsc911x_ops;
2512
2513        pm_runtime_enable(&pdev->dev);
2514        pm_runtime_get_sync(&pdev->dev);
2515
2516        retval = smsc911x_init(dev);
2517        if (retval < 0)
2518                goto out_disable_resources;
2519
2520        netif_carrier_off(dev);
2521
2522        retval = smsc911x_mii_init(pdev, dev);
2523        if (retval) {
2524                SMSC_WARN(pdata, probe, "Error %i initialising mii", retval);
2525                goto out_disable_resources;
2526        }
2527
2528        retval = register_netdev(dev);
2529        if (retval) {
2530                SMSC_WARN(pdata, probe, "Error %i registering device", retval);
2531                goto out_disable_resources;
2532        } else {
2533                SMSC_TRACE(pdata, probe,
2534                           "Network interface: \"%s\"", dev->name);
2535        }
2536
2537        spin_lock_irq(&pdata->mac_lock);
2538
2539        /* Check if mac address has been specified when bringing interface up */
2540        if (is_valid_ether_addr(dev->dev_addr)) {
2541                smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
2542                SMSC_TRACE(pdata, probe,
2543                           "MAC Address is specified by configuration");
2544        } else if (is_valid_ether_addr(pdata->config.mac)) {
2545                memcpy(dev->dev_addr, pdata->config.mac, ETH_ALEN);
2546                SMSC_TRACE(pdata, probe,
2547                           "MAC Address specified by platform data");
2548        } else {
2549                /* Try reading mac address from device. if EEPROM is present
2550                 * it will already have been set */
2551                smsc_get_mac(dev);
2552
2553                if (is_valid_ether_addr(dev->dev_addr)) {
2554                        /* eeprom values are valid  so use them */
2555                        SMSC_TRACE(pdata, probe,
2556                                   "Mac Address is read from LAN911x EEPROM");
2557                } else {
2558                        /* eeprom values are invalid, generate random MAC */
2559                        eth_hw_addr_random(dev);
2560                        smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
2561                        SMSC_TRACE(pdata, probe,
2562                                   "MAC Address is set to eth_random_addr");
2563                }
2564        }
2565
2566        spin_unlock_irq(&pdata->mac_lock);
2567
2568        netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
2569
2570        return 0;
2571
2572out_disable_resources:
2573        pm_runtime_put(&pdev->dev);
2574        pm_runtime_disable(&pdev->dev);
2575        (void)smsc911x_disable_resources(pdev);
2576out_enable_resources_fail:
2577        smsc911x_free_resources(pdev);
2578out_request_resources_fail:
2579        iounmap(pdata->ioaddr);
2580out_ioremap_fail:
2581        free_netdev(dev);
2582out_release_io_1:
2583        release_mem_region(res->start, resource_size(res));
2584out_0:
2585        return retval;
2586}
2587
2588#ifdef CONFIG_PM
2589/* This implementation assumes the devices remains powered on its VDDVARIO
2590 * pins during suspend. */
2591
2592/* TODO: implement freeze/thaw callbacks for hibernation.*/
2593
2594static int smsc911x_suspend(struct device *dev)
2595{
2596        struct net_device *ndev = dev_get_drvdata(dev);
2597        struct smsc911x_data *pdata = netdev_priv(ndev);
2598
2599        if (netif_running(ndev)) {
2600                netif_stop_queue(ndev);
2601                netif_device_detach(ndev);
2602        }
2603
2604        /* enable wake on LAN, energy detection and the external PME
2605         * signal. */
2606        smsc911x_reg_write(pdata, PMT_CTRL,
2607                PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ |
2608                PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_);
2609
2610        pm_runtime_disable(dev);
2611        pm_runtime_set_suspended(dev);
2612
2613        return 0;
2614}
2615
2616static int smsc911x_resume(struct device *dev)
2617{
2618        struct net_device *ndev = dev_get_drvdata(dev);
2619        struct smsc911x_data *pdata = netdev_priv(ndev);
2620        unsigned int to = 100;
2621
2622        pm_runtime_enable(dev);
2623        pm_runtime_resume(dev);
2624
2625        /* Note 3.11 from the datasheet:
2626         *      "When the LAN9220 is in a power saving state, a write of any
2627         *       data to the BYTE_TEST register will wake-up the device."
2628         */
2629        smsc911x_reg_write(pdata, BYTE_TEST, 0);
2630
2631        /* poll the READY bit in PMT_CTRL. Any other access to the device is
2632         * forbidden while this bit isn't set. Try for 100ms and return -EIO
2633         * if it failed. */
2634        while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
2635                udelay(1000);
2636
2637        if (to == 0)
2638                return -EIO;
2639
2640        if (netif_running(ndev)) {
2641                netif_device_attach(ndev);
2642                netif_start_queue(ndev);
2643        }
2644
2645        return 0;
2646}
2647
2648static const struct dev_pm_ops smsc911x_pm_ops = {
2649        .suspend        = smsc911x_suspend,
2650        .resume         = smsc911x_resume,
2651};
2652
2653#define SMSC911X_PM_OPS (&smsc911x_pm_ops)
2654
2655#else
2656#define SMSC911X_PM_OPS NULL
2657#endif
2658
2659#ifdef CONFIG_OF
2660static const struct of_device_id smsc911x_dt_ids[] = {
2661        { .compatible = "smsc,lan9115", },
2662        { /* sentinel */ }
2663};
2664MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
2665#endif
2666
2667static const struct acpi_device_id smsc911x_acpi_match[] = {
2668        { "ARMH9118", 0 },
2669        { }
2670};
2671MODULE_DEVICE_TABLE(acpi, smsc911x_acpi_match);
2672
2673static struct platform_driver smsc911x_driver = {
2674        .probe = smsc911x_drv_probe,
2675        .remove = smsc911x_drv_remove,
2676        .driver = {
2677                .name   = SMSC_CHIPNAME,
2678                .pm     = SMSC911X_PM_OPS,
2679                .of_match_table = of_match_ptr(smsc911x_dt_ids),
2680                .acpi_match_table = ACPI_PTR(smsc911x_acpi_match),
2681        },
2682};
2683
2684/* Entry point for loading the module */
2685static int __init smsc911x_init_module(void)
2686{
2687        SMSC_INITIALIZE();
2688        return platform_driver_register(&smsc911x_driver);
2689}
2690
2691/* entry point for unloading the module */
2692static void __exit smsc911x_cleanup_module(void)
2693{
2694        platform_driver_unregister(&smsc911x_driver);
2695}
2696
2697module_init(smsc911x_init_module);
2698module_exit(smsc911x_cleanup_module);
2699